Files
i2som-imx-linux-4.1/drivers/usb
Peter Chen 7d0b0a5dee MLK-13125 usb: phy: phy-mxs-usb: enable weak 1p1 regulator for imx6ul during suspend
For imx6ul PHY, when the system enters suspend, its 1p1 is off by default,
that may cause the PHY get inaccurate USB DP/DM value. If the USB wakeup
is enabled at this time, the unexpected wakeup may occur when the system
enters suspend.

In this patch, when the vbus is there, we enable weak 1p1 during the PHY
suspend API, in that case, the USB DP/DM will be accurate for USB PHY,
then unexpected usb wakeup will not be occurred, especially for the USB
charger is connected scenario. The user needs to enable PHY wakeup for
USB wakeup function using below setting.

echo enabled > /sys/devices/platform/soc/2000000.aips-bus/20c9000.usbphy
/power/wakeup

Cc: Shaojun Wang <shaojun.wang@nxp.com>
Cc: Anson Huang <anson.huang@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
(cherry picked from commit d4e00cd5db37df258a25c7c88233a176e62e5d3b)
2016-09-08 14:59:38 +08:00
..

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.