Linux 3.4.39

This reverts commit c93c85196e which is
commit 01c681d4c7 upstream.

It shouldn't have been applied to the 3.4-stable tree, sorry about that.

Reported-by: William Dauchy <wdauchy@gmail.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-bus-rbd

@@ -51,12 +51,6 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-create_snap
-
-	Create a snapshot:
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
-
 snap_*
 
 	A directory per each snapshot

Documentation/HOWTO

@@ -218,16 +218,16 @@ The development process
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
-  - main 2.6.x kernel tree
-  - 2.6.x.y -stable kernel tree
-  - 2.6.x -git kernel patches
+  - main 3.x kernel tree
+  - 3.x.y -stable kernel tree
+  - 3.x -git kernel patches
   - subsystem specific kernel trees and patches
-  - the 2.6.x -next kernel tree for integration tests
+  - the 3.x -next kernel tree for integration tests
 
-2.6.x kernel tree
+3.x kernel tree
 -----------------
-2.6.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+3.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v3.x/ directory.  Its development
 process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
 	released according to perceived bug status, not according to a
 	preconceived timeline."
 
-2.6.x.y -stable kernel tree
+3.x.y -stable kernel tree
 ---------------------------
-Kernels with 4-part versions are -stable kernels. They contain
+Kernels with 3-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
-regressions discovered in a given 2.6.x kernel.
+regressions discovered in a given 3.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+If no 3.x.y kernel is available, then the highest numbered 3.x
 kernel is the current stable kernel.
 
-2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
 are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
 documents what kinds of changes are acceptable for the -stable tree, and
 how the release process works.
 
-2.6.x -git patches
+3.x -git patches
 ------------------
 These are daily snapshots of Linus' kernel tree which are managed in a
 git repository (hence the name.) These patches are usually released
@@ -317,13 +317,13 @@ revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
 http://patchwork.kernel.org/.
 
-2.6.x -next kernel tree for integration tests
+3.x -next kernel tree for integration tests
 ---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 2.6.x
+Before updates from subsystem trees are merged into the mainline 3.x
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
-	http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
 	http://linux.f-seidel.de/linux-next/pmwiki/
 
 This way, the -next kernel gives a summary outlook onto what will be

Documentation/cgroups/memory.txt

@@ -466,6 +466,10 @@ Note:
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).

Documentation/device-mapper/verity.txt

@@ -7,39 +7,39 @@ This target is read-only.
 
 Construction Parameters
 =======================
-    <version> <dev> <hash_dev> <hash_start>
+    <version> <dev> <hash_dev>
     <data_block_size> <hash_block_size>
     <num_data_blocks> <hash_start_block>
     <algorithm> <digest> <salt>
 
 <version>
-    This is the version number of the on-disk format.
+    This is the type of the on-disk hash format.
 
     0 is the original format used in the Chromium OS.
-	The salt is appended when hashing, digests are stored continuously and
-	the rest of the block is padded with zeros.
+      The salt is appended when hashing, digests are stored continuously and
+      the rest of the block is padded with zeros.
 
     1 is the current format that should be used for new devices.
-	The salt is prepended when hashing and each digest is
-	padded with zeros to the power of two.
+      The salt is prepended when hashing and each digest is
+      padded with zeros to the power of two.
 
 <dev>
-    This is the device containing the data the integrity of which needs to be
+    This is the device containing data, the integrity of which needs to be
     checked.  It may be specified as a path, like /dev/sdaX, or a device number,
     <major>:<minor>.
 
 <hash_dev>
-    This is the device that that supplies the hash tree data.  It may be
+    This is the device that supplies the hash tree data.  It may be
     specified similarly to the device path and may be the same device.  If the
-    same device is used, the hash_start should be outside of the dm-verity
-    configured device size.
+    same device is used, the hash_start should be outside the configured
+    dm-verity device.
 
 <data_block_size>
-    The block size on a data device.  Each block corresponds to one digest on
-    the hash device.
+    The block size on a data device in bytes.
+    Each block corresponds to one digest on the hash device.
 
 <hash_block_size>
-    The size of a hash block.
+    The size of a hash block in bytes.
 
 <num_data_blocks>
     The number of data blocks on the data device.  Additional blocks are
@@ -65,7 +65,7 @@ Construction Parameters
 Theory of operation
 ===================
 
-dm-verity is meant to be setup as part of a verified boot path.  This
+dm-verity is meant to be set up as part of a verified boot path.  This
 may be anything ranging from a boot using tboot or trustedgrub to just
 booting from a known-good device (like a USB drive or CD).
 
@@ -73,20 +73,20 @@ When a dm-verity device is configured, it is expected that the caller
 has been authenticated in some way (cryptographic signatures, etc).
 After instantiation, all hashes will be verified on-demand during
 disk access.  If they cannot be verified up to the root node of the
-tree, the root hash, then the I/O will fail.  This should identify
+tree, the root hash, then the I/O will fail.  This should detect
 tampering with any data on the device and the hash data.
 
 Cryptographic hashes are used to assert the integrity of the device on a
-per-block basis.  This allows for a lightweight hash computation on first read
-into the page cache.  Block hashes are stored linearly-aligned to the nearest
-block the size of a page.
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
 
 Hash Tree
 ---------
 
 Each node in the tree is a cryptographic hash.  If it is a leaf node, the hash
-is of some block data on disk.  If it is an intermediary node, then the hash is
-of a number of child nodes.
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
 
 Each entry in the tree is a collection of neighboring nodes that fit in one
 block.  The number is determined based on block_size and the size of the
@@ -110,63 +110,23 @@ alg = sha256, num_blocks = 32768, block_size = 4096
 On-disk format
 ==============
 
-Below is the recommended on-disk format. The verity kernel code does not
-read the on-disk header. It only reads the hash blocks which directly
-follow the header. It is expected that a user-space tool will verify the
-integrity of the verity_header and then call dmsetup with the correct
-parameters. Alternatively, the header can be omitted and the dmsetup
-parameters can be passed via the kernel command-line in a rooted chain
-of trust where the command-line is verified.
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
 
-The on-disk format is especially useful in cases where the hash blocks
-are on a separate partition. The magic number allows easy identification
-of the partition contents. Alternatively, the hash blocks can be stored
-in the same partition as the data to be verified. In such a configuration
-the filesystem on the partition would be sized a little smaller than
-the full-partition, leaving room for the hash blocks.
-
-struct superblock {
-	uint8_t signature[8]
-		"verity\0\0";
-
-	uint8_t version;
-		1 - current format
-
-	uint8_t data_block_bits;
-		log2(data block size)
-
-	uint8_t hash_block_bits;
-		log2(hash block size)
-
-	uint8_t pad1[1];
-		zero padding
-
-	uint16_t salt_size;
-		big-endian salt size
-
-	uint8_t pad2[2];
-		zero padding
-
-	uint32_t data_blocks_hi;
-		big-endian high 32 bits of the 64-bit number of data blocks
-
-	uint32_t data_blocks_lo;
-		big-endian low 32 bits of the 64-bit number of data blocks
-
-	uint8_t algorithm[16];
-		cryptographic algorithm
-
-	uint8_t salt[384];
-		salt (the salt size is specified above)
-
-	uint8_t pad3[88];
-		zero padding to 512-byte boundary
-}
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
 
 Directly following the header (and with sector number padded to the next hash
 block boundary) are the hash blocks which are stored a depth at a time
 (starting from the root), sorted in order of increasing index.
 
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+  http://code.google.com/p/cryptsetup/wiki/DMVerity
+
 Status
 ======
 V (for Valid) is returned if every check performed so far was valid.
@@ -174,21 +134,22 @@ If any check failed, C (for Corruption) is returned.
 
 Example
 =======
-
-Setup a device:
-  dmsetup create vroot --table \
-    "0 2097152 "\
-    "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+Set up a device:
+  # dmsetup create vroot --readonly --table \
+    "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
     "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
     "1234000000000000000000000000000000000000000000000000000000000000"
 
 A command line tool veritysetup is available to compute or verify
-the hash tree or activate the kernel driver.  This is available from
-the LVM2 upstream repository and may be supplied as a package called
-device-mapper-verity-tools:
-    git://sources.redhat.com/git/lvm2
-    http://sourceware.org/git/?p=lvm2.git
-    http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
+(as a libcryptsetup extension).
 
-veritysetup -a vroot /dev/sda1 /dev/sda2 \
-	4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+Create hash on the device:
+  # veritysetup format /dev/sda1 /dev/sda2
+  ...
+  Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device:
+  # veritysetup create vroot /dev/sda1 /dev/sda2 \
+    4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -8,7 +8,7 @@ PIT Timer required properties:
   shared across all System Controller members.
 
 TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-pit".
+- compatible: Should be "atmel,<chip>-tcb".
   <chip> can be "at91rm9200" or "at91sam9x5"
 - reg: Should contain registers location and length
 - interrupts: Should contain all interrupts for the TC block

Documentation/dvb/get_dvb_firmware

@@ -115,7 +115,7 @@ sub tda10045 {
 
 sub tda10046 {
 	my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
-	my $url = "http://www.tt-download.com/download/updates/219/$sourcefile";
+	my $url = "http://technotrend.com.ua/download/software/219/$sourcefile";
 	my $hash = "6a7e1e2f2644b162ff0502367553c72d";
 	my $outfile = "dvb-fe-tda10046.fw";
 	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

Documentation/i2c/busses/i2c-i801

@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/kernel-parameters.txt

@@ -557,6 +557,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			UART at the specified I/O port or MMIO address,
 			switching to the matching ttyS device later.  The
 			options are the same as for ttyS, above.
+		hvc<n>	Use the hypervisor console device <n>. This is for
+			both Xen and PowerPC hypervisors.
 
                 If the device connected to the port is not a TTY but a braille
                 device, prepend "brl," before the device type, for instance
@@ -742,6 +744,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
+			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
@@ -759,6 +762,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The VGA output is eventually overwritten by the real
 			console.
 
+			The xen output can only be used by Xen PV guests.
+
 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
 			ekgdboc=kbd
 

Documentation/networking/ip-sysctl.txt

@@ -537,6 +537,11 @@ tcp_thin_dupack - BOOLEAN
 	Documentation/networking/tcp-thin.txt
 	Default: 0
 
+tcp_challenge_ack_limit - INTEGER
+	Limits number of Challenge ACK sent per second, as recommended
+	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
+	Default: 100
+
 UDP variables:
 
 udp_mem - vector of 3 INTEGERs: min, pressure, max

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -21,10 +21,11 @@ ALC267/268
 ==========
   N/A
 
-ALC269
+ALC269/270/275/276/280/282
 ======
   laptop-amic	Laptops with analog-mic input
   laptop-dmic	Laptops with digital-mic input
+  lenovo-dock   Enables docking station I/O for some Lenovos
 
 ALC662/663/272
 ==============
@@ -46,6 +47,7 @@ ALC882/883/885/888/889
   acer-aspire-4930g	Acer Aspire 4930G/5930G/6530G/6930G/7730G
   acer-aspire-8930g	Acer Aspire 8330G/6935G
   acer-aspire		Acer Aspire others
+  no-primary-hp		VAIO Z workaround (for fixed speaker DAC)
 
 ALC861/660
 ==========

Documentation/stable_kernel_rules.txt

@@ -1,4 +1,4 @@
-Everything you ever wanted to know about Linux 2.6 -stable releases.
+Everything you ever wanted to know about Linux -stable releases.
 
 Rules on what kind of patches are accepted, and which ones are not, into the
 "-stable" tree:
@@ -12,6 +12,12 @@ Rules on what kind of patches are accepted, and which ones are not, into the
    marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
    security issue, or some "oh, that's not good" issue.  In short, something
    critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+   be considered if they fix a notable performance or interactivity issue.
+   As these fixes are not as obvious and have a higher risk of a subtle
+   regression they should only be submitted by a distribution kernel
+   maintainer and include an addendum linking to a bugzilla entry if it
+   exists and additional information on the user-visible impact.
  - New device IDs and quirks are also accepted.
  - No "theoretical race condition" issues, unless an explanation of how the
    race can be exploited is also provided.
@@ -36,10 +42,10 @@ Procedure for submitting patches to the -stable tree:
    cherry-picked than this can be specified in the following format in
    the sign-off area:
 
-     Cc: <stable@vger.kernel.org> # .32.x: a1f84a3: sched: Check for idle
-     Cc: <stable@vger.kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle
-     Cc: <stable@vger.kernel.org> # .32.x: fd21073: sched: Fix affinity logic
-     Cc: <stable@vger.kernel.org> # .32.x
+     Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
+     Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle
+     Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic
+     Cc: <stable@vger.kernel.org> # 3.3.x
     Signed-off-by: Ingo Molnar <mingo@elte.hu>
 
    The tag sequence has the meaning of:
@@ -73,6 +79,15 @@ Review cycle:
    security kernel team, and not go through the normal review cycle.
    Contact the kernel security team for more details on this procedure.
 
+Trees:
+
+ - The queues of patches, for both completed versions and in progress
+   versions can be found at:
+	http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
+ - The finalized and tagged releases of all stable kernels can be found
+   in separate branches per version at:
+	http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git
+
 
 Review committee:
 

MAINTAINERS

@@ -2627,7 +2627,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -4312,7 +4312,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -4563,7 +4563,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -5566,7 +5566,7 @@ F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
 RANDOM NUMBER DRIVER
-M:	Matt Mackall <mpm@selenic.com>
+M:	Theodore Ts'o" <tytso@mit.edu>
 S:	Maintained
 F:	drivers/char/random.c
 

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 4
-SUBLEVEL = 0
+SUBLEVEL = 39
 EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 

arch/alpha/include/asm/atomic.h

@@ -14,8 +14,8 @@
  */
 
 
-#define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
-#define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
 
 #define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic64_read(v)	(*(volatile long *)&(v)->counter)

arch/alpha/include/asm/fpu.h

@@ -1,7 +1,9 @@
 #ifndef __ASM_ALPHA_FPU_H
 #define __ASM_ALPHA_FPU_H
 
+#ifdef __KERNEL__
 #include <asm/special_insns.h>
+#endif
 
 /*
  * Alpha floating-point control register defines:

arch/alpha/include/asm/socket.h

@@ -76,9 +76,11 @@
 /* Instruct lower device to use last 4-bytes of skb data as FCS */
 #define SO_NOFCS		43
 
+#ifdef __KERNEL__
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
 #define SOCK_NONBLOCK	0x40000000
+#endif /* __KERNEL__ */
 
 #endif /* _ASM_SOCKET_H */

arch/alpha/kernel/process.c

@@ -28,6 +28,7 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/slab.h>
+#include <linux/rcupdate.h>
 
 #include <asm/reg.h>
 #include <asm/uaccess.h>
@@ -54,8 +55,11 @@ cpu_idle(void)
 		/* FIXME -- EV6 and LCA45 know how to power down
 		   the CPU.  */
 
+		rcu_idle_enter();
 		while (!need_resched())
 			cpu_relax();
+
+		rcu_idle_exit();
 		schedule();
 	}
 }

arch/arm/Kconfig

@@ -556,7 +556,7 @@ config ARCH_IXP4XX
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select CLKSRC_MMIO
 	select CPU_XSCALE
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
@@ -579,6 +579,7 @@ config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
 	select PCI
+	select PCI_QUIRKS
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select NEED_MACH_IO_H
@@ -1405,6 +1406,16 @@ config PL310_ERRATA_769419
 	  on systems with an outer cache, the store buffer is drained
 	  explicitly.
 
+config ARM_ERRATA_775420
+       bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+       depends on CPU_V7
+       help
+	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 operation aborts with MMU exception, it might cause the processor
+	 to deadlock. This workaround puts DSB before executing ISB if
+	 an abort may occur on cache maintenance.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -2113,6 +2124,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 

arch/arm/Makefile

@@ -283,10 +283,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

arch/arm/boot/compressed/head.S

@@ -648,6 +648,7 @@ __armv7_mmu_cache_on:
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
 #endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
 #ifdef CONFIG_MMU

arch/arm/boot/dts/imx53-ard.dts

@@ -70,10 +70,30 @@
 			interrupt-parent = <&gpio2>;
 			interrupts = <31>;
 			reg-io-width = <4>;
+			/*
+			 * VDD33A and VDDVARIO of LAN9220 are supplied by
+			 * SW4_3V3 of LTC3589.  Before the regulator driver
+			 * for this PMIC is available, we use a fixed dummy
+			 * 3V3 regulator to get LAN9220 driver probing work.
+			 */
+			vdd33a-supply = <&reg_3p3v>;
+			vddvario-supply = <&reg_3p3v>;
 			smsc,irq-push-pull;
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 

arch/arm/boot/dts/tegra-cardhu.dts

@@ -64,7 +64,7 @@
 		status = "disable";
 	};
 
-	sdhci@78000400 {
+	sdhci@78000600 {
 		support-8bit;
 	};
 };

arch/arm/configs/mxs_defconfig

@@ -32,7 +32,6 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y

arch/arm/include/asm/assembler.h

@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/cacheflush.h

@@ -215,7 +215,9 @@ static inline void vivt_flush_cache_mm(struct mm_struct *mm)
 static inline void
 vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
+	struct mm_struct *mm = vma->vm_mm;
+
+	if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
 					vma->vm_flags);
 }
@@ -223,7 +225,9 @@ vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 static inline void
 vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+	struct mm_struct *mm = vma->vm_mm;
+
+	if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
 		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
 	}
@@ -249,7 +253,7 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
  * Harvard caches are synchronised for the user space address range.
  * This is used for the ARM private sys_cacheflush system call.
  */
-#define flush_cache_user_range(vma,start,end) \
+#define flush_cache_user_range(start,end) \
 	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
 
 /*

arch/arm/include/asm/hwcap.h

@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 #if defined(__KERNEL__)

arch/arm/include/asm/mutex.h

@@ -7,121 +7,10 @@
  */
 #ifndef _ASM_MUTEX_H
 #define _ASM_MUTEX_H
-
-#if __LINUX_ARM_ARCH__ < 6
-/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */
-# include <asm-generic/mutex-xchg.h>
-#else
-
 /*
- * Attempting to lock a mutex on ARMv6+ can be done with a bastardized
- * atomic decrement (it is not a reliable atomic decrement but it satisfies
- * the defined semantics for our purpose, while being smaller and faster
- * than a real atomic decrement or atomic swap.  The idea is to attempt
- * decrementing the lock value only once.  If once decremented it isn't zero,
- * or if its store-back fails due to a dispute on the exclusive store, we
- * simply bail out immediately through the slow path where the lock will be
- * reattempted until it succeeds.
+ * On pre-ARMv6 hardware this results in a swp-based implementation,
+ * which is the most efficient. For ARMv6+, we emit a pair of exclusive
+ * accesses instead.
  */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res;
-
-	__asm__ (
-
-		"ldrex	%0, [%2]	\n\t"
-		"sub	%0, %0, #1	\n\t"
-		"strex	%1, %0, [%2]	"
-
-		: "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__res |= __ex_flag;
-	if (unlikely(__res != 0))
-		fail_fn(count);
-}
-
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res;
-
-	__asm__ (
-
-		"ldrex	%0, [%2]	\n\t"
-		"sub	%0, %0, #1	\n\t"
-		"strex	%1, %0, [%2]	"
-
-		: "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__res |= __ex_flag;
-	if (unlikely(__res != 0))
-		__res = fail_fn(count);
-	return __res;
-}
-
-/*
- * Same trick is used for the unlock fast path. However the original value,
- * rather than the result, is used to test for success in order to have
- * better generated assembly.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res, __orig;
-
-	__asm__ (
-
-		"ldrex	%0, [%3]	\n\t"
-		"add	%1, %0, #1	\n\t"
-		"strex	%2, %1, [%3]	"
-
-		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__orig |= __ex_flag;
-	if (unlikely(__orig != 0))
-		fail_fn(count);
-}
-
-/*
- * If the unlock was done on a contended lock, or if the unlock simply fails
- * then the mutex remains locked.
- */
-#define __mutex_slowpath_needs_to_unlock()	1
-
-/*
- * For __mutex_fastpath_trylock we use another construct which could be
- * described as a "single value cmpxchg".
- *
- * This provides the needed trylock semantics like cmpxchg would, but it is
- * lighter and less generic than a true cmpxchg implementation.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res, __orig;
-
-	__asm__ (
-
-		"1: ldrex	%0, [%3]	\n\t"
-		"subs		%1, %0, #1	\n\t"
-		"strexeq	%2, %1, [%3]	\n\t"
-		"movlt		%0, #0		\n\t"
-		"cmpeq		%2, #0		\n\t"
-		"bgt		1b		"
-
-		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&count->counter)
-		: "cc", "memory" );
-
-	return __orig;
-}
-
-#endif
+#include <asm-generic/mutex-xchg.h>
 #endif

arch/arm/include/asm/pgtable.h

@@ -195,25 +195,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
-#if __LINUX_ARM_ARCH__ < 6
-static inline void __sync_icache_dcache(pte_t pteval)
-{
-}
-#else
-extern void __sync_icache_dcache(pte_t pteval);
-#endif
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
-		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
-	}
-}
-
 #define pte_none(pte)		(!pte_val(pte))
 #define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
 #define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
@@ -226,6 +207,27 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
 	 (L_PTE_PRESENT | L_PTE_USER))
 
+#if __LINUX_ARM_ARCH__ < 6
+static inline void __sync_icache_dcache(pte_t pteval)
+{
+}
+#else
+extern void __sync_icache_dcache(pte_t pteval);
+#endif
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_present_user(pteval)) {
+		__sync_icache_dcache(pteval);
+		ext |= PTE_EXT_NG;
+	}
+
+	set_pte_ext(ptep, pteval, ext);
+}
+
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <- type --> 0 0 0
+ *   <--------------- offset ----------------------> < type -> 0 0 0
  *
- * This gives us up to 63 swap files and 32GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	3
-#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 

arch/arm/include/asm/signal.h

@@ -127,6 +127,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;

arch/arm/include/asm/uaccess.h

@@ -101,28 +101,39 @@ extern int __get_user_1(void *);
 extern int __get_user_2(void *);
 extern int __get_user_4(void *);
 
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+#define __GUP_CLOBBER_1	"lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2	"ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4	"lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
+		: "0" (__p), "r" (__l)					\
+		: __GUP_CLOBBER_##__s)
 
 #define get_user(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
 		register unsigned long __r2 asm("r2");			\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
+			__get_user_x(__r2, __p, __e, __l, 1);		\
+			break;						\
 		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			__get_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			__get_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
@@ -135,31 +146,34 @@ extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2,__p,__e,__s)					\
+#define __put_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__put_user_" #__s				\
 		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
+		: "0" (__p), "r" (__r2), "r" (__l)			\
 		: "ip", "lr", "cc")
 
 #define put_user(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
+			__put_user_x(__r2, __p, __e, __l, 1);		\
 			break;						\
 		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
+			__put_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
+			__put_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
+			__put_user_x(__r2, __p, __e, __l, 8);		\
 			break;						\
 		default: __e = __put_user_bad(); break;			\
 		}							\

arch/arm/include/asm/vfpmacros.h

@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field

arch/arm/kernel/entry-armv.S

@@ -244,6 +244,19 @@ svc_preempt:
 	b	1b
 #endif
 
+__und_fault:
+	@ Correct the PC such that it is pointing at the instruction
+	@ which caused the fault.  If the faulting instruction was ARM
+	@ the PC will be pointing at the next instruction, and have to
+	@ subtract 4.  Otherwise, it is Thumb, and the PC will be
+	@ pointing at the second half of the Thumb instruction.  We
+	@ have to subtract 2.
+	ldr	r2, [r0, #S_PC]
+	sub	r2, r2, r1
+	str	r2, [r0, #S_PC]
+	b	do_undefinstr
+ENDPROC(__und_fault)
+
 	.align	5
 __und_svc:
 #ifdef CONFIG_KPROBES
@@ -261,25 +274,32 @@ __und_svc:
 	@
 	@  r0 - instruction
 	@
-#ifndef	CONFIG_THUMB2_KERNEL
+#ifndef CONFIG_THUMB2_KERNEL
 	ldr	r0, [r4, #-4]
 #else
+	mov	r1, #2
 	ldrh	r0, [r4, #-2]			@ Thumb instruction at LR - 2
 	cmp	r0, #0xe800			@ 32-bit instruction if xx >= 0
-	ldrhhs	r9, [r4]			@ bottom 16 bits
-	orrhs	r0, r9, r0, lsl #16
+	blo	__und_svc_fault
+	ldrh	r9, [r4]			@ bottom 16 bits
+	add	r4, r4, #2
+	str	r4, [sp, #S_PC]
+	orr	r0, r9, r0, lsl #16
 #endif
-	adr	r9, BSYM(1f)
+	adr	r9, BSYM(__und_svc_finish)
 	mov	r2, r4
 	bl	call_fpe
 
+	mov	r1, #4				@ PC correction to apply
+__und_svc_fault:
 	mov	r0, sp				@ struct pt_regs *regs
-	bl	do_undefinstr
+	bl	__und_fault
 
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-1:	disable_irq_notrace
+__und_svc_finish:
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -423,25 +443,33 @@ __und_usr:
 	mov	r2, r4
 	mov	r3, r5
 
+	@ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
+	@      faulting instruction depending on Thumb mode.
+	@ r3 = regs->ARM_cpsr
 	@
-	@ fall through to the emulation code, which returns using r9 if
-	@ it has emulated the instruction, or the more conventional lr
-	@ if we are to treat this as a real undefined instruction
-	@
-	@  r0 - instruction
+	@ The emulation code returns using r9 if it has emulated the
+	@ instruction, or the more conventional lr if we are to treat
+	@ this as a real undefined instruction
 	@
 	adr	r9, BSYM(ret_from_exception)
-	adr	lr, BSYM(__und_usr_unknown)
+
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
-	itet	eq				@ explicit IT needed for the 1f label
-	subeq	r4, r2, #4			@ ARM instr at LR - 4
-	subne	r4, r2, #2			@ Thumb instr at LR - 2
-1:	ldreqt	r0, [r4]
+	bne	__und_usr_thumb
+	sub	r4, r2, #4			@ ARM instr at LR - 4
+1:	ldrt	r0, [r4]
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r0, r0				@ little endian instruction
+	rev	r0, r0				@ little endian instruction
 #endif
-	beq	call_fpe
+	@ r0 = 32-bit ARM instruction which caused the exception
+	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
+	@ r4 = PC value for the faulting instruction
+	@ lr = 32-bit undefined instruction function
+	adr	lr, BSYM(__und_usr_fault_32)
+	b	call_fpe
+
+__und_usr_thumb:
 	@ Thumb instruction
+	sub	r4, r2, #2			@ First half of thumb instr at LR - 2
 #if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
 /*
  * Thumb-2 instruction handling.  Note that because pre-v6 and >= v6 platforms
@@ -455,7 +483,7 @@ __und_usr:
 	ldr	r5, .LCcpu_architecture
 	ldr	r5, [r5]
 	cmp	r5, #CPU_ARCH_ARMv7
-	blo	__und_usr_unknown
+	blo	__und_usr_fault_16		@ 16bit undefined instruction
 /*
  * The following code won't get run unless the running CPU really is v7, so
  * coding round the lack of ldrht on older arches is pointless.  Temporarily
@@ -463,15 +491,18 @@ __und_usr:
  */
 	.arch	armv6t2
 #endif
-2:
- ARM(	ldrht	r5, [r4], #2	)
- THUMB(	ldrht	r5, [r4]	)
- THUMB(	add	r4, r4, #2	)
+2:	ldrht	r5, [r4]
 	cmp	r5, #0xe800			@ 32bit instruction if xx != 0
-	blo	__und_usr_unknown
-3:	ldrht	r0, [r4]
+	blo	__und_usr_fault_16		@ 16bit undefined instruction
+3:	ldrht	r0, [r2]
 	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
+	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
 	orr	r0, r0, r5, lsl #16
+	adr	lr, BSYM(__und_usr_fault_32)
+	@ r0 = the two 16-bit Thumb instructions which caused the exception
+	@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
+	@ r4 = PC value for the first 16-bit Thumb instruction
+	@ lr = 32bit undefined instruction function
 
 #if __LINUX_ARM_ARCH__ < 7
 /* If the target arch was overridden, change it back: */
@@ -482,17 +513,13 @@ __und_usr:
 #endif
 #endif /* __LINUX_ARM_ARCH__ < 7 */
 #else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
-	b	__und_usr_unknown
+	b	__und_usr_fault_16
 #endif
- UNWIND(.fnend		)
+ UNWIND(.fnend)
 ENDPROC(__und_usr)
 
-	@
-	@ fallthrough to call_fpe
-	@
-
 /*
- * The out of line fixup for the ldrt above.
+ * The out of line fixup for the ldrt instructions above.
  */
 	.pushsection .fixup, "ax"
 4:	mov	pc, r9
@@ -523,11 +550,12 @@ ENDPROC(__und_usr)
  * NEON handler code.
  *
  * Emulators may wish to make use of the following registers:
- *  r0  = instruction opcode.
- *  r2  = PC+4
+ *  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+ *  r2  = PC value to resume execution after successful emulation
  *  r9  = normal "successful" return address
- *  r10 = this threads thread_info structure.
+ *  r10 = this threads thread_info structure
  *  lr  = unrecognised instruction return address
+ * IRQs disabled, FIQs enabled.
  */
 	@
 	@ Fall-through from Thumb-2 __und_usr
@@ -662,12 +690,17 @@ ENTRY(no_fp)
 	mov	pc, lr
 ENDPROC(no_fp)
 
-__und_usr_unknown:
-	enable_irq
+__und_usr_fault_32:
+	mov	r1, #4
+	b	1f
+__und_usr_fault_16:
+	mov	r1, #2
+1:	enable_irq
 	mov	r0, sp
 	adr	lr, BSYM(ret_from_exception)
-	b	do_undefinstr
-ENDPROC(__und_usr_unknown)
+	b	__und_fault
+ENDPROC(__und_usr_fault_32)
+ENDPROC(__und_usr_fault_16)
 
 	.align	5
 __pabt_usr:

arch/arm/kernel/hw_breakpoint.c

@@ -159,6 +159,12 @@ static int debug_arch_supported(void)
 		arch >= ARM_DEBUG_ARCH_V7_1;
 }
 
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+	return 0;
+}
+
 /* Determine number of WRP registers available. */
 static int get_num_wrp_resources(void)
 {
@@ -619,18 +625,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
+	if (!bp->overflow_handler) {
+		/*
+		 * Mismatch breakpoints are required for single-stepping
+		 * breakpoints.
+		 */
+		if (!core_has_mismatch_brps())
+			return -EINVAL;
+
+		/* We don't allow mismatch breakpoints in kernel space. */
+		if (arch_check_bp_in_kernelspace(bp))
+			return -EPERM;
+
+		/*
+		 * Per-cpu breakpoints are not supported by our stepping
+		 * mechanism.
+		 */
+		if (!bp->hw.bp_target)
+			return -EINVAL;
+
+		/*
+		 * We only support specific access types if the fsr
+		 * reports them.
+		 */
+		if (!debug_exception_updates_fsr() &&
+		    (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+		     info->ctrl.type == ARM_BREAKPOINT_STORE))
+			return -EINVAL;
 	}
+
 out:
 	return ret;
 }
@@ -706,10 +729,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 				goto unlock;
 
 			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
+			if (debug_exception_updates_fsr()) {
+				access = (fsr & ARM_FSR_ACCESS_MASK) ?
+					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+				if (!(access & hw_breakpoint_type(wp)))
+					goto unlock;
+			}
 
 			/* We have a winner. */
 			info->trigger = addr;

arch/arm/kernel/perf_event_v7.c

@@ -775,7 +775,7 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 /*
  * PMXEVTYPER: Event selection reg
  */
-#define	ARMV7_EVTYPE_MASK	0xc00000ff	/* Mask for writable bits */
+#define	ARMV7_EVTYPE_MASK	0xc80000ff	/* Mask for writable bits */
 #define	ARMV7_EVTYPE_EVENT	0xff		/* Mask for EVENT bits */
 
 /*

arch/arm/kernel/process.c

@@ -267,6 +267,7 @@ void machine_shutdown(void)
 void machine_halt(void)
 {
 	machine_shutdown();
+	local_irq_disable();
 	while (1);
 }
 
@@ -288,6 +289,7 @@ void machine_restart(char *cmd)
 
 	/* Whoops - the platform was unable to reboot. Tell the user! */
 	printk("Reboot failed -- System halted\n");
+	local_irq_disable();
 	while (1);
 }
 

arch/arm/kernel/sched_clock.c

@@ -84,11 +84,11 @@ static void notrace update_sched_clock(void)
 	 * detectable in cyc_to_fixed_sched_clock().
 	 */
 	raw_local_irq_save(flags);
-	cd.epoch_cyc = cyc;
+	cd.epoch_cyc_copy = cyc;
 	smp_wmb();
 	cd.epoch_ns = ns;
 	smp_wmb();
-	cd.epoch_cyc_copy = cyc;
+	cd.epoch_cyc = cyc;
 	raw_local_irq_restore(flags);
 }
 

arch/arm/kernel/smp.c

@@ -249,18 +249,24 @@ static void percpu_timer_setup(void);
 asmlinkage void __cpuinit secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu;
+
+	/*
+	 * The identity mapping is uncached (strongly ordered), so
+	 * switch away from it before attempting any exclusive accesses.
+	 */
+	cpu_switch_mm(mm->pgd, mm);
+	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
 	 */
+	cpu = smp_processor_id();
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
-	cpu_switch_mm(mm->pgd, mm);
-	enter_lazy_tlb(mm, current);
-	local_flush_tlb_all();
 
 	printk("CPU%u: Booted secondary processor\n", cpu);
 
@@ -590,7 +596,8 @@ void smp_send_stop(void)
 
 	cpumask_copy(&mask, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &mask);
-	smp_cross_call(&mask, IPI_CPU_STOP);
+	if (!cpumask_empty(&mask))
+		smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;

arch/arm/kernel/swp_emulate.c

@@ -109,10 +109,12 @@ static void set_segfault(struct pt_regs *regs, unsigned long addr)
 {
 	siginfo_t info;
 
+	down_read(&current->mm->mmap_sem);
 	if (find_vma(current->mm, addr) == NULL)
 		info.si_code = SEGV_MAPERR;
 	else
 		info.si_code = SEGV_ACCERR;
+	up_read(&current->mm->mmap_sem);
 
 	info.si_signo = SIGSEGV;
 	info.si_errno = 0;

arch/arm/kernel/traps.c

@@ -370,18 +370,10 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
 
 asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 {
-	unsigned int correction = thumb_mode(regs) ? 2 : 4;
 	unsigned int instr;
 	siginfo_t info;
 	void __user *pc;
 
-	/*
-	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
-	 * depending whether we're in Thumb mode or not.
-	 * Correct this offset.
-	 */
-	regs->ARM_pc -= correction;
-
 	pc = (void __user *)instruction_pointer(regs);
 
 	if (processor_mode(regs) == SVC_MODE) {
@@ -396,20 +388,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 #endif
 			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
+		if (get_user(instr, (u16 __user *)pc))
+			goto die_sig;
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
+			if (get_user(instr2, (u16 __user *)pc+1))
+				goto die_sig;
 			instr <<= 16;
 			instr |= instr2;
 		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
+	} else if (get_user(instr, (u32 __user *)pc)) {
+		goto die_sig;
 	}
 
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
+die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
@@ -496,7 +491,9 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 		if (end > vma->vm_end)
 			end = vma->vm_end;
 
-		flush_cache_user_range(vma, start, end);
+		up_read(&mm->mmap_sem);
+		flush_cache_user_range(start, end);
+		return;
 	}
 	up_read(&mm->mmap_sem);
 }

arch/arm/lib/getuser.S

@@ -16,8 +16,9 @@
  * __get_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  * Outputs:	r0 is the error code
- *		r2, r3 contains the zero-extended value
+ *		r2 contains the zero-extended value
  *		lr corrupted
  *
  * No other registers must be altered.  (see <asm/uaccess.h>
@@ -27,33 +28,39 @@
  * Note also that it is intended that __get_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__get_user_1)
+	check_uaccess r0, 1, r1, r2, __get_user_bad
 1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
-#ifdef CONFIG_THUMB2_KERNEL
-2: TUSER(ldrb)	r2, [r0]
-3: TUSER(ldrb)	r3, [r0, #1]
+	check_uaccess r0, 2, r1, r2, __get_user_bad
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb	.req	ip
+2:	ldrbt	r2, [r0], #1
+3:	ldrbt	rb, [r0], #0
 #else
-2: TUSER(ldrb)	r2, [r0], #1
-3: TUSER(ldrb)	r3, [r0]
+rb	.req	r0
+2:	ldrb	r2, [r0]
+3:	ldrb	rb, [r0, #1]
 #endif
 #ifndef __ARMEB__
-	orr	r2, r2, r3, lsl #8
+	orr	r2, r2, rb, lsl #8
 #else
-	orr	r2, r3, r2, lsl #8
+	orr	r2, rb, r2, lsl #8
 #endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
+	check_uaccess r0, 4, r1, r2, __get_user_bad
 4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr

arch/arm/lib/putuser.S

@@ -16,6 +16,7 @@
  * __put_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  *		r2, r3 contains the value
  * Outputs:	r0 is the error code
  *		lr corrupted
@@ -27,16 +28,19 @@
  * Note also that it is intended that __put_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__put_user_1)
+	check_uaccess r0, 1, r1, ip, __put_user_bad
 1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
+	check_uaccess r0, 2, r1, ip, __put_user_bad
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
@@ -60,12 +64,14 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
+	check_uaccess r0, 4, r1, ip, __put_user_bad
 4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+	check_uaccess r0, 8, r1, ip, __put_user_bad
 #ifdef CONFIG_THUMB2_KERNEL
 5: TUSER(str)	r2, [r0]
 6: TUSER(str)	r3, [r0, #4]

arch/arm/mach-at91/at91rm9200_devices.c

@@ -463,7 +463,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91rm9200_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -468,7 +468,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9260_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9261_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -542,7 +542,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9263_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9rl_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 

arch/arm/mach-at91/setup.c

@@ -104,6 +104,8 @@ static void __init soc_detect(u32 dbgu_base)
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
+		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 		at91_boot_soc = at91rm9200_soc;
 		break;
 
@@ -146,7 +148,7 @@ static void __init soc_detect(u32 dbgu_base)
 	}
 
 	/* at91sam9g10 */
-	if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+	if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
 		at91_soc_initdata.type = AT91_SOC_SAM9G10;
 		at91_boot_soc = at91sam9261_soc;
 	}

arch/arm/mach-cns3xxx/core.c

@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,

arch/arm/mach-cns3xxx/include/mach/cns3xxx.h

@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET			0x34
 
 #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 
 #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 
 #define PM_CLK_GATE_OFFSET			0x00
 #define PM_SOFT_RST_OFFSET			0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET			0x1C
 
 #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 
 #define TIMER1_COUNTER_OFFSET			0x00
 #define TIMER1_AUTO_RELOAD_OFFSET		0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000

arch/arm/mach-dove/include/mach/bridge-regs.h

@@ -50,5 +50,6 @@
 #define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)
 
 #endif

arch/arm/mach-dove/include/mach/dove.h

@@ -78,6 +78,7 @@
 
 /* North-South Bridge */
 #define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)
 
 /* Cryptographic Engine */
 #define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)

arch/arm/mach-dove/include/mach/pm.h

@@ -45,7 +45,7 @@ static inline int pmu_to_irq(int pin)
 
 static inline int irq_to_pmu(int irq)
 {
-	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
 		return irq - IRQ_DOVE_PMU_START;
 
 	return -EINVAL;

arch/arm/mach-dove/irq.c

@@ -61,8 +61,20 @@ static void pmu_irq_ack(struct irq_data *d)
 	int pin = irq_to_pmu(d->irq);
 	u32 u;
 
+	/*
+	 * The PMU mask register is not RW0C: it is RW.  This means that
+	 * the bits take whatever value is written to them; if you write
+	 * a '1', you will set the interrupt.
+	 *
+	 * Unfortunately this means there is NO race free way to clear
+	 * these interrupts.
+	 *
+	 * So, let's structure the code so that the window is as small as
+	 * possible.
+	 */
 	u = ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_CAUSE);
+	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
+	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
 }
 
 static struct irq_chip pmu_irq_chip = {

arch/arm/mach-imx/crm-regs-imx5.h

@@ -23,7 +23,7 @@
 #define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
 #define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
 #define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
 
 /* PLL Register Offsets */
 #define MXC_PLL_DP_CTL			0x00

arch/arm/mach-imx/hotplug.c

@@ -12,6 +12,7 @@
 
 #include <linux/errno.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <mach/common.h>
 
 int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,28 @@ int platform_cpu_kill(unsigned int cpu)
 	return 1;
 }
 
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -26,12 +49,12 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
+	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)

arch/arm/mach-imx/mach-mx21ads.c

@@ -32,7 +32,7 @@
  * Memory-mapped I/O on MX21ADS base board
  */
 #define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
+#define MX21ADS_MMIO_SIZE        0xc00000
 
 #define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
 		(MX21ADS_MMIO_BASE_ADDR + (offset))

arch/arm/mach-ixp4xx/common.c

@@ -28,6 +28,7 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/export.h>
+#include <linux/gpio.h>
 
 #include <mach/udc.h>
 #include <mach/hardware.h>
@@ -107,7 +108,7 @@ static signed char irq2gpio[32] = {
 	 7,  8,  9, 10, 11, 12, -1, -1,
 };
 
-int gpio_to_irq(int gpio)
+static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
 {
 	int irq;
 
@@ -117,7 +118,6 @@ int gpio_to_irq(int gpio)
 	}
 	return -EINVAL;
 }
-EXPORT_SYMBOL(gpio_to_irq);
 
 int irq_to_gpio(unsigned int irq)
 {
@@ -383,12 +383,56 @@ static struct platform_device *ixp46x_devices[] __initdata = {
 unsigned long ixp4xx_exp_bus_size;
 EXPORT_SYMBOL(ixp4xx_exp_bus_size);
 
+static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	gpio_line_config(gpio, IXP4XX_GPIO_IN);
+
+	return 0;
+}
+
+static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
+					int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
+
+	return 0;
+}
+
+static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	int value;
+
+	gpio_line_get(gpio, &value);
+
+	return value;
+}
+
+static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
+				  int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip ixp4xx_gpio_chip = {
+	.label			= "IXP4XX_GPIO_CHIP",
+	.direction_input	= ixp4xx_gpio_direction_input,
+	.direction_output	= ixp4xx_gpio_direction_output,
+	.get			= ixp4xx_gpio_get_value,
+	.set			= ixp4xx_gpio_set_value,
+	.to_irq			= ixp4xx_gpio_to_irq,
+	.base			= 0,
+	.ngpio			= 16,
+};
+
 void __init ixp4xx_sys_init(void)
 {
 	ixp4xx_exp_bus_size = SZ_16M;
 
 	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
 
+	gpiochip_add(&ixp4xx_gpio_chip);
+
 	if (cpu_is_ixp46x()) {
 		int region;
 

arch/arm/mach-ixp4xx/include/mach/gpio.h

@@ -1,79 +1,2 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/gpio.h
- *
- * IXP4XX GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
- * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_IXP4XX_GPIO_H
-#define __ASM_ARCH_IXP4XX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-	return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-	return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-#include <asm-generic/gpio.h>			/* cansleep wrappers */
-
-extern int gpio_to_irq(int gpio);
-#define gpio_to_irq gpio_to_irq
-extern int irq_to_gpio(unsigned int irq);
-
-#endif
+/* empty */
 

arch/arm/mach-kirkwood/include/mach/bridge-regs.h

@@ -38,6 +38,7 @@
 #define IRQ_MASK_HIGH_OFF	0x0014
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
 
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -80,6 +80,7 @@
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
 
 #define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
 

arch/arm/mach-kirkwood/pcie.c

@@ -212,14 +212,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void __devinit rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;

arch/arm/mach-mv78xx0/include/mach/bridge-regs.h

@@ -31,5 +31,6 @@
 #define IRQ_MASK_HIGH_OFF	0x0014
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
 
 #endif

arch/arm/mach-mv78xx0/include/mach/mv78xx0.h

@@ -42,6 +42,7 @@
 #define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
 #define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
 #define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
 #define MV78XX0_CORE_REGS_SIZE		SZ_16K
 
 #define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
@@ -59,6 +60,7 @@
  * Core-specific peripheral registers.
  */
 #define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE	(MV78XX0_CORE_REGS_PHYS_BASE)
 
 /*
  * Register Map

arch/arm/mach-omap2/opp.c

@@ -53,7 +53,7 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 	omap_table_init = 1;
 
 	/* Lets now register with OPP library */
-	for (i = 0; i < opp_def_size; i++) {
+	for (i = 0; i < opp_def_size; i++, opp_def++) {
 		struct omap_hwmod *oh;
 		struct device *dev;
 
@@ -86,7 +86,6 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 					__func__, opp_def->freq,
 					opp_def->hwmod_name, i, r);
 		}
-		opp_def++;
 	}
 
 	return 0;

arch/arm/mach-orion5x/include/mach/bridge-regs.h

@@ -35,5 +35,5 @@
 #define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
 
 #define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE | 0x300)
 #endif

arch/arm/mach-orion5x/include/mach/orion5x.h

@@ -82,6 +82,7 @@
 #define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
 
 #define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x20000)
 
 #define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
 

arch/arm/mach-pxa/include/mach/mfp-pxa27x.h

@@ -462,6 +462,9 @@
 	GPIO76_LCD_PCLK,	\
 	GPIO77_LCD_BIAS
 
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
 
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */

arch/arm/mach-pxa/include/mach/smemc.h

@@ -37,6 +37,7 @@
 #define CSADRCFG1	(SMEMC_VIRT + 0x84)  /* Address Configuration Register for CS1 */
 #define CSADRCFG2	(SMEMC_VIRT + 0x88)  /* Address Configuration Register for CS2 */
 #define CSADRCFG3	(SMEMC_VIRT + 0x8C)  /* Address Configuration Register for CS3 */
+#define CSMSADRCFG	(SMEMC_VIRT + 0xA0)  /* Chip Select Configuration Register */
 
 /*
  * More handy macros for PCMCIA

arch/arm/mach-pxa/pxa27x.c

@@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
+	GPIO113_AC97_nRESET_GPIO_HIGH,
 	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
+	GPIO95_AC97_nRESET_GPIO_HIGH,
 	GPIO95_AC97_nRESET,
 };
 

arch/arm/mach-pxa/raumfeld.c

@@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
 
 static struct eeti_ts_platform_data eeti_ts_pdata = {
 	.irq_active_high = 1,
+	.irq_gpio = GPIO_TOUCH_IRQ,
 };
 
 static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
 	.type	= "eeti_ts",
 	.addr	= 0x0a,
-	.irq	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
 	.platform_data = &eeti_ts_pdata,
 };
 

arch/arm/mach-pxa/smemc.c

@@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void)
 	__raw_writel(csadrcfg[1], CSADRCFG1);
 	__raw_writel(csadrcfg[2], CSADRCFG2);
 	__raw_writel(csadrcfg[3], CSADRCFG3);
+	/* CSMSADRCFG wakes up in its default state (0), so we need to set it */
+	__raw_writel(0x2, CSMSADRCFG);
 }
 
 static struct syscore_ops smemc_syscore_ops = {
@@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_ops = {
 
 static int __init smemc_init(void)
 {
-	if (cpu_is_pxa3xx())
+	if (cpu_is_pxa3xx()) {
+		/*
+		 * The only documentation we have on the
+		 * Chip Select Configuration Register (CSMSADRCFG) is that
+		 * it must be programmed to 0x2.
+		 * Moreover, in the bit definitions, the second bit
+		 * (CSMSADRCFG[1]) is called "SETALWAYS".
+		 * Other bits are reserved in this register.
+		 */
+		__raw_writel(0x2, CSMSADRCFG);
+
 		register_syscore_ops(&smemc_syscore_ops);
+	}
 
 	return 0;
 }

arch/arm/mach-realview/include/mach/board-eb.h

@@ -47,7 +47,7 @@
 #define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
 
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x10100000
 #define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
 #else

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

@@ -40,17 +40,17 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		moveq	\rd, \rd, lsr #SHIFT_2440TXF
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
 	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
@@ -68,18 +68,18 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 
 10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
 	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 	.endm
 

arch/arm/mach-s3c24xx/include/mach/dma.h

@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,

arch/arm/mach-s3c24xx/include/mach/entry-macro.S

@@ -31,10 +31,10 @@
 
 		@@ try the interrupt offset register, since it is there
 
-		ldr	\irqstat, [ \base, #INTPND ]
+		ldr	\irqstat, [\base, #INTPND ]
 		teq	\irqstat, #0
 		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
+		ldr	\irqnr, [\base, #INTOFFSET ]
 		mov	\tmp, #1
 		tst	\irqstat, \tmp, lsl \irqnr
 		bne	1001f

arch/arm/mach-s3c24xx/pm-h1940.S

@@ -30,4 +30,4 @@
 
 h1940_pm_return:
 	mov	r0, #S3C2410_PA_GPIO
-	ldr	pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
+	ldr	pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]

arch/arm/mach-s3c24xx/sleep-s3c2410.S

@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
 	ldr	r4, =S3C2410_REFRESH
 	ldr	r5, =S3C24XX_MISCCR
 	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+	ldr	r7, [r4]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [r5]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [r6]		@ get CLKCON (and ensure in TLB)
 
 	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
 	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
 	@@ align next bit of code to cache line
 	.align	5
 s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
+	streq	r7, [r4]			@ SDRAM sleep command
+	streq	r8, [r5]			@ SDRAM power-down config
+	streq	r9, [r6]			@ CPU sleep
 1:	beq	1b
 	mov	pc, r14

arch/arm/mach-s3c24xx/sleep-s3c2412.S

@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
 	 * retry, as simply returning causes the system to lock.
 	*/
 
-	ldrne	r9, [ r1 ]
-	strne	r9, [ r1 ]
-	ldrne	r9, [ r2 ]
-	strne	r9, [ r2 ]
-	ldrne	r9, [ r3 ]
-	strne	r9, [ r3 ]
+	ldrne	r9, [r1]
+	strne	r9, [r1]
+	ldrne	r9, [r2]
+	strne	r9, [r2]
+	ldrne	r9, [r3]
+	strne	r9, [r3]
 	bne	s3c2412_sleep_enter1
 
 	mov	pc, r14

arch/arm/mach-tegra/reset.c

@@ -33,7 +33,7 @@
 
 static bool is_enabled;
 
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
 {
 	void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
 	void __iomem *evp_cpu_reset =

arch/arm/mm/alignment.c

@@ -750,7 +750,6 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	unsigned long instr = 0, instrptr;
 	int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
 	unsigned int type;
-	mm_segment_t fs;
 	unsigned int fault;
 	u16 tinstr = 0;
 	int isize = 4;
@@ -761,16 +760,15 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	instrptr = instruction_pointer(regs);
 
-	fs = get_fs();
-	set_fs(KERNEL_DS);
 	if (thumb_mode(regs)) {
-		fault = __get_user(tinstr, (u16 *)(instrptr & ~1));
+		u16 *ptr = (u16 *)(instrptr & ~1);
+		fault = probe_kernel_address(ptr, tinstr);
 		if (!fault) {
 			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
 			    IS_T32(tinstr)) {
 				/* Thumb-2 32-bit */
 				u16 tinst2 = 0;
-				fault = __get_user(tinst2, (u16 *)(instrptr+2));
+				fault = probe_kernel_address(ptr + 1, tinst2);
 				instr = (tinstr << 16) | tinst2;
 				thumb2_32b = 1;
 			} else {
@@ -779,8 +777,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 			}
 		}
 	} else
-		fault = __get_user(instr, (u32 *)instrptr);
-	set_fs(fs);
+		fault = probe_kernel_address(instrptr, instr);
 
 	if (fault) {
 		type = TYPE_FAULT;

arch/arm/mm/cache-v7.S

@@ -211,6 +211,9 @@ ENTRY(v7_coherent_user_range)
  * isn't mapped, just try the next page.
  */
 9001:
+#ifdef CONFIG_ARM_ERRATA_775420
+	dsb
+#endif
 	mov	r12, r12, lsr #12
 	mov	r12, r12, lsl #12
 	add	r12, r12, #4096

arch/arm/mm/dma-mapping.c

@@ -503,25 +503,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t size, enum dma_data_direction dir,
 	void (*op)(const void *, size_t, int))
 {
+	unsigned long pfn;
+	size_t left = size;
+
+	pfn = page_to_pfn(page) + offset / PAGE_SIZE;
+	offset %= PAGE_SIZE;
+
 	/*
 	 * A single sg entry may refer to multiple physically contiguous
 	 * pages.  But we still need to process highmem pages individually.
 	 * If highmem is not configured then the bulk of this loop gets
 	 * optimized out.
 	 */
-	size_t left = size;
 	do {
 		size_t len = left;
 		void *vaddr;
 
+		page = pfn_to_page(pfn);
+
 		if (PageHighMem(page)) {
-			if (len + offset > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset / PAGE_SIZE;
-					offset %= PAGE_SIZE;
-				}
+			if (len + offset > PAGE_SIZE)
 				len = PAGE_SIZE - offset;
-			}
 			vaddr = kmap_high_get(page);
 			if (vaddr) {
 				vaddr += offset;
@@ -538,7 +540,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 			op(vaddr, len, dir);
 		}
 		offset = 0;
-		page++;
+		pfn++;
 		left -= len;
 	} while (left);
 }

arch/arm/mm/flush.c

@@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval)
 	struct page *page;
 	struct address_space *mapping;
 
-	if (!pte_present_user(pteval))
-		return;
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
 		/* only flush non-aliasing VIPT caches for exec mappings */
 		return;

arch/arm/mm/mm.h

@@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 /* permanent static mappings from iotable_init() */
 #define VM_ARM_STATIC_MAPPING	0x40000000
 
+/* empty mapping */
+#define VM_ARM_EMPTY_MAPPING	0x20000000
+
 /* mapping type (attributes) for permanent static mappings */
 #define VM_ARM_MTYPE(mt)		((mt) << 20)
 #define VM_ARM_MTYPE_MASK	(0x1f << 20)

arch/arm/mm/mmu.c

@@ -497,7 +497,7 @@ static void __init build_mem_type_table(void)
 #endif
 
 	for (i = 0; i < 16; i++) {
-		unsigned long v = pgprot_val(protection_map[i]);
+		pteval_t v = pgprot_val(protection_map[i]);
 		protection_map[i] = __pgprot(v | user_pgprot);
 	}
 
@@ -783,6 +783,79 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 	}
 }
 
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h).  However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings.  This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+	struct vm_struct *vm;
+
+	vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+	vm->addr = (void *)addr;
+	vm->size = SECTION_SIZE;
+	vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
+	vm->caller = pmd_empty_section_gap;
+	vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+	struct vm_struct *vm;
+	unsigned long addr, next = 0;
+	pmd_t *pmd;
+
+	/* we're still single threaded hence no lock needed here */
+	for (vm = vmlist; vm; vm = vm->next) {
+		if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
+			continue;
+		addr = (unsigned long)vm->addr;
+		if (addr < next)
+			continue;
+
+		/*
+		 * Check if this vm starts on an odd section boundary.
+		 * If so and the first section entry for this PMD is free
+		 * then we block the corresponding virtual address.
+		 */
+		if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+			pmd = pmd_off_k(addr);
+			if (pmd_none(*pmd))
+				pmd_empty_section_gap(addr & PMD_MASK);
+		}
+
+		/*
+		 * Then check if this vm ends on an odd section boundary.
+		 * If so and the second section entry for this PMD is empty
+		 * then we block the corresponding virtual address.
+		 */
+		addr += vm->size;
+		if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+			pmd = pmd_off_k(addr) + 1;
+			if (pmd_none(*pmd))
+				pmd_empty_section_gap(addr);
+		}
+
+		/* no need to look at any vm entry until we hit the next PMD */
+		next = (addr + PMD_SIZE - 1) & PMD_MASK;
+	}
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
 static void * __initdata vmalloc_min =
 	(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 
@@ -1064,6 +1137,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 */
 	if (mdesc->map_io)
 		mdesc->map_io();
+	fill_pmd_gaps();
 
 	/*
 	 * Finally flush the caches and tlb to ensure that we're in a

arch/arm/mm/tlb-v7.S

@@ -39,10 +39,18 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
 	asid	r3, r3				@ mask ASID
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(W(mov)	r3, #0	)
+	ALT_UP(W(nop)		)
+#endif
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(mcr	p15, 0, r0, c8, c3, 3)	@ TLB invalidate U MVA all ASID (shareable)
+#else
 	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
+#endif
 	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
 
 	add	r0, r0, #PAGE_SZ
@@ -67,7 +75,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	r0, r0, lsl #PAGE_SHIFT
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(mcr	p15, 0, r0, c8, c3, 3)	@ TLB invalidate U MVA all ASID (shareable)
+#else
 	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
+#endif
 	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1

arch/arm/plat-omap/counter_32k.c

@@ -50,22 +50,29 @@ static u32 notrace omap_32k_read_sched_clock(void)
  * nsecs and adds to a monotonically increasing timespec.
  */
 static struct timespec persistent_ts;
-static cycles_t cycles, last_cycles;
+static cycles_t cycles;
 static unsigned int persistent_mult, persistent_shift;
+static DEFINE_SPINLOCK(read_persistent_clock_lock);
+
 void read_persistent_clock(struct timespec *ts)
 {
 	unsigned long long nsecs;
-	cycles_t delta;
-	struct timespec *tsp = &persistent_ts;
+	cycles_t last_cycles;
+	unsigned long flags;
+
+	spin_lock_irqsave(&read_persistent_clock_lock, flags);
 
 	last_cycles = cycles;
 	cycles = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
-	delta = cycles - last_cycles;
 
-	nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift);
+	nsecs = clocksource_cyc2ns(cycles - last_cycles,
+					persistent_mult, persistent_shift);
 
-	timespec_add_ns(tsp, nsecs);
-	*ts = *tsp;
+	timespec_add_ns(&persistent_ts, nsecs);
+
+	*ts = persistent_ts;
+
+	spin_unlock_irqrestore(&read_persistent_clock_lock, flags);
 }
 
 int __init omap_init_clocksource_32k(void)

arch/arm/plat-omap/dmtimer.c

@@ -238,7 +238,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 

arch/arm/plat-orion/common.c

@@ -570,7 +570,7 @@ void __init orion_spi_1_init(unsigned long mapbase,
 static struct orion_wdt_platform_data orion_wdt_data;
 
 static struct resource orion_wdt_resource =
-		DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
 
 static struct platform_device orion_wdt_device = {
 	.name		= "orion_wdt",

arch/arm/plat-s3c24xx/dma.c

@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);

arch/arm/plat-s5p/clock.c

@@ -38,6 +38,7 @@ struct clk clk_ext_xtal_mux = {
 struct clk clk_xusbxti = {
 	.name		= "xusbxti",
 	.id		= -1,
+	.rate		= 24000000,
 };
 
 struct clk s5p_clk_27m = {

arch/arm/plat-samsung/adc.c

@@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client,
 		return -EINVAL;
 	}
 
-	if (client->is_ts && adc->ts_pend)
-		return -EAGAIN;
-
 	spin_lock_irqsave(&adc->lock, flags);
 
+	if (client->is_ts && adc->ts_pend) {
+		spin_unlock_irqrestore(&adc->lock, flags);
+		return -EAGAIN;
+	}
+
 	client->channel = channel;
 	client->nr_samples = nr_samples;
 

arch/arm/plat-samsung/include/plat/debug-macro.S

@@ -14,12 +14,12 @@
 /* The S5PV210/S5PC110 implementations are as belows. */
 
 	.macro fifo_level_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -27,7 +27,7 @@
  * most widely re-used */
 
 	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -36,7 +36,7 @@
 #endif
 
 	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -45,11 +45,11 @@
 #endif
 
 	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
+		strb 	\rd, [\rx, # S3C2410_UTXH]
 	.endm
 
 	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -60,7 +60,7 @@
 
 1001:
 		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -68,7 +68,7 @@
 	.endm
 
 	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -79,7 +79,7 @@
 		b	1002f
 1001:
 		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 

arch/arm/plat-samsung/include/plat/map-s3c.h

@@ -22,7 +22,7 @@
 #define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
 
 #define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
 
 #define S3C2410_PA_UART		(0x50000000)
 #define S3C24XX_PA_UART		S3C2410_PA_UART

arch/arm/plat-samsung/include/plat/watchdog-reset.h

@@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void)
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
 
-	if (s3c2410_wdtclk)
+	if (!IS_ERR(s3c2410_wdtclk))
 		clk_enable(s3c2410_wdtclk);
 
 	/* put initial values into count and data */

arch/arm/vfp/entry.S

@@ -7,20 +7,22 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Basic entry code, called from the kernel's undefined instruction trap.
- *  r0  = faulted instruction
- *  r5  = faulted PC+4
- *  r9  = successful return
- *  r10 = thread_info structure
- *  lr  = failure return
  */
 #include <asm/thread_info.h>
 #include <asm/vfpmacros.h>
 #include "../kernel/entry-header.S"
 
+@ VFP entry point.
+@
+@  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@  r2  = PC value to resume execution after successful emulation
+@  r9  = normal "successful" return address
+@  r10 = this threads thread_info structure
+@  lr  = unrecognised instruction return address
+@  IRQs disabled.
+@
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	add	r11, r4, #1		@ increment it
 	str	r11, [r10, #TI_PREEMPT]
@@ -33,7 +35,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -51,7 +53,7 @@ ENDPROC(vfp_null_entry)
 
 	__INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it

arch/arm/vfp/vfphw.S

@@ -61,13 +61,13 @@
 
 @ VFP hardware support entry point.
 @
-@  r0  = faulted instruction
-@  r2  = faulted PC+4
-@  r9  = successful return
+@  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@  r2  = PC value to resume execution after successful emulation
+@  r9  = normal "successful" return address
 @  r10 = vfp_state union
 @  r11 = CPU number
-@  lr  = failure return
-
+@  lr  = unrecognised instruction return address
+@  IRQs enabled.
 ENTRY(vfp_support_entry)
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
@@ -161,10 +161,13 @@ vfp_hw_state_valid:
 					@ exception before retrying branch
 					@ out before setting an FPEXC that
 					@ stops us reading stuff
-	VFPFMXR	FPEXC, r1		@ restore FPEXC last
-	sub	r2, r2, #4
-	str	r2, [sp, #S_PC]		@ retry the instruction
-#ifdef CONFIG_PREEMPT
+	VFPFMXR	FPEXC, r1		@ Restore FPEXC last
+	sub	r2, r2, #4		@ Retry current instruction - if Thumb
+	str	r2, [sp, #S_PC]		@ mode it's two 16-bit instructions,
+					@ else it's one 32-bit instruction, so
+					@ always subtract 4 from the following
+					@ instruction address.
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -188,7 +191,7 @@ look_for_VFP_exceptions:
 	@ not recognised by VFP
 
 	DBGSTR	"not VFP"
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it

arch/arm/vfp/vfpmodule.c

@@ -413,7 +413,7 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	 * If there isn't a second FP instruction, exit now. Note that
 	 * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1.
 	 */
-	if (fpexc ^ (FPEXC_EX | FPEXC_FP2V))
+	if ((fpexc & (FPEXC_EX | FPEXC_FP2V)) != (FPEXC_EX | FPEXC_FP2V))
 		goto exit;
 
 	/*
@@ -457,10 +457,16 @@ static int vfp_pm_suspend(void)
 
 		/* disable, just in case */
 		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+	} else if (vfp_current_hw_state[ti->cpu]) {
+#ifndef CONFIG_SMP
+		fmxr(FPEXC, fpexc | FPEXC_EN);
+		vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc);
+		fmxr(FPEXC, fpexc);
+#endif
 	}
 
 	/* clear any information we had about last context state */
-	memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state));
+	vfp_current_hw_state[ti->cpu] = NULL;
 
 	return 0;
 }
@@ -695,11 +701,14 @@ static int __init vfp_init(void)
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
+			 * Check for VFPv3 D16 and VFPv4 D16.  CPUs in
+			 * this configuration only have 16 x 64bit
+			 * registers.
 			 */
 			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
+				elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+			else
+				elf_hwcap |= HWCAP_VFPD32;
 		}
 #endif
 		/*
@@ -713,8 +722,10 @@ static int __init vfp_init(void)
 			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
 				elf_hwcap |= HWCAP_NEON;
 #endif
+#ifdef CONFIG_VFPv3
 			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
 				elf_hwcap |= HWCAP_VFPv4;
+#endif
 		}
 	}
 	return 0;

arch/avr32/include/asm/signal.h

@@ -128,6 +128,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;

arch/cris/include/asm/io.h

@@ -133,12 +133,39 @@ static inline void writel(unsigned int b, volatile void __iomem *addr)
 #define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0)
 #define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0)
 #define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0)
-#define outb(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,1,1)
-#define outw(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,2,1)
-#define outl(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,4,1)
-#define outsb(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,1,count)
-#define outsw(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,2,count)
-#define outsl(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,3,count)
+static inline void outb(unsigned char data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 1, 1);
+}
+static inline void outw(unsigned short data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 2, 1);
+}
+static inline void outl(unsigned int data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 4, 1);
+}
+static inline void outsb(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 1, count);
+}
+static inline void outsw(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 2, count);
+}
+static inline void outsl(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 4, count);
+}
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem