To support the trust boot chain, we integrate the authentication into the kernel image loading process. The kernel image will be verified at its load address. So when signing the kernel image, we need to use this load address which may change on different platforms. Signed-off-by: Ye Li <ye.li@nxp.com>
809 lines
19 KiB
C
809 lines
19 KiB
C
/*
|
|
* (C) Copyright 2000-2009
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Boot support
|
|
*/
|
|
#include <common.h>
|
|
#include <bootm.h>
|
|
#include <command.h>
|
|
#include <environment.h>
|
|
#include <errno.h>
|
|
#include <image.h>
|
|
#include <lmb.h>
|
|
#include <malloc.h>
|
|
#include <mapmem.h>
|
|
#include <nand.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/err.h>
|
|
#include <u-boot/zlib.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_CMD_IMI)
|
|
static int image_info(unsigned long addr);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_IMLS)
|
|
#include <flash.h>
|
|
#include <mtd/cfi_flash.h>
|
|
extern flash_info_t flash_info[]; /* info for FLASH chips */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_IMLS) || defined(CONFIG_CMD_IMLS_NAND)
|
|
static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
|
|
#endif
|
|
|
|
bootm_headers_t images; /* pointers to os/initrd/fdt images */
|
|
|
|
/* we overload the cmd field with our state machine info instead of a
|
|
* function pointer */
|
|
static cmd_tbl_t cmd_bootm_sub[] = {
|
|
U_BOOT_CMD_MKENT(start, 0, 1, (void *)BOOTM_STATE_START, "", ""),
|
|
U_BOOT_CMD_MKENT(loados, 0, 1, (void *)BOOTM_STATE_LOADOS, "", ""),
|
|
#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
|
|
U_BOOT_CMD_MKENT(ramdisk, 0, 1, (void *)BOOTM_STATE_RAMDISK, "", ""),
|
|
#endif
|
|
#ifdef CONFIG_OF_LIBFDT
|
|
U_BOOT_CMD_MKENT(fdt, 0, 1, (void *)BOOTM_STATE_FDT, "", ""),
|
|
#endif
|
|
U_BOOT_CMD_MKENT(cmdline, 0, 1, (void *)BOOTM_STATE_OS_CMDLINE, "", ""),
|
|
U_BOOT_CMD_MKENT(bdt, 0, 1, (void *)BOOTM_STATE_OS_BD_T, "", ""),
|
|
U_BOOT_CMD_MKENT(prep, 0, 1, (void *)BOOTM_STATE_OS_PREP, "", ""),
|
|
U_BOOT_CMD_MKENT(fake, 0, 1, (void *)BOOTM_STATE_OS_FAKE_GO, "", ""),
|
|
U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""),
|
|
};
|
|
|
|
static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
int ret = 0;
|
|
long state;
|
|
cmd_tbl_t *c;
|
|
|
|
c = find_cmd_tbl(argv[0], &cmd_bootm_sub[0], ARRAY_SIZE(cmd_bootm_sub));
|
|
argc--; argv++;
|
|
|
|
if (c) {
|
|
state = (long)c->cmd;
|
|
if (state == BOOTM_STATE_START)
|
|
state |= BOOTM_STATE_FINDOS | BOOTM_STATE_FINDOTHER;
|
|
} else {
|
|
/* Unrecognized command */
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
if (((state & BOOTM_STATE_START) != BOOTM_STATE_START) &&
|
|
images.state >= state) {
|
|
printf("Trying to execute a command out of order\n");
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
ret = do_bootm_states(cmdtp, flag, argc, argv, state, &images, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*******************************************************************/
|
|
/* bootm - boot application image from image in memory */
|
|
/*******************************************************************/
|
|
|
|
int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
#ifdef CONFIG_NEEDS_MANUAL_RELOC
|
|
static int relocated = 0;
|
|
|
|
if (!relocated) {
|
|
int i;
|
|
|
|
/* relocate names of sub-command table */
|
|
for (i = 0; i < ARRAY_SIZE(cmd_bootm_sub); i++)
|
|
cmd_bootm_sub[i].name += gd->reloc_off;
|
|
|
|
relocated = 1;
|
|
}
|
|
#endif
|
|
|
|
/* determine if we have a sub command */
|
|
argc--; argv++;
|
|
if (argc > 0) {
|
|
char *endp;
|
|
|
|
simple_strtoul(argv[0], &endp, 16);
|
|
/* endp pointing to NULL means that argv[0] was just a
|
|
* valid number, pass it along to the normal bootm processing
|
|
*
|
|
* If endp is ':' or '#' assume a FIT identifier so pass
|
|
* along for normal processing.
|
|
*
|
|
* Right now we assume the first arg should never be '-'
|
|
*/
|
|
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
|
|
return do_bootm_subcommand(cmdtp, flag, argc, argv);
|
|
}
|
|
|
|
#ifdef CONFIG_SECURE_BOOT
|
|
extern uint32_t authenticate_image(
|
|
uint32_t ddr_start, uint32_t image_size);
|
|
|
|
switch (genimg_get_format((const void *)load_addr)) {
|
|
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
|
|
case IMAGE_FORMAT_LEGACY:
|
|
if (authenticate_image(load_addr,
|
|
image_get_image_size((image_header_t *)load_addr)) == 0) {
|
|
printf("Authenticate uImage Fail, Please check\n");
|
|
return 1;
|
|
}
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ANDROID_BOOT_IMAGE
|
|
case IMAGE_FORMAT_ANDROID:
|
|
/* Do this authentication in boota command */
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("Not valid image format for Authentication, Please check\n");
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
return do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START |
|
|
BOOTM_STATE_FINDOS | BOOTM_STATE_FINDOTHER |
|
|
BOOTM_STATE_LOADOS |
|
|
#if defined(CONFIG_PPC) || defined(CONFIG_MIPS)
|
|
BOOTM_STATE_OS_CMDLINE |
|
|
#endif
|
|
BOOTM_STATE_OS_PREP | BOOTM_STATE_OS_FAKE_GO |
|
|
BOOTM_STATE_OS_GO, &images, 1);
|
|
}
|
|
|
|
int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
|
|
{
|
|
const char *ep = getenv("autostart");
|
|
|
|
if (ep && !strcmp(ep, "yes")) {
|
|
char *local_args[2];
|
|
local_args[0] = (char *)cmd;
|
|
local_args[1] = NULL;
|
|
printf("Automatic boot of image at addr 0x%08lX ...\n", load_addr);
|
|
return do_bootm(cmdtp, 0, 1, local_args);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
static char bootm_help_text[] =
|
|
"[addr [arg ...]]\n - boot application image stored in memory\n"
|
|
"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
|
|
"\t'arg' can be the address of an initrd image\n"
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
"\tWhen booting a Linux kernel which requires a flat device-tree\n"
|
|
"\ta third argument is required which is the address of the\n"
|
|
"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
|
|
"\tuse a '-' for the second argument. If you do not pass a third\n"
|
|
"\ta bd_info struct will be passed instead\n"
|
|
#endif
|
|
#if defined(CONFIG_FIT)
|
|
"\t\nFor the new multi component uImage format (FIT) addresses\n"
|
|
"\tmust be extened to include component or configuration unit name:\n"
|
|
"\taddr:<subimg_uname> - direct component image specification\n"
|
|
"\taddr#<conf_uname> - configuration specification\n"
|
|
"\tUse iminfo command to get the list of existing component\n"
|
|
"\timages and configurations.\n"
|
|
#endif
|
|
"\nSub-commands to do part of the bootm sequence. The sub-commands "
|
|
"must be\n"
|
|
"issued in the order below (it's ok to not issue all sub-commands):\n"
|
|
"\tstart [addr [arg ...]]\n"
|
|
"\tloados - load OS image\n"
|
|
#if defined(CONFIG_SYS_BOOT_RAMDISK_HIGH)
|
|
"\tramdisk - relocate initrd, set env initrd_start/initrd_end\n"
|
|
#endif
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
"\tfdt - relocate flat device tree\n"
|
|
#endif
|
|
"\tcmdline - OS specific command line processing/setup\n"
|
|
"\tbdt - OS specific bd_t processing\n"
|
|
"\tprep - OS specific prep before relocation or go\n"
|
|
#if defined(CONFIG_TRACE)
|
|
"\tfake - OS specific fake start without go\n"
|
|
#endif
|
|
"\tgo - start OS";
|
|
#endif
|
|
|
|
U_BOOT_CMD(
|
|
bootm, CONFIG_SYS_MAXARGS, 1, do_bootm,
|
|
"boot application image from memory", bootm_help_text
|
|
);
|
|
|
|
/*******************************************************************/
|
|
/* bootd - boot default image */
|
|
/*******************************************************************/
|
|
#if defined(CONFIG_CMD_BOOTD)
|
|
int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
return run_command(getenv("bootcmd"), flag);
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
boot, 1, 1, do_bootd,
|
|
"boot default, i.e., run 'bootcmd'",
|
|
""
|
|
);
|
|
|
|
/* keep old command name "bootd" for backward compatibility */
|
|
U_BOOT_CMD(
|
|
bootd, 1, 1, do_bootd,
|
|
"boot default, i.e., run 'bootcmd'",
|
|
""
|
|
);
|
|
|
|
#endif
|
|
|
|
|
|
/*******************************************************************/
|
|
/* iminfo - print header info for a requested image */
|
|
/*******************************************************************/
|
|
#if defined(CONFIG_CMD_IMI)
|
|
static int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int arg;
|
|
ulong addr;
|
|
int rcode = 0;
|
|
|
|
if (argc < 2) {
|
|
return image_info(load_addr);
|
|
}
|
|
|
|
for (arg = 1; arg < argc; ++arg) {
|
|
addr = simple_strtoul(argv[arg], NULL, 16);
|
|
if (image_info(addr) != 0)
|
|
rcode = 1;
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
static int image_info(ulong addr)
|
|
{
|
|
void *hdr = (void *)addr;
|
|
|
|
printf("\n## Checking Image at %08lx ...\n", addr);
|
|
|
|
switch (genimg_get_format(hdr)) {
|
|
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
|
|
case IMAGE_FORMAT_LEGACY:
|
|
puts(" Legacy image found\n");
|
|
if (!image_check_magic(hdr)) {
|
|
puts(" Bad Magic Number\n");
|
|
return 1;
|
|
}
|
|
|
|
if (!image_check_hcrc(hdr)) {
|
|
puts(" Bad Header Checksum\n");
|
|
return 1;
|
|
}
|
|
|
|
image_print_contents(hdr);
|
|
|
|
puts(" Verifying Checksum ... ");
|
|
if (!image_check_dcrc(hdr)) {
|
|
puts(" Bad Data CRC\n");
|
|
return 1;
|
|
}
|
|
puts("OK\n");
|
|
return 0;
|
|
#endif
|
|
#if defined(CONFIG_FIT)
|
|
case IMAGE_FORMAT_FIT:
|
|
puts(" FIT image found\n");
|
|
|
|
if (!fit_check_format(hdr)) {
|
|
puts("Bad FIT image format!\n");
|
|
return 1;
|
|
}
|
|
|
|
fit_print_contents(hdr);
|
|
|
|
if (!fit_all_image_verify(hdr)) {
|
|
puts("Bad hash in FIT image!\n");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
#endif
|
|
default:
|
|
puts("Unknown image format!\n");
|
|
break;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
iminfo, CONFIG_SYS_MAXARGS, 1, do_iminfo,
|
|
"print header information for application image",
|
|
"addr [addr ...]\n"
|
|
" - print header information for application image starting at\n"
|
|
" address 'addr' in memory; this includes verification of the\n"
|
|
" image contents (magic number, header and payload checksums)"
|
|
);
|
|
#endif
|
|
|
|
|
|
/*******************************************************************/
|
|
/* imls - list all images found in flash */
|
|
/*******************************************************************/
|
|
#if defined(CONFIG_CMD_IMLS)
|
|
static int do_imls_nor(void)
|
|
{
|
|
flash_info_t *info;
|
|
int i, j;
|
|
void *hdr;
|
|
|
|
for (i = 0, info = &flash_info[0];
|
|
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
goto next_bank;
|
|
for (j = 0; j < info->sector_count; ++j) {
|
|
|
|
hdr = (void *)info->start[j];
|
|
if (!hdr)
|
|
goto next_sector;
|
|
|
|
switch (genimg_get_format(hdr)) {
|
|
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
|
|
case IMAGE_FORMAT_LEGACY:
|
|
if (!image_check_hcrc(hdr))
|
|
goto next_sector;
|
|
|
|
printf("Legacy Image at %08lX:\n", (ulong)hdr);
|
|
image_print_contents(hdr);
|
|
|
|
puts(" Verifying Checksum ... ");
|
|
if (!image_check_dcrc(hdr)) {
|
|
puts("Bad Data CRC\n");
|
|
} else {
|
|
puts("OK\n");
|
|
}
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_FIT)
|
|
case IMAGE_FORMAT_FIT:
|
|
if (!fit_check_format(hdr))
|
|
goto next_sector;
|
|
|
|
printf("FIT Image at %08lX:\n", (ulong)hdr);
|
|
fit_print_contents(hdr);
|
|
break;
|
|
#endif
|
|
default:
|
|
goto next_sector;
|
|
}
|
|
|
|
next_sector: ;
|
|
}
|
|
next_bank: ;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_IMLS_NAND)
|
|
static int nand_imls_legacyimage(nand_info_t *nand, int nand_dev, loff_t off,
|
|
size_t len)
|
|
{
|
|
void *imgdata;
|
|
int ret;
|
|
|
|
imgdata = malloc(len);
|
|
if (!imgdata) {
|
|
printf("May be a Legacy Image at NAND device %d offset %08llX:\n",
|
|
nand_dev, off);
|
|
printf(" Low memory(cannot allocate memory for image)\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = nand_read_skip_bad(nand, off, &len,
|
|
imgdata);
|
|
if (ret < 0 && ret != -EUCLEAN) {
|
|
free(imgdata);
|
|
return ret;
|
|
}
|
|
|
|
if (!image_check_hcrc(imgdata)) {
|
|
free(imgdata);
|
|
return 0;
|
|
}
|
|
|
|
printf("Legacy Image at NAND device %d offset %08llX:\n",
|
|
nand_dev, off);
|
|
image_print_contents(imgdata);
|
|
|
|
puts(" Verifying Checksum ... ");
|
|
if (!image_check_dcrc(imgdata))
|
|
puts("Bad Data CRC\n");
|
|
else
|
|
puts("OK\n");
|
|
|
|
free(imgdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nand_imls_fitimage(nand_info_t *nand, int nand_dev, loff_t off,
|
|
size_t len)
|
|
{
|
|
void *imgdata;
|
|
int ret;
|
|
|
|
imgdata = malloc(len);
|
|
if (!imgdata) {
|
|
printf("May be a FIT Image at NAND device %d offset %08llX:\n",
|
|
nand_dev, off);
|
|
printf(" Low memory(cannot allocate memory for image)\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = nand_read_skip_bad(nand, off, &len,
|
|
imgdata);
|
|
if (ret < 0 && ret != -EUCLEAN) {
|
|
free(imgdata);
|
|
return ret;
|
|
}
|
|
|
|
if (!fit_check_format(imgdata)) {
|
|
free(imgdata);
|
|
return 0;
|
|
}
|
|
|
|
printf("FIT Image at NAND device %d offset %08llX:\n", nand_dev, off);
|
|
|
|
fit_print_contents(imgdata);
|
|
free(imgdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int do_imls_nand(void)
|
|
{
|
|
nand_info_t *nand;
|
|
int nand_dev = nand_curr_device;
|
|
size_t len;
|
|
loff_t off;
|
|
u32 buffer[16];
|
|
|
|
if (nand_dev < 0 || nand_dev >= CONFIG_SYS_MAX_NAND_DEVICE) {
|
|
puts("\nNo NAND devices available\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
printf("\n");
|
|
|
|
for (nand_dev = 0; nand_dev < CONFIG_SYS_MAX_NAND_DEVICE; nand_dev++) {
|
|
nand = &nand_info[nand_dev];
|
|
if (!nand->name || !nand->size)
|
|
continue;
|
|
|
|
for (off = 0; off < nand->size; off += nand->erasesize) {
|
|
const image_header_t *header;
|
|
int ret;
|
|
|
|
if (nand_block_isbad(nand, off))
|
|
continue;
|
|
|
|
len = sizeof(buffer);
|
|
|
|
ret = nand_read(nand, off, &len, (u8 *)buffer);
|
|
if (ret < 0 && ret != -EUCLEAN) {
|
|
printf("NAND read error %d at offset %08llX\n",
|
|
ret, off);
|
|
continue;
|
|
}
|
|
|
|
switch (genimg_get_format(buffer)) {
|
|
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
|
|
case IMAGE_FORMAT_LEGACY:
|
|
header = (const image_header_t *)buffer;
|
|
|
|
len = image_get_image_size(header);
|
|
nand_imls_legacyimage(nand, nand_dev, off, len);
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_FIT)
|
|
case IMAGE_FORMAT_FIT:
|
|
len = fit_get_size(buffer);
|
|
nand_imls_fitimage(nand, nand_dev, off, len);
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_IMLS) || defined(CONFIG_CMD_IMLS_NAND)
|
|
static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int ret_nor = 0, ret_nand = 0;
|
|
|
|
#if defined(CONFIG_CMD_IMLS)
|
|
ret_nor = do_imls_nor();
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_IMLS_NAND)
|
|
ret_nand = do_imls_nand();
|
|
#endif
|
|
|
|
if (ret_nor)
|
|
return ret_nor;
|
|
|
|
if (ret_nand)
|
|
return ret_nand;
|
|
|
|
return (0);
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
imls, 1, 1, do_imls,
|
|
"list all images found in flash",
|
|
"\n"
|
|
" - Prints information about all images found at sector/block\n"
|
|
" boundaries in nor/nand flash."
|
|
);
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_BOOTZ
|
|
|
|
int __weak bootz_setup(ulong image, ulong *start, ulong *end)
|
|
{
|
|
/* Please define bootz_setup() for your platform */
|
|
|
|
puts("Your platform's zImage format isn't supported yet!\n");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* zImage booting support
|
|
*/
|
|
static int bootz_start(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[], bootm_headers_t *images)
|
|
{
|
|
int ret;
|
|
ulong zi_start, zi_end;
|
|
|
|
ret = do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START,
|
|
images, 1);
|
|
|
|
/* Setup Linux kernel zImage entry point */
|
|
if (!argc) {
|
|
images->ep = load_addr;
|
|
debug("* kernel: default image load address = 0x%08lx\n",
|
|
load_addr);
|
|
} else {
|
|
images->ep = simple_strtoul(argv[0], NULL, 16);
|
|
debug("* kernel: cmdline image address = 0x%08lx\n",
|
|
images->ep);
|
|
}
|
|
|
|
ret = bootz_setup(images->ep, &zi_start, &zi_end);
|
|
if (ret != 0)
|
|
return 1;
|
|
|
|
lmb_reserve(&images->lmb, images->ep, zi_end - zi_start);
|
|
|
|
/*
|
|
* Handle the BOOTM_STATE_FINDOTHER state ourselves as we do not
|
|
* have a header that provide this informaiton.
|
|
*/
|
|
if (bootm_find_images(flag, argc, argv))
|
|
return 1;
|
|
|
|
#ifdef CONFIG_SECURE_BOOT
|
|
extern uint32_t authenticate_image(
|
|
uint32_t ddr_start, uint32_t image_size);
|
|
if (authenticate_image(images->ep, zi_end - zi_start) == 0) {
|
|
printf("Authenticate zImage Fail, Please check\n");
|
|
return 1;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int ret;
|
|
|
|
/* Consume 'bootz' */
|
|
argc--; argv++;
|
|
|
|
if (bootz_start(cmdtp, flag, argc, argv, &images))
|
|
return 1;
|
|
|
|
/*
|
|
* We are doing the BOOTM_STATE_LOADOS state ourselves, so must
|
|
* disable interrupts ourselves
|
|
*/
|
|
bootm_disable_interrupts();
|
|
|
|
images.os.os = IH_OS_LINUX;
|
|
ret = do_bootm_states(cmdtp, flag, argc, argv,
|
|
BOOTM_STATE_OS_PREP | BOOTM_STATE_OS_FAKE_GO |
|
|
BOOTM_STATE_OS_GO,
|
|
&images, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
static char bootz_help_text[] =
|
|
"[addr [initrd[:size]] [fdt]]\n"
|
|
" - boot Linux zImage stored in memory\n"
|
|
"\tThe argument 'initrd' is optional and specifies the address\n"
|
|
"\tof the initrd in memory. The optional argument ':size' allows\n"
|
|
"\tspecifying the size of RAW initrd.\n"
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
"\tWhen booting a Linux kernel which requires a flat device-tree\n"
|
|
"\ta third argument is required which is the address of the\n"
|
|
"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
|
|
"\tuse a '-' for the second argument. If you do not pass a third\n"
|
|
"\ta bd_info struct will be passed instead\n"
|
|
#endif
|
|
"";
|
|
#endif
|
|
|
|
U_BOOT_CMD(
|
|
bootz, CONFIG_SYS_MAXARGS, 1, do_bootz,
|
|
"boot Linux zImage image from memory", bootz_help_text
|
|
);
|
|
#endif /* CONFIG_CMD_BOOTZ */
|
|
|
|
#ifdef CONFIG_CMD_BOOTI
|
|
/* See Documentation/arm64/booting.txt in the Linux kernel */
|
|
struct Image_header {
|
|
uint32_t code0; /* Executable code */
|
|
uint32_t code1; /* Executable code */
|
|
uint64_t text_offset; /* Image load offset, LE */
|
|
uint64_t image_size; /* Effective Image size, LE */
|
|
uint64_t res1; /* reserved */
|
|
uint64_t res2; /* reserved */
|
|
uint64_t res3; /* reserved */
|
|
uint64_t res4; /* reserved */
|
|
uint32_t magic; /* Magic number */
|
|
uint32_t res5;
|
|
};
|
|
|
|
#define LINUX_ARM64_IMAGE_MAGIC 0x644d5241
|
|
|
|
static int booti_setup(bootm_headers_t *images)
|
|
{
|
|
struct Image_header *ih;
|
|
uint64_t dst;
|
|
|
|
ih = (struct Image_header *)map_sysmem(images->ep, 0);
|
|
|
|
if (ih->magic != le32_to_cpu(LINUX_ARM64_IMAGE_MAGIC)) {
|
|
puts("Bad Linux ARM64 Image magic!\n");
|
|
return 1;
|
|
}
|
|
|
|
if (ih->image_size == 0) {
|
|
puts("Image lacks image_size field, assuming 16MiB\n");
|
|
ih->image_size = (16 << 20);
|
|
}
|
|
|
|
/*
|
|
* If we are not at the correct run-time location, set the new
|
|
* correct location and then move the image there.
|
|
*/
|
|
dst = gd->bd->bi_dram[0].start + le32_to_cpu(ih->text_offset);
|
|
if (images->ep != dst) {
|
|
void *src;
|
|
|
|
debug("Moving Image from 0x%lx to 0x%llx\n", images->ep, dst);
|
|
|
|
src = (void *)images->ep;
|
|
images->ep = dst;
|
|
memmove((void *)dst, src, le32_to_cpu(ih->image_size));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Image booting support
|
|
*/
|
|
static int booti_start(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[], bootm_headers_t *images)
|
|
{
|
|
int ret;
|
|
struct Image_header *ih;
|
|
|
|
ret = do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START,
|
|
images, 1);
|
|
|
|
/* Setup Linux kernel Image entry point */
|
|
if (!argc) {
|
|
images->ep = load_addr;
|
|
debug("* kernel: default image load address = 0x%08lx\n",
|
|
load_addr);
|
|
} else {
|
|
images->ep = simple_strtoul(argv[0], NULL, 16);
|
|
debug("* kernel: cmdline image address = 0x%08lx\n",
|
|
images->ep);
|
|
}
|
|
|
|
ret = booti_setup(images);
|
|
if (ret != 0)
|
|
return 1;
|
|
|
|
ih = (struct Image_header *)map_sysmem(images->ep, 0);
|
|
|
|
lmb_reserve(&images->lmb, images->ep, le32_to_cpu(ih->image_size));
|
|
|
|
/*
|
|
* Handle the BOOTM_STATE_FINDOTHER state ourselves as we do not
|
|
* have a header that provide this informaiton.
|
|
*/
|
|
if (bootm_find_images(flag, argc, argv))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int do_booti(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int ret;
|
|
|
|
/* Consume 'booti' */
|
|
argc--; argv++;
|
|
|
|
if (booti_start(cmdtp, flag, argc, argv, &images))
|
|
return 1;
|
|
|
|
/*
|
|
* We are doing the BOOTM_STATE_LOADOS state ourselves, so must
|
|
* disable interrupts ourselves
|
|
*/
|
|
bootm_disable_interrupts();
|
|
|
|
images.os.os = IH_OS_LINUX;
|
|
ret = do_bootm_states(cmdtp, flag, argc, argv,
|
|
BOOTM_STATE_OS_PREP | BOOTM_STATE_OS_FAKE_GO |
|
|
BOOTM_STATE_OS_GO,
|
|
&images, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
static char booti_help_text[] =
|
|
"[addr [initrd[:size]] [fdt]]\n"
|
|
" - boot arm64 Linux Image stored in memory\n"
|
|
"\tThe argument 'initrd' is optional and specifies the address\n"
|
|
"\tof an initrd in memory. The optional parameter ':size' allows\n"
|
|
"\tspecifying the size of a RAW initrd.\n"
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
"\tSince booting a Linux kernel requires a flat device-tree, a\n"
|
|
"\tthird argument providing the address of the device-tree blob\n"
|
|
"\tis required. To boot a kernel with a device-tree blob but\n"
|
|
"\twithout an initrd image, use a '-' for the initrd argument.\n"
|
|
#endif
|
|
"";
|
|
#endif
|
|
|
|
U_BOOT_CMD(
|
|
booti, CONFIG_SYS_MAXARGS, 1, do_booti,
|
|
"boot arm64 Linux Image image from memory", booti_help_text
|
|
);
|
|
#endif /* CONFIG_CMD_BOOTI */
|