ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12
Synchronize DH DHCOR DTs with Linux commit 25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The eeprom0 alias is
now reinstated in SoM u-boot dtsi, the PHY reset GPIO is reinstated in AV96
u-boot dtsi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
This commit is contained in:
Marek Vasut
committed by
Patrice Chotard
Patrice Chotard
parent
bd485f9bcc
commit
6b8bd70904
@ -1107,7 +1107,6 @@ dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
|
||||
|
||||
dtb-$(CONFIG_STM32MP15x) += \
|
||||
stm32mp157a-dk1.dtb \
|
||||
stm32mp157a-avenger96.dtb \
|
||||
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
|
||||
stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
|
||||
stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
|
||||
|
||||
@ -1,8 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
*/
|
||||
|
||||
/* This is kept for backward compatibility and will be removed */
|
||||
#include "stm32mp15xx-dhcor-avenger96.dts"
|
||||
38
arch/arm/dts/stm32mp157a-dhcor-avenger96.dts
Normal file
38
arch/arm/dts/stm32mp157a-dhcor-avenger96.dts
Normal file
@ -0,0 +1,38 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* DHCOR STM32MP1 variant:
|
||||
* DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
|
||||
* DHCOR PCB number: 586-100 or newer
|
||||
* Avenger96 PCB number: 588-200 or newer
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15xx-dhcor-som.dtsi"
|
||||
#include "stm32mp15xx-dhcor-avenger96.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Arrow Electronics STM32MP157A Avenger96 board";
|
||||
compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
|
||||
"st,stm32mp157";
|
||||
};
|
||||
|
||||
&m_can1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&m_can1_pins_b>;
|
||||
pinctrl-1 = <&m_can1_sleep_pins_b>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&m_can2 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&m_can2_pins_a>;
|
||||
pinctrl-1 = <&m_can2_sleep_pins_a>;
|
||||
status = "disabled";
|
||||
};
|
||||
@ -21,6 +21,8 @@
|
||||
|
||||
|
||||
ðernet0 {
|
||||
phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
|
||||
|
||||
mdio0 {
|
||||
ethernet-phy@7 {
|
||||
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
|
||||
|
||||
@ -7,206 +7,12 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp15xx-dhcor-io1v8.dtsi"
|
||||
#include "stm32mp15xx-dhcor-avenger96-u-boot.dtsi"
|
||||
#include "stm32mp151.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15xx-dhcor-som.dtsi"
|
||||
#include "stm32mp15xx-dhcor-avenger96.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Arrow Electronics STM32MP15xx Avenger96 board";
|
||||
compatible = "arrow,stm32mp15xx-avenger96", "st,stm32mp15x";
|
||||
|
||||
aliases {
|
||||
eeprom0 = &eeprom0;
|
||||
ethernet0 = ðernet0;
|
||||
mmc0 = &sdmmc1;
|
||||
serial0 = &uart4;
|
||||
serial1 = &uart7;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
led1 {
|
||||
label = "green:user0";
|
||||
gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "green:user1";
|
||||
gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "green:user2";
|
||||
gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc1";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led4 {
|
||||
label = "green:user3";
|
||||
gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led5 {
|
||||
label = "yellow:wifi";
|
||||
gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0tx";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led6 {
|
||||
label = "blue:bt";
|
||||
gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "bluetooth-power";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
sd_switch: regulator-sd_switch {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "sd_switch";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-type = "voltage";
|
||||
regulator-always-on;
|
||||
|
||||
gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
states = <1800000 0x1>,
|
||||
<2900000 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_c>;
|
||||
pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy0: ethernet-phy@7 {
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 { /* X6 I2C1 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_b>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2c2 { /* X6 I2C2 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins_c>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
eeprom0: eeprom@53 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x53>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
|
||||
disable-wp;
|
||||
st,sig-dir;
|
||||
st,neg-edge;
|
||||
st,use-ckin;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&vdd_sd>;
|
||||
vqmmc-supply = <&sd_switch>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
st,neg-edge;
|
||||
bus-width = <8>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
mmc-ddr-3_3v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
/* On Low speed expansion header */
|
||||
label = "LS-UART1";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
/* On Low speed expansion header */
|
||||
label = "LS-UART0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
phy-names = "usb";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
pinctrl-0 = <&usbotg_hs_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
431
arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtsi
Normal file
431
arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtsi
Normal file
@ -0,0 +1,431 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
|
||||
/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */
|
||||
#include "stm32mp15xx-dhcor-io1v8.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = ðernet0;
|
||||
mmc0 = &sdmmc1;
|
||||
serial0 = &uart4;
|
||||
serial1 = &uart7;
|
||||
serial2 = &usart2;
|
||||
spi0 = &qspi;
|
||||
};
|
||||
|
||||
/* XTal Q1 */
|
||||
cec_clock: clk-cec-fixed {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con: endpoint {
|
||||
remote-endpoint = <&adv7513_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
led1 {
|
||||
label = "green:user0";
|
||||
gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "green:user1";
|
||||
gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "green:user2";
|
||||
gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc1";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led4 {
|
||||
label = "green:user3";
|
||||
gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
sd_switch: regulator-sd_switch {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "sd_switch";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-type = "voltage";
|
||||
regulator-always-on;
|
||||
|
||||
gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
states = <1800000 0x1>,
|
||||
<2900000 0x0>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "STM32MP1-AV96-HDMI";
|
||||
dais = <&sai2a_port>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wlan_pwr: regulator-wlan {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "wl-reg";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&adc12_ain_pins_b>;
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdda>;
|
||||
vref-supply = <&vdda>;
|
||||
status = "okay";
|
||||
|
||||
adc1: adc@0 {
|
||||
st,adc-channels = <0 1 6>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc2: adc@100 {
|
||||
st,adc-channels = <0 1 2>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_c>;
|
||||
pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <1000>;
|
||||
|
||||
phy0: ethernet-phy@7 {
|
||||
reg = <7>;
|
||||
|
||||
rxc-skew-ps = <1500>;
|
||||
rxdv-skew-ps = <540>;
|
||||
rxd0-skew-ps = <420>;
|
||||
rxd1-skew-ps = <420>;
|
||||
rxd2-skew-ps = <420>;
|
||||
rxd3-skew-ps = <420>;
|
||||
|
||||
txc-skew-ps = <1440>;
|
||||
txen-skew-ps = <540>;
|
||||
txd0-skew-ps = <420>;
|
||||
txd1-skew-ps = <420>;
|
||||
txd2-skew-ps = <420>;
|
||||
txd3-skew-ps = <420>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpioa {
|
||||
gpio-line-names = "", "", "", "",
|
||||
"", "", "", "",
|
||||
"", "", "", "AV96-K",
|
||||
"AV96-I", "", "AV96-A", "";
|
||||
};
|
||||
|
||||
&gpiob {
|
||||
gpio-line-names = "", "", "", "",
|
||||
"", "AV96-J", "", "",
|
||||
"", "", "", "AV96-B",
|
||||
"", "AV96-L", "", "";
|
||||
};
|
||||
|
||||
&gpioc {
|
||||
gpio-line-names = "", "", "", "AV96-C",
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpiod {
|
||||
gpio-line-names = "", "", "", "",
|
||||
"", "", "", "",
|
||||
"AV96-D", "", "", "",
|
||||
"", "", "AV96-E", "AV96-F";
|
||||
};
|
||||
|
||||
&gpiof {
|
||||
gpio-line-names = "", "", "", "",
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
"AV96-G", "AV96-H", "", "";
|
||||
};
|
||||
|
||||
&i2c1 { /* X6 I2C1 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_b>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2c2 { /* X6 I2C2 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins_c>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
hdmi-transmitter@3d {
|
||||
compatible = "adi,adv7513";
|
||||
reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
|
||||
reg-names = "main", "edid", "cec", "packet";
|
||||
clocks = <&cec_clock>;
|
||||
clock-names = "cec";
|
||||
|
||||
avdd-supply = <&v3v3>;
|
||||
dvdd-supply = <&v3v3>;
|
||||
pvdd-supply = <&v3v3>;
|
||||
dvdd-3v-supply = <&v3v3>;
|
||||
bgvdd-supply = <&v3v3>;
|
||||
|
||||
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpiog>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7513_in: endpoint {
|
||||
remote-endpoint = <<dc_ep0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7513_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
adv7513_i2s0: endpoint {
|
||||
remote-endpoint = <&sai2a_endpoint>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
<dc {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <<dc_pins_d>;
|
||||
pinctrl-1 = <<dc_sleep_pins_d>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ltdc_ep0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&adv7513_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sai2a_pins_c>;
|
||||
pinctrl-1 = <&sai2a_sleep_pins_c>;
|
||||
clock-names = "pclk", "x8k", "x11k";
|
||||
status = "okay";
|
||||
|
||||
sai2a: audio-controller@4400b004 {
|
||||
#clock-cells = <0>;
|
||||
dma-names = "tx";
|
||||
clocks = <&rcc SAI2_K>;
|
||||
clock-names = "sai_ck";
|
||||
status = "okay";
|
||||
|
||||
sai2a_port: port {
|
||||
sai2a_endpoint: endpoint {
|
||||
remote-endpoint = <&adv7513_i2s0>;
|
||||
format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
|
||||
cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
||||
disable-wp;
|
||||
st,sig-dir;
|
||||
st,neg-edge;
|
||||
st,use-ckin;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&vdd_sd>;
|
||||
vqmmc-supply = <&sd_switch>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
|
||||
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
|
||||
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
|
||||
bus-width = <8>;
|
||||
mmc-ddr-1_8v;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
st,neg-edge;
|
||||
vmmc-supply = <&v3v3>;
|
||||
vqmmc-supply = <&vdd_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc3 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc3_b4_pins_b>;
|
||||
pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
|
||||
pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
|
||||
broken-cd;
|
||||
non-removable;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&wlan_pwr>;
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
brcmf: bcrmf@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_pins_a>;
|
||||
cs-gpios = <&gpioi 0 0>;
|
||||
status = "disabled";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
/* On Low speed expansion header */
|
||||
label = "LS-UART1";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
/* On Low speed expansion header */
|
||||
label = "LS-UART0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7_pins_a>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Bluetooth */
|
||||
&usart2 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&usart2_pins_a>;
|
||||
pinctrl-1 = <&usart2_sleep_pins_a>;
|
||||
st,hw-flow-ctrl;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
max-speed = <3000000>;
|
||||
shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
phy-names = "usb";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
pinctrl-0 = <&usbotg_hs_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
phy-names = "usb2-phy";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
status = "okay";
|
||||
vbus-supply = <&vbus_otg>;
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
@ -1,12 +1,12 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
|
||||
#include "stm32mp15xx-dhcor-io3v3.dtsi"
|
||||
|
||||
/ {
|
||||
/* Enpirion EP3A8LQI U2 on the 1V8 IO DHCOR */
|
||||
/* Enpirion EP3A8LQI U2 on the DHCOR */
|
||||
vdd_io: regulator-buck-io {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "buck-io";
|
||||
@ -20,5 +20,4 @@
|
||||
|
||||
&pwr_regulators {
|
||||
vdd-supply = <&vdd_io>;
|
||||
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
@ -4,9 +4,7 @@
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxac-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
@ -23,6 +21,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
&crc1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dts {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
@ -35,7 +41,7 @@
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
@ -53,7 +59,7 @@
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
@ -92,7 +98,6 @@
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
v2v8: ldo2 {
|
||||
@ -100,7 +105,6 @@
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
@ -114,7 +118,6 @@
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
vdd_sd: ldo5 {
|
||||
@ -122,7 +125,6 @@
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
@ -131,7 +133,6 @@
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-enable-ramp-delay = <300000>;
|
||||
};
|
||||
|
||||
@ -143,20 +144,17 @@
|
||||
bst_out: boost {
|
||||
regulator-name = "bst_out";
|
||||
interrupts = <IT_OCP_BOOST 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
|
||||
vbus_sw: pwr_sw2 {
|
||||
regulator-name = "vbus_sw";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
};
|
||||
@ -173,6 +171,12 @@
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@53 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x53>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
@ -194,7 +198,7 @@
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash0: spi-flash@0 {
|
||||
flash0: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-rx-bus-width = <4>;
|
||||
@ -15,6 +15,11 @@
|
||||
|
||||
/ {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
aliases {
|
||||
eeprom0 = &eeprom0;
|
||||
};
|
||||
|
||||
config {
|
||||
dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>;
|
||||
dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>;
|
||||
@ -28,6 +33,9 @@
|
||||
&i2c4 {
|
||||
u-boot,dm-pre-reloc;
|
||||
u-boot,dm-spl;
|
||||
|
||||
eeprom0: eeprom@53 {
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4_pins_a {
|
||||
|
||||
Reference in New Issue
Block a user