Linux 2.6.16.1

Fix bug identified by Linus Torvalds <torvalds@osdl.org>: the `out'
instruction depends upon the state of memory_data[], so we need to tell gcc
that before executing it. (The opcode, not gcc).

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5553

Thanks to Antonio Ospite <ospite@studenti.unina.it> for testing.

Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =
+EXTRAVERSION = .1
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*

arch/i386/kernel/cpu/cpufreq/speedstep-smi.c

@@ -75,7 +75,9 @@ static int speedstep_smi_ownership (void)
 	__asm__ __volatile__(
 		"out %%al, (%%dx)\n"
 		: "=D" (result)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
+			"D" (0), "S" (magic)
+		: "memory"
 	);
 
 	dprintk("result is %x\n", result);

arch/i386/kernel/dmi_scan.c

@@ -106,7 +106,7 @@ static void __init dmi_save_devices(struct dmi_header *dm)
 	struct dmi_device *dev;
 
 	for (i = 0; i < count; i++) {
-		char *d = ((char *) dm) + (i * 2);
+		char *d = (char *)(dm + 1) + (i * 2);
 
 		/* Skip disabled device */
 		if ((*d & 0x80) == 0)

drivers/base/cpu.c

@@ -141,7 +141,7 @@ int __devinit register_cpu(struct cpu *cpu, int num, struct node *root)
 	return error;
 }
 
-struct sys_device *get_cpu_sysdev(int cpu)
+struct sys_device *get_cpu_sysdev(unsigned cpu)
 {
 	if (cpu < NR_CPUS)
 		return cpu_sys_devices[cpu];

drivers/base/firmware_class.c

@@ -211,18 +211,20 @@ static int
 fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
 {
 	u8 *new_data;
+	int new_size = fw_priv->alloc_size;
 
 	if (min_size <= fw_priv->alloc_size)
 		return 0;
 
-	new_data = vmalloc(fw_priv->alloc_size + PAGE_SIZE);
+	new_size = ALIGN(min_size, PAGE_SIZE);
+	new_data = vmalloc(new_size);
 	if (!new_data) {
 		printk(KERN_ERR "%s: unable to alloc buffer\n", __FUNCTION__);
 		/* Make sure that we don't keep incomplete data */
 		fw_load_abort(fw_priv);
 		return -ENOMEM;
 	}
-	fw_priv->alloc_size += PAGE_SIZE;
+	fw_priv->alloc_size = new_size;
 	if (fw_priv->fw->data) {
 		memcpy(new_data, fw_priv->fw->data, fw_priv->fw->size);
 		vfree(fw_priv->fw->data);

drivers/block/cciss.c

@@ -3269,8 +3269,8 @@ clean2:
 	unregister_blkdev(hba[i]->major, hba[i]->devname);
 clean1:
 	release_io_mem(hba[i]);
-	free_hba(i);
 	hba[i]->busy_initializing = 0;
+	free_hba(i);
 	return(-1);
 }
 

drivers/md/dm.c

@@ -533,30 +533,35 @@ static void __clone_and_map(struct clone_info *ci)
 
 	} else {
 		/*
-		 * Create two copy bios to deal with io that has
-		 * been split across a target.
+		 * Handle a bvec that must be split between two or more targets.
 		 */
 		struct bio_vec *bv = bio->bi_io_vec + ci->idx;
+		sector_t remaining = to_sector(bv->bv_len);
+		unsigned int offset = 0;
 
-		clone = split_bvec(bio, ci->sector, ci->idx,
-				   bv->bv_offset, max);
-		__map_bio(ti, clone, tio);
+		do {
+			if (offset) {
+				ti = dm_table_find_target(ci->map, ci->sector);
+				max = max_io_len(ci->md, ci->sector, ti);
 
-		ci->sector += max;
-		ci->sector_count -= max;
-		ti = dm_table_find_target(ci->map, ci->sector);
+				tio = alloc_tio(ci->md);
+				tio->io = ci->io;
+				tio->ti = ti;
+				memset(&tio->info, 0, sizeof(tio->info));
+			}
 
-		len = to_sector(bv->bv_len) - max;
-		clone = split_bvec(bio, ci->sector, ci->idx,
-				   bv->bv_offset + to_bytes(max), len);
-		tio = alloc_tio(ci->md);
-		tio->io = ci->io;
-		tio->ti = ti;
-		memset(&tio->info, 0, sizeof(tio->info));
-		__map_bio(ti, clone, tio);
+			len = min(remaining, max);
+
+			clone = split_bvec(bio, ci->sector, ci->idx,
+					   bv->bv_offset + offset, len);
+
+			__map_bio(ti, clone, tio);
+
+			ci->sector += len;
+			ci->sector_count -= len;
+			offset += to_bytes(len);
+		} while (remaining -= len);
 
-		ci->sector += len;
-		ci->sector_count -= len;
 		ci->idx++;
 	}
 }

drivers/media/video/Kconfig

@@ -349,6 +349,7 @@ config VIDEO_AUDIO_DECODER
 config VIDEO_DECODER
 	tristate "Add support for additional video chipsets"
 	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	select FW_LOADER
 	---help---
 	  Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
 	  video decoders.

drivers/media/video/tuner-types.c

@@ -1087,8 +1087,8 @@ static struct tuner_params tuner_tnf_5335mf_params[] = {
 /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
 
 static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
-	{ 16 * 175.75 /*MHz*/, 0x01, },
-	{ 16 * 410.25 /*MHz*/, 0x02, },
+	{ 16 * 130.00 /*MHz*/, 0x01, },
+	{ 16 * 364.50 /*MHz*/, 0x02, },
 	{ 16 * 999.99        , 0x08, },
 };
 

drivers/scsi/sata_mv.c

@@ -1102,6 +1102,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
 	u32 out_ptr;
+	u8 ata_status;
 
 	out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
@@ -1109,6 +1110,8 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 	assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
 	       pp->rsp_consumer);
 
+	ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+
 	/* increment our consumer index... */
 	pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
 
@@ -1123,7 +1126,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 	writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
 	/* Return ATA status register for completed CRPB */
-	return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
+	return ata_status;
 }
 
 /**
@@ -1192,7 +1195,6 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 	u32 hc_irq_cause;
 	int shift, port, port0, hard_port, handled;
 	unsigned int err_mask;
-	u8 ata_status = 0;
 
 	if (hc == 0) {
 		port0 = 0;
@@ -1210,6 +1212,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 		hc,relevant,hc_irq_cause);
 
 	for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
+		u8 ata_status = 0;
 		ap = host_set->ports[port];
 		hard_port = port & MV_PORT_MASK;	/* range 0-3 */
 		handled = 0;	/* ensure ata_status is set if handled++ */

drivers/video/i810/i810_main.c

@@ -1508,7 +1508,7 @@ static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 		int size = ((cursor->image.width + 7) >> 3) *
 			cursor->image.height;
 		int i;
-		u8 *data = kmalloc(64 * 8, GFP_KERNEL);
+		u8 *data = kmalloc(64 * 8, GFP_ATOMIC);
 
 		if (data == NULL)
 			return -ENOMEM;

fs/9p/vfs_inode.c

@@ -614,6 +614,7 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
 
 	sb = dir->i_sb;
 	v9ses = v9fs_inode2v9ses(dir);
+	dentry->d_op = &v9fs_dentry_operations;
 	dirfid = v9fs_fid_lookup(dentry->d_parent);
 
 	if (!dirfid) {
@@ -681,8 +682,6 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
 		goto FreeFcall;
 
 	fid->qid = fcall->params.rstat.stat.qid;
-
-	dentry->d_op = &v9fs_dentry_operations;
 	v9fs_stat2inode(&fcall->params.rstat.stat, inode, inode->i_sb);
 
 	d_add(dentry, inode);

fs/proc/proc_misc.c

@@ -312,7 +312,7 @@ static void *devinfo_next(struct seq_file *f, void *v, loff_t *pos)
 		case BLK_HDR:
 			info->state = BLK_LIST;
 			(*pos)++;
-			break;
+			/*fallthrough*/
 		case BLK_LIST:
 			if (get_blkdev_info(info->blkdev,&idummy,&ndummy)) {
 				/*

fs/sysfs/dir.c

@@ -302,6 +302,7 @@ void sysfs_remove_dir(struct kobject * kobj)
 	 * Drop reference from dget() on entrance.
 	 */
 	dput(dentry);
+	kobj->dentry = NULL;
 }
 
 int sysfs_rename_dir(struct kobject * kobj, const char *new_name)

fs/sysfs/inode.c

@@ -227,12 +227,16 @@ void sysfs_drop_dentry(struct sysfs_dirent * sd, struct dentry * parent)
 void sysfs_hash_and_remove(struct dentry * dir, const char * name)
 {
 	struct sysfs_dirent * sd;
-	struct sysfs_dirent * parent_sd = dir->d_fsdata;
+	struct sysfs_dirent * parent_sd;
+
+	if (!dir)
+		return;
 
 	if (dir->d_inode == NULL)
 		/* no inode means this hasn't been made visible yet */
 		return;
 
+	parent_sd = dir->d_fsdata;
 	mutex_lock(&dir->d_inode->i_mutex);
 	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
 		if (!sd->s_element)

fs/sysfs/symlink.c

@@ -66,6 +66,7 @@ static int sysfs_add_link(struct dentry * parent, const char * name, struct kobj
 	if (!error)
 		return 0;
 
+	kobject_put(target);
 	kfree(sl->link_name);
 exit2:
 	kfree(sl);

fs/xfs/linux-2.6/xfs_aops.c

@@ -616,7 +616,7 @@ xfs_is_delayed_page(
 				acceptable = (type == IOMAP_UNWRITTEN);
 			else if (buffer_delay(bh))
 				acceptable = (type == IOMAP_DELAY);
-			else if (buffer_mapped(bh))
+			else if (buffer_dirty(bh) && buffer_mapped(bh))
 				acceptable = (type == 0);
 			else
 				break;

include/linux/cpu.h

@@ -32,7 +32,7 @@ struct cpu {
 };
 
 extern int register_cpu(struct cpu *, int, struct node *);
-extern struct sys_device *get_cpu_sysdev(int cpu);
+extern struct sys_device *get_cpu_sysdev(unsigned cpu);
 #ifdef CONFIG_HOTPLUG_CPU
 extern void unregister_cpu(struct cpu *, struct node *);
 #endif

include/linux/raid/raid1.h

@@ -130,6 +130,6 @@ struct r1bio_s {
  * with failure when last write completes (and all failed).
  * Record that bi_end_io was called with this flag...
  */
-#define	R1BIO_Returned 4
+#define	R1BIO_Returned 6
 
 #endif

include/linux/rtc.h

@@ -11,8 +11,6 @@
 #ifndef _LINUX_RTC_H_
 #define _LINUX_RTC_H_
 
-#include <linux/interrupt.h>
-
 /*
  * The struct used to pass data via the following ioctl. Similar to the
  * struct tm in <time.h>, but it needs to be here so that the kernel 
@@ -95,6 +93,8 @@ struct rtc_pll_info {
 
 #ifdef __KERNEL__
 
+#include <linux/interrupt.h>
+
 typedef struct rtc_task {
 	void (*func)(void *private_data);
 	void *private_data;

kernel/sched.c

@@ -237,6 +237,7 @@ struct runqueue {
 
 	task_t *migration_thread;
 	struct list_head migration_queue;
+	int cpu;
 #endif
 
 #ifdef CONFIG_SCHEDSTATS
@@ -1660,6 +1661,9 @@ unsigned long nr_iowait(void)
 /*
  * double_rq_lock - safely lock two runqueues
  *
+ * We must take them in cpu order to match code in
+ * dependent_sleeper and wake_dependent_sleeper.
+ *
  * Note this does not disable interrupts like task_rq_lock,
  * you need to do so manually before calling.
  */
@@ -1671,7 +1675,7 @@ static void double_rq_lock(runqueue_t *rq1, runqueue_t *rq2)
 		spin_lock(&rq1->lock);
 		__acquire(rq2->lock);	/* Fake it out ;) */
 	} else {
-		if (rq1 < rq2) {
+		if (rq1->cpu < rq2->cpu) {
 			spin_lock(&rq1->lock);
 			spin_lock(&rq2->lock);
 		} else {
@@ -1707,7 +1711,7 @@ static void double_lock_balance(runqueue_t *this_rq, runqueue_t *busiest)
 	__acquires(this_rq->lock)
 {
 	if (unlikely(!spin_trylock(&busiest->lock))) {
-		if (busiest < this_rq) {
+		if (busiest->cpu < this_rq->cpu) {
 			spin_unlock(&this_rq->lock);
 			spin_lock(&busiest->lock);
 			spin_lock(&this_rq->lock);
@@ -6035,6 +6039,7 @@ void __init sched_init(void)
 		rq->push_cpu = 0;
 		rq->migration_thread = NULL;
 		INIT_LIST_HEAD(&rq->migration_queue);
+		rq->cpu = i;
 #endif
 		atomic_set(&rq->nr_iowait, 0);
 

net/core/sock.c

@@ -404,8 +404,9 @@ set_rcvbuf:
 			if (!valbool) {
 				sk->sk_bound_dev_if = 0;
 			} else {
-				if (optlen > IFNAMSIZ) 
-					optlen = IFNAMSIZ; 
+				if (optlen > IFNAMSIZ - 1)
+					optlen = IFNAMSIZ - 1;
+				memset(devname, 0, sizeof(devname));
 				if (copy_from_user(devname, optval, optlen)) {
 					ret = -EFAULT;
 					break;

net/ipv4/ip_output.c

@@ -1249,11 +1249,7 @@ int ip_push_pending_frames(struct sock *sk)
 	iph->tos = inet->tos;
 	iph->tot_len = htons(skb->len);
 	iph->frag_off = df;
-	if (!df) {
-		__ip_select_ident(iph, &rt->u.dst, 0);
-	} else {
-		iph->id = htons(inet->id++);
-	}
+	ip_select_ident(iph, &rt->u.dst, sk);
 	iph->ttl = ttl;
 	iph->protocol = sk->sk_protocol;
 	iph->saddr = rt->rt_src;