Linux 3.2.69

This reverts commit 823f14022f, which was
commit 2dca485f87 upstream.  It
depends on functionality that is not present in 3.2.y.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>

Documentation/filesystems/proc.txt

@@ -1293,8 +1293,8 @@ may allocate from based on an estimation of its current memory and swap use.
 For example, if a task is using all allowed memory, its badness score will be
 1000.  If it is using half of its allowed memory, its score will be 500.
 
-There is an additional factor included in the badness score: root
-processes are given 3% extra memory over other tasks.
+There is an additional factor included in the badness score: the current memory
+and swap usage is discounted by 3% for root processes.
 
 The amount of "allowed" memory depends on the context in which the oom killer
 was called.  If it is due to the memory assigned to the allocating task's cpuset

Documentation/i2c/busses/i2c-piix4

@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD Hudson-2, CZ
+  * AMD Hudson-2, ML, CZ
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com

Documentation/input/elantech.txt

@@ -504,9 +504,12 @@ byte 5:
 * reg_10
 
    bit   7   6   5   4   3   2   1   0
-         0   0   0   0   0   0   0   A
+         0   0   0   0   R   F   T   A
 
          A: 1 = enable absolute tracking
+         T: 1 = enable two finger mode auto correct
+         F: 1 = disable ABS Position Filter
+         R: 1 = enable real hardware resolution
 
 6.2 Native absolute mode 6 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/ja_JP/HOWTO

@@ -315,7 +315,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
 もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が
 最新の安定版カーネルです。
 
-2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+2.6.x.y は "stable" チーム <stable@vger.kernel.org> でメンテされており、必
 要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
 た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
 の場合はこれに対してだいたいの場合、すぐにリリースがされます。

Documentation/ja_JP/stable_kernel_rules.txt

@@ -50,16 +50,16 @@ linux-2.6.29/Documentation/stable_kernel_rules.txt
 
 -stable ツリーにパッチを送付する手続き-
 
- - 上記の規則に従っているかを確認した後に、stable@kernel.org にパッチ
+ - 上記の規則に従っているかを確認した後に、stable@vger.kernel.org にパッチ
    を送る。
  - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合
    には NAK を受け取る。この反応は開発者たちのスケジュールによって、数
    日かかる場合がある。
  - もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの
    メンテナーによるレビューのために -stable キューに追加される。
- - パッチに stable@kernel.org のアドレスが付加されているときには、それ
+ - パッチに stable@vger.kernel.org のアドレスが付加されているときには、それ
    が Linus のツリーに入る時に自動的に stable チームに email される。
- - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ
+ - セキュリティパッチはこのエイリアス (stable@vger.kernel.org) に送られるべ
    きではなく、代わりに security@kernel.org のアドレスに送られる。
 
 レビューサイクル-

Documentation/kernel-parameters.txt

@@ -940,6 +940,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.notimeout	[HW] Ignore timeout condition signalled by conroller
 	i8042.reset	[HW] Reset the controller during init and cleanup
 	i8042.unlock	[HW] Unlock (ignore) the keylock
+	i8042.kbdreset  [HW] Reset device connected to KBD port
 
 	i810=		[HW,DRM]
 

Documentation/lzo.txt

@@ -0,0 +1,164 @@
+
+LZO stream format as understood by Linux's LZO decompressor
+===========================================================
+
+Introduction
+
+  This is not a specification. No specification seems to be publicly available
+  for the LZO stream format. This document describes what input format the LZO
+  decompressor as implemented in the Linux kernel understands. The file subject
+  of this analysis is lib/lzo/lzo1x_decompress_safe.c. No analysis was made on
+  the compressor nor on any other implementations though it seems likely that
+  the format matches the standard one. The purpose of this document is to
+  better understand what the code does in order to propose more efficient fixes
+  for future bug reports.
+
+Description
+
+  The stream is composed of a series of instructions, operands, and data. The
+  instructions consist in a few bits representing an opcode, and bits forming
+  the operands for the instruction, whose size and position depend on the
+  opcode and on the number of literals copied by previous instruction. The
+  operands are used to indicate :
+
+    - a distance when copying data from the dictionary (past output buffer)
+    - a length (number of bytes to copy from dictionary)
+    - the number of literals to copy, which is retained in variable "state"
+      as a piece of information for next instructions.
+
+  Optionally depending on the opcode and operands, extra data may follow. These
+  extra data can be a complement for the operand (eg: a length or a distance
+  encoded on larger values), or a literal to be copied to the output buffer.
+
+  The first byte of the block follows a different encoding from other bytes, it
+  seems to be optimized for literal use only, since there is no dictionary yet
+  prior to that byte.
+
+  Lengths are always encoded on a variable size starting with a small number
+  of bits in the operand. If the number of bits isn't enough to represent the
+  length, up to 255 may be added in increments by consuming more bytes with a
+  rate of at most 255 per extra byte (thus the compression ratio cannot exceed
+  around 255:1). The variable length encoding using #bits is always the same :
+
+       length = byte & ((1 << #bits) - 1)
+       if (!length) {
+               length = ((1 << #bits) - 1)
+               length += 255*(number of zero bytes)
+               length += first-non-zero-byte
+       }
+       length += constant (generally 2 or 3)
+
+  For references to the dictionary, distances are relative to the output
+  pointer. Distances are encoded using very few bits belonging to certain
+  ranges, resulting in multiple copy instructions using different encodings.
+  Certain encodings involve one extra byte, others involve two extra bytes
+  forming a little-endian 16-bit quantity (marked LE16 below).
+
+  After any instruction except the large literal copy, 0, 1, 2 or 3 literals
+  are copied before starting the next instruction. The number of literals that
+  were copied may change the meaning and behaviour of the next instruction. In
+  practice, only one instruction needs to know whether 0, less than 4, or more
+  literals were copied. This is the information stored in the <state> variable
+  in this implementation. This number of immediate literals to be copied is
+  generally encoded in the last two bits of the instruction but may also be
+  taken from the last two bits of an extra operand (eg: distance).
+
+  End of stream is declared when a block copy of distance 0 is seen. Only one
+  instruction may encode this distance (0001HLLL), it takes one LE16 operand
+  for the distance, thus requiring 3 bytes.
+
+  IMPORTANT NOTE : in the code some length checks are missing because certain
+  instructions are called under the assumption that a certain number of bytes
+  follow because it has already been garanteed before parsing the instructions.
+  They just have to "refill" this credit if they consume extra bytes. This is
+  an implementation design choice independant on the algorithm or encoding.
+
+Byte sequences
+
+  First byte encoding :
+
+      0..17   : follow regular instruction encoding, see below. It is worth
+                noting that codes 16 and 17 will represent a block copy from
+                the dictionary which is empty, and that they will always be
+                invalid at this place.
+
+      18..21  : copy 0..3 literals
+                state = (byte - 17) = 0..3  [ copy <state> literals ]
+                skip byte
+
+      22..255 : copy literal string
+                length = (byte - 17) = 4..238
+                state = 4 [ don't copy extra literals ]
+                skip byte
+
+  Instruction encoding :
+
+      0 0 0 0 X X X X  (0..15)
+        Depends on the number of literals copied by the last instruction.
+        If last instruction did not copy any literal (state == 0), this
+        encoding will be a copy of 4 or more literal, and must be interpreted
+        like this :
+
+           0 0 0 0 L L L L  (0..15)  : copy long literal string
+           length = 3 + (L ?: 15 + (zero_bytes * 255) + non_zero_byte)
+           state = 4  (no extra literals are copied)
+
+        If last instruction used to copy between 1 to 3 literals (encoded in
+        the instruction's opcode or distance), the instruction is a copy of a
+        2-byte block from the dictionary within a 1kB distance. It is worth
+        noting that this instruction provides little savings since it uses 2
+        bytes to encode a copy of 2 other bytes but it encodes the number of
+        following literals for free. It must be interpreted like this :
+
+           0 0 0 0 D D S S  (0..15)  : copy 2 bytes from <= 1kB distance
+           length = 2
+           state = S (copy S literals after this block)
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 2) + D + 1
+
+        If last instruction used to copy 4 or more literals (as detected by
+        state == 4), the instruction becomes a copy of a 3-byte block from the
+        dictionary from a 2..3kB distance, and must be interpreted like this :
+
+           0 0 0 0 D D S S  (0..15)  : copy 3 bytes from 2..3 kB distance
+           length = 3
+           state = S (copy S literals after this block)
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 2) + D + 2049
+
+      0 0 0 1 H L L L  (16..31)
+           Copy of a block within 16..48kB distance (preferably less than 10B)
+           length = 2 + (L ?: 7 + (zero_bytes * 255) + non_zero_byte)
+        Always followed by exactly one LE16 :  D D D D D D D D : D D D D D D S S
+           distance = 16384 + (H << 14) + D
+           state = S (copy S literals after this block)
+           End of stream is reached if distance == 16384
+
+      0 0 1 L L L L L  (32..63)
+           Copy of small block within 16kB distance (preferably less than 34B)
+           length = 2 + (L ?: 31 + (zero_bytes * 255) + non_zero_byte)
+        Always followed by exactly one LE16 :  D D D D D D D D : D D D D D D S S
+           distance = D + 1
+           state = S (copy S literals after this block)
+
+      0 1 L D D D S S  (64..127)
+           Copy 3-4 bytes from block within 2kB distance
+           state = S (copy S literals after this block)
+           length = 3 + L
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 3) + D + 1
+
+      1 L L D D D S S  (128..255)
+           Copy 5-8 bytes from block within 2kB distance
+           state = S (copy S literals after this block)
+           length = 5 + L
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 3) + D + 1
+
+Authors
+
+  This document was written by Willy Tarreau <w@1wt.eu> on 2014/07/19 during an
+  analysis of the decompression code available in Linux 3.16-rc5. The code is
+  tricky, it is possible that this document contains mistakes or that a few
+  corner cases were overlooked. In any case, please report any doubt, fix, or
+  proposed updates to the author(s) so that the document can be updated.

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -2018,8 +2018,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV66/AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, DS, Essence ST (Deluxe), Essence STX,
-    HDAV1.3 (Deluxe), and HDAV1.3 Slim.
+    i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe),
+    Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim.
 
     This module supports autoprobe and multiple cards.
 

Documentation/stable_kernel_rules.txt

@@ -29,6 +29,9 @@ Rules on what kind of patches are accepted, and which ones are not, into the
 
 Procedure for submitting patches to the -stable tree:
 
+ - If the patch covers files in net/ or drivers/net please follow netdev stable
+   submission guidelines as described in
+   Documentation/networking/netdev-FAQ.txt
  - Send the patch, after verifying that it follows the above rules, to
    stable@vger.kernel.org.  You must note the upstream commit ID in the
    changelog of your submission.

Documentation/usb/usb-serial.txt

@@ -145,7 +145,7 @@ Keyspan PDA Serial Adapter
   Single port DB-9 serial adapter, pushed as a PDA adapter for iMacs (mostly
   sold in Macintosh catalogs, comes in a translucent white/green dongle).
   Fairly simple device. Firmware is homebrew.
-  This driver also works for the Xircom/Entrgra single port serial adapter.
+  This driver also works for the Xircom/Entrega single port serial adapter.
 
   Current status:
    Things that work:

Documentation/video4linux/gspca.txt

@@ -55,6 +55,7 @@ zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
 sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		0458:7045	Genius Look 1320 V2
 sn9c20x		0458:704a	Genius Slim 1320
 sn9c20x		0458:704c	Genius i-Look 1321
 sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)

Documentation/x86/x86_64/mm.txt

@@ -12,6 +12,8 @@ ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
 ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
 ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
+ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
+... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space
 

Documentation/zh_CN/HOWTO

@@ -237,7 +237,7 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循
 如果没有2.6.x.y版本内核存在，那么最新的2.6.x版本内核就相当于是当前的稳定
 版内核。
 
-2.6.x.y版本由“稳定版”小组（邮件地址<stable@kernel.org>）维护，一般隔周发
+2.6.x.y版本由“稳定版”小组（邮件地址<stable@vger.kernel.org>）维护，一般隔周发
 布新版本。
 
 内核源码中的Documentation/stable_kernel_rules.txt文件具体描述了可被稳定

Documentation/zh_CN/stable_kernel_rules.txt

@@ -42,7 +42,7 @@ Documentation/stable_kernel_rules.txt 的中文翻译
 
 向稳定版代码树提交补丁的过程：
 
-  - 在确认了补丁符合以上的规则后，将补丁发送到stable@kernel.org。
+  - 在确认了补丁符合以上的规则后，将补丁发送到stable@vger.kernel.org。
   - 如果补丁被接受到队列里，发送者会收到一个ACK回复，如果没有被接受，收
     到的是NAK回复。回复需要几天的时间，这取决于开发者的时间安排。
   - 被接受的补丁会被加到稳定版本队列里，等待其他开发者的审查。

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 2
-SUBLEVEL = 55
+SUBLEVEL = 69
 EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 
@@ -592,6 +592,8 @@ KBUILD_CFLAGS	+= -fomit-frame-pointer
 endif
 endif
 
+KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
+
 ifdef CONFIG_DEBUG_INFO
 KBUILD_CFLAGS	+= -g
 KBUILD_AFLAGS	+= -gdwarf-2

arch/alpha/include/asm/io.h

@@ -490,6 +490,11 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 }
 #endif
 
+#define ioread16be(p) be16_to_cpu(ioread16(p))
+#define ioread32be(p) be32_to_cpu(ioread32(p))
+#define iowrite16be(v,p) iowrite16(cpu_to_be16(v), (p))
+#define iowrite32be(v,p) iowrite32(cpu_to_be32(v), (p))
+
 #define inb_p		inb
 #define inw_p		inw
 #define inl_p		inl

arch/alpha/mm/fault.c

@@ -150,6 +150,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/arm/Kconfig

@@ -1,6 +1,7 @@
 config ARM
 	bool
 	default y
+	select ARCH_SUPPORTS_ATOMIC_RMW
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_MEMBLOCK

arch/arm/include/asm/cacheflush.h

@@ -202,6 +202,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
 static inline void __flush_icache_all(void)
 {
 	__flush_icache_preferred();
+	dsb();
 }
 
 #define flush_cache_all()		__cpuc_flush_kern_all()

arch/arm/include/asm/div64.h

@@ -156,7 +156,7 @@
 		/* Select the best insn combination to perform the   */	\
 		/* actual __m * __n / (__p << 64) operation.         */	\
 		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
+			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
 				"mov	%Q0, #0"			\
 				: "=&r" (__res)				\
 				: "r" (__m), "r" (__n)			\

arch/arm/include/asm/futex.h

@@ -3,11 +3,6 @@
 
 #ifdef __KERNEL__
 
-#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP)
-/* ARM doesn't provide unprivileged exclusive memory accessors */
-#include <asm-generic/futex.h>
-#else
-
 #include <linux/futex.h>
 #include <linux/uaccess.h>
 #include <asm/errno.h>
@@ -163,6 +158,5 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	return ret;
 }
 
-#endif /* !(CPU_USE_DOMAINS && SMP) */
 #endif /* __KERNEL__ */
 #endif /* _ASM_ARM_FUTEX_H */

arch/arm/include/asm/pgtable-2level.h

@@ -123,6 +123,7 @@
 #define L_PTE_USER		(_AT(pteval_t, 1) << 8)
 #define L_PTE_XN		(_AT(pteval_t, 1) << 9)
 #define L_PTE_SHARED		(_AT(pteval_t, 1) << 10)	/* shared(v6), coherent(xsc3) */
+#define L_PTE_NONE		(_AT(pteval_t, 1) << 11)
 
 /*
  * These are the memory types, defined to be compatible with
@@ -138,6 +139,7 @@
 #define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 0x0c) << 2)	/* 1100 */
 #define L_PTE_MT_DEV_WC		(_AT(pteval_t, 0x09) << 2)	/* 1001 */
 #define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
+#define L_PTE_MT_VECTORS	(_AT(pteval_t, 0x0f) << 2)	/* 1111 */
 #define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
 
 #endif /* _ASM_PGTABLE_2LEVEL_H */

arch/arm/include/asm/pgtable.h

@@ -74,7 +74,7 @@ extern pgprot_t		pgprot_kernel;
 
 #define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
 
-#define PAGE_NONE		_MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY)
+#define PAGE_NONE		_MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY | L_PTE_NONE)
 #define PAGE_SHARED		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN)
 #define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER)
 #define PAGE_COPY		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
@@ -84,7 +84,7 @@ extern pgprot_t		pgprot_kernel;
 #define PAGE_KERNEL		_MOD_PROT(pgprot_kernel, L_PTE_XN)
 #define PAGE_KERNEL_EXEC	pgprot_kernel
 
-#define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN)
+#define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE)
 #define __PAGE_SHARED		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
 #define __PAGE_SHARED_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER)
 #define __PAGE_COPY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
@@ -279,7 +279,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER;
+	const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER | L_PTE_NONE;
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
 	return pte;
 }

arch/arm/include/asm/spinlock.h

@@ -44,18 +44,9 @@
 
 static inline void dsb_sev(void)
 {
-#if __LINUX_ARM_ARCH__ >= 7
-	__asm__ __volatile__ (
-		"dsb\n"
-		SEV
-	);
-#else
-	__asm__ __volatile__ (
-		"mcr p15, 0, %0, c7, c10, 4\n"
-		SEV
-		: : "r" (0)
-	);
-#endif
+
+	dsb();
+	__asm__(SEV);
 }
 
 /*

arch/arm/include/asm/uaccess.h

@@ -158,8 +158,9 @@ extern int __put_user_8(void *, unsigned long long);
 #define put_user(x,p)							\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		const typeof(*(p)) __user *__tmp_p = (p);		\
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\

arch/arm/kernel/crash_dump.c

@@ -39,7 +39,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!csize)
 		return 0;
 
-	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	vaddr = ioremap(__pfn_to_phys(pfn), PAGE_SIZE);
 	if (!vaddr)
 		return -ENOMEM;
 

arch/arm/kernel/entry-header.S

@@ -76,26 +76,21 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_V6)
-	ldr	r0, [sp]
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
-	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
-#else
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	sub	r0, sp, #4			@ uninhabited address
+	strex	r1, r2, [r0]			@ clear the exclusive monitor
 #endif
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
 #endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
@@ -123,7 +118,10 @@
 	.macro	svc_exit, rpsr
 	ldr	lr, [sp, #S_SP]			@ top of the stack
 	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
-	clrex					@ clear the exclusive monitor
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
+
 	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
 	ldmia	sp, {r0 - r12}
 	mov	sp, lr
@@ -132,13 +130,16 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
-	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]	@ get pc
 	add	sp, sp, #\offset + S_SP
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+
 	.if	\fast
 	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
 	.else

arch/arm/lib/memset.S

@@ -14,27 +14,15 @@
 
 	.text
 	.align	5
-	.word	0
-
-1:	subs	r2, r2, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r1, [r0], #1		@ 1
-	strleb	r1, [r0], #1		@ 1
-	strb	r1, [r0], #1		@ 1
-	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memset again.
- */
 
 ENTRY(memset)
 	ands	r3, r0, #3		@ 1 unaligned?
-	bne	1b			@ 1
+	mov	ip, r0			@ preserve r0 as return value
+	bne	6f			@ 1
 /*
- * we know that the pointer in r0 is aligned to a word boundary.
+ * we know that the pointer in ip is aligned to a word boundary.
  */
-	orr	r1, r1, r1, lsl #8
+1:	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
 	mov	r3, r1
 	cmp	r2, #16
@@ -43,29 +31,28 @@ ENTRY(memset)
 #if ! CALGN(1)+0
 
 /*
- * We need an extra register for this loop - save the return address and
- * use the LR
+ * We need 2 extra registers for this loop - use r8 and the LR
  */
-	str	lr, [sp, #-4]!
-	mov	ip, r1
+	stmfd	sp!, {r8, lr}
+	mov	r8, r1
 	mov	lr, r1
 
 2:	subs	r2, r2, #64
-	stmgeia	r0!, {r1, r3, ip, lr}	@ 64 bytes at a time.
-	stmgeia	r0!, {r1, r3, ip, lr}
-	stmgeia	r0!, {r1, r3, ip, lr}
-	stmgeia	r0!, {r1, r3, ip, lr}
+	stmgeia	ip!, {r1, r3, r8, lr}	@ 64 bytes at a time.
+	stmgeia	ip!, {r1, r3, r8, lr}
+	stmgeia	ip!, {r1, r3, r8, lr}
+	stmgeia	ip!, {r1, r3, r8, lr}
 	bgt	2b
-	ldmeqfd	sp!, {pc}		@ Now <64 bytes to go.
+	ldmeqfd	sp!, {r8, pc}		@ Now <64 bytes to go.
 /*
  * No need to correct the count; we're only testing bits from now on
  */
 	tst	r2, #32
-	stmneia	r0!, {r1, r3, ip, lr}
-	stmneia	r0!, {r1, r3, ip, lr}
+	stmneia	ip!, {r1, r3, r8, lr}
+	stmneia	ip!, {r1, r3, r8, lr}
 	tst	r2, #16
-	stmneia	r0!, {r1, r3, ip, lr}
-	ldr	lr, [sp], #4
+	stmneia	ip!, {r1, r3, r8, lr}
+	ldmfd	sp!, {r8, lr}
 
 #else
 
@@ -74,54 +61,63 @@ ENTRY(memset)
  * whole cache lines at once.
  */
 
-	stmfd	sp!, {r4-r7, lr}
+	stmfd	sp!, {r4-r8, lr}
 	mov	r4, r1
 	mov	r5, r1
 	mov	r6, r1
 	mov	r7, r1
-	mov	ip, r1
+	mov	r8, r1
 	mov	lr, r1
 
 	cmp	r2, #96
-	tstgt	r0, #31
+	tstgt	ip, #31
 	ble	3f
 
-	and	ip, r0, #31
-	rsb	ip, ip, #32
-	sub	r2, r2, ip
-	movs	ip, ip, lsl #(32 - 4)
-	stmcsia	r0!, {r4, r5, r6, r7}
-	stmmiia	r0!, {r4, r5}
-	tst	ip, #(1 << 30)
-	mov	ip, r1
-	strne	r1, [r0], #4
+	and	r8, ip, #31
+	rsb	r8, r8, #32
+	sub	r2, r2, r8
+	movs	r8, r8, lsl #(32 - 4)
+	stmcsia	ip!, {r4, r5, r6, r7}
+	stmmiia	ip!, {r4, r5}
+	tst	r8, #(1 << 30)
+	mov	r8, r1
+	strne	r1, [ip], #4
 
 3:	subs	r2, r2, #64
-	stmgeia	r0!, {r1, r3-r7, ip, lr}
-	stmgeia	r0!, {r1, r3-r7, ip, lr}
+	stmgeia	ip!, {r1, r3-r8, lr}
+	stmgeia	ip!, {r1, r3-r8, lr}
 	bgt	3b
-	ldmeqfd	sp!, {r4-r7, pc}
+	ldmeqfd	sp!, {r4-r8, pc}
 
 	tst	r2, #32
-	stmneia	r0!, {r1, r3-r7, ip, lr}
+	stmneia	ip!, {r1, r3-r8, lr}
 	tst	r2, #16
-	stmneia	r0!, {r4-r7}
-	ldmfd	sp!, {r4-r7, lr}
+	stmneia	ip!, {r4-r7}
+	ldmfd	sp!, {r4-r8, lr}
 
 #endif
 
 4:	tst	r2, #8
-	stmneia	r0!, {r1, r3}
+	stmneia	ip!, {r1, r3}
 	tst	r2, #4
-	strne	r1, [r0], #4
+	strne	r1, [ip], #4
 /*
  * When we get here, we've got less than 4 bytes to zero.  We
  * may have an unaligned pointer as well.
  */
 5:	tst	r2, #2
-	strneb	r1, [r0], #1
-	strneb	r1, [r0], #1
+	strneb	r1, [ip], #1
+	strneb	r1, [ip], #1
 	tst	r2, #1
-	strneb	r1, [r0], #1
+	strneb	r1, [ip], #1
 	mov	pc, lr
+
+6:	subs	r2, r2, #4		@ 1 do we have enough
+	blt	5b			@ 1 bytes to align with?
+	cmp	r3, #2			@ 1
+	strltb	r1, [ip], #1		@ 1
+	strleb	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
+	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
+	b	1b
 ENDPROC(memset)

arch/arm/mach-omap2/control.c

@@ -282,7 +282,8 @@ void omap3_save_scratchpad_contents(void)
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(omap3_restore_3630);
 	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
-					omap_rev() != OMAP3430_REV_ES3_1)
+					omap_rev() != OMAP3430_REV_ES3_1 &&
+					omap_rev() != OMAP3430_REV_ES3_1_2)
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(omap3_restore);
 	else

arch/arm/mach-omap2/mux.c

@@ -182,8 +182,10 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
 		m0_entry = mux->muxnames[0];
 
 		/* First check for full name in mode0.muxmode format */
-		if (mode0_len && strncmp(muxname, m0_entry, mode0_len))
-			continue;
+		if (mode0_len)
+			if (strncmp(muxname, m0_entry, mode0_len) ||
+			    (strlen(m0_entry) != mode0_len))
+				continue;
 
 		/* Then check for muxmode only */
 		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {

arch/arm/mach-omap2/omap_l3_noc.c

@@ -121,11 +121,15 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 				/* Nothing to be handled here as of now */
 				break;
 			}
-		/* Error found so break the for loop */
-		break;
+			/* Error found so break the for loop */
+			return IRQ_HANDLED;
 		}
 	}
-	return IRQ_HANDLED;
+
+	dev_err(l3->dev, "L3 %s IRQ not handled!!\n",
+		inttype ? "debug" : "application");
+
+	return IRQ_NONE;
 }
 
 static int __devinit omap4_l3_probe(struct platform_device *pdev)

arch/arm/mach-pxa/corgi.c

@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/io.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
@@ -704,6 +705,8 @@ static void __init corgi_init(void)
 		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_corgi(struct tag *tags, char **cmdline,

arch/arm/mach-pxa/hx4700.c

@@ -835,6 +835,8 @@ static void __init hx4700_init(void)
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
 	mdelay(10);
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")

arch/arm/mach-pxa/poodle.c

@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -453,6 +454,7 @@ static void __init poodle_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
 	poodle_init_spi();
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_poodle(struct tag *tags, char **cmdline,

arch/arm/mach-pxa/spitz.c

@@ -969,6 +969,8 @@ static void __init spitz_init(void)
 	spitz_nor_init();
 	spitz_nand_init();
 	spitz_i2c_init();
+
+	regulator_has_full_constraints();
 }
 
 static void __init spitz_fixup(struct tag *tags, char **cmdline,

arch/arm/mach-sa1100/pm.c

@@ -81,6 +81,7 @@ static int sa11x0_pm_enter(suspend_state_t state)
 	/*
 	 * Ensure not to come back here if it wasn't intended
 	 */
+	RCSR = RCSR_SMR;
 	PSPR = 0;
 
 	/*

arch/arm/mm/Kconfig

@@ -458,7 +458,6 @@ config CPU_32v5
 config CPU_32v6
 	bool
 	select TLS_REG_EMUL if !CPU_32v6K && !MMU
-	select CPU_USE_DOMAINS if CPU_V6 && MMU
 
 config CPU_32v6K
 	bool
@@ -652,7 +651,7 @@ config ARM_THUMBEE
 
 config SWP_EMULATE
 	bool "Emulate SWP/SWPB instructions"
-	depends on !CPU_USE_DOMAINS && CPU_V7
+	depends on CPU_V7
 	select HAVE_PROC_CPU if PROC_FS
 	default y if SMP
 	help

arch/arm/mm/abort-ev6.S

@@ -17,12 +17,6 @@
  */
 	.align	5
 ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
-	sub	r1, sp, #4			@ Get unused stack location
-	strex	r0, r1, [r1]			@ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex
-#endif
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*

arch/arm/mm/abort-ev7.S

@@ -13,12 +13,6 @@
  */
 	.align	5
 ENTRY(v7_early_abort)
-	/*
-	 * The effect of data aborts on on the exclusive access monitor are
-	 * UNPREDICTABLE. Do a CLREX to clear the state
-	 */
-	clrex
-
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 

arch/arm/mm/alignment.c

@@ -38,6 +38,7 @@
  * This code is not portable to processors with late data abort handling.
  */
 #define CODING_BITS(i)	(i & 0x0e000000)
+#define COND_BITS(i)	(i & 0xf0000000)
 
 #define LDST_I_BIT(i)	(i & (1 << 26))		/* Immediate constant	*/
 #define LDST_P_BIT(i)	(i & (1 << 24))		/* Preindex		*/
@@ -812,6 +813,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		break;
 
 	case 0x04000000:	/* ldr or str immediate */
+		if (COND_BITS(instr) == 0xf0000000) /* NEON VLDn, VSTn */
+			goto bad;
 		offset.un = OFFSET_BITS(instr);
 		handler = do_alignment_ldrstr;
 		break;

arch/arm/mm/mmu.c

@@ -425,6 +425,14 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 	}
+	/*
+	 * We don't use domains on ARMv6 (since this causes problems with
+	 * v6/v7 kernels), so we must use a separate memory type for user
+	 * r/o, kernel r/w to map the vectors page.
+	 */
+	if (cpu_arch == CPU_ARCH_ARMv6)
+		vecs_pgprot |= L_PTE_MT_VECTORS;
+
 	/*
 	 * ARMv6 and above have extended page tables.
 	 */

arch/arm/mm/proc-macros.S

@@ -106,13 +106,9 @@
  *  100x   1   0   1	r/o	no acc
  *  10x0   1   0   1	r/o	no acc
  *  1011   0   0   1	r/w	no acc
- *  110x   0   1   0	r/w	r/o
- *  11x0   0   1   0	r/w	r/o
- *  1111   0   1   1	r/w	r/w
- *
- * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
  *  110x   1   1   1	r/o	r/o
  *  11x0   1   1   1	r/o	r/o
+ *  1111   0   1   1	r/w	r/w
  */
 	.macro	armv6_mt_table pfx
 \pfx\()_mt_table:
@@ -131,7 +127,7 @@
 	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
 	.long	0x00						@ unused
 	.long	0x00						@ unused
-	.long	0x00						@ unused
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
 	.endm
 
 	.macro	armv6_set_pte_ext pfx
@@ -152,20 +148,21 @@
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-	@ allow kernel read/write access to read-only user pages
 	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
+
+	@ user read-only -> kernel read-only
+	bicne	r3, r3, #PTE_EXT_AP0
 
 	tst	r1, #L_PTE_XN
 	orrne	r3, r3, #PTE_EXT_XN
 
-	orr	r3, r3, r2
+	eor	r3, r3, r2
 
 	tst	r1, #L_PTE_YOUNG
 	tstne	r1, #L_PTE_PRESENT
 	moveq	r3, #0
+	tstne	r1, #L_PTE_NONE
+	movne	r3, #0
 
 	str	r3, [r0]
 	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte

arch/arm/mm/proc-v6.S

@@ -199,7 +199,6 @@ __v6_setup:
 	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
@@ -209,6 +208,8 @@ __v6_setup:
 	ALT_UP(orr	r8, r8, #TTB_FLAGS_UP)
 	mcr	p15, 0, r8, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer and
+						@ complete invalidations
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8

arch/arm/mm/proc-v7.S

@@ -160,17 +160,14 @@ ENTRY(cpu_v7_set_pte_ext)
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-	@ allow kernel read/write access to read-only user pages
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
 
 	tst	r1, #L_PTE_XN
 	orrne	r3, r3, #PTE_EXT_XN
 
 	tst	r1, #L_PTE_YOUNG
 	tstne	r1, #L_PTE_PRESENT
+	eorne	r1, r1, #L_PTE_NONE
+	tstne	r1, #L_PTE_NONE
 	moveq	r3, #0
 
  ARM(	str	r3, [r0, #2048]! )
@@ -368,7 +365,6 @@ __v7_setup:
 
 3:	mov	r10, #0
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r10, c2, c0, 2		@ TTB control register
@@ -382,6 +378,7 @@ __v7_setup:
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 #endif
+	dsb					@ Complete invalidations
 #ifndef CONFIG_ARM_THUMBEE
 	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
 	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field

arch/arm/mm/proc-xscale.S

@@ -528,7 +528,7 @@ ENTRY(cpu_xscale_do_suspend)
 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
 	mrc	p15, 0, r6, c13, c0, 0	@ PID
 	mrc	p15, 0, r7, c3, c0, 0	@ domain ID
-	mrc	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mrc	p15, 0, r9, c1, c0, 0	@ control reg
 	bic	r4, r4, #2		@ clear frequency change bit
 	stmia	r0, {r4 - r9}		@ store cp regs
@@ -545,7 +545,7 @@ ENTRY(cpu_xscale_do_resume)
 	mcr	p15, 0, r6, c13, c0, 0	@ PID
 	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
 	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
-	mcr	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
 ENDPROC(cpu_xscale_do_resume)

arch/arm/plat-mxc/devices/platform-ipu-core.c

@@ -77,7 +77,7 @@ struct platform_device *__init imx_alloc_mx3_camera(
 
 	pdev = platform_device_alloc("mx3-camera", 0);
 	if (!pdev)
-		goto err;
+		return ERR_PTR(-ENOMEM);
 
 	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
 	if (!pdev->dev.dma_mask)

arch/avr32/Makefile

@@ -11,7 +11,7 @@ all: uImage vmlinux.elf
 
 KBUILD_DEFCONFIG	:= atstk1002_defconfig
 
-KBUILD_CFLAGS	+= -pipe -fno-builtin -mno-pic
+KBUILD_CFLAGS	+= -pipe -fno-builtin -mno-pic -D__linux__
 KBUILD_AFLAGS	+= -mrelax -mno-pic
 KBUILD_CFLAGS_MODULE += -mno-relax
 LDFLAGS_vmlinux	+= --relax

arch/avr32/boards/mimc200/fram.c

@@ -11,6 +11,7 @@
 #define FRAM_VERSION	"1.0"
 
 #include <linux/miscdevice.h>
+#include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/mm.h>
 #include <linux/io.h>

arch/avr32/mm/fault.c

@@ -136,6 +136,8 @@ good_area:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/cris/mm/fault.c

@@ -166,6 +166,8 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/frv/mm/fault.c

@@ -167,6 +167,8 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/ia64/mm/fault.c

@@ -163,6 +163,8 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 		 */
 		if (fault & VM_FAULT_OOM) {
 			goto out_of_memory;
+		} else if (fault & VM_FAULT_SIGSEGV) {
+			goto bad_area;
 		} else if (fault & VM_FAULT_SIGBUS) {
 			signal = SIGBUS;
 			goto bad_area;

arch/m32r/mm/fault.c

@@ -199,6 +199,8 @@ good_area:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/m68k/mm/fault.c

@@ -147,6 +147,8 @@ good_area:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto map_err;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto bus_err;
 		BUG();

arch/m68k/mm/hwtest.c

@@ -28,9 +28,11 @@
 int hwreg_present( volatile void *regp )
 {
     int	ret = 0;
+    unsigned long flags;
     long	save_sp, save_vbr;
     long	tmp_vectors[3];
 
+    local_irq_save(flags);
     __asm__ __volatile__
 	(	"movec	%/vbr,%2\n\t"
 		"movel	#Lberr1,%4@(8)\n\t"
@@ -46,6 +48,7 @@ int hwreg_present( volatile void *regp )
 		: "=&d" (ret), "=&r" (save_sp), "=&r" (save_vbr)
 		: "a" (regp), "a" (tmp_vectors)
                 );
+    local_irq_restore(flags);
 
     return( ret );
 }
@@ -58,9 +61,11 @@ EXPORT_SYMBOL(hwreg_present);
 int hwreg_write( volatile void *regp, unsigned short val )
 {
 	int		ret;
+	unsigned long flags;
 	long	save_sp, save_vbr;
 	long	tmp_vectors[3];
 
+	local_irq_save(flags);
 	__asm__ __volatile__
 	(	"movec	%/vbr,%2\n\t"
 		"movel	#Lberr2,%4@(8)\n\t"
@@ -78,6 +83,7 @@ int hwreg_write( volatile void *regp, unsigned short val )
 		: "=&d" (ret), "=&r" (save_sp), "=&r" (save_vbr)
 		: "a" (regp), "a" (tmp_vectors), "g" (val)
 	);
+	local_irq_restore(flags);
 
 	return( ret );
 }

arch/microblaze/boot/Makefile

@@ -8,7 +8,7 @@ obj-y += linked_dtb.o
 
 targets := linux.bin linux.bin.gz simpleImage.%
 
-OBJCOPYFLAGS := -O binary
+OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
 
 # Ensure system.dtb exists
 $(obj)/linked_dtb.o: $(obj)/system.dtb

arch/microblaze/mm/fault.c

@@ -215,6 +215,8 @@ good_area:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/mips/boot/compressed/decompress.c

@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/string.h>
 
 #include <asm/addrspace.h>
 

arch/mips/cavium-octeon/setup.c

@@ -266,6 +266,18 @@ static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id)
 }
 #endif
 
+static char __read_mostly octeon_system_type[80];
+
+static int __init init_octeon_system_type(void)
+{
+	snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)",
+		cvmx_board_type_to_string(octeon_bootinfo->board_type),
+		octeon_model_get_string(read_c0_prid()));
+
+	return 0;
+}
+early_initcall(init_octeon_system_type);
+
 /**
  * Return a string representing the system type
  *
@@ -273,11 +285,7 @@ static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id)
  */
 const char *octeon_board_type_string(void)
 {
-	static char name[80];
-	sprintf(name, "%s (%s)",
-		cvmx_board_type_to_string(octeon_bootinfo->board_type),
-		octeon_model_get_string(read_c0_prid()));
-	return name;
+	return octeon_system_type;
 }
 
 const char *get_system_type(void)

arch/mips/include/asm/ftrace.h

@@ -24,7 +24,7 @@ do {							\
 	asm volatile (					\
 		"1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\
 		"   li %[" STR(error) "], 0\n"		\
-		"2:\n"					\
+		"2: .insn\n"				\
 							\
 		".section .fixup, \"ax\"\n"		\
 		"3: li %[" STR(error) "], 1\n"		\
@@ -46,7 +46,7 @@ do {						\
 	asm volatile (				\
 		"1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\
 		"   li %[" STR(error) "], 0\n"	\
-		"2:\n"				\
+		"2: .insn\n"			\
 						\
 		".section .fixup, \"ax\"\n"	\
 		"3: li %[" STR(error) "], 1\n"	\

arch/mips/include/asm/thread_info.h

@@ -149,6 +149,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
+#define _TIF_WORK_SYSCALL_ENTRY	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
 /* work to do in syscall_trace_leave() */
 #define _TIF_WORK_SYSCALL_EXIT	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
 

arch/mips/kernel/irq-gic.c

@@ -166,11 +166,13 @@ static void __init gic_setup_intr(unsigned int intr, unsigned int cpu,
 {
 	/* Setup Intr to Pin mapping */
 	if (pin & GIC_MAP_TO_NMI_MSK) {
+		int i;
+
 		GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin);
 		/* FIXME: hack to route NMI to all cpu's */
-		for (cpu = 0; cpu < NR_CPUS; cpu += 32) {
+		for (i = 0; i < NR_CPUS; i += 32) {
 			GICWRITE(GIC_REG_ADDR(SHARED,
-					  GIC_SH_MAP_TO_VPE_REG_OFF(intr, cpu)),
+					  GIC_SH_MAP_TO_VPE_REG_OFF(intr, i)),
 				 0xffffffff);
 		}
 	} else {

arch/mips/kernel/irq-msc01.c

@@ -131,7 +131,7 @@ void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqma
 
 	board_bind_eic_interrupt = &msc_bind_eic_interrupt;
 
-	for (; nirq >= 0; nirq--, imp++) {
+	for (; nirq > 0; nirq--, imp++) {
 		int n = imp->im_irq;
 
 		switch (imp->im_type) {

arch/mips/kernel/irq_cpu.c

@@ -56,6 +56,8 @@ static struct irq_chip mips_cpu_irq_controller = {
 	.irq_mask_ack	= mask_mips_irq,
 	.irq_unmask	= unmask_mips_irq,
 	.irq_eoi	= unmask_mips_irq,
+	.irq_disable	= mask_mips_irq,
+	.irq_enable	= unmask_mips_irq,
 };
 
 /*
@@ -92,6 +94,8 @@ static struct irq_chip mips_mt_cpu_irq_controller = {
 	.irq_mask_ack	= mips_mt_cpu_irq_ack,
 	.irq_unmask	= unmask_mips_irq,
 	.irq_eoi	= unmask_mips_irq,
+	.irq_disable	= mask_mips_irq,
+	.irq_enable	= unmask_mips_irq,
 };
 
 void __init mips_cpu_irq_init(void)

arch/mips/kernel/mcount.S

@@ -119,7 +119,11 @@ NESTED(_mcount, PT_SIZE, ra)
 	 nop
 #endif
 	b	ftrace_stub
+#ifdef CONFIG_32BIT
+	 addiu sp, sp, 8
+#else
 	 nop
+#endif
 
 static_trace:
 	MCOUNT_SAVE_REGS
@@ -129,6 +133,9 @@ static_trace:
 	 move	a1, AT		/* arg2: parent's return address */
 
 	MCOUNT_RESTORE_REGS
+#ifdef CONFIG_32BIT
+	addiu sp, sp, 8
+#endif
 	.globl ftrace_stub
 ftrace_stub:
 	RETURN_BACK
@@ -177,6 +184,11 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra)
 	jal	prepare_ftrace_return
 	 nop
 	MCOUNT_RESTORE_REGS
+#ifndef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_32BIT
+	addiu sp, sp, 8
+#endif
+#endif
 	RETURN_BACK
 	END(ftrace_graph_caller)
 

arch/mips/kernel/perf_event_mipsxx.c

@@ -162,11 +162,6 @@ static unsigned int counters_total_to_per_cpu(unsigned int counters)
 	return counters >> vpe_shift();
 }
 
-static unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
-	return counters << vpe_shift();
-}
-
 #else /* !CONFIG_MIPS_MT_SMP */
 #define vpe_id()	0
 

arch/mips/kernel/ptrace.c

@@ -162,6 +162,7 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
 		__get_user(fregs[i], i + (__u64 __user *) data);
 
 	__get_user(child->thread.fpu.fcr31, data + 64);
+	child->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
 
 	/* FIR may not be written.  */
 
@@ -452,7 +453,7 @@ long arch_ptrace(struct task_struct *child, long request,
 			break;
 #endif
 		case FPC_CSR:
-			child->thread.fpu.fcr31 = data;
+			child->thread.fpu.fcr31 = data & ~FPU_CSR_ALL_X;
 			break;
 		case DSP_BASE ... DSP_BASE + 5: {
 			dspreg_t *dregs;

arch/mips/kernel/scall32-o32.S

@@ -52,7 +52,7 @@ NESTED(handle_sys, PT_SIZE, sp)
 
 stack_done:
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
 	bnez	t0, syscall_trace_entry	# -> yes
 

arch/mips/kernel/scall64-64.S

@@ -54,7 +54,7 @@ NESTED(handle_sys64, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
 	bnez	t0, syscall_trace_entry

arch/mips/kernel/scall64-n32.S

@@ -53,7 +53,7 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
 	bnez	t0, n32_syscall_trace_entry

arch/mips/kernel/scall64-o32.S

@@ -81,7 +81,7 @@ NESTED(handle_sys, PT_SIZE, sp)
 	PTR	4b, bad_stack
 	.previous
 
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
 	bnez	t0, trace_a_syscall

arch/mips/kernel/smp.c

@@ -105,10 +105,10 @@ asmlinkage __cpuinit void start_secondary(void)
 	if ((read_c0_tcbind() & TCBIND_CURTC) == 0)
 #endif /* CONFIG_MIPS_MT_SMTC */
 	cpu_probe();
-	cpu_report();
 	per_cpu_trap_init();
 	mips_clockevent_init();
 	mp_ops->init_secondary();
+	cpu_report();
 
 	/*
 	 * XXX parity protection should be folded in here when it's converted

arch/mips/loongson/common/Makefile

@@ -10,7 +10,8 @@ obj-$(CONFIG_GENERIC_GPIO) += gpio.o
 # Serial port support
 #
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SERIAL_8250) += serial.o
+loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
+obj-y += $(loongson-serial-m) $(loongson-serial-y)
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
 obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 

arch/mips/mm/c-r4k.c

@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
+#include <linux/preempt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -599,11 +600,13 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
 		else
 			blast_scache_range(addr, addr + size);
+		preempt_enable();
 		__sync();
 		return;
 	}
@@ -619,6 +622,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_wback_inv(addr, size);
 	__sync();
@@ -629,13 +633,11 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
 		else {
-			unsigned long lsize = cpu_scache_line_size();
-			unsigned long almask = ~(lsize - 1);
-
 			/*
 			 * There is no clearly documented alignment requirement
 			 * for the cache instruction on MIPS processors and
@@ -644,11 +646,9 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 			 * hit ops with insufficient alignment.  Solved by
 			 * aligning the address to cache line size.
 			 */
-			cache_op(Hit_Writeback_Inv_SD, addr & almask);
-			cache_op(Hit_Writeback_Inv_SD,
-				 (addr + size - 1) & almask);
 			blast_inv_scache_range(addr, addr + size);
 		}
+		preempt_enable();
 		__sync();
 		return;
 	}
@@ -656,14 +656,10 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	if (cpu_has_safe_index_cacheops && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
-		unsigned long lsize = cpu_dcache_line_size();
-		unsigned long almask = ~(lsize - 1);
-
 		R4600_HIT_CACHEOP_WAR_IMPL;
-		cache_op(Hit_Writeback_Inv_D, addr & almask);
-		cache_op(Hit_Writeback_Inv_D, (addr + size - 1)  & almask);
 		blast_inv_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_inv(addr, size);
 	__sync();

arch/mips/mm/fault.c

@@ -149,6 +149,8 @@ good_area:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/mips/mm/tlbex.c

@@ -1282,6 +1282,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	}
 #ifdef CONFIG_HUGETLB_PAGE
 	uasm_l_tlb_huge_update(&l, p);
+	UASM_i_LW(&p, K0, 0, K1);
 	build_huge_update_entries(&p, htlb_info.huge_pte, K1);
 	build_huge_tlb_write_entry(&p, &l, &r, K0, tlb_random,
 				   htlb_info.restore_scratch);

arch/mips/oprofile/backtrace.c

@@ -92,7 +92,7 @@ static inline int unwind_user_frame(struct stackframe *old_frame,
 				/* This marks the end of the previous function,
 				   which means we overran. */
 				break;
-			stack_size = (unsigned) stack_adjustment;
+			stack_size = (unsigned long) stack_adjustment;
 		} else if (is_ra_save_ins(&ip)) {
 			int ra_slot = ip.i_format.simmediate;
 			if (ra_slot < 0)

arch/mips/power/hibernate.S

@@ -44,6 +44,7 @@ LEAF(swsusp_arch_resume)
 	bne t1, t3, 1b
 	PTR_L t0, PBE_NEXT(t0)
 	bnez t0, 0b
+	jal local_flush_tlb_all /* Avoid TLB mismatch after kernel resume */
 	PTR_LA t0, saved_regs
 	PTR_L ra, PT_R31(t0)
 	PTR_L sp, PT_R29(t0)

arch/mn10300/mm/fault.c

@@ -256,6 +256,8 @@ good_area:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/openrisc/kernel/head.S

@@ -19,6 +19,7 @@
 #include <linux/threads.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/serial_reg.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/mmu.h>

arch/openrisc/kernel/init_task.c

@@ -17,6 +17,7 @@
 
 #include <linux/init_task.h>
 #include <linux/mqueue.h>
+#include <linux/export.h>
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);

arch/openrisc/kernel/irq.c

@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
+#include <linux/export.h>
 
 #include <linux/irqflags.h>
 

arch/openrisc/mm/fault.c

@@ -163,6 +163,8 @@ good_area:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/parisc/Makefile

@@ -47,7 +47,12 @@ cflags-y	:= -pipe
 
 # These flags should be implied by an hppa-linux configuration, but they
 # are not in gcc 3.2.
-cflags-y	+= -mno-space-regs -mfast-indirect-calls
+cflags-y	+= -mno-space-regs
+
+# -mfast-indirect-calls is only relevant for 32-bit kernels.
+ifndef CONFIG_64BIT
+cflags-y	+= -mfast-indirect-calls
+endif
 
 # Currently we save and restore fpregs on all kernel entry/interruption paths.
 # If that gets optimized, we might need to disable the use of fpregs in the

arch/parisc/kernel/syscall_table.S

@@ -395,7 +395,7 @@
 	ENTRY_COMP(vmsplice)
 	ENTRY_COMP(move_pages)		/* 295 */
 	ENTRY_SAME(getcpu)
-	ENTRY_SAME(epoll_pwait)
+	ENTRY_COMP(epoll_pwait)
 	ENTRY_COMP(statfs64)
 	ENTRY_COMP(fstatfs64)
 	ENTRY_COMP(kexec_load)		/* 300 */

arch/parisc/mm/fault.c

@@ -210,6 +210,8 @@ good_area:
 		 */
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto bad_area;
 		BUG();

arch/powerpc/Kconfig

@@ -137,6 +137,7 @@ config PPC
 	select HAVE_BPF_JIT if (PPC64 && NET)
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_SUPPORTS_ATOMIC_RMW
 
 config EARLY_PRINTK
 	bool

arch/powerpc/Makefile

@@ -69,7 +69,9 @@ LDFLAGS_vmlinux	:= $(LDFLAGS_vmlinux-yy)
 
 CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=no -mcall-aixdesc
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
-KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
+asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
+
+KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) $(asinstr)
 KBUILD_AFLAGS	+= -Iarch/$(ARCH)
 KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)

arch/powerpc/include/asm/ppc_asm.h

@@ -292,11 +292,16 @@ n:
  *      ld	rY,ADDROFF(name)(rX)
  */
 #ifdef __powerpc64__
+#ifdef HAVE_AS_ATHIGH
+#define __AS_ATHIGH high
+#else
+#define __AS_ATHIGH h
+#endif
 #define LOAD_REG_IMMEDIATE(reg,expr)		\
 	lis     (reg),(expr)@highest;		\
 	ori     (reg),(reg),(expr)@higher;	\
 	rldicr  (reg),(reg),32,31;		\
-	oris    (reg),(reg),(expr)@h;		\
+	oris    reg,reg,(expr)@__AS_ATHIGH;	\
 	ori     (reg),(reg),(expr)@l;
 
 #define LOAD_REG_ADDR(reg,name)			\

arch/powerpc/include/asm/pte-hash64-64k.h

@@ -40,17 +40,39 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/system.h> /* for smp_rmb() */
+
 /*
  * With 64K pages on hash table, we have a special PTE format that
  * uses a second "half" of the page table to encode sub-page information
  * in order to deal with 64K made of 4K HW pages. Thus we override the
  * generic accessors and iterators here
  */
-#define __real_pte(e,p) 	((real_pte_t) { \
-			(e), ((e) & _PAGE_COMBO) ? \
-				(pte_val(*((p) + PTRS_PER_PTE))) : 0 })
-#define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
-        (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
+#define __real_pte __real_pte
+static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
+{
+	real_pte_t rpte;
+
+	rpte.pte = pte;
+	rpte.hidx = 0;
+	if (pte_val(pte) & _PAGE_COMBO) {
+		/*
+		 * Make sure we order the hidx load against the _PAGE_COMBO
+		 * check. The store side ordering is done in __hash_page_4K
+		 */
+		smp_rmb();
+		rpte.hidx = pte_val(*((ptep) + PTRS_PER_PTE));
+	}
+	return rpte;
+}
+
+static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
+{
+	if ((pte_val(rpte.pte) & _PAGE_COMBO))
+		return (rpte.hidx >> (index<<2)) & 0xf;
+	return (pte_val(rpte.pte) >> 12) & 0xf;
+}
+
 #define __rpte_to_pte(r)	((r).pte)
 #define __rpte_sub_valid(rpte, index) \
 	(pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))

arch/powerpc/kernel/cacheinfo.c

@@ -788,6 +788,9 @@ static void remove_cache_dir(struct cache_dir *cache_dir)
 {
 	remove_index_dirs(cache_dir);
 
+	/* Remove cache dir from sysfs */
+	kobject_del(cache_dir->kobj);
+
 	kobject_put(cache_dir->kobj);
 
 	kfree(cache_dir);

arch/powerpc/kernel/crash_dump.c

@@ -108,17 +108,19 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 			size_t csize, unsigned long offset, int userbuf)
 {
 	void  *vaddr;
+	phys_addr_t paddr;
 
 	if (!csize)
 		return 0;
 
 	csize = min_t(size_t, csize, PAGE_SIZE);
+	paddr = pfn << PAGE_SHIFT;
 
-	if ((min_low_pfn < pfn) && (pfn < max_pfn)) {
-		vaddr = __va(pfn << PAGE_SHIFT);
+	if (memblock_is_region_memory(paddr, csize)) {
+		vaddr = __va(paddr);
 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
 	} else {
-		vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+		vaddr = __ioremap(paddr, PAGE_SIZE, 0);
 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
 		iounmap(vaddr);
 	}

arch/powerpc/kernel/legacy_serial.c

@@ -48,6 +48,9 @@ static struct __initdata of_device_id legacy_serial_parents[] = {
 static unsigned int legacy_serial_count;
 static int legacy_serial_console = -1;
 
+static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+	UPF_SHARE_IRQ | UPF_FIXED_PORT;
+
 static unsigned int tsi_serial_in(struct uart_port *p, int offset)
 {
 	unsigned int tmp;
@@ -153,8 +156,6 @@ static int __init add_legacy_soc_port(struct device_node *np,
 {
 	u64 addr;
 	const u32 *addrp;
-	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
-		| UPF_FIXED_PORT;
 	struct device_node *tsi = of_get_parent(np);
 
 	/* We only support ports that have a clock frequency properly
@@ -185,9 +186,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	 * IO port value. It will be fixed up later along with the irq
 	 */
 	if (tsi && !strcmp(tsi->type, "tsi-bridge"))
-		return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+		return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
+				       NO_IRQ, legacy_port_flags, 0);
 	else
-		return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+		return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
+				       NO_IRQ, legacy_port_flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -228,7 +231,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 
 	/* Add port, irq will be dealt with later */
 	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), taddr,
-			       NO_IRQ, UPF_BOOT_AUTOCONF, 0);
+			       NO_IRQ, legacy_port_flags, 0);
 
 }
 
@@ -301,7 +304,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	 * IO port value. It will be fixed up later along with the irq
 	 */
 	return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
-			       UPF_BOOT_AUTOCONF, np != pci_dev);
+			       legacy_port_flags, np != pci_dev);
 }
 #endif
 

arch/powerpc/kernel/pci-common.c

@@ -363,7 +363,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 				      enum pci_mmap_state mmap_state,
 				      int write_combine)
 {
-	unsigned long prot = pgprot_val(protection);
 
 	/* Write combine is always 0 on non-memory space mappings. On
 	 * memory space, if the user didn't pass 1, we check for a
@@ -380,9 +379,9 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 
 	/* XXX would be nice to have a way to ask for write-through */
 	if (write_combine)
-		return pgprot_noncached_wc(prot);
+		return pgprot_noncached_wc(protection);
 	else
-		return pgprot_noncached(prot);
+		return pgprot_noncached(protection);
 }
 
 /*

arch/powerpc/kernel/reloc_64.S

@@ -81,6 +81,7 @@ _GLOBAL(relocate)
 
 6:	blr
 
+.balign 8
 p_dyn:	.llong	__dynamic_start - 0b
 p_rela:	.llong	__rela_dyn_start - 0b
 p_st:	.llong	_stext - 0b

arch/powerpc/kernel/setup-common.c

@@ -449,7 +449,7 @@ void __init smp_setup_cpu_maps(void)
 		for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
 			DBG("    thread %d -> cpu %d (hard id %d)\n",
 			    j, cpu, intserv[j]);
-			set_cpu_present(cpu, true);
+			set_cpu_present(cpu, of_device_is_available(dn));
 			set_hard_smp_processor_id(cpu, intserv[j]);
 			set_cpu_possible(cpu, true);
 			cpu++;

arch/powerpc/kvm/e500_tlb.c

@@ -481,7 +481,7 @@ static inline void kvmppc_e500_priv_release(struct tlbe_priv *priv)
 }
 
 static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu,
-		unsigned int eaddr, int as)
+		gva_t eaddr, int as)
 {
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
 	unsigned int victim, pidsel, tsized;

arch/powerpc/lib/crtsavres.S

@@ -230,6 +230,87 @@ _GLOBAL(_rest32gpr_31_x)
 	mr	1,11
 	blr
 
+#ifdef CONFIG_ALTIVEC
+/* Called with r0 pointing just beyond the end of the vector save area.  */
+
+_GLOBAL(_savevr_20)
+	li	r11,-192
+	stvx	vr20,r11,r0
+_GLOBAL(_savevr_21)
+	li	r11,-176
+	stvx	vr21,r11,r0
+_GLOBAL(_savevr_22)
+	li	r11,-160
+	stvx	vr22,r11,r0
+_GLOBAL(_savevr_23)
+	li	r11,-144
+	stvx	vr23,r11,r0
+_GLOBAL(_savevr_24)
+	li	r11,-128
+	stvx	vr24,r11,r0
+_GLOBAL(_savevr_25)
+	li	r11,-112
+	stvx	vr25,r11,r0
+_GLOBAL(_savevr_26)
+	li	r11,-96
+	stvx	vr26,r11,r0
+_GLOBAL(_savevr_27)
+	li	r11,-80
+	stvx	vr27,r11,r0
+_GLOBAL(_savevr_28)
+	li	r11,-64
+	stvx	vr28,r11,r0
+_GLOBAL(_savevr_29)
+	li	r11,-48
+	stvx	vr29,r11,r0
+_GLOBAL(_savevr_30)
+	li	r11,-32
+	stvx	vr30,r11,r0
+_GLOBAL(_savevr_31)
+	li	r11,-16
+	stvx	vr31,r11,r0
+	blr
+
+_GLOBAL(_restvr_20)
+	li	r11,-192
+	lvx	vr20,r11,r0
+_GLOBAL(_restvr_21)
+	li	r11,-176
+	lvx	vr21,r11,r0
+_GLOBAL(_restvr_22)
+	li	r11,-160
+	lvx	vr22,r11,r0
+_GLOBAL(_restvr_23)
+	li	r11,-144
+	lvx	vr23,r11,r0
+_GLOBAL(_restvr_24)
+	li	r11,-128
+	lvx	vr24,r11,r0
+_GLOBAL(_restvr_25)
+	li	r11,-112
+	lvx	vr25,r11,r0
+_GLOBAL(_restvr_26)
+	li	r11,-96
+	lvx	vr26,r11,r0
+_GLOBAL(_restvr_27)
+	li	r11,-80
+	lvx	vr27,r11,r0
+_GLOBAL(_restvr_28)
+	li	r11,-64
+	lvx	vr28,r11,r0
+_GLOBAL(_restvr_29)
+	li	r11,-48
+	lvx	vr29,r11,r0
+_GLOBAL(_restvr_30)
+	li	r11,-32
+	lvx	vr30,r11,r0
+_GLOBAL(_restvr_31)
+	li	r11,-16
+	lvx	vr31,r11,r0
+	blr
+
+#endif /* CONFIG_ALTIVEC */
+
 #else /* CONFIG_PPC64 */
 
 .globl	_savegpr0_14
@@ -353,6 +434,111 @@ _restgpr0_31:
 	mtlr	r0
 	blr
 
+#ifdef CONFIG_ALTIVEC
+/* Called with r0 pointing just beyond the end of the vector save area.  */
+
+.globl	_savevr_20
+_savevr_20:
+	li	r12,-192
+	stvx	vr20,r12,r0
+.globl	_savevr_21
+_savevr_21:
+	li	r12,-176
+	stvx	vr21,r12,r0
+.globl	_savevr_22
+_savevr_22:
+	li	r12,-160
+	stvx	vr22,r12,r0
+.globl	_savevr_23
+_savevr_23:
+	li	r12,-144
+	stvx	vr23,r12,r0
+.globl	_savevr_24
+_savevr_24:
+	li	r12,-128
+	stvx	vr24,r12,r0
+.globl	_savevr_25
+_savevr_25:
+	li	r12,-112
+	stvx	vr25,r12,r0
+.globl	_savevr_26
+_savevr_26:
+	li	r12,-96
+	stvx	vr26,r12,r0
+.globl	_savevr_27
+_savevr_27:
+	li	r12,-80
+	stvx	vr27,r12,r0
+.globl	_savevr_28
+_savevr_28:
+	li	r12,-64
+	stvx	vr28,r12,r0
+.globl	_savevr_29
+_savevr_29:
+	li	r12,-48
+	stvx	vr29,r12,r0
+.globl	_savevr_30
+_savevr_30:
+	li	r12,-32
+	stvx	vr30,r12,r0
+.globl	_savevr_31
+_savevr_31:
+	li	r12,-16
+	stvx	vr31,r12,r0
+	blr
+
+.globl	_restvr_20
+_restvr_20:
+	li	r12,-192
+	lvx	vr20,r12,r0
+.globl	_restvr_21
+_restvr_21:
+	li	r12,-176
+	lvx	vr21,r12,r0
+.globl	_restvr_22
+_restvr_22:
+	li	r12,-160
+	lvx	vr22,r12,r0
+.globl	_restvr_23
+_restvr_23:
+	li	r12,-144
+	lvx	vr23,r12,r0
+.globl	_restvr_24
+_restvr_24:
+	li	r12,-128
+	lvx	vr24,r12,r0
+.globl	_restvr_25
+_restvr_25:
+	li	r12,-112
+	lvx	vr25,r12,r0
+.globl	_restvr_26
+_restvr_26:
+	li	r12,-96
+	lvx	vr26,r12,r0
+.globl	_restvr_27
+_restvr_27:
+	li	r12,-80
+	lvx	vr27,r12,r0
+.globl	_restvr_28
+_restvr_28:
+	li	r12,-64
+	lvx	vr28,r12,r0
+.globl	_restvr_29
+_restvr_29:
+	li	r12,-48
+	lvx	vr29,r12,r0
+.globl	_restvr_30
+_restvr_30:
+	li	r12,-32
+	lvx	vr30,r12,r0
+.globl	_restvr_31
+_restvr_31:
+	li	r12,-16
+	lvx	vr31,r12,r0
+	blr
+
+#endif /* CONFIG_ALTIVEC */
+
 #endif /* CONFIG_PPC64 */
 
 #endif

arch/powerpc/mm/fault.c

@@ -312,6 +312,8 @@ good_area:
 	 */
 	ret = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(ret & VM_FAULT_ERROR)) {
+		if (ret & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		if (ret & VM_FAULT_OOM)
 			goto out_of_memory;
 		else if (ret & VM_FAULT_SIGBUS)

arch/powerpc/mm/init_64.c

@@ -218,7 +218,8 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
 					     unsigned long phys)
 {
 	int  mapped = htab_bolt_mapping(start, start + page_size, phys,
-					PAGE_KERNEL, mmu_vmemmap_psize,
+					pgprot_val(PAGE_KERNEL),
+					mmu_vmemmap_psize,
 					mmu_kernel_ssize);
 	BUG_ON(mapped < 0);
 }