Linux 3.4.34

commit 18e03310b5 upstream.

The current entry in unusual_cypress.h for the Super TOP SATA bridge devices
seems to be causing corruption on newer revisions of this device.  This has
been reported in Arch Linux and Fedora.  The original patch was tested on
devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice
as 2.20.  Limit the UNUSUAL_DEV entry to devices less than 2.20.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591

The Arch Forum post on this is here:
	https://bbs.archlinux.org/viewtopic.php?id=152011

Reported-by: Carsten S. <carsteniq@yahoo.com>
Tested-by: Carsten S. <carsteniq@yahoo.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-bus-rbd

@@ -51,12 +51,6 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-create_snap
-
-	Create a snapshot:
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
-
 snap_*
 
 	A directory per each snapshot

Documentation/networking/ip-sysctl.txt

@@ -537,6 +537,11 @@ tcp_thin_dupack - BOOLEAN
 	Documentation/networking/tcp-thin.txt
 	Default: 0
 
+tcp_challenge_ack_limit - INTEGER
+	Limits number of Challenge ACK sent per second, as recommended
+	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
+	Default: 100
+
 UDP variables:
 
 udp_mem - vector of 3 INTEGERs: min, pressure, max

MAINTAINERS

@@ -2627,7 +2627,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -4312,7 +4312,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -4563,7 +4563,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 4
-SUBLEVEL = 22
+SUBLEVEL = 34
 EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 

arch/arm/Kconfig

@@ -579,6 +579,7 @@ config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
 	select PCI
+	select PCI_QUIRKS
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select NEED_MACH_IO_H

arch/arm/include/asm/hwcap.h

@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 #if defined(__KERNEL__)

arch/arm/include/asm/vfpmacros.h

@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field

arch/arm/kernel/sched_clock.c

@@ -84,11 +84,11 @@ static void notrace update_sched_clock(void)
 	 * detectable in cyc_to_fixed_sched_clock().
 	 */
 	raw_local_irq_save(flags);
-	cd.epoch_cyc = cyc;
+	cd.epoch_cyc_copy = cyc;
 	smp_wmb();
 	cd.epoch_ns = ns;
 	smp_wmb();
-	cd.epoch_cyc_copy = cyc;
+	cd.epoch_cyc = cyc;
 	raw_local_irq_restore(flags);
 }
 

arch/arm/kernel/swp_emulate.c

@@ -109,10 +109,12 @@ static void set_segfault(struct pt_regs *regs, unsigned long addr)
 {
 	siginfo_t info;
 
+	down_read(&current->mm->mmap_sem);
 	if (find_vma(current->mm, addr) == NULL)
 		info.si_code = SEGV_MAPERR;
 	else
 		info.si_code = SEGV_ACCERR;
+	up_read(&current->mm->mmap_sem);
 
 	info.si_signo = SIGSEGV;
 	info.si_errno = 0;

arch/arm/mach-at91/setup.c

@@ -104,6 +104,8 @@ static void __init soc_detect(u32 dbgu_base)
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
+		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 		at91_boot_soc = at91rm9200_soc;
 		break;
 

arch/arm/mach-dove/include/mach/pm.h

@@ -45,7 +45,7 @@ static inline int pmu_to_irq(int pin)
 
 static inline int irq_to_pmu(int irq)
 {
-	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
 		return irq - IRQ_DOVE_PMU_START;
 
 	return -EINVAL;

arch/arm/mach-dove/irq.c

@@ -61,8 +61,20 @@ static void pmu_irq_ack(struct irq_data *d)
 	int pin = irq_to_pmu(d->irq);
 	u32 u;
 
+	/*
+	 * The PMU mask register is not RW0C: it is RW.  This means that
+	 * the bits take whatever value is written to them; if you write
+	 * a '1', you will set the interrupt.
+	 *
+	 * Unfortunately this means there is NO race free way to clear
+	 * these interrupts.
+	 *
+	 * So, let's structure the code so that the window is as small as
+	 * possible.
+	 */
 	u = ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_CAUSE);
+	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
+	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
 }
 
 static struct irq_chip pmu_irq_chip = {

arch/arm/mach-kirkwood/pcie.c

@@ -212,14 +212,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void __devinit rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;

arch/arm/mach-pxa/include/mach/mfp-pxa27x.h

@@ -462,6 +462,9 @@
 	GPIO76_LCD_PCLK,	\
 	GPIO77_LCD_BIAS
 
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
 
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */

arch/arm/mach-pxa/include/mach/smemc.h

@@ -37,6 +37,7 @@
 #define CSADRCFG1	(SMEMC_VIRT + 0x84)  /* Address Configuration Register for CS1 */
 #define CSADRCFG2	(SMEMC_VIRT + 0x88)  /* Address Configuration Register for CS2 */
 #define CSADRCFG3	(SMEMC_VIRT + 0x8C)  /* Address Configuration Register for CS3 */
+#define CSMSADRCFG	(SMEMC_VIRT + 0xA0)  /* Chip Select Configuration Register */
 
 /*
  * More handy macros for PCMCIA

arch/arm/mach-pxa/pxa27x.c

@@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
+	GPIO113_AC97_nRESET_GPIO_HIGH,
 	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
+	GPIO95_AC97_nRESET_GPIO_HIGH,
 	GPIO95_AC97_nRESET,
 };
 

arch/arm/mach-pxa/smemc.c

@@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void)
 	__raw_writel(csadrcfg[1], CSADRCFG1);
 	__raw_writel(csadrcfg[2], CSADRCFG2);
 	__raw_writel(csadrcfg[3], CSADRCFG3);
+	/* CSMSADRCFG wakes up in its default state (0), so we need to set it */
+	__raw_writel(0x2, CSMSADRCFG);
 }
 
 static struct syscore_ops smemc_syscore_ops = {
@@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_ops = {
 
 static int __init smemc_init(void)
 {
-	if (cpu_is_pxa3xx())
+	if (cpu_is_pxa3xx()) {
+		/*
+		 * The only documentation we have on the
+		 * Chip Select Configuration Register (CSMSADRCFG) is that
+		 * it must be programmed to 0x2.
+		 * Moreover, in the bit definitions, the second bit
+		 * (CSMSADRCFG[1]) is called "SETALWAYS".
+		 * Other bits are reserved in this register.
+		 */
+		__raw_writel(0x2, CSMSADRCFG);
+
 		register_syscore_ops(&smemc_syscore_ops);
+	}
 
 	return 0;
 }

arch/arm/mach-realview/include/mach/board-eb.h

@@ -47,7 +47,7 @@
 #define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
 
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x10100000
 #define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
 #else

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

@@ -40,17 +40,17 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		moveq	\rd, \rd, lsr #SHIFT_2440TXF
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
 	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
@@ -68,18 +68,18 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 
 10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
 	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 	.endm
 

arch/arm/mach-s3c24xx/include/mach/entry-macro.S

@@ -31,10 +31,10 @@
 
 		@@ try the interrupt offset register, since it is there
 
-		ldr	\irqstat, [ \base, #INTPND ]
+		ldr	\irqstat, [\base, #INTPND ]
 		teq	\irqstat, #0
 		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
+		ldr	\irqnr, [\base, #INTOFFSET ]
 		mov	\tmp, #1
 		tst	\irqstat, \tmp, lsl \irqnr
 		bne	1001f

arch/arm/mach-s3c24xx/pm-h1940.S

@@ -30,4 +30,4 @@
 
 h1940_pm_return:
 	mov	r0, #S3C2410_PA_GPIO
-	ldr	pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
+	ldr	pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]

arch/arm/mach-s3c24xx/sleep-s3c2410.S

@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
 	ldr	r4, =S3C2410_REFRESH
 	ldr	r5, =S3C24XX_MISCCR
 	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+	ldr	r7, [r4]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [r5]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [r6]		@ get CLKCON (and ensure in TLB)
 
 	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
 	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
 	@@ align next bit of code to cache line
 	.align	5
 s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
+	streq	r7, [r4]			@ SDRAM sleep command
+	streq	r8, [r5]			@ SDRAM power-down config
+	streq	r9, [r6]			@ CPU sleep
 1:	beq	1b
 	mov	pc, r14

arch/arm/mach-s3c24xx/sleep-s3c2412.S

@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
 	 * retry, as simply returning causes the system to lock.
 	*/
 
-	ldrne	r9, [ r1 ]
-	strne	r9, [ r1 ]
-	ldrne	r9, [ r2 ]
-	strne	r9, [ r2 ]
-	ldrne	r9, [ r3 ]
-	strne	r9, [ r3 ]
+	ldrne	r9, [r1]
+	strne	r9, [r1]
+	ldrne	r9, [r2]
+	strne	r9, [r2]
+	ldrne	r9, [r3]
+	strne	r9, [r3]
 	bne	s3c2412_sleep_enter1
 
 	mov	pc, r14

arch/arm/mm/dma-mapping.c

@@ -503,25 +503,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t size, enum dma_data_direction dir,
 	void (*op)(const void *, size_t, int))
 {
+	unsigned long pfn;
+	size_t left = size;
+
+	pfn = page_to_pfn(page) + offset / PAGE_SIZE;
+	offset %= PAGE_SIZE;
+
 	/*
 	 * A single sg entry may refer to multiple physically contiguous
 	 * pages.  But we still need to process highmem pages individually.
 	 * If highmem is not configured then the bulk of this loop gets
 	 * optimized out.
 	 */
-	size_t left = size;
 	do {
 		size_t len = left;
 		void *vaddr;
 
+		page = pfn_to_page(pfn);
+
 		if (PageHighMem(page)) {
-			if (len + offset > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset / PAGE_SIZE;
-					offset %= PAGE_SIZE;
-				}
+			if (len + offset > PAGE_SIZE)
 				len = PAGE_SIZE - offset;
-			}
 			vaddr = kmap_high_get(page);
 			if (vaddr) {
 				vaddr += offset;
@@ -538,7 +540,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 			op(vaddr, len, dir);
 		}
 		offset = 0;
-		page++;
+		pfn++;
 		left -= len;
 	} while (left);
 }

arch/arm/mm/mmu.c

@@ -497,7 +497,7 @@ static void __init build_mem_type_table(void)
 #endif
 
 	for (i = 0; i < 16; i++) {
-		unsigned long v = pgprot_val(protection_map[i]);
+		pteval_t v = pgprot_val(protection_map[i]);
 		protection_map[i] = __pgprot(v | user_pgprot);
 	}
 

arch/arm/plat-samsung/include/plat/debug-macro.S

@@ -14,12 +14,12 @@
 /* The S5PV210/S5PC110 implementations are as belows. */
 
 	.macro fifo_level_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -27,7 +27,7 @@
  * most widely re-used */
 
 	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -36,7 +36,7 @@
 #endif
 
 	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -45,11 +45,11 @@
 #endif
 
 	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
+		strb 	\rd, [\rx, # S3C2410_UTXH]
 	.endm
 
 	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -60,7 +60,7 @@
 
 1001:
 		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -68,7 +68,7 @@
 	.endm
 
 	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -79,7 +79,7 @@
 		b	1002f
 1001:
 		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 

arch/arm/vfp/entry.S

@@ -22,7 +22,7 @@
 @  IRQs disabled.
 @
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	add	r11, r4, #1		@ increment it
 	str	r11, [r10, #TI_PREEMPT]
@@ -35,7 +35,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)
 
 	__INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it

arch/arm/vfp/vfphw.S

@@ -167,7 +167,7 @@ vfp_hw_state_valid:
 					@ else it's one 32-bit instruction, so
 					@ always subtract 4 from the following
 					@ instruction address.
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -191,7 +191,7 @@ look_for_VFP_exceptions:
 	@ not recognised by VFP
 
 	DBGSTR	"not VFP"
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it

arch/arm/vfp/vfpmodule.c

@@ -701,11 +701,14 @@ static int __init vfp_init(void)
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
+			 * Check for VFPv3 D16 and VFPv4 D16.  CPUs in
+			 * this configuration only have 16 x 64bit
+			 * registers.
 			 */
 			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
+				elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+			else
+				elf_hwcap |= HWCAP_VFPD32;
 		}
 #endif
 		/*

arch/cris/include/asm/io.h

@@ -133,12 +133,39 @@ static inline void writel(unsigned int b, volatile void __iomem *addr)
 #define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0)
 #define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0)
 #define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0)
-#define outb(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,1,1)
-#define outw(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,2,1)
-#define outl(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,4,1)
-#define outsb(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,1,count)
-#define outsw(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,2,count)
-#define outsl(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,3,count)
+static inline void outb(unsigned char data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 1, 1);
+}
+static inline void outw(unsigned short data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 2, 1);
+}
+static inline void outl(unsigned int data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 4, 1);
+}
+static inline void outsb(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 1, count);
+}
+static inline void outsw(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 2, count);
+}
+static inline void outsl(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 4, count);
+}
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem

arch/mips/kernel/process.c

@@ -72,9 +72,7 @@ void __noreturn cpu_idle(void)
 			}
 		}
 #ifdef CONFIG_HOTPLUG_CPU
-		if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
-		    (system_state == SYSTEM_RUNNING ||
-		     system_state == SYSTEM_BOOTING))
+		if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map))
 			play_dead();
 #endif
 		rcu_idle_exit();

arch/parisc/include/asm/pgtable.h

@@ -12,11 +12,10 @@
 
 #include <linux/bitops.h>
 #include <linux/spinlock.h>
+#include <linux/mm_types.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
 
-struct vm_area_struct;
-
 /*
  * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
  * memory.  For the return value to be meaningful, ADDR must be >=
@@ -40,7 +39,14 @@ struct vm_area_struct;
         do{                                                     \
                 *(pteptr) = (pteval);                           \
         } while(0)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+extern void purge_tlb_entries(struct mm_struct *, unsigned long);
+
+#define set_pte_at(mm, addr, ptep, pteval)                      \
+	do {                                                    \
+		set_pte(ptep, pteval);                          \
+		purge_tlb_entries(mm, addr);                    \
+	} while (0)
 
 #endif /* !__ASSEMBLY__ */
 
@@ -466,6 +472,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 		old = pte_val(*ptep);
 		new = pte_val(pte_wrprotect(__pte (old)));
 	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+	purge_tlb_entries(mm, addr);
 #else
 	pte_t old_pte = *ptep;
 	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));

arch/parisc/kernel/cache.c

@@ -420,6 +420,24 @@ void kunmap_parisc(void *addr)
 EXPORT_SYMBOL(kunmap_parisc);
 #endif
 
+void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
+{
+	unsigned long flags;
+
+	/* Note: purge_tlb_entries can be called at startup with
+	   no context.  */
+
+	/* Disable preemption while we play with %sr1.  */
+	preempt_disable();
+	mtsp(mm->context, 1);
+	purge_tlb_start(flags);
+	pdtlb(addr);
+	pitlb(addr);
+	purge_tlb_end(flags);
+	preempt_enable();
+}
+EXPORT_SYMBOL(purge_tlb_entries);
+
 void __flush_tlb_range(unsigned long sid, unsigned long start,
 		       unsigned long end)
 {

arch/powerpc/kernel/head_64.S

@@ -422,7 +422,7 @@ _STATIC(__after_prom_start)
 	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
 #endif
 
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_RELOCATABLE
 /*
  * Check if the kernel has to be running as relocatable kernel based on the
  * variable __run_at_load, if it is set the kernel is treated as relocatable

arch/powerpc/kernel/machine_kexec_64.c

@@ -162,6 +162,8 @@ static int kexec_all_irq_disabled = 0;
 static void kexec_smp_down(void *arg)
 {
 	local_irq_disable();
+	hard_irq_disable();
+
 	mb(); /* make sure our irqs are disabled before we say they are */
 	get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
 	while(kexec_all_irq_disabled == 0)
@@ -244,6 +246,8 @@ static void kexec_prepare_cpus(void)
 	wake_offline_cpus();
 	smp_call_function(kexec_smp_down, NULL, /* wait */0);
 	local_irq_disable();
+	hard_irq_disable();
+
 	mb(); /* make sure IRQs are disabled before we say they are */
 	get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
 
@@ -281,6 +285,7 @@ static void kexec_prepare_cpus(void)
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 0);
 	local_irq_disable();
+	hard_irq_disable();
 }
 
 #endif /* SMP */

arch/powerpc/kernel/time.c

@@ -749,13 +749,8 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
 
 void update_vsyscall_tz(void)
 {
-	/* Make userspace gettimeofday spin until we're done. */
-	++vdso_data->tb_update_count;
-	smp_mb();
 	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
 	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
-	smp_mb();
-	++vdso_data->tb_update_count;
 }
 
 static void __init clocksource_init(void)

arch/powerpc/kvm/44x_emulate.c

@@ -79,6 +79,7 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				run->dcr.dcrn = dcrn;
 				run->dcr.data =  0;
 				run->dcr.is_write = 0;
+				vcpu->arch.dcr_is_write = 0;
 				vcpu->arch.io_gpr = rt;
 				vcpu->arch.dcr_needed = 1;
 				kvmppc_account_exit(vcpu, DCR_EXITS);
@@ -100,6 +101,7 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				run->dcr.dcrn = dcrn;
 				run->dcr.data = kvmppc_get_gpr(vcpu, rs);
 				run->dcr.is_write = 1;
+				vcpu->arch.dcr_is_write = 1;
 				vcpu->arch.dcr_needed = 1;
 				kvmppc_account_exit(vcpu, DCR_EXITS);
 				emulated = EMULATE_DO_DCR;

arch/powerpc/platforms/40x/ppc40x_simple.c

@@ -57,7 +57,8 @@ static const char *board[] __initdata = {
 	"amcc,makalu",
 	"apm,klondike",
 	"est,hotfoot",
-	"plathome,obs600"
+	"plathome,obs600",
+	NULL
 };
 
 static int __init ppc40x_probe(void)

arch/s390/include/asm/timex.h

@@ -137,4 +137,32 @@ static inline unsigned long long get_clock_monotonic(void)
 	return get_clock_xt() - sched_clock_base_cc;
 }
 
+/**
+ * tod_to_ns - convert a TOD format value to nanoseconds
+ * @todval: to be converted TOD format value
+ * Returns: number of nanoseconds that correspond to the TOD format value
+ *
+ * Converting a 64 Bit TOD format value to nanoseconds means that the value
+ * must be divided by 4.096. In order to achieve that we multiply with 125
+ * and divide by 512:
+ *
+ *    ns = (todval * 125) >> 9;
+ *
+ * In order to avoid an overflow with the multiplication we can rewrite this.
+ * With a split todval == 2^32 * th + tl (th upper 32 bits, tl lower 32 bits)
+ * we end up with
+ *
+ *    ns = ((2^32 * th + tl) * 125 ) >> 9;
+ * -> ns = (2^23 * th * 125) + ((tl * 125) >> 9);
+ *
+ */
+static inline unsigned long long tod_to_ns(unsigned long long todval)
+{
+	unsigned long long ns;
+
+	ns = ((todval >> 32) << 23) * 125;
+	ns += ((todval & 0xffffffff) * 125) >> 9;
+	return ns;
+}
+
 #endif

arch/s390/kernel/time.c

@@ -64,7 +64,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
  */
 unsigned long long notrace __kprobes sched_clock(void)
 {
-	return (get_clock_monotonic() * 125) >> 9;
+	return tod_to_ns(get_clock_monotonic());
 }
 
 /*
@@ -121,6 +121,9 @@ static int s390_next_ktime(ktime_t expires,
 	nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
 	do_div(nsecs, 125);
 	S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
+	/* Program the maximum value if we have an overflow (== year 2042) */
+	if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
+		S390_lowcore.clock_comparator = -1ULL;
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	return 0;
 }

arch/s390/kvm/interrupt.c

@@ -390,7 +390,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
 		return 0;
 	}
 
-	sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9;
+	sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
 
 	hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL);
 	VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime);

arch/s390/kvm/kvm-s390.c

@@ -677,6 +677,14 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
 	} else
 		prefix = 0;
 
+	/*
+	 * The guest FPRS and ACRS are in the host FPRS/ACRS due to the lazy
+	 * copying in vcpu load/put. Lets update our copies before we save
+	 * it into the save area
+	 */
+	save_fp_regs(&vcpu->arch.guest_fpregs);
+	save_access_regs(vcpu->run->s.regs.acrs);
+
 	if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs),
 			vcpu->arch.guest_fpregs.fprs, 128, prefix))
 		return -EFAULT;

arch/sh/include/asm/elf.h

@@ -202,9 +202,9 @@ extern void __kernel_vsyscall;
 	if (vdso_enabled)					\
 		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);	\
 	else							\
-		NEW_AUX_ENT(AT_IGNORE, 0);
+		NEW_AUX_ENT(AT_IGNORE, 0)
 #else
-#define VSYSCALL_AUX_ENT
+#define VSYSCALL_AUX_ENT	NEW_AUX_ENT(AT_IGNORE, 0)
 #endif /* CONFIG_VSYSCALL */
 
 #ifdef CONFIG_SH_FPU

arch/sparc/include/asm/hugetlb.h

@@ -58,14 +58,20 @@ static inline pte_t huge_pte_wrprotect(pte_t pte)
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 					   unsigned long addr, pte_t *ptep)
 {
-	ptep_set_wrprotect(mm, addr, ptep);
+	pte_t old_pte = *ptep;
+	set_huge_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
 }
 
 static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 					     unsigned long addr, pte_t *ptep,
 					     pte_t pte, int dirty)
 {
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+	int changed = !pte_same(*ptep, pte);
+	if (changed) {
+		set_huge_pte_at(vma->vm_mm, addr, ptep, pte);
+		flush_tlb_page(vma, addr);
+	}
+	return changed;
 }
 
 static inline pte_t huge_ptep_get(pte_t *ptep)

arch/x86/Kconfig

@@ -1243,10 +1243,6 @@ config HAVE_ARCH_BOOTMEM
 	def_bool y
 	depends on X86_32 && NUMA
 
-config HAVE_ARCH_ALLOC_REMAP
-	def_bool y
-	depends on X86_32 && NUMA
-
 config ARCH_HAVE_MEMORY_PRESENT
 	def_bool y
 	depends on X86_32 && DISCONTIGMEM

arch/x86/ia32/ia32entry.S

@@ -205,7 +205,7 @@ sysexit_from_sys_call:
 	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jnz ia32_ret_from_sys_call
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	movl %eax,%esi		/* second arg, syscall return value */
 	cmpl $-MAX_ERRNO,%eax	/* is it an error ? */
 	jbe 1f
@@ -215,7 +215,7 @@ sysexit_from_sys_call:
 	call __audit_syscall_exit
 	movq RAX-ARGOFFSET(%rsp),%rax	/* reload syscall return value */
 	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jz \exit

arch/x86/include/asm/efi.h

@@ -94,6 +94,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
 #endif /* CONFIG_X86_32 */
 
 extern int add_efi_memmap;
+extern unsigned long x86_efi_facility;
 extern void efi_set_executable(efi_memory_desc_t *md, bool executable);
 extern int efi_memblock_x86_reserve_range(void);
 extern void efi_call_phys_prelog(void);

arch/x86/include/asm/fpu-internal.h

@@ -334,14 +334,17 @@ static inline void __thread_fpu_begin(struct task_struct *tsk)
 typedef struct { int preload; } fpu_switch_t;
 
 /*
- * FIXME! We could do a totally lazy restore, but we need to
- * add a per-cpu "this was the task that last touched the FPU
- * on this CPU" variable, and the task needs to have a "I last
- * touched the FPU on this CPU" and check them.
+ * Must be run with preemption disabled: this clears the fpu_owner_task,
+ * on this CPU.
  *
- * We don't do that yet, so "fpu_lazy_restore()" always returns
- * false, but some day..
+ * This will disable any lazy FPU state restore of the current FPU state,
+ * but if the current thread owns the FPU, it will still be saved by.
  */
+static inline void __cpu_disable_lazy_restore(unsigned int cpu)
+{
+	per_cpu(fpu_owner_task, cpu) = NULL;
+}
+
 static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
 {
 	return new == percpu_read_stable(fpu_owner_task) &&

arch/x86/include/asm/mmzone_32.h

@@ -14,12 +14,6 @@ extern struct pglist_data *node_data[];
 
 #include <asm/numaq.h>
 
-extern void resume_map_numa_kva(pgd_t *pgd);
-
-#else /* !CONFIG_NUMA */
-
-static inline void resume_map_numa_kva(pgd_t *pgd) {}
-
 #endif /* CONFIG_NUMA */
 
 #ifdef CONFIG_DISCONTIGMEM

arch/x86/include/asm/pgtable.h

@@ -142,6 +142,11 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
 	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
+static inline unsigned long pud_pfn(pud_t pud)
+{
+	return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
 
 static inline int pmd_large(pmd_t pte)

arch/x86/kernel/apic/x2apic_phys.c

@@ -20,18 +20,19 @@ static int set_x2apic_phys_mode(char *arg)
 }
 early_param("x2apic_phys", set_x2apic_phys_mode);
 
+static bool x2apic_fadt_phys(void)
+{
+	if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
+		printk(KERN_DEBUG "System requires x2apic physical mode\n");
+		return true;
+	}
+	return false;
+}
+
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	if (x2apic_phys)
-		return x2apic_enabled();
-	else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
-		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
-		x2apic_enabled()) {
-		printk(KERN_DEBUG "System requires x2apic physical mode\n");
-		return 1;
-	}
-	else
-		return 0;
+	return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
 }
 
 static void
@@ -114,7 +115,7 @@ static void init_x2apic_ldr(void)
 
 static int x2apic_phys_probe(void)
 {
-	if (x2apic_mode && x2apic_phys)
+	if (x2apic_mode && (x2apic_phys || x2apic_fadt_phys()))
 		return 1;
 
 	return apic == &apic_x2apic_phys;

arch/x86/kernel/cpu/amd.c

@@ -598,6 +598,34 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 	}
 
+	/*
+	 * The way access filter has a performance penalty on some workloads.
+	 * Disable it on the affected CPUs.
+	 */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
+		u64 val;
+
+		if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) {
+			val |= 0x1E;
+			checking_wrmsrl(0xc0011021, val);
+		}
+	}
+
+	/*
+	 * The way access filter has a performance penalty on some workloads.
+	 * Disable it on the affected CPUs.
+	 */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
+		u64 val;
+
+		if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) {
+			val |= 0x1E;
+			checking_wrmsrl(0xc0011021, val);
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */

arch/x86/kernel/cpu/mshyperv.c

@@ -68,7 +68,8 @@ static void __init ms_hyperv_init_platform(void)
 	printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
 	       ms_hyperv.features, ms_hyperv.hints);
 
-	clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
+	if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
+		clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
 }
 
 const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {

arch/x86/kernel/entry_32.S

@@ -1074,7 +1074,6 @@ ENTRY(xen_failsafe_callback)
 	lea 16(%esp),%esp
 	CFI_ADJUST_CFA_OFFSET -16
 	jz 5f
-	addl $16,%esp
 	jmp iret_exc
 5:	pushl_cfi $-1 /* orig_ax = -1 => not a system call */
 	SAVE_ALL

arch/x86/kernel/hpet.c

@@ -431,7 +431,7 @@ void hpet_msi_unmask(struct irq_data *data)
 
 	/* unmask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg |= HPET_TN_FSB;
+	cfg |= HPET_TN_ENABLE | HPET_TN_FSB;
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 
@@ -442,7 +442,7 @@ void hpet_msi_mask(struct irq_data *data)
 
 	/* mask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg &= ~HPET_TN_FSB;
+	cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB);
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 

arch/x86/kernel/msr.c

@@ -174,6 +174,9 @@ static int msr_open(struct inode *inode, struct file *file)
 	unsigned int cpu;
 	struct cpuinfo_x86 *c;
 
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
 	cpu = iminor(file->f_path.dentry->d_inode);
 	if (cpu >= nr_cpu_ids || !cpu_online(cpu))
 		return -ENXIO;	/* No such CPU */

arch/x86/kernel/reboot.c

@@ -619,7 +619,7 @@ static void native_machine_emergency_restart(void)
 			break;
 
 		case BOOT_EFI:
-			if (efi_enabled)
+			if (efi_enabled(EFI_RUNTIME_SERVICES))
 				efi.reset_system(reboot_mode ?
 						 EFI_RESET_WARM :
 						 EFI_RESET_COLD,

arch/x86/kernel/setup.c

@@ -620,6 +620,83 @@ static __init void reserve_ibft_region(void)
 
 static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
 
+static bool __init snb_gfx_workaround_needed(void)
+{
+#ifdef CONFIG_PCI
+	int i;
+	u16 vendor, devid;
+	static const u16 snb_ids[] = {
+		0x0102,
+		0x0112,
+		0x0122,
+		0x0106,
+		0x0116,
+		0x0126,
+		0x010a,
+	};
+
+	/* Assume no if something weird is going on with PCI */
+	if (!early_pci_allowed())
+		return false;
+
+	vendor = read_pci_config_16(0, 2, 0, PCI_VENDOR_ID);
+	if (vendor != 0x8086)
+		return false;
+
+	devid = read_pci_config_16(0, 2, 0, PCI_DEVICE_ID);
+	for (i = 0; i < ARRAY_SIZE(snb_ids); i++)
+		if (devid == snb_ids[i])
+			return true;
+#endif
+
+	return false;
+}
+
+/*
+ * Sandy Bridge graphics has trouble with certain ranges, exclude
+ * them from allocation.
+ */
+static void __init trim_snb_memory(void)
+{
+	static const unsigned long bad_pages[] = {
+		0x20050000,
+		0x20110000,
+		0x20130000,
+		0x20138000,
+		0x40004000,
+	};
+	int i;
+
+	if (!snb_gfx_workaround_needed())
+		return;
+
+	printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n");
+
+	/*
+	 * Reserve all memory below the 1 MB mark that has not
+	 * already been reserved.
+	 */
+	memblock_reserve(0, 1<<20);
+
+	for (i = 0; i < ARRAY_SIZE(bad_pages); i++) {
+		if (memblock_reserve(bad_pages[i], PAGE_SIZE))
+			printk(KERN_WARNING "failed to reserve 0x%08lx\n",
+			       bad_pages[i]);
+	}
+}
+
+/*
+ * Here we put platform-specific memory range workarounds, i.e.
+ * memory known to be corrupt or otherwise in need to be reserved on
+ * specific platforms.
+ *
+ * If this gets used more widely it could use a real dispatch mechanism.
+ */
+static void __init trim_platform_memory_ranges(void)
+{
+	trim_snb_memory();
+}
+
 static void __init trim_bios_range(void)
 {
 	/*
@@ -640,6 +717,7 @@ static void __init trim_bios_range(void)
 	 * take them out.
 	 */
 	e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
+
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 }
 
@@ -740,15 +818,15 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_EFI
 	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
 		     "EL32", 4)) {
-		efi_enabled = 1;
-		efi_64bit = false;
+		set_bit(EFI_BOOT, &x86_efi_facility);
 	} else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
 		     "EL64", 4)) {
-		efi_enabled = 1;
-		efi_64bit = true;
+		set_bit(EFI_BOOT, &x86_efi_facility);
+		set_bit(EFI_64BIT, &x86_efi_facility);
 	}
-	if (efi_enabled && efi_memblock_x86_reserve_range())
-		efi_enabled = 0;
+
+	if (efi_enabled(EFI_BOOT))
+		efi_memblock_x86_reserve_range();
 #endif
 
 	x86_init.oem.arch_setup();
@@ -821,7 +899,7 @@ void __init setup_arch(char **cmdline_p)
 
 	finish_e820_parsing();
 
-	if (efi_enabled)
+	if (efi_enabled(EFI_BOOT))
 		efi_init();
 
 	dmi_scan_machine();
@@ -904,7 +982,7 @@ void __init setup_arch(char **cmdline_p)
 	 * The EFI specification says that boot service code won't be called
 	 * after ExitBootServices(). This is, in fact, a lie.
 	 */
-	if (efi_enabled)
+	if (efi_enabled(EFI_MEMMAP))
 		efi_reserve_boot_services();
 
 	/* preallocate 4k for mptable mpc */
@@ -919,6 +997,8 @@ void __init setup_arch(char **cmdline_p)
 
 	setup_trampolines();
 
+	trim_platform_memory_ranges();
+
 	init_gbpages();
 
 	/* max_pfn_mapped is updated here */
@@ -1039,7 +1119,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+	if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
 		conswitchp = &vga_con;
 #elif defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;
@@ -1056,14 +1136,14 @@ void __init setup_arch(char **cmdline_p)
 	arch_init_ideal_nops();
 
 #ifdef CONFIG_EFI
-	/* Once setup is done above, disable efi_enabled on mismatched
-	 * firmware/kernel archtectures since there is no support for
-	 * runtime services.
+	/* Once setup is done above, unmap the EFI memory map on
+	 * mismatched firmware/kernel archtectures since there is no
+	 * support for runtime services.
 	 */
-	if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) {
+	if (efi_enabled(EFI_BOOT) &&
+	    IS_ENABLED(CONFIG_X86_64) != efi_enabled(EFI_64BIT)) {
 		pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
 		efi_unmap_memmap();
-		efi_enabled = 0;
 	}
 #endif
 }

arch/x86/kernel/smpboot.c

@@ -66,6 +66,8 @@
 #include <asm/mwait.h>
 #include <asm/apic.h>
 #include <asm/io_apic.h>
+#include <asm/i387.h>
+#include <asm/fpu-internal.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
@@ -851,6 +853,9 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
+	/* the FPU context is blank, nobody can own it */
+	__cpu_disable_lazy_restore(cpu);
+
 	err = do_boot_cpu(apicid, cpu);
 	if (err) {
 		pr_debug("do_boot_cpu failed %d\n", err);

arch/x86/mm/fault.c

@@ -747,13 +747,15 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 				return;
 		}
 #endif
+		/* Kernel addresses are always protection faults: */
+		if (address >= TASK_SIZE)
+			error_code |= PF_PROT;
 
-		if (unlikely(show_unhandled_signals))
+		if (likely(show_unhandled_signals))
 			show_signal_msg(regs, error_code, address, tsk);
 
-		/* Kernel addresses are always protection faults: */
 		tsk->thread.cr2		= address;
-		tsk->thread.error_code	= error_code | (address >= TASK_SIZE);
+		tsk->thread.error_code	= error_code;
 		tsk->thread.trap_nr	= X86_TRAP_PF;
 
 		force_sig_info_fault(SIGSEGV, si_code, address, tsk, 0);

arch/x86/mm/init_64.c

@@ -821,6 +821,9 @@ int kern_addr_valid(unsigned long addr)
 	if (pud_none(*pud))
 		return 0;
 
+	if (pud_large(*pud))
+		return pfn_valid(pud_pfn(*pud));
+
 	pmd = pmd_offset(pud, addr);
 	if (pmd_none(*pmd))
 		return 0;

arch/x86/mm/numa.c

@@ -193,7 +193,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
 static void __init setup_node_data(int nid, u64 start, u64 end)
 {
 	const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
-	bool remapped = false;
 	u64 nd_pa;
 	void *nd;
 	int tnid;
@@ -205,37 +204,28 @@ static void __init setup_node_data(int nid, u64 start, u64 end)
 	if (end && (end - start) < NODE_MIN_SIZE)
 		return;
 
-	/* initialize remap allocator before aligning to ZONE_ALIGN */
-	init_alloc_remap(nid, start, end);
-
 	start = roundup(start, ZONE_ALIGN);
 
 	printk(KERN_INFO "Initmem setup node %d %016Lx-%016Lx\n",
 	       nid, start, end);
 
 	/*
-	 * Allocate node data.  Try remap allocator first, node-local
-	 * memory and then any node.  Never allocate in DMA zone.
+	 * Allocate node data.  Try node-local memory and then any node.
+	 * Never allocate in DMA zone.
 	 */
-	nd = alloc_remap(nid, nd_size);
-	if (nd) {
-		nd_pa = __pa(nd);
-		remapped = true;
-	} else {
-		nd_pa = memblock_alloc_nid(nd_size, SMP_CACHE_BYTES, nid);
-		if (!nd_pa) {
-			pr_err("Cannot find %zu bytes in node %d\n",
-			       nd_size, nid);
-			return;
-		}
-		nd = __va(nd_pa);
+	nd_pa = memblock_alloc_nid(nd_size, SMP_CACHE_BYTES, nid);
+	if (!nd_pa) {
+		pr_err("Cannot find %zu bytes in node %d\n",
+		       nd_size, nid);
+		return;
 	}
+	nd = __va(nd_pa);
 
 	/* report and initialize */
-	printk(KERN_INFO "  NODE_DATA [%016Lx - %016Lx]%s\n",
-	       nd_pa, nd_pa + nd_size - 1, remapped ? " (remapped)" : "");
+	printk(KERN_INFO "  NODE_DATA [mem %#010Lx-%#010Lx]\n",
+	       nd_pa, nd_pa + nd_size - 1);
 	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
-	if (!remapped && tnid != nid)
+	if (tnid != nid)
 		printk(KERN_INFO "    NODE_DATA(%d) on node %d\n", nid, tnid);
 
 	node_data[nid] = nd;

arch/x86/mm/numa_32.c

@@ -73,167 +73,6 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
 
 extern unsigned long highend_pfn, highstart_pfn;
 
-#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
-
-static void *node_remap_start_vaddr[MAX_NUMNODES];
-void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
-
-/*
- * Remap memory allocator
- */
-static unsigned long node_remap_start_pfn[MAX_NUMNODES];
-static void *node_remap_end_vaddr[MAX_NUMNODES];
-static void *node_remap_alloc_vaddr[MAX_NUMNODES];
-
-/**
- * alloc_remap - Allocate remapped memory
- * @nid: NUMA node to allocate memory from
- * @size: The size of allocation
- *
- * Allocate @size bytes from the remap area of NUMA node @nid.  The
- * size of the remap area is predetermined by init_alloc_remap() and
- * only the callers considered there should call this function.  For
- * more info, please read the comment on top of init_alloc_remap().
- *
- * The caller must be ready to handle allocation failure from this
- * function and fall back to regular memory allocator in such cases.
- *
- * CONTEXT:
- * Single CPU early boot context.
- *
- * RETURNS:
- * Pointer to the allocated memory on success, %NULL on failure.
- */
-void *alloc_remap(int nid, unsigned long size)
-{
-	void *allocation = node_remap_alloc_vaddr[nid];
-
-	size = ALIGN(size, L1_CACHE_BYTES);
-
-	if (!allocation || (allocation + size) > node_remap_end_vaddr[nid])
-		return NULL;
-
-	node_remap_alloc_vaddr[nid] += size;
-	memset(allocation, 0, size);
-
-	return allocation;
-}
-
-#ifdef CONFIG_HIBERNATION
-/**
- * resume_map_numa_kva - add KVA mapping to the temporary page tables created
- *                       during resume from hibernation
- * @pgd_base - temporary resume page directory
- */
-void resume_map_numa_kva(pgd_t *pgd_base)
-{
-	int node;
-
-	for_each_online_node(node) {
-		unsigned long start_va, start_pfn, nr_pages, pfn;
-
-		start_va = (unsigned long)node_remap_start_vaddr[node];
-		start_pfn = node_remap_start_pfn[node];
-		nr_pages = (node_remap_end_vaddr[node] -
-			    node_remap_start_vaddr[node]) >> PAGE_SHIFT;
-
-		printk(KERN_DEBUG "%s: node %d\n", __func__, node);
-
-		for (pfn = 0; pfn < nr_pages; pfn += PTRS_PER_PTE) {
-			unsigned long vaddr = start_va + (pfn << PAGE_SHIFT);
-			pgd_t *pgd = pgd_base + pgd_index(vaddr);
-			pud_t *pud = pud_offset(pgd, vaddr);
-			pmd_t *pmd = pmd_offset(pud, vaddr);
-
-			set_pmd(pmd, pfn_pmd(start_pfn + pfn,
-						PAGE_KERNEL_LARGE_EXEC));
-
-			printk(KERN_DEBUG "%s: %08lx -> pfn %08lx\n",
-				__func__, vaddr, start_pfn + pfn);
-		}
-	}
-}
-#endif
-
-/**
- * init_alloc_remap - Initialize remap allocator for a NUMA node
- * @nid: NUMA node to initizlie remap allocator for
- *
- * NUMA nodes may end up without any lowmem.  As allocating pgdat and
- * memmap on a different node with lowmem is inefficient, a special
- * remap allocator is implemented which can be used by alloc_remap().
- *
- * For each node, the amount of memory which will be necessary for
- * pgdat and memmap is calculated and two memory areas of the size are
- * allocated - one in the node and the other in lowmem; then, the area
- * in the node is remapped to the lowmem area.
- *
- * As pgdat and memmap must be allocated in lowmem anyway, this
- * doesn't waste lowmem address space; however, the actual lowmem
- * which gets remapped over is wasted.  The amount shouldn't be
- * problematic on machines this feature will be used.
- *
- * Initialization failure isn't fatal.  alloc_remap() is used
- * opportunistically and the callers will fall back to other memory
- * allocation mechanisms on failure.
- */
-void __init init_alloc_remap(int nid, u64 start, u64 end)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long end_pfn = end >> PAGE_SHIFT;
-	unsigned long size, pfn;
-	u64 node_pa, remap_pa;
-	void *remap_va;
-
-	/*
-	 * The acpi/srat node info can show hot-add memroy zones where
-	 * memory could be added but not currently present.
-	 */
-	printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
-	       nid, start_pfn, end_pfn);
-
-	/* calculate the necessary space aligned to large page size */
-	size = node_memmap_size_bytes(nid, start_pfn, end_pfn);
-	size += ALIGN(sizeof(pg_data_t), PAGE_SIZE);
-	size = ALIGN(size, LARGE_PAGE_BYTES);
-
-	/* allocate node memory and the lowmem remap area */
-	node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES);
-	if (!node_pa) {
-		pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n",
-			   size, nid);
-		return;
-	}
-	memblock_reserve(node_pa, size);
-
-	remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
-					  max_low_pfn << PAGE_SHIFT,
-					  size, LARGE_PAGE_BYTES);
-	if (!remap_pa) {
-		pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
-			   size, nid);
-		memblock_free(node_pa, size);
-		return;
-	}
-	memblock_reserve(remap_pa, size);
-	remap_va = phys_to_virt(remap_pa);
-
-	/* perform actual remap */
-	for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE)
-		set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT),
-			    (node_pa >> PAGE_SHIFT) + pfn,
-			    PAGE_KERNEL_LARGE);
-
-	/* initialize remap allocator parameters */
-	node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT;
-	node_remap_start_vaddr[nid] = remap_va;
-	node_remap_end_vaddr[nid] = remap_va + size;
-	node_remap_alloc_vaddr[nid] = remap_va;
-
-	printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n",
-	       nid, node_pa, node_pa + size, remap_va, remap_va + size);
-}
-
 void __init initmem_init(void)
 {
 	x86_numa_init();

arch/x86/mm/numa_internal.h

@@ -21,12 +21,6 @@ void __init numa_reset_distance(void);
 
 void __init x86_numa_init(void);
 
-#ifdef CONFIG_X86_64
-static inline void init_alloc_remap(int nid, u64 start, u64 end)	{ }
-#else
-void __init init_alloc_remap(int nid, u64 start, u64 end);
-#endif
-
 #ifdef CONFIG_NUMA_EMU
 void __init numa_emulation(struct numa_meminfo *numa_meminfo,
 			   int numa_dist_cnt);

arch/x86/platform/efi/efi.c

@@ -50,9 +50,6 @@
 
 #define EFI_DEBUG	1
 
-int efi_enabled;
-EXPORT_SYMBOL(efi_enabled);
-
 struct efi __read_mostly efi = {
 	.mps        = EFI_INVALID_TABLE_ADDR,
 	.acpi       = EFI_INVALID_TABLE_ADDR,
@@ -68,19 +65,28 @@ EXPORT_SYMBOL(efi);
 
 struct efi_memory_map memmap;
 
-bool efi_64bit;
-
 static struct efi efi_phys __initdata;
 static efi_system_table_t efi_systab __initdata;
 
 static inline bool efi_is_native(void)
 {
-	return IS_ENABLED(CONFIG_X86_64) == efi_64bit;
+	return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT);
 }
 
+unsigned long x86_efi_facility;
+
+/*
+ * Returns 1 if 'facility' is enabled, 0 otherwise.
+ */
+int efi_enabled(int facility)
+{
+	return test_bit(facility, &x86_efi_facility) != 0;
+}
+EXPORT_SYMBOL(efi_enabled);
+
 static int __init setup_noefi(char *arg)
 {
-	efi_enabled = 0;
+	clear_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
 	return 0;
 }
 early_param("noefi", setup_noefi);
@@ -425,6 +431,7 @@ void __init efi_reserve_boot_services(void)
 
 void __init efi_unmap_memmap(void)
 {
+	clear_bit(EFI_MEMMAP, &x86_efi_facility);
 	if (memmap.map) {
 		early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
 		memmap.map = NULL;
@@ -459,7 +466,7 @@ void __init efi_free_boot_services(void)
 
 static int __init efi_systab_init(void *phys)
 {
-	if (efi_64bit) {
+	if (efi_enabled(EFI_64BIT)) {
 		efi_system_table_64_t *systab64;
 		u64 tmp = 0;
 
@@ -551,7 +558,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
 	void *config_tables, *tablep;
 	int i, sz;
 
-	if (efi_64bit)
+	if (efi_enabled(EFI_64BIT))
 		sz = sizeof(efi_config_table_64_t);
 	else
 		sz = sizeof(efi_config_table_32_t);
@@ -571,7 +578,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
 		efi_guid_t guid;
 		unsigned long table;
 
-		if (efi_64bit) {
+		if (efi_enabled(EFI_64BIT)) {
 			u64 table64;
 			guid = ((efi_config_table_64_t *)tablep)->guid;
 			table64 = ((efi_config_table_64_t *)tablep)->table;
@@ -683,7 +690,6 @@ void __init efi_init(void)
 	if (boot_params.efi_info.efi_systab_hi ||
 	    boot_params.efi_info.efi_memmap_hi) {
 		pr_info("Table located above 4GB, disabling EFI.\n");
-		efi_enabled = 0;
 		return;
 	}
 	efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
@@ -693,10 +699,10 @@ void __init efi_init(void)
 			  ((__u64)boot_params.efi_info.efi_systab_hi<<32));
 #endif
 
-	if (efi_systab_init(efi_phys.systab)) {
-		efi_enabled = 0;
+	if (efi_systab_init(efi_phys.systab))
 		return;
-	}
+
+	set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility);
 
 	/*
 	 * Show what we know for posterity
@@ -714,10 +720,10 @@ void __init efi_init(void)
 		efi.systab->hdr.revision >> 16,
 		efi.systab->hdr.revision & 0xffff, vendor);
 
-	if (efi_config_init(efi.systab->tables, efi.systab->nr_tables)) {
-		efi_enabled = 0;
+	if (efi_config_init(efi.systab->tables, efi.systab->nr_tables))
 		return;
-	}
+
+	set_bit(EFI_CONFIG_TABLES, &x86_efi_facility);
 
 	/*
 	 * Note: We currently don't support runtime services on an EFI
@@ -726,15 +732,17 @@ void __init efi_init(void)
 
 	if (!efi_is_native())
 		pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
-	else if (efi_runtime_init()) {
-		efi_enabled = 0;
-		return;
+	else {
+		if (efi_runtime_init())
+			return;
+		set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
 	}
 
-	if (efi_memmap_init()) {
-		efi_enabled = 0;
+	if (efi_memmap_init())
 		return;
-	}
+
+	set_bit(EFI_MEMMAP, &x86_efi_facility);
+
 #ifdef CONFIG_X86_32
 	if (efi_is_native()) {
 		x86_platform.get_wallclock = efi_get_time;
@@ -900,7 +908,7 @@ void __init efi_enter_virtual_mode(void)
 	 *
 	 * Call EFI services through wrapper functions.
 	 */
-	efi.runtime_version = efi_systab.fw_revision;
+	efi.runtime_version = efi_systab.hdr.revision;
 	efi.get_time = virt_efi_get_time;
 	efi.set_time = virt_efi_set_time;
 	efi.get_wakeup_time = virt_efi_get_wakeup_time;
@@ -943,6 +951,9 @@ u64 efi_mem_attributes(unsigned long phys_addr)
 	efi_memory_desc_t *md;
 	void *p;
 
+	if (!efi_enabled(EFI_MEMMAP))
+		return 0;
+
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
 		md = p;
 		if ((md->phys_addr <= phys_addr) &&

arch/x86/platform/efi/efi_64.c

@@ -38,7 +38,7 @@
 #include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 
-static pgd_t save_pgd __initdata;
+static pgd_t *save_pgd __initdata;
 static unsigned long efi_flags __initdata;
 
 static void __init early_code_mapping_set_exec(int executable)
@@ -61,12 +61,20 @@ static void __init early_code_mapping_set_exec(int executable)
 void __init efi_call_phys_prelog(void)
 {
 	unsigned long vaddress;
+	int pgd;
+	int n_pgds;
 
 	early_code_mapping_set_exec(1);
 	local_irq_save(efi_flags);
-	vaddress = (unsigned long)__va(0x0UL);
-	save_pgd = *pgd_offset_k(0x0UL);
-	set_pgd(pgd_offset_k(0x0UL), *pgd_offset_k(vaddress));
+
+	n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
+	save_pgd = kmalloc(n_pgds * sizeof(pgd_t), GFP_KERNEL);
+
+	for (pgd = 0; pgd < n_pgds; pgd++) {
+		save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
+		vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
+		set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
+	}
 	__flush_tlb_all();
 }
 
@@ -75,7 +83,11 @@ void __init efi_call_phys_epilog(void)
 	/*
 	 * After the lock is released, the original page table is restored.
 	 */
-	set_pgd(pgd_offset_k(0x0UL), save_pgd);
+	int pgd;
+	int n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
+	for (pgd = 0; pgd < n_pgds; pgd++)
+		set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), save_pgd[pgd]);
+	kfree(save_pgd);
 	__flush_tlb_all();
 	local_irq_restore(efi_flags);
 	early_code_mapping_set_exec(0);

arch/x86/power/hibernate_32.c

@@ -129,8 +129,6 @@ static int resume_physical_mapping_init(pgd_t *pgd_base)
 		}
 	}
 
-	resume_map_numa_kva(pgd_base);
-
 	return 0;
 }
 

arch/x86/xen/spinlock.c

@@ -328,7 +328,6 @@ static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
 		if (per_cpu(lock_spinners, cpu) == xl) {
 			ADD_STATS(released_slow_kicked, 1);
 			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
-			break;
 		}
 	}
 }

arch/x86/xen/xen-asm_32.S

@@ -88,11 +88,11 @@ ENTRY(xen_iret)
 	 */
 #ifdef CONFIG_SMP
 	GET_THREAD_INFO(%eax)
-	movl TI_cpu(%eax), %eax
-	movl __per_cpu_offset(,%eax,4), %eax
-	mov xen_vcpu(%eax), %eax
+	movl %ss:TI_cpu(%eax), %eax
+	movl %ss:__per_cpu_offset(,%eax,4), %eax
+	mov %ss:xen_vcpu(%eax), %eax
 #else
-	movl xen_vcpu, %eax
+	movl %ss:xen_vcpu, %eax
 #endif
 
 	/* check IF state we're restoring */
@@ -105,11 +105,11 @@ ENTRY(xen_iret)
 	 * resuming the code, so we don't have to be worried about
 	 * being preempted to another CPU.
 	 */
-	setz XEN_vcpu_info_mask(%eax)
+	setz %ss:XEN_vcpu_info_mask(%eax)
 xen_iret_start_crit:
 
 	/* check for unmasked and pending */
-	cmpw $0x0001, XEN_vcpu_info_pending(%eax)
+	cmpw $0x0001, %ss:XEN_vcpu_info_pending(%eax)
 
 	/*
 	 * If there's something pending, mask events again so we can
@@ -117,7 +117,7 @@ xen_iret_start_crit:
 	 * touch XEN_vcpu_info_mask.
 	 */
 	jne 1f
-	movb $1, XEN_vcpu_info_mask(%eax)
+	movb $1, %ss:XEN_vcpu_info_mask(%eax)
 
 1:	popl %eax
 

drivers/acpi/battery.c

@@ -34,6 +34,7 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
@@ -95,6 +96,18 @@ enum {
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+	/* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+	   switches between mWh and mAh depending on whether the system
+	   is running on battery or not.  When mAh is the unit, most
+	   reported values are incorrect and need to be adjusted by
+	   10000/design_voltage.  Verified on x201, t410, t410s, and x220.
+	   Pre-2010 and 2012 models appear to always report in mWh and
+	   are thus unaffected (tested with t42, t61, t500, x200, x300,
+	   and x230).  Also, in mid-2012 Lenovo issued a BIOS update for
+	   the 2011 models that fixes the issue (tested on x220 with a
+	   post-1.29 BIOS), but as of Nov. 2012, no such update is
+	   available for the 2010 models.  */
+	ACPI_BATTERY_QUIRK_THINKPAD_MAH,
 };
 
 struct acpi_battery {
@@ -429,6 +442,21 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
 	kfree(buffer.pointer);
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
 		battery->full_charge_capacity = battery->design_capacity;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->design_capacity = battery->design_capacity *
+		    10000 / battery->design_voltage;
+		battery->full_charge_capacity = battery->full_charge_capacity *
+		    10000 / battery->design_voltage;
+		battery->design_capacity_warning =
+		    battery->design_capacity_warning *
+		    10000 / battery->design_voltage;
+		/* Curiously, design_capacity_low, unlike the rest of them,
+		   is correct.  */
+		/* capacity_granularity_* equal 1 on the systems tested, so
+		   it's impossible to tell if they would need an adjustment
+		   or not if their values were higher.  */
+	}
 	return result;
 }
 
@@ -477,6 +505,11 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->capacity_now = battery->capacity_now *
+		    10000 / battery->design_voltage;
+	}
 	return result;
 }
 
@@ -586,6 +619,24 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
 	mutex_unlock(&battery->sysfs_lock);
 }
 
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+	struct acpi_battery *battery = (struct acpi_battery *)private;
+	/* Note: the hardcoded offsets below have been extracted from
+	   the source code of dmidecode.  */
+	if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+		const u8 *dmi_data = (const u8 *)(dm + 1);
+		int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+		if (dm->length >= 18)
+			dmi_capacity *= dmi_data[17];
+		if (battery->design_capacity * battery->design_voltage / 1000
+		    != dmi_capacity &&
+		    battery->design_capacity * 10 == dmi_capacity)
+			set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				&battery->flags);
+	}
+}
+
 /*
  * According to the ACPI spec, some kinds of primary batteries can
  * report percentage battery remaining capacity directly to OS.
@@ -611,6 +662,32 @@ static void acpi_battery_quirks(struct acpi_battery *battery)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
 	}
+
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+		return ;
+
+	if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+		const char *s;
+		s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+		if (s && !strnicmp(s, "ThinkPad", 8)) {
+			dmi_walk(find_battery, battery);
+			if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				     &battery->flags) &&
+			    battery->design_voltage) {
+				battery->design_capacity =
+				    battery->design_capacity *
+				    10000 / battery->design_voltage;
+				battery->full_charge_capacity =
+				    battery->full_charge_capacity *
+				    10000 / battery->design_voltage;
+				battery->design_capacity_warning =
+				    battery->design_capacity_warning *
+				    10000 / battery->design_voltage;
+				battery->capacity_now = battery->capacity_now *
+				    10000 / battery->design_voltage;
+			}
+		}
+	}
 }
 
 static int acpi_battery_update(struct acpi_battery *battery)

drivers/acpi/osl.c

@@ -250,7 +250,7 @@ acpi_physical_address __init acpi_os_get_root_pointer(void)
 		return acpi_rsdp;
 #endif
 
-	if (efi_enabled) {
+	if (efi_enabled(EFI_CONFIG_TABLES)) {
 		if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
 			return efi.acpi20;
 		else if (efi.acpi != EFI_INVALID_TABLE_ADDR)

drivers/acpi/processor_driver.c

@@ -407,6 +407,7 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event)
 		acpi_bus_generate_proc_event(device, event, 0);
 		acpi_bus_generate_netlink_event(device->pnp.device_class,
 						  dev_name(&device->dev), event, 0);
+		break;
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Unsupported event [0x%x]\n", event));

drivers/acpi/processor_idle.c

@@ -1018,6 +1018,9 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr)
 		return -EINVAL;
 	}
 
+	if (!dev)
+		return -EINVAL;
+
 	dev->cpu = pr->id;
 
 	if (max_cstate == 0)
@@ -1205,6 +1208,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
 		}
 
 		/* Populate Updated C-state information */
+		acpi_processor_get_power_info(pr);
 		acpi_processor_setup_cpuidle_states(pr);
 
 		/* Enable all cpuidle devices */

drivers/acpi/scan.c

@@ -789,8 +789,8 @@ acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
 static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
 {
 	struct acpi_device_id button_device_ids[] = {
-		{"PNP0C0D", 0},
 		{"PNP0C0C", 0},
+		{"PNP0C0D", 0},
 		{"PNP0C0E", 0},
 		{"", 0},
 	};
@@ -802,6 +802,11 @@ static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
 	/* Power button, Lid switch always enable wakeup */
 	if (!acpi_match_device_ids(device, button_device_ids)) {
 		device->wakeup.flags.run_wake = 1;
+		if (!acpi_match_device_ids(device, &button_device_ids[1])) {
+			/* Do not use Lid/sleep button for S5 wakeup */
+			if (device->wakeup.sleep_state == ACPI_STATE_S5)
+				device->wakeup.sleep_state = ACPI_STATE_S4;
+		}
 		device_set_wakeup_capable(&device->dev, true);
 		return;
 	}
@@ -1157,7 +1162,7 @@ static void acpi_device_set_id(struct acpi_device *device)
 			acpi_add_id(device, ACPI_DOCK_HID);
 		else if (!acpi_ibm_smbus_match(device))
 			acpi_add_id(device, ACPI_SMBUS_IBM_HID);
-		else if (!acpi_device_hid(device) &&
+		else if (list_empty(&device->pnp.ids) &&
 			 ACPI_IS_ROOT_DEVICE(device->parent)) {
 			acpi_add_id(device, ACPI_BUS_HID); /* \_SB, LNXSYBUS */
 			strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);

drivers/acpi/sleep.c

@@ -138,6 +138,180 @@ void __init acpi_old_suspend_ordering(void)
 	old_suspend_ordering = true;
 }
 
+static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
+{
+	acpi_old_suspend_ordering();
+	return 0;
+}
+
+static int __init init_nvs_nosave(const struct dmi_system_id *d)
+{
+	acpi_nvs_nosave();
+	return 0;
+}
+
+static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Abit KN9 (nForce4 variant)",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
+		DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "HP xw4600 Workstation",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Panasonic CF51-2L",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR,
+				"Matsushita Electric Industrial Co.,Ltd."),
+		DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-FW21E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB17FX",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-SR11M",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Everex StepNote Series",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB1Z1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-NW130D",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCCW29FX",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Averatec AV1020-ED2",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus A8N-SLI DELUXE",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus A8N-SLI Premium",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-SR26GN_P",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB1S1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-FW520F",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Asus K54C",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Asus K54HR",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
+		},
+	},
+	{},
+};
+
+static void acpi_sleep_dmi_check(void)
+{
+	dmi_check_system(acpisleep_dmi_table);
+}
+
 /**
  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
  */
@@ -227,6 +401,7 @@ static void acpi_pm_end(void)
 }
 #else /* !CONFIG_ACPI_SLEEP */
 #define acpi_target_sleep_state	ACPI_STATE_S0
+static inline void acpi_sleep_dmi_check(void) {}
 #endif /* CONFIG_ACPI_SLEEP */
 
 #ifdef CONFIG_SUSPEND
@@ -371,167 +546,6 @@ static const struct platform_suspend_ops acpi_suspend_ops_old = {
 	.end = acpi_pm_end,
 	.recover = acpi_pm_finish,
 };
-
-static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
-{
-	old_suspend_ordering = true;
-	return 0;
-}
-
-static int __init init_nvs_nosave(const struct dmi_system_id *d)
-{
-	acpi_nvs_nosave();
-	return 0;
-}
-
-static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Abit KN9 (nForce4 variant)",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
-		DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "HP xw4600 Workstation",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
-		DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Panasonic CF51-2L",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR,
-				"Matsushita Electric Industrial Co.,Ltd."),
-		DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-FW21E",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VPCEB17FX",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-SR11M",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Everex StepNote Series",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VPCEB1Z1E",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-NW130D",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VPCCW29FX",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Averatec AV1020-ED2",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Asus A8N-SLI DELUXE",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Asus A8N-SLI Premium",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-SR26GN_P",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-FW520F",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Asus K54C",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Asus K54HR",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
-		},
-	},
-	{},
-};
 #endif /* CONFIG_SUSPEND */
 
 #ifdef CONFIG_HIBERNATION
@@ -872,13 +886,13 @@ int __init acpi_sleep_init(void)
 	u8 type_a, type_b;
 #ifdef CONFIG_SUSPEND
 	int i = 0;
-
-	dmi_check_system(acpisleep_dmi_table);
 #endif
 
 	if (acpi_disabled)
 		return 0;
 
+	acpi_sleep_dmi_check();
+
 	sleep_states[ACPI_STATE_S0] = 1;
 	printk(KERN_INFO PREFIX "(supports S0");
 

drivers/acpi/video.c

@@ -389,6 +389,12 @@ static int __init video_set_bqc_offset(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int video_ignore_initial_backlight(const struct dmi_system_id *d)
+{
+	use_bios_initial_backlight = 0;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -433,6 +439,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Folio 13-2000",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
+		},
+	},
 	{}
 };
 

drivers/ata/ahci.c

@@ -53,6 +53,7 @@
 
 enum {
 	AHCI_PCI_BAR_STA2X11	= 0,
+	AHCI_PCI_BAR_ENMOTUS	= 2,
 	AHCI_PCI_BAR_STANDARD	= 5,
 };
 
@@ -405,7 +406,13 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
 
 	/* Asmedia */
-	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1061 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci },	/* ASM1060 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci },	/* ASM1060 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci },	/* ASM1061 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1062 */
+
+	/* Enmotus */
+	{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
 
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -1079,9 +1086,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_info(&pdev->dev,
 			 "PDC42819 can only drive SATA devices with this driver\n");
 
-	/* The Connext uses non-standard BAR */
+	/* Both Connext and Enmotus devices use non-standard BARs */
 	if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
 		ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
+	else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
+		ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
 
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);

drivers/ata/libata-core.c

@@ -2536,6 +2536,7 @@ int ata_bus_probe(struct ata_port *ap)
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't

drivers/ata/libata-eh.c

@@ -2600,6 +2600,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't

drivers/ata/libata-scsi.c

@@ -309,7 +309,8 @@ ata_scsi_activity_show(struct device *dev, struct device_attribute *attr,
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
 
-	if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY))
+	if (atadev && ap->ops->sw_activity_show &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY))
 		return ap->ops->sw_activity_show(atadev, buf);
 	return -EINVAL;
 }
@@ -324,7 +325,8 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
 	enum sw_activity val;
 	int rc;
 
-	if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
+	if (atadev && ap->ops->sw_activity_store &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
 		val = simple_strtoul(buf, NULL, 0);
 		switch (val) {
 		case OFF: case BLINK_ON: case BLINK_OFF:

drivers/ata/sata_promise.c

@@ -147,6 +147,10 @@ struct pdc_port_priv {
 	dma_addr_t		pkt_dma;
 };
 
+struct pdc_host_priv {
+	spinlock_t hard_reset_lock;
+};
+
 static int pdc_sata_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int pdc_sata_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -801,9 +805,10 @@ static void pdc_hard_reset_port(struct ata_port *ap)
 	void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
 	void __iomem *pcictl_b1_mmio = host_mmio + PDC_PCI_CTL + 1;
 	unsigned int ata_no = pdc_ata_port_to_ata_no(ap);
+	struct pdc_host_priv *hpriv = ap->host->private_data;
 	u8 tmp;
 
-	spin_lock(&ap->host->lock);
+	spin_lock(&hpriv->hard_reset_lock);
 
 	tmp = readb(pcictl_b1_mmio);
 	tmp &= ~(0x10 << ata_no);
@@ -814,7 +819,7 @@ static void pdc_hard_reset_port(struct ata_port *ap)
 	writeb(tmp, pcictl_b1_mmio);
 	readb(pcictl_b1_mmio); /* flush */
 
-	spin_unlock(&ap->host->lock);
+	spin_unlock(&hpriv->hard_reset_lock);
 }
 
 static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
@@ -1182,6 +1187,7 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
 	const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
 	const struct ata_port_info *ppi[PDC_MAX_PORTS];
 	struct ata_host *host;
+	struct pdc_host_priv *hpriv;
 	void __iomem *host_mmio;
 	int n_ports, i, rc;
 	int is_sataii_tx4;
@@ -1218,6 +1224,11 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
 		dev_err(&pdev->dev, "failed to allocate host\n");
 		return -ENOMEM;
 	}
+	hpriv = devm_kzalloc(&pdev->dev, sizeof *hpriv, GFP_KERNEL);
+	if (!hpriv)
+		return -ENOMEM;
+	spin_lock_init(&hpriv->hard_reset_lock);
+	host->private_data = hpriv;
 	host->iomap = pcim_iomap_table(pdev);
 
 	is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags);

drivers/atm/iphase.h

@@ -636,82 +636,82 @@ struct rx_buf_desc {
 #define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE  
 #define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE  
 
-typedef volatile u_int  freg_t;
+typedef volatile u_int	ffreg_t;
 typedef u_int   rreg_t;
 
 typedef struct _ffredn_t {
-        freg_t  idlehead_high;  /* Idle cell header (high)              */
-        freg_t  idlehead_low;   /* Idle cell header (low)               */
-        freg_t  maxrate;        /* Maximum rate                         */
-        freg_t  stparms;        /* Traffic Management Parameters        */
-        freg_t  abrubr_abr;     /* ABRUBR Priority Byte 1, TCR Byte 0   */
-        freg_t  rm_type;        /*                                      */
-        u_int   filler5[0x17 - 0x06];
-        freg_t  cmd_reg;        /* Command register                     */
-        u_int   filler18[0x20 - 0x18];
-        freg_t  cbr_base;       /* CBR Pointer Base                     */
-        freg_t  vbr_base;       /* VBR Pointer Base                     */
-        freg_t  abr_base;       /* ABR Pointer Base                     */
-        freg_t  ubr_base;       /* UBR Pointer Base                     */
-        u_int   filler24;
-        freg_t  vbrwq_base;     /* VBR Wait Queue Base                  */
-        freg_t  abrwq_base;     /* ABR Wait Queue Base                  */
-        freg_t  ubrwq_base;     /* UBR Wait Queue Base                  */
-        freg_t  vct_base;       /* Main VC Table Base                   */
-        freg_t  vcte_base;      /* Extended Main VC Table Base          */
-        u_int   filler2a[0x2C - 0x2A];
-        freg_t  cbr_tab_beg;    /* CBR Table Begin                      */
-        freg_t  cbr_tab_end;    /* CBR Table End                        */
-        freg_t  cbr_pointer;    /* CBR Pointer                          */
-        u_int   filler2f[0x30 - 0x2F];
-        freg_t  prq_st_adr;     /* Packet Ready Queue Start Address     */
-        freg_t  prq_ed_adr;     /* Packet Ready Queue End Address       */
-        freg_t  prq_rd_ptr;     /* Packet Ready Queue read pointer      */
-        freg_t  prq_wr_ptr;     /* Packet Ready Queue write pointer     */
-        freg_t  tcq_st_adr;     /* Transmit Complete Queue Start Address*/
-        freg_t  tcq_ed_adr;     /* Transmit Complete Queue End Address  */
-        freg_t  tcq_rd_ptr;     /* Transmit Complete Queue read pointer */
-        freg_t  tcq_wr_ptr;     /* Transmit Complete Queue write pointer*/
-        u_int   filler38[0x40 - 0x38];
-        freg_t  queue_base;     /* Base address for PRQ and TCQ         */
-        freg_t  desc_base;      /* Base address of descriptor table     */
-        u_int   filler42[0x45 - 0x42];
-        freg_t  mode_reg_0;     /* Mode register 0                      */
-        freg_t  mode_reg_1;     /* Mode register 1                      */
-        freg_t  intr_status_reg;/* Interrupt Status register            */
-        freg_t  mask_reg;       /* Mask Register                        */
-        freg_t  cell_ctr_high1; /* Total cell transfer count (high)     */
-        freg_t  cell_ctr_lo1;   /* Total cell transfer count (low)      */
-        freg_t  state_reg;      /* Status register                      */
-        u_int   filler4c[0x58 - 0x4c];
-        freg_t  curr_desc_num;  /* Contains the current descriptor num  */
-        freg_t  next_desc;      /* Next descriptor                      */
-        freg_t  next_vc;        /* Next VC                              */
-        u_int   filler5b[0x5d - 0x5b];
-        freg_t  present_slot_cnt;/* Present slot count                  */
-        u_int   filler5e[0x6a - 0x5e];
-        freg_t  new_desc_num;   /* New descriptor number                */
-        freg_t  new_vc;         /* New VC                               */
-        freg_t  sched_tbl_ptr;  /* Schedule table pointer               */
-        freg_t  vbrwq_wptr;     /* VBR wait queue write pointer         */
-        freg_t  vbrwq_rptr;     /* VBR wait queue read pointer          */
-        freg_t  abrwq_wptr;     /* ABR wait queue write pointer         */
-        freg_t  abrwq_rptr;     /* ABR wait queue read pointer          */
-        freg_t  ubrwq_wptr;     /* UBR wait queue write pointer         */
-        freg_t  ubrwq_rptr;     /* UBR wait queue read pointer          */
-        freg_t  cbr_vc;         /* CBR VC                               */
-        freg_t  vbr_sb_vc;      /* VBR SB VC                            */
-        freg_t  abr_sb_vc;      /* ABR SB VC                            */
-        freg_t  ubr_sb_vc;      /* UBR SB VC                            */
-        freg_t  vbr_next_link;  /* VBR next link                        */
-        freg_t  abr_next_link;  /* ABR next link                        */
-        freg_t  ubr_next_link;  /* UBR next link                        */
-        u_int   filler7a[0x7c-0x7a];
-        freg_t  out_rate_head;  /* Out of rate head                     */
-        u_int   filler7d[0xca-0x7d]; /* pad out to full address space   */
-        freg_t  cell_ctr_high1_nc;/* Total cell transfer count (high)   */
-        freg_t  cell_ctr_lo1_nc;/* Total cell transfer count (low)      */
-        u_int   fillercc[0x100-0xcc]; /* pad out to full address space   */
+	ffreg_t	idlehead_high;	/* Idle cell header (high)		*/
+	ffreg_t	idlehead_low;	/* Idle cell header (low)		*/
+	ffreg_t	maxrate;	/* Maximum rate				*/
+	ffreg_t	stparms;	/* Traffic Management Parameters	*/
+	ffreg_t	abrubr_abr;	/* ABRUBR Priority Byte 1, TCR Byte 0	*/
+	ffreg_t	rm_type;	/*					*/
+	u_int	filler5[0x17 - 0x06];
+	ffreg_t	cmd_reg;	/* Command register			*/
+	u_int	filler18[0x20 - 0x18];
+	ffreg_t	cbr_base;	/* CBR Pointer Base			*/
+	ffreg_t	vbr_base;	/* VBR Pointer Base			*/
+	ffreg_t	abr_base;	/* ABR Pointer Base			*/
+	ffreg_t	ubr_base;	/* UBR Pointer Base			*/
+	u_int	filler24;
+	ffreg_t	vbrwq_base;	/* VBR Wait Queue Base			*/
+	ffreg_t	abrwq_base;	/* ABR Wait Queue Base			*/
+	ffreg_t	ubrwq_base;	/* UBR Wait Queue Base			*/
+	ffreg_t	vct_base;	/* Main VC Table Base			*/
+	ffreg_t	vcte_base;	/* Extended Main VC Table Base		*/
+	u_int	filler2a[0x2C - 0x2A];
+	ffreg_t	cbr_tab_beg;	/* CBR Table Begin			*/
+	ffreg_t	cbr_tab_end;	/* CBR Table End			*/
+	ffreg_t	cbr_pointer;	/* CBR Pointer				*/
+	u_int	filler2f[0x30 - 0x2F];
+	ffreg_t	prq_st_adr;	/* Packet Ready Queue Start Address	*/
+	ffreg_t	prq_ed_adr;	/* Packet Ready Queue End Address	*/
+	ffreg_t	prq_rd_ptr;	/* Packet Ready Queue read pointer	*/
+	ffreg_t	prq_wr_ptr;	/* Packet Ready Queue write pointer	*/
+	ffreg_t	tcq_st_adr;	/* Transmit Complete Queue Start Address*/
+	ffreg_t	tcq_ed_adr;	/* Transmit Complete Queue End Address	*/
+	ffreg_t	tcq_rd_ptr;	/* Transmit Complete Queue read pointer */
+	ffreg_t	tcq_wr_ptr;	/* Transmit Complete Queue write pointer*/
+	u_int	filler38[0x40 - 0x38];
+	ffreg_t	queue_base;	/* Base address for PRQ and TCQ		*/
+	ffreg_t	desc_base;	/* Base address of descriptor table	*/
+	u_int	filler42[0x45 - 0x42];
+	ffreg_t	mode_reg_0;	/* Mode register 0			*/
+	ffreg_t	mode_reg_1;	/* Mode register 1			*/
+	ffreg_t	intr_status_reg;/* Interrupt Status register		*/
+	ffreg_t	mask_reg;	/* Mask Register			*/
+	ffreg_t	cell_ctr_high1; /* Total cell transfer count (high)	*/
+	ffreg_t	cell_ctr_lo1;	/* Total cell transfer count (low)	*/
+	ffreg_t	state_reg;	/* Status register			*/
+	u_int	filler4c[0x58 - 0x4c];
+	ffreg_t	curr_desc_num;	/* Contains the current descriptor num	*/
+	ffreg_t	next_desc;	/* Next descriptor			*/
+	ffreg_t	next_vc;	/* Next VC				*/
+	u_int	filler5b[0x5d - 0x5b];
+	ffreg_t	present_slot_cnt;/* Present slot count			*/
+	u_int	filler5e[0x6a - 0x5e];
+	ffreg_t	new_desc_num;	/* New descriptor number		*/
+	ffreg_t	new_vc;		/* New VC				*/
+	ffreg_t	sched_tbl_ptr;	/* Schedule table pointer		*/
+	ffreg_t	vbrwq_wptr;	/* VBR wait queue write pointer		*/
+	ffreg_t	vbrwq_rptr;	/* VBR wait queue read pointer		*/
+	ffreg_t	abrwq_wptr;	/* ABR wait queue write pointer		*/
+	ffreg_t	abrwq_rptr;	/* ABR wait queue read pointer		*/
+	ffreg_t	ubrwq_wptr;	/* UBR wait queue write pointer		*/
+	ffreg_t	ubrwq_rptr;	/* UBR wait queue read pointer		*/
+	ffreg_t	cbr_vc;		/* CBR VC				*/
+	ffreg_t	vbr_sb_vc;	/* VBR SB VC				*/
+	ffreg_t	abr_sb_vc;	/* ABR SB VC				*/
+	ffreg_t	ubr_sb_vc;	/* UBR SB VC				*/
+	ffreg_t	vbr_next_link;	/* VBR next link			*/
+	ffreg_t	abr_next_link;	/* ABR next link			*/
+	ffreg_t	ubr_next_link;	/* UBR next link			*/
+	u_int	filler7a[0x7c-0x7a];
+	ffreg_t	out_rate_head;	/* Out of rate head			*/
+	u_int	filler7d[0xca-0x7d]; /* pad out to full address space	*/
+	ffreg_t	cell_ctr_high1_nc;/* Total cell transfer count (high)	*/
+	ffreg_t	cell_ctr_lo1_nc;/* Total cell transfer count (low)	*/
+	u_int	fillercc[0x100-0xcc]; /* pad out to full address space	 */
 } ffredn_t;
 
 typedef struct _rfredn_t {

drivers/atm/solos-pci.c

@@ -967,10 +967,11 @@ static uint32_t fpga_tx(struct solos_card *card)
 	for (port = 0; tx_pending; tx_pending >>= 1, port++) {
 		if (tx_pending & 1) {
 			struct sk_buff *oldskb = card->tx_skb[port];
-			if (oldskb)
+			if (oldskb) {
 				pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr,
 						 oldskb->len, PCI_DMA_TODEVICE);
-
+				card->tx_skb[port] = NULL;
+			}
 			spin_lock(&card->tx_queue_lock);
 			skb = skb_dequeue(&card->tx_queue[port]);
 			if (!skb)

drivers/base/bus.c

@@ -294,7 +294,7 @@ int bus_for_each_dev(struct bus_type *bus, struct device *start,
 	struct device *dev;
 	int error = 0;
 
-	if (!bus)
+	if (!bus || !bus->p)
 		return -EINVAL;
 
 	klist_iter_init_node(&bus->p->klist_devices, &i,
@@ -328,7 +328,7 @@ struct device *bus_find_device(struct bus_type *bus,
 	struct klist_iter i;
 	struct device *dev;
 
-	if (!bus)
+	if (!bus || !bus->p)
 		return NULL;
 
 	klist_iter_init_node(&bus->p->klist_devices, &i,

drivers/base/dd.c

@@ -160,6 +160,8 @@ static int deferred_probe_initcall(void)
 
 	driver_deferred_probe_enable = true;
 	driver_deferred_probe_trigger();
+	/* Sort as many dependencies as possible before exiting initcalls */
+	flush_workqueue(deferred_wq);
 	return 0;
 }
 late_initcall(deferred_probe_initcall);

drivers/base/regmap/regmap-debugfs.c

@@ -90,7 +90,7 @@ static ssize_t regmap_map_read_file(struct file *file, char __user *user_buf,
 		/* If we're in the region the user is trying to read */
 		if (p >= *ppos) {
 			/* ...but not beyond it */
-			if (buf_pos >= count - 1 - tot_len)
+			if (buf_pos + 1 + tot_len >= count)
 				break;
 
 			/* Format the register */

drivers/bcma/driver_mips.c

@@ -115,7 +115,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
 			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
 			    ~(1 << irqflag));
 	else
-		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
 
 	/* assign the new one */
 	if (irq == 0) {

drivers/block/aoe/aoe.h

@@ -1,5 +1,5 @@
 /* Copyright (c) 2007 Coraid, Inc.  See COPYING for GPL terms. */
-#define VERSION "47"
+#define VERSION "47q"
 #define AOE_MAJOR 152
 #define DEVICE_NAME "aoe"
 

drivers/block/aoe/aoeblk.c

@@ -276,8 +276,6 @@ aoeblk_gdalloc(void *vp)
 		goto err_mempool;
 	blk_queue_make_request(d->blkq, aoeblk_make_request);
 	d->blkq->backing_dev_info.name = "aoe";
-	if (bdi_init(&d->blkq->backing_dev_info))
-		goto err_blkq;
 	spin_lock_irqsave(&d->lock, flags);
 	gd->major = AOE_MAJOR;
 	gd->first_minor = d->sysminor * AOE_PARTITIONS;
@@ -298,9 +296,6 @@ aoeblk_gdalloc(void *vp)
 	aoedisk_add_sysfs(d);
 	return;
 
-err_blkq:
-	blk_cleanup_queue(d->blkq);
-	d->blkq = NULL;
 err_mempool:
 	mempool_destroy(d->bufpool);
 err_disk:

drivers/block/drbd/drbd_req.c

@@ -37,6 +37,7 @@ static void _drbd_start_io_acct(struct drbd_conf *mdev, struct drbd_request *req
 	const int rw = bio_data_dir(bio);
 	int cpu;
 	cpu = part_stat_lock();
+	part_round_stats(cpu, &mdev->vdisk->part0);
 	part_stat_inc(cpu, &mdev->vdisk->part0, ios[rw]);
 	part_stat_add(cpu, &mdev->vdisk->part0, sectors[rw], bio_sectors(bio));
 	part_inc_in_flight(&mdev->vdisk->part0, rw);

drivers/block/rbd.c

@@ -71,7 +71,7 @@
 #define DEV_NAME_LEN		32
 #define MAX_INT_FORMAT_WIDTH	((5 * sizeof (int)) / 2 + 1)
 
-#define RBD_NOTIFY_TIMEOUT_DEFAULT 10
+#define RBD_READ_ONLY_DEFAULT		false
 
 /*
  * block device image metadata (in-memory version)
@@ -94,7 +94,7 @@ struct rbd_image_header {
 };
 
 struct rbd_options {
-	int	notify_timeout;
+	bool	read_only;
 };
 
 /*
@@ -174,9 +174,13 @@ struct rbd_device {
 
 	/* protects updating the header */
 	struct rw_semaphore     header_rwsem;
+	/* name of the snapshot this device reads from */
 	char                    snap_name[RBD_MAX_SNAP_NAME_LEN];
+	/* id of the snapshot this device reads from */
 	u64                     snap_id;	/* current snapshot id */
-	int read_only;
+	/* whether the snap_id this device reads from still exists */
+	bool                    snap_exists;
+	bool			read_only;
 
 	struct list_head	node;
 
@@ -185,6 +189,7 @@ struct rbd_device {
 
 	/* sysfs related */
 	struct device		dev;
+	unsigned long		open_count;
 };
 
 static DEFINE_MUTEX(ctl_mutex);	  /* Serialize open/close/setup/teardown */
@@ -197,10 +202,6 @@ static DEFINE_SPINLOCK(rbd_client_list_lock);
 
 static int __rbd_init_snaps_header(struct rbd_device *rbd_dev);
 static void rbd_dev_release(struct device *dev);
-static ssize_t rbd_snap_add(struct device *dev,
-			    struct device_attribute *attr,
-			    const char *buf,
-			    size_t count);
 static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
 				  struct rbd_snap *snap);
 
@@ -246,13 +247,15 @@ static int rbd_open(struct block_device *bdev, fmode_t mode)
 {
 	struct rbd_device *rbd_dev = bdev->bd_disk->private_data;
 
-	rbd_get_dev(rbd_dev);
-
-	set_device_ro(bdev, rbd_dev->read_only);
-
 	if ((mode & FMODE_WRITE) && rbd_dev->read_only)
 		return -EROFS;
 
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+	rbd_get_dev(rbd_dev);
+	set_device_ro(bdev, rbd_dev->read_only);
+	rbd_dev->open_count++;
+	mutex_unlock(&ctl_mutex);
+
 	return 0;
 }
 
@@ -260,7 +263,11 @@ static int rbd_release(struct gendisk *disk, fmode_t mode)
 {
 	struct rbd_device *rbd_dev = disk->private_data;
 
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+	BUG_ON(!rbd_dev->open_count);
+	rbd_dev->open_count--;
 	rbd_put_dev(rbd_dev);
+	mutex_unlock(&ctl_mutex);
 
 	return 0;
 }
@@ -342,17 +349,24 @@ static struct rbd_client *__rbd_client_find(struct ceph_options *opt)
  * mount options
  */
 enum {
-	Opt_notify_timeout,
 	Opt_last_int,
 	/* int args above */
 	Opt_last_string,
 	/* string args above */
+	Opt_read_only,
+	Opt_read_write,
+	/* Boolean args above */
+	Opt_last_bool,
 };
 
 static match_table_t rbdopt_tokens = {
-	{Opt_notify_timeout, "notify_timeout=%d"},
 	/* int args above */
 	/* string args above */
+	{Opt_read_only, "read_only"},
+	{Opt_read_only, "ro"},		/* Alternate spelling */
+	{Opt_read_write, "read_write"},
+	{Opt_read_write, "rw"},		/* Alternate spelling */
+	/* Boolean args above */
 	{-1, NULL}
 };
 
@@ -377,13 +391,18 @@ static int parse_rbd_opts_token(char *c, void *private)
 	} else if (token > Opt_last_int && token < Opt_last_string) {
 		dout("got string token %d val %s\n", token,
 		     argstr[0].from);
+	} else if (token > Opt_last_string && token < Opt_last_bool) {
+		dout("got Boolean token %d\n", token);
 	} else {
 		dout("got token %d\n", token);
 	}
 
 	switch (token) {
-	case Opt_notify_timeout:
-		rbdopt->notify_timeout = intval;
+	case Opt_read_only:
+		rbdopt->read_only = true;
+		break;
+	case Opt_read_write:
+		rbdopt->read_only = false;
 		break;
 	default:
 		BUG_ON(token);
@@ -407,7 +426,7 @@ static struct rbd_client *rbd_get_client(const char *mon_addr,
 	if (!rbd_opts)
 		return ERR_PTR(-ENOMEM);
 
-	rbd_opts->notify_timeout = RBD_NOTIFY_TIMEOUT_DEFAULT;
+	rbd_opts->read_only = RBD_READ_ONLY_DEFAULT;
 
 	opt = ceph_parse_options(options, mon_addr,
 				mon_addr + mon_addr_len,
@@ -590,7 +609,8 @@ static int rbd_header_set_snap(struct rbd_device *dev, u64 *size)
 		else
 			snapc->seq = 0;
 		dev->snap_id = CEPH_NOSNAP;
-		dev->read_only = 0;
+		dev->snap_exists = false;
+		dev->read_only = dev->rbd_client->rbd_opts->read_only;
 		if (size)
 			*size = header->image_size;
 	} else {
@@ -598,7 +618,8 @@ static int rbd_header_set_snap(struct rbd_device *dev, u64 *size)
 		if (ret < 0)
 			goto done;
 		dev->snap_id = snapc->seq;
-		dev->read_only = 1;
+		dev->snap_exists = true;
+		dev->read_only = true;	/* No choice for snapshots */
 	}
 
 	ret = 0;
@@ -609,7 +630,7 @@ done:
 
 static void rbd_header_free(struct rbd_image_header *header)
 {
-	kfree(header->snapc);
+	ceph_put_snap_context(header->snapc);
 	kfree(header->snap_names);
 	kfree(header->snap_sizes);
 }
@@ -887,13 +908,10 @@ static int rbd_do_request(struct request *rq,
 
 	dout("rbd_do_request obj=%s ofs=%lld len=%lld\n", obj, len, ofs);
 
-	down_read(&dev->header_rwsem);
-
 	osdc = &dev->rbd_client->client->osdc;
 	req = ceph_osdc_alloc_request(osdc, flags, snapc, ops,
 					false, GFP_NOIO, pages, bio);
 	if (!req) {
-		up_read(&dev->header_rwsem);
 		ret = -ENOMEM;
 		goto done_pages;
 	}
@@ -920,15 +938,15 @@ static int rbd_do_request(struct request *rq,
 	layout->fl_object_size = cpu_to_le32(1 << RBD_MAX_OBJ_ORDER);
 	layout->fl_pg_preferred = cpu_to_le32(-1);
 	layout->fl_pg_pool = cpu_to_le32(dev->poolid);
-	ceph_calc_raw_layout(osdc, layout, snapid, ofs, &len, &bno,
-				req, ops);
+	ret = ceph_calc_raw_layout(osdc, layout, snapid, ofs, &len, &bno,
+				   req, ops);
+	BUG_ON(ret != 0);
 
 	ceph_osdc_build_request(req, ofs, &len,
 				ops,
 				snapc,
 				&mtime,
 				req->r_oid, req->r_oid_len);
-	up_read(&dev->header_rwsem);
 
 	if (linger_req) {
 		ceph_osdc_set_request_linger(osdc, req);
@@ -1193,7 +1211,7 @@ static int rbd_req_sync_notify_ack(struct rbd_device *dev,
 	if (ret < 0)
 		return ret;
 
-	ops[0].watch.ver = cpu_to_le64(dev->header.obj_version);
+	ops[0].watch.ver = cpu_to_le64(ver);
 	ops[0].watch.cookie = notify_id;
 	ops[0].watch.flag = 0;
 
@@ -1213,6 +1231,7 @@ static int rbd_req_sync_notify_ack(struct rbd_device *dev,
 static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data)
 {
 	struct rbd_device *dev = (struct rbd_device *)data;
+	u64 hver;
 	int rc;
 
 	if (!dev)
@@ -1222,12 +1241,13 @@ static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data)
 		notify_id, (int)opcode);
 	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
 	rc = __rbd_update_snaps(dev);
+	hver = dev->header.obj_version;
 	mutex_unlock(&ctl_mutex);
 	if (rc)
 		pr_warning(RBD_DRV_NAME "%d got notification but failed to "
 			   " update snaps: %d\n", dev->major, rc);
 
-	rbd_req_sync_notify_ack(dev, ver, notify_id, dev->obj_md_name);
+	rbd_req_sync_notify_ack(dev, hver, notify_id, dev->obj_md_name);
 }
 
 /*
@@ -1304,71 +1324,7 @@ static int rbd_req_sync_unwatch(struct rbd_device *dev,
 	return ret;
 }
 
-struct rbd_notify_info {
-	struct rbd_device *dev;
-};
-
-static void rbd_notify_cb(u64 ver, u64 notify_id, u8 opcode, void *data)
-{
-	struct rbd_device *dev = (struct rbd_device *)data;
-	if (!dev)
-		return;
-
-	dout("rbd_notify_cb %s notify_id=%lld opcode=%d\n", dev->obj_md_name,
-		notify_id, (int)opcode);
-}
-
-/*
- * Request sync osd notify
- */
-static int rbd_req_sync_notify(struct rbd_device *dev,
-		          const char *obj)
-{
-	struct ceph_osd_req_op *ops;
-	struct ceph_osd_client *osdc = &dev->rbd_client->client->osdc;
-	struct ceph_osd_event *event;
-	struct rbd_notify_info info;
-	int payload_len = sizeof(u32) + sizeof(u32);
-	int ret;
-
-	ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_NOTIFY, payload_len);
-	if (ret < 0)
-		return ret;
-
-	info.dev = dev;
-
-	ret = ceph_osdc_create_event(osdc, rbd_notify_cb, 1,
-				     (void *)&info, &event);
-	if (ret < 0)
-		goto fail;
-
-	ops[0].watch.ver = 1;
-	ops[0].watch.flag = 1;
-	ops[0].watch.cookie = event->cookie;
-	ops[0].watch.prot_ver = RADOS_NOTIFY_VER;
-	ops[0].watch.timeout = 12;
-
-	ret = rbd_req_sync_op(dev, NULL,
-			       CEPH_NOSNAP,
-			       0,
-			       CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
-			       ops,
-			       1, obj, 0, 0, NULL, NULL, NULL);
-	if (ret < 0)
-		goto fail_event;
-
-	ret = ceph_osdc_wait_event(event, CEPH_OSD_TIMEOUT_DEFAULT);
-	dout("ceph_osdc_wait_event returned %d\n", ret);
-	rbd_destroy_ops(ops);
-	return 0;
-
-fail_event:
-	ceph_osdc_cancel_event(event);
-fail:
-	rbd_destroy_ops(ops);
-	return ret;
-}
-
+#if 0
 /*
  * Request sync osd read
  */
@@ -1408,6 +1364,7 @@ static int rbd_req_sync_exec(struct rbd_device *dev,
 	dout("cls_exec returned %d\n", ret);
 	return ret;
 }
+#endif
 
 static struct rbd_req_coll *rbd_alloc_coll(int num_reqs)
 {
@@ -1440,6 +1397,7 @@ static void rbd_rq_fn(struct request_queue *q)
 		u64 ofs;
 		int num_segs, cur_seg = 0;
 		struct rbd_req_coll *coll;
+		struct ceph_snap_context *snapc;
 
 		/* peek at request from block layer */
 		if (!rq)
@@ -1466,6 +1424,20 @@ static void rbd_rq_fn(struct request_queue *q)
 
 		spin_unlock_irq(q->queue_lock);
 
+		down_read(&rbd_dev->header_rwsem);
+
+		if (rbd_dev->snap_id != CEPH_NOSNAP && !rbd_dev->snap_exists) {
+			up_read(&rbd_dev->header_rwsem);
+			dout("request for non-existent snapshot");
+			spin_lock_irq(q->queue_lock);
+			__blk_end_request_all(rq, -ENXIO);
+			continue;
+		}
+
+		snapc = ceph_get_snap_context(rbd_dev->header.snapc);
+
+		up_read(&rbd_dev->header_rwsem);
+
 		dout("%s 0x%x bytes at 0x%llx\n",
 		     do_write ? "write" : "read",
 		     size, blk_rq_pos(rq) * SECTOR_SIZE);
@@ -1475,6 +1447,7 @@ static void rbd_rq_fn(struct request_queue *q)
 		if (!coll) {
 			spin_lock_irq(q->queue_lock);
 			__blk_end_request_all(rq, -ENOMEM);
+			ceph_put_snap_context(snapc);
 			continue;
 		}
 
@@ -1498,7 +1471,7 @@ static void rbd_rq_fn(struct request_queue *q)
 			/* init OSD command: write or read */
 			if (do_write)
 				rbd_req_write(rq, rbd_dev,
-					      rbd_dev->header.snapc,
+					      snapc,
 					      ofs,
 					      op_size, bio,
 					      coll, cur_seg);
@@ -1521,6 +1494,8 @@ next_seg:
 		if (bp)
 			bio_pair_release(bp);
 		spin_lock_irq(q->queue_lock);
+
+		ceph_put_snap_context(snapc);
 	}
 }
 
@@ -1624,57 +1599,6 @@ out_dh:
 	return rc;
 }
 
-/*
- * create a snapshot
- */
-static int rbd_header_add_snap(struct rbd_device *dev,
-			       const char *snap_name,
-			       gfp_t gfp_flags)
-{
-	int name_len = strlen(snap_name);
-	u64 new_snapid;
-	int ret;
-	void *data, *p, *e;
-	u64 ver;
-	struct ceph_mon_client *monc;
-
-	/* we should create a snapshot only if we're pointing at the head */
-	if (dev->snap_id != CEPH_NOSNAP)
-		return -EINVAL;
-
-	monc = &dev->rbd_client->client->monc;
-	ret = ceph_monc_create_snapid(monc, dev->poolid, &new_snapid);
-	dout("created snapid=%lld\n", new_snapid);
-	if (ret < 0)
-		return ret;
-
-	data = kmalloc(name_len + 16, gfp_flags);
-	if (!data)
-		return -ENOMEM;
-
-	p = data;
-	e = data + name_len + 16;
-
-	ceph_encode_string_safe(&p, e, snap_name, name_len, bad);
-	ceph_encode_64_safe(&p, e, new_snapid, bad);
-
-	ret = rbd_req_sync_exec(dev, dev->obj_md_name, "rbd", "snap_add",
-				data, p - data, &ver);
-
-	kfree(data);
-
-	if (ret < 0)
-		return ret;
-
-	down_write(&dev->header_rwsem);
-	dev->header.snapc->seq = new_snapid;
-	up_write(&dev->header_rwsem);
-
-	return 0;
-bad:
-	return -ERANGE;
-}
-
 static void __rbd_remove_all_snaps(struct rbd_device *rbd_dev)
 {
 	struct rbd_snap *snap;
@@ -1699,11 +1623,16 @@ static int __rbd_update_snaps(struct rbd_device *rbd_dev)
 	if (ret < 0)
 		return ret;
 
-	/* resized? */
-	set_capacity(rbd_dev->disk, h.image_size / SECTOR_SIZE);
-
 	down_write(&rbd_dev->header_rwsem);
 
+	/* resized? */
+	if (rbd_dev->snap_id == CEPH_NOSNAP) {
+		sector_t size = (sector_t) h.image_size / SECTOR_SIZE;
+
+		dout("setting size to %llu sectors", (unsigned long long) size);
+		set_capacity(rbd_dev->disk, size);
+	}
+
 	snap_seq = rbd_dev->header.snapc->seq;
 	if (rbd_dev->header.total_snaps &&
 	    rbd_dev->header.snapc->snaps[0] == snap_seq)
@@ -1711,10 +1640,12 @@ static int __rbd_update_snaps(struct rbd_device *rbd_dev)
 		   if head moves */
 		follow_seq = 1;
 
-	kfree(rbd_dev->header.snapc);
+	ceph_put_snap_context(rbd_dev->header.snapc);
 	kfree(rbd_dev->header.snap_names);
 	kfree(rbd_dev->header.snap_sizes);
 
+	rbd_dev->header.obj_version = h.obj_version;
+	rbd_dev->header.image_size = h.image_size;
 	rbd_dev->header.total_snaps = h.total_snaps;
 	rbd_dev->header.snapc = h.snapc;
 	rbd_dev->header.snap_names = h.snap_names;
@@ -1818,8 +1749,13 @@ static ssize_t rbd_size_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
+	sector_t size;
 
-	return sprintf(buf, "%llu\n", (unsigned long long)rbd_dev->header.image_size);
+	down_read(&rbd_dev->header_rwsem);
+	size = get_capacity(rbd_dev->disk);
+	up_read(&rbd_dev->header_rwsem);
+
+	return sprintf(buf, "%llu\n", (unsigned long long) size * SECTOR_SIZE);
 }
 
 static ssize_t rbd_major_show(struct device *dev,
@@ -1890,7 +1826,6 @@ static DEVICE_ATTR(pool, S_IRUGO, rbd_pool_show, NULL);
 static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL);
 static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh);
 static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL);
-static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add);
 
 static struct attribute *rbd_attrs[] = {
 	&dev_attr_size.attr,
@@ -1900,7 +1835,6 @@ static struct attribute *rbd_attrs[] = {
 	&dev_attr_name.attr,
 	&dev_attr_current_snap.attr,
 	&dev_attr_refresh.attr,
-	&dev_attr_create_snap.attr,
 	NULL
 };
 
@@ -2069,7 +2003,14 @@ static int __rbd_init_snaps_header(struct rbd_device *rbd_dev)
 			cur_id = rbd_dev->header.snapc->snaps[i - 1];
 
 		if (!i || old_snap->id < cur_id) {
-			/* old_snap->id was skipped, thus was removed */
+			/*
+			 * old_snap->id was skipped, thus was
+			 * removed.  If this rbd_dev is mapped to
+			 * the removed snapshot, record that it no
+			 * longer exists, to prevent further I/O.
+			 */
+			if (rbd_dev->snap_id == old_snap->id)
+				rbd_dev->snap_exists = false;
 			__rbd_remove_snap_dev(rbd_dev, old_snap);
 			continue;
 		}
@@ -2217,8 +2158,8 @@ static void rbd_id_put(struct rbd_device *rbd_dev)
 		struct rbd_device *rbd_dev;
 
 		rbd_dev = list_entry(tmp, struct rbd_device, node);
-		if (rbd_id > max_id)
-			max_id = rbd_id;
+		if (rbd_dev->id > max_id)
+			max_id = rbd_dev->id;
 	}
 	spin_unlock(&rbd_dev_list_lock);
 
@@ -2515,6 +2456,11 @@ static ssize_t rbd_remove(struct bus_type *bus,
 		goto done;
 	}
 
+	if (rbd_dev->open_count) {
+		ret = -EBUSY;
+		goto done;
+	}
+
 	__rbd_remove_all_snaps(rbd_dev);
 	rbd_bus_del_dev(rbd_dev);
 
@@ -2523,47 +2469,6 @@ done:
 	return ret;
 }
 
-static ssize_t rbd_snap_add(struct device *dev,
-			    struct device_attribute *attr,
-			    const char *buf,
-			    size_t count)
-{
-	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
-	int ret;
-	char *name = kmalloc(count + 1, GFP_KERNEL);
-	if (!name)
-		return -ENOMEM;
-
-	snprintf(name, count, "%s", buf);
-
-	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
-	ret = rbd_header_add_snap(rbd_dev,
-				  name, GFP_KERNEL);
-	if (ret < 0)
-		goto err_unlock;
-
-	ret = __rbd_update_snaps(rbd_dev);
-	if (ret < 0)
-		goto err_unlock;
-
-	/* shouldn't hold ctl_mutex when notifying.. notify might
-	   trigger a watch callback that would need to get that mutex */
-	mutex_unlock(&ctl_mutex);
-
-	/* make a best effort, don't error if failed */
-	rbd_req_sync_notify(rbd_dev, rbd_dev->obj_md_name);
-
-	ret = count;
-	kfree(name);
-	return ret;
-
-err_unlock:
-	mutex_unlock(&ctl_mutex);
-	kfree(name);
-	return ret;
-}
-
 /*
  * create control files in sysfs
  * /sys/bus/rbd/...

drivers/block/sunvdc.c

@@ -461,7 +461,7 @@ static int generic_request(struct vdc_port *port, u8 op, void *buf, int len)
 	int op_len, err;
 	void *req_buf;
 
-	if (!(((u64)1 << ((u64)op - 1)) & port->operations))
+	if (!(((u64)1 << (u64)op) & port->operations))
 		return -EOPNOTSUPP;
 
 	switch (op) {

drivers/bluetooth/ath3k.c

@@ -66,6 +66,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3304) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x0489, 0xE027) },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03F0, 0x311D) },

drivers/bluetooth/btusb.c

@@ -130,6 +130,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },

drivers/char/virtio_console.c

@@ -1808,7 +1808,8 @@ static void virtcons_remove(struct virtio_device *vdev)
 	/* Disable interrupts for vqs */
 	vdev->config->reset(vdev);
 	/* Finish up work that's lined up */
-	cancel_work_sync(&portdev->control_work);
+	if (use_multiport(portdev))
+		cancel_work_sync(&portdev->control_work);
 
 	list_for_each_entry_safe(port, port2, &portdev->ports, list)
 		unplug_port(port);

drivers/dca/dca-core.c

@@ -420,6 +420,11 @@ void unregister_dca_provider(struct dca_provider *dca, struct device *dev)
 
 	raw_spin_lock_irqsave(&dca_lock, flags);
 
+	if (list_empty(&dca_domains)) {
+		raw_spin_unlock_irqrestore(&dca_lock, flags);
+		return;
+	}
+
 	list_del(&dca->node);
 
 	pci_rc = dca_pci_rc_from_dev(dev);

drivers/dma/ioat/dma_v3.c

@@ -951,7 +951,7 @@ static int __devinit ioat_xor_val_self_test(struct ioatdma_device *device)
 			goto free_resources;
 		}
 	}
-	dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_TO_DEVICE);
+	dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
 
 	/* skip validate if the capability is not present */
 	if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask))

drivers/edac/edac_pci_sysfs.c

@@ -257,7 +257,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj,
 	struct edac_pci_dev_attribute *edac_pci_dev;
 	edac_pci_dev = (struct edac_pci_dev_attribute *)attr;
 
-	if (edac_pci_dev->show)
+	if (edac_pci_dev->store)
 		return edac_pci_dev->store(edac_pci_dev->value, buffer, count);
 	return -EIO;
 }

drivers/edac/i7300_edac.c

@@ -215,8 +215,8 @@ static const char *ferr_fat_fbd_name[] = {
 	[0]  = "Memory Write error on non-redundant retry or "
 	       "FBD configuration Write error on retry",
 };
-#define GET_FBD_FAT_IDX(fbderr)	(fbderr & (3 << 28))
-#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
+#define GET_FBD_FAT_IDX(fbderr)	(((fbderr) >> 28) & 3)
+#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22))
 
 #define FERR_NF_FBD	0xa0
 static const char *ferr_nf_fbd_name[] = {
@@ -243,7 +243,7 @@ static const char *ferr_nf_fbd_name[] = {
 	[1]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
 	[0]  = "Uncorrectable Data ECC on Replay",
 };
-#define GET_FBD_NF_IDX(fbderr)	(fbderr & (3 << 28))
+#define GET_FBD_NF_IDX(fbderr)	(((fbderr) >> 28) & 3)
 #define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\
 			      (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\
 			      (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\
@@ -485,7 +485,7 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_nf_fbd_name));
 		specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
-		branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
+		branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0;
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 			REDMEMA, &syndrome);

drivers/firewire/net.c

@@ -861,8 +861,8 @@ static void fwnet_receive_broadcast(struct fw_iso_context *context,
 	if (specifier_id == IANA_SPECIFIER_ID && ver == RFC2734_SW_VERSION) {
 		buf_ptr += 2;
 		length -= IEEE1394_GASP_HDR_SIZE;
-		fwnet_incoming_packet(dev, buf_ptr, length,
-				      source_node_id, -1, true);
+		fwnet_incoming_packet(dev, buf_ptr, length, source_node_id,
+				      context->card->generation, true);
 	}
 
 	packet.payload_length = dev->rcv_buffer_size;
@@ -958,7 +958,12 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 			break;
 		}
 
-		skb_pull(skb, ptask->max_payload);
+		if (ptask->dest_node == IEEE1394_ALL_NODES) {
+			skb_pull(skb,
+				 ptask->max_payload + IEEE1394_GASP_HDR_SIZE);
+		} else {
+			skb_pull(skb, ptask->max_payload);
+		}
 		if (ptask->outstanding_pkts > 1) {
 			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
 					  dg_size, fg_off, datagram_label);
@@ -1062,7 +1067,7 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 		smp_rmb();
 		node_id = dev->card->node_id;
 
-		p = skb_push(ptask->skb, 8);
+		p = skb_push(ptask->skb, IEEE1394_GASP_HDR_SIZE);
 		put_unaligned_be32(node_id << 16 | IANA_SPECIFIER_ID >> 8, p);
 		put_unaligned_be32((IANA_SPECIFIER_ID & 0xff) << 24
 						| RFC2734_SW_VERSION, &p[4]);