Linux 4.14.44

[ Upstream commit 82d632b85e ]

Fix the following warning in MIPS allmodconfig by adding a
MODULE_LICENSE() at the end of rtc-goldfish.c, based on the file header
comment which says GNU General Public License version 2:

WARNING: modpost: missing MODULE_LICENSE() in drivers/rtc/rtc-goldfish.o

Fixes: f22d9cdcb5 ("rtc: goldfish: Add RTC driver for Android emulator")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-bus-iio

@@ -32,7 +32,7 @@ Description:
 		Description of the physical chip / device for device X.
 		Typically a part number.
 
-What:		/sys/bus/iio/devices/iio:deviceX/timestamp_clock
+What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -378,6 +378,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities

Documentation/admin-guide/kernel-parameters.txt

@@ -2541,6 +2541,9 @@
 
 	noalign		[KNL,ARM]
 
+	noaltinstr	[S390] Disables alternative instructions patching
+			(CPU alternatives feature).
+
 	noapic		[SMP,APIC] Tells the kernel to not make use of any
 			IOAPICs that may be present in the system.
 
@@ -2597,6 +2600,9 @@
 			allow data leaks with this option, which is equivalent
 			to spectre_v2=off.
 
+	nospec_store_bypass_disable
+			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
@@ -3927,6 +3933,48 @@
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
 
+	spec_store_bypass_disable=
+			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
+			(Speculative Store Bypass vulnerability)
+
+			Certain CPUs are vulnerable to an exploit against a
+			a common industry wide performance optimization known
+			as "Speculative Store Bypass" in which recent stores
+			to the same memory location may not be observed by
+			later loads during speculative execution. The idea
+			is that such stores are unlikely and that they can
+			be detected prior to instruction retirement at the
+			end of a particular speculation execution window.
+
+			In vulnerable processors, the speculatively forwarded
+			store can be used in a cache side channel attack, for
+			example to read memory to which the attacker does not
+			directly have access (e.g. inside sandboxed code).
+
+			This parameter controls whether the Speculative Store
+			Bypass optimization is used.
+
+			on      - Unconditionally disable Speculative Store Bypass
+			off     - Unconditionally enable Speculative Store Bypass
+			auto    - Kernel detects whether the CPU model contains an
+				  implementation of Speculative Store Bypass and
+				  picks the most appropriate mitigation. If the
+				  CPU is not vulnerable, "off" is selected. If the
+				  CPU is vulnerable the default mitigation is
+				  architecture and Kconfig dependent. See below.
+			prctl   - Control Speculative Store Bypass per thread
+				  via prctl. Speculative Store Bypass is enabled
+				  for a process by default. The state of the control
+				  is inherited on fork.
+			seccomp - Same as "prctl" above, but all seccomp threads
+				  will disable SSB unless they explicitly opt out.
+
+			Not specifying this option is equivalent to
+			spec_store_bypass_disable=auto.
+
+			Default mitigations:
+			X86:	If CONFIG_SECCOMP=y "seccomp", otherwise "prctl"
+
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=
 	spia_pedr=

Documentation/arm64/silicon-errata.txt

@@ -55,6 +55,7 @@ stable kernels.
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
+| ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |

Documentation/device-mapper/thin-provisioning.txt

@@ -112,9 +112,11 @@ $low_water_mark is expressed in blocks of size $data_block_size.  If
 free space on the data device drops below this level then a dm event
 will be triggered which a userspace daemon should catch allowing it to
 extend the pool device.  Only one such event will be sent.
-Resuming a device with a new table itself triggers an event so the
-userspace daemon can use this to detect a situation where a new table
-already exceeds the threshold.
+
+No special event is triggered if a just resumed device's free space is below
+the low water mark. However, resuming a device always triggers an
+event; a userspace daemon should verify that free space exceeds the low
+water mark when handling this event.
 
 A low water mark for the metadata device is maintained in the kernel and
 will trigger a dm event if free space on the metadata device drops below

Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt

@@ -2,7 +2,7 @@ Toppoly TD028TTEC1 Panel
 ========================
 
 Required properties:
-- compatible: "toppoly,td028ttec1"
+- compatible: "tpo,td028ttec1"
 
 Optional properties:
 - label: a symbolic name for the panel
@@ -14,7 +14,7 @@ Example
 -------
 
 lcd-panel: td028ttec1@0 {
-	compatible = "toppoly,td028ttec1";
+	compatible = "tpo,td028ttec1";
 	reg = <0>;
 	spi-max-frequency = <100000>;
 	spi-cpol;

Documentation/devicetree/bindings/power/mti,mips-cpc.txt

@@ -0,0 +1,8 @@
+Binding for MIPS Cluster Power Controller (CPC).
+
+This binding allows a system to specify where the CPC registers are
+located.
+
+Required properties:
+compatible : Should be "mti,mips-cpc".
+regs: Should describe the address & size of the CPC register region.

Documentation/devicetree/bindings/serial/8250.txt

@@ -24,6 +24,7 @@ Required properties:
 	- "ti,da830-uart"
 	- "aspeed,ast2400-vuart"
 	- "aspeed,ast2500-vuart"
+	- "nuvoton,npcm750-uart"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -12,6 +12,7 @@ Required properties:
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
     - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 compatible device
     - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
     - "xhci-platform" (deprecated)

Documentation/networking/ip-sysctl.txt

@@ -508,7 +508,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	min: Minimal size of receive buffer used by TCP sockets.
 	It is guaranteed to each TCP socket, even under moderate memory
 	pressure.
-	Default: 1 page
+	Default: 4K
 
 	default: initial size of receive buffer used by TCP sockets.
 	This value overrides net.core.rmem_default used by other protocols.
@@ -666,7 +666,7 @@ tcp_window_scaling - BOOLEAN
 tcp_wmem - vector of 3 INTEGERs: min, default, max
 	min: Amount of memory reserved for send buffers for TCP sockets.
 	Each TCP socket has rights to use it due to fact of its birth.
-	Default: 1 page
+	Default: 4K
 
 	default: initial size of send buffer used by TCP sockets.  This
 	value overrides net.core.wmem_default used by other protocols.

Documentation/sphinx/kerneldoc.py

@@ -36,8 +36,7 @@ import glob
 
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
-from docutils.parsers.rst import directives
-from sphinx.util.compat import Directive
+from docutils.parsers.rst import directives, Directive
 from sphinx.ext.autodoc import AutodocReporter
 
 __version__  = '1.0'

Documentation/userspace-api/index.rst

@@ -19,6 +19,7 @@ place where this information is gathered.
    no_new_privs
    seccomp_filter
    unshare
+   spec_ctrl
 
 .. only::  subproject and html
 

Documentation/userspace-api/spec_ctrl.rst

@@ -0,0 +1,94 @@
+===================
+Speculation Control
+===================
+
+Quite some CPUs have speculation-related misfeatures which are in
+fact vulnerabilities causing data leaks in various forms even across
+privilege domains.
+
+The kernel provides mitigation for such vulnerabilities in various
+forms. Some of these mitigations are compile-time configurable and some
+can be supplied on the kernel command line.
+
+There is also a class of mitigations which are very expensive, but they can
+be restricted to a certain set of processes or tasks in controlled
+environments. The mechanism to control these mitigations is via
+:manpage:`prctl(2)`.
+
+There are two prctl options which are related to this:
+
+ * PR_GET_SPECULATION_CTRL
+
+ * PR_SET_SPECULATION_CTRL
+
+PR_GET_SPECULATION_CTRL
+-----------------------
+
+PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
+which is selected with arg2 of prctl(2). The return value uses bits 0-3 with
+the following meaning:
+
+==== ===================== ===================================================
+Bit  Define                Description
+==== ===================== ===================================================
+0    PR_SPEC_PRCTL         Mitigation can be controlled per task by
+                           PR_SET_SPECULATION_CTRL.
+1    PR_SPEC_ENABLE        The speculation feature is enabled, mitigation is
+                           disabled.
+2    PR_SPEC_DISABLE       The speculation feature is disabled, mitigation is
+                           enabled.
+3    PR_SPEC_FORCE_DISABLE Same as PR_SPEC_DISABLE, but cannot be undone. A
+                           subsequent prctl(..., PR_SPEC_ENABLE) will fail.
+==== ===================== ===================================================
+
+If all bits are 0 the CPU is not affected by the speculation misfeature.
+
+If PR_SPEC_PRCTL is set, then the per-task control of the mitigation is
+available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
+misfeature will fail.
+
+PR_SET_SPECULATION_CTRL
+-----------------------
+
+PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
+is selected by arg2 of :manpage:`prctl(2)` per task. arg3 is used to hand
+in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE or
+PR_SPEC_FORCE_DISABLE.
+
+Common error codes
+------------------
+======= =================================================================
+Value   Meaning
+======= =================================================================
+EINVAL  The prctl is not implemented by the architecture or unused
+        prctl(2) arguments are not 0.
+
+ENODEV  arg2 is selecting a not supported speculation misfeature.
+======= =================================================================
+
+PR_SET_SPECULATION_CTRL error codes
+-----------------------------------
+======= =================================================================
+Value   Meaning
+======= =================================================================
+0       Success
+
+ERANGE  arg3 is incorrect, i.e. it's neither PR_SPEC_ENABLE nor
+        PR_SPEC_DISABLE nor PR_SPEC_FORCE_DISABLE.
+
+ENXIO   Control of the selected speculation misfeature is not possible.
+        See PR_GET_SPECULATION_CTRL.
+
+EPERM   Speculation was disabled with PR_SPEC_FORCE_DISABLE and caller
+        tried to enable it again.
+======= =================================================================
+
+Speculation misfeature controls
+-------------------------------
+- PR_SPEC_STORE_BYPASS: Speculative Store Bypass
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);

Documentation/virtual/kvm/api.txt

@@ -1837,6 +1837,7 @@ registers, find a list below:
   PPC	| KVM_REG_PPC_DBSR              | 32
   PPC   | KVM_REG_PPC_TIDR              | 64
   PPC   | KVM_REG_PPC_PSSCR             | 64
+  PPC   | KVM_REG_PPC_DEC_EXPIRY        | 64
   PPC   | KVM_REG_PPC_TM_GPR0           | 64
           ...
   PPC   | KVM_REG_PPC_TM_GPR31          | 64
@@ -1939,6 +1940,9 @@ ARM 32-bit VFP control registers have the following id bit patterns:
 ARM 64-bit FP registers have the following id bit patterns:
   0x4030 0000 0012 0 <regno:12>
 
+ARM firmware pseudo-registers have the following bit pattern:
+  0x4030 0000 0014 <regno:16>
+
 
 arm64 registers are mapped using the lower 32 bits. The upper 16 of
 that is the register group type, or coprocessor number:
@@ -1955,6 +1959,9 @@ arm64 CCSIDR registers are demultiplexed by CSSELR value:
 arm64 system registers have the following id bit patterns:
   0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3>
 
+arm64 firmware pseudo-registers have the following bit pattern:
+  0x6030 0000 0014 <regno:16>
+
 
 MIPS registers are mapped using the lower 32 bits.  The upper 16 of that is
 the register group type:
@@ -2489,7 +2496,8 @@ Possible features:
 	  and execute guest code when KVM_RUN is called.
 	- KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode.
 	  Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
-	- KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
+	- KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 (or a future revision
+          backward compatible with v0.2) for the CPU.
 	  Depends on KVM_CAP_ARM_PSCI_0_2.
 	- KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
 	  Depends on KVM_CAP_ARM_PMU_V3.

Documentation/virtual/kvm/arm/psci.txt

@@ -0,0 +1,30 @@
+KVM implements the PSCI (Power State Coordination Interface)
+specification in order to provide services such as CPU on/off, reset
+and power-off to the guest.
+
+The PSCI specification is regularly updated to provide new features,
+and KVM implements these updates if they make sense from a virtualization
+point of view.
+
+This means that a guest booted on two different versions of KVM can
+observe two different "firmware" revisions. This could cause issues if
+a given guest is tied to a particular PSCI revision (unlikely), or if
+a migration causes a different PSCI version to be exposed out of the
+blue to an unsuspecting guest.
+
+In order to remedy this situation, KVM exposes a set of "firmware
+pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
+interface. These registers can be saved/restored by userspace, and set
+to a convenient value if required.
+
+The following register is defined:
+
+* KVM_REG_ARM_PSCI_VERSION:
+
+  - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
+    (and thus has already been initialized)
+  - Returns the current PSCI version on GET_ONE_REG (defaulting to the
+    highest PSCI version implemented by KVM and compatible with v0.2)
+  - Allows any PSCI version implemented by KVM and compatible with
+    v0.2 to be set with SET_ONE_REG
+  - Affects the whole VM (even if the register view is per-vcpu)

Documentation/virtual/kvm/cpuid.txt

@@ -54,6 +54,10 @@ KVM_FEATURE_PV_UNHALT              ||     7 || guest checks this feature bit
                                    ||       || before enabling paravirtualized
                                    ||       || spinlock support.
 ------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF_VMEXIT        ||    10 || paravirtualized async PF VM exit
+                                   ||       || can be enabled by setting bit 2
+                                   ||       || when writing to msr 0x4b564d02
+------------------------------------------------------------------------------
 KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
                                    ||       || per-cpu warps are expected in
                                    ||       || kvmclock.

Documentation/virtual/kvm/msr.txt

@@ -170,7 +170,8 @@ MSR_KVM_ASYNC_PF_EN: 0x4b564d02
 	when asynchronous page faults are enabled on the vcpu 0 when
 	disabled. Bit 1 is 1 if asynchronous page faults can be injected
 	when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults
-	are delivered to L1 as #PF vmexits.
+	are delivered to L1 as #PF vmexits.  Bit 2 can be set only if
+	KVM_FEATURE_ASYNC_PF_VMEXIT is present in CPUID.
 
 	First 4 byte of 64 byte memory location will be written to by
 	the hypervisor at the time of asynchronous page fault (APF)

MAINTAINERS

@@ -9001,6 +9001,7 @@ MIPS GENERIC PLATFORM
 M:	Paul Burton <paul.burton@mips.com>
 L:	linux-mips@linux-mips.org
 S:	Supported
+F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 F:	arch/mips/generic/
 F:	arch/mips/tools/generic-board-config.sh
 

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 14
-SUBLEVEL = 21
+SUBLEVEL = 44
 EXTRAVERSION =
 NAME = Petit Gorille
 
@@ -11,6 +11,10 @@ NAME = Petit Gorille
 # Comments in this file are targeted only to the developer, do not
 # expect to learn how to build the kernel reading this file.
 
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
 # o Do not use make's built-in rules and variables
 #   (this increases performance and avoids hard-to-debug behaviour);
 # o Look for make include files relative to root of kernel src
@@ -117,10 +121,6 @@ ifeq ("$(origin O)", "command line")
   KBUILD_OUTPUT := $(O)
 endif
 
-# That's our default target when none is given on the command line
-PHONY := _all
-_all:
-
 # Cancel implicit rules on top Makefile
 $(CURDIR)/Makefile Makefile: ;
 
@@ -187,15 +187,6 @@ ifeq ("$(origin M)", "command line")
   KBUILD_EXTMOD := $(M)
 endif
 
-# If building an external module we do not care about the all: rule
-# but instead _all depend on modules
-PHONY += all
-ifeq ($(KBUILD_EXTMOD),)
-_all: all
-else
-_all: modules
-endif
-
 ifeq ($(KBUILD_SRC),)
         # building in the source tree
         srctree := .
@@ -207,6 +198,9 @@ else
                 srctree := $(KBUILD_SRC)
         endif
 endif
+
+export KBUILD_CHECKSRC KBUILD_EXTMOD KBUILD_SRC
+
 objtree		:= .
 src		:= $(srctree)
 obj		:= $(objtree)
@@ -215,6 +209,74 @@ VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
 export srctree objtree VPATH
 
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+version_h := include/generated/uapi/linux/version.h
+old_version_h := include/linux/version.h
+
+no-dot-config-targets := clean mrproper distclean \
+			 cscope gtags TAGS tags help% %docs check% coccicheck \
+			 $(version_h) headers_% archheaders archscripts \
+			 kernelversion %src-pkg
+
+config-targets := 0
+mixed-targets  := 0
+dot-config     := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+		dot-config := 0
+	endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+                config-targets := 1
+                ifneq ($(words $(MAKECMDGOALS)),1)
+                        mixed-targets := 1
+                endif
+        endif
+endif
+# install and modules_install need also be processed one by one
+ifneq ($(filter install,$(MAKECMDGOALS)),)
+        ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
+	        mixed-targets := 1
+        endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+PHONY += $(MAKECMDGOALS) __build_one_by_one
+
+$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
+	@:
+
+__build_one_by_one:
+	$(Q)set -e; \
+	for i in $(MAKECMDGOALS); do \
+		$(MAKE) -f $(srctree)/Makefile $$i; \
+	done
+
+else
+
+# We need some generic definitions (do not try to remake the file).
+scripts/Kbuild.include: ;
+include scripts/Kbuild.include
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 # first, and if a usermode build is happening, the "ARCH=um" on the command
 # line overrides the setting of ARCH below.  If a native build is happening,
@@ -312,40 +374,6 @@ HOSTCFLAGS  += -Wno-unused-value -Wno-unused-parameter \
 		-Wno-missing-field-initializers -fno-delete-null-pointer-checks
 endif
 
-# Decide whether to build built-in, modular, or both.
-# Normally, just do built-in.
-
-KBUILD_MODULES :=
-KBUILD_BUILTIN := 1
-
-# If we have only "make modules", don't compile built-in objects.
-# When we're building modules with modversions, we need to consider
-# the built-in objects during the descend as well, in order to
-# make sure the checksums are up to date before we record them.
-
-ifeq ($(MAKECMDGOALS),modules)
-  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
-endif
-
-# If we have "make <whatever> modules", compile modules
-# in addition to whatever we do anyway.
-# Just "make" or "make all" shall build modules as well
-
-ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
-  KBUILD_MODULES := 1
-endif
-
-ifeq ($(MAKECMDGOALS),)
-  KBUILD_MODULES := 1
-endif
-
-export KBUILD_MODULES KBUILD_BUILTIN
-export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-
-# We need some generic definitions (do not try to remake the file).
-scripts/Kbuild.include: ;
-include scripts/Kbuild.include
-
 # Make variables (CC, etc...)
 AS		= $(CROSS_COMPILE)as
 LD		= $(CROSS_COMPILE)ld
@@ -405,11 +433,6 @@ KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 GCC_PLUGINS_CFLAGS :=
 
-# Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
-KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-
-export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
 export CPP AR NM STRIP OBJCOPY OBJDUMP HOSTLDFLAGS HOST_LOADLIBES
 export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
@@ -459,73 +482,23 @@ ifneq ($(KBUILD_SRC),)
 	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 endif
 
-# Support for using generic headers in asm-generic
-PHONY += asm-generic uapi-asm-generic
-asm-generic: uapi-asm-generic
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
-	            src=asm obj=arch/$(SRCARCH)/include/generated/asm
-uapi-asm-generic:
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
-	            src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
-
-# To make sure we do not include .config for any of the *config targets
-# catch them early, and hand them over to scripts/kconfig/Makefile
-# It is allowed to specify more targets when calling make, including
-# mixing *config targets and build targets.
-# For example 'make oldconfig all'.
-# Detect when mixed targets is specified, and make a second invocation
-# of make so .config is not included in this case either (for *config).
-
-version_h := include/generated/uapi/linux/version.h
-old_version_h := include/linux/version.h
-
-no-dot-config-targets := clean mrproper distclean \
-			 cscope gtags TAGS tags help% %docs check% coccicheck \
-			 $(version_h) headers_% archheaders archscripts \
-			 kernelversion %src-pkg
-
-config-targets := 0
-mixed-targets  := 0
-dot-config     := 1
-
-ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
-	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
-		dot-config := 0
-	endif
+ifeq ($(cc-name),clang)
+ifneq ($(CROSS_COMPILE),)
+CLANG_TARGET	:= --target=$(notdir $(CROSS_COMPILE:%-=%))
+GCC_TOOLCHAIN	:= $(realpath $(dir $(shell which $(LD)))/..)
+endif
+ifneq ($(GCC_TOOLCHAIN),)
+CLANG_GCC_TC	:= --gcc-toolchain=$(GCC_TOOLCHAIN)
+endif
+KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
+KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 endif
 
-ifeq ($(KBUILD_EXTMOD),)
-        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
-                config-targets := 1
-                ifneq ($(words $(MAKECMDGOALS)),1)
-                        mixed-targets := 1
-                endif
-        endif
-endif
-# install and modules_install need also be processed one by one
-ifneq ($(filter install,$(MAKECMDGOALS)),)
-        ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
-	        mixed-targets := 1
-        endif
-endif
+RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register
+RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk
+RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG)))
+export RETPOLINE_CFLAGS
 
-ifeq ($(mixed-targets),1)
-# ===========================================================================
-# We're called with mixed targets (*config and build targets).
-# Handle them one by one.
-
-PHONY += $(MAKECMDGOALS) __build_one_by_one
-
-$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
-	@:
-
-__build_one_by_one:
-	$(Q)set -e; \
-	for i in $(MAKECMDGOALS); do \
-		$(MAKE) -f $(srctree)/Makefile $$i; \
-	done
-
-else
 ifeq ($(config-targets),1)
 # ===========================================================================
 # *config targets only - make sure prerequisites are updated, and descend
@@ -548,6 +521,44 @@ else
 # Build targets only - this includes vmlinux, arch specific targets, clean
 # targets and others. In general all targets except *config targets.
 
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+# If we have only "make modules", don't compile built-in objects.
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+# If we have "make <whatever> modules", compile modules
+# in addition to whatever we do anyway.
+# Just "make" or "make all" shall build modules as well
+
+ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+  KBUILD_MODULES := 1
+endif
+
+ifeq ($(MAKECMDGOALS),)
+  KBUILD_MODULES := 1
+endif
+
+export KBUILD_MODULES KBUILD_BUILTIN
+
 ifeq ($(KBUILD_EXTMOD),)
 # Additional helpers built in scripts/
 # Carefully list dependencies so we do not try to build scripts twice
@@ -699,15 +710,6 @@ endif
 KBUILD_CFLAGS += $(stackp-flag)
 
 ifeq ($(cc-name),clang)
-ifneq ($(CROSS_COMPILE),)
-CLANG_TARGET	:= --target=$(notdir $(CROSS_COMPILE:%-=%))
-GCC_TOOLCHAIN	:= $(realpath $(dir $(shell which $(LD)))/..)
-endif
-ifneq ($(GCC_TOOLCHAIN),)
-CLANG_GCC_TC	:= --gcc-toolchain=$(GCC_TOOLCHAIN)
-endif
-KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
-KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
 KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
@@ -803,6 +805,15 @@ KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
+# clang sets -fmerge-all-constants by default as optimization, but this
+# is non-conforming behavior for C and in fact breaks the kernel, so we
+# need to disable it here generally.
+KBUILD_CFLAGS	+= $(call cc-option,-fno-merge-all-constants)
+
+# for gcc -fno-merge-all-constants disables everything, but it is fine
+# to have actual conforming behavior enabled.
+KBUILD_CFLAGS	+= $(call cc-option,-fmerge-constants)
+
 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
 KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
 
@@ -1076,6 +1087,15 @@ prepare0: archprepare gcc-plugins
 # All the preparing..
 prepare: prepare0 prepare-objtool
 
+# Support for using generic headers in asm-generic
+PHONY += asm-generic uapi-asm-generic
+asm-generic: uapi-asm-generic
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            src=asm obj=arch/$(SRCARCH)/include/generated/asm
+uapi-asm-generic:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
+
 PHONY += prepare-objtool
 prepare-objtool: $(objtool_target)
 

arch/alpha/kernel/console.c

@@ -21,6 +21,7 @@
 struct pci_controller *pci_vga_hose;
 static struct resource alpha_vga = {
 	.name	= "alpha-vga+",
+	.flags	= IORESOURCE_IO,
 	.start	= 0x3C0,
 	.end	= 0x3DF
 };

arch/arm/boot/dts/am4372.dtsi

@@ -927,7 +927,8 @@
 			reg = <0x48038000 0x2000>,
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8 2>,
@@ -941,7 +942,8 @@
 			reg = <0x4803C000 0x2000>,
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10 2>,

arch/arm/boot/dts/am437x-cm-t43.dts

@@ -301,8 +301,8 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	dmas = <&edma 16
-		&edma 17>;
+	dmas = <&edma 16 0
+		&edma 17 0>;
 	dma-names = "tx0", "rx0";
 
 	flash: w25q64cvzpig@0 {

arch/arm/boot/dts/aspeed-ast2500-evb.dts

@@ -16,7 +16,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };

arch/arm/boot/dts/at91sam9g25.dtsi

@@ -21,7 +21,7 @@
 				atmel,mux-mask = <
 				      /*    A         B          C     */
 				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
-				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
 				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;

arch/arm/boot/dts/da850-lego-ev3.dts

@@ -178,7 +178,7 @@
 	 */
 	battery {
 		pinctrl-names = "default";
-		pintctrl-0 = <&battery_pins>;
+		pinctrl-0 = <&battery_pins>;
 		compatible = "lego,ev3-battery";
 		io-channels = <&adc 4>, <&adc 3>;
 		io-channel-names = "voltage", "current";
@@ -392,7 +392,7 @@
 	batt_volt_en {
 		gpio-hog;
 		gpios = <6 GPIO_ACTIVE_HIGH>;
-		output-low;
+		output-high;
 	};
 };
 

arch/arm/boot/dts/dra76-evm.dts

@@ -148,6 +148,7 @@
 		compatible = "ti,tps65917";
 		reg = <0x58>;
 		ti,system-power-controller;
+		ti,palmas-override-powerhold;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -395,7 +395,7 @@
 		reg = <0>;
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;

arch/arm/boot/dts/exynos5250.dtsi

@@ -643,7 +643,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL0>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc0>;
+			iommus = <&sysmmu_gsc0>;
 		};
 
 		gsc_1:  gsc@13e10000 {
@@ -653,7 +653,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL1>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc1>;
+			iommus = <&sysmmu_gsc1>;
 		};
 
 		gsc_2:  gsc@13e20000 {
@@ -663,7 +663,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL2>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc2>;
+			iommus = <&sysmmu_gsc2>;
 		};
 
 		gsc_3:  gsc@13e30000 {
@@ -673,7 +673,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL3>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc3>;
+			iommus = <&sysmmu_gsc3>;
 		};
 
 		hdmi: hdmi@14530000 {

arch/arm/boot/dts/imx7d-sdb.dts

@@ -82,7 +82,7 @@
 		enable-active-high;
 	};
 
-	reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg2_vbus";
 		regulator-min-microvolt = <5000000>;

arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts

@@ -72,7 +72,8 @@
 };
 
 &gpmc {
-	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -37,7 +37,7 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
@@ -97,6 +97,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -121,7 +123,7 @@
 
 &mmc3 {
 	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
-	pinctrl-0 = <&mmc3_pins>;
+	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
 	non-removable;
@@ -132,8 +134,8 @@
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1273";
 		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
 		ref-clock-frequency = <26000000>;
 	};
 };
@@ -157,8 +159,6 @@
 			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
 			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
 			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
 		>;
@@ -217,7 +217,12 @@
 		>;
 	};
 
-
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {
@@ -228,6 +233,12 @@
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
 		>;
 	};
+	wl127x_gpio: pinmux_wl127x_gpio_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -104,6 +104,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -211,6 +213,12 @@
 			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &uart2 {

arch/arm/boot/dts/ls1021a-qds.dts

@@ -215,7 +215,7 @@
 				reg = <0x2a>;
 				VDDA-supply = <&reg_3p3v>;
 				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk 1>;
+				clocks = <&sys_mclk>;
 			};
 		};
 	};

arch/arm/boot/dts/ls1021a-twr.dts

@@ -187,7 +187,7 @@
 		reg = <0x0a>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk 1>;
+		clocks = <&sys_mclk>;
 	};
 };
 

arch/arm/boot/dts/ls1021a.dtsi

@@ -155,7 +155,7 @@
 		};
 
 		esdhc: esdhc@1560000 {
-			compatible = "fsl,esdhc";
+			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;

arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts

@@ -39,6 +39,24 @@
 		};
 	};
 
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -468,12 +486,14 @@
 };
 
 &usb1 {
-	vusb33-supply = <&mt6323_vusb_reg>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
 	status = "okay";
 };
 
 &usb2 {
-	vusb33-supply = <&mt6323_vusb_reg>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
 	status = "okay";
 };
 

arch/arm/boot/dts/omap4.dtsi

@@ -354,7 +354,7 @@
 		elm: elm@48078000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48078000 0x2000>;
-			interrupts = <4>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "elm";
 			status = "disabled";
 		};
@@ -861,14 +861,12 @@
 			usbhsohci: ohci@4a064800 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci@4a064c00 {
 				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -278,6 +278,12 @@
 		};
 	};
 
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -642,12 +648,6 @@
 		};
 	};
 
-	cec_clock: cec-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -110,26 +110,6 @@
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-	operating-points = <
-		/* KHz    uV */
-		1800000	1400000
-		1608000	1350000
-		1512000 1300000
-		1416000 1200000
-		1200000 1100000
-		1008000 1050000
-		 816000 1000000
-		 696000  950000
-		 600000  900000
-		 408000  900000
-		 312000  900000
-		 216000  900000
-		 126000  900000
-	>;
-};
-
 &emmc {
 	status = "okay";
 	bus-width = <8>;

arch/arm/boot/dts/sama5d4.dtsi

@@ -1365,7 +1365,7 @@
 			pinctrl@fc06a000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
 				ranges = <0xfc068000 0xfc068000 0x100
 					  0xfc06a000 0xfc06a000 0x4000>;
 				/* WARNING: revisit as pin spec has changed */

arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts

@@ -42,7 +42,6 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -99,6 +98,7 @@
 	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
 	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 30000>;
@@ -118,7 +118,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
 	cd-inverted;
@@ -132,7 +132,7 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_a>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
@@ -163,6 +163,8 @@
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
 	};
 };
 
@@ -193,7 +195,28 @@
 
 #include "axp22x.dtsi"
 
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_dc5ldo {
+	regulator-always-on;
 	regulator-min-microvolt = <700000>;
 	regulator-max-microvolt = <1320000>;
 	regulator-name = "vdd-cpus";
@@ -233,6 +256,40 @@
 	regulator-name = "vcc-dram";
 };
 
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;

arch/arm/common/bL_switcher_dummy_if.c

@@ -57,3 +57,7 @@ static struct miscdevice bL_switcher_device = {
 	&bL_switcher_fops
 };
 module_misc_device(bL_switcher_device);
+
+MODULE_AUTHOR("Nicolas Pitre <nico@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("big.LITTLE switcher dummy user interface");

arch/arm/configs/socfpga_defconfig

@@ -57,6 +57,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
 CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_OF_OVERLAY=y
 CONFIG_OF_CONFIGFS=y

arch/arm/crypto/Makefile

@@ -54,6 +54,7 @@ crct10dif-arm-ce-y	:= crct10dif-ce-core.o crct10dif-ce-glue.o
 crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
 chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
 
+ifdef REGENERATE_ARM_CRYPTO
 quiet_cmd_perl = PERL    $@
       cmd_perl = $(PERL) $(<) > $(@)
 
@@ -62,5 +63,6 @@ $(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl
 
 $(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl
 	$(call cmd,perl)
+endif
 
 .PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S

arch/arm/include/asm/assembler.h

@@ -536,4 +536,14 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #endif
 	.endm
 
+#ifdef CONFIG_KPROBES
+#define _ASM_NOKPROBE(entry)				\
+	.pushsection "_kprobe_blacklist", "aw" ;	\
+	.balign 4 ;					\
+	.long entry;					\
+	.popsection
+#else
+#define _ASM_NOKPROBE(entry)
+#endif
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/kvm_host.h

@@ -75,6 +75,9 @@ struct kvm_arch {
 	/* Interrupt controller */
 	struct vgic_dist	vgic;
 	int max_vcpus;
+
+	/* Mandated version of PSCI */
+	u32 psci_version;
 };
 
 #define KVM_NR_MEM_OBJS     40

arch/arm/include/asm/kvm_mmu.h

@@ -221,6 +221,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
 	return 8;
 }
 
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+				      gpa_t gpa, void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_read_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
 static inline void *kvm_get_hyp_vector(void)
 {
 	return kvm_ksym_ref(__kvm_hyp_vector);

arch/arm/include/uapi/asm/kvm.h

@@ -180,6 +180,12 @@ struct kvm_arch_memory_slot {
 #define KVM_REG_ARM_VFP_FPINST		0x1009
 #define KVM_REG_ARM_VFP_FPINST2		0x100A
 
+/* KVM-as-firmware specific pseudo-registers */
+#define KVM_REG_ARM_FW			(0x0014 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_REG(r)		(KVM_REG_ARM | KVM_REG_SIZE_U64 | \
+					 KVM_REG_ARM_FW | ((r) & 0xffff))
+#define KVM_REG_ARM_PSCI_VERSION	KVM_REG_ARM_FW_REG(0)
+
 /* Device Control API: ARM VGIC */
 #define KVM_DEV_ARM_VGIC_GRP_ADDR	0
 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1

arch/arm/kernel/traps.c

@@ -19,6 +19,7 @@
 #include <linux/uaccess.h>
 #include <linux/hardirq.h>
 #include <linux/kdebug.h>
+#include <linux/kprobes.h>
 #include <linux/module.h>
 #include <linux/kexec.h>
 #include <linux/bug.h>
@@ -417,7 +418,8 @@ void unregister_undef_hook(struct undef_hook *hook)
 	raw_spin_unlock_irqrestore(&undef_lock, flags);
 }
 
-static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+static nokprobe_inline
+int call_undef_hook(struct pt_regs *regs, unsigned int instr)
 {
 	struct undef_hook *hook;
 	unsigned long flags;
@@ -490,6 +492,7 @@ die_sig:
 
 	arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
 }
+NOKPROBE_SYMBOL(do_undefinstr)
 
 /*
  * Handle FIQ similarly to NMI on x86 systems.

arch/arm/kvm/guest.c

@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
+#include <kvm/arm_psci.h>
 #include <asm/cputype.h>
 #include <linux/uaccess.h>
 #include <asm/kvm.h>
@@ -176,6 +177,7 @@ static unsigned long num_core_regs(void)
 unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu)
 {
 	return num_core_regs() + kvm_arm_num_coproc_regs(vcpu)
+		+ kvm_arm_get_fw_num_regs(vcpu)
 		+ NUM_TIMER_REGS;
 }
 
@@ -196,6 +198,11 @@ int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 		uindices++;
 	}
 
+	ret = kvm_arm_copy_fw_reg_indices(vcpu, uindices);
+	if (ret)
+		return ret;
+	uindices += kvm_arm_get_fw_num_regs(vcpu);
+
 	ret = copy_timer_indices(vcpu, uindices);
 	if (ret)
 		return ret;
@@ -214,6 +221,9 @@ int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE)
 		return get_core_reg(vcpu, reg);
 
+	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_FW)
+		return kvm_arm_get_fw_reg(vcpu, reg);
+
 	if (is_timer_reg(reg->id))
 		return get_timer_reg(vcpu, reg);
 
@@ -230,6 +240,9 @@ int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE)
 		return set_core_reg(vcpu, reg);
 
+	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_FW)
+		return kvm_arm_set_fw_reg(vcpu, reg);
+
 	if (is_timer_reg(reg->id))
 		return set_timer_reg(vcpu, reg);
 

arch/arm/kvm/hyp/Makefile

@@ -7,6 +7,8 @@ ccflags-y += -fno-stack-protector -DDISABLE_BRANCH_PROFILING
 
 KVM=../../../../virt/kvm
 
+CFLAGS_ARMV7VE		   :=$(call cc-option, -march=armv7ve)
+
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
@@ -15,7 +17,10 @@ obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
 obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += vfp.o
 obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o
+CFLAGS_banked-sr.o	   += $(CFLAGS_ARMV7VE)
+
 obj-$(CONFIG_KVM_ARM_HOST) += entry.o
 obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
 obj-$(CONFIG_KVM_ARM_HOST) += switch.o
+CFLAGS_switch.o		   += $(CFLAGS_ARMV7VE)
 obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o

arch/arm/kvm/hyp/banked-sr.c

@@ -20,6 +20,10 @@
 
 #include <asm/kvm_hyp.h>
 
+/*
+ * gcc before 4.9 doesn't understand -march=armv7ve, so we have to
+ * trick the assembler.
+ */
 __asm__(".arch_extension     virt");
 
 void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt)

arch/arm/lib/csumpartialcopyuser.S

@@ -85,7 +85,11 @@
 		.pushsection .text.fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+		ldr	r5, [sp, #9*4]		@ *err_ptr
+#else
 		ldr	r5, [sp, #8*4]		@ *err_ptr
+#endif
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1

arch/arm/lib/getuser.S

@@ -38,6 +38,7 @@ ENTRY(__get_user_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_1)
+_ASM_NOKPROBE(__get_user_1)
 
 ENTRY(__get_user_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad
@@ -58,6 +59,7 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_2)
+_ASM_NOKPROBE(__get_user_2)
 
 ENTRY(__get_user_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad
@@ -65,6 +67,7 @@ ENTRY(__get_user_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_4)
+_ASM_NOKPROBE(__get_user_4)
 
 ENTRY(__get_user_8)
 	check_uaccess r0, 8, r1, r2, __get_user_bad8
@@ -78,6 +81,7 @@ ENTRY(__get_user_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_8)
+_ASM_NOKPROBE(__get_user_8)
 
 #ifdef __ARMEB__
 ENTRY(__get_user_32t_8)
@@ -91,6 +95,7 @@ ENTRY(__get_user_32t_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_32t_8)
+_ASM_NOKPROBE(__get_user_32t_8)
 
 ENTRY(__get_user_64t_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad8
@@ -98,6 +103,7 @@ ENTRY(__get_user_64t_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_1)
+_ASM_NOKPROBE(__get_user_64t_1)
 
 ENTRY(__get_user_64t_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad8
@@ -114,6 +120,7 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_2)
+_ASM_NOKPROBE(__get_user_64t_2)
 
 ENTRY(__get_user_64t_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad8
@@ -121,6 +128,7 @@ ENTRY(__get_user_64t_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_4)
+_ASM_NOKPROBE(__get_user_64t_4)
 #endif
 
 __get_user_bad8:
@@ -131,6 +139,8 @@ __get_user_bad:
 	ret	lr
 ENDPROC(__get_user_bad)
 ENDPROC(__get_user_bad8)
+_ASM_NOKPROBE(__get_user_bad)
+_ASM_NOKPROBE(__get_user_bad8)
 
 .pushsection __ex_table, "a"
 	.long	1b, __get_user_bad

arch/arm/mach-exynos/pm.c

@@ -276,11 +276,7 @@ abort:
 				goto fail;
 
 			call_firmware_op(cpu_boot, 1);
-
-			if (soc_is_exynos3250())
-				dsb_sev();
-			else
-				arch_send_wakeup_ipi_mask(cpumask_of(1));
+			dsb_sev();
 		}
 	}
 fail:

arch/arm/mach-mvebu/Kconfig

@@ -42,7 +42,7 @@ config MACH_ARMADA_375
 	depends on ARCH_MULTI_V7
 	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARMADA_375_CLK
 	select HAVE_ARM_SCU
@@ -58,7 +58,7 @@ config MACH_ARMADA_38X
 	bool "Marvell Armada 380/385 boards"
 	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK

arch/arm/mach-omap2/omap-secure.c

@@ -73,6 +73,27 @@ phys_addr_t omap_secure_ram_mempool_base(void)
 	return omap_secure_memblock_base;
 }
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+u32 omap3_save_secure_ram(void __iomem *addr, int size)
+{
+	u32 ret;
+	u32 param[5];
+
+	if (size != OMAP3_SAVE_SECURE_RAM_SZ)
+		return OMAP3_SAVE_SECURE_RAM_SZ;
+
+	param[0] = 4;		/* Number of arguments */
+	param[1] = __pa(addr);	/* Physical address for saving */
+	param[2] = 0;
+	param[3] = 1;
+	param[4] = 1;
+
+	ret = save_secure_ram_context(__pa(param));
+
+	return ret;
+}
+#endif
+
 /**
  * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls
  * @idx: The PPA API index

arch/arm/mach-omap2/omap-secure.h

@@ -31,6 +31,8 @@
 /* Maximum Secure memory storage size */
 #define OMAP_SECURE_RAM_STORAGE	(88 * SZ_1K)
 
+#define OMAP3_SAVE_SECURE_RAM_SZ	0x803F
+
 /* Secure low power HAL API index */
 #define OMAP4_HAL_SAVESECURERAM_INDEX	0x1a
 #define OMAP4_HAL_SAVEHW_INDEX		0x1b
@@ -65,6 +67,8 @@ extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
+extern u32 save_secure_ram_context(u32 args_pa);
+extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size);
 
 extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);

arch/arm/mach-omap2/pm.h

@@ -81,10 +81,6 @@ extern unsigned int omap3_do_wfi_sz;
 /* ... and its pointer from SRAM after copy */
 extern void (*omap3_do_wfi_sram)(void);
 
-/* save_secure_ram_context function pointer and size, for copy to SRAM */
-extern int save_secure_ram_context(u32 *addr);
-extern unsigned int save_secure_ram_context_sz;
-
 extern void omap3_save_scratchpad_contents(void);
 
 #define PM_RTA_ERRATUM_i608		(1 << 0)

arch/arm/mach-omap2/pm34xx.c

@@ -48,6 +48,7 @@
 #include "prm3xxx.h"
 #include "pm.h"
 #include "sdrc.h"
+#include "omap-secure.h"
 #include "sram.h"
 #include "control.h"
 #include "vc.h"
@@ -66,7 +67,6 @@ struct power_state {
 
 static LIST_HEAD(pwrst_list);
 
-static int (*_omap_save_secure_sram)(u32 *addr);
 void (*omap3_do_wfi_sram)(void);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
@@ -121,8 +121,8 @@ static void omap3_save_secure_ram_context(void)
 		 * will hang the system.
 		 */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-		ret = _omap_save_secure_sram((u32 *)(unsigned long)
-				__pa(omap3_secure_ram_storage));
+		ret = omap3_save_secure_ram(omap3_secure_ram_storage,
+					    OMAP3_SAVE_SECURE_RAM_SZ);
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
@@ -434,15 +434,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  *
  * The minimum set of functions is pushed to SRAM for execution:
  * - omap3_do_wfi for erratum i581 WA,
- * - save_secure_ram_context for security extensions.
  */
 void omap_push_sram_idle(void)
 {
 	omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
-
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
-		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
-				save_secure_ram_context_sz);
 }
 
 static void __init pm_errata_configure(void)
@@ -553,7 +548,7 @@ int __init omap3_pm_init(void)
 	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		omap3_secure_ram_storage =
-			kmalloc(0x803F, GFP_KERNEL);
+			kmalloc(OMAP3_SAVE_SECURE_RAM_SZ, GFP_KERNEL);
 		if (!omap3_secure_ram_storage)
 			pr_err("Memory allocation failed when allocating for secure sram context\n");
 

arch/arm/mach-omap2/prm33xx.c

@@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	return v;
 }
 
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
-	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 {
 	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
@@ -357,7 +346,6 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
 	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
 	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
 	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,

arch/arm/mach-omap2/sleep34xx.S

@@ -93,20 +93,13 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
 /*
- * Function to call rom code to save secure ram context. This gets
- * relocated to SRAM, so it can be all in .data section. Otherwise
- * we need to initialize api_params separately.
+ * Function to call rom code to save secure ram context.
+ *
+ * r0 = physical address of the parameters
  */
-	.data
-	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
-	adr	r3, api_params		@ r3 points to parameters
-	str	r0, [r3,#0x4]		@ r0 has sdram address
-	ldr	r12, high_mask
-	and	r3, r3, r12
-	ldr	r12, sram_phy_addr_mask
-	orr	r3, r3, r12
+	mov	r3, r0			@ physical address of parameters
 	mov	r0, #25			@ set service ID for PPA
 	mov	r12, r0			@ copy secure service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
@@ -120,18 +113,7 @@ ENTRY(save_secure_ram_context)
 	nop
 	nop
 	ldmfd	sp!, {r4 - r11, pc}
-	.align
-sram_phy_addr_mask:
-	.word	SRAM_BASE_P
-high_mask:
-	.word	0xffff
-api_params:
-	.word	0x4, 0x0, 0x0, 0x1, 0x1
 ENDPROC(save_secure_ram_context)
-ENTRY(save_secure_ram_context_sz)
-	.word	. - save_secure_ram_context
-
-	.text
 
 /*
  * ======================

arch/arm/plat-omap/include/plat/sram.h

@@ -5,13 +5,4 @@ void omap_map_sram(unsigned long start, unsigned long size,
 			unsigned long skip, int cached);
 void omap_sram_reset(void);
 
-extern void *omap_sram_push_address(unsigned long size);
-
-/* Macro to push a function to the internal SRAM, using the fncpy API */
-#define omap_sram_push(funcp, size) ({				\
-	typeof(&(funcp)) _res = NULL;				\
-	void *_sram_address = omap_sram_push_address(size);	\
-	if (_sram_address)					\
-		_res = fncpy(_sram_address, &(funcp), size);	\
-	_res;							\
-})
+extern void *omap_sram_push(void *funcp, unsigned long size);

arch/arm/plat-omap/sram.c

@@ -23,6 +23,7 @@
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
+#include <asm/set_memory.h>
 
 #include <asm/mach/map.h>
 
@@ -42,7 +43,7 @@ static void __iomem *omap_sram_ceil;
  * Note that fncpy requires the returned address to be aligned
  * to an 8-byte boundary.
  */
-void *omap_sram_push_address(unsigned long size)
+static void *omap_sram_push_address(unsigned long size)
 {
 	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
 
@@ -60,6 +61,30 @@ void *omap_sram_push_address(unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+	void *sram;
+	unsigned long base;
+	int pages;
+	void *dst = NULL;
+
+	sram = omap_sram_push_address(size);
+	if (!sram)
+		return NULL;
+
+	base = (unsigned long)sram & PAGE_MASK;
+	pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+	set_memory_rw(base, pages);
+
+	dst = fncpy(sram, funcp, size);
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
+
+	return dst;
+}
+
 /*
  * The SRAM context is lost during off-idle and stack
  * needs to be reset.
@@ -75,6 +100,9 @@ void omap_sram_reset(void)
 void __init omap_map_sram(unsigned long start, unsigned long size,
 				 unsigned long skip, int cached)
 {
+	unsigned long base;
+	int pages;
+
 	if (size == 0)
 		return;
 
@@ -95,4 +123,10 @@ void __init omap_map_sram(unsigned long start, unsigned long size,
 	 */
 	memset_io(omap_sram_base + omap_sram_skip, 0,
 		  omap_sram_size - omap_sram_skip);
+
+	base = (unsigned long)omap_sram_base;
+	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
 }

arch/arm/plat-orion/common.c

@@ -472,28 +472,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
-static __initdata struct mdio_board_info
-		  orion_ge00_switch_board_info;
+static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
+	.bus_id   = "orion-mii",
+	.modalias = "mv88e6085",
+};
 
 void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 {
-	struct mdio_board_info *bd;
 	unsigned int i;
 
 	if (!IS_BUILTIN(CONFIG_PHYLIB))
 		return;
 
-	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
-		if (!strcmp(d->port_names[i], "cpu"))
+	for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
+		if (!strcmp(d->port_names[i], "cpu")) {
+			d->netdev[i] = &orion_ge00.dev;
 			break;
+		}
+	}
 
-	bd = &orion_ge00_switch_board_info;
-	bd->bus_id = orion_ge00_mvmdio_bus_name;
-	bd->mdio_addr = d->sw_addr;
-	d->netdev[i] = &orion_ge00.dev;
-	strcpy(bd->modalias, "mv88e6085");
-	bd->platform_data = d;
+	orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
+	orion_ge00_switch_board_info.platform_data = d;
 
 	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }

arch/arm/probes/kprobes/opt-arm.c

@@ -165,13 +165,14 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 {
 	unsigned long flags;
 	struct kprobe *p = &op->kp;
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	struct kprobe_ctlblk *kcb;
 
 	/* Save skipped registers */
 	regs->ARM_pc = (unsigned long)op->kp.addr;
 	regs->ARM_ORIG_r0 = ~0UL;
 
 	local_irq_save(flags);
+	kcb = get_kprobe_ctlblk();
 
 	if (kprobe_running()) {
 		kprobes_inc_nmissed_count(&op->kp);
@@ -191,6 +192,7 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 
 	local_irq_restore(flags);
 }
+NOKPROBE_SYMBOL(optimized_callback)
 
 int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig)
 {

arch/arm/vfp/vfpmodule.c

@@ -648,7 +648,7 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
  */
 static int vfp_dying_cpu(unsigned int cpu)
 {
-	vfp_force_reload(cpu, current_thread_info());
+	vfp_current_hw_state[cpu] = NULL;
 	return 0;
 }
 

arch/arm64/Kconfig

@@ -443,6 +443,20 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1024718
+	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
+	default y
+	help
+	  This option adds work around for Arm Cortex-A55 Erratum 1024718.
+
+	  Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect
+	  update of the hardware dirty bit when the DBM/AP bits are updated
+	  without a break-before-make. The work around is to disable the usage
+	  of hardware DBM locally on the affected cores. CPUs not affected by
+	  erratum will continue to use the feature.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -276,7 +276,7 @@
 	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	max-frequency = <200000000>;
+	max-frequency = <100000000>;
 	non-removable;
 	disable-wp;
 	cap-mmc-highspeed;

arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts

@@ -228,8 +228,11 @@
 
 &cpm_eth0 {
 	status = "okay";
+	/* Network PHY */
 	phy = <&phy0>;
 	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cpm_comphy4 0>;
 };
 
 &cpm_sata0 {
@@ -263,15 +266,21 @@
 
 &cps_eth0 {
 	status = "okay";
+	/* Network PHY */
 	phy = <&phy8>;
 	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cps_comphy4 0>;
 };
 
 &cps_eth1 {
 	/* CPS Lane 0 - J5 (Gigabit RJ45) */
 	status = "okay";
+	/* Network PHY */
 	phy = <&ge_phy>;
 	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cps_comphy0 1>;
 };
 
 &cps_pinctrl {

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -111,6 +111,44 @@
 				};
 			};
 
+			cpm_comphy: phy@120000 {
+				compatible = "marvell,comphy-cp110";
+				reg = <0x120000 0x6000>;
+				marvell,system-controller = <&cpm_syscon0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				cpm_comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				cpm_comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				cpm_comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+
+				cpm_comphy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <1>;
+				};
+
+				cpm_comphy4: phy@4 {
+					reg = <4>;
+					#phy-cells = <1>;
+				};
+
+				cpm_comphy5: phy@5 {
+					reg = <5>;
+					#phy-cells = <1>;
+				};
+			};
+
 			cpm_mdio: mdio@12a200 {
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -111,6 +111,44 @@
 				};
 			};
 
+			cps_comphy: phy@120000 {
+				compatible = "marvell,comphy-cp110";
+				reg = <0x120000 0x6000>;
+				marvell,system-controller = <&cps_syscon0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				cps_comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				cps_comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				cps_comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+
+				cps_comphy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <1>;
+				};
+
+				cps_comphy4: phy@4 {
+					reg = <4>;
+					#phy-cells = <1>;
+				};
+
+				cps_comphy5: phy@5 {
+					reg = <5>;
+					#phy-cells = <1>;
+				};
+			};
+
 			cps_mdio: mdio@12a200 {
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -81,6 +81,7 @@
 			reg = <0x000>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -97,6 +98,7 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@101 {

arch/arm64/boot/dts/renesas/salvator-common.dtsi

@@ -264,6 +264,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
 

arch/arm64/boot/dts/renesas/ulcb.dtsi

@@ -145,7 +145,6 @@
 &avb {
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
-	renesas,no-ether-link;
 	phy-handle = <&phy0>;
 	status = "okay";
 

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -155,17 +155,6 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 0>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		status = "okay";
-	};
 };
 
 &cpu_b0 {

arch/arm64/crypto/Makefile

@@ -24,7 +24,7 @@ obj-$(CONFIG_CRYPTO_CRC32_ARM64_CE) += crc32-ce.o
 crc32-ce-y:= crc32-ce-core.o crc32-ce-glue.o
 
 obj-$(CONFIG_CRYPTO_AES_ARM64_CE) += aes-ce-cipher.o
-CFLAGS_aes-ce-cipher.o += -march=armv8-a+crypto
+aes-ce-cipher-y := aes-ce-core.o aes-ce-glue.o
 
 obj-$(CONFIG_CRYPTO_AES_ARM64_CE_CCM) += aes-ce-ccm.o
 aes-ce-ccm-y := aes-ce-ccm-glue.o aes-ce-ccm-core.o
@@ -58,6 +58,7 @@ CFLAGS_aes-glue-ce.o	:= -DUSE_V8_CRYPTO_EXTENSIONS
 $(obj)/aes-glue-%.o: $(src)/aes-glue.c FORCE
 	$(call if_changed_rule,cc_o_c)
 
+ifdef REGENERATE_ARM64_CRYPTO
 quiet_cmd_perlasm = PERLASM $@
       cmd_perlasm = $(PERL) $(<) void $(@)
 
@@ -66,5 +67,6 @@ $(src)/sha256-core.S_shipped: $(src)/sha512-armv8.pl
 
 $(src)/sha512-core.S_shipped: $(src)/sha512-armv8.pl
 	$(call cmd,perlasm)
+endif
 
 .PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S

arch/arm64/crypto/aes-ce-core.S

@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.arch		armv8-a+crypto
+
+ENTRY(__aes_ce_encrypt)
+	sub		w3, w3, #2
+	ld1		{v0.16b}, [x2]
+	ld1		{v1.4s}, [x0], #16
+	cmp		w3, #10
+	bmi		0f
+	bne		3f
+	mov		v3.16b, v1.16b
+	b		2f
+0:	mov		v2.16b, v1.16b
+	ld1		{v3.4s}, [x0], #16
+1:	aese		v0.16b, v2.16b
+	aesmc		v0.16b, v0.16b
+2:	ld1		{v1.4s}, [x0], #16
+	aese		v0.16b, v3.16b
+	aesmc		v0.16b, v0.16b
+3:	ld1		{v2.4s}, [x0], #16
+	subs		w3, w3, #3
+	aese		v0.16b, v1.16b
+	aesmc		v0.16b, v0.16b
+	ld1		{v3.4s}, [x0], #16
+	bpl		1b
+	aese		v0.16b, v2.16b
+	eor		v0.16b, v0.16b, v3.16b
+	st1		{v0.16b}, [x1]
+	ret
+ENDPROC(__aes_ce_encrypt)
+
+ENTRY(__aes_ce_decrypt)
+	sub		w3, w3, #2
+	ld1		{v0.16b}, [x2]
+	ld1		{v1.4s}, [x0], #16
+	cmp		w3, #10
+	bmi		0f
+	bne		3f
+	mov		v3.16b, v1.16b
+	b		2f
+0:	mov		v2.16b, v1.16b
+	ld1		{v3.4s}, [x0], #16
+1:	aesd		v0.16b, v2.16b
+	aesimc		v0.16b, v0.16b
+2:	ld1		{v1.4s}, [x0], #16
+	aesd		v0.16b, v3.16b
+	aesimc		v0.16b, v0.16b
+3:	ld1		{v2.4s}, [x0], #16
+	subs		w3, w3, #3
+	aesd		v0.16b, v1.16b
+	aesimc		v0.16b, v0.16b
+	ld1		{v3.4s}, [x0], #16
+	bpl		1b
+	aesd		v0.16b, v2.16b
+	eor		v0.16b, v0.16b, v3.16b
+	st1		{v0.16b}, [x1]
+	ret
+ENDPROC(__aes_ce_decrypt)
+
+/*
+ * __aes_ce_sub() - use the aese instruction to perform the AES sbox
+ *                  substitution on each byte in 'input'
+ */
+ENTRY(__aes_ce_sub)
+	dup		v1.4s, w0
+	movi		v0.16b, #0
+	aese		v0.16b, v1.16b
+	umov		w0, v0.s[0]
+	ret
+ENDPROC(__aes_ce_sub)
+
+ENTRY(__aes_ce_invert)
+	ld1		{v0.4s}, [x1]
+	aesimc		v1.16b, v0.16b
+	st1		{v1.4s}, [x0]
+	ret
+ENDPROC(__aes_ce_invert)

arch/arm64/crypto/aes-ce-glue.c

@@ -29,6 +29,13 @@ struct aes_block {
 	u8 b[AES_BLOCK_SIZE];
 };
 
+asmlinkage void __aes_ce_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+asmlinkage void __aes_ce_decrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+
+asmlinkage u32 __aes_ce_sub(u32 l);
+asmlinkage void __aes_ce_invert(struct aes_block *out,
+				const struct aes_block *in);
+
 static int num_rounds(struct crypto_aes_ctx *ctx)
 {
 	/*
@@ -44,10 +51,6 @@ static int num_rounds(struct crypto_aes_ctx *ctx)
 static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 {
 	struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-	struct aes_block *out = (struct aes_block *)dst;
-	struct aes_block const *in = (struct aes_block *)src;
-	void *dummy0;
-	int dummy1;
 
 	if (!may_use_simd()) {
 		__aes_arm64_encrypt(ctx->key_enc, dst, src, num_rounds(ctx));
@@ -55,49 +58,13 @@ static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 	}
 
 	kernel_neon_begin();
-
-	__asm__("	ld1	{v0.16b}, %[in]			;"
-		"	ld1	{v1.4s}, [%[key]], #16		;"
-		"	cmp	%w[rounds], #10			;"
-		"	bmi	0f				;"
-		"	bne	3f				;"
-		"	mov	v3.16b, v1.16b			;"
-		"	b	2f				;"
-		"0:	mov	v2.16b, v1.16b			;"
-		"	ld1	{v3.4s}, [%[key]], #16		;"
-		"1:	aese	v0.16b, v2.16b			;"
-		"	aesmc	v0.16b, v0.16b			;"
-		"2:	ld1	{v1.4s}, [%[key]], #16		;"
-		"	aese	v0.16b, v3.16b			;"
-		"	aesmc	v0.16b, v0.16b			;"
-		"3:	ld1	{v2.4s}, [%[key]], #16		;"
-		"	subs	%w[rounds], %w[rounds], #3	;"
-		"	aese	v0.16b, v1.16b			;"
-		"	aesmc	v0.16b, v0.16b			;"
-		"	ld1	{v3.4s}, [%[key]], #16		;"
-		"	bpl	1b				;"
-		"	aese	v0.16b, v2.16b			;"
-		"	eor	v0.16b, v0.16b, v3.16b		;"
-		"	st1	{v0.16b}, %[out]		;"
-
-	:	[out]		"=Q"(*out),
-		[key]		"=r"(dummy0),
-		[rounds]	"=r"(dummy1)
-	:	[in]		"Q"(*in),
-				"1"(ctx->key_enc),
-				"2"(num_rounds(ctx) - 2)
-	:	"cc");
-
+	__aes_ce_encrypt(ctx->key_enc, dst, src, num_rounds(ctx));
 	kernel_neon_end();
 }
 
 static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 {
 	struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-	struct aes_block *out = (struct aes_block *)dst;
-	struct aes_block const *in = (struct aes_block *)src;
-	void *dummy0;
-	int dummy1;
 
 	if (!may_use_simd()) {
 		__aes_arm64_decrypt(ctx->key_dec, dst, src, num_rounds(ctx));
@@ -105,62 +72,10 @@ static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 	}
 
 	kernel_neon_begin();
-
-	__asm__("	ld1	{v0.16b}, %[in]			;"
-		"	ld1	{v1.4s}, [%[key]], #16		;"
-		"	cmp	%w[rounds], #10			;"
-		"	bmi	0f				;"
-		"	bne	3f				;"
-		"	mov	v3.16b, v1.16b			;"
-		"	b	2f				;"
-		"0:	mov	v2.16b, v1.16b			;"
-		"	ld1	{v3.4s}, [%[key]], #16		;"
-		"1:	aesd	v0.16b, v2.16b			;"
-		"	aesimc	v0.16b, v0.16b			;"
-		"2:	ld1	{v1.4s}, [%[key]], #16		;"
-		"	aesd	v0.16b, v3.16b			;"
-		"	aesimc	v0.16b, v0.16b			;"
-		"3:	ld1	{v2.4s}, [%[key]], #16		;"
-		"	subs	%w[rounds], %w[rounds], #3	;"
-		"	aesd	v0.16b, v1.16b			;"
-		"	aesimc	v0.16b, v0.16b			;"
-		"	ld1	{v3.4s}, [%[key]], #16		;"
-		"	bpl	1b				;"
-		"	aesd	v0.16b, v2.16b			;"
-		"	eor	v0.16b, v0.16b, v3.16b		;"
-		"	st1	{v0.16b}, %[out]		;"
-
-	:	[out]		"=Q"(*out),
-		[key]		"=r"(dummy0),
-		[rounds]	"=r"(dummy1)
-	:	[in]		"Q"(*in),
-				"1"(ctx->key_dec),
-				"2"(num_rounds(ctx) - 2)
-	:	"cc");
-
+	__aes_ce_decrypt(ctx->key_dec, dst, src, num_rounds(ctx));
 	kernel_neon_end();
 }
 
-/*
- * aes_sub() - use the aese instruction to perform the AES sbox substitution
- *             on each byte in 'input'
- */
-static u32 aes_sub(u32 input)
-{
-	u32 ret;
-
-	__asm__("dup	v1.4s, %w[in]		;"
-		"movi	v0.16b, #0		;"
-		"aese	v0.16b, v1.16b		;"
-		"umov	%w[out], v0.4s[0]	;"
-
-	:	[out]	"=r"(ret)
-	:	[in]	"r"(input)
-	:		"v0","v1");
-
-	return ret;
-}
-
 int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
 		     unsigned int key_len)
 {
@@ -189,7 +104,7 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
 		u32 *rki = ctx->key_enc + (i * kwords);
 		u32 *rko = rki + kwords;
 
-		rko[0] = ror32(aes_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
+		rko[0] = ror32(__aes_ce_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
 		rko[1] = rko[0] ^ rki[1];
 		rko[2] = rko[1] ^ rki[2];
 		rko[3] = rko[2] ^ rki[3];
@@ -202,7 +117,7 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
 		} else if (key_len == AES_KEYSIZE_256) {
 			if (i >= 6)
 				break;
-			rko[4] = aes_sub(rko[3]) ^ rki[4];
+			rko[4] = __aes_ce_sub(rko[3]) ^ rki[4];
 			rko[5] = rko[4] ^ rki[5];
 			rko[6] = rko[5] ^ rki[6];
 			rko[7] = rko[6] ^ rki[7];
@@ -221,13 +136,7 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
 
 	key_dec[0] = key_enc[j];
 	for (i = 1, j--; j > 0; i++, j--)
-		__asm__("ld1	{v0.4s}, %[in]		;"
-			"aesimc	v1.16b, v0.16b		;"
-			"st1	{v1.4s}, %[out]	;"
-
-		:	[out]	"=Q"(key_dec[i])
-		:	[in]	"Q"(key_enc[j])
-		:		"v0","v1");
+		__aes_ce_invert(key_dec + i, key_enc + j);
 	key_dec[i] = key_enc[0];
 
 	kernel_neon_end();

arch/arm64/include/asm/assembler.h

@@ -25,6 +25,7 @@
 
 #include <asm/asm-offsets.h>
 #include <asm/cpufeature.h>
+#include <asm/cputype.h>
 #include <asm/page.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/ptrace.h>
@@ -495,4 +496,43 @@ alternative_endif
 	and	\phys, \pte, #(((1 << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT)
 	.endm
 
+/*
+ * Check the MIDR_EL1 of the current CPU for a given model and a range of
+ * variant/revision. See asm/cputype.h for the macros used below.
+ *
+ *	model:		MIDR_CPU_MODEL of CPU
+ *	rv_min:		Minimum of MIDR_CPU_VAR_REV()
+ *	rv_max:		Maximum of MIDR_CPU_VAR_REV()
+ *	res:		Result register.
+ *	tmp1, tmp2, tmp3: Temporary registers
+ *
+ * Corrupts: res, tmp1, tmp2, tmp3
+ * Returns:  0, if the CPU id doesn't match. Non-zero otherwise
+ */
+	.macro	cpu_midr_match model, rv_min, rv_max, res, tmp1, tmp2, tmp3
+	mrs		\res, midr_el1
+	mov_q		\tmp1, (MIDR_REVISION_MASK | MIDR_VARIANT_MASK)
+	mov_q		\tmp2, MIDR_CPU_MODEL_MASK
+	and		\tmp3, \res, \tmp2	// Extract model
+	and		\tmp1, \res, \tmp1	// rev & variant
+	mov_q		\tmp2, \model
+	cmp		\tmp3, \tmp2
+	cset		\res, eq
+	cbz		\res, .Ldone\@		// Model matches ?
+
+	.if (\rv_min != 0)			// Skip min check if rv_min == 0
+	mov_q		\tmp3, \rv_min
+	cmp		\tmp1, \tmp3
+	cset		\res, ge
+	.endif					// \rv_min != 0
+	/* Skip rv_max check if rv_min == rv_max && rv_min != 0 */
+	.if ((\rv_min != \rv_max) || \rv_min == 0)
+	mov_q		\tmp2, \rv_max
+	cmp		\tmp1, \tmp2
+	cset		\tmp2, le
+	and		\res, \res, \tmp2
+	.endif
+.Ldone\@:
+	.endm
+
 #endif	/* __ASM_ASSEMBLER_H */

arch/arm64/include/asm/cputype.h

@@ -78,6 +78,7 @@
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
+#define ARM_CPU_PART_CORTEX_A55		0xD05
 #define ARM_CPU_PART_CORTEX_A57		0xD07
 #define ARM_CPU_PART_CORTEX_A72		0xD08
 #define ARM_CPU_PART_CORTEX_A53		0xD03
@@ -98,6 +99,7 @@
 #define QCOM_CPU_PART_KRYO		0x200
 
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
+#define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
 #define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73)

arch/arm64/include/asm/kvm_host.h

@@ -71,6 +71,9 @@ struct kvm_arch {
 
 	/* Interrupt controller */
 	struct vgic_dist	vgic;
+
+	/* Mandated version of PSCI */
+	u32 psci_version;
 };
 
 #define KVM_NR_MEM_OBJS     40

arch/arm64/include/asm/kvm_mmu.h

@@ -309,6 +309,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
 	return (cpuid_feature_extract_unsigned_field(reg, ID_AA64MMFR1_VMIDBITS_SHIFT) == 2) ? 16 : 8;
 }
 
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+				      gpa_t gpa, void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_read_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
 #include <asm/mmu.h>
 

arch/arm64/include/asm/spinlock.h

@@ -89,8 +89,8 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 	"	cbnz	%w1, 1f\n"
 	"	add	%w1, %w0, %3\n"
 	"	casa	%w0, %w1, %2\n"
-	"	and	%w1, %w1, #0xffff\n"
-	"	eor	%w1, %w1, %w0, lsr #16\n"
+	"	sub	%w1, %w1, %3\n"
+	"	eor	%w1, %w1, %w0\n"
 	"1:")
 	: "=&r" (lockval), "=&r" (tmp), "+Q" (*lock)
 	: "I" (1 << TICKET_SHIFT)

arch/arm64/include/uapi/asm/kvm.h

@@ -200,6 +200,12 @@ struct kvm_arch_memory_slot {
 #define KVM_REG_ARM_TIMER_CNT		ARM64_SYS_REG(3, 3, 14, 3, 2)
 #define KVM_REG_ARM_TIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 0, 2)
 
+/* KVM-as-firmware specific pseudo-registers */
+#define KVM_REG_ARM_FW			(0x0014 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_REG(r)		(KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
+					 KVM_REG_ARM_FW | ((r) & 0xffff))
+#define KVM_REG_ARM_PSCI_VERSION	KVM_REG_ARM_FW_REG(0)
+
 /* Device Control API: ARM VGIC */
 #define KVM_DEV_ARM_VGIC_GRP_ADDR	0
 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1

arch/arm64/kernel/cpufeature.c

@@ -175,9 +175,11 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
 };
 
 static const struct arm64_ftr_bits ftr_ctr[] = {
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1),	/* RAO */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1),		/* RES1 */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 29, 1, 1),	/* DIC */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 28, 1, 1),	/* IDC */
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0),	/* CWG */
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),	/* ERG */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, 20, 4, 0),	/* ERG */
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1),	/* DminLine */
 	/*
 	 * Linux can handle differing I-cache policies. Userspace JITs will

arch/arm64/kernel/traps.c

@@ -56,7 +56,7 @@ static const char *handler[]= {
 	"Error"
 };
 
-int show_unhandled_signals = 1;
+int show_unhandled_signals = 0;
 
 /*
  * Dump out the contents of some kernel memory nicely...
@@ -573,14 +573,6 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs)
 	}
 #endif
 
-	if (show_unhandled_signals_ratelimited()) {
-		pr_info("%s[%d]: syscall %d\n", current->comm,
-			task_pid_nr(current), regs->syscallno);
-		dump_instr("", regs);
-		if (user_mode(regs))
-			__show_regs(regs);
-	}
-
 	return sys_ni_syscall();
 }
 

arch/arm64/kvm/guest.c

@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
+#include <kvm/arm_psci.h>
 #include <asm/cputype.h>
 #include <linux/uaccess.h>
 #include <asm/kvm.h>
@@ -205,7 +206,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu)
 {
 	return num_core_regs() + kvm_arm_num_sys_reg_descs(vcpu)
-                + NUM_TIMER_REGS;
+		+ kvm_arm_get_fw_num_regs(vcpu)	+ NUM_TIMER_REGS;
 }
 
 /**
@@ -225,6 +226,11 @@ int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 		uindices++;
 	}
 
+	ret = kvm_arm_copy_fw_reg_indices(vcpu, uindices);
+	if (ret)
+		return ret;
+	uindices += kvm_arm_get_fw_num_regs(vcpu);
+
 	ret = copy_timer_indices(vcpu, uindices);
 	if (ret)
 		return ret;
@@ -243,6 +249,9 @@ int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE)
 		return get_core_reg(vcpu, reg);
 
+	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_FW)
+		return kvm_arm_get_fw_reg(vcpu, reg);
+
 	if (is_timer_reg(reg->id))
 		return get_timer_reg(vcpu, reg);
 
@@ -259,6 +268,9 @@ int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE)
 		return set_core_reg(vcpu, reg);
 
+	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_FW)
+		return kvm_arm_set_fw_reg(vcpu, reg);
+
 	if (is_timer_reg(reg->id))
 		return set_timer_reg(vcpu, reg);
 

arch/arm64/mm/mmu.c

@@ -107,7 +107,7 @@ static bool pgattr_change_is_safe(u64 old, u64 new)
 	 * The following mapping attributes may be updated in live
 	 * kernel mappings without the need for break-before-make.
 	 */
-	static const pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE;
+	static const pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE | PTE_NG;
 
 	/* creating or taking down mappings is always safe */
 	if (old == 0 || new == 0)
@@ -117,9 +117,9 @@ static bool pgattr_change_is_safe(u64 old, u64 new)
 	if ((old | new) & PTE_CONT)
 		return false;
 
-	/* Transitioning from Global to Non-Global is safe */
-	if (((old ^ new) == PTE_NG) && (new & PTE_NG))
-		return true;
+	/* Transitioning from Non-Global to Global is unsafe */
+	if (old & ~new & PTE_NG)
+		return false;
 
 	return ((old ^ new) & ~mask) == 0;
 }
@@ -937,3 +937,13 @@ int pmd_clear_huge(pmd_t *pmd)
 	pmd_clear(pmd);
 	return 1;
 }
+
+int pud_free_pmd_page(pud_t *pud)
+{
+	return pud_none(*pud);
+}
+
+int pmd_free_pte_page(pmd_t *pmd)
+{
+	return pmd_none(*pmd);
+}

arch/arm64/mm/proc.S

@@ -155,7 +155,7 @@ ENDPROC(cpu_do_switch_mm)
 
 .macro	__idmap_cpu_set_reserved_ttbr1, tmp1, tmp2
 	adrp	\tmp1, empty_zero_page
-	msr	ttbr1_el1, \tmp2
+	msr	ttbr1_el1, \tmp1
 	isb
 	tlbi	vmalle1
 	dsb	nsh
@@ -438,6 +438,11 @@ ENTRY(__cpu_setup)
 	cbz	x9, 2f
 	cmp	x9, #2
 	b.lt	1f
+#ifdef CONFIG_ARM64_ERRATUM_1024718
+	/* Disable hardware DBM on Cortex-A55 r0p0, r0p1 & r1p0 */
+	cpu_midr_match MIDR_CORTEX_A55, MIDR_CPU_VAR_REV(0, 0), MIDR_CPU_VAR_REV(1, 0), x1, x2, x3, x4
+	cbnz	x1, 1f
+#endif
 	orr	x10, x10, #TCR_HD		// hardware Dirty flag update
 1:	orr	x10, x10, #TCR_HA		// hardware Access flag update
 2:

arch/arm64/net/bpf_jit_comp.c

@@ -238,8 +238,9 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	off = offsetof(struct bpf_array, map.max_entries);
 	emit_a64_mov_i64(tmp, off, ctx);
 	emit(A64_LDR32(tmp, r2, tmp), ctx);
+	emit(A64_MOV(0, r3, r3), ctx);
 	emit(A64_CMP(0, r3, tmp), ctx);
-	emit(A64_B_(A64_COND_GE, jmp_offset), ctx);
+	emit(A64_B_(A64_COND_CS, jmp_offset), ctx);
 
 	/* if (tail_call_cnt > MAX_TAIL_CALL_CNT)
 	 *     goto out;
@@ -247,7 +248,7 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	 */
 	emit_a64_mov_i64(tmp, MAX_TAIL_CALL_CNT, ctx);
 	emit(A64_CMP(1, tcc, tmp), ctx);
-	emit(A64_B_(A64_COND_GT, jmp_offset), ctx);
+	emit(A64_B_(A64_COND_HI, jmp_offset), ctx);
 	emit(A64_ADD_I(1, tcc, tcc, 1), ctx);
 
 	/* prog = array->ptrs[index];

arch/h8300/include/asm/byteorder.h

@@ -2,7 +2,6 @@
 #ifndef __H8300_BYTEORDER_H__
 #define __H8300_BYTEORDER_H__
 
-#define __BIG_ENDIAN __ORDER_BIG_ENDIAN__
 #include <linux/byteorder/big_endian.h>
 
 #endif

arch/ia64/kernel/time.c

@@ -88,7 +88,7 @@ void vtime_flush(struct task_struct *tsk)
 	}
 
 	if (ti->softirq_time) {
-		delta = cycle_to_nsec(ti->softirq_time));
+		delta = cycle_to_nsec(ti->softirq_time);
 		account_system_index_time(tsk, delta, CPUTIME_SOFTIRQ);
 	}
 

arch/m32r/Kconfig

@@ -196,8 +196,8 @@ config TIMER_DIVIDE
 	default "128"
 
 config CPU_BIG_ENDIAN
-        bool "Generate big endian code"
-	default n
+	bool
+	default !CPU_LITTLE_ENDIAN
 
 config CPU_LITTLE_ENDIAN
         bool "Generate little endian code"

arch/m68k/kernel/vmlinux-nommu.lds

@@ -45,6 +45,8 @@ SECTIONS {
 	.text : {
 		HEAD_TEXT
 		TEXT_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		SCHED_TEXT
 		CPUIDLE_TEXT
 		LOCK_TEXT

arch/m68k/kernel/vmlinux-std.lds

@@ -16,6 +16,8 @@ SECTIONS
   .text : {
 	HEAD_TEXT
 	TEXT_TEXT
+	IRQENTRY_TEXT
+	SOFTIRQENTRY_TEXT
 	SCHED_TEXT
 	CPUIDLE_TEXT
 	LOCK_TEXT

arch/m68k/kernel/vmlinux-sun3.lds

@@ -16,6 +16,8 @@ SECTIONS
   .text : {
 	HEAD_TEXT
 	TEXT_TEXT
+	IRQENTRY_TEXT
+	SOFTIRQENTRY_TEXT
 	SCHED_TEXT
 	CPUIDLE_TEXT
 	LOCK_TEXT

arch/microblaze/Kconfig.platform

@@ -20,6 +20,7 @@ config OPT_LIB_FUNCTION
 config OPT_LIB_ASM
 	bool "Optimalized lib function ASM"
 	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+	depends on CPU_BIG_ENDIAN
 	default n
 	help
 	  Allows turn on optimalized library function (memcpy and memmove).

arch/microblaze/Makefile

@@ -36,16 +36,21 @@ endif
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
-CPUFLAGS-$(CONFIG_BIG_ENDIAN) += -mbig-endian
-CPUFLAGS-$(CONFIG_LITTLE_ENDIAN) += -mlittle-endian
+
+ifdef CONFIG_CPU_BIG_ENDIAN
+KBUILD_CFLAGS += -mbig-endian
+KBUILD_AFLAGS += -mbig-endian
+LD += -EB
+else
+KBUILD_CFLAGS += -mlittle-endian
+KBUILD_AFLAGS += -mlittle-endian
+LD += -EL
+endif
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
 # r31 holds current when in kernel mode
-KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
-
-LDFLAGS		:=
-LDFLAGS_vmlinux	:=
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 head-y := arch/microblaze/kernel/head.o
 libs-y += arch/microblaze/lib/

arch/microblaze/lib/fastcopy.S

@@ -29,10 +29,6 @@
  *	between mem locations with size of xfer spec'd in bytes
  */
 
-#ifdef __MICROBLAZEEL__
-#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM.
-#endif
-
 #include <linux/linkage.h>
 	.text
 	.globl	memcpy