commit c342690411 upstream.
When reboot system, no power cycles, firmware is already downloaded,
return -EIO will break driver as error:
mt7921e: probe of 0000:03:00.0 failed with error -5
Skip firmware download and continue to probe.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 1c099ab447 ("mt76: mt7921: add MCU support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b43c8909be upstream.
If an UDP packet enters the GRO engine but is not eligible
for aggregation and is not targeting an UDP tunnel,
udp_gro_receive() will not set the flush bit, and packet
could delayed till the next napi flush.
Fix the issue ensuring non GROed packets traverse
skb_gro_flush_final().
Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de>
Fixes: 18f25dc399 ("udp: skip L4 aggregation for UDP tunnel packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 187a002b07 upstream.
scmi_resp_sensor_reading_complete structure is meant to represent an
SCMI asynchronous reading complete message. The readings field with
a 64bit type forces padding and breaks reads in scmi_sensor_reading_get.
Split it in two adjacent 32bit readings_low/high subfields to avoid the
padding within the structure. Alternatively we could to mark the structure
packed.
Link: https://lore.kernel.org/r/20210628170042.34105-1-cristian.marussi@arm.com
Fixes: e2083d3673 ("firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f263a81451 upstream.
Subprograms are calling map_poke_track(), but on program release there is no
hook to call map_poke_untrack(). However, on program release, the aux memory
(and poke descriptor table) is freed even though we still have a reference to
it in the element list of the map aux data. When we run map_poke_run(), we then
end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run():
[...]
[ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e
[ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337
[ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399
[ 402.824715] Call Trace:
[ 402.824719] dump_stack+0x93/0xc2
[ 402.824727] print_address_description.constprop.0+0x1a/0x140
[ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824744] kasan_report.cold+0x7c/0xd8
[ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824757] prog_array_map_poke_run+0xc2/0x34e
[ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0
[...]
The elements concerned are walked as follows:
for (i = 0; i < elem->aux->size_poke_tab; i++) {
poke = &elem->aux->poke_tab[i];
[...]
The access to size_poke_tab is a 4 byte read, verified by checking offsets
in the KASAN dump:
[ 402.825004] The buggy address belongs to the object at ffff8881905a7800
which belongs to the cache kmalloc-1k of size 1024
[ 402.825008] The buggy address is located 320 bytes inside of
1024-byte region [ffff8881905a7800, ffff8881905a7c00)
The pahole output of bpf_prog_aux:
struct bpf_prog_aux {
[...]
/* --- cacheline 5 boundary (320 bytes) --- */
u32 size_poke_tab; /* 320 4 */
[...]
In general, subprograms do not necessarily manage their own data structures.
For example, BTF func_info and linfo are just pointers to the main program
structure. This allows reference counting and cleanup to be done on the latter
which simplifies their management a bit. The aux->poke_tab struct, however,
did not follow this logic. The initial proposed fix for this use-after-free
bug further embedded poke data tracking into the subprogram with proper
reference counting. However, Daniel and Alexei questioned why we were treating
these objects special; I agree, its unnecessary. The fix here removes the per
subprogram poke table allocation and map tracking and instead simply points
the aux->poke_tab pointer at the main programs poke table. This way, map
tracking is simplified to the main program and we do not need to manage them
per subprogram.
This also means, bpf_prog_free_deferred(), which unwinds the program reference
counting and kfrees objects, needs to ensure that we don't try to double free
the poke_tab when free'ing the subprog structures. This is easily solved by
NULL'ing the poke_tab pointer. The second detail is to ensure that per
subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do
this, we add a pointer in the poke structure to point at the subprogram value
so JITs can easily check while walking the poke_tab structure if the current
entry belongs to the current program. The aux pointer is stable and therefore
suitable for such comparison. On the jit_subprogs() error path, we omit
cleaning up the poke->aux field because these are only ever referenced from
the JIT side, but on error we will never make it to the JIT, so its fine to
leave them dangling. Removing these pointers would complicate the error path
for no reason. However, we do need to untrack all poke descriptors from the
main program as otherwise they could race with the freeing of JIT memory from
the subprograms. Lastly, a748c6975d ("bpf: propagate poke descriptors to
subprograms") had an off-by-one on the subprogram instruction index range
check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'.
However, subprog_end is the next subprogram's start instruction.
Fixes: a748c6975d ("bpf: propagate poke descriptors to subprograms")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-2-john.fastabend@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d719254c1 upstream.
make[2]: *** No rule to make target 'install'. Stop.
make[1]: *** [Makefile:122: runqslower_install] Error 2
make: *** [Makefile:116: bpf_install] Error 2
There is no rule for target 'install' in tools/bpf/runqslower/Makefile,
and there is no need to install it, so just remove 'runqslower_install'.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210628030409.3459095-1-liwei391@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 358ed62420 upstream.
sk_wmem_schedule makes sure that sk_forward_alloc has enough
bytes for charging that is going to be done by sk_mem_charge.
In the transmit zerocopy path, there is sk_mem_charge but there was
no call to sk_wmem_schedule. This change adds that call.
Without this call to sk_wmem_schedule, sk_forward_alloc can go
negetive which is a bug because sk_forward_alloc is a per-socket
space that has been forward charged so this can't be negative.
Fixes: f214f915e7 ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Talal Ahmad <talalahmad@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7bb4b8903 upstream.
While TCP stack scales reasonably well, there is still one part that
can be used to DDOS it.
IPv6 Packet too big messages have to lookup/insert a new route,
and if abused by attackers, can easily put hosts under high stress,
with many cpus contending on a spinlock while one is stuck in fib6_run_gc()
ip6_protocol_deliver_rcu()
icmpv6_rcv()
icmpv6_notify()
tcp_v6_err()
tcp_v6_mtu_reduced()
inet6_csk_update_pmtu()
ip6_rt_update_pmtu()
__ip6_rt_update_pmtu()
ip6_rt_cache_alloc()
ip6_dst_alloc()
dst_alloc()
ip6_dst_gc()
fib6_run_gc()
spin_lock_bh() ...
Some of our servers have been hit by malicious ICMPv6 packets
trying to _increase_ the MTU/MSS of TCP flows.
We believe these ICMPv6 packets are a result of a bug in one ISP stack,
since they were blindly sent back for _every_ (small) packet sent to them.
These packets are for one TCP flow:
09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
TCP stack can filter some silly requests :
1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err()
2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS.
This tests happen before the IPv6 routing stack is entered, thus
removing the potential contention and route exhaustion.
Note that IPv6 stack was performing these checks, but too late
(ie : after the route has been added, and after the potential
garbage collect war)
v2: fix typo caught by Martin, thanks !
v3: exports tcp_mtu_to_mss(), caught by David, thanks !
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be5d1b61a2 upstream.
This commit fixes a bug (found by syzkaller) that could cause spurious
double-initializations for congestion control modules, which could cause
memory leaks or other problems for congestion control modules (like CDG)
that allocate memory in their init functions.
The buggy scenario constructed by syzkaller was something like:
(1) create a TCP socket
(2) initiate a TFO connect via sendto()
(3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION),
which calls:
tcp_set_congestion_control() ->
tcp_reinit_congestion_control() ->
tcp_init_congestion_control()
(4) receive ACK, connection is established, call tcp_init_transfer(),
set icsk_ca_initialized=0 (without first calling cc->release()),
call tcp_init_congestion_control() again.
Note that in this sequence tcp_init_congestion_control() is called
twice without a cc->release() call in between. Thus, for CC modules
that allocate memory in their init() function, e.g, CDG, a memory leak
may occur. The syzkaller tool managed to find a reproducer that
triggered such a leak in CDG.
The bug was introduced when that commit 8919a9b31e ("tcp: Only init
congestion control if not initialized already")
introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in
tcp_init_transfer(), missing the possibility for a sequence like the
one above, where a process could call setsockopt(TCP_CONGESTION) in
state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()),
which would call tcp_init_congestion_control(). It did not intend to
reset any initialization that the user had already explicitly made;
it just missed the possibility of that particular sequence (which
syzkaller managed to find).
Fixes: 8919a9b31e ("tcp: Only init congestion control if not initialized already")
Reported-by: syzbot+f1e24a0594d4e3a895d3@syzkaller.appspotmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 561022acb1 upstream.
While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.
Fixes: 563d34d057 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71158bb1f2 upstream.
The MPTCP receive path is hooked only into the TCP slow-path.
The DSS presence allows plain MPTCP traffic to hit that
consistently.
Since commit e1ff9e82e2 ("net: mptcp: improve fallback to TCP"),
when an MPTCP socket falls back to TCP, it can hit the TCP receive
fast-path, and delay or stop triggering the event notification.
Address the issue explicitly disabling the header prediction
for MPTCP sockets.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/200
Fixes: e1ff9e82e2 ("net: mptcp: improve fallback to TCP")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faffd1b2bd upstream.
The values were determined experimentally via boot tests, not by
measuring the bus behaviour with a scope. We plan to do scope
measurements to confirm or refine the values and will update the
devicetree if necessary once these have been obtained.
However, with the patch we can write and read data without issue, where
as booting the system without the patch failed at the point of mounting
the rootfs.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210628013605.1257346-1-andrew@aj.id.au
Fixes: 2fc88f9235 ("mmc: sdhci-of-aspeed: Expose clock phase controls")
Fixes: a5c5168478 ("ARM: dts: aspeed: Add Everest BMC machine")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d6608b57c upstream.
The degree values were reversed out from the magic tap values of 7 (in)
and 15 + inversion (out) initially suggested by Aspeed.
With the patch tacoma survives several gigabytes of reads and writes
using dd while without it locks up randomly during the boot process.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210625061017.1149942-1-andrew@aj.id.au
Fixes: 2fc88f9235 ("mmc: sdhci-of-aspeed: Expose clock phase controls")
Fixes: 961216c135 ("ARM: dts: aspeed: Add Rainier system")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca46ad2214 upstream.
Tacoma and Rainier both have a line-names array that is too long:
gpio gpiochip0: gpio-line-names is length 232 but should be at most length 208
This was probably copied from an AST2500 device tree that did have more
GPIOs on the controller.
Fixes: e9b24b55ca ("ARM: dts: aspeed: rainier: Add gpio line names")
Fixes: 2f68e4e7df ("ARM: dts: aspeed: tacoma: Add gpio line names")
Link: https://lore.kernel.org/r/20210624090742.56640-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52dfd86aa5 upstream.
Opening a new file is done in 2 steps on regular filesystems:
1. Call the create inode-op on the parent-dir to create an inode
to hold the meta-data related to the file.
2. Call the open file-op to get a handle for the file.
vboxsf however does not really use disk-backed inodes because it
is based on passing through file-related system-calls through to
the hypervisor. So both steps translate to an open(2) call being
passed through to the hypervisor. With the handle returned by
the first call immediately being closed again.
Making 2 open calls for a single open(..., O_CREATE, ...) calls
has 2 problems:
a) It is not really efficient.
b) It actually breaks some apps.
An example of b) is doing a git clone inside a vboxsf mount.
When git clone tries to create a tempfile to store the pak
files which is downloading the following happens:
1. vboxsf_dir_mkfile() gets called with a mode of 0444 and succeeds.
2. vboxsf_file_open() gets called with file->f_flags containing
O_RDWR. When the host is a Linux machine this fails because doing
a open(..., O_RDWR) on a file which exists and has mode 0444 results
in an -EPERM error.
Other network-filesystems and fuse avoid the problem of needing to
pass 2 open() calls to the other side by using the atomic_open
directory-inode op.
This commit fixes git clone not working inside a vboxsf mount,
by adding support for the atomic_open directory-inode op.
As an added bonus this should also make opening new files faster.
The atomic_open implementation is modelled after the atomic_open
implementations from the 9p and fuse code.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02f840f907 upstream.
Factor out the code to create / release a struct vboxsf_handle into
2 new helper functions.
This is a preparation patch for adding atomic_open support.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab0c29687b upstream.
Make vboxsf_dir_create() optionally return the vboxsf-handle for
the created file. This is a preparation patch for adding atomic_open
support.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc3ddee97c upstream.
Honor the excl flag to the dir-inode create op, instead of behaving
as if it is always set.
Note the old behavior still worked most of the time since a non-exclusive
open only calls the create op, if there is a race and the file is created
between the dentry lookup and the calling of the create call.
While at it change the type of the is_dir parameter to the
vboxsf_dir_create() helper from an int to a bool, to be consistent with
the use of bool for the excl parameter.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d952cfaf0c upstream.
When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.
$ make
[ snip ]
Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)
This is the only interactive place in the build process.
Commit 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.
Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.
Fixes: 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit deb7178eb9 upstream.
fp is netdev private data and it cannot be
used after free_netdev() call. Using fp after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() after error message.
Fixes: 61414f5ec9 ("FDDI: defza: Add support for DEC FDDIcontroller 700
TURBOchannel adapter")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcb9928a15 upstream.
This was not caught because there is no switch driver which implements
the .port_bridge_join but not .port_bridge_leave method, but it should
nonetheless be fixed, as in certain conditions (driver development) it
might lead to NULL pointer dereference.
Fixes: f66a6a69f9 ("net: dsa: permit cross-chip bridging between all trees in the system")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67a9c94317 upstream.
skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info
type without validation. lwtstate->data can have various types such as
mpls_iptunnel_encap, etc and these are not compatible.
So skb_tunnel_info() should validate before returning that pointer.
Splat looks like:
BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan]
Read of size 2 at addr ffff888106ec2698 by task ping/811
CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195
Call Trace:
dump_stack_lvl+0x56/0x7b
print_address_description.constprop.8.cold.13+0x13/0x2ee
? vxlan_get_route+0x418/0x4b0 [vxlan]
? vxlan_get_route+0x418/0x4b0 [vxlan]
kasan_report.cold.14+0x83/0xdf
? vxlan_get_route+0x418/0x4b0 [vxlan]
vxlan_get_route+0x418/0x4b0 [vxlan]
[ ... ]
vxlan_xmit_one+0x148b/0x32b0 [vxlan]
[ ... ]
vxlan_xmit+0x25c5/0x4780 [vxlan]
[ ... ]
dev_hard_start_xmit+0x1ae/0x6e0
__dev_queue_xmit+0x1f39/0x31a0
[ ... ]
neigh_xmit+0x2f9/0x940
mpls_xmit+0x911/0x1600 [mpls_iptunnel]
lwtunnel_xmit+0x18f/0x450
ip_finish_output2+0x867/0x2040
[ ... ]
Fixes: 61adedf3e3 ("route: move lwtunnel state to dst_entry")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28b34f01a7 upstream.
Some socket buffers allocated in the fclone cache (in __alloc_skb) can
end-up in the following path[1]:
napi_skb_finish
__kfree_skb_defer
napi_skb_cache_put
The issue is napi_skb_cache_put is not fclone friendly and will put
those skbuff in the skb cache to be reused later, although this cache
only expects skbuff allocated from skbuff_head_cache. When this happens
the skbuff is eventually freed using the wrong origin cache, and we can
see traces similar to:
[ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache
[ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0
[ 1223.950211] Modules linked in:
[ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474
[ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014
[ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0
Leading sometimes to other memory related issues.
Fix this by using __kfree_skb for fclone skbuff, similar to what is done
the other place __kfree_skb_defer is called.
[1] At least in setups using veth pairs and tunnels. Building a kernel
with KASAN we can for example see packets allocated in
sk_stream_alloc_skb hit the above path and later the issue arises
when the skbuff is reused.
Fixes: 9243adfc31 ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing")
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0336f8ffec upstream.
priv is netdev private data and it cannot be
used after free_netdev() call. Using priv after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 1e0a8b13d3 ("tlan: cancel work at remove path")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad297cd2db upstream.
adpt is netdev private data and it cannot be
used after free_netdev() call. Using adpt after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 54e19bc74f ("net: qcom/emac: do not use devm on internal phy pdev")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c78eaeebe8 upstream.
In case of netdev registration failure the code path will
jump to init_fail label:
init_fail:
netdev_err(ndev, "init failed\n");
moxart_mac_free_memory(ndev);
irq_map_fail:
free_netdev(ndev);
return ret;
So, there is no need to call free_netdev() before jumping
to error handling path, since it can cause UAF or double-free
bug.
Fixes: 6c821bd9ed ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9992a078b1 upstream.
Commit 28e104d002 ("net: ip_tunnel: fix mtu calculation") removed
dev->hard_header_len subtraction when calculate MTU for tunnel devices
as there is an overhead for device that has header_ops.
But there are ETHER tunnel devices, like gre_tap or erspan, which don't
have header_ops but set dev->hard_header_len during setup. This makes
pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by
subtracting the ETHER tunnel devices' dev->hard_header_len for MTU
calculation.
Fixes: 28e104d002 ("net: ip_tunnel: fix mtu calculation")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b452550a2 upstream.
Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.
Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09adf7566d upstream.
There are two pointers in struct xfrm_state_offload, *dev, *real_dev.
These are used in callback functions of struct xfrmdev_ops.
The *dev points whether bonding interface or real interface.
If bonding ipsec offload is used, it points bonding interface If not,
it points real interface.
And real_dev always points real interface.
So, netdevsim should always use real_dev instead of dev.
Of course, real_dev always not be null.
Test commands:
ip netns add A
ip netns exec A bash
modprobe netdevsim
echo "1 1" > /sys/bus/netdevsim/new_device
ip link add bond0 type bond mode active-backup
ip link set eth0 master bond0
ip link set eth0 up
ip link set bond0 up
ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in
Splat looks like:
BUG: spinlock bad magic on CPU#5, kworker/5:1/53
lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: <none>/-1,
.owner_cpu: -235736076
CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168
Workqueue: events linkwatch_event
Call Trace:
dump_stack+0xa4/0xe5
do_raw_spin_lock+0x20b/0x270
? rwlock_bug.part.1+0x90/0x90
_raw_spin_lock_nested+0x5f/0x70
bond_get_stats+0xe4/0x4c0 [bonding]
? rcu_read_lock_sched_held+0xc0/0xc0
? bond_neigh_init+0x2c0/0x2c0 [bonding]
? dev_get_alias+0xe2/0x190
? dev_get_port_parent_id+0x14a/0x360
? rtnl_unregister+0x190/0x190
? dev_get_phys_port_name+0xa0/0xa0
? memset+0x1f/0x40
? memcpy+0x38/0x60
? rtnl_phys_switch_id_fill+0x91/0x100
dev_get_stats+0x8c/0x270
rtnl_fill_stats+0x44/0xbe0
? nla_put+0xbe/0x140
rtnl_fill_ifinfo+0x1054/0x3ad0
[ ... ]
Fixes: 272c2330ad ("xfrm: bail early on slave pass over skb")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ff63a150b upstream.
Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment
routine even if the fragment contains only the ethernet FCS.
Fixes: 039fbc47f9 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a019abd802 upstream.
Since commit 2796d0c648 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.
Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.
Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.
Fixes: 2796d0c648 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77ac5e40c4 upstream.
When cleaning up the nf_table in tcf_ct_flow_table_cleanup_work
there is no guarantee that the callback list, added to by
nf_flow_table_offload_add_cb, is empty. This means that it is
possible that the flow_block_cb memory allocated will be lost.
Fix this by iterating the list and freeing the flow_block_cb entries
before freeing the nf_table entry (via freeing ct_ft).
Fixes: 978703f425 ("netfilter: flowtable: Add API for registering to flow table events")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b22580233d upstream.
Commit dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the inner
offload capability is to be restricted to UDP tunnels with default
Vxlan and Geneve ports.
This patch fixes the issue for tunnels with non-default ports using
features check capability and filtering appropriate features for such
tunnels.
Fixes: dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ca041f919 upstream.
In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then
nft_flow_rule_create is not called and flow is NULL. The subsequent
error handling execution via label err_destroy_flow_rule will lead
to a null pointer dereference on flow when calling nft_flow_rule_destroy.
Since the error path to err_destroy_flow_rule has to cater for null
and non-null flows, only call nft_flow_rule_destroy if flow is non-null
to fix this issue.
Addresses-Coverity: ("Explicity null dereference")
Fixes: 3c5e446220 ("netfilter: nf_tables: memleak in hw offload abort path")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8955b90c3c upstream.
The confirm operation should be checked. If there are any failed,
the packet should be dropped like in ovs and netfilter.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40fc3054b4 upstream.
Commit 628a5c5618 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.
Fixes: 628a5c5618 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 953b0dcbe2 upstream.
Commit bf3504cea7 ("net: dsa: mv88e6xxx: Add 6390 family PCS
registers to ethtool -d") added support for dumping SerDes PCS registers
via ethtool -d for Peridot.
The same implementation is also valid for Topaz, but was not
enabled at the time.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: bf3504cea7 ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a03b98d683 upstream.
Commit 0df9528736 ("mv88e6xxx: Add serdes Rx statistics") added
support for RX statistics on SerDes ports for Peridot.
This same implementation is also valid for Topaz, but was not enabled
at the time.
We need to use the generic .serdes_get_lane() method instead of the
Peridot specific one in the stats methods so that on Topaz the proper
one is used.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 0df9528736 ("mv88e6xxx: Add serdes Rx statistics")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c07fff3492 upstream.
Commit 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU
hash algorithm.") introduced ATU hash algorithm access via devlink, but
did not enable it for Topaz.
Enable this feature also for Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3709488790 upstream.
Commit 9e5baf9b36 ("net: dsa: mv88e6xxx: add RMU disable op")
introduced .rmu_disable() method with implementation for several models,
but forgot to add Topaz, which can use the Peridot implementation.
Use the Peridot implementation of .rmu_disable() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 9e5baf9b36 ("net: dsa: mv88e6xxx: add RMU disable op")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7da467d82d upstream.
Commit f3a2cd326e ("net: dsa: mv88e6xxx: introduce .port_set_policy")
introduced .port_set_policy() method with implementation for several
models, but forgot to add Topaz, which can use the 6352 implementation.
Use the 6352 implementation of .port_set_policy() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: f3a2cd326e ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a3c680aa2 upstream.
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection
logic of the internal PHY to prevent the system from sleeping. Some
internal PHYs will report that energy is detected when the network
interface is closed which can prevent the system from going to sleep
if WoL is enabled when the interface is brought down.
Since the driver does not support waking the system on this logic,
this commit clears the bit whenever the internal PHY is powered up
and the other logic for manipulating the bit is removed since it
serves no useful function.
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f34f1eac3 upstream.
We tried to do something similar in b569a17607 ("userfaultfd: wp: drop
_PAGE_UFFD_WP properly when fork") previously, but it's not doing it all
right.. A few fixes around the code path:
1. We were referencing VM_UFFD_WP vm_flags on the _old_ vma rather
than the new vma. That's overlooked in b569a17607, so it won't work
as expected. Thanks to the recent rework on fork code
(7a4830c380), we can easily get the new vma now, so switch the
checks to that.
2. Dropping the uffd-wp bit in copy_huge_pmd() could be wrong if the
huge pmd is a migration huge pmd. When it happens, instead of using
pmd_uffd_wp(), we should use pmd_swp_uffd_wp(). The fix is simply to
handle them separately.
3. Forget to carry over uffd-wp bit for a write migration huge pmd
entry. This also happens in copy_huge_pmd(), where we converted a
write huge migration entry into a read one.
4. In copy_nonpresent_pte(), drop uffd-wp if necessary for swap ptes.
5. In copy_present_page() when COW is enforced when fork(), we also
need to pass over the uffd-wp bit if VM_UFFD_WP is armed on the new
vma, and when the pte to be copied has uffd-wp bit set.
Remove the comment in copy_present_pte() about this. It won't help a huge
lot to only comment there, but comment everywhere would be an overkill.
Let's assume the commit messages would help.
[peterx@redhat.com: fix a few thp pmd missing uffd-wp bit]
Link: https://lkml.kernel.org/r/20210428225030.9708-4-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210428225030.9708-3-peterx@redhat.com
Fixes: b569a17607 ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork")
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fc7a5f6fd upstream.
Patch series "mm/uffd: Misc fix for uffd-wp and one more test".
This series tries to fix some corner case bugs for uffd-wp on either thp
or fork(). Then it introduced a new test with pagemap/pageout.
Patch layout:
Patch 1: cleanup for THP, it'll slightly simplify the follow up patches
Patch 2-4: misc fixes for uffd-wp here and there; please refer to each patch
Patch 5: add pagemap support for uffd-wp
Patch 6: add pagemap/pageout test for uffd-wp
The last test introduced can also verify some of the fixes in previous
patches, as the test will fail without the fixes. However it's not easy
to verify all the changes in patch 2-4, but hopefully they can still be
properly reviewed.
Note that if considering the ongoing uffd-wp shmem & hugetlbfs work, patch
5 will be incomplete as it's missing e.g. hugetlbfs part or the special
swap pte detection. However that's not needed in this series, and since
that series is still during review, this series does not depend on that
one (the last test only runs with anonymous memory, not file-backed). So
this series can be merged even before that series.
This patch (of 6):
Huge zero page is handled in a special path in copy_huge_pmd(), however it
should share most codes with a normal thp page. Trying to share more code
with it by removing the special path. The only leftover so far is the
huge zero page refcounting (mm_get_huge_zero_page()), because that's
separately done with a global counter.
This prepares for a future patch to modify the huge pmd to be installed,
so that we don't need to duplicate it explicitly into huge zero page case
too.
Link: https://lkml.kernel.org/r/20210428225030.9708-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210428225030.9708-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mike Kravetz <mike.kravetz@oracle.com>, peterx@redhat.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a52a48973 ]
Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.
Turris MOX DTS file contains also old compatible string for backward
compatibility.
The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.
This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.
Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90ae47215d ]
Add more generic compatible string 'marvell,armada-3700-rwtm-firmware' for
this driver, since it can also be used on other Armada 3720 devices.
Current compatible string 'cznic,turris-mox-rwtm' is kept for backward
compatibility.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03313d1c3a ]
The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().
Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41d71fe59c ]
The existing CALL_ON_STACK() macro allows for subtle bugs:
- There is no type checking of the function that is being called. That
is: missing or too many arguments do not cause any compile error or
warning. The same is true if the return type of the called function
changes. This can lead to quite random bugs.
- Sign and zero extension of arguments is missing. Given that the s390
C ABI requires that the caller of a function performs proper sign
and zero extension this can also lead to subtle bugs.
- If arguments to the CALL_ON_STACK() macros contain functions calls
register corruption can happen due to register asm constructs being
used.
Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e9cc20b8 ]
tinyconfig fails to boot, because without CONFIG_BUG report_bug()
always returns BUG_TRAP_TYPE_BUG, which causes mc 0,0 in
test_monitor_call() to panic. Fix by skipping the test without
CONFIG_BUG.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e5c9f9a75 ]
Zone device is enabled after thermal_zone_of_sensor_register() completion,
but it's not disabled before senor is unregistered, leaving temperature
polling active. This results in accessing a disabled zone device and
produces a warning about this problem. Stop zone device before
unregistering it in order to fix this "use-after-free" problem.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210616190417.32214-3-digetx@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d0ad7cb5 ]
The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.
This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49da96d779 ]
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 332a9dd1d8 ]
The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.
[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]
Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 742b0d7e15 ]
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a979522a1a ]
To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.
If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.
Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.
[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ae5950db6 ]
With -Wshadow:
drivers/thermal/rcar_gen3_thermal.c: In function ‘rcar_gen3_thermal_probe’:
drivers/thermal/rcar_gen3_thermal.c:310:13: warning: declaration of ‘rcar_gen3_ths_tj_1’ shadows a global declaration [-Wshadow]
310 | const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
| ^~~~~~~~~~~~~~~~~~
drivers/thermal/rcar_gen3_thermal.c:246:18: note: shadowed declaration is here
246 | static const int rcar_gen3_ths_tj_1 = 126;
| ^~~~~~~~~~~~~~~~~~
To add to the confusion, the local variable has a different type.
Fix the shadowing by renaming the local variable to ths_tj_1.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/9ea7e65d0331daba96f9a7925cb3d12d2170efb1.1623076804.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfda1fd16a ]
enet_clk_ref actually is sourced from internal gpr clocks
which needs a default rate. Also update enet lpcg clock
output names to be more straightforward.
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15a5261e4d ]
This fixes multiple issues with the current non-existent PCIe clock setup:
The controller can run at up to 250MHz, so use a parent that provides this
clock.
The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.
The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1de3aa8611 ]
The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8240c972c1 ]
On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:
[ 10.471363] couldn't get idr
[ 10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[ 10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr
[ 10.471708] fsl-dspi: probe of 2100000.spi failed with error -16
Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit 29d2daf2c3 ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8efe01b438 ]
The PCIe host bridge on RK3399 advertises a single 64-bit memory
address range even though it lies entirely below 4GB.
Previously the OF PCI range parser treated 64-bit ranges more
leniently (i.e., as 32-bit), but since commit 9d57e61bf7 ("of/pci:
Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
the code takes a stricter view and treats the ranges as advertised in
the device tree (i.e, as 64-bit).
The change in behaviour causes failure when allocating bus addresses
to devices connected behind a PCI-to-PCI bridge that require
non-prefetchable memory ranges. The allocation failure was observed
for certain Samsung NVMe drives connected to RockPro64 boards.
Update the host bridge window attributes to treat it as 32-bit address
memory. This fixes the allocation failure observed since commit
9d57e61bf7.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210607112856.3499682-5-punitagrawal@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd778b8939 ]
The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's
available.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2d0ee225e ]
The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's
available.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 093a474ce1 ]
If the PM related modules are not loaded and PM firmware not configured,
the system suspend fails to resume. Let's fix this by adding initial
platform_suspend_ops to block suspend and warn about missing modules.
When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted
with it's firmware, pm33xx sets up working platform_suspend_ops. Note
that we need to configure at least PM_SUSPEND_STANDBY to have
suspend_set_ops().
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bf4abe190 ]
On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:
-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f493162319 ]
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC
supply set to v3v3 (buck4), the same as the VMMC supply. That was
incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3)
instead.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11aaf2a0f8 ]
It prevents the following warning:
pin-controller@50002000: 'ltdc' does not match any of the regexes:
'-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+'
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0740fb869 ]
Fix compilation warning on 64bit platforms caused by implicit promotion
of 32bit signed integer to a 64bit unsigned value which happens after
enabling compile-testing of the EMC drivers.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf24b91f4b ]
Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.
Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0171b07373 ]
The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dee9e3b09 ]
Some node unit addresses were put wrongly in the dts, resulting in
below warning when run with W=1
arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000"
Fix by correcting to the correct address as given in reg node
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4dd6066bc ]
The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator.
Both regulators are always-on, nevertheless the DT model needs to be
corrected, fix it.
Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f45da704d ]
All Tegra boards which use WM8903 audio codec are specifying a wrong
polarity for the headphones detection GPIO. The kernel driver hardcodes
the polarity to active-low, which is the correct polarity, so we can fix
the device-trees safely.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69db725cdb ]
The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although
this does not make any difference functionality wise it's better to update
to avoid confusion.
Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output
in K3 am654x/j721e/j7200 board files.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210526132041.6104-1-grygorii.strashko@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e79e58f33 ]
Populate the device-tree node for the PMU device on Tegra194. This also
fixes the following warning that is observed on booting Tegra194.
ERR KERN kvm: pmu event creation failed -2
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e7f5ee113 ]
A number of sub-mailbox node names in various OMAP2+ dts files are
currently using underscores. This is not adhering to the node name
convention, fix all of these to use hiphens.
These nodes are already using the prefix mbox, so they will be in
compliance with the sub-mailbox node name convention being added in
the OMAP Mailbox YAML binding as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7d30b8fcd ]
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2566d5b8c1 ]
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b644c5e01c ]
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 174a1dcc96 ]
When building with 'make -s', no output to stdout should be printed.
As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.
I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.
Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.
[Note about this implementation]
'exec >/dev/null;' may look somewhat tricky, but this has a reason.
Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:
cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null
... but it would not work if $(cmd_$(1)) itself contains a redirection.
For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.
It would be expanded into:
echo "#include <asm-generic/$*.h>" > $@ >/dev/null
Then, the target file gets empty because the string will go to /dev/null
instead of $@.
Next, I tried this:
cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null
The form above would be expanded into:
{ echo "#include <asm-generic/$*.h>" > $@; } >/dev/null
This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.
When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:
set -e; { ; } >/dev/null
..., which causes an syntax error.
I also tried this:
cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null
... but this causes a syntax error for the same reason.
So, finally I adopted:
cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))
[1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebc666f39f ]
The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers. For the Beacon boards, this reference clock
is controlled by a programmable versaclock. Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.
Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e409c1e1d5 ]
This fixes up the axis on the Janice accelerometer to give
the right orientation according to tests.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 723de6a412 ]
Without SoC specific PHY fixups the network interface on this board will
fail to work. Provide missing DT properties to make it work again.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59ba546d16 ]
The Golden and Skomer phones have BCM4334 WLAN+BT chips,
so make the compatible strings reflect the new available
bindings for these.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4beba40119 ]
This adds a mounting matrix to the accelerometer
on the TVK1281618 R3.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4917b70281 ]
Rename the AB8500 gpio controller node from ab8500-gpio to
ab8500-gpiocontroller, since -gpio is a common suffix for
gpio consumers.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b82f8e2992 ]
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
sdmmcio-regulator: states:0:
[1800000, 1, 3300000, 0] is too long
dtbs_check expects regulator-gpio states in a format
of 2 per item, so fix them all.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
regulator/gpio-regulator.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210510215840.16270-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14cdc1f243 ]
Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.
Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05cf8fffcd ]
The to_ti_syscon_reset_data macro currently only works if the
parameter passed into it is called 'rcdev'.
Fixes a checkpatch --strict issue:
CHECK: Macro argument reuse 'rcdev' - possible side-effects?
#53: FILE: drivers/reset/reset-ti-syscon.c:53:
+#define to_ti_syscon_reset_data(rcdev) \
+ container_of(rcdev, struct ti_syscon_reset_data, rcdev)
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ecfad495 ]
A test with the command below aimed at powerpc generates
notifications in the Rockchip arm64 tree.
Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3399.dtsi
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfbfb86a43 ]
A test with the command below aimed at powerpc generates
notifications in the Rockchip ARM tree.
Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3036-kylin and rk3288
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c47a5599ed ]
Some different PMU types may have the same substring. For example, on
Icelake server we have PMU types "uncore_imc" and
"uncore_imc_free_running". Both PMU types have the substring
"uncore_imc". But the parser wrongly thinks they are the same PMU type.
We enable an imc event,
perf stat -e uncore_imc/event=0xe3/ -a -- sleep 1
Perf actually expands the event to:
uncore_imc_0/event=0xe3/
uncore_imc_1/event=0xe3/
uncore_imc_2/event=0xe3/
uncore_imc_3/event=0xe3/
uncore_imc_4/event=0xe3/
uncore_imc_5/event=0xe3/
uncore_imc_6/event=0xe3/
uncore_imc_7/event=0xe3/
uncore_imc_free_running_0/event=0xe3/
uncore_imc_free_running_1/event=0xe3/
uncore_imc_free_running_3/event=0xe3/
uncore_imc_free_running_4/event=0xe3/
That's because the "uncore_imc_free_running" matches the
pattern "uncore_imc*".
Now we check that the last characters of PMU name is '_<digit>'.
For example, for pattern "uncore_imc*", "uncore_imc_0" is parsed ok, but
"uncore_imc_free_running_0" fails.
Fixes: b2b9d3a3f0 ("perf pmu: Support wildcards on pmu name in dynamic pmu events")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210701064253.1175-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47ce8527fb ]
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21 ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aa4ff7688 ]
This is no longer true since we switched to generic entry. The code
switches to the IRQ stack before calling do_IRQ, but switches back
to the kernel stack before calling irq_exit().
Fixes: 56e62a7370 ("s390: convert to generic entry")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dea8cfcc33 ]
Commit 48a1f56526 ("perf script python: Add more PMU fields to
event handler dict") added functionality to report fields like weight,
iregs, uregs etc via perf report. That commit predefined buffer size to
512 bytes to print those fields.
But in PowerPC, since we added extended regs support in:
068aeea377 ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs")
d735599a06 ("powerpc/perf: Add extended regs support for power10 platform")
Now iregs can carry more bytes of data and this predefined buffer size
can result to data loss in perf script output.
This patch resolves this issue by making the buffer size dynamic, based
on the number of registers needed to print. It also changes the
regs_map() return type from int to void, as it is not being used by the
set_regs_in_dict(), its only caller.
Fixes: 068aeea377 ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20210628062341.155839-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97e488073c ]
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
Fixes: e76e1fdfa8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cddc40f561 ]
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
Fixes: c50ec67875 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a57 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e667624c2 ]
It turns out that jump_label_text_reserved() was reporting __init text
as being reserved past the time when the __init text was freed and
re-used.
For a long time, this resulted in, at worst, not being able to kprobe
text that happened to land at the re-used address. However a recent
commit e7bf1ba97a ("jump_label, x86: Emit short JMP") made it a
fatal mistake because it now needs to read the instruction in order to
determine the conflict -- an instruction that's no longer there.
Fixes: 4c3ef6d793 ("jump label: Add jump_label_text_reserved() to reserve jump points")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210628113045.045141693@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e1493f463 ]
When a task wakes up on an idle rq, uclamp_rq_util_with() would max
aggregate with rq value. But since there is no task enqueued yet, the
values are stale based on the last task that was running. When the new
task actually wakes up and enqueued, then the rq uclamp values should
reflect that of the newly woken up task effective uclamp values.
This is a problem particularly for uclamp_max because it default to
1024. If a task p with uclamp_max = 512 wakes up, then max aggregation
would ignore the capping that should apply when this task is enqueued,
which is wrong.
Fix that by ignoring max aggregation if the rq is idle since in that
case the effective uclamp value of the rq will be the ones of the task
that will wake up.
Fixes: 9d20ad7dfc ("sched/uclamp: Add uclamp_util_with()")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
[qias: Changelog]
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lore.kernel.org/r/20210630141204.8197-1-xuewen.yan94@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb607cd495 ]
Re-add the regulator-always-on property for vcc_sdio which supplies sdmmc,
since it gets disabled during reboot now and the bootrom expects it to be
enabled when booting from SD card. This makes rebooting impossible in that
case and requires a hard reset to boot again.
Fixes: 04a0077fdb ("arm64: dts: rockchip: Remove always-on properties from regulator nodes on rk3399-roc-pc.")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121306.7740-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06b2818678 ]
This might be a limitation of either the current panfrost driver
devfreq implementation or how the gpu is implemented in RK3399 SoC.
The gpu regulator must never get disabled or the registers get
(randomly?) inaccessable by the driver. (see all other RK3399 boards)
Fixes: ec7d731d81 ("arm64: dts: rockchip: Add node for gpu on rk3399-roc-pc")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121446.7802-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fae2016099 ]
Currently it is hard to determinate if on Armada 3720 device is HWRNG
by running kernel accessible or not. So print information message into
dmesg when HWRNG is available and registration was successful.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eab59cf0d ]
When Marvell's rWTM firmware, which does not support the GET_RANDOM
command, is used, kernel prints an error message
hwrng: no data available
every 10 seconds.
Fail probing of this driver if the rWTM firmware does not support the
GET_RANDOM command.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f9988894 ]
Report a notice level message if a command is not supported by the rWTM
firmware.
This should not be an error, merely a notice, because the firmware can
be used on boards that do not have manufacturing information burned.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e34e60253d ]
The status decoding function mox_get_status() currently contains an
incorrect check: if the error status is not MBOX_STS_SUCCESS, it always
returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and
we don't get the actual error code sent by the firmware.
Fix this.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74ee585b7e ]
M= (or KBUILD_EXTMOD) generally expects a directory path without any
trailing slashes, like M=a/b/c.
If you add a trailing slash, like M=a/b/c/, you will get ugly build
logs (two slashes in a series), but it still works fine as long as it
is consistent between 'make modules' and 'make modules_install'.
The following commands correctly build and install the modules.
$ make M=a/b/c/ modules
$ sudo make M=a/b/c/ modules_install
Since commit ccae4cfa7b ("kbuild: refactor scripts/Makefile.modinst"),
a problem happens if you add a trailing slash only for modules_install.
$ make M=a/b/c modules
$ sudo make M=a/b/c/ modules_install
No module is installed in this case, Johannes Berg reported. [1]
Trim any trailing slashes from $(KBUILD_EXTMOD).
I used the 'dirname' command to remove all the trailing slashes in
case someone adds more slashes like M=a/b/c/////. The Make's built-in
function, $(dir ...) cannot take care of such a case.
[1]: https://lore.kernel.org/lkml/10cc8522b27a051e6a9c3e158a4c4b6414fd04a0.camel@sipsolutions.net/
Fixes: ccae4cfa7b ("kbuild: refactor scripts/Makefile.modinst")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50c9bfca1b ]
The current device tree CPSW3g node adds non-zero "mac-address" property to
the ports, which prevents random MAC address assignment to network devices
if bootloader failed to update DT. This may cause more then one host to
have the same MAC in the network.
mac-address = [00 00 de ad be ef];
mac-address = [00 01 de ad be ef];
In addition, there is one MAC address available in eFuse registers which
can be used for default port 1.
Hence, fix ports MAC properties by:
- resetting "mac-address" property to 0
- adding ti,syscon-efuse = <&main_conf 0x200> to Port 1
Fixes: 3753b12877 ("arm64: dts: ti: k3-am64-main: Add CPSW DT node")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210608184940.25934-1-grygorii.strashko@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b11fec734 ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: b0b0395154 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 414bfe1d26 ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: 444d66fafa ("ARM: dts: add spi wifi support to cm-t335")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78b4b16528 ]
With [1] USB4 target-module node got defined in dra74x.dtsi file.
However, the earlier definition in [2] was not removed, and this
duplication of the target module is causing boot failure on dra74
variant boards - dra7-evm, dra76-evm.
USB4 is only present in DRA74x variants, so keeping the entry in
dra74x.dtsi and removing it from the top level interconnect hierarchy
dra7-l4.dtsi file. This change makes the USB4 target module no longer
visible to AM5718, DRA71x and DRA72x so removing references to it in
their respective dts files.
[1]: commit c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for
dra7 dwc3")
[2]: commit 549fce068a ("ARM: dts: dra7: Add l4 interconnect
hierarchy and ti-sysc data")
Fixes: c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3")
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd5431b2f9 ]
Although the schematics of Pine A64-LTS and SoPine Baseboard shows both
the RX and TX internal delay are enabled, they're using the same broken
RTL8211E chip batch with Pine A64+, so they should use TXID instead, not
ID.
In addition, by checking the real components soldered on both a SoPine
Baseboard and a Pine A64-LTS, RX delay is not enabled (GR69 soldered and
GR70 NC) despite the schematics says it's enabled. It's a common
situation for Pine64 boards that the NC information on schematics is not
the same with the board.
So the RGMII delay mode should be TXID on these boards.
Fixes: c2b111e59a ("arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210609083843.463750-1-icenowy@aosc.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c6d0b55b4 ]
Rename the external refclk inputs to the SERDES from
dummy_cmn_refclk/dummy_cmn_refclk1 to cmn_refclk/cmn_refclk1
respectively. Also move the external refclk DT nodes outside the
cbass_main DT node. Since in j721e common processor board, only the
cmn_refclk1 is connected to 100MHz clock, fix the clock frequency.
Fixes: afd094ebe6 ("arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1771a33b34 ]
"make dtbs_check":
arm64/boot/dts/renesas/r8a779a0-falcon.dt.yaml: interrupt-controller@f1000000: 'power-domains' does not match any of the regexes: '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Remove the "power-domains" property, as the GIC on R-Car V3U is
always-on, and not part of a clock domain.
Fixes: 834c310f54 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/a9ae5cbc7c586bf2c6b18ddc665ad7051bd1d206.1622560236.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5aede3e6d ]
1. Reorder interrupts
2. Fix typo: s/spi_lr_overhead/spi_lr_overread/
3. Rename node: s/spi-nor@0/flash@0/
This fixes:
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long
Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected)
'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e669017f ]
The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix c5a2838025 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 19e5cef058 ("dt-bindings: i2c: at91: document optional bus recovery properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb7af474e ]
During an async commands execution the Rx buffer length is at first set
to max_msg_sz when the synchronous part of the command is first sent.
However once the synchronous part completes the transport layer waits
for the delayed response which will be processed using the same xfer
descriptor initially allocated. Since synchronous response received at
the end of the xfer will shrink the Rx buffer length to the effective
payload response length, it needs to be reset again.
Raise the Rx buffer length again to max_msg_sz before fetching the
delayed response to ensure full response is read correctly from the
shared memory.
Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@arm.com
Fixes: 58ecdf03db ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: moved reset to scmi_handle_response as it could race with
do_xfer_with_response]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0fce06e34 ]
In this new power domain driver, when adding one power domain
it will prepare the dependent clocks at the same.
So we only do clk_bulk_enable/disable control during power ON/OFF.
When system suspend, the pm runtime framework will forcely power off
power domains. However, the dependent clocks are disabled but kept
prepared.
In MediaTek clock drivers, PLL would be turned ON when we do
clk_bulk_prepare control.
Clock hierarchy:
PLL -->
DIV_CK -->
CLK_MUX
(may be dependent clocks)
-->
SUBSYS_CG
(may be dependent clocks)
It will lead some unexpected clock states during system suspend.
This patch will fix by doing prepare_enable/disable_unprepare on
dependent clocks at the same time while we are going to power on/off
any power domain.
Fixes: 59b644b01c ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: chun-jie.chen <chun-jie.chen@mediatek.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210601035905.2970384-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eed6ff1bb2 ]
Mediatek requires mmsys clocks to be unprepared during suspend,
otherwise system has chances to hang.
syscon_regmap_lookup_by_phandle_optional() will attach and prepare the
first clock in smi node, leading to additional prepare to the clock
which is not balanced with the prepare/unprepare pair in resume/suspend
callbacks.
If a power domain node requests an smi node and the smi node's first
clock is an mmsys clock, it will results in an unstable suspend resume.
Fixes: f414854c88 ("soc: mediatek: pm-domains: Add SMI block as bus protection block")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: chun-jie.chen <chun-jie.chen@mediatek.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210601035905.2970384-2-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fea67710e ]
When call irq_get_irq_data() to get the IRQ's irq_data failed, an
appropriate error code -ENOENT should be returned. However, we directly
return 'err', which records the IRQ number instead of the error code.
Fixes: 139251fc22 ("firmware: tegra: add bpmp driver for Tegra210")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cebcf9932 ]
The Microchip LAN8710Ai PHY requires XTAL1/CLKIN external clock to be
enabled when the nRST is toggled according to datasheet Microchip
LAN8710A/LAN8710Ai DS00002164B page 35 section 3.8.5.1 Hardware Reset:
"
A Hardware reset is asserted by driving the nRST input pin low. When
driven, nRST should be held low for the minimum time detailed in
Section 5.5.3, "Power-On nRST & Configuration Strap Timing," on page
59 to ensure a proper transceiver reset. During a Hardware reset, an
external clock must be supplied to the XTAL1/CLKIN signal.
"
This is accidentally fulfilled in the current setup, where ETHCK_K is used
to supply both PHY XTAL1/CLKIN and is also fed back through eth_clk_fb to
supply ETHRX clock of the DWMAC. Hence, the DWMAC enables ETHRX clock,
that has ETHCK_K as parent, so ETHCK_K clock are also enabled, and then
the PHY reset toggles.
However, this is not always the case, e.g. in case the PHY XTAL1/CLKIN
clock are supplied by some other clock source than ETHCK_K or in case
ETHRX clock are not supplied by ETHCK_K. In the later case, ETHCK_K would
be kept disabled, while ETHRX clock would be enabled, so the PHY would
not be receiving XTAL1/CLKIN clock and the reset would fail.
Improve the DT by adding the PHY clock phandle into the PHY node, which
then also requires moving the PHY reset GPIO specifier in the same place
and that then also requires correct PHY reset GPIO timing, so add that
too.
A brief note regarding the timing, the datasheet says the reset should
stay asserted for at least 100uS and software should wait at least 200nS
after deassertion. Set both delays to 500uS which should be plenty.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60fd5ac1f ]
The rmtfs_mem region is a weird one, downstream allocates it
dynamically, and supports a "qcom,guard-memory" property which when set
will reserve 4k above and below the rmtfs memory.
A common from qcom 4.9 kernel msm_sharedmem driver:
/*
* If guard_memory is set, then the shared memory region
* will be guarded by SZ_4K at the start and at the end.
* This is needed to overcome the XPU limitation on few
* MSM HW, so as to make this memory not contiguous with
* other allocations that may possibly happen from other
* clients in the system.
*/
When the kernel tries to touch memory that is too close the
rmtfs region it may cause an XPU violation. Such is the case on the
OnePlus 6 where random crashes would occur usually after boot.
Reserve 4k above and below the rmtfs_mem to avoid hitting these XPU
Violations.
This doesn't entirely solve the random crashes on the OnePlus 6/6T but
it does seem to prevent the ones which happen shortly after modem
bringup.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210502014146.85642-4-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54b909436e ]
The scnprintf() function silently truncates the printf() and returns
the number bytes that it was able to copy (not counting the NUL
terminator). Thus, the highest value it can return here is
"NAME_SIZE - 1" and the overflow check is dead code. Fix this by
using the snprintf() function which returns the number of bytes that
would have been copied if there was enough space and changing the
condition from "> NAME_SIZE" to ">= NAME_SIZE".
Fixes: 92589c986b ("rtc-proc: permit the /proc/driver/rtc device to use other devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0ddc5b170 ]
The added Kconfig dependency is slightly incorrect, which can
lead to a link failure when the watchdog is a loadable module:
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_rtc_based_timers':
rtc-bd70528.c:(.text+0x6cc): undefined reference to `bd70528_wdt_set'
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_time':
rtc-bd70528.c:(.text+0xaa0): undefined reference to `bd70528_wdt_lock'
arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0xab8): undefined reference to `bd70528_wdt_unlock'
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_alm_enable':
rtc-bd70528.c:(.text+0xfc0): undefined reference to `bd70528_wdt_lock'
arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0x1030): undefined reference to `bd70528_wdt_unlock'
The problem is that it allows to be built-in if MFD_ROHM_BD71828
is built-in, even when the watchdog is a loadable module.
Rework this so that having the watchdog as a loadable module always
forces the rtc to be a module as well instead of built-in,
regardless of bd71828.
Fixes: c56dc069f2 ("rtc: bd70528: Support RTC on ROHM BD71815")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210422151545.2403356-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0e70d4946 ]
Commit 'fbbe38309d56 ("arm64: defconfig: Allow mt8173-based boards to boot
from usb")' added the MTK_PMIC_WRAP config built-in. It needs to be
built-in in order to be able to boot from USB or the MMC without needing
a ramdisk, but that symbol was already defined as a module so now we are
getting the following warning:
arch/arm64/configs/defconfig:996:warning: override: reassigning to symbol MTK_PMIC_WRAP
Remove the MTK_PMIC_WRAP=m from the defconfig to remove the error.
Fixes: fbbe38309d ("arm64: defconfig: Allow mt8173-based boards to boot from usb")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210423075201.2616023-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ab9d6219f ]
The Intel Gateway reset controller is only present on Intel Gateway
platforms. Hence add a dependency on X86, to prevent asking the user
about this driver when configuring a kernel without Intel Gateway
support.
Fixes: c9aef213e3 ("reset: intel: Add system reset controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42f6a76fbe ]
The Broadcom STB RESCAL reset controller is only present on Broadcom
BCM7216 platforms. Hence add a dependency on ARCH_BRCMSTB, to prevent
asking the user about this driver when configuring a kernel without
BCM7216 support.
Also, merely enabling CONFIG_COMPILE_TEST should not enable additional
code, and thus should not enable this driver by default.
Fixes: 4cf176e523 ("reset: Add Broadcom STB RESCAL reset controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3bb3d27c ]
Two ethernet node was added by
commit 95220046a6 ("ARM: dts: Add ethernet to a bunch of platforms")
and commit d6d0cef55e ("ARM: dts: Add the FOTG210 USB host to Gemini boards")
This patch removes the duplicate one.
Fixes: d6d0cef55e ("ARM: dts: Add the FOTG210 USB host to Gemini boards")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 681ba73c72 ]
ld.lld warns that the '.modinfo' section is not currently handled:
ld.lld: warning: kernel/built-in.a(workqueue.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(printk/printk.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(irq/spurious.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(rcu/update.o):(.modinfo) is being placed in '.modinfo'
The '.modinfo' section was added in commit 898490c010 ("moduleparam:
Save information about built-in modules in separate file") to the DISCARDS
macro but Hexagon has never used that macro. The unification of DISCARDS
happened in commit 023bf6f1b8 ("linker script: unify usage of discard
definition") in 2009, prior to Hexagon being added in 2011.
Switch Hexagon over to the DISCARDS macro so that anything that is
expected to be discarded gets discarded.
Link: https://lkml.kernel.org/r/20210521011239.1332345-3-nathan@kernel.org
Fixes: e95bf452a9 ("Hexagon: Add configuration and makefiles for the Hexagon architecture.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fef087d0d ]
Patch series "hexagon: Fix build error with CONFIG_STACKDEPOT and select CONFIG_ARCH_WANT_LD_ORPHAN_WARN".
This series fixes an error with ARCH=hexagon that was pointed out by the
patch "mm/slub: use stackdepot to save stack trace in objects".
The first patch fixes that error by handling the '.irqentry.text' and
'.softirqentry.text' sections.
The second patch switches Hexagon over to the common DISCARDS macro, which
should have been done when Hexagon was merged into the tree to match
commit 023bf6f1b8 ("linker script: unify usage of discard definition").
The third patch selects CONFIG_ARCH_WANT_LD_ORPHAN_WARN so that something
like this does not happen again.
This patch (of 3):
Patch "mm/slub: use stackdepot to save stack trace in objects" in -mm
selects CONFIG_STACKDEPOT when CONFIG_STACKTRACE_SUPPORT is selected and
CONFIG_STACKDEPOT requires IRQENTRY_TEXT and SOFTIRQENTRY_TEXT to be
handled after commit 505a0ef15f ("kasan: stackdepot: move
filter_irq_stacks() to stackdepot.c") due to the use of the
__{,soft}irqentry_text_{start,end} section symbols. If those sections are
not handled, the build is broken.
$ make ARCH=hexagon CROSS_COMPILE=hexagon-linux- LLVM=1 LLVM_IAS=1 defconfig all
...
ld.lld: error: undefined symbol: __irqentry_text_start
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
ld.lld: error: undefined symbol: __irqentry_text_end
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
ld.lld: error: undefined symbol: __softirqentry_text_start
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
ld.lld: error: undefined symbol: __softirqentry_text_end
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
>>> referenced by stackdepot.c
>>> stackdepot.o:(filter_irq_stacks) in archive lib/built-in.a
...
Add these sections to the Hexagon linker script so the build continues to
work. ld.lld's orphan section warning would have caught this prior to the
-mm commit mentioned above:
ld.lld: warning: kernel/built-in.a(softirq.o):(.softirqentry.text) is being placed in '.softirqentry.text'
ld.lld: warning: kernel/built-in.a(softirq.o):(.softirqentry.text) is being placed in '.softirqentry.text'
ld.lld: warning: kernel/built-in.a(softirq.o):(.softirqentry.text) is being placed in '.softirqentry.text'
Link: https://lkml.kernel.org/r/20210521011239.1332345-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20210521011239.1332345-2-nathan@kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1381
Fixes: 505a0ef15f ("kasan: stackdepot: move filter_irq_stacks() to stackdepot.c")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f46f84931a ]
After we grab the lock in nfs4_pnfs_ds_connect(), there is no check for
whether or not ds->ds_clp has already been initialised, so we can end up
adding the same transports multiple times.
Fixes: fc821d5920 ("pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b77f97a7e ]
If the layout gets invalidated, we should wait for any outstanding
layoutget requests for that layout to complete, and we should resend
them only after re-establishing the layout stateid.
Fixes: d29b468da4 ("pNFS/NFSv4: Improve rejection of out-of-order layouts")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa95edf309 ]
If we have multiple outstanding layoutget requests, the current code to
update the layout barrier assumes that the outstanding layout stateids
are updated in order. That's not necessarily the case.
Instead of using the value of lo->plh_outstanding as a guesstimate for
the window of values we need to accept, just wait to update the window
until we're processing the last one. The intention here is just to
ensure that we don't process 2^31 seqid updates without also updating
the barrier.
Fixes: 1bcf34fdac ("pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba512c1bc3 ]
Earlier commits refactored some NFS read code and removed
nfs_readpage_async(), but neglected to properly fixup
nfs_readpage_from_fscache_complete(). The code path is
only hit when something unusual occurs with the cachefiles
backing filesystem, such as an IO error or while a cookie
is being invalidated.
Mark page with PG_checked if fscache IO completes in error,
unlock the page, and let the VM decide to re-issue based on
PG_uptodate. When the VM reissues the readpage, PG_checked
allows us to skip over fscache and read from the server.
Link: https://marc.info/?l=linux-nfs&m=162498209518739
Fixes: 1e83b173b2 ("NFS: Add nfs_pageio_complete_read() and remove nfs_readpage_async()")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0340f16a0 upstream.
A previous refactoring of nfs_readpage() might end up calling
wait_on_page_locked_killable() even if readpage_async_filler() failed
with an internal error and pg_error was non-zero (for example, if
nfs_create_request() failed). In the case of an internal error,
skip over wait_on_page_locked_killable() as this is only needed
when the read is sent and an error occurs during completion handling.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 500817bf5e ]
We are reading a Big Block Mode value while in Sub Block Mode
when initializing. Fortunately, vm->bbm.bb_size maps to some counter
in the vm->sbm.mb_count array, which is 0 at that point in time.
No harm done; still, this was unintended and is not future-proof.
Fixes: 4ba50cd335 ("virtio-mem: Big Block Mode (BBM) memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3aadf2e16 ]
After device reset, the virtqueues are not ready so clear the ready
field.
Failing to do so can result in virtio_vdpa failing to load if the device
was previously used by vhost_vdpa and the old values are ready.
virtio_vdpa expects to find VQs in "not ready" state.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210606053128.170399-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab1016d39c ]
In error cases the dentry may be NULL.
Before 20798dfe24, the encoder also checked dentry and
d_really_is_positive(dentry), but that looks like overkill to me--zero
status should be enough to guarantee a positive dentry.
This isn't the first time we've seen an error-case NULL dereference
hidden in the initialization of a local variable in an xdr encoder. But
I went back through the other recent rewrites and didn't spot any
similar bugs.
Reported-by: JianHong Yin <jiyin@redhat.com>
Reviewed-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes: 20798dfe24 ("NFSD: Update the NFSv3 GETACL result encoder...")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b08cf62b1 ]
The double copy of the string is a mistake, plus __assign_str()
uses strlen(), which is wrong to do on a string that isn't
guaranteed to be NUL-terminated.
Fixes: 6019ce0742 ("NFSD: Add a tracepoint to record directory entry encoding")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 474bc33469 ]
When flushing out the unstable file writes as part of a COMMIT call, try
to perform most of of the data writes and waits outside the semaphore.
This means that if the client is sending the COMMIT as part of a memory
reclaim operation, then it can continue performing I/O, with contention
for the lock occurring only once the data sync is finished.
Fixes: 5011af4c69 ("nfsd: Fix stable writes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 934bd07fae ]
This was causing a "sleeping function called from invalid context"
warning.
I don't think we need the set_and_test_bit() here; clients move from
unconfirmed to confirmed only once, under the client_lock.
The (conf == unconf) is a way to check whether we're in that confirming
case, hopefully that's not too obscure.
Fixes: 472d155a06 "nfsd: report client confirmation status in "info" file"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 419ac82176 ]
Commit 91c960b005 ("bpf: Rename BPF_XADD and prepare to encode other
atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to
distinguish instructions based on the immediate field. Existing JIT
implementations were updated to check for the immediate field and to
reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH)
in the immediate field.
However, the check added to powerpc64 JIT did not look at the correct
BPF instruction. Due to this, such programs would be accepted and
incorrectly JIT'ed resulting in soft lockups, as seen with the atomic
bounds test. Fix this by looking at the correct immediate value.
Fixes: 91c960b005 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm")
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4117b430ffaa8cd7af042496f87fd7539e4f17fd.1625145429.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0755d3be2d ]
The sk_user_data pointer is supposed to be modified only while
holding the write_lock "sk_callback_lock", otherwise
we could race with other threads and crash the kernel.
we can't take the write_lock in nvmet_tcp_state_change()
because it would cause a deadlock, but the release_work queue
will set the pointer to NULL later so we can simply remove
the assignment.
Fixes: b5332a9f3f ("nvmet-tcp: fix incorrect locking in state_change sk callback")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2f966d0f ]
It's unsafe to operate a vq from multiple threads.
Unfortunately this is exactly what we do when invoking
clean tx poll from rx napi.
Same happens with napi-tx even without the
opportunistic cleaning from the receive interrupt: that races
with processing the vq in start_xmit.
As a fix move everything that deals with the vq to under tx lock.
Fixes: b92f1e6751 ("virtio-net: transmit napi")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d23dcdf21 ]
Before SF support was introduced, the DMA device was equal to
mdev->device which was in essence equal to pdev->dev.
With SF introduction this is no longer true. It has already been
handled for vhost_vdpa since the reference to the dma device can from
within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the
real dma device when initializing the device.
In addition, for the sake of consistency, previous references in the
code to the dma device are changed to vdev->dma_dev.
Fixes: d13a15d544 ("vdpa/mlx5: Use the correct dma device when registering memory")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210606053150.170489-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71ab6a7cfb ]
umem size is a 32 bit unsigned value so assigning it to an int could
cause false failures. Set the calculated value inside the function and
modify function name to reflect the fact it updates the size.
This bug was found during code review but never had real impact to this
date.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210530090349.8360-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3011776af ]
Fix copy paste bug assigning umem1 size to umem2 and umem3. The issue
was discovered when trying to use a 1:1 MR that covers the entire
address space where firmware complained that provided sizes are not
large enough. 1:1 MRs are required to support virtio_vdpa.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210530090317.8284-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83150f5d05 ]
Currently topology_scale_freq_tick() (which gets called from
scheduler_tick()) may end up using a pointer to "struct
scale_freq_data", which was previously cleared by
topology_clear_scale_freq_source(), as there is no protection in place
here. The users of topology_clear_scale_freq_source() though needs a
guarantee that the previously cleared scale_freq_data isn't used
anymore, so they can free the related resources.
Since topology_scale_freq_tick() is called from scheduler tick, we don't
want to add locking in there. Use the RCU update mechanism instead
(which is already used by the scheduler's utilization update path) to
guarantee race free updates here.
synchronize_rcu() makes sure that all RCU critical sections that started
before it is called, will finish before it returns. And so the callers
of topology_clear_scale_freq_source() don't need to worry about their
callback getting called anymore.
Cc: Paul E. McKenney <paulmck@kernel.org>
Fixes: 01e055c120 ("arch_topology: Allow multiple entities to provide sched_freq_tick() callback")
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67092eff2 ]
tegra_pcie_ep_raise_msi_irq() shifted a signed 32-bit value left by 31
bits. The behavior of this is implementation-defined.
Replace the shift by BIT(), which is well-defined.
Found by cppcheck:
$ cppcheck --enable=all drivers/pci/controller/dwc/pcie-tegra194.c
Checking drivers/pci/controller/dwc/pcie-tegra194.c ...
drivers/pci/controller/dwc/pcie-tegra194.c:1829:23: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour. See condition at line 1826. [shiftTooManyBitsSigned]
appl_writel(pcie, (1 << irq), APPL_MSI_CTRL_1);
^
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210618160219.303092-1-jonathanh@nvidia.com
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 132e320978 ]
This patch removes setting SBI_NEED_FSCK when GC gets an error on f2fs_iget,
since f2fs_iget can give ENOMEM and others by race condition.
If we set this critical fsck flag, we'll get EIO during fsync via the below
code path.
In f2fs_inplace_write_data(),
if (is_sbi_flag_set(sbi, SBI_NEED_FSCK) || f2fs_cp_error(sbi)) {
err = -EIO;
goto drop_bio;
}
Fixes: 9557727876 ("f2fs: drop inplace IO if fs status is abnormal")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eae00c5d6e ]
After calling security_sb_clone_mnt_opts() in nfs_get_root(), it's
necessary to copy the value of has_sec_mnt_opts from the cloned
super_block's nfs_server. Otherwise, calls to nfs_compare_super()
using this super_block may not return the correct result, leading to
mount failures.
For example, mounting an nfs server with the following in /etc/exports:
/export *(rw,insecure,crossmnt,no_root_squash,security_label)
and having /export/scratch on a separate block device.
mount -o v4.2,context=system_u:object_r:root_t:s0 server:/export/test /mnt/test
mount -o v4.2,context=system_u:object_r:swapfile_t:s0 server:/export/scratch /mnt/scratch
The second mount would fail with "mount.nfs: /mnt/scratch is busy or
already mounted or sharecache fail" and "SELinux: mount invalid. Same
superblock, different security settings for..." would appear in the
syslog.
Also while we're in there, replace several instances of "NFS_SB(s)"
with "server", which was already declared at the top of the
nfs_get_root().
Fixes: ec1ade6a04 ("nfs: account for selinux security context when deciding to share superblock")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bc6ea31cb ]
The .remove() callback disables clocks that were not enabled in
.probe(). So just probing and then unbinding the driver results in a clk
enable imbalance.
So just drop the call to disable the clocks. (Which BTW was also in the
wrong order because the call makes the PWM unfunctional and so should
have come only after pwmchip_remove()).
Fixes: 9f4c8f9607 ("pwm: imx: Add ipg clock operation")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9625895011 ]
The gap handling in copy_xstate_to_kernel() is wrong when XSAVES is in
use.
Using init_fpstate for copying the init state of features which are
not set in the xstate header is only correct for the legacy area, but
not for the extended features area because when XSAVES is in use then
init_fpstate is in compacted form which means the xstate offsets which
are used to copy from init_fpstate are not valid.
Fortunately, this is not a real problem today because all extended
features in use have an all-zeros init state, but it is wrong
nevertheless and with a potentially dynamically sized init_fpstate this
would result in an access outside of the init_fpstate.
Fix this by keeping track of the last copied state in the target buffer and
explicitly zero it when there is a feature or alignment gap.
Use the compacted offset when accessing the extended feature space in
init_fpstate.
As this is not a functional issue on older kernels this is intentionally
not tagged for stable.
Fixes: b8be15d588 ("x86/fpu/xstate: Re-enable XSAVES")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121451.294282032@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc1c56e9bb ]
If an RPC client is created without RPC_CLNT_CREATE_REUSEPORT, it should
not reuse the source port when a TCP connection is re-established.
This is currently implemented by preventing the source port being
recorded after a successful connection (the call to xs_set_srcport()).
However the source port is also recorded after a successful bind in xs_bind().
This may not be needed at all and certainly is not wanted when
RPC_CLNT_CREATE_REUSEPORT wasn't requested.
So avoid that assignment when xprt.reuseport is not set.
With this change, NFSv4.1 and later mounts use a different port number on
each connection. This is helpful with some firewalls which don't cope
well with port reuse.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: e6237b6feb ("NFSv4.1: Don't rebind to the same source port when reconnecting to the server")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2c2a622d4 ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 9ca2d73264 ("ubifs: Limit number of xattrs per inode")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 558f9b2f94 ]
GCC assumes that stack is aligned to 16-byte on call sites [1].
Since GCC 8, GCC began using 16-byte aligned SSE instructions to
implement assignments to structs on stack. When
CC_OPTIMIZE_FOR_PERFORMANCE is enabled, this affects
os-Linux/sigio.c, write_sigio_thread:
struct pollfds *fds, tmp;
tmp = current_poll;
Note that struct pollfds is exactly 16 bytes in size.
GCC 8+ generates assembly similar to:
movdqa (%rdi),%xmm0
movaps %xmm0,-0x50(%rbp)
This is an issue, because movaps will #GP if -0x50(%rbp) is not
aligned to 16 bytes [2], and how rbp gets assigned to is via glibc
clone thread_start, then function prologue, going though execution
trace similar to (showing only relevant instructions):
sub $0x10,%rsi
mov %rcx,0x8(%rsi)
mov %rdi,(%rsi)
syscall
pop %rax
pop %rdi
callq *%rax
push %rbp
mov %rsp,%rbp
The stack pointer always points to the topmost element on stack,
rather then the space right above the topmost. On push, the
pointer decrements first before writing to the memory pointed to
by it. Therefore, there is no need to have the stack pointer
pointer always point to valid memory unless the stack is poped;
so the `- sizeof(void *)` in the code is unnecessary.
On the other hand, glibc reserves the 16 bytes it needs on stack
and pops itself, so by the call instruction the stack pointer
is exactly the caller-supplied sp. It then push the 16 bytes of
the return address and the saved stack pointer, so the base
pointer will be 16-byte aligned if and only if the caller
supplied sp is 16-byte aligned. Therefore, the caller must supply
a 16-byte aligned pointer, which `stack + UM_KERN_PAGE_SIZE`
already satisfies.
On a side note, musl is unaffected by this issue because it forces
16 byte alignment via `and $-16,%rsi` in its clone wrapper.
Similarly, glibc i386 is also unaffected because it has
`andl $0xfffffff0, %ecx`.
To reproduce this bug, enable CONFIG_UML_RTC and
CC_OPTIMIZE_FOR_PERFORMANCE. uml_rtc will call
add_sigio_fd which will then cause write_sigio_thread to either go
into segfault loop or panic with "Segfault with no mm".
Similarly, signal stacks will be aligned by the host kernel upon
signal delivery. `- sizeof(void *)` to sigaltstack is
unconventional and extraneous.
On a related note, initialization of longjmp buffers do require
`- sizeof(void *)`. This is to account for the return address
that would have been pushed to the stack at the call site.
The reason for uml to respect 16-byte alignment, rather than
telling GCC to assume 8-byte alignment like the host kernel since
commit d9b0cde91c ("x86-64, gcc: Use
-mpreferred-stack-boundary=3 if supported"), is because uml links
against libc. There is no reason to assume libc is also compiled
with that flag and assumes 8-byte alignment rather than 16-byte.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=40838
[2] https://c9x.me/x86/html/file_module_x86_id_180.html
Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d1c0f3d28 ]
This seems to happen fairly easily during READ_PLUS testing on NFS v4.2.
I found that we could end up accessing xdr->buf->pages[pgnr] with a pgnr
greater than the number of pages in the array. So let's just return
early if we're setting base to a point at the end of the page data and
let xdr_set_tail_base() handle setting up the buffer pointers instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fixes: 8d86e373b0 ("SUNRPC: Clean up helpers xdr_set_iov() and xdr_set_page_base()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3731d44bba ]
Fix an Oopsable condition in pnfs_mark_request_commit() when we're
putting a set of writes on the commit list to reschedule them after a
failed pNFS attempt.
Fixes: 9c455a8c1e ("NFS/pNFS: Clean up pNFS commit operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd99e9f98f ]
Set up the connection to the NFSv4 server in nfs4_alloc_client(), before
we've added the struct nfs_client to the net-namespace's nfs_client_list
so that a downed server won't cause other mounts to hang in the trunking
detection code.
Reported-by: Michael Wakabayashi <mwakabayashi@vmware.com>
Fixes: 5c6e5b60aa ("NFS: Fix an Oops in the pNFS files and flexfiles connection setup to the DS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3076cd8d1 ]
The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt
line. Therefore, it is not actually part of the RT5033 MFD and needs
its own of_match_table to probe properly.
Also, given that it's independent of the MFD, there is actually
no need to make the Kconfig depend on MFD_RT5033. Although the driver
uses the shared <linux/mfd/rt5033.h> header, there is no compile
or runtime dependency on the RT5033 MFD driver.
Cc: Beomho Seo <beomho.seo@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Fixes: b847dd96e6 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdcdaa13ad ]
"utf16s_to_utf8s(..., buf, PAGE_SIZE)" puts up to PAGE_SIZE bytes into
"buf" and returns the number of bytes it actually put there. If it wrote
PAGE_SIZE bytes, the newline added by dsm_label_utf16s_to_utf8s() would
overrun "buf".
Reduce the size available for utf16s_to_utf8s() to use so there is always
space for the newline.
[bhelgaas: reorder patch in series, commit log]
Fixes: 6058989bad ("PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs")
Link: https://lore.kernel.org/r/20210603000112.703037-7-kw@linux.com
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 601423bc0c ]
The ac->state field is __le32, not u32. So change the variable we're
temporarily storing it in to __le32 as well.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e61ffb3445 ("power: supply: Add AC driver for Surface Aggregator Module")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e25e407a1 ]
A phys_addr_t may be wider than an int or pointer:
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_da_to_pa':
drivers/remoteproc/stm32_rproc.c:583:30: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t' {aka 'long long unsigned int'} [-Werror=format=]
583 | dev_dbg(dev, "da %llx to pa %#x\n", da, *pa);
Print it by reference using the special %pap format string.
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Fixes: 8a471396d2 ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210421140053.3727528-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dd571785d ]
As marcosfrm reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=213089
Initramfs generators rely on "pre" softdeps (and "depends") to include
additional required modules.
F2FS does not declare "pre: crc32" softdep. Then every generator (dracut,
mkinitcpio...) has to maintain a hardcoded list for this purpose.
Hence let's use MODULE_SOFTDEP("pre: crc32") in f2fs code.
Fixes: 43b6573bac ("f2fs: use cryptoapi crc32 functions")
Reported-by: marcosfrm <marcosfrm@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c0f0f3639 ]
Commit 013c1667cf ("kallsyms: refactor
{,module_}kallsyms_on_each_symbol") replaced the return inside the
nested loop with a break, changing the semantics of the function: the
break only exits the innermost loop, so the code continues iterating the
symbols of the next module instead of exiting.
Fixes: 013c1667cf ("kallsyms: refactor {,module_}kallsyms_on_each_symbol")
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jon Mediero <jmdr@disroot.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 937efa29e7 ]
With the original code a request for period = 65536000 ns and period =
32768000 ns yields the same register settings (which results in 32768000
ns) because the value for pwmc0 was miscalculated.
Also simplify using that fls(0) is 0.
Fixes: 721b595744 ("pwm: visconti: Add Toshiba Visconti SoC PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2beb4a53fc ]
The kernel pushes context on to the userspace stack to prepare for the
user's signal handler. When the user has supplied an alternate signal
stack, via sigaltstack(2), it is easy for the kernel to verify that the
stack size is sufficient for the current hardware context.
Check if writing the hardware context to the alternate stack will exceed
it's size. If yes, then instead of corrupting user-data and proceeding with
the original signal handler, an immediate SIGSEGV signal is delivered.
Refactor the stack pointer check code from on_sig_stack() and use the new
helper.
While the kernel allows new source code to discover and use a sufficient
alternate signal stack size, this check is still necessary to protect
binaries with insufficient alternate signal stack size from data
corruption.
Fixes: c2bc11f10a ("x86, AVX-512: Enable AVX-512 States Context Switch")
Reported-by: Florian Weimer <fweimer@redhat.com>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-6-chang.seok.bae@intel.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153531
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a948b1142c ]
Since commit 9a6944fee6 ("tracing: Add a verifier to check string
pointers for trace events"), which was merged in v5.13-rc1,
TP_printk() no longer tacitly supports the "%.*s" format specifier.
These are low value tracepoints, so just remove them.
Reported-by: David Wysochanski <dwysocha@redhat.com>
Fixes: dd5e3fbc1f ("NFSD: Add tracepoints to the NFSD state management code")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e633f33d26 ]
The battery subsystem of the Surface Aggregator Module EC requires us to
register the battery notifier with instance ID 0. However, battery
events are actually sent with the instance ID corresponding to the
device, which is nonzero. Thus, the strict-matching approach doesn't
work here and will discard events that the driver is expected to handle.
To fix this we have to fall back on notifier matching by target-category
only and have to manually check the instance ID in the notifier
callback.
Fixes: 167f77f7d0 ("power: supply: Add battery driver for Surface Aggregator Module")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d80c228d44 ]
On the IO submission path, blk_account_io_start() may interrupt
the system interruption. When the interruption returns, the value
of part->stamp may have been updated by other cores, so the time
value collected before the interruption may be less than part->
stamp. So when this happens, we should do nothing to make io_ticks
more accurate? For kernels less than 5.0, this may cause io_ticks
to become smaller, which in turn may cause abnormal ioutil values.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1625521646-1069-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 558d6450c7 ]
If a writeback of the superblock fails with an I/O error, the buffer
is marked not uptodate. However, this can cause a WARN_ON to trigger
when we attempt to write superblock a second time. (Which might
succeed this time, for cerrtain types of block devices such as iSCSI
devices over a flaky network.)
Try to detect this case in flush_stashed_error_work(), and also change
__ext4_handle_dirty_metadata() so we always set the uptodate flag, not
just in the nojournal case.
Before this commit, this problem can be repliciated via:
1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096'
2. mount /dev/mapper/dust1 /home/test
3. dmsetup message dust1 0 addbadblock 0 10
4. cd /home/test
5. echo "XXXXXXX" > t
After a few seconds, we got following warning:
[ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0
[ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write
[ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata
[ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0
[ 91.417038] ------------[ cut here ]------------
[ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e
[ 91.440322] Call Trace:
[ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220
[ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90
[ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0
[ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240
[ 91.443336] ? put_prev_entity+0x2a/0x200
[ 91.443856] ? kjournald2+0x12e/0x510
[ 91.444324] kjournald2+0x12e/0x510
[ 91.444773] ? woken_wake_function+0x30/0x30
[ 91.445326] kthread+0x150/0x1b0
[ 91.445739] ? commit_timeout+0x20/0x20
[ 91.446258] ? kthread_flush_worker+0xb0/0xb0
[ 91.446818] ret_from_fork+0x1f/0x30
[ 91.447293] ---[ end trace 66f0b6bf3d1abade ]---
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf5f7ab23 ]
An IRQ handler may be called at any time after it is registered, so
anything it relies on must be ready before registration.
rockchip_pcie_subsys_irq_handler() and rockchip_pcie_client_irq_handler()
read registers in the PCIe controller, but we registered them before
turning on clocks to the controller. If either is called before the clocks
are turned on, the register reads fail and the machine hangs.
Similarly, rockchip_pcie_legacy_int_handler() uses rockchip->irq_domain,
but we installed it before initializing irq_domain.
Register IRQ handlers after their data structures are initialized and
clocks are enabled.
Found by enabling CONFIG_DEBUG_SHIRQ, which calls the IRQ handler when it
is being unregistered. An error during the probe path might cause this
unregistration and IRQ handler execution before the device or data
structure init has finished.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210608080409.1729276-1-javierm@redhat.com
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9249c32ec9 ]
The Dell Vostro 3350 ACPI video-bus device reports spurious
ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE
events being reported to userspace (and causing trouble there).
Add a quirk setting the report_key_events mask to
REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE
events will be ignored, while still reporting brightness up/down
hotkey-presses to userspace normally.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1911763
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7718629432 ]
In function amba_handler_attach(), dev->res.name is initialized by
amba_device_alloc. But when address_found is false, dev->res.name is
assigned to null value, which leads to wrong resource name display in
/proc/iomem, "<BAD>" is seen for those resources.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86f7fa71cd ]
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
So drop the hardware modification from the .remove() callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fde25294df ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcdb4d904b ]
3 cases of kobj leak, which causes memory leak:
kobj_type must have release() method to free memory from release
callback. Don't need NULL default_attrs to init kobj.
sysfs files created under kobj_status should be removed with kobj_status
as parent kobject.
Remove queue sysfs files when releasing queue from process MMU notifier
release callback.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a06b912a5 ]
It turns out that the "T3 MRD" DMI_BOARD_NAME value is used in a lot of
different Cherry Trail x5-z8300 / x5-z8350 based Mini-PC / HDMI-stick
models from Ace PC / Meegopad / MinisForum / Wintel (and likely also
other vendors).
Most of the other DMI strings on these boxes unfortunately contain various
generic values like "Default string" or "$(DEFAULT_STRING)", so we cannot
match on them. These devices do have their chassis-type correctly set to a
value of "3" (desktop) which is a pleasant surprise, so also match on that.
This should avoid the quirk accidentally also getting applied to laptops /
tablets (which do actually have a battery). Although in my quite large
database of Bay and Cherry Trail based devices DMIdecode dumps I don't
have any laptops / tables with a board-name of "T3 MRD", so this should
not be an issue.
BugLink: https://askubuntu.com/questions/1206714/how-can-a-mini-pc-be-stopped-from-being-detected-as-a-laptop-with-a-battery/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfe52db13a ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 073b5d5b1f ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4465b3a621 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e97bc66377 ]
If a file has already been closed, then it should not be selected to
support further I/O.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[Trond: Fix an invalid pointer deref reported by Colin Ian King]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22d41cdcd3 ]
The checks for page->mapping are odd, as set_page_dirty is an
address_space operation, and I don't see where it would be called on a
non-pagecache page.
The warning about the page lock also seems bogus. The comment over
set_page_dirty() says that it can be called without the page lock in
some rare cases. I don't think we want to warn if that's the case.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fdec1b3c9 ]
Orangefs df output is whacky. Walt Ligon suggested this might fix it.
It seems way more in line with reality now...
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20cf7d4ea4 ]
If the change attribute update is declared to be non-atomic by the
server, or our cached value does not match the server's value before the
operation was performed, then we should declare the inode cache invalid.
On the other hand, if the change to the directory raced with a lookup or
getattr which already updated the change attribute, then optimise away
the revalidation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 213bb58475 ]
The inode is considered revalidated when we've checked the value of the
change attribute against our cached value since that suffices to
establish whether or not the other cached values are valid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aee8c67a4f ]
When *RSTOR from user memory raises an exception, there is no way to
differentiate them. That's bad because it forces the slow path even when
the failure was not a fault. If the operation raised eg. #GP then going
through the slow path is pointless.
Use _ASM_EXTABLE_FAULT() which stores the trap number and let the exception
fixup return the negated trap number as error.
This allows to separate the fast path and let it handle faults directly and
avoid the slow path for all other exceptions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121457.601480369@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15db16837a ]
Server responds to LOOKUP and other ops (READDIRPLUS/CREATE/MKNOD/...)
with ourarg containing nodeid and generation.
If a fuse inode is found in inode cache with the same nodeid but different
generation, the existing fuse inode should be unhashed and marked "bad" and
a new inode with the new generation should be hashed instead.
This can happen, for example, with passhrough fuse filesystem that returns
the real filesystem ino/generation on lookup and where real inode numbers
can get recycled due to real files being unlinked not via the fuse
passthrough filesystem.
With current code, this situation will not be detected and an old fuse
dentry that used to point to an older generation real inode, can be used to
access a completely new inode, which should be accessed only via the new
dentry.
Note that because the FORGET message carries the nodeid w/o generation, the
server should wait to get FORGET counts for the nlookup counts of the old
and reused inodes combined, before it can free the resources associated to
that nodeid.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d82ab251e ]
Even if POSIX doesn't mandate it, linux users legitimately expect sync() to
flush all data and metadata to physical storage when it is located on the
same system. This isn't happening with virtiofs though: sync() inside the
guest returns right away even though data still needs to be flushed from
the host page cache.
This is easily demonstrated by doing the following in the guest:
$ dd if=/dev/zero of=/mnt/foo bs=1M count=5K ; strace -T -e sync sync
5120+0 records in
5120+0 records out
5368709120 bytes (5.4 GB, 5.0 GiB) copied, 5.22224 s, 1.0 GB/s
sync() = 0 <0.024068>
and start the following in the host when the 'dd' command completes
in the guest:
$ strace -T -e fsync /usr/bin/sync virtiofs/foo
fsync(3) = 0 <10.371640>
There are no good reasons not to honor the expected behavior of sync()
actually: it gives an unrealistic impression that virtiofs is super fast
and that data has safely landed on HW, which isn't the case obviously.
Implement a ->sync_fs() superblock operation that sends a new FUSE_SYNCFS
request type for this purpose. Provision a 64-bit placeholder for possible
future extensions. Since the file server cannot handle the wait == 0 case,
we skip it to avoid a gratuitous roundtrip. Note that this is
per-superblock: a FUSE_SYNCFS is send for the root mount and for each
submount.
Like with FUSE_FSYNC and FUSE_FSYNCDIR, lack of support for FUSE_SYNCFS in
the file server is treated as permanent success. This ensures
compatibility with older file servers: the client will get the current
behavior of sync() not being propagated to the file server.
Note that such an operation allows the file server to DoS sync(). Since a
typical FUSE file server is an untrusted piece of software running in
userspace, this is disabled by default. Only enable it with virtiofs for
now since virtiofsd is supposedly trusted by the guest kernel.
Reported-by: Robert Krawitz <rlk@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb011044e3 ]
This was already attempted to fix via 1fccb73011: If the BIOS did not
enable TCO SMIs, the timer definitely needs to trigger twice in order to
cause a reboot. If TCO SMIs are on, as well as SMIs in general, we can
continue to assume that the BIOS will perform a reboot on the first
timeout.
QEMU with its ICH9 and related BIOS falls into the former category,
currently taking twice the configured timeout in order to reboot the
machine. For iTCO version that fall under turn_SMI_watchdog_clear_off,
this is also true and was currently only addressed for v1, irrespective
of the turn_SMI_watchdog_clear_off value.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/0b8bb307-d08b-41b5-696c-305cdac6789c@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fe55ef233 ]
Attempting to boot 32-bit ARM kernels under QEMU's 3.x virt models fails
when we have more than 512M of RAM in the model as we run out of vmalloc
space for the PCI ECAM regions. This failure will be silent when running
libvirt, as the console in that situation is a PCI device.
In this configuration, the kernel maps the whole ECAM, which QEMU sets up
for 256 buses, even when maybe only seven buses are in use. Each bus uses
1M of ECAM space, and ioremap() adds an additional guard page between
allocations. The kernel vmap allocator will align these regions to 512K,
resulting in each mapping eating 1.5M of vmalloc space. This means we need
384M of vmalloc space just to map all of these, which is very wasteful of
resources.
Fix this by only mapping the ECAM for buses we are going to be using. In
my setups, this is around seven buses in most guests, which is 10.5M of
vmalloc space - way smaller than the 384M that would otherwise be required.
This also means that the kernel can boot without forcing extra RAM into
highmem with the vmalloc= argument, or decreasing the virtual RAM available
to the guest.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/E1lhCAV-0002yb-50@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a97396c6eb ]
Downstream Port Containment (PCIe r5.0, sec. 6.2.10) disables the link upon
an error and attempts to re-enable it when instructed by the DPC driver.
A slot which is both DPC- and hotplug-capable is currently powered off by
pciehp once DPC is triggered (due to the link change) and powered back up
on successful recovery. That's undesirable, the slot should remain powered
so the hotplugged device remains bound to its driver. DPC notifies the
driver of the error and of successful recovery in pcie_do_recovery() and
the driver may then restore the device to working state.
Moreover, Sinan points out that turning off slot power by pciehp may foil
recovery by DPC: Power off/on is a cold reset concurrently to DPC's warm
reset. Sathyanarayanan reports extended delays or failure in link
retraining by DPC if pciehp brings down the slot.
Fix by detecting whether a Link Down event is caused by DPC and awaiting
recovery if so. On successful recovery, ignore both the Link Down and the
subsequent Link Up event.
Afterwards, check whether the link is down to detect surprise-removal or
another DPC event immediately after DPC recovery. Ensure that the
corresponding DLLSC event is not ignored by synthesizing it and invoking
irq_wake_thread() to trigger a re-run of pciehp_ist().
The IRQ threads of the hotplug and DPC drivers, pciehp_ist() and
dpc_handler(), race against each other. If pciehp is faster than DPC, it
will wait until DPC recovery completes.
Recovery consists of two steps: The first step (waiting for link
disablement) is recognizable by pciehp through a set DPC Trigger Status
bit. The second step (waiting for link retraining) is recognizable through
a newly introduced PCI_DPC_RECOVERING flag.
If DPC is faster than pciehp, neither of the two flags will be set and
pciehp may glean the recovery status from the new PCI_DPC_RECOVERED flag.
The flag is zero if DPC didn't occur at all, hence DLLSC events are not
ignored by default.
pciehp waits up to 4 seconds before assuming that DPC recovery failed and
bringing down the slot. This timeout is not taken from the spec (it
doesn't mandate one) but based on a report from Yicong Yang that DPC may
take a bit more than 3 seconds on HiSilicon's Kunpeng platform.
The timeout is necessary because the DPC Trigger Status bit may never
clear: On Root Ports which support RP Extensions for DPC, the DPC driver
polls the DPC RP Busy bit for up to 1 second before giving up on DPC
recovery. Without the timeout, pciehp would then wait indefinitely for DPC
to complete.
This commit draws inspiration from previous attempts to synchronize DPC
with pciehp:
By Sinan Kaya, August 2018:
https://lore.kernel.org/linux-pci/20180818065126.77912-1-okaya@kernel.org/
By Ethan Zhao, October 2020:
https://lore.kernel.org/linux-pci/20201007113158.48933-1-haifeng.zhao@intel.com/
By Kuppuswamy Sathyanarayanan, March 2021:
https://lore.kernel.org/linux-pci/59cb30f5e5ac6d65427ceaadf1012b2ba8dbf66c.1615606143.git.sathyanarayanan.kuppuswamy@linux.intel.com/
Link: https://lore.kernel.org/r/0be565d97438fe2a6d57354b3aa4e8626952a00b.1619857124.git.lukas@wunner.de
Reported-by: Sinan Kaya <okaya@kernel.org>
Reported-by: Ethan Zhao <haifeng.zhao@intel.com>
Reported-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be20037725 ]
If we're unable to immediately recover all locks because the server is
unable to immediately service our reclaim calls, then we want to retry
after we've finished servicing all the other asynchronous delegation
returns on our queue.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ec0c3ec2d ]
In order to use upstream_bridge_distance_warn() from a dma_map function, it
must not sleep. However, pci_get_slot() takes the pci_bus_sem so it might
sleep.
In order to avoid this, try to get the host bridge's device from the first
element in the device list. It should be impossible for the host bridge's
device to go away while references are held on child devices, so the first
element should not be able to change and, thus, this should be safe.
Introduce a static function called pci_host_bridge_dev() to obtain the host
bridge's root device.
Link: https://lore.kernel.org/r/20210610160609.28447-7-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed3443fb4d ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bb2314fc2 ]
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 14577/77836 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fbf6b731b ]
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 17047/77693 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d6e705027 ]
Previously, the last used PWM channel could change the global prescale
setting, even if other channels are already in use.
Fix it by only allowing the first enabled PWM to change the global
chip-wide prescale setting. If there is more than one channel in use,
the prescale settings resulting from the chosen periods must match.
GPIOs do not count as enabled PWMs as they are not using the prescaler
and can't change it.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94d2276320 ]
On removing the device, any work item (hv_pci_devices_present() or
hv_pci_eject_device()) scheduled on workqueue hbus->wq may still be running
and race with hv_pci_remove().
This can happen because the host may send PCI_EJECT or PCI_BUS_RELATIONS(2)
and decide to rescind the channel immediately after that.
Fix this by flushing/destroying the workqueue of hbus before doing hbus remove.
Link: https://lore.kernel.org/r/1620806800-30983-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9184a228d ]
The vendor code tree supplies platform data to enable he
USB charging for AB8500 and AB8500 and disable the AC
charging on the AB8505. This was missed when the driver
was submitted to the mainline kernel.
Fix this by doing what the vendor kernel does: always
register the USB charger, do not register the AC charger
on the AB8505.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bcb5087c9 ]
Sometimes the code will crash because we haven't enabled
AC or USB charging and thus not created the corresponding
psy device. Fix it by checking that it is there before
notifying.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c1f13a006 ]
The driver has problems with the different components of
the charging code racing with each other to probe().
This results in all four subdrivers populating battery
information to ascertain that it is populated for their
own needs for example.
Fix this by using component probing and thus expressing
to the kernel that these are dependent components.
The probes can happen in any order and will only acquire
resources such as state container, regulators and
interrupts and initialize the data structures, but no
execution happens until the .bind() callback is called.
The charging driver is the main component and binds
first, then bind in order the three subcomponents:
ab8500-fg, ab8500-btemp and ab8500-chargalg.
Do some housekeeping while we are moving the code around.
Like use devm_* for IRQs so as to cut down on some
boilerplate.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b601a18f12 ]
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
So drop the hardware modification from the .remove() callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aac79d14d ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 603fcfb9d4 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c484419ef ]
lz4 compatible decompressor is simple. The format is underspecified and
relies on EOF notification to determine when to stop. Initramfs buffer
format[1] explicitly states that it can have arbitrary number of zero
padding. Thus when operating without a fill function, be extra careful to
ensure that sizes less than 4, or apperantly empty chunksizes are treated
as EOF.
To test this I have created two cpio initrds, first a normal one,
main.cpio. And second one with just a single /test-file with content
"second" second.cpio. Then i compressed both of them with gzip, and with
lz4 -l. Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1
count=4). To create four testcase initrds:
1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
2) main.cpio.lz4 + extra.cpio.lz4 = pad0.lz4
3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
4) main.cpio.lz4 + pad4 + extra.cpio.lz4 = pad4.lz4
The pad4 test-cases replicate the initrd load by grub, as it pads and
aligns every initrd it loads.
All of the above boot, however /test-file was not accessible in the initrd
for the testcase #4, as decoding in lz4 decompressor failed. Also an
error message printed which usually is harmless.
Whith a patched kernel, all of the above testcases now pass, and
/test-file is accessible.
This fixes lz4 initrd decompress warning on every boot with grub. And
more importantly this fixes inability to load multiple lz4 compressed
initrds with grub. This patch has been shipping in Ubuntu kernels since
January 2021.
[1] ./Documentation/driver-api/early-userspace/buffer-format.rst
BugLink: https://bugs.launchpad.net/bugs/1835660
Link: https://lore.kernel.org/lkml/20210114200256.196589-1-xnox@ubuntu.com/ # v0
Link: https://lkml.kernel.org/r/20210513104831.432975-1-dimitri.ledkov@canonical.com
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Rajat Asthana <thisisrast7@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b64210f2f7 ]
If an i2c client receives an interrupt during reboot or shutdown it may
be too late to service it by making an i2c transaction on the bus
because the i2c controller has already been shutdown. This can lead to
system hangs if the i2c controller tries to make a transfer that is
doomed to fail because the access to the i2c pins is already shut down,
or an iommu translation has been torn down so i2c controller register
access doesn't work.
Let's simply disable the irq if there isn't a shutdown callback for an
i2c client when there is an irq associated with the device. This will
make sure that irqs don't come in later than the time that we can handle
it. We don't do this if the i2c client device already has a shutdown
callback because presumably they're doing the right thing and quieting
the device so irqs don't come in after the shutdown callback returns.
Reported-by: kernel test robot <lkp@intel.com>
[swboyd@chromium.org: Dropped newline, added commit text, added
interrupt.h for robot build error]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d0150db97 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa4db23233 ]
The devices in protocol version 2 has a register with flag for IEC 60958
signal detection as source of sampling clock without discrimination
between coaxial and optical interfaces. On the other hand, current
implementation of driver manage to interpret type of signal on optical
interface instead.
This commit fixes the detection of optical/coaxial interface for S/PDIF
signal.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9481a667a ]
According to <linux/backlight.h> .update_status() is supposed to
return 0 on success and a negative error code otherwise. Adapt
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to
actually do it.
While touching that also add the error code to the failure message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b5ddea9ce ]
The private->vol_updated flag was being checked outside of the
mutex_lock/unlock() of private->data_mutex leading to the volume data
being fetched twice from the device unnecessarily or old volume data
being returned.
Update scarlett2_*_ctl_get() and include the private->vol_updated flag
check inside the critical region.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164643.GA9216@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f605ee17f ]
The kernel test robot reports that the "screen_bits" splash screen data
is missing for the dragen platform:
arch/m68k/68000/dragen2.c:73:16: error: 'screen_bits' undeclared (first use in this function)
73 | LSSA = (long) screen_bits;
| ^~~~~~~~~~~
arch/m68k/68000/dragen2.c:73:16: note: each undeclared identifier is reported only once for each function it appears in
Digging around a bit I found the screen_bits data structure was originally
in a screen.h file that was generated from a screen.xbm file. That was
removed in commit 0c0e6db806 ("m68k: drop unused parts of 68VZ328
Makefile").
Other splash screen initializers for 68000 targets are kept here as the
C data structures so lets do the same for this one. Add the missing
screen.h file and include it in the dragen specific startup code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50ebe56222 ]
A user of FFADO project reported the issue of ToneWeal FW66. As a result,
the device is identified as one of applications of BeBoB solution.
I note that in the report the device returns contradictory result in plug
discovery process for audio subunit. Fortunately ALSA BeBoB driver doesn't
perform it thus it's likely to handle the device without issues.
I receive no reaction to test request for this patch yet, however it would
be worth to add support for it.
daniel@gibbonmoon:/sys/bus/firewire/devices/fw1$ grep -r . *
Binary file config_rom matches
dev:244:1
guid:0x0023270002000000
hardware_version:0x000002
is_local:0
model:0x020002
model_name:FW66
power/runtime_active_time:0
power/runtime_active_kids:0
power/runtime_usage:0
power/runtime_status:unsupported
power/async:disabled
power/runtime_suspended_time:0
power/runtime_enabled:disabled
power/control:auto
subsystem/drivers_autoprobe:1
uevent:MAJOR=244
uevent:MINOR=1
uevent:DEVNAME=fw1
units:0x00a02d:0x010001
vendor:0x002327
vendor_name:ToneWeal
fw1.0/uevent:MODALIAS=ieee1394:ven00002327mo00020002sp0000A02Dver00010001
fw1.0/power/runtime_active_time:0
fw1.0/power/runtime_active_kids:0
fw1.0/power/runtime_usage:0
fw1.0/power/runtime_status:unsupported
fw1.0/power/async:disabled
fw1.0/power/runtime_suspended_time:0
fw1.0/power/runtime_enabled:disabled
fw1.0/power/control:auto
fw1.0/model:0x020002
fw1.0/rom_index:15
fw1.0/specifier_id:0x00a02d
fw1.0/model_name:FW66
fw1.0/version:0x010001
fw1.0/modalias:ieee1394:ven00002327mo00020002sp0000A02Dver00010001
Cc: Daniel Jozsef <daniel.jozsef@gmail.com>
Reference: https://lore.kernel.org/alsa-devel/20200119164335.GA11974@workstation/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210619083922.16060-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cac7100d4c ]
Inside function hideep_nvm_unlock(), variable "unmask_code" could
be uninitialized if hideep_pgm_r_reg() returns error, however, it
is used in the later if statement after an "and" operation, which
is potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da90575767 ]
The tprot() inline asm temporarily changes the program check new psw
to redirect a potential program check on the diag instruction.
Restoring of the program check new psw is done in C code behind the
inline asm.
This can be problematic, especially if the function is inlined, since
the compiler can reorder instructions in such a way that a different
instruction, which may result in a program check, might be executed
before the program check new psw has been restored.
To avoid such a scenario move restoring into the inline asm. For
consistency reasons move also saving of the original program check new
psw into the inline asm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86807f348f ]
The __diag260() inline asm temporarily changes the program check new
psw to redirect a potential program check on the diag instruction.
Restoring of the program check new psw is done in C code behind the
inline asm.
This can be problematic, especially if the function is inlined, since
the compiler can reorder instructions in such a way that a different
instruction, which may result in a program check, might be executed
before the program check new psw has been restored.
To avoid such a scenario move restoring into the inline asm. For
consistency reasons move also saving of the original program check new
psw into the inline asm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88c2510cec ]
The __diag308() inline asm temporarily changes the program check new
psw to redirect a potential program check on the diag instruction.
Restoring of the program check new psw is done in C code behind the
inline asm.
This can be problematic, especially if the function is inlined, since
the compiler can reorder instructions in such a way that a different
instruction, which may result in a program check, might be executed
before the program check new psw has been restored.
To avoid such a scenario move restoring into the inline asm. For
consistency reasons move also saving of the original program check new
psw into the inline asm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c9a915afd ]
s390 is the only architecture which makes use of the __no_kasan_or_inline
attribute for two functions. Given that both stap() and __load_psw_mask()
are very small functions they can and should be always inlined anyway.
Therefore get rid of __no_kasan_or_inline and always inline these
functions.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5eb7bf0c4 ]
fix the following smatch warnings:
goya_pin_memory_before_cs()
warn: '&userptr->job_node' not removed from list
gaudi_pin_memory_before_cs()
warn: '&userptr->job_node' not removed from list
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f37510ca3 ]
When converting virtual address to physical we need to add correct
offset to the physical page.
For this we need to use mask that include ALL bits of page offset.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b92c637c5f ]
This fix was applied since there was an incorrect reported CPU ID to GIC
such that an error in MME2 QMAN aliased to be an arriving from DMA0_QM.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 190ec49710 ]
Fix issue in which the input to the function is_asic_secured was device
PCI_IDS number instead of the asic_type enumeration.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07d8ad6fd8 ]
Update _tlbiel_pid() such that we can avoid build errors like below when
using this function in other places.
arch/powerpc/mm/book3s64/radix_tlb.c: In function ‘__radix__flush_tlb_range_psize’:
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: warning: ‘asm’ operand 3 probably does not match constraints
114 | asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
| ^~~
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: error: impossible constraint in ‘asm’
make[4]: *** [scripts/Makefile.build:271: arch/powerpc/mm/book3s64/radix_tlb.o] Error 1
m
With this fix, we can also drop the __always_inline in __radix_flush_tlb_range_psize
which was added by commit e12d6d7d46 ("powerpc/mm/radix: mark __radix__flush_tlb_range_psize() as __always_inline")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210610083639.387365-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d49b3a0f3 ]
The On Semi pca9655 is a 16 bit variant of the On Semi pca9654 GPIO
expander, with 16 GPIOs and interrupt functionality.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
[Bartosz: fixed indentation as noted by Andy]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45677c9aeb ]
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52e1b3b3da ]
Hyper-V is observed to sometimes set multiple flags in the srb_status, such
as ABORTED and ERROR. Current code in storvsc_handle_error() handles only a
single flag being set, and does nothing when multiple flags are set. Fix
this by changing the case statement into a series of "if" statements
testing individual flags. The functionality for handling each flag is
unchanged.
Link: https://lore.kernel.org/r/1622827263-12516-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b18f901382 ]
DROM for USB4 host/device has a shorter header than Thunderbolt DROM
header. This patch addresses host/device with USB4 DROM (According to spec:
Universal Serial Bus 4 (USB4) Device ROM Specification, Rev 1.0, Feb-2021).
While there correct the data_len field to be 12 bits and rename
__unknown1 to reserved following the spec.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d7b72a63 ]
In two different instances the return value of "irq_get_irq_data"
API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any error.
Addresses-Coverity: "returned_null"
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a51b2fb94b ]
Return value of "pm_runtime_get_sync" API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any warning.
Addresses-Coverity: "check_return"
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1adf30f198 ]
arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the
refcount of the "smmu" even though the return value is less than 0.
The reference counting issue happens in some error handling paths of
arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get()
fails, the caller functions forget to decrease the refcount of "smmu"
increased by arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by calling pm_runtime_resume_and_get() instead of
pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount
balanced in case of failure.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1623293672-17954-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9733862e50 ]
Commit f959dcd6dd (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
ps3flash sb_01: ps3stor_setup:193: map DMA region failed
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.1622746428.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c305366a37 ]
snd_sb_qsound_destroy() contains the calls of removing the previously
created mixer controls, but it doesn't clear the pointers. As
snd_sb_qsound_destroy() itself may be repeatedly called via ioctl,
this could lead to double-free potentially.
Fix it by clearing the struct fields properly afterwards.
Link: https://lore.kernel.org/r/20210608140540.17885-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d3e5a0579 ]
This test will require /dev/rtc0, the default RTC device, or one
specified by user to run. Since this default RTC is not guaranteed to
exist on all of the devices, so check its existence first, otherwise
skip this test with the kselftest skip code 4.
Without this patch this test will fail like this on a s390x zVM:
$ selftests: timers: rtcpie
$ /dev/rtc0: No such file or directory
not ok 1 selftests: timers: rtcpie # exit=22
With this patch:
$ selftests: timers: rtcpie
$ Default RTC /dev/rtc0 does not exist. Test Skipped!
not ok 9 selftests: timers: rtcpie # SKIP
Fixed up change log so "With this patch" text doesn't get dropped.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d157fca711 ]
Remove the hack to assign the global console_port variable at probe time.
This assumption that cons->index is -1 is wrong for systems that specify
'console=' in the cmdline (or 'stdout-path' in dts). Hence, on such system
the actual console assignment is ignored, and the first UART that happens
to be probed is used as console instead.
Move the logic to console_setup() and map the console to the correct port
through the array of available ports instead.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20210528133321.1859346-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b3fc051cd ]
asking to advance by more than we have left in the iov_iter should
move to the very end; it should *not* leave negative i->count and
it should not spew into syslog, etc. - it's a legitimate operation.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b7cbe811c ]
We have started to get a bunch of pointless dmamask not set warnings
that makes the output of dmesg -l err,warn hard to read with many
extra warnings:
cpcap-regulator cpcap-regulator.0: DMA mask not set
cpcap_adc cpcap_adc.0: DMA mask not set
cpcap_battery cpcap_battery.0: DMA mask not set
cpcap-charger cpcap-charger.0: DMA mask not set
cpcap-pwrbutton cpcap-pwrbutton.0: DMA mask not set
cpcap-led cpcap-led.0: DMA mask not set
cpcap-led cpcap-led.1: DMA mask not set
cpcap-led cpcap-led.2: DMA mask not set
cpcap-led cpcap-led.3: DMA mask not set
cpcap-led cpcap-led.4: DMA mask not set
cpcap-rtc cpcap-rtc.0: DMA mask not set
cpcap-usb-phy cpcap-usb-phy.0: DMA mask not set
This seems to have started with commit 4d8bde883b ("OF: Don't set
default coherent DMA mask"). We have the parent SPI controller use
DMA, while CPCAP driver and it's children do not. For audio, the
DMA is handled over I2S bus with the McBSP driver.
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4700ef3265 ]
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2819b4ae28 ]
Drivers shouldn't be calling block/unblock session for tmf handling because
the functions can change the session state from under libiscsi.
iscsi_queuecommand's call to iscsi_prep_scsi_cmd_pdu->
iscsi_check_tmf_restrictions will prevent new cmds from being sent to qedi
after we've started handling a TMF. So we don't need to try and block it in
the driver, and we can remove these block calls.
Link: https://lore.kernel.org/r/20210525181821.7617-25-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ce002366a ]
If the SCSI cmd completes after qedi_tmf_work calls iscsi_itt_to_task then
the qedi qedi_cmd->task_id could be freed and used for another cmd. If we
then call qedi_iscsi_cleanup_task with that task_id we will be cleaning up
the wrong cmd.
Wait to release the task_id until the last put has been done on the
iscsi_task. Because libiscsi grabs a ref to the task when sending the
abort, we know that for the non-abort timeout case that the task_id we are
referencing is for the cmd that was supposed to be aborted.
A latter commit will fix the case where the abort times out while we are
running qedi_tmf_work.
Link: https://lore.kernel.org/r/20210525181821.7617-21-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdd4aad7ff ]
The iscsi offload drivers are setting the shost->max_id to the max number
of sessions they support. The problem is that max_id is not the max number
of targets but the highest identifier the targets can have. To use it to
limit the number of targets we need to set it to max sessions - 1, or we
can end up with a session we might not have preallocated resources for.
Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec29d0ac29 ]
If we haven't done a unbind target call we can race where
iscsi_conn_teardown wakes up the EH thread and then frees the conn while
those threads are still accessing the conn ehwait.
We can only do one TMF per session so this just moves the TMF fields from
the conn to the session. We can then rely on the
iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call
to remove the target and it's devices, and know after that point there is
no device or scsi-ml callout trying to access the session.
Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae6874ba4b ]
Consider the case where a VD is deleted and the targetID of that VD is
assigned to a newly created VD. If the sequence of deletion/addition of VD
happens very quickly there is a possibility that second event (VD add)
occurs even before the driver processes the first event (VD delete). As
event processing is done in deferred context the device list remains the
same (but targetID is re-used) so driver will not learn the VD
deletion/additon. I/Os meant for the older VD will be directed to new VD
which may lead to data corruption.
Make driver detect the deleted VD as soon as possible based on the RaidMap
update and block further I/O to that device.
Link: https://lore.kernel.org/r/20210528131307.25683-4-chandrakanth.patil@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8793613de9 ]
The description for scsi_mode_sense() claims to return the number of valid
bytes on success, which is not what the code does. Additionally there is
no gain in returning the SCSI status, as everything the callers do is to
check against scsi_result_is_good(), which is what scsi_mode_sense() does
already. So change the calling convention to return a standard error code
on failure, and 0 on success, and adapt the description and all callers.
Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e30d55137e ]
An 'unexpected timeout' message may be seen in a point-2-point topology.
The message occurs when a PLOGI is received before the driver is notified
of FLOGI completion. The FLOGI completion failure causes discovery to be
triggered for a second time. The discovery timer is restarted but no new
discovery activity is initiated, thus the timeout message eventually
appears.
In point-2-point, when discovery has progressed before the FLOGI completion
is processed, it is not a failure. Add code to FLOGI completion to detect
that discovery has progressed and exit the FLOGI handling (noop'ing it).
Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d6fb80a14 ]
This reverts commit 0edabdfe89.
I've explained that optional FireWire card for d.2 is also built-in to
d.2 Pro, however it's wrong. The optional card uses DM1000 ASIC and has
'Mackie DJ Mixer' in its model name of configuration ROM. On the other
hand, built-in FireWire card for d.2 Pro and d.4 Pro uses OXFW971 ASIC
and has 'd.Pro' in its model name according to manuals and user
experiences. The former card is not the card for d.2 Pro. They are similar
in appearance but different internally.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae3ce4942 ]
For improving readability, convert camelCase fields, variables and
functions to the plain names with underscore. Also align the macros
to be capital letters.
All done via sed, no functional changes.
Note that you'll still see many coding style issues even after this
patch; the fixes will follow.
Link: https://lore.kernel.org/r/20210517131545.27252-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 264da51243 ]
probe() error paths after runtime pm is enabled, should disable it.
remove() should not call pm_runtime_put_noidle() as there is no
matching get() to have raised the reference count. This case
has no affect a the runtime pm core protects against going negative.
Whilst here use pm_runtime_resume_and_get() to tidy things up a little.
coccicheck script didn't get this one due to complex code structure so
found by inspection.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210509113354.660190-12-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b1774998b ]
A simplification of get_unaligned() clashes with callers that pass
in a character pointer, causing a harmless warning like:
block/partitions/msdos.c: In function 'msdos_partition':
include/asm-generic/unaligned.h:13:22: warning: 'packed' attribute ignored for field of type 'u8' {aka 'unsigned char'} [-Wattributes]
Remove the SYS_IND() macro with the get_unaligned() call
and just use the ->ind field directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ce3e45cc3 ]
There is an issue with the ASPM(optional) capability checking function.
A device might be attached to root complex directly, in this case,
bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL.
Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's
ASPM capability and populate parent_cap_off, which will be used later by
alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do
here is to avoid checking the capability if we are on the root complex.
This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply
return when bring called, effectively disable ASPM for the device.
[ 1.246492] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 1.248731] RIP: 0010:pci_read_config_byte+0x5/0x40
[ 1.253998] Call Trace:
[ 1.254131] ? alcor_pci_find_cap_offset.isra.0+0x3a/0x100 [alcor_pci]
[ 1.254476] alcor_pci_probe+0x169/0x2d5 [alcor_pci]
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210513040732.1310159-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7272b591c4 ]
In ibmasm_init_one, it calls ibmasm_init_remote_input_dev().
Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are
allocated by input_allocate_device(), and assigned to
sp->remote.mouse_dev and sp->remote.keybd_dev respectively.
In the err_free_devices error branch of ibmasm_init_one,
mouse_dev and keybd_dev are freed by input_free_device(), and return
error. Then the execution runs into error_send_message error branch
of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called
to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.
My patch add a "error_init_remote" label to handle the error of
ibmasm_init_remote_input_dev(), to avoid the uaf bugs.
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210426170620.10546-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5b08386de ]
Our SoC's have always had a NS16650A UART core and older SoC's would
have a compatible string of: 'compatible = ""ns16550a"' and use the
8250_of driver. Our newer SoC's have added enhancements to the base
core to add support for DMA and accurate high speed baud rates and use
this newer 8250_bcm7271 driver. The Device Tree node for our enhanced
UARTs has a compatible string of: 'compatible = "brcm,bcm7271-uart",
"ns16550a"''. With both drivers running and the link order setup so
that the 8250_bcm7217 driver is initialized before the 8250_of driver,
we should bind the 8250_bcm7271 driver to the enhanced UART, or for
upstream kernels that don't have the 8250_bcm7271 driver, we bind to
the 8250_of driver.
The problem is that when both the 8250_of and 8250_bcm7271 drivers
were running, occasionally the 8250_of driver would be bound to the
enhanced UART instead of the 8250_bcm7271 driver. This was happening
because we use SCMI based clocks which come up late in initialization
and cause probe DEFER's when the two drivers get their clocks.
Occasionally the SCMI clock would become ready between the 8250_bcm7271
probe and the 8250_of probe and the 8250_of driver would be bound. To
fix this we decided to config only our 8250_bcm7271 driver and added
"ns16665a0" to the compatible string so the driver would work on our
older system.
This commit has of_platform_serial_probe() check specifically for the
"brcm,bcm7271-uart" and whether its companion driver is enabled. If it
is the case, and the clock provider is not ready, we want to make sure
that when the 8250_bcm7271.c driver returns EPROBE_DEFER, we are not
getting the UART registered via 8250_of.c.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210423183206.3917725-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cac2f6eb8 ]
SYSRQ doesn't work with DMA. This is because there is no error
indication whether a symbol had a framing error or not. Actually,
this is not completely correct, there is a bit in the data register
which is set in this case, but we'd have to read change the DMA access
to 16 bit and we'd need to post process the data, thus make the DMA
pointless in the first place.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210512141255.18277-10-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcb10ee27f ]
We should be very careful about the register values that will be used
for division or modulo operations, althrough the possibility that the
UARTBAUD register value is zero is very low, but we had better to deal
with the "bad data" of hardware in advance to avoid division or modulo
by zero leading to undefined kernel behavior.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20210427021226.27468-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b50bb8ba36 ]
If a device lost sync and can no longer ACK a command, it may not be
able to enter a lower-power state but it will still be able to resync
when the clock restarts. In those cases, we want to continue with the
clock stop sequence.
This patch modifies the behavior during clock stop sequences to only
log errors unrelated to -ENODATA/Command_Ignored. The flow is also
modified so that loops continue to prepare/deprepare other devices
even when one seems to have lost sync.
When resuming the clocks, all issues are logged with a dev_warn(),
previously only some of them were checked. This is the only part that
now differs between the clock stop entry and clock stop exit
sequences: while we don't want to stop the suspend flow, we do want
information on potential issues while resuming, as they may have
ripple effects.
For consistency the log messages are also modified to be unique and
self-explanatory. Errors in sdw_slave_clk_stop_callback() were
removed, they are now handled in the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210511030048.25622-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 345e9f5ca7 ]
Existing devices and implementations only support the required
CLOCK_STOP_MODE0. All the code related to CLOCK_STOP_MODE1 has not
been tested and is highly questionable, with a clear confusion between
CLOCK_STOP_MODE1 and the simple clock stop state machine.
This patch removes all usages of CLOCK_STOP_MODE1 - which has no
impact on any solution - and fixes the use of the simple clock stop
state machine. The resulting code should be a lot more symmetrical and
easier to maintain.
Note that CLOCK_STOP_MODE1 is not supported in the SoundWire Device
Class specification so it's rather unlikely that we need to re-add
this mode later.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210511030048.25622-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3066820034 ]
If another lockdep report runs concurrently with an RCU lockdep report
from RCU_LOCKDEP_WARN(), the following sequence of events can occur:
1. debug_lockdep_rcu_enabled() sees that lockdep is enabled
when called from (say) synchronize_rcu().
2. Lockdep is disabled by a concurrent lockdep report.
3. debug_lockdep_rcu_enabled() evaluates its lockdep-expression
argument, for example, lock_is_held(&rcu_bh_lock_map).
4. Because lockdep is now disabled, lock_is_held() plays it safe and
returns the constant 1.
5. But in this case, the constant 1 is not safe, because invoking
synchronize_rcu() under rcu_read_lock_bh() is disallowed.
6. debug_lockdep_rcu_enabled() wrongly invokes lockdep_rcu_suspicious(),
resulting in a false-positive splat.
This commit therefore changes RCU_LOCKDEP_WARN() to check
debug_lockdep_rcu_enabled() after checking the lockdep expression,
so that any "safe" returns from lock_is_held() are rejected by
debug_lockdep_rcu_enabled(). This requires memory ordering, which is
supplied by READ_ONCE(debug_locks). The resulting volatile accesses
prevent the compiler from reordering and the fact that only one variable
is being accessed prevents the underlying hardware from reordering.
The combination works for IA64, which can reorder reads to the same
location, but this is defeated by the volatile accesses, which compile
to load instructions that provide ordering.
Reported-by: syzbot+dde0cc33951735441301@syzkaller.appspotmail.com
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: syzbot+88e4f02896967fe1ab0d@syzkaller.appspotmail.com
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5befe842e ]
An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.
Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy. For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist. On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.
There are at least two bad possible outcomes to this:
1) a) A callback enqueued early on an srcu_data structure (call it
*sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
(say 3 levels).
b) The grace period ends after rcu_init_geometry() shrinks the
nodes level to a single one. srcu_gp_end() walks through the new
srcu_node hierarchy without ever reaching the old leaves so the
callback is never executed.
This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
verification never completes and the boot hangs:
[ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds.
[ 5413.147564] Not tainted 5.12.0-rc4+ #28
[ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000
[ 5413.168099] Call Trace:
[ 5413.170555] __schedule+0x36c/0x930
[ 5413.174057] ? wait_for_completion+0x88/0x110
[ 5413.178423] schedule+0x46/0xf0
[ 5413.181575] schedule_timeout+0x284/0x380
[ 5413.185591] ? wait_for_completion+0x88/0x110
[ 5413.189957] ? mark_held_locks+0x61/0x80
[ 5413.193882] ? mark_held_locks+0x61/0x80
[ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50
[ 5413.202173] ? wait_for_completion+0x88/0x110
[ 5413.206535] wait_for_completion+0xb4/0x110
[ 5413.210724] ? srcu_torture_stats_print+0x110/0x110
[ 5413.215610] srcu_barrier+0x187/0x200
[ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50
[ 5413.224244] ? rdinit_setup+0x2b/0x2b
[ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40
[ 5413.232700] do_one_initcall+0x63/0x310
[ 5413.236541] ? rdinit_setup+0x2b/0x2b
[ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80
[ 5413.244912] kernel_init_freeable+0x253/0x28f
[ 5413.249273] ? rest_init+0x250/0x250
[ 5413.252846] kernel_init+0xa/0x110
[ 5413.256257] ret_from_fork+0x22/0x30
2) An srcu_struct structure that is initialized before rcu_init_geometry()
and used afterward will always have stale rdp->mynode references,
resulting in callbacks to be missed in srcu_gp_end(), just like in
the previous scenario.
This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed. This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee522bcf02 ]
After device_get_match_data(), tlc591xx is not checked, add
check for it and also check np after dev_of_node.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 000b7287b6 upstream.
When an MRD advertisement is received on a bridge port with multicast
snooping enabled, we mark it as a router port automatically, that
includes adding that port to the router port list. The multicast lock
protects that list, but it is not acquired in the MRD advertisement case
leading to a race condition, we need to take it to fix the race.
Cc: stable@vger.kernel.org
Cc: linus.luessing@c0d3.blue
Fixes: 4b3087c7e3 ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04bef83a33 upstream.
When a PIM hello packet is received on a bridge port with multicast
snooping enabled, we mark it as a router port automatically, that
includes adding that port the router port list. The multicast lock
protects that list, but it is not acquired in the PIM message case
leading to a race condition, we need to take it to fix the race.
Cc: stable@vger.kernel.org
Fixes: 91b02d3d13 ("bridge: mcast: add router port on PIM hello message")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3769e4c0af upstream.
[Why]
After unplug/hotplug hub from the system, userspace might start to
clear stale payloads gradually. If we call drm_dp_mst_deallocate_vcpi()
to release stale VCPI of those ports which are not relating to current
topology, we have chane to wrongly clear active payload table entry for
current topology.
E.g.
We have allocated VCPI 1 in current payload table and we call
drm_dp_mst_deallocate_vcpi() to clean VCPI 1 in stale topology. In
drm_dp_mst_deallocate_vcpi(), it will call drm_dp_mst_put_payload_id()
tp put VCPI 1 and which means ID 1 is available again. Thereafter, if we
want to allocate a new payload stream, it will find ID 1 is available by
drm_dp_mst_assign_payload_id(). However, ID 1 is being used
[How]
Check target sink is relating to current topology or not before doing
any payload table update.
Searching upward to find the target sink's relevant root branch device.
If the found root branch device is not the same root of current
topology, don't update payload table.
Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Cc tag.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-3-Wayne.Lin@amd.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35d3e8cb35 upstream.
[Why]
When we receive CSN message to notify one port is disconnected, we will
implicitly set its corresponding num_slots to 0. Later on, we will
eventually call drm_dp_update_payload_part1() to arrange down streams.
In drm_dp_update_payload_part1(), we iterate over all proposed_vcpis[]
to do the update. Not specific to a target sink only. For example, if we
light up 2 monitors, Monitor_A and Monitor_B, and then we unplug
Monitor_B. Later on, when we call drm_dp_update_payload_part1() to try
to update payload for Monitor_A, we'll also implicitly clean payload for
Monitor_B at the same time. And finally, when we try to call
drm_dp_update_payload_part1() to clean payload for Monitor_B, we will do
nothing at this time since payload for Monitor_B has been cleaned up
previously.
For StarTech 1to3 DP hub, it seems like if we didn't update DPCD payload
ID table then polling for "ACT Handled"(BIT_1 of DPCD 002C0h) will fail
and this polling will last for 3 seconds.
Therefore, guess the best way is we don't set the proposed_vcpi[]
diretly. Let user of these herlper functions to set the proposed_vcpi
directly.
[How]
1. Revert commit 7617e9621b ("drm/dp_mst: clear time slots for ports
invalid")
2. Tackle the issue in previous commit by skipping those trasient
proposed VCPIs. These stale VCPIs shoulde be explicitly cleared by
user later on.
Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Fixed & Cc tags
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Fixes: 7617e9621b ("drm/dp_mst: clear time slots for ports invalid")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-2-Wayne.Lin@amd.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea32af47f0 upstream.
When syncing the log, if we fail to allocate the root node for the log
root tree:
1) We are unlocking fs_info->tree_log_mutex, but at this point we have
not yet locked this mutex;
2) We have locked fs_info->tree_root->log_mutex, but we end up not
unlocking it;
So fix this by unlocking fs_info->tree_root->log_mutex instead of
fs_info->tree_log_mutex.
Fixes: e75f9fd194 ("btrfs: zoned: move log tree node allocation out of log_root_tree->log_mutex")
CC: stable@vger.kernel.org # 5.13+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cc0b837e1 upstream.
If we can't acquire the reclaim_bgs_lock on block group reclaim, we
block until it is free. This can potentially stall for a long time.
While reclaim of block groups is necessary for a good user experience on
a zoned file system, there still is no need to block as it is best
effort only, just like when we're deleting unused block groups.
CC: stable@vger.kernel.org # 5.13
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79bd37120b upstream.
Commit eafa4fd0ad ("btrfs: fix exhaustion of the system chunk array
due to concurrent allocations") fixed a problem that resulted in
exhausting the system chunk array in the superblock when there are many
tasks allocating chunks in parallel. Basically too many tasks enter the
first phase of chunk allocation without previous tasks having finished
their second phase of allocation, resulting in too many system chunks
being allocated. That was originally observed when running the fallocate
tests of stress-ng on a PowerPC machine, using a node size of 64K.
However that commit also introduced a deadlock where a task in phase 1 of
the chunk allocation waited for another task that had allocated a system
chunk to finish its phase 2, but that other task was waiting on an extent
buffer lock held by the first task, therefore resulting in both tasks not
making any progress. That change was later reverted by a patch with the
subject "btrfs: fix deadlock with concurrent chunk allocations involving
system chunks", since there is no simple and short solution to address it
and the deadlock is relatively easy to trigger on zoned filesystems, while
the system chunk array exhaustion is not so common.
This change reworks the chunk allocation to avoid the system chunk array
exhaustion. It accomplishes that by making the first phase of chunk
allocation do the updates of the device items in the chunk btree and the
insertion of the new chunk item in the chunk btree. This is done while
under the protection of the chunk mutex (fs_info->chunk_mutex), in the
same critical section that checks for available system space, allocates
a new system chunk if needed and reserves system chunk space. This way
we do not have chunk space reserved until the second phase completes.
The same logic is applied to chunk removal as well, since it keeps
reserved system space long after it is done updating the chunk btree.
For direct allocation of system chunks, the previous behaviour remains,
because otherwise we would deadlock on extent buffers of the chunk btree.
Changes to the chunk btree are by large done by chunk allocation and chunk
removal, which first reserve chunk system space and then later do changes
to the chunk btree. The other remaining cases are uncommon and correspond
to adding a device, removing a device and resizing a device. All these
other cases do not pre-reserve system space, they modify the chunk btree
right away, so they don't hold reserved space for a long period like chunk
allocation and chunk removal do.
The diff of this change is huge, but more than half of it is just addition
of comments describing both how things work regarding chunk allocation and
removal, including both the new behavior and the parts of the old behavior
that did not change.
CC: stable@vger.kernel.org # 5.12+
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cb3db1cf3 upstream.
When a task attempting to allocate a new chunk verifies that there is not
currently enough free space in the system space_info and there is another
task that allocated a new system chunk but it did not finish yet the
creation of the respective block group, it waits for that other task to
finish creating the block group. This is to avoid exhaustion of the system
chunk array in the superblock, which is limited, when we have a thundering
herd of tasks allocating new chunks. This problem was described and fixed
by commit eafa4fd0ad ("btrfs: fix exhaustion of the system chunk array
due to concurrent allocations").
However there are two very similar scenarios where this can lead to a
deadlock:
1) Task B allocated a new system chunk and task A is waiting on task B
to finish creation of the respective system block group. However before
task B ends its transaction handle and finishes the creation of the
system block group, it attempts to allocate another chunk (like a data
chunk for an fallocate operation for a very large range). Task B will
be unable to progress and allocate the new chunk, because task A set
space_info->chunk_alloc to 1 and therefore it loops at
btrfs_chunk_alloc() waiting for task A to finish its chunk allocation
and set space_info->chunk_alloc to 0, but task A is waiting on task B
to finish creation of the new system block group, therefore resulting
in a deadlock;
2) Task B allocated a new system chunk and task A is waiting on task B to
finish creation of the respective system block group. By the time that
task B enter the final phase of block group allocation, which happens
at btrfs_create_pending_block_groups(), when it modifies the extent
tree, the device tree or the chunk tree to insert the items for some
new block group, it needs to allocate a new chunk, so it ends up at
btrfs_chunk_alloc() and keeps looping there because task A has set
space_info->chunk_alloc to 1, but task A is waiting for task B to
finish creation of the new system block group and release the reserved
system space, therefore resulting in a deadlock.
In short, the problem is if a task B needs to allocate a new chunk after
it previously allocated a new system chunk and if another task A is
currently waiting for task B to complete the allocation of the new system
chunk.
Unfortunately this deadlock scenario introduced by the previous fix for
the system chunk array exhaustion problem does not have a simple and short
fix, and requires a big change to rework the chunk allocation code so that
chunk btree updates are all made in the first phase of chunk allocation.
And since this deadlock regression is being frequently hit on zoned
filesystems and the system chunk array exhaustion problem is triggered
in more extreme cases (originally observed on PowerPC with a node size
of 64K when running the fallocate tests from stress-ng), revert the
changes from that commit. The next patch in the series, with a subject
of "btrfs: rework chunk allocation to avoid exhaustion of the system
chunk array" does the necessary changes to fix the system chunk array
exhaustion problem.
Reported-by: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://lore.kernel.org/linux-btrfs/20210621015922.ewgbffxuawia7liz@naota-xeon/
Fixes: eafa4fd0ad ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations")
CC: stable@vger.kernel.org # 5.12+
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54afaae34e upstream.
The types in calculation of the used percentage in the reclaiming
messages are both u64, though bg->length is either 1GiB (non-zoned) or
the zone size in the zoned mode. The upper limit on zone size is 8GiB so
this could theoretically overflow in the future, right now the values
fit.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.13
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abb99cfdaf upstream.
Damien reported a test failure with btrfs/209. The test itself ran fine,
but the fsck ran afterwards reported a corrupted filesystem.
The filesystem corruption happens because we're splitting an extent and
then writing the extent twice. We have to split the extent though, because
we're creating too large extents for a REQ_OP_ZONE_APPEND operation.
When dumping the extent tree, we can see two EXTENT_ITEMs at the same
start address but different lengths.
$ btrfs inspect dump-tree /dev/nullb1 -t extent
...
item 19 key (269484032 EXTENT_ITEM 126976) itemoff 15470 itemsize 53
refs 1 gen 7 flags DATA
extent data backref root FS_TREE objectid 257 offset 786432 count 1
item 20 key (269484032 EXTENT_ITEM 262144) itemoff 15417 itemsize 53
refs 1 gen 7 flags DATA
extent data backref root FS_TREE objectid 257 offset 786432 count 1
The duplicated EXTENT_ITEMs originally come from wrongly split extent_map in
extract_ordered_extent(). Since extract_ordered_extent() uses
create_io_em() to split an existing extent_map, we will have
split->orig_start != split->start. Then, it will be logged with non-zero
"extent data offset". Finally, the logged entries are replayed into
a duplicated EXTENT_ITEM.
Introduce and use proper splitting function for extent_map. The function is
intended to be simple and specific usage for extract_ordered_extent() e.g.
not supporting compression case (we do not allow splitting compressed
extent_map anyway).
There was a question raised by Qu, in summary why we want to split the
extent map (and not the bio):
The problem is not the limit on the zone end, which as you mention is
the same as the block group end. The problem is that data write use zone
append (ZA) operations. ZA BIOs cannot be split so a large extent may
need to be processed with multiple ZA BIOs, While that is also true for
regular writes, the major difference is that ZA are "nameless" write
operation giving back the written sectors on completion. And ZA
operations may be reordered by the block layer (not intentionally
though). Combine both of these characteristics and you can see that the
data for a large extent may end up being shuffled when written resulting
in data corruption and the impossibility to map the extent to some start
sector.
To avoid this problem, zoned btrfs uses the principle "one data extent
== one ZA BIO". So large extents need to be split. This is unfortunate,
but we can revisit this later and optimize, e.g. merge back together the
fragments of an extent once written if they actually were written
sequentially in the zone.
Reported-by: Damien Le Moal <damien.lemoal@wdc.com>
Fixes: d22002fd37 ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
CC: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 295cf15623 upstream.
Al reminds us that the usercopy API must only return complete failure
if absolutely nothing could be copied. Currently, if userspace does
something silly like giving us an unaligned pointer to Device memory,
or a size which overruns MTE tag bounds, we may fail to honour that
requirement when faulting on a multi-byte access even though a smaller
access could have succeeded.
Add a mitigation to the fixup routines to fall back to a single-byte
copy if we faulted on a larger access before anything has been written
to the destination, to guarantee making *some* forward progress. We
needn't be too concerned about the overall performance since this should
only occur when callers are doing something a bit dodgy in the first
place. Particularly broken userspace might still be able to trick
generic_perform_write() into an infinite loop by targeting write() at
an mmap() of some read-only device register where the fault-in load
succeeds but any store synchronously aborts such that copy_to_user() is
genuinely unable to make progress, but, well, don't do that...
CC: stable@vger.kernel.org
Reported-by: Chen Huang <chenhuang5@huawei.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/dc03d5c675731a1f24a62417dba5429ad744234e.1626098433.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b0462726e upstream.
The following sequence can be used to trigger a UAF:
int fscontext_fd = fsopen("cgroup");
int fd_null = open("/dev/null, O_RDONLY);
int fsconfig(fscontext_fd, FSCONFIG_SET_FD, "source", fd_null);
close_range(3, ~0U, 0);
The cgroup v1 specific fs parser expects a string for the "source"
parameter. However, it is perfectly legitimate to e.g. specify a file
descriptor for the "source" parameter. The fs parser doesn't know what
a filesystem allows there. So it's a bug to assume that "source" is
always of type fs_value_is_string when it can reasonably also be
fs_value_is_file.
This assumption in the cgroup code causes a UAF because struct
fs_parameter uses a union for the actual value. Access to that union is
guarded by the param->type member. Since the cgroup paramter parser
didn't check param->type but unconditionally moved param->string into
fc->source a close on the fscontext_fd would trigger a UAF during
put_fs_context() which frees fc->source thereby freeing the file stashed
in param->file causing a UAF during a close of the fd_null.
Fix this by verifying that param->type is actually a string and report
an error if not.
In follow up patches I'll add a new generic helper that can be used here
and by other filesystems instead of this error-prone copy-pasta fix.
But fixing it in here first makes backporting a it to stable a lot
easier.
Fixes: 8d2451f499 ("cgroup1: switch to option-by-option parsing")
Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@kernel.org>
Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2feeb52859 upstream.
The conversion to ww mutexes failed to address the fence code which
already returns -EDEADLK when we run out of fences. Ww mutexes on
the other hand treat -EDEADLK as an internal errno value indicating
a need to restart the operation due to a deadlock. So now when the
fence code returns -EDEADLK the higher level code erroneously
restarts everything instead of returning the error to userspace
as is expected.
To remedy this let's switch the fence code to use a different errno
value for this. -ENOBUFS seems like a semi-reasonable unique choice.
Apart from igt the only user of this I could find is sna, and even
there all we do is dump the current fence registers from debugfs
into the X server log. So no user visible functionality is affected.
If we really cared about preserving this we could of course convert
back to -EDEADLK higher up, but doesn't seem like that's worth
the hassle here.
Not quite sure which commit specifically broke this, but I'll
just attribute it to the general gem ww mutex work.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Testcase: igt/gem_pread/exhaustion
Testcase: igt/gem_pwrite/basic-exhaustion
Testcase: igt/gem_fenced_exec_thrash/too-many-fences
Fixes: 80f0b679d6 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630164413.25481-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 78d2ad7eb4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0abb33bfca upstream.
We skip filling out the pt with scratch entries if the va range covers
the entire pt, since we later have to fill it with the PTEs for the
object pages anyway. However this might leave open a small window where
the PTEs don't point to anything valid for the HW to consume.
When for example using 2M GTT pages this fill_px() showed up as being
quite significant in perf measurements, and ends up being completely
wasted since we ignore the pt and just use the pde directly.
Anyway, currently we have our PTE construction split between alloc and
insert, which is probably slightly iffy nowadays, since the alloc
doesn't actually allocate anything anymore, instead it just sets up the
page directories and points the PTEs at the scratch page. Later when we
do the insert step we re-program the PTEs again. Better might be to
squash the alloc and insert into a single step, then bringing back this
optimisation(along with some others) should be possible.
Fixes: 1482667324 ("drm/i915: Only initialize partially filled pagetables")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com
(cherry picked from commit 8f88ca76b3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b3bdd99c0 upstream.
On remote cable pull, a zfcp_port keeps its status and only gets
ZFCP_STATUS_PORT_LINK_TEST added. Only after an ADISC timeout, we would
actually start port recovery and remove ZFCP_STATUS_COMMON_UNBLOCKED which
zfcp_sysfs_port_fc_security_show() detected and reported as "unknown"
instead of the old and possibly stale zfcp_port->connection_info.
Add check for ZFCP_STATUS_PORT_LINK_TEST for timely "unknown" report.
Link: https://lore.kernel.org/r/20210702160922.2667874-1-maier@linux.ibm.com
Fixes: a17c784600 ("scsi: zfcp: report FC Endpoint Security in sysfs")
Cc: <stable@vger.kernel.org> #5.7+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93aa71ad73 upstream.
Commit 66a834d092 ("scsi: core: Fix error handling of scsi_host_alloc()")
changed the allocation logic to call put_device() to perform host cleanup
with the assumption that IDA removal and stopping the kthread would
properly be performed in scsi_host_dev_release(). However, in the unlikely
case that the error handler thread fails to spawn, shost->ehandler is set
to ERR_PTR(-ENOMEM).
The error handler cleanup code in scsi_host_dev_release() will call
kthread_stop() if shost->ehandler != NULL which will always be the case
whether the kthread was successfully spawned or not. In the case that it
failed to spawn this has the nasty side effect of trying to dereference an
invalid pointer when kthread_stop() is called. The following splat provides
an example of this behavior in the wild:
scsi host11: error handler thread failed to spawn, error = -4
Kernel attempted to read user page (10c) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x0000010c
Faulting instruction address: 0xc00000000818e9a8
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region
hash dm_log dm_mod fuse overlay squashfs loop
CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1
NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8
REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28228228
XER: 20040001
CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0
GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc
GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000
GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff
GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0
GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288
GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898
GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000
GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc
NIP [c00000000818e9a8] kthread_stop+0x38/0x230
LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160
Call Trace:
[c000000033bb2c48] 0xc000000033bb2c48 (unreliable)
[c0000000089846e8] scsi_host_dev_release+0x98/0x160
[c00000000891e960] device_release+0x60/0x100
[c0000000087e55c4] kobject_release+0x84/0x210
[c00000000891ec78] put_device+0x28/0x40
[c000000008984ea4] scsi_host_alloc+0x314/0x430
[c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi]
[c000000008110104] vio_bus_probe+0xa4/0x4b0
[c00000000892a860] really_probe+0x140/0x680
[c00000000892aefc] driver_probe_device+0x15c/0x200
[c00000000892b63c] device_driver_attach+0xcc/0xe0
[c00000000892b740] __driver_attach+0xf0/0x200
[c000000008926f28] bus_for_each_dev+0xa8/0x130
[c000000008929ce4] driver_attach+0x34/0x50
[c000000008928fc0] bus_add_driver+0x1b0/0x300
[c00000000892c798] driver_register+0x98/0x1a0
[c00000000810eb60] __vio_register_driver+0x80/0xe0
[c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi]
[c0000000080121d0] do_one_initcall+0x60/0x2d0
[c000000008261abc] do_init_module+0x7c/0x320
[c000000008265700] load_module+0x2350/0x25b0
[c000000008265cb4] __do_sys_finit_module+0xd4/0x160
[c000000008031110] system_call_exception+0x150/0x2d0
[c00000000800d35c] system_call_common+0xec/0x278
Fix this be nulling shost->ehandler when the kthread fails to spawn.
Link: https://lore.kernel.org/r/20210701195659.3185475-1-tyreld@linux.ibm.com
Fixes: 66a834d092 ("scsi: core: Fix error handling of scsi_host_alloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 896707c212 upstream.
Kernel never sends real INIT even to CPUs, other than on boot.
Thus INIT interception is an error which should be caught
by a check for an unknown VMexit reason.
On top of that, the current INIT VM exit handler skips
the current instruction which is wrong.
That was added in commit 5ff3a351f6 ("KVM: x86: Move trivial
instruction-based exit handlers to common code").
Fixes: 5ff3a351f6 ("KVM: x86: Move trivial instruction-based exit handlers to common code")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-3-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 991afbbee8 upstream.
Commit 5ff3a351f6 ("KVM: x86: Move trivial instruction-based
exit handlers to common code"), unfortunately made a mistake of
treating nop_on_interception and nop_interception in the same way.
Former does truly nothing while the latter skips the instruction.
SMI VM exit handler should do nothing.
(SMI itself is handled by the host when we do STGI)
Fixes: 5ff3a351f6 ("KVM: x86: Move trivial instruction-based exit handlers to common code")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f85d401606 upstream.
When the host is using debug registers but the guest is not using them
nor is the guest in guest-debug state, the kvm code does not reset
the host debug registers before kvm_x86->run(). Rather, it relies on
the hardware vmentry instruction to automatically reset the dr7 registers
which ensures that the host breakpoints do not affect the guest.
This however violates the non-instrumentable nature around VM entry
and exit; for example, when a host breakpoint is set on vcpu->arch.cr2,
Another issue is consistency. When the guest debug registers are active,
the host breakpoints are reset before kvm_x86->run(). But when the
guest debug registers are inactive, the host breakpoints are delayed to
be disabled. The host tracing tools may see different results depending
on what the guest is doing.
To fix the problems, we clear %db7 unconditionally before kvm_x86->run()
if the host has set any breakpoints, no matter if the guest is using
them or not.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210628172632.81029-1-jiangshanlai@gmail.com>
Cc: stable@vger.kernel.org
[Only clear %db7 instead of reloading all debug registers. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fce7e152ff upstream.
APM states that #GP is raised upon write to MSR_VM_HSAVE_PA when
the supplied address is not page-aligned or is outside of "maximum
supported physical address for this implementation".
page_address_valid() check seems suitable. Also, forcefully page-align
the address when it's written from VMM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[Add comment about behavior for host-provided values. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76ff371b67 upstream.
Don't clear the C-bit in the #NPF handler, as it is a legal GPA bit for
non-SEV guests, and for SEV guests the C-bit is dropped before the GPA
hits the NPT in hardware. Clearing the bit for non-SEV guests causes KVM
to mishandle #NPFs with that collide with the host's C-bit.
Although the APM doesn't explicitly state that the C-bit is not reserved
for non-SEV, Tom Lendacky confirmed that the following snippet about the
effective reduction due to the C-bit does indeed apply only to SEV guests.
Note that because guest physical addresses are always translated
through the nested page tables, the size of the guest physical address
space is not impacted by any physical address space reduction indicated
in CPUID 8000_001F[EBX]. If the C-bit is a physical address bit however,
the guest physical address space is effectively reduced by 1 bit.
And for SEV guests, the APM clearly states that the bit is dropped before
walking the nested page tables.
If the C-bit is an address bit, this bit is masked from the guest
physical address when it is translated through the nested page tables.
Consequently, the hypervisor does not need to be aware of which pages
the guest has chosen to mark private.
Note, the bogus C-bit clearing was removed from legacy #PF handler in
commit 6d1b867d04 ("KVM: SVM: Don't strip the C-bit from CR2 on #PF
interception").
Fixes: 0ede79e132 ("KVM: SVM: Clear C-bit from the page fault address")
Cc: Peter Gonda <pgonda@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210625020354.431829-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc9bf2e087 upstream.
Ignore "dynamic" host adjustments to the physical address mask when
generating the masks for guest PTEs, i.e. the guest PA masks. The host
physical address space and guest physical address space are two different
beasts, e.g. even though SEV's C-bit is the same bit location for both
host and guest, disabling SME in the host (which clears shadow_me_mask)
does not affect the guest PTE->GPA "translation".
For non-SEV guests, not dropping bits is the correct behavior. Assuming
KVM and userspace correctly enumerate/configure guest MAXPHYADDR, bits
that are lost as collateral damage from memory encryption are treated as
reserved bits, i.e. KVM will never get to the point where it attempts to
generate a gfn using the affected bits. And if userspace wants to create
a bogus vCPU, then userspace gets to deal with the fallout of hardware
doing odd things with bad GPAs.
For SEV guests, not dropping the C-bit is technically wrong, but it's a
moot point because KVM can't read SEV guest's page tables in any case
since they're always encrypted. Not to mention that the current KVM code
is also broken since sme_me_mask does not have to be non-zero for SEV to
be supported by KVM. The proper fix would be to teach all of KVM to
correctly handle guest private memory, but that's a task for the future.
Fixes: d0ec49d4de ("kvm/x86/svm: Support Secure Memory Encryption within KVM")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-5-seanjc@google.com>
[Use a new header instead of adding header guards to paging_tmpl.h. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e39f00f60e upstream.
Use boot_cpu_data.x86_phys_bits instead of the raw CPUID information to
enumerate the MAXPHYADDR for KVM guests when TDP is disabled (the guest
version is only relevant to NPT/TDP).
When using shadow paging, any reductions to the host's MAXPHYADDR apply
to KVM and its guests as well, i.e. using the raw CPUID info will cause
KVM to misreport the number of PA bits available to the guest.
Unconditionally zero out the "Physical Address bit reduction" entry.
For !TDP, the adjustment is already done, and for TDP enumerating the
host's reduction is wrong as the reduction does not apply to GPAs.
Fixes: 9af9b94068 ("x86/cpu/AMD: Handle SME reduction in physical address size")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bf48e3c0a upstream.
Ignore the guest MAXPHYADDR reported by CPUID.0x8000_0008 if TDP, i.e.
NPT, is disabled, and instead use the host's MAXPHYADDR. Per AMD'S APM:
Maximum guest physical address size in bits. This number applies only
to guests using nested paging. When this field is zero, refer to the
PhysAddrSize field for the maximum guest physical address size.
Fixes: 24c82e576b ("KVM: Sanitize cpuid")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 506c1da44f upstream.
We recently fixed DNS resolution of the server hostname during reconnect.
However, server IP address may change, even when the old one continues
to server (although sub-optimally).
We should schedule the next DNS resolution based on the TTL of
the DNS record used for the last resolution. This way, we resolve the
server hostname again when a DNS record expires.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cad83c968c upstream.
As syzbot reported, there is an use-after-free issue during f2fs recovery:
Use-after-free write at 0xffff88823bc16040 (in kfence-#10):
kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486
f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869
f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945
mount_bdev+0x26c/0x3a0 fs/super.c:1367
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1497
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x196f/0x2be0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is multi f2fs filesystem instances can race on accessing
global fsync_entry_slab pointer, result in use-after-free issue of slab
cache, fixes to init/destroy this slab cache only once during module
init/destroy procedure to avoid this issue.
Reported-by: syzbot+9d90dad32dd9727ed084@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b53cca764 upstream.
As seen from a recent syzbot bug report, mistakes in the compat ioctl
implementation can lead to uninitialized kernel stack data getting used
as input for driver ioctl handlers.
The reported bug is now fixed, but it's possible that other related
bugs are still present or get added in the future. As the drivers need
to check user input already, the possible impact is fairly low, but it
might still cause an information leak.
To be on the safe side, always clear the entire ioctl buffer before
calling the conversion handler functions that are meant to initialize
them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 867de40c4c upstream.
SSDs perform badly with sub-4k writes (because they perfrorm
read-modify-write internally), so make sure writecache writes at least
4k when committing.
Fixes: 991bd8d7bc ("dm writecache: commit just one block, not a full page")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c6e097629 upstream.
The Elgato Cam Link 4K HDMI video capture card reports to support three
different pixel formats, where the first format depends on the connected
HDMI device.
```
$ v4l2-ctl -d /dev/video0 --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture
[0]: 'NV12' (Y/CbCr 4:2:0)
Size: Discrete 3840x2160
Interval: Discrete 0.033s (29.970 fps)
[1]: 'NV12' (Y/CbCr 4:2:0)
Size: Discrete 3840x2160
Interval: Discrete 0.033s (29.970 fps)
[2]: 'YU12' (Planar YUV 4:2:0)
Size: Discrete 3840x2160
Interval: Discrete 0.033s (29.970 fps)
```
Changing the pixel format to anything besides the first pixel format
does not work:
```
$ v4l2-ctl -d /dev/video0 --try-fmt-video pixelformat=YU12
Format Video Capture:
Width/Height : 3840/2160
Pixel Format : 'NV12' (Y/CbCr 4:2:0)
Field : None
Bytes per Line : 3840
Size Image : 12441600
Colorspace : sRGB
Transfer Function : Rec. 709
YCbCr/HSV Encoding: Rec. 709
Quantization : Default (maps to Limited Range)
Flags :
```
User space applications like VLC might show an error message on the
terminal in that case:
```
libv4l2: error set_fmt gave us a different result than try_fmt!
```
Depending on the error handling of the user space applications, they
might display a distorted video, because they use the wrong pixel format
for decoding the stream.
The Elgato Cam Link 4K responds to the USB video probe
VS_PROBE_CONTROL/VS_COMMIT_CONTROL with a malformed data structure: The
second byte contains bFormatIndex (instead of being the second byte of
bmHint). The first byte is always zero. The third byte is always 1.
The firmware bug was reported to Elgato on 2020-12-01 and it was
forwarded by the support team to the developers as feature request.
There is no firmware update available since then. The latest firmware
for Elgato Cam Link 4K as of 2021-03-23 has MCU 20.02.19 and FPGA 67.
Therefore correct the malformed data structure for this device. The
change was successfully tested with VLC, OBS, and Chromium using
different pixel formats (YUYV, NV12, YU12), resolutions (3840x2160,
1920x1080), and frame rates (29.970 and 59.940 fps).
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Drung <bdrung@posteo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4bb4d425b upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the single zero-length control request which was using the
read-register helper, and update the helper so that zero-length reads
fail with an error message instead.
Fixes: 6a7eba24e4 ("V4L/DVB (8157): gspca: all subdrivers")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53ae298fde upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the USB_REQ_SYNCH_FRAME request which erroneously used
usb_sndctrlpipe().
Fixes: 27d35fc3fb ("V4L/DVB (10639): gspca - sq905: New subdriver.")
Cc: stable@vger.kernel.org # 2.6.30
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c8b9a9be2 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the control requests which erroneously used usb_rcvctrlpipe().
Fixes: 8466028be7 ("V4L/DVB (8734): Initial support for AME DTV-5100 USB2.0 DVB-T")
Cc: stable@vger.kernel.org # 2.6.28
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da3a1858c3 upstream.
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
There is a bug at ccs_pm_get_init(): when this function returns
an error, the stream is not started, and RPM usage_count
should not be incremented. However, if the calls to
v4l2_ctrl_handler_setup() return errors, it will be kept
incremented.
At ccs_suspend() the best is to replace it by the new
pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter automatically,
in the case of errors.
Fixes: 96e3a6b92f ("media: smiapp: Avoid maintaining power state information")
Cc: stable@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a7790be18 upstream.
The saa6588_ioctl() function expects to get called from other kernel
functions with a 'saa6588_command' pointer, but I found nothing stops it
from getting called from user space instead, which seems rather dangerous.
The same thing happens in the davinci vpbe driver with its VENC_GET_FLD
command.
As a quick fix, add a separate .command() callback pointer for this
driver and change the two callers over to that. This change can easily
get backported to stable kernels if necessary, but since there are only
two drivers, we may want to eventually replace this with a set of more
specialized callbacks in the long run.
Fixes: c3fda7f835 ("V4L/DVB (10537): saa6588: convert to v4l2_subdev.")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f71a409fe upstream.
Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243):
The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it
should read 11ABh.
The firmware can write the correct value, 11ABh, through VEND_ID
(RD0076044h [15:0]).
Implement this workaround in aardvark driver for both PCI vendor id and PCI
subsystem vendor id.
This change affects and fixes PCI vendor id of emulated PCIe root bridge.
After this change emulated PCIe root bridge has correct vendor id.
Link: https://lore.kernel.org/r/20210624222621.4776-5-pali@kernel.org
Fixes: 8a3ebd8de3 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4694ae373d upstream.
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the
external monitor no longer being detected, a stacktrace, and errors like
this in dmesg:
pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible)
The reason is that we know how to turn power to the Thunderbolt controller
*off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power
back on. We have to rely on firmware to turn the power back on.
When going to the "suspend-to-idle" or "standby" system sleep states,
firmware is not involved either on the suspend side or the resume side, so
we can't use SXIO/SXFP/SXLF to turn the power off.
Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when
we're going to the "suspend-to-idle" or "standby" system sleep states.
Fixes: 1df5172c5c ("PCI: Suspend/resume quirks for Apple thunderbolt")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767
Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6e58b5466 upstream.
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds
Signed-off-by: Hou Tao <houtao1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee55b92a73 upstream.
Commit d53f1fafec ("dm writecache: do
direct write if the cache is full") changed dm-writecache, so that it
writes directly to the origin device if the cache is full.
Unfortunately, it doesn't forward flush requests to the origin device,
so that there is a bug where flushes are being ignored.
Fix this by adding missing flush forwarding.
For PMEM mode, we fix this bug by disabling direct writes to the origin
device, because it performs better.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: d53f1fafec ("dm writecache: do direct write if the cache is full")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bab6849942 upstream.
The dm-zoned target cannot support zoned block devices with zones that
have a capacity smaller than the zone size (e.g. NVMe zoned namespaces)
due to the current chunk zone mapping implementation as it is assumed
that zones and chunks have the same size with all blocks usable.
If a zoned drive is found to have zones with a capacity different from
the zone size, fail the target initialization.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fae8a946a upstream.
commit 6f755e85c3 ("coresight: Add helper for inserting synchronization
packets") removed trailing '\0' from barrier_pkt array and updated the
call sites like etb_update_buffer() to have proper checks for barrier_pkt
size before read but missed updating tmc_update_etf_buffer() which still
reads barrier_pkt past the array size resulting in KASAN out-of-bounds
bug. Fix this by adding a check for barrier_pkt size before accessing
like it is done in etb_update_buffer().
BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698
Read of size 4 at addr ffffffd05b7d1030 by task perf/2629
Call trace:
dump_backtrace+0x0/0x27c
show_stack+0x20/0x2c
dump_stack+0x11c/0x188
print_address_description+0x3c/0x4a4
__kasan_report+0x140/0x164
kasan_report+0x10/0x18
__asan_report_load4_noabort+0x1c/0x24
tmc_update_etf_buffer+0x4b8/0x698
etm_event_stop+0x248/0x2d8
etm_event_del+0x20/0x2c
event_sched_out+0x214/0x6f0
group_sched_out+0xd0/0x270
ctx_sched_out+0x2ec/0x518
__perf_event_task_sched_out+0x4fc/0xe6c
__schedule+0x1094/0x16a0
preempt_schedule_irq+0x88/0x170
arm64_preempt_schedule_irq+0xf0/0x18c
el1_irq+0xe8/0x180
perf_event_exec+0x4d8/0x56c
setup_new_exec+0x204/0x400
load_elf_binary+0x72c/0x18c0
search_binary_handler+0x13c/0x420
load_script+0x500/0x6c4
search_binary_handler+0x13c/0x420
exec_binprm+0x118/0x654
__do_execve_file+0x77c/0xba4
__arm64_compat_sys_execve+0x98/0xac
el0_svc_common+0x1f8/0x5e0
el0_svc_compat_handler+0x84/0xb0
el0_svc_compat+0x10/0x50
The buggy address belongs to the variable:
barrier_pkt+0x10/0x40
Memory state around the buggy address:
ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03
^
ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa
ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa
==================================================================
Link: https://lore.kernel.org/r/20210505093430.18445-1-saiprakash.ranjan@codeaurora.org
Fixes: 0c3fc4d5fa ("coresight: Add barrier packet for synchronisation")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210614175901.532683-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9272e5d002 upstream.
In the out_err_bus_register error branch of tpci200_pci_probe,
tpci200->info->cfg_regs is freed by tpci200_uninstall()->
tpci200_unregister()->pci_iounmap(..,tpci200->info->cfg_regs)
in the first time.
But later, iounmap() is called to free tpci200->info->cfg_regs
again.
My patch sets tpci200->info->cfg_regs to NULL after tpci200_uninstall()
to avoid the double free.
Fixes: cea2f7cdff ("Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode")
Cc: stable <stable@vger.kernel.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210524093205.8333-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4030a6e6a6 upstream.
Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that
on systems where pid_max is configured higher than PID_MAX_DEFAULT the
ftrace record-tgid option doesn't work so well. Any tasks with PIDs
higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and
don't show up in the saved_tgids file.
In particular since systemd v243 & above configure pid_max to its
highest possible 1<<22 value by default on 64 bit systems this renders
the record-tgids option of little use.
Increase the size of tgid_map to the configured pid_max instead,
allowing it to cover the full range of PIDs up to the maximum value of
PID_MAX_LIMIT if the system is configured that way.
On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the
size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in
memory overhead sounds significant 64 bit systems are presumably best
placed to accommodate it, and since tgid_map is only allocated when the
record-tgid option is actually used presumably the user would rather it
spends sufficient memory to actually record the tgids they expect.
The size of tgid_map could also increase for CONFIG_BASE_SMALL=y
configurations, but these seem unlikely to be systems upon which people
are both configuring a large pid_max and running ftrace with record-tgid
anyway.
Of note is that we only allocate tgid_map once, the first time that the
record-tgid option is enabled. Therefore its size is only set once, to
the value of pid_max at the time the record-tgid option is first
enabled. If a user increases pid_max after that point, the saved_tgids
file will not contain entries for any tasks with pids beyond the earlier
value of pid_max.
Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
[ Fixed comment coding style ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b81b3e959a upstream.
The tgid_map array records a mapping from pid to tgid, where the index
of an entry within the array is the pid & the value stored at that index
is the tgid.
The saved_tgids_next() function iterates over pointers into the tgid_map
array & dereferences the pointers which results in the tgid, but then it
passes that dereferenced value to trace_find_tgid() which treats it as a
pid & does a further lookup within the tgid_map array. It seems likely
that the intent here was to skip over entries in tgid_map for which the
recorded tgid is zero, but instead we end up skipping over entries for
which the thread group leader hasn't yet had its own tgid recorded in
tgid_map.
A minimal fix would be to remove the call to trace_find_tgid, turning:
if (trace_find_tgid(*ptr))
into:
if (*ptr)
..but it seems like this logic can be much simpler if we simply let
seq_read() iterate over the whole tgid_map array & filter out empty
entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that
approach, removing the incorrect logic here entirely.
Link: https://lkml.kernel.org/r/20210630003406.4013668-1-paulburton@google.com
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11c7aa0dde upstream.
Commit 545fbd0775 ("rq-qos: fix missed wake-ups in rq_qos_throttle")
tried to fix a problem that a process could be sleeping in rq_qos_wait()
without anyone to wake it up. However the fix is not complete and the
following can still happen:
CPU1 (waiter1) CPU2 (waiter2) CPU3 (waker)
rq_qos_wait() rq_qos_wait()
acquire_inflight_cb() -> fails
acquire_inflight_cb() -> fails
completes IOs, inflight
decreased
prepare_to_wait_exclusive()
prepare_to_wait_exclusive()
has_sleeper = !wq_has_single_sleeper() -> true as there are two sleepers
has_sleeper = !wq_has_single_sleeper() -> true
io_schedule() io_schedule()
Deadlock as now there's nobody to wakeup the two waiters. The logic
automatically blocking when there are already sleepers is really subtle
and the only way to make it work reliably is that we check whether there
are some waiters in the queue when adding ourselves there. That way, we
are guaranteed that at least the first process to enter the wait queue
will recheck the waiting condition before going to sleep and thus
guarantee forward progress.
Fixes: 545fbd0775 ("rq-qos: fix missed wake-ups in rq_qos_throttle")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210607112613.25344-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56a1188159 upstream.
The commit 529a1101212a("mfd: syscon: Don't free allocated name
for regmap_config") doesn't free the allocated name field of struct
regmap_config, but introduce a memory leak. There is another
commit 94cc89eb8fa5("regmap: debugfs: Fix handling of name string
for debugfs init delays") fixing this debugfs init issue from root
cause. With this fixing, the name field in struct regmap_debugfs_node
is removed. When initialize debugfs for syscon driver, the name
field of struct regmap_config is not used anymore. So, the allocated
name field of struct regmap_config is need to be freed directly after
regmap initialization to avoid memory leak.
Cc: stable@vger.kernel.org
Fixes: 529a1101212a("mfd: syscon: Don't free allocated name for regmap_config")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1c74a6c07 upstream.
Trying to get the AB8500 charging driver working I ran into a bit
of bitrot: we haven't used the driver for a while so errors in
refactorings won't be noticed.
This one is pretty self evident: use argument to the macro or we
end up with a random pointer to something else.
Cc: stable@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marcus Cooper <codekipper@gmail.com>
Fixes: 297d716f62 ("power_supply: Change ownership from driver to core")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2253042d86 upstream.
When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.
For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.
The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fca41af18e upstream.
fw_cfg_showrev() is called by an indirect call in kobj_attr_show(),
which violates clang's CFI checking because fw_cfg_showrev()'s second
parameter is 'struct attribute', whereas the ->show() member of 'struct
kobj_structure' expects the second parameter to be of type 'struct
kobj_attribute'.
$ cat /sys/firmware/qemu_fw_cfg/rev
3
$ dmesg | grep "CFI failure"
[ 26.016832] CFI failure (target: fw_cfg_showrev+0x0/0x8):
Fix this by converting fw_cfg_rev_attr to 'struct kobj_attribute' where
this would have been caught automatically by the incompatible pointer
types compiler warning. Update fw_cfg_showrev() accordingly.
Fixes: 75f3e8e47f ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Link: https://github.com/ClangBuiltLinux/linux/issues/1299
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210211194258.4137998-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f9482aa8d upstream.
We can deadlock when rmmod'ing the driver or going through firmware
reset, because the cfg80211_unregister_wdev() has to bring down the link
for us, ... which then grab the same wiphy lock.
nl80211_del_interface() already handles a very similar case, with a nice
description:
/*
* We hold RTNL, so this is safe, without RTNL opencount cannot
* reach 0, and thus the rdev cannot be deleted.
*
* We need to do it for the dev_close(), since that will call
* the netdev notifiers, and we need to acquire the mutex there
* but don't know if we get there from here or from some other
* place (e.g. "ip link set ... down").
*/
mutex_unlock(&rdev->wiphy.mtx);
...
Do similarly for mwifiex teardown, by ensuring we bring the link down
first.
Sample deadlock trace:
[ 247.103516] INFO: task rmmod:2119 blocked for more than 123 seconds.
[ 247.110630] Not tainted 5.12.4 #5
[ 247.115796] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 247.124557] task:rmmod state:D stack: 0 pid: 2119 ppid: 2114 flags:0x00400208
[ 247.133905] Call trace:
[ 247.136644] __switch_to+0x130/0x170
[ 247.140643] __schedule+0x714/0xa0c
[ 247.144548] schedule_preempt_disabled+0x88/0xf4
[ 247.149714] __mutex_lock_common+0x43c/0x750
[ 247.154496] mutex_lock_nested+0x5c/0x68
[ 247.158884] cfg80211_netdev_notifier_call+0x280/0x4e0 [cfg80211]
[ 247.165769] raw_notifier_call_chain+0x4c/0x78
[ 247.170742] call_netdevice_notifiers_info+0x68/0xa4
[ 247.176305] __dev_close_many+0x7c/0x138
[ 247.180693] dev_close_many+0x7c/0x10c
[ 247.184893] unregister_netdevice_many+0xfc/0x654
[ 247.190158] unregister_netdevice_queue+0xb4/0xe0
[ 247.195424] _cfg80211_unregister_wdev+0xa4/0x204 [cfg80211]
[ 247.201816] cfg80211_unregister_wdev+0x20/0x2c [cfg80211]
[ 247.208016] mwifiex_del_virtual_intf+0xc8/0x188 [mwifiex]
[ 247.214174] mwifiex_uninit_sw+0x158/0x1b0 [mwifiex]
[ 247.219747] mwifiex_remove_card+0x38/0xa0 [mwifiex]
[ 247.225316] mwifiex_pcie_remove+0xd0/0xe0 [mwifiex_pcie]
[ 247.231451] pci_device_remove+0x50/0xe0
[ 247.235849] device_release_driver_internal+0x110/0x1b0
[ 247.241701] driver_detach+0x5c/0x9c
[ 247.245704] bus_remove_driver+0x84/0xb8
[ 247.250095] driver_unregister+0x3c/0x60
[ 247.254486] pci_unregister_driver+0x2c/0x90
[ 247.259267] cleanup_module+0x18/0xcdc [mwifiex_pcie]
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-wireless/98392296-40ee-6300-369c-32e16cff3725@gmail.com/
Link: https://lore.kernel.org/linux-wireless/ab4d00ce52f32bd8e45ad0448a44737e@bewaar.me/
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Reported-by: dave@bewaar.me
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Dave Olsthoorn <dave@bewaar.me>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515024227.2159311-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6eb84fa59 upstream.
The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise
Tegra UCMs don't match by the path/name.
All Tegra machine drivers are specifying the card's name, but it has no
effect if model name is specified in the device-tree since it overrides
the card's name. We need to set the driver_name to "tegra" in order to
get a usable lookup path for the updated ALSA UCMs. The new UCM lookup
path has a form of driver_name/card_name.
The old lookup paths that are based on driver module name continue to
work as before. Note that UCM matching never worked for Tegra ASoC drivers
if they were compiled as built-in, this is fixed by supporting the new
naming scheme.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210529154649.25936-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b33dfe0ba upstream.
Bad counter reads are experienced sometimes when bit 10 or greater rolls
over. Originally, testing showed that at least 10 lower bits would be
set to the same value during these bad reads. However, some users still
reported time skips.
Wider testing revealed that on some chips, occasionally only the lowest
9 bits would read as the anomalous value. During these reads (which
still happen only when bit 10), bit 9 would read as the correct value.
Reduce the mask by one bit to cover these cases as well.
Cc: stable@vger.kernel.org
Fixes: c950ca8c35 ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b22afcdf04 upstream.
Alexey and Joshua tried to solve a cpusets related hotplug problem which is
user space visible and results in unexpected behaviour for some time after
a CPU has been plugged in and the corresponding uevent was delivered.
cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a
workqueue. This is done because the cpusets code has already a lock
nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or
waiting for the work to finish with cpu_hotplug_lock held can and will
deadlock because that results in the reverse lock order.
As a consequence the uevent can be delivered before cpusets have consistent
state which means that a user space invocation of sched_setaffinity() to
move a task to the plugged CPU fails up to the point where the scheduled
work has been processed.
The same is true for CPU unplug, but that does not create user observable
failure (yet).
It's still inconsistent to claim that an operation is finished before it
actually is and that's the real issue at hand. uevents just make it
reliably observable.
Obviously the problem should be fixed in cpusets/cgroups, but untangling
that is pretty much impossible because according to the changelog of the
commit which introduced this 8 years ago:
3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")
the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and
the whole code is built around that.
So bite the bullet and invoke the relevant cpuset function, which waits for
the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and
only when tasks are not frozen by suspend/hibernate because that would
obviously wait forever.
Waiting there with cpu_add_remove_lock, which is protecting the present
and possible CPU maps, held is not a problem at all because neither work
queues nor cpusets/cgroups have any lockchains related to that lock.
Waiting in the hotplug machinery is not problematic either because there
are already state callbacks which wait for hardware queues to drain. It
makes the operations slightly slower, but hotplug is slow anyway.
This ensures that state is consistent before returning from a hotplug
up/down operation. It's still inconsistent during the operation, but that's
a different story.
Add a large comment which explains why this is done and why this is not a
dump ground for the hack of the day to work around half thought out locking
schemes. Document also the implications vs. hotplug operations and
serialization or the lack of it.
Thanks to Alexy and Joshua for analyzing why this temporary
sched_setaffinity() failure happened.
Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")
Reported-by: Alexey Klimov <aklimov@redhat.com>
Reported-by: Joshua Baker <jobaker@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <aklimov@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52218fcd61 upstream.
The TTL field indicates the level of page table walk holding the *leaf*
entry for the address being invalidated. But currently, the TTL field
may be set to an incorrent value in the following stack:
pte_free_tlb
__pte_free_tlb
tlb_remove_table
tlb_table_invalidate
tlb_flush_mmu_tlbonly
tlb_flush
In this case, we just want to flush a PTE page, but the tlb->cleared_pmds
is set and we get tlb_level = 2 in the tlb_get_level() function. This may
cause some unexpected problems.
This patch set the TTL field to 0 if tlb->freed_tables is set. The
tlb->freed_tables indicates page table pages are freed, not the leaf
entry.
Cc: <stable@vger.kernel.org> # 5.9.x
Fixes: c4ab2cbc1d ("arm64: tlb: Set the TTL field in flush_tlb_range")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: ZhuRui <zhurui3@huawei.com>
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Link: https://lore.kernel.org/r/b80ead47-1f88-3a00-18e1-cacc22f54cc4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09247e110b upstream.
While initializing an UHS-I SD card, the mmc core first tries to switch to
1.8V I/O voltage, before it continues to change the settings for the bus
speed mode.
However, the current behaviour in the mmc core is inconsistent and doesn't
conform to the SD spec. More precisely, an SD card that supports UHS-I must
set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register
response. When switching to 1.8V I/O the mmc core correctly checks both of
the bits, but only the SD_OCR_S18R bit when changing the settings for bus
speed mode.
Rather than actually fixing the code to confirm to the SD spec, let's
deliberately deviate from it by requiring only the SD_OCR_S18R bit for both
parts. This enables us to support UHS-I for SDSC cards (outside spec),
which is actually being supported by some existing SDSC cards. Moreover,
this fixes the inconsistent behaviour.
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Link: https://lore.kernel.org/r/CWXP265MB26803AE79E0AD5ED083BF2A6C4529@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
[Ulf: Rewrote commit message and comments to clarify the changes]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0244847f9 upstream.
When an eMMC device is being run in HS400 mode, any access to the
RPMB device will cause the error message "mmc1: Invalid UHS-I mode
selected". This happens as a result of tuning being disabled before
RPMB access and then re-enabled after the RPMB access is complete.
When tuning is re-enabled, the system has to switch from HS400
to HS200 to do the tuning and then back to HS400. As part of
sequence to switch from HS400 to HS200 the system is temporarily
put into HS mode. When switching to HS mode, sdhci_get_preset_value()
is called and does not have support for HS mode and prints the warning
message and returns the preset for SDR12. The fix is to add support
for MMC and SD HS modes to sdhci_get_preset_value().
This can be reproduced on any system running eMMC in HS400 mode
(not HS400ES) by using the "mmc" utility to run the following
command: "mmc rpmb read-counter /dev/mmcblk0rpmb".
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 52983382c7 ("mmc: sdhci: enhance preset value function")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a5074303 upstream.
The vc4_set_crtc_possible_masks is meant to run over all the encoders
and then set their possible_crtcs mask to their associated pixelvalve.
However, since the commit 39fcb28083 ("drm/vc4: txp: Turn the TXP into
a CRTC of its own"), the TXP has been turned to a CRTC and encoder of
its own, and while it does indeed register an encoder, it no longer has
an associated pixelvalve. The code will thus run over the TXP encoder
and set a bogus possible_crtcs mask, overriding the one set in the TXP
bind function.
In order to fix this, let's skip any virtual encoder.
Cc: <stable@vger.kernel.org> # v5.9+
Fixes: 39fcb28083 ("drm/vc4: txp: Turn the TXP into a CRTC of its own")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-3-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1bfd74bfe upstream.
On the Loongson64 platform used with Radeon GPU, shutdown or reboot failed
when console=tty is in the boot cmdline.
radeon_suspend_kms() puts the hw in the suspend state, especially set fb
state as FBINFO_STATE_SUSPENDED:
if (fbcon) {
console_lock();
radeon_fbdev_set_suspend(rdev, 1);
console_unlock();
}
Then avoid to do any more fb operations in the related functions:
if (p->state != FBINFO_STATE_RUNNING)
return;
So call radeon_suspend_kms() in radeon_pci_shutdown() for Loongson64 to fix
this issue, it looks like some kind of workaround like powerpc.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adcf949e66 upstream.
SMU had set all the necessary fields for a link width switch
but the width switch wasn't occurring because the link was idle
in the L1 state. Setting LC_L1_RECONFIG_EN=0x1 will allow width
switches to also be initiated while in L1 instead of waiting until
the link is back in L0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa61581126 upstream.
Navi series GPUs have 2 SIMDs per CU (and then 2 CUs per WGP).
The NV enum headers incorrectly listed this as 4, which later meant
we were incorrectly reporting the number of SIMDs in the HSA
topology. This could cause problems down the line for user-space
applications that want to launch a fixed amount of work to each
SIMD.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91cdbb955a upstream.
The kernel handles the NX fault by updating CSB or sending
signal to process. In multithread applications, children can
open VAS windows and can exit without closing them. But the
parent can continue to send NX requests with these windows. To
prevent pid reuse, reference will be taken on pid and tgid
when the window is opened and release them during window close.
The current code is not releasing the tgid reference which can
cause pid leak and this patch fixes the issue.
Fixes: db1c08a740 ("powerpc/vas: Take reference to PID and mm for user space windows")
Cc: stable@vger.kernel.org # 5.8+
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6020fc4d444864fe20f7dcdc5edfe53e67480a1c.camel@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 015d98149b upstream.
A change in clang 13 results in the __lwsync macro being defined as
__builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what
the target supports. This breaks the build because of -Werror in
arch/powerpc, along with thousands of warnings:
In file included from arch/powerpc/kernel/pmc.c:12:
In file included from include/linux/bug.h:5:
In file included from arch/powerpc/include/asm/bug.h:109:
In file included from include/asm-generic/bug.h:20:
In file included from include/linux/kernel.h:12:
In file included from include/linux/bitops.h:32:
In file included from arch/powerpc/include/asm/bitops.h:62:
arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]
#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
^
<built-in>:308:9: note: previous definition is here
#define __lwsync __builtin_ppc_lwsync
^
1 error generated.
Undefine this macro so that the runtime patching introduced by
commit 2d1b202762 ("powerpc: Fixup lwsync at runtime") continues to
work properly with clang and the build no longer breaks.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1386
Link: 62b5df7fe2
Link: https://lore.kernel.org/r/20210528182752.1852002-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd5d5e602f upstream.
The powerpc kernel is not prepared to handle exec faults from kernel.
Especially, the function is_exec_fault() will return 'false' when an
exec fault is taken by kernel, because the check is based on reading
current->thread.regs->trap which contains the trap from user.
For instance, when provoking a LKDTM EXEC_USERSPACE test,
current->thread.regs->trap is set to SYSCALL trap (0xc00), and
the fault taken by the kernel is not seen as an exec fault by
set_access_flags_filter().
Commit d7df2443cd ("powerpc/mm: Fix spurious segfaults on radix
with autonuma") made it clear and handled it properly. But later on
commit d3ca587404 ("powerpc/mm: Fix reporting of kernel execute
faults") removed that handling, introducing test based on error_code.
And here is the problem, because on the 603 all upper bits of SRR1
get cleared when the TLB instruction miss handler bails out to ISI.
Until commit cbd7e6ca02 ("powerpc/fault: Avoid heavy
search_exception_tables() verification"), an exec fault from kernel
at a userspace address was indirectly caught by the lack of entry for
that address in the exception tables. But after that commit the
kernel mainly relies on KUAP or on core mm handling to catch wrong
user accesses. Here the access is not wrong, so mm handles it.
It is a minor fault because PAGE_EXEC is not set,
set_access_flags_filter() should set PAGE_EXEC and voila.
But as is_exec_fault() returns false as explained in the beginning,
set_access_flags_filter() bails out without setting PAGE_EXEC flag,
which leads to a forever minor exec fault.
As the kernel is not prepared to handle such exec faults, the thing to
do is to fire in bad_kernel_fault() for any exec fault taken by the
kernel, as it was prior to commit d3ca587404.
Fixes: d3ca587404 ("powerpc/mm: Fix reporting of kernel execute faults")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/024bb05105050f704743a0083fe3548702be5706.1625138205.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97113eb39f upstream.
To avoid a race between rmap walk and mremap, mremap does
take_rmap_locks(). The lock was taken to ensure that rmap walk don't miss
a page table entry due to PTE moves via move_pagetables(). The kernel
does further optimization of this lock such that if we are going to find
the newly added vma after the old vma, the rmap lock is not taken. This
is because rmap walk would find the vmas in the same order and if we don't
find the page table attached to older vma we would find it with the new
vma which we would iterate later.
As explained in commit eb66ae0308 ("mremap: properly flush TLB before
releasing the page") mremap is special in that it doesn't take ownership
of the page. The optimized version for PUD/PMD aligned mremap also
doesn't hold the ptl lock. This can result in stale TLB entries as show
below.
This patch updates the rmap locking requirement in mremap to handle the race condition
explained below with optimized mremap::
Optmized PMD move
CPU 1 CPU 2 CPU 3
mremap(old_addr, new_addr) page_shrinker/try_to_unmap_one
mmap_write_lock_killable()
addr = old_addr
lock(pte_ptl)
lock(pmd_ptl)
pmd = *old_pmd
pmd_clear(old_pmd)
flush_tlb_range(old_addr)
*new_pmd = pmd
*new_addr = 10; and fills
TLB with new addr
and old pfn
unlock(pmd_ptl)
ptep_clear_flush()
old pfn is free.
Stale TLB entry
Optimized PUD move also suffers from a similar race. Both the above race
condition can be fixed if we force mremap path to take rmap lock.
Link: https://lkml.kernel.org/r/20210616045239.370802-7-aneesh.kumar@linux.ibm.com
Fixes: 2c91bd4a4e ("mm: speed up mremap by 20x on large regions")
Fixes: c49dd34018 ("mm: speedup mremap on 1GB or larger regions")
Link: https://lore.kernel.org/linux-mm/CAHk-=wgXVR04eBNtxQfevontWnP6FDm+oj5vauQXP3S-huwbPw@mail.gmail.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cad065ed8d upstream.
MIPS MT extensions were added with the MIPS 34K processor, which was
based on the MIPS32r2 ISA.
This fixes a build error when building a generic kernel for a MIPS32r1
CPU.
Fixes: c434b9f80b ("MIPS: Kconfig: add MIPS_GENERIC_KERNEL symbol")
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6817c94443 ]
The cause of the problem is as follows:
1. when cat /sys/devices/system/memory/memory0/valid_zones,
test_pages_in_a_zone() will be called.
2. test_pages_in_a_zone() finds the zone according to stat_pfn = 0.
The smallest pfn of the numa node in the mips architecture is 128,
and the page corresponding to the previous 0~127 pfn is not
initialized (page->flags is 0xFFFFFFFF)
3. The nid and zonenum obtained using page_zone(pfn_to_page(0)) are out
of bounds in the corresponding array,
&NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)],
access to the out-of-bounds zone member variables appear abnormal,
resulting in Oops.
Therefore, it is necessary to keep the page between 0 and the minimum
pfn to prevent Oops from appearing.
Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50619dbf8d ]
The first chunk in a packet is ensured to be present at the beginning of
sctp_rcv(), as a packet needs to have at least 1 chunk. But the second
one, may not be completely available and ch->length can be over
uninitialized memory.
Fix here is by only trying to walk on the next chunk if there is enough to
hold at least the header, and then proceed with the ch->length validation
that is already there.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c5dc070ff ]
Ilja reported that, simply putting it, nothing was validating that
from_addr_param functions were operating on initialized memory. That is,
the parameter itself was being validated by sctp_walk_params, but it
doesn't check for types and their specific sizes and it could be a 0-length
one, causing from_addr_param to potentially work over the next parameter or
even uninitialized memory.
The fix here is to, in all calls to from_addr_param, check if enough space
is there for the wanted IP address type.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccff81e1d0 ]
kmemleak scans struct page, but it does not scan the page content. If we
allocate some memory with kmalloc(), then allocate page with alloc_page(),
and if we put kmalloc pointer somewhere inside that page, kmemleak will
report kmalloc pointer as a false positive.
We can instruct kmemleak to scan the memory area by calling kmemleak_alloc()
and kmemleak_free(), but part of struct bpf_ringbuf is mmaped to user space,
and if struct bpf_ringbuf changes we would have to revisit and review size
argument in kmemleak_alloc(), because we do not want kmemleak to scan the
user space memory. Let's simplify things and use kmemleak_not_leak() here.
For posterity, also adding additional prior analysis from Andrii:
I think either kmemleak or syzbot are misreporting this. I've added a
bunch of printks around all allocations performed by BPF ringbuf. [...]
On repro side I get these two warnings:
[vmuser@archvm bpf]$ sudo ./repro
BUG: memory leak
unreferenced object 0xffff88810d538c00 (size 64):
comm "repro", pid 2140, jiffies 4294692933 (age 14.540s)
hex dump (first 32 bytes):
00 af 19 04 00 ea ff ff c0 ae 19 04 00 ea ff ff ................
80 ae 19 04 00 ea ff ff c0 29 2e 04 00 ea ff ff .........)......
backtrace:
[<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
[<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
[<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
[<00000000f601d565>] do_syscall_64+0x2d/0x40
[<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff88810d538c80 (size 64):
comm "repro", pid 2143, jiffies 4294699025 (age 8.448s)
hex dump (first 32 bytes):
80 aa 19 04 00 ea ff ff 00 ab 19 04 00 ea ff ff ................
c0 ab 19 04 00 ea ff ff 80 44 28 04 00 ea ff ff .........D(.....
backtrace:
[<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
[<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
[<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
[<00000000f601d565>] do_syscall_64+0x2d/0x40
[<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Note that both reported leaks (ffff88810d538c80 and ffff88810d538c00)
correspond to pages array bpf_ringbuf is allocating and tracking properly
internally. Note also that syzbot repro doesn't close FD of created BPF
ringbufs, and even when ./repro itself exits with error, there are still
two forked processes hanging around in my system. So clearly ringbuf maps
are alive at that point. So reporting any memory leak looks weird at that
point, because that memory is being used by active referenced BPF ringbuf.
It's also a question why repro doesn't clean up its forks. But if I do a
`pkill repro`, I do see that all the allocated memory is /properly/ cleaned
up [and the] "leaks" are deallocated properly.
BTW, if I add close() right after bpf() syscall in syzbot repro, I see that
everything is immediately deallocated, like designed. And no memory leak
is reported. So I don't think the problem is anywhere in bpf_ringbuf code,
rather in the leak detection and/or repro itself.
Reported-by: syzbot+5d895828587f49e7fe9b@syzkaller.appspotmail.com
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
[ Daniel: also included analysis from Andrii to the commit log ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+5d895828587f49e7fe9b@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzYk+dqs+jwu6VKXP-RttcTEGFe+ySTGWT9CRNkagDiJVA@mail.gmail.com
Link: https://lore.kernel.org/lkml/YNTAqiE7CWJhOK2M@nuc10
Link: https://lore.kernel.org/lkml/20210615101515.GC26027@arm.com
Link: https://syzkaller.appspot.com/bug?extid=5d895828587f49e7fe9b
Link: https://lore.kernel.org/bpf/20210626181156.1873604-1-rkovhaev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c35b07e6d ]
The _sum and _avg values are in general sync together with the PELT
divider. They are however not always completely in perfect sync,
resulting in situations where _sum gets to zero while _avg stays
positive. Such situations are undesirable.
This comes from the fact that PELT will increase period_contrib, also
increasing the PELT divider, without updating _sum and _avg values to
stay in perfect sync where (_sum == _avg * divider). However, such PELT
change will never lower _sum, making it impossible to end up in a
situation where _sum is zero and _avg is not.
Therefore, we need to ensure that when subtracting load outside PELT,
that when _sum is zero, _avg is also set to zero. This occurs when
(_sum < _avg * divider), and the subtracted (_avg * divider) is bigger
or equal to the current _sum, while the subtracted _avg is smaller than
the current _avg.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210624111815.57937-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f00bfb372 ]
This is btsoc timing issue, after host start to downloading bt firmware,
ep2 need time to switch from function acl to function dfu, so host add
20ms delay as workaround.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02ce2c2c24 ]
When the Get Device Flags command fails, it returns the error status
with the parameters filled with the garbage values. Although the
parameters are not used, it is better to fill with zero than the random
values.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e848dbd364 ]
Because mSBC frames do not need to be aligned to the SCO packet
boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC
data satisfy 60 Bytes avoid payload unaligned situation and fixed
some headset no voise issue.
USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ef36a52b0 ]
0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cfdf8fcaa ]
When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.
Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.
Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d123b81ac ]
Dave observed number of machines hitting OOM on the UDP send
path. The workload seems to be sending large UDP packets over
loopback. Since loopback has MTU of 64k kernel will try to
allocate an skb with up to 64k of head space. This has a good
chance of failing under memory pressure. What's worse if
the message length is <32k the allocation may trigger an
OOM killer.
This is entirely avoidable, we can use an skb with page frags.
af_unix solves a similar problem by limiting the head
length to SKB_MAX_ALLOC. This seems like a good and simple
approach. It means that UDP messages > 16kB will now
use fragments if underlying device supports SG, if extra
allocator pressure causes regressions in real workloads
we can switch to trying the large allocation first and
falling back.
v4: pre-calculate all the additions to alloclen so
we can be sure it won't go over order-2
Reported-by: Dave Jones <dsj@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8b9eab992 ]
It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.
Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.
Thus, this is following up on Eric's commit 3d368ab87c ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE. This is also in line in how we retrieve socket cookie
via SO_COOKIE.
[1] https://kind.sigs.k8s.io/
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 647d446d66 ]
The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to
see how many entries user space provided and return ENOSPC if there are
more programs than that. Before this patch, this is not checked and
ENOSPC is never returned.
Note that one lirc device is limited to 64 bpf programs, and user space
I'm aware of -- ir-keytable -- always gives enough space for 64 entries
already. However, we should not copy program ids than are requested.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623213754.632-1-sean@mess.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45daaa1318 ]
The following race was possible:
1. The device driver requests HW restart.
2. A scan is requested from user space and is propagated
to the driver. During this flow HW_SCANNING flag is set.
3. The thread that handles the HW restart is scheduled,
and before starting the actual reconfiguration it
checks that HW_SCANNING is not set. The flow does so
without acquiring any lock, and thus the WARN fires.
Fix this by checking that HW_SCANNING is on only after RTNL is
acquired, i.e., user space scan request handling is no longer
in transit.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.8238ab3e19ab.I2693c581c70251472b4f9089e37e06fb2c18268f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d656a4c6ea ]
If we have been keeping per-CPU statistics, consider them
regardless of USES_RSS, because we may not actually fill
those, for example in non-fast-RX cases when the connection
is not compatible with fast-RX. If we didn't fill them, the
additional data will be zero and not affect anything, and
if we did fill them then it's more correct to consider them.
This fixes an issue in mesh mode where some statistics are
not updated due to USES_RSS being set, but fast-RX isn't
used.
Reported-by: Thiraviyam Mariyappan <tmariyap@codeaurora.org>
Link: https://lore.kernel.org/r/20210610220814.13b35f5797c5.I511e9b33c5694e0d6cef4b6ae755c873d7c22124@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e93bdd7840 ]
Fix the following out-of-bounds warning:
net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ebe4feb8b ]
If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.
Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.
In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45423cff1d ]
If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.
Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.
2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove
Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.
Example of a log with the error:
list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:47!
[...trimmed...]
RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
[...trimmed...]
Call Trace:
efx_dissociate+0x1f/0x140 [sfc]
efx_pci_remove+0x27/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
pci_stop_bus_device+0x69/0x90
pci_stop_and_remove_bus_device+0xe/0x20
pci_iov_remove_virtfn+0xba/0x120
sriov_disable+0x2f/0xe0
efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
? pcie_aer_is_native+0x12/0x40
efx_ef10_sriov_fini+0x72/0x110 [sfc]
efx_pci_remove+0x62/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
unbind_store+0xf6/0x130
kernfs_fop_write+0x116/0x190
vfs_write+0xa5/0x1a0
ksys_write+0x4f/0xb0
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 956c6d4f20 ]
8821CE with ASPM cannot work properly on Protempo Ltd L116HTN6SPW. Add a
quirk to disable the cap.
The reporter describes the symptom is that this module (driver) causes
frequent freezes, randomly but usually within a few minutes of running
(thus very soon after boot): screen display remains frozen, no response
to either keyboard or mouse input. All I can do is to hold the power
button to power off, then reboot.
Reported-by: Paul Szabo <psz2036@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210607012254.6306-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8835a64f74 ]
When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.
This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.
Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20ec0a6d60 ]
rxe_mr_init_user() always returns the fixed -EINVAL when ib_umem_get()
fails so it's hard for user to know which actual error happens in
ib_umem_get(). For example, ib_umem_get() will return -EOPNOTSUPP when
trying to pin pages on a DAX file.
Return actual error as mlx4/mlx5 does.
Link: https://lore.kernel.org/r/20210621071456.4259-1-ice_yangxiao@163.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7ff9cff70 ]
The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.
However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.
client server
1. sk_state=TCP_SYN_SENT |
2. call ->connect() |
3. wait reply |
| 4. sk_state=TCP_ESTABLISHED
| 5. insert to connected list
| 6. reply to the client
7. sk_state=TCP_ESTABLISHED |
8. insert to connected list |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE |
client is exiting... |
11. call ->release() |
virtio_transport_close
if (!(sk->sk_state == TCP_ESTABLISHED ||
sk->sk_state == TCP_CLOSING))
return true; *return at here, the server cannot notice the connection is corrupt*
So the client should notify the peer in this case.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418
Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52c4a1a85f ]
As we know that AVB is enabled by default, and the ENET IP design is
queue 0 for best effort, queue 1&2 for AVB Class A&B. Bandwidth of each
queue 1&2 set in driver is 50%, TX bandwidth fluctuated when selecting
tx queues randomly with FEC_QUIRK_HAS_AVB quirk available.
This patch adds ndo_select_queue callback to select queues for
transmitting to fix this issue. It will always return queue 0 if this is
not a vlan packet, and return queue 1 or 2 based on priority of vlan
packet.
You may complain that in fact we only use single queue for trasmitting
if we are not targeted to VLAN. Yes, but seems we have no choice, since
AVB is enabled when the driver probed, we can't switch this feature
dynamicly. After compare multiple queues to single queue, TX throughput
almost no improvement.
One way we can implemet is to configure the driver to multiple queues
with Round-robin scheme by default. Then add ndo_setup_tc callback to
enable/disable AVB feature for users. Unfortunately, ENET AVB IP seems
not follow the standard 802.1Qav spec. We only can program
DMAnCFG[IDLE_SLOPE] field to calculate bandwidth fraction. And idle
slope is restricted to certain valus (a total of 19). It's far away from
CBS QDisc implemented in Linux TC framework. If you strongly suggest to do
this, I think we only can support limited numbers of bandwidth and reject
others, but it's really urgly and wried.
With this patch, VLAN tagged packets route to queue 0/1/2 based on vlan
priority; VLAN untagged packets route to queue 0.
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 471ff4455d ]
Frieder Schrempf reported a TX throuthput issue [1], it happens quite often
that the measured bandwidth in TX direction drops from its expected/nominal
value to something like ~50% (for 100M) or ~67% (for 1G) connections.
[1] https://lore.kernel.org/linux-arm-kernel/421cc86c-b66f-b372-32f7-21e59f9a98bc@kontron.de/
The issue becomes clear after digging into it, Net core would select
queues when transmitting packets. Since FEC have not impletemented
ndo_select_queue callback yet, so it will call netdev_pick_tx to select
queues randomly.
For i.MX6SX ENET IP with AVB support, driver default enables this
feature. According to the setting of QOS/RCMRn/DMAnCFG registers, AVB
configured to Credit-based scheme, 50% bandwidth of each queue 1&2.
With below tests let me think more:
1) With FEC_QUIRK_HAS_AVB quirk, can reproduce TX bandwidth fluctuations issue.
2) Without FEC_QUIRK_HAS_AVB quirk, can't reproduce TX bandwidth fluctuations issue.
The related difference with or w/o FEC_QUIRK_HAS_AVB quirk is that, whether we
program FTYPE field of TxBD or not. As I describe above, AVB feature is
enabled by default. With FEC_QUIRK_HAS_AVB quirk, frames in queue 0
marked as non-AVB, and frames in queue 1&2 marked as AVB Class A&B. It's
unreasonable if frames in queue 1&2 are not required to be time-sensitive.
So when Net core select tx queues ramdomly, Credit-based scheme would work
and lead to TX bandwidth fluctuated. On the other hand, w/o
FEC_QUIRK_HAS_AVB quirk, frames in queue 1&2 are all marked as non-AVB, so
Credit-based scheme would not work.
Till now, how can we fix this TX throughput issue? Yes, please remove
FEC_QUIRK_HAS_AVB quirk if you suffer it from time-nonsensitive networking.
However, this quirk is used to indicate i.MX6SX, other setting depends
on it. So this patch adds a new quirk FEC_QUIRK_HAS_MULTI_QUEUES to
represent i.MX6SX, it is safe for us remove FEC_QUIRK_HAS_AVB quirk
now.
FEC_QUIRK_HAS_AVB quirk is set by default in the driver, and users may
not know much about driver details, they would waste effort to find the
root cause, that is not we want. The following patch is a implementation
to fix it and users don't need to modify the driver.
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed914d48b6 ]
This fixes Page Table accounting bug.
MIPS is the ONLY arch just defining __HAVE_ARCH_PMD_ALLOC_ONE alone.
Since commit b2b29d6d01 (mm: account PMD tables like PTE tables),
"pmd_free" in asm-generic with PMD table accounting and "pmd_alloc_one"
in MIPS without PMD table accounting causes PageTable accounting number
negative, which read by global_zone_page_state(), always returns 0.
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c240b044ed ]
Based on 2001:3319 and 2357:0109 which I used to test the fix and
0bda:818b and 2357:0108 for which I found efuse dumps online.
== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.
== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.
Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c368362c36 ]
The iv from RXD is only for TKIP_RSC/CCMP_PN/GCMP_PN, and it needs a
check for CCMP header insertion. Move mt76_cipher_type to mt76.h to
reduce duplicated code.
Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abded041a0 ]
Maximum interval (in seconds) for schedule scan plan supported by
the offload firmware can be U16_MAX.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01f7da4091 ]
This patch fixes a mcu hang during device probe on
Marvell ESPRESSObin after a hot reboot.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b244163f2c ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. of_node_put() on it before exiting
this function.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d8ea148e5 ]
Th_strings arrays netdev_features_strings, tunable_strings, and
phy_tunable_strings has been moved to file net/ethtool/common.c.
So fixes the comment.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94e4f57946 ]
Fixes AQL issues on full queues, especially with 802.3 encap offload
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec8f1a90d0 ]
Rely on the txs fixed-rate bit instead of info->control.rates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c526d440f ]
The entry for PTYPE 2 in the ice_ptype_lkup table incorrectly states
that this is an L2 packet with no payload. According to the datasheet,
this PTYPE is actually unused and reserved.
Fix the lookup entry to indicate this is an unused entry that is
reserved.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 638a0c8c88 ]
The entry for PTYPE 90 indicates that the payload is layer 3. This does
not match the specification in the datasheet which indicates the packet
is a MAC, IPv6, UDP packet, with a payload in layer 4.
Fix the lookup table to match the data sheet.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28131e9d93 ]
syzbot reported a shift-out-of-bounds that KUBSAN observed in the
interpreter:
[...]
UBSAN: shift-out-of-bounds in kernel/bpf/core.c:1420:2
shift exponent 255 is too large for 64-bit type 'long long unsigned int'
CPU: 1 PID: 11097 Comm: syz-executor.4 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
___bpf_prog_run.cold+0x19/0x56c kernel/bpf/core.c:1420
__bpf_prog_run32+0x8f/0xd0 kernel/bpf/core.c:1735
bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
bpf_prog_run_clear_cb include/linux/filter.h:755 [inline]
run_filter+0x1a1/0x470 net/packet/af_packet.c:2031
packet_rcv+0x313/0x13e0 net/packet/af_packet.c:2104
dev_queue_xmit_nit+0x7c2/0xa90 net/core/dev.c:2387
xmit_one net/core/dev.c:3588 [inline]
dev_hard_start_xmit+0xad/0x920 net/core/dev.c:3609
__dev_queue_xmit+0x2121/0x2e00 net/core/dev.c:4182
__bpf_tx_skb net/core/filter.c:2116 [inline]
__bpf_redirect_no_mac net/core/filter.c:2141 [inline]
__bpf_redirect+0x548/0xc80 net/core/filter.c:2164
____bpf_clone_redirect net/core/filter.c:2448 [inline]
bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2420
___bpf_prog_run+0x34e1/0x77d0 kernel/bpf/core.c:1523
__bpf_prog_run512+0x99/0xe0 kernel/bpf/core.c:1737
bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
bpf_test_run+0x3ed/0xc50 net/bpf/test_run.c:50
bpf_prog_test_run_skb+0xabc/0x1c50 net/bpf/test_run.c:582
bpf_prog_test_run kernel/bpf/syscall.c:3127 [inline]
__do_sys_bpf+0x1ea9/0x4f00 kernel/bpf/syscall.c:4406
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
[...]
Generally speaking, KUBSAN reports from the kernel should be fixed.
However, in case of BPF, this particular report caused concerns since
the large shift is not wrong from BPF point of view, just undefined.
In the verifier, K-based shifts that are >= {64,32} (depending on the
bitwidth of the instruction) are already rejected. The register-based
cases were not given their content might not be known at verification
time. Ideas such as verifier instruction rewrite with an additional
AND instruction for the source register were brought up, but regularly
rejected due to the additional runtime overhead they incur.
As Edward Cree rightly put it:
Shifts by more than insn bitness are legal in the BPF ISA; they are
implementation-defined behaviour [of the underlying architecture],
rather than UB, and have been made legal for performance reasons.
Each of the JIT backends compiles the BPF shift operations to machine
instructions which produce implementation-defined results in such a
case; the resulting contents of the register may be arbitrary but
program behaviour as a whole remains defined.
Guard checks in the fast path (i.e. affecting JITted code) will thus
not be accepted.
The case of division by zero is not truly analogous here, as division
instructions on many of the JIT-targeted architectures will raise a
machine exception / fault on division by zero, whereas (to the best
of my knowledge) none will do so on an out-of-bounds shift.
Given the KUBSAN report only affects the BPF interpreter, but not JITs,
one solution is to add the ANDs with 63 or 31 into ___bpf_prog_run().
That would make the shifts defined, and thus shuts up KUBSAN, and the
compiler would optimize out the AND on any CPU that interprets the shift
amounts modulo the width anyway (e.g., confirmed from disassembly that
on x86-64 and arm64 the generated interpreter code is the same before
and after this fix).
The BPF interpreter is slow path, and most likely compiled out anyway
as distros select BPF_JIT_ALWAYS_ON to avoid speculative execution of
BPF instructions by the interpreter. Given the main argument was to
avoid sacrificing performance, the fact that the AND is optimized away
from compiler for mainstream archs helps as well as a solution moving
forward. Also add a comment on LSH/RSH/ARSH translation for JIT authors
to provide guidance when they see the ___bpf_prog_run() interpreter
code and use it as a model for a new JIT backend.
Reported-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com
Reported-by: Kurt Manucredo <fuzzybritches0@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com
Cc: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/bpf/0000000000008f912605bd30d5d7@google.com
Link: https://lore.kernel.org/bpf/bac16d8d-c174-bdc4-91bd-bfa62b410190@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2ae34a7de ]
Don't check the sequence number when deciding when to update time_in in
the node table if tag removal is offloaded since the sequence number is
part of the tag. This fixes a problem where the times in the node table
wouldn't update when 0 appeared to be before or equal to seq_out when
tag removal was offloaded.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7b2451d31 ]
Calling free_mqd inside of destroy_queue_nocpsch_locked can cause a
circular lock. destroy_queue_nocpsch_locked is called under a DQM lock,
which is taken in MMU notifiers, potentially in FS reclaim context.
Taking another lock, which is BO reservation lock from free_mqd, while
causing an FS reclaim inside the DQM lock creates a problematic circular
lock dependency. Therefore move free_mqd out of
destroy_queue_nocpsch_locked and call it after unlocking DQM.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63f6e01237 ]
get_wave_state acquires the mmap_lock on copy_to_user but so do
mmu_notifiers. mmu_notifiers allows dqm locking so do get_wave_state
outside the dqm_lock to prevent circular locking.
v2: squash in unused variable removal.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b5f0f29b1 ]
The SJA1110 switch integrates TJA1103 PHYs, but in SJA1110 switch rev B
silicon, there is a bug in that the registers for selecting the 100base-T1
autoneg master/slave roles are not writable.
To enable write access to the master/slave registers, these additional
PHY writes are necessary during initialization.
The issue has been corrected in later SJA1110 silicon versions and is
not present in the standalone PHY variants, but applying the workaround
unconditionally in the driver should not do any harm.
Suggested-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11ef6bc846 ]
At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().
After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.
Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.
Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.
Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 991bd8d7bc ]
Some architectures have pages larger than 4k and committing a full
page causes needless overhead.
Fix this by writing a single block when committing the superblock.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fd06963fa ]
When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails,
the error will not be reported because the -ENOMEM assignment
to the err variable is overwritten before. Fix this by moving
these two in front of the function so that memory allocation
failures will be reported.
Reported-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73214a690c ]
Fix the following kernel build warnings:
drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'skb' not described in 'build_hdr_descs_arr'
drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'indir_arr' not described in 'build_hdr_descs_arr'
drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Excess function parameter 'txbuff' description in 'build_hdr_descs_arr'
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03fc4cf45d ]
For each CRTC state, check the size of Gamma and Degamma LUTs so
unexpected and larger sizes wouldn't slip through.
TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes
v2: fix assignments in if clauses, Mark's email.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ee8856de8 ]
It has been reported that on RTL8106e the link-up interrupt may be
significantly delayed if the user enables ASPM L1. Per default ASPM
is disabled. The change leaves L1 enabled on the PCIe link (thus still
allowing to reach higher package power saving states), but the
NIC won't actively trigger it.
Reported-by: Koba Ko <koba.ko@canonical.com>
Tested-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a55a73433 ]
Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f18c11812c ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc05716d4f ]
Fixes handling when page tables are in system memory.
v3: remove struct amdgpu_vm_parser.
v2: remove unwanted variable.
change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db8f7be1e1 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e67dfb8d15 ]
Several tests do not set some ports down as part of their cleanup(),
resulting in IPv6 link-local addresses and associated routes not being
deleted.
These leaks were found using a BPF tool that monitors ASIC resources.
Solve this by setting the ports down at the end of the tests.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6813cc8cfd ]
PHY will delay about 11.5ms to generate RXC clock when switching from
power down to normal operation. Read/write registers would also cause RXC
become unstable and stop for a while during this process. Realtek engineer
suggests 15ms or more delay can workaround this issue.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 665f28507a ]
[Why]
When calculating recout width for an MPO plane on a mode that's using
ODM combine, driver can calculate a negative value, resulting in a
crash.
[How]
For negative widths, use zero such that validation will prune the
configuration correctly and disallow MPO.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8518b60c ]
[why]
When OS overrides training link training parameters
for MST device to SST mode, MST resources are not
released and leak of the resource may result crash and
incorrect MST discovery during following hot plugs.
[how]
Retaining sink object to be reused by SST link and
releasing MST resources.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c521fc316d ]
[Why]
We update scaling settings when scaling mode has been changed.
However when changing mode from native resolution the scaling mode previously
set gets ignored.
[How]
Perform scaling settings update on modeset.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 346cf627fb ]
[why]
DSCCLK validation is not necessary because DSCCLK is derrived from
DISPCLK, therefore if DISPCLK validation passes, DSCCLK is valid, too.
Doing DSCLK validation in addition to DISPCLK leads to modes being
wrongly rejected when DSCCLK was incorrectly set outside of DML.
[how]
Remove DSCCLK validation because it's implicitly validated under DISPCLK
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35cba15a50 ]
Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20f1932e22 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb51a3a38 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85eb138945 ]
We should not directly BUG() when there is hdr error, it is
better to output a print when such error happens. Currently,
the caller of xmit_skb() already did it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb3612840d ]
It may need hold Global Config Lock a longer time when download DDP
package file, extend the timeout value to 5000ms to ensure that
download can be finished before other AQ command got time to run,
this will fix the issue below when probe the device, 5000ms is a test
value that work with both Backplane and BreakoutCable NVM image:
ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG
ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT
ice 0000:f4:00.0: probe failed due to setup PF switch: -12
ice: probe of 0000:f4:00.0 failed with error -12
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 897120d41e ]
Checking value of MCP_INTF in mcp23s08_irq suggests that the handler may be
called even when there is no interrupt pending.
But the actual interrupt could happened between reading MCP_INTF and MCP_GPIO.
In this situation we got nothing from MCP_INTF, but the event gets acknowledged
on the expander by reading MCP_GPIO. This leads to losing events.
Fix the problem by not reading any register until we see something in MCP_INTF.
The error was reproduced and fix tested on MCP23017.
Signed-off-by: Radim Pavlik <radim.pavlik@tbs-biometrics.com>
Link: https://lore.kernel.org/r/AM7PR06MB6769E1183F68DEBB252F665ABA3E9@AM7PR06MB6769.eurprd06.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcb3463585 ]
According to the standard IEC 62439-2, the number of transitions needs
to be counted for each transition 'between' ring state open and ring
state closed and not from open state to closed state.
Therefore fix this for both ring and interconnect ring.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ffbbb435d ]
Introduce the BIO flag BIO_ZONE_WRITE_LOCKED to indicate that a BIO owns
the write lock of the zone it is targeting. This is the counterpart of
the struct request flag RQF_ZONE_WRITE_LOCKED.
This new BIO flag is reserved for now for zone write locking control
for device mapper targets exposing a zoned block device. Since in this
case, the lock flag must not be propagated to the struct request that
will be used to process the BIO, a BIO private flag is used rather than
changing the RQF_ZONE_WRITE_LOCKED request flag into a common REQ_XXX
flag that could be used for both BIO and request. This avoids conflicts
down the stack with the block IO scheduler zone write locking
(in mq-deadline).
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6842d264aa ]
Fix dm_accept_partial_bio() to actually check that zone management
commands are not passed as explained in the function documentation
comment. Also, since a zone append operation cannot be split, add
REQ_OP_ZONE_APPEND as a forbidden command.
White lines are added around the group of BUG_ON() calls to make the
code more legible.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee50cc19d8 ]
If dm-writecache overwrites existing cached data, it splits the
incoming bio into many block-sized bios. The I/O scheduler does merge
these bios into one large request but this needless splitting and
merging causes performance degradation.
Fix this by avoiding bio splitting if the cache target area that is
being overwritten is contiguous.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5faafc77f7 ]
Current commit code resets the place where the search for free blocks
will begin back to the start of the metadata device. There are a couple
of repercussions to this:
- The first allocation after the commit is likely to take longer than
normal as it searches for a free block in an area that is likely to
have very few free blocks (if any).
- Any free blocks it finds will have been recently freed. Reusing them
means we have fewer old copies of the metadata to aid recovery from
hardware error.
Fix these issues by leaving the cursor alone, only resetting when the
search hits the end of the metadata device.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e32ea44c7a ]
Including <linux/in.h> and <netinet/in.h> in the dependencies breaks
compilation of trinity due to multiple definitions. <linux/in.h> is only
used in <linux/icmp.h> to provide the definition of the struct in_addr,
but this can be substituted out by using the datatype __be32.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a29cb69146 ]
This patch aims to improve the situation when reordering and loss are
ocurring in the same flight of packets.
Previously the reordering would first induce a spurious recovery, then
the subsequent ACK may undo the cwnd (based on the timestamps e.g.).
However the current loss recovery does not proceed to invoke
RACK to install a reordering timer. If some packets are also lost, this
may lead to a long RTO-based recovery. An example is
https://groups.google.com/g/bbr-dev/c/OFHADvJbTEI
The solution is to after reverting the recovery, always invoke RACK
to either mount the RACK timer to fast retransmit after the reordering
window, or restarts the recovery if new loss is identified. Hence
it is possible the sender may go from Recovery to Disorder/Open to
Recovery again in one ACK.
Reported-by: mingkun bian <bianmingkun@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d9c70d235 ]
Take the situation with gfxoff, the optimization may cause
corrupt CE ram contents. In addition emit_cntxcntl callback
has similar optimization which firmware can handle properly
even for power feature.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06888d571b ]
Instead of reading the desired 5 bytes of the actual target field,
the code was reading 8. This could result in a corrupted value if the
trailing 3 bytes were non-zero, so instead use an appropriately sized
and zero-initialized bounce buffer, and read only 5 bytes before casting
to u64.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eba9852372 ]
Although the kfd_ioctl_get_dmabuf_info() still fail it will indicate
the caller right metadat_size useful for the same kfd ioctl next time.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb3849370a ]
The clock driving the XBurst CPUs in Ingenic SoCs is integer divided
from the main PLL. As such, it is possible to control the frequency of
the CPU, either by changing the divider, or by changing the rate of the
main PLL.
The XBurst CPUs also lack the CP0 timer; the TCU, a separate piece of
hardware in the SoC, provides this functionality.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc52f92a65 ]
Ingenic JZ4760 and JZ4760B do have a FPU, but the config registers don't
report it. Force the FPU detection in case the processor ID match the
JZ4760(B) one.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62f20e068c ]
This is a complement to commit aa6dd211e4 ("inet: use bigger hash
table for IP ID generation"), but focusing on some specific aspects
of IPv6.
Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a
minimum MTU of 1280, it's much less easy to force a remote peer to
produce many fragments to explore its ID sequence. In addition packet
IDs are 32-bit in IPv6, which further complicates their analysis. On
the other hand, it is often easier to choose among plenty of possible
source addresses and partially work around the bigger hash table the
commit above permits, which leaves IPv6 partially exposed to some
possibilities of remote analysis at the risk of weakening some
protocols like DNS if some IDs can be predicted with a good enough
probability.
Given the wide range of permitted IDs, the risk of collision is extremely
low so there's no need to rely on the positive increment algorithm that
is shared with the IPv4 code via ip_idents_reserve(). We have a fast
PRNG, so let's simply call prandom_u32() and be done with it.
Performance measurements at 10 Gbps couldn't show any difference with
the previous code, even when using a single core, because due to the
large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost
of the random generation is completely offset by other operations and by
the network transfer time. In addition, this change removes the need to
update a shared entry in the idents table so it may even end up being
slightly faster on large scale systems where this matters.
The risk of at least one collision here is about 1/80 million among
10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs,
which remains very low compared to IPv4 where all IDs are reused
every 4 to 80ms on a 10 Gbps flow depending on packet sizes.
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7196048cd ]
The PLLU (USB) consists of the PLL configuration itself and configuration
of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114,
where T114 immediately bails out if PLLU is enabled and T30 re-enables
a potentially already enabled PLL (left after bootloader) and then fully
reprograms it, which could be unsafe to do. The correct way should be to
skip enabling of the PLL if it's already enabled and then apply
configuration to the outputs. This patch doesn't fix any known problems,
it's a minor improvement.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c592c8a28f ]
The refcounting of the gate clocks has a bug causing the enable_refcnt
to underflow when unused clocks are disabled. This happens because clk
provider erroneously bumps the refcount if clock is enabled at a boot
time, which it shouldn't be doing, and it does this only for the gate
clocks, while peripheral clocks are using the same gate ops and the
peripheral clocks are missing the initial bump. Hence the refcount of
the peripheral clocks is 0 when unused clocks are disabled and then the
counter is decremented further by the gate ops, causing the integer
underflow.
Fix this problem by removing the erroneous bump and by implementing the
disable_unused() callback, which disables the unused gates properly.
The visible effect of the bug is such that the unused clocks are never
gated if a loaded kernel module grabs the unused clocks and starts to use
them. In practice this shouldn't cause any real problems for the drivers
and boards supported by the kernel today.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e16efff4e5 ]
The driver currently exposes several YUV formats but fails to properly
program all the registers needed to display such formats. Add the right
programming sequences so that overlay windows can be used to accelerate
color format conversions in multimedia playback use-cases.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4751d2aa32 ]
stmmac_mdio_register() has logic to search for PHYs on the MDIO bus and
assign them IRQ lines, as well as to set priv->plat->phy_addr.
If no PHY is found, the "found" variable remains set to 0 and the
function errors out.
After the introduction of commit f213bbe8a9 ("net: stmmac: Integrate
it with DesignWare XPCS"), the "found" variable was immediately reused
for searching for a PCS on the same MDIO bus.
This can result in 2 types of potential problems (none of them seems to
be seen on the only Intel system that sets has_xpcs = true, otherwise it
would have been reported):
1. If a PCS is found but a PHY is not, then the code happily exits with
no error. One might say "yes, but this is not possible, because
of_mdiobus_register will probe a PHY for all MDIO addresses,
including for the XPCS, so if an XPCS exists, then a PHY certainly
exists too". Well, that is not true, see intel_mgbe_common_data():
/* Ensure mdio bus scan skips intel serdes and pcs-xpcs */
plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR;
plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR;
2. A PHY is found but an MDIO device with the XPCS PHY ID isn't, and in
that case, the error message will be "No PHY found". Confusing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210527155959.3270478-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8613641063 ]
Fix the logic so that if both ports netdevices are enabled or disabled,
use the trivial mapping without swapping.
If only one of the netdevice's tx is enabled, use it to remap traffic to
that port.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c07274ab1a ]
rep_tc copy REG_C1 to REG_B. IPsec crypto utilizes the whole REG_B
register with BIT31 as IPsec marker. rep_tc_update_skb drops
IPsec because it thought REG_B contains bad value.
In previous patch, BIT 31 of REG_C1 is reserved for IPsec.
Skip the rep_tc_update_skb if BIT31 of REG_B is set.
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6566cae7ae ]
There are two issues with scaling calculations, odm recout
calculation and matching viewport to actual recout.
This change fixes both issues. Odm recout calculation via
special casing and viewport matching issue by reworking
the viewport calcualtion to use scaling ratios and recout
to derrive the required offset and size.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b514958dd1 ]
The igb driver was trying hard to be sparse correct, but somehow
ended up converting a variable into little endian order and then
tries to OR something with it.
A much plainer way of doing things is to leave all variables and
OR operations in CPU (non-endian) mode, and then convert to
little endian only once, which is what this change does.
This probably fixes a bug that might have been seen only on
big endian systems.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7cbfb028b ]
The sparse build (C=2) finds some issues with how the driver
dealt with the (very difficult) hardware that in some generations
uses little-endian, and in others uses big endian, for the VLAN
field. The code as written picks __le16 as a type and for some
hardware revisions we override it to __be16 as done in this
patch. This impacted the VF driver as well so fix it there too.
Also change the vlan_tci assignment to override the sparse
warning without changing functionality.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4ef55288a ]
Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.
Fix these by being explicit about the conversions using
le16_to_cpu().
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0d62baa7f ]
Printing kernel pointers is discouraged because they might leak kernel
memory layout. This fixes smatch warning:
drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn:
argument 4 to %08lX specifier is cast from pointer
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa236c2b2d ]
In function udf_symlink, epos.bh is assigned with the value returned
by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c
and returns the value of sb_getblk function that could be NULL.
Then, epos.bh is used without any check, causing a possible
NULL pointer dereference when sb_getblk fails.
This fix adds a check to validate the value of epos.bh.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213083
Signed-off-by: Arturo Giusti <koredump@protonmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c61cdbdbff ]
Problem: If scheduler is already stopped by the time sched_entity
is released and entity's job_queue not empty I encountred
a hang in drm_sched_entity_flush. This is because drm_sched_entity_is_idle
never becomes false.
Fix: In drm_sched_fini detach all sched_entities from the
scheduler's run queues. This will satisfy drm_sched_entity_is_idle.
Also wakeup all those processes stuck in sched_entity flushing
as the scheduler main thread which wakes them up is stopped by now.
v2:
Reverse order of drm_sched_rq_remove_entity and marking
s_entity as stopped to prevent reinserion back to rq due
to race.
v3:
Drop drm_sched_rq_remove_entity, only modify entity->stopped
and check for it in drm_sched_entity_is_idle
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-14-andrey.grodzovsky@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20e76d3d04 ]
In case of error, the function mdiobus_get_phy() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05ff8435e5 ]
modern userspace applications, like OVN, can configure the TC datapath to
"recirculate" packets several times. If more than 4 "recirculation" rules
are configured, packets can be dropped by __tcf_classify().
Changing the maximum number of reclassifications (from 4 to 16) should be
sufficient to prevent drops in most use cases, and guard against loops at
the same time.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86544c3de6 ]
Similar to the way in which of_mdiobus_register() has a fallback to the
non-DT based mdiobus_register() when CONFIG_OF is not set, we can create
a shim for the device-managed devm_of_mdiobus_register() which calls
devm_mdiobus_register() and discards the struct device_node *.
In particular, this solves a build issue with the qca8k DSA driver which
uses devm_of_mdiobus_register and can be compiled without CONFIG_OF.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b097bea102 ]
mdio drivers should not use REGCHACHE. Also disable locking since it's
handled by the mdio users and regmap is always accessed atomically.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09da319182 ]
GPUs with more than a single regulator (e.g. G72 on MT8183) will
require platform-specific handling for devfreq, for 2 reasons:
1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator)
does not support multiple regulators, so we'll need custom
handlers.
2. Generally, platforms with 2 regulators have platform-specific
constraints on how the voltages should be set (e.g.
minimum/maximum voltage difference between them), so we
should not just create generic handlers that simply
change the voltages without taking care of those constraints.
Disable devfreq for now on those GPUs.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421132841.v13.3.I3af068abe30c9c85cabc4486385c52e56527a509@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69777e6ca3 ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Li <wangli74@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8380c81d5c ]
__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.
On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.
Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.
The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34e7434ba4 ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 009fc857c5 ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c72e6ab66 ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33ae8f801a ]
If multiple threads are accessing the same huge page at the same
time, hugetlb_cow will be called if one thread write the COW huge
page. And function huge_ptep_clear_flush is called to notify other
threads to clear the huge pte tlb entry. The other threads clear
the huge pte tlb entry and reload it from page table, the reload
huge pte entry may be old.
This patch fixes this issue on mips platform, and it clears huge
pte entry before notifying other threads to flush current huge
page entry, it is similar with other architectures.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a73022ee3 ]
On the Loongson64 platform, if CONFIG_SMP is not set, the following build
error will occur:
arch/mips/loongson64/reset.c:133:2: error:'secondary_kexec_args' undeclared
Because the definition and declaration of secondary_kexec_args are in the
CONFIG_SMP, the secondary_kexec_args variable should be used in CONFIG_SMP.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31bef1cb1 ]
[Why]
Currently, the code that fills the clock table can miss filling
information about some of the higher voltage states advertised
by the SMU. This, in turn, may cause some of the higher pixel clock
modes (e.g. 8k60) to fail validation.
[How]
Fill the table with one entry per DCFCLK level instead of one entry
per FCLK level. This is needed because the maximum FCLK does not
necessarily need maximum voltage, whereas DCFCLK values from SMU
cover the full voltage range.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 443ef39b49 ]
Sparse is not happy about handling of strict types in pch_ptp_match():
.../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types)
.../pch_gbe_main.c:158:33: expected unsigned short [usertype] uid_hi
.../pch_gbe_main.c:158:33: got restricted __be16 [usertype]
.../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types)
.../pch_gbe_main.c:158:45: expected unsigned int [usertype] uid_lo
.../pch_gbe_main.c:158:45: got restricted __be32 [usertype]
.../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types)
.../pch_gbe_main.c:158:56: expected unsigned short [usertype] seqid
.../pch_gbe_main.c:158:56: got restricted __be16 [usertype]
Fix that by switching to use proper accessors to BE data.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94dfec48fc ]
Some standard resolutions like 1366x768 do not work properly with
i.MX6 SoCs, since the horizontal resolution needs to be aligned
to 8 pixels (so 1360x768 or 1368x768 would work).
This patch allocates framebuffers allocated to 8 pixels. The extra
time required to send the extra pixels are removed from the blank
time. In order to expose the correct display size to userspace,
the stride is increased without increasing the width.
Without this patch systems with this display resolution hang
indefinitely during boot up.
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210428222953.235280-3-sebastian.reichel@collabora.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95ea3dbc4e ]
Disable all ip's hw status to false before any hw_init.
Only set it to true until its hw_init is executed.
The old 5.9 branch has this change but somehow the 5.11 kernrel does
not have this fix.
Without this change, sriov tdr have gfx IB test fail.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Review-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5433a9f69 ]
[Why]
This change only fix dpp clock switch to lower case.
New solution later can fix both case, which is "dc: skip
program clock when allow seamless boot"
[How]
This reverts commit "dc: wait vblank when stream enabled
and update dpp clock"
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba4e0339a6 ]
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
