Linux 4.19.6

commit a8f438c684 upstream.

When switching from auto to manual mode, V4L2 core is calling
g_volatile_ctrl() in manual mode in order to get the manual initial value.
Remove the manual mode check/return to not break this behaviour.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/admin-guide/kernel-parameters.txt

@@ -1063,7 +1063,7 @@
 			earlyprintk=serial[,0x...[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
-			earlyprintk=pciserial,bus:device.function[,baudrate]
+			earlyprintk=pciserial[,force],bus:device.function[,baudrate]
 			earlyprintk=xdbc[xhciController#]
 
 			earlyprintk is useful when the kernel crashes before
@@ -1095,6 +1095,10 @@
 
 			The sclp output can only be used on s390.
 
+			The optional "force" to "pciserial" enables use of a
+			PCI device even when its classcode is not of the
+			UART class.
+
 	edac_report=	[HW,EDAC] Control how to report EDAC event
 			Format: {"on" | "off" | "force"}
 			on: enable EDAC to report H/W event. May be overridden
@@ -4683,6 +4687,8 @@
 					prevent spurious wakeup);
 				n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
 					pause after every control message);
+				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+					delay after resetting its port);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=

Documentation/admin-guide/security-bugs.rst

@@ -26,23 +26,35 @@ information is helpful.  Any exploit code is very helpful and will not
 be released without consent from the reporter unless it has already been
 made public.
 
-Disclosure
-----------
+Disclosure and embargoed information
+------------------------------------
 
-The goal of the Linux kernel security team is to work with the bug
-submitter to understand and fix the bug.  We prefer to publish the fix as
-soon as possible, but try to avoid public discussion of the bug itself
-and leave that to others.
+The security list is not a disclosure channel.  For that, see Coordination
+below.
 
-Publishing the fix may be delayed when the bug or the fix is not yet
-fully understood, the solution is not well-tested or for vendor
-coordination.  However, we expect these delays to be short, measurable in
-days, not weeks or months.  A release date is negotiated by the security
-team working with the bug submitter as well as vendors.  However, the
-kernel security team holds the final say when setting a timeframe.  The
-timeframe varies from immediate (esp. if it's already publicly known bug)
-to a few weeks.  As a basic default policy, we expect report date to
-release date to be on the order of 7 days.
+Once a robust fix has been developed, the release process starts.  Fixes
+for publicly known bugs are released immediately.
+
+Although our preference is to release fixes for publicly undisclosed bugs
+as soon as they become available, this may be postponed at the request of
+the reporter or an affected party for up to 7 calendar days from the start
+of the release process, with an exceptional extension to 14 calendar days
+if it is agreed that the criticality of the bug requires more time.  The
+only valid reason for deferring the publication of a fix is to accommodate
+the logistics of QA and large scale rollouts which require release
+coordination.
+
+Whilst embargoed information may be shared with trusted individuals in
+order to develop a fix, such information will not be published alongside
+the fix or on any other disclosure channel without the permission of the
+reporter.  This includes but is not limited to the original bug report
+and followup discussions (if any), exploits, CVE information or the
+identity of the reporter.
+
+In other words our only interest is in getting bugs fixed.  All other
+information submitted to the security list and any followup discussions
+of the report are treated confidentially even after the embargo has been
+lifted, in perpetuity.
 
 Coordination
 ------------
@@ -68,7 +80,7 @@ may delay the bug handling. If a reporter wishes to have a CVE identifier
 assigned ahead of public disclosure, they will need to contact the private
 linux-distros list, described above. When such a CVE identifier is known
 before a patch is provided, it is desirable to mention it in the commit
-message, though.
+message if the reporter agrees.
 
 Non-disclosure agreements
 -------------------------

Documentation/devicetree/bindings/net/can/holt_hi311x.txt

@@ -17,7 +17,7 @@ Example:
 		reg = <1>;
 		clocks = <&clk32m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
 	};

Documentation/filesystems/fscrypt.rst

@@ -191,21 +191,11 @@ Currently, the following pairs of encryption modes are supported:
 
 - AES-256-XTS for contents and AES-256-CTS-CBC for filenames
 - AES-128-CBC for contents and AES-128-CTS-CBC for filenames
-- Speck128/256-XTS for contents and Speck128/256-CTS-CBC for filenames
 
 It is strongly recommended to use AES-256-XTS for contents encryption.
 AES-128-CBC was added only for low-powered embedded devices with
 crypto accelerators such as CAAM or CESA that do not support XTS.
 
-Similarly, Speck128/256 support was only added for older or low-end
-CPUs which cannot do AES fast enough -- especially ARM CPUs which have
-NEON instructions but not the Cryptography Extensions -- and for which
-it would not otherwise be feasible to use encryption at all.  It is
-not recommended to use Speck on CPUs that have AES instructions.
-Speck support is only available if it has been enabled in the crypto
-API via CONFIG_CRYPTO_SPECK.  Also, on ARM platforms, to get
-acceptable performance CONFIG_CRYPTO_SPECK_NEON must be enabled.
-
 New encryption modes can be added relatively easily, without changes
 to individual filesystems.  However, authenticated encryption (AE)
 modes are not currently supported because of the difficulty of dealing

Documentation/filesystems/overlayfs.txt

@@ -286,6 +286,12 @@ pointed by REDIRECT. This should not be possible on local system as setting
 "trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible
 for untrusted layers like from a pen drive.
 
+Note: redirect_dir={off|nofollow|follow(*)} conflicts with metacopy=on, and
+results in an error.
+
+(*) redirect_dir=follow only conflicts with metacopy=on if upperdir=... is
+given.
+
 Sharing and copying layers
 --------------------------
 

Documentation/media/uapi/cec/cec-ioc-receive.rst

@@ -16,10 +16,10 @@ CEC_RECEIVE, CEC_TRANSMIT - Receive or transmit a CEC message
 Synopsis
 ========
 
-.. c:function:: int ioctl( int fd, CEC_RECEIVE, struct cec_msg *argp )
+.. c:function:: int ioctl( int fd, CEC_RECEIVE, struct cec_msg \*argp )
     :name: CEC_RECEIVE
 
-.. c:function:: int ioctl( int fd, CEC_TRANSMIT, struct cec_msg *argp )
+.. c:function:: int ioctl( int fd, CEC_TRANSMIT, struct cec_msg \*argp )
     :name: CEC_TRANSMIT
 
 Arguments
@@ -272,6 +272,19 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - The transmit failed after one or more retries. This status bit is
 	mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`.
 	Other bits can still be set to explain which failures were seen.
+    * .. _`CEC-TX-STATUS-ABORTED`:
+
+      - ``CEC_TX_STATUS_ABORTED``
+      - 0x40
+      - The transmit was aborted due to an HDMI disconnect, or the adapter
+        was unconfigured, or a transmit was interrupted, or the driver
+	returned an error when attempting to start a transmit.
+    * .. _`CEC-TX-STATUS-TIMEOUT`:
+
+      - ``CEC_TX_STATUS_TIMEOUT``
+      - 0x80
+      - The transmit timed out. This should not normally happen and this
+	indicates a driver problem.
 
 
 .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
@@ -300,6 +313,14 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - The message was received successfully but the reply was
 	``CEC_MSG_FEATURE_ABORT``. This status is only set if this message
 	was the reply to an earlier transmitted message.
+    * .. _`CEC-RX-STATUS-ABORTED`:
+
+      - ``CEC_RX_STATUS_ABORTED``
+      - 0x08
+      - The wait for a reply to an earlier transmitted message was aborted
+        because the HDMI cable was disconnected, the adapter was unconfigured
+	or the :ref:`CEC_TRANSMIT <CEC_RECEIVE>` that waited for a
+	reply was interrupted.
 
 
 

Documentation/media/uapi/v4l/biblio.rst

@@ -226,16 +226,6 @@ xvYCC
 
 :author:    International Electrotechnical Commission (http://www.iec.ch)
 
-.. _adobergb:
-
-AdobeRGB
-========
-
-
-:title:     Adobe© RGB (1998) Color Image Encoding Version 2005-05
-
-:author:    Adobe Systems Incorporated (http://www.adobe.com)
-
 .. _oprgb:
 
 opRGB

Documentation/media/uapi/v4l/colorspaces-defs.rst

@@ -51,8 +51,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
       - See :ref:`col-rec709`.
     * - ``V4L2_COLORSPACE_SRGB``
       - See :ref:`col-srgb`.
-    * - ``V4L2_COLORSPACE_ADOBERGB``
-      - See :ref:`col-adobergb`.
+    * - ``V4L2_COLORSPACE_OPRGB``
+      - See :ref:`col-oprgb`.
     * - ``V4L2_COLORSPACE_BT2020``
       - See :ref:`col-bt2020`.
     * - ``V4L2_COLORSPACE_DCI_P3``
@@ -90,8 +90,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
       - Use the Rec. 709 transfer function.
     * - ``V4L2_XFER_FUNC_SRGB``
       - Use the sRGB transfer function.
-    * - ``V4L2_XFER_FUNC_ADOBERGB``
-      - Use the AdobeRGB transfer function.
+    * - ``V4L2_XFER_FUNC_OPRGB``
+      - Use the opRGB transfer function.
     * - ``V4L2_XFER_FUNC_SMPTE240M``
       - Use the SMPTE 240M transfer function.
     * - ``V4L2_XFER_FUNC_NONE``

Documentation/media/uapi/v4l/colorspaces-details.rst

@@ -290,15 +290,14 @@ Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
 170M/BT.601. The Y'CbCr quantization is limited range.
 
 
-.. _col-adobergb:
+.. _col-oprgb:
 
-Colorspace Adobe RGB (V4L2_COLORSPACE_ADOBERGB)
+Colorspace opRGB (V4L2_COLORSPACE_OPRGB)
 ===============================================
 
-The :ref:`adobergb` standard defines the colorspace used by computer
-graphics that use the AdobeRGB colorspace. This is also known as the
-:ref:`oprgb` standard. The default transfer function is
-``V4L2_XFER_FUNC_ADOBERGB``. The default Y'CbCr encoding is
+The :ref:`oprgb` standard defines the colorspace used by computer
+graphics that use the opRGB colorspace. The default transfer function is
+``V4L2_XFER_FUNC_OPRGB``. The default Y'CbCr encoding is
 ``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
 range.
 
@@ -312,7 +311,7 @@ The chromaticities of the primary colors and the white reference are:
 
 .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
 
-.. flat-table:: Adobe RGB Chromaticities
+.. flat-table:: opRGB Chromaticities
     :header-rows:  1
     :stub-columns: 0
     :widths:       1 1 2

Documentation/media/videodev2.h.rst.exceptions

@@ -56,7 +56,8 @@ replace symbol V4L2_MEMORY_USERPTR :c:type:`v4l2_memory`
 # Documented enum v4l2_colorspace
 replace symbol V4L2_COLORSPACE_470_SYSTEM_BG :c:type:`v4l2_colorspace`
 replace symbol V4L2_COLORSPACE_470_SYSTEM_M :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_ADOBERGB :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_OPRGB :c:type:`v4l2_colorspace`
+replace define V4L2_COLORSPACE_ADOBERGB :c:type:`v4l2_colorspace`
 replace symbol V4L2_COLORSPACE_BT2020 :c:type:`v4l2_colorspace`
 replace symbol V4L2_COLORSPACE_DCI_P3 :c:type:`v4l2_colorspace`
 replace symbol V4L2_COLORSPACE_DEFAULT :c:type:`v4l2_colorspace`
@@ -69,7 +70,8 @@ replace symbol V4L2_COLORSPACE_SRGB :c:type:`v4l2_colorspace`
 
 # Documented enum v4l2_xfer_func
 replace symbol V4L2_XFER_FUNC_709 :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_ADOBERGB :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_OPRGB :c:type:`v4l2_xfer_func`
+replace define V4L2_XFER_FUNC_ADOBERGB :c:type:`v4l2_xfer_func`
 replace symbol V4L2_XFER_FUNC_DCI_P3 :c:type:`v4l2_xfer_func`
 replace symbol V4L2_XFER_FUNC_DEFAULT :c:type:`v4l2_xfer_func`
 replace symbol V4L2_XFER_FUNC_NONE :c:type:`v4l2_xfer_func`

Documentation/x86/x86_64/mm.txt

@@ -4,8 +4,9 @@ Virtual memory map with 4 level page tables:
 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
 hole caused by [47:63] sign extension
 ffff800000000000 - ffff87ffffffffff (=43 bits) guard hole, reserved for hypervisor
-ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
-ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
+ffff880000000000 - ffff887fffffffff (=39 bits) LDT remap for PTI
+ffff888000000000 - ffffc87fffffffff (=64 TB) direct mapping of all phys. memory
+ffffc88000000000 - ffffc8ffffffffff (=39 bits) hole
 ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
 ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
 ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
@@ -30,8 +31,9 @@ Virtual memory map with 5 level page tables:
 0000000000000000 - 00ffffffffffffff (=56 bits) user space, different per mm
 hole caused by [56:63] sign extension
 ff00000000000000 - ff0fffffffffffff (=52 bits) guard hole, reserved for hypervisor
-ff10000000000000 - ff8fffffffffffff (=55 bits) direct mapping of all phys. memory
-ff90000000000000 - ff9fffffffffffff (=52 bits) LDT remap for PTI
+ff10000000000000 - ff10ffffffffffff (=48 bits) LDT remap for PTI
+ff11000000000000 - ff90ffffffffffff (=55 bits) direct mapping of all phys. memory
+ff91000000000000 - ff9fffffffffffff (=3840 TB) hole
 ffa0000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space (12800 TB)
 ffd2000000000000 - ffd3ffffffffffff (=49 bits) hole
 ffd4000000000000 - ffd5ffffffffffff (=49 bits) virtual memory map (512TB)

MAINTAINERS

@@ -13769,6 +13769,7 @@ F:	drivers/i2c/busses/i2c-stm32*
 
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Sasha Levin <sashal@kernel.org>
 L:	stable@vger.kernel.org
 S:	Supported
 F:	Documentation/process/stable-kernel-rules.rst

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 0
+SUBLEVEL = 6
 EXTRAVERSION =
 NAME = "People's Front"
 

arch/alpha/include/asm/termios.h

@@ -73,9 +73,15 @@
 })
 
 #define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
+	copy_from_user(k, u, sizeof(struct termios2))
 
 #define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios2))
+
+#define user_termios_to_kernel_termios_1(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios_1(u, k) \
 	copy_to_user(u, k, sizeof(struct termios))
 
 #endif	/* _ALPHA_TERMIOS_H */

arch/alpha/include/uapi/asm/ioctls.h

@@ -32,6 +32,11 @@
 #define TCXONC		_IO('t', 30)
 #define TCFLSH		_IO('t', 31)
 
+#define TCGETS2		_IOR('T', 42, struct termios2)
+#define TCSETS2		_IOW('T', 43, struct termios2)
+#define TCSETSW2	_IOW('T', 44, struct termios2)
+#define TCSETSF2	_IOW('T', 45, struct termios2)
+
 #define TIOCSWINSZ	_IOW('t', 103, struct winsize)
 #define TIOCGWINSZ	_IOR('t', 104, struct winsize)
 #define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */

arch/alpha/include/uapi/asm/termbits.h

@@ -26,6 +26,19 @@ struct termios {
 	speed_t c_ospeed;		/* output speed */
 };
 
+/* Alpha has identical termios and termios2 */
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
 /* Alpha has matching termios and ktermios */
 
 struct ktermios {
@@ -152,6 +165,7 @@ struct ktermios {
 #define B3000000  00034
 #define B3500000  00035
 #define B4000000  00036
+#define BOTHER    00037
 
 #define CSIZE	00001400
 #define   CS5	00000000
@@ -169,6 +183,9 @@ struct ktermios {
 #define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
+#define CIBAUD	07600000
+#define IBSHIFT	16
+
 /* c_lflag bits */
 #define ISIG	0x00000080
 #define ICANON	0x00000100

arch/arm/boot/dts/dra7.dtsi

@@ -354,7 +354,7 @@
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/exynos4210-origen.dts

@@ -151,6 +151,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max8997_irq>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>;
 		max8997,pmic-buck2-dvs-voltage = <1100000>;
@@ -288,6 +290,13 @@
 	};
 };
 
+&pinctrl_1 {
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-3", "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &sdhci_0 {
 	bus-width = <4>;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;

arch/arm/boot/dts/exynos5250.dtsi

@@ -54,62 +54,109 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
-			clock-frequency = <1700000000>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			clock-frequency = <1700000000>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+			clock-latency-ns = <140000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1125000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <140000>;
+		};
+	};
+
 	soc: soc {
 		sysram@2020000 {
 			compatible = "mmio-sram";

arch/arm/boot/dts/imx53-ppd.dts

@@ -55,7 +55,7 @@
 	};
 
 	chosen {
-		stdout-path = "&uart1:115200n8";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@70000000 {

arch/arm/boot/dts/imx6sll.dtsi

@@ -709,7 +709,7 @@
 			i2c1: i2c@21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_I2C1>;

arch/arm/boot/dts/imx6ull-pinfunc.h

@@ -14,14 +14,23 @@
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
 #define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX                    0x0084 0x0310 0x0644 0x9 0x4
 #define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX                    0x0088 0x0314 0x0644 0x9 0x5
 #define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS                     0x008C 0x0318 0x0640 0x9 0x3
 #define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS                     0x0090 0x031C 0x0640 0x9 0x4
-#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
-#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
-#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
-#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
 #define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
 #define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
 #define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
@@ -55,7 +64,6 @@
 #define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
 #define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -613,7 +613,7 @@
 			status = "disabled";
 		};
 
-		sdr: sdr@ffc25000 {
+		sdr: sdr@ffcfb100 {
 			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffcfb100 0x80>;
 		};

arch/arm/boot/dts/vf610m4-colibri.dts

@@ -50,8 +50,8 @@
 	compatible = "fsl,vf610m4";
 
 	chosen {
-		bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
-		stdout-path = "&uart2";
+		bootargs = "clk_ignore_unused init=/linuxrc rw";
+		stdout-path = "serial2:115200";
 	};
 
 	memory@8c000000 {

arch/arm/configs/imx_v6_v7_defconfig

@@ -409,6 +409,7 @@ CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y

arch/arm/crypto/Kconfig

@@ -121,10 +121,4 @@ config CRYPTO_CHACHA20_NEON
 	select CRYPTO_BLKCIPHER
 	select CRYPTO_CHACHA20
 
-config CRYPTO_SPECK_NEON
-	tristate "NEON accelerated Speck cipher algorithms"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_BLKCIPHER
-	select CRYPTO_SPECK
-
 endif

arch/arm/crypto/Makefile

@@ -10,7 +10,6 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
 obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
 obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o
-obj-$(CONFIG_CRYPTO_SPECK_NEON) += speck-neon.o
 
 ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
 ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
@@ -54,7 +53,6 @@ ghash-arm-ce-y	:= ghash-ce-core.o ghash-ce-glue.o
 crct10dif-arm-ce-y	:= crct10dif-ce-core.o crct10dif-ce-glue.o
 crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
 chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
-speck-neon-y := speck-neon-core.o speck-neon-glue.o
 
 ifdef REGENERATE_ARM_CRYPTO
 quiet_cmd_perl = PERL    $@

arch/arm/crypto/speck-neon-core.S

@@ -1,434 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * NEON-accelerated implementation of Speck128-XTS and Speck64-XTS
- *
- * Copyright (c) 2018 Google, Inc
- *
- * Author: Eric Biggers <ebiggers@google.com>
- */
-
-#include <linux/linkage.h>
-
-	.text
-	.fpu		neon
-
-	// arguments
-	ROUND_KEYS	.req	r0	// const {u64,u32} *round_keys
-	NROUNDS		.req	r1	// int nrounds
-	DST		.req	r2	// void *dst
-	SRC		.req	r3	// const void *src
-	NBYTES		.req	r4	// unsigned int nbytes
-	TWEAK		.req	r5	// void *tweak
-
-	// registers which hold the data being encrypted/decrypted
-	X0		.req	q0
-	X0_L		.req	d0
-	X0_H		.req	d1
-	Y0		.req	q1
-	Y0_H		.req	d3
-	X1		.req	q2
-	X1_L		.req	d4
-	X1_H		.req	d5
-	Y1		.req	q3
-	Y1_H		.req	d7
-	X2		.req	q4
-	X2_L		.req	d8
-	X2_H		.req	d9
-	Y2		.req	q5
-	Y2_H		.req	d11
-	X3		.req	q6
-	X3_L		.req	d12
-	X3_H		.req	d13
-	Y3		.req	q7
-	Y3_H		.req	d15
-
-	// the round key, duplicated in all lanes
-	ROUND_KEY	.req	q8
-	ROUND_KEY_L	.req	d16
-	ROUND_KEY_H	.req	d17
-
-	// index vector for vtbl-based 8-bit rotates
-	ROTATE_TABLE	.req	d18
-
-	// multiplication table for updating XTS tweaks
-	GF128MUL_TABLE	.req	d19
-	GF64MUL_TABLE	.req	d19
-
-	// current XTS tweak value(s)
-	TWEAKV		.req	q10
-	TWEAKV_L	.req	d20
-	TWEAKV_H	.req	d21
-
-	TMP0		.req	q12
-	TMP0_L		.req	d24
-	TMP0_H		.req	d25
-	TMP1		.req	q13
-	TMP2		.req	q14
-	TMP3		.req	q15
-
-	.align		4
-.Lror64_8_table:
-	.byte		1, 2, 3, 4, 5, 6, 7, 0
-.Lror32_8_table:
-	.byte		1, 2, 3, 0, 5, 6, 7, 4
-.Lrol64_8_table:
-	.byte		7, 0, 1, 2, 3, 4, 5, 6
-.Lrol32_8_table:
-	.byte		3, 0, 1, 2, 7, 4, 5, 6
-.Lgf128mul_table:
-	.byte		0, 0x87
-	.fill		14
-.Lgf64mul_table:
-	.byte		0, 0x1b, (0x1b << 1), (0x1b << 1) ^ 0x1b
-	.fill		12
-
-/*
- * _speck_round_128bytes() - Speck encryption round on 128 bytes at a time
- *
- * Do one Speck encryption round on the 128 bytes (8 blocks for Speck128, 16 for
- * Speck64) stored in X0-X3 and Y0-Y3, using the round key stored in all lanes
- * of ROUND_KEY.  'n' is the lane size: 64 for Speck128, or 32 for Speck64.
- *
- * The 8-bit rotates are implemented using vtbl instead of vshr + vsli because
- * the vtbl approach is faster on some processors and the same speed on others.
- */
-.macro _speck_round_128bytes	n
-
-	// x = ror(x, 8)
-	vtbl.8		X0_L, {X0_L}, ROTATE_TABLE
-	vtbl.8		X0_H, {X0_H}, ROTATE_TABLE
-	vtbl.8		X1_L, {X1_L}, ROTATE_TABLE
-	vtbl.8		X1_H, {X1_H}, ROTATE_TABLE
-	vtbl.8		X2_L, {X2_L}, ROTATE_TABLE
-	vtbl.8		X2_H, {X2_H}, ROTATE_TABLE
-	vtbl.8		X3_L, {X3_L}, ROTATE_TABLE
-	vtbl.8		X3_H, {X3_H}, ROTATE_TABLE
-
-	// x += y
-	vadd.u\n	X0, Y0
-	vadd.u\n	X1, Y1
-	vadd.u\n	X2, Y2
-	vadd.u\n	X3, Y3
-
-	// x ^= k
-	veor		X0, ROUND_KEY
-	veor		X1, ROUND_KEY
-	veor		X2, ROUND_KEY
-	veor		X3, ROUND_KEY
-
-	// y = rol(y, 3)
-	vshl.u\n	TMP0, Y0, #3
-	vshl.u\n	TMP1, Y1, #3
-	vshl.u\n	TMP2, Y2, #3
-	vshl.u\n	TMP3, Y3, #3
-	vsri.u\n	TMP0, Y0, #(\n - 3)
-	vsri.u\n	TMP1, Y1, #(\n - 3)
-	vsri.u\n	TMP2, Y2, #(\n - 3)
-	vsri.u\n	TMP3, Y3, #(\n - 3)
-
-	// y ^= x
-	veor		Y0, TMP0, X0
-	veor		Y1, TMP1, X1
-	veor		Y2, TMP2, X2
-	veor		Y3, TMP3, X3
-.endm
-
-/*
- * _speck_unround_128bytes() - Speck decryption round on 128 bytes at a time
- *
- * This is the inverse of _speck_round_128bytes().
- */
-.macro _speck_unround_128bytes	n
-
-	// y ^= x
-	veor		TMP0, Y0, X0
-	veor		TMP1, Y1, X1
-	veor		TMP2, Y2, X2
-	veor		TMP3, Y3, X3
-
-	// y = ror(y, 3)
-	vshr.u\n	Y0, TMP0, #3
-	vshr.u\n	Y1, TMP1, #3
-	vshr.u\n	Y2, TMP2, #3
-	vshr.u\n	Y3, TMP3, #3
-	vsli.u\n	Y0, TMP0, #(\n - 3)
-	vsli.u\n	Y1, TMP1, #(\n - 3)
-	vsli.u\n	Y2, TMP2, #(\n - 3)
-	vsli.u\n	Y3, TMP3, #(\n - 3)
-
-	// x ^= k
-	veor		X0, ROUND_KEY
-	veor		X1, ROUND_KEY
-	veor		X2, ROUND_KEY
-	veor		X3, ROUND_KEY
-
-	// x -= y
-	vsub.u\n	X0, Y0
-	vsub.u\n	X1, Y1
-	vsub.u\n	X2, Y2
-	vsub.u\n	X3, Y3
-
-	// x = rol(x, 8);
-	vtbl.8		X0_L, {X0_L}, ROTATE_TABLE
-	vtbl.8		X0_H, {X0_H}, ROTATE_TABLE
-	vtbl.8		X1_L, {X1_L}, ROTATE_TABLE
-	vtbl.8		X1_H, {X1_H}, ROTATE_TABLE
-	vtbl.8		X2_L, {X2_L}, ROTATE_TABLE
-	vtbl.8		X2_H, {X2_H}, ROTATE_TABLE
-	vtbl.8		X3_L, {X3_L}, ROTATE_TABLE
-	vtbl.8		X3_H, {X3_H}, ROTATE_TABLE
-.endm
-
-.macro _xts128_precrypt_one	dst_reg, tweak_buf, tmp
-
-	// Load the next source block
-	vld1.8		{\dst_reg}, [SRC]!
-
-	// Save the current tweak in the tweak buffer
-	vst1.8		{TWEAKV}, [\tweak_buf:128]!
-
-	// XOR the next source block with the current tweak
-	veor		\dst_reg, TWEAKV
-
-	/*
-	 * Calculate the next tweak by multiplying the current one by x,
-	 * modulo p(x) = x^128 + x^7 + x^2 + x + 1.
-	 */
-	vshr.u64	\tmp, TWEAKV, #63
-	vshl.u64	TWEAKV, #1
-	veor		TWEAKV_H, \tmp\()_L
-	vtbl.8		\tmp\()_H, {GF128MUL_TABLE}, \tmp\()_H
-	veor		TWEAKV_L, \tmp\()_H
-.endm
-
-.macro _xts64_precrypt_two	dst_reg, tweak_buf, tmp
-
-	// Load the next two source blocks
-	vld1.8		{\dst_reg}, [SRC]!
-
-	// Save the current two tweaks in the tweak buffer
-	vst1.8		{TWEAKV}, [\tweak_buf:128]!
-
-	// XOR the next two source blocks with the current two tweaks
-	veor		\dst_reg, TWEAKV
-
-	/*
-	 * Calculate the next two tweaks by multiplying the current ones by x^2,
-	 * modulo p(x) = x^64 + x^4 + x^3 + x + 1.
-	 */
-	vshr.u64	\tmp, TWEAKV, #62
-	vshl.u64	TWEAKV, #2
-	vtbl.8		\tmp\()_L, {GF64MUL_TABLE}, \tmp\()_L
-	vtbl.8		\tmp\()_H, {GF64MUL_TABLE}, \tmp\()_H
-	veor		TWEAKV, \tmp
-.endm
-
-/*
- * _speck_xts_crypt() - Speck-XTS encryption/decryption
- *
- * Encrypt or decrypt NBYTES bytes of data from the SRC buffer to the DST buffer
- * using Speck-XTS, specifically the variant with a block size of '2n' and round
- * count given by NROUNDS.  The expanded round keys are given in ROUND_KEYS, and
- * the current XTS tweak value is given in TWEAK.  It's assumed that NBYTES is a
- * nonzero multiple of 128.
- */
-.macro _speck_xts_crypt	n, decrypting
-	push		{r4-r7}
-	mov		r7, sp
-
-	/*
-	 * The first four parameters were passed in registers r0-r3.  Load the
-	 * additional parameters, which were passed on the stack.
-	 */
-	ldr		NBYTES, [sp, #16]
-	ldr		TWEAK, [sp, #20]
-
-	/*
-	 * If decrypting, modify the ROUND_KEYS parameter to point to the last
-	 * round key rather than the first, since for decryption the round keys
-	 * are used in reverse order.
-	 */
-.if \decrypting
-.if \n == 64
-	add		ROUND_KEYS, ROUND_KEYS, NROUNDS, lsl #3
-	sub		ROUND_KEYS, #8
-.else
-	add		ROUND_KEYS, ROUND_KEYS, NROUNDS, lsl #2
-	sub		ROUND_KEYS, #4
-.endif
-.endif
-
-	// Load the index vector for vtbl-based 8-bit rotates
-.if \decrypting
-	ldr		r12, =.Lrol\n\()_8_table
-.else
-	ldr		r12, =.Lror\n\()_8_table
-.endif
-	vld1.8		{ROTATE_TABLE}, [r12:64]
-
-	// One-time XTS preparation
-
-	/*
-	 * Allocate stack space to store 128 bytes worth of tweaks.  For
-	 * performance, this space is aligned to a 16-byte boundary so that we
-	 * can use the load/store instructions that declare 16-byte alignment.
-	 * For Thumb2 compatibility, don't do the 'bic' directly on 'sp'.
-	 */
-	sub		r12, sp, #128
-	bic		r12, #0xf
-	mov		sp, r12
-
-.if \n == 64
-	// Load first tweak
-	vld1.8		{TWEAKV}, [TWEAK]
-
-	// Load GF(2^128) multiplication table
-	ldr		r12, =.Lgf128mul_table
-	vld1.8		{GF128MUL_TABLE}, [r12:64]
-.else
-	// Load first tweak
-	vld1.8		{TWEAKV_L}, [TWEAK]
-
-	// Load GF(2^64) multiplication table
-	ldr		r12, =.Lgf64mul_table
-	vld1.8		{GF64MUL_TABLE}, [r12:64]
-
-	// Calculate second tweak, packing it together with the first
-	vshr.u64	TMP0_L, TWEAKV_L, #63
-	vtbl.u8		TMP0_L, {GF64MUL_TABLE}, TMP0_L
-	vshl.u64	TWEAKV_H, TWEAKV_L, #1
-	veor		TWEAKV_H, TMP0_L
-.endif
-
-.Lnext_128bytes_\@:
-
-	/*
-	 * Load the source blocks into {X,Y}[0-3], XOR them with their XTS tweak
-	 * values, and save the tweaks on the stack for later.  Then
-	 * de-interleave the 'x' and 'y' elements of each block, i.e. make it so
-	 * that the X[0-3] registers contain only the second halves of blocks,
-	 * and the Y[0-3] registers contain only the first halves of blocks.
-	 * (Speck uses the order (y, x) rather than the more intuitive (x, y).)
-	 */
-	mov		r12, sp
-.if \n == 64
-	_xts128_precrypt_one	X0, r12, TMP0
-	_xts128_precrypt_one	Y0, r12, TMP0
-	_xts128_precrypt_one	X1, r12, TMP0
-	_xts128_precrypt_one	Y1, r12, TMP0
-	_xts128_precrypt_one	X2, r12, TMP0
-	_xts128_precrypt_one	Y2, r12, TMP0
-	_xts128_precrypt_one	X3, r12, TMP0
-	_xts128_precrypt_one	Y3, r12, TMP0
-	vswp		X0_L, Y0_H
-	vswp		X1_L, Y1_H
-	vswp		X2_L, Y2_H
-	vswp		X3_L, Y3_H
-.else
-	_xts64_precrypt_two	X0, r12, TMP0
-	_xts64_precrypt_two	Y0, r12, TMP0
-	_xts64_precrypt_two	X1, r12, TMP0
-	_xts64_precrypt_two	Y1, r12, TMP0
-	_xts64_precrypt_two	X2, r12, TMP0
-	_xts64_precrypt_two	Y2, r12, TMP0
-	_xts64_precrypt_two	X3, r12, TMP0
-	_xts64_precrypt_two	Y3, r12, TMP0
-	vuzp.32		Y0, X0
-	vuzp.32		Y1, X1
-	vuzp.32		Y2, X2
-	vuzp.32		Y3, X3
-.endif
-
-	// Do the cipher rounds
-
-	mov		r12, ROUND_KEYS
-	mov		r6, NROUNDS
-
-.Lnext_round_\@:
-.if \decrypting
-.if \n == 64
-	vld1.64		ROUND_KEY_L, [r12]
-	sub		r12, #8
-	vmov		ROUND_KEY_H, ROUND_KEY_L
-.else
-	vld1.32		{ROUND_KEY_L[],ROUND_KEY_H[]}, [r12]
-	sub		r12, #4
-.endif
-	_speck_unround_128bytes	\n
-.else
-.if \n == 64
-	vld1.64		ROUND_KEY_L, [r12]!
-	vmov		ROUND_KEY_H, ROUND_KEY_L
-.else
-	vld1.32		{ROUND_KEY_L[],ROUND_KEY_H[]}, [r12]!
-.endif
-	_speck_round_128bytes	\n
-.endif
-	subs		r6, r6, #1
-	bne		.Lnext_round_\@
-
-	// Re-interleave the 'x' and 'y' elements of each block
-.if \n == 64
-	vswp		X0_L, Y0_H
-	vswp		X1_L, Y1_H
-	vswp		X2_L, Y2_H
-	vswp		X3_L, Y3_H
-.else
-	vzip.32		Y0, X0
-	vzip.32		Y1, X1
-	vzip.32		Y2, X2
-	vzip.32		Y3, X3
-.endif
-
-	// XOR the encrypted/decrypted blocks with the tweaks we saved earlier
-	mov		r12, sp
-	vld1.8		{TMP0, TMP1}, [r12:128]!
-	vld1.8		{TMP2, TMP3}, [r12:128]!
-	veor		X0, TMP0
-	veor		Y0, TMP1
-	veor		X1, TMP2
-	veor		Y1, TMP3
-	vld1.8		{TMP0, TMP1}, [r12:128]!
-	vld1.8		{TMP2, TMP3}, [r12:128]!
-	veor		X2, TMP0
-	veor		Y2, TMP1
-	veor		X3, TMP2
-	veor		Y3, TMP3
-
-	// Store the ciphertext in the destination buffer
-	vst1.8		{X0, Y0}, [DST]!
-	vst1.8		{X1, Y1}, [DST]!
-	vst1.8		{X2, Y2}, [DST]!
-	vst1.8		{X3, Y3}, [DST]!
-
-	// Continue if there are more 128-byte chunks remaining, else return
-	subs		NBYTES, #128
-	bne		.Lnext_128bytes_\@
-
-	// Store the next tweak
-.if \n == 64
-	vst1.8		{TWEAKV}, [TWEAK]
-.else
-	vst1.8		{TWEAKV_L}, [TWEAK]
-.endif
-
-	mov		sp, r7
-	pop		{r4-r7}
-	bx		lr
-.endm
-
-ENTRY(speck128_xts_encrypt_neon)
-	_speck_xts_crypt	n=64, decrypting=0
-ENDPROC(speck128_xts_encrypt_neon)
-
-ENTRY(speck128_xts_decrypt_neon)
-	_speck_xts_crypt	n=64, decrypting=1
-ENDPROC(speck128_xts_decrypt_neon)
-
-ENTRY(speck64_xts_encrypt_neon)
-	_speck_xts_crypt	n=32, decrypting=0
-ENDPROC(speck64_xts_encrypt_neon)
-
-ENTRY(speck64_xts_decrypt_neon)
-	_speck_xts_crypt	n=32, decrypting=1
-ENDPROC(speck64_xts_decrypt_neon)

arch/arm/crypto/speck-neon-glue.c

@@ -1,288 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * NEON-accelerated implementation of Speck128-XTS and Speck64-XTS
- *
- * Copyright (c) 2018 Google, Inc
- *
- * Note: the NIST recommendation for XTS only specifies a 128-bit block size,
- * but a 64-bit version (needed for Speck64) is fairly straightforward; the math
- * is just done in GF(2^64) instead of GF(2^128), with the reducing polynomial
- * x^64 + x^4 + x^3 + x + 1 from the original XEX paper (Rogaway, 2004:
- * "Efficient Instantiations of Tweakable Blockciphers and Refinements to Modes
- * OCB and PMAC"), represented as 0x1B.
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <crypto/algapi.h>
-#include <crypto/gf128mul.h>
-#include <crypto/internal/skcipher.h>
-#include <crypto/speck.h>
-#include <crypto/xts.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-/* The assembly functions only handle multiples of 128 bytes */
-#define SPECK_NEON_CHUNK_SIZE	128
-
-/* Speck128 */
-
-struct speck128_xts_tfm_ctx {
-	struct speck128_tfm_ctx main_key;
-	struct speck128_tfm_ctx tweak_key;
-};
-
-asmlinkage void speck128_xts_encrypt_neon(const u64 *round_keys, int nrounds,
-					  void *dst, const void *src,
-					  unsigned int nbytes, void *tweak);
-
-asmlinkage void speck128_xts_decrypt_neon(const u64 *round_keys, int nrounds,
-					  void *dst, const void *src,
-					  unsigned int nbytes, void *tweak);
-
-typedef void (*speck128_crypt_one_t)(const struct speck128_tfm_ctx *,
-				     u8 *, const u8 *);
-typedef void (*speck128_xts_crypt_many_t)(const u64 *, int, void *,
-					  const void *, unsigned int, void *);
-
-static __always_inline int
-__speck128_xts_crypt(struct skcipher_request *req,
-		     speck128_crypt_one_t crypt_one,
-		     speck128_xts_crypt_many_t crypt_many)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	const struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	le128 tweak;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, true);
-
-	crypto_speck128_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-		u8 *dst = walk.dst.virt.addr;
-		const u8 *src = walk.src.virt.addr;
-
-		if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) {
-			unsigned int count;
-
-			count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE);
-			kernel_neon_begin();
-			(*crypt_many)(ctx->main_key.round_keys,
-				      ctx->main_key.nrounds,
-				      dst, src, count, &tweak);
-			kernel_neon_end();
-			dst += count;
-			src += count;
-			nbytes -= count;
-		}
-
-		/* Handle any remainder with generic code */
-		while (nbytes >= sizeof(tweak)) {
-			le128_xor((le128 *)dst, (const le128 *)src, &tweak);
-			(*crypt_one)(&ctx->main_key, dst, dst);
-			le128_xor((le128 *)dst, (const le128 *)dst, &tweak);
-			gf128mul_x_ble(&tweak, &tweak);
-
-			dst += sizeof(tweak);
-			src += sizeof(tweak);
-			nbytes -= sizeof(tweak);
-		}
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int speck128_xts_encrypt(struct skcipher_request *req)
-{
-	return __speck128_xts_crypt(req, crypto_speck128_encrypt,
-				    speck128_xts_encrypt_neon);
-}
-
-static int speck128_xts_decrypt(struct skcipher_request *req)
-{
-	return __speck128_xts_crypt(req, crypto_speck128_decrypt,
-				    speck128_xts_decrypt_neon);
-}
-
-static int speck128_xts_setkey(struct crypto_skcipher *tfm, const u8 *key,
-			       unsigned int keylen)
-{
-	struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	int err;
-
-	err = xts_verify_key(tfm, key, keylen);
-	if (err)
-		return err;
-
-	keylen /= 2;
-
-	err = crypto_speck128_setkey(&ctx->main_key, key, keylen);
-	if (err)
-		return err;
-
-	return crypto_speck128_setkey(&ctx->tweak_key, key + keylen, keylen);
-}
-
-/* Speck64 */
-
-struct speck64_xts_tfm_ctx {
-	struct speck64_tfm_ctx main_key;
-	struct speck64_tfm_ctx tweak_key;
-};
-
-asmlinkage void speck64_xts_encrypt_neon(const u32 *round_keys, int nrounds,
-					 void *dst, const void *src,
-					 unsigned int nbytes, void *tweak);
-
-asmlinkage void speck64_xts_decrypt_neon(const u32 *round_keys, int nrounds,
-					 void *dst, const void *src,
-					 unsigned int nbytes, void *tweak);
-
-typedef void (*speck64_crypt_one_t)(const struct speck64_tfm_ctx *,
-				    u8 *, const u8 *);
-typedef void (*speck64_xts_crypt_many_t)(const u32 *, int, void *,
-					 const void *, unsigned int, void *);
-
-static __always_inline int
-__speck64_xts_crypt(struct skcipher_request *req, speck64_crypt_one_t crypt_one,
-		    speck64_xts_crypt_many_t crypt_many)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	const struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	__le64 tweak;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, true);
-
-	crypto_speck64_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-		u8 *dst = walk.dst.virt.addr;
-		const u8 *src = walk.src.virt.addr;
-
-		if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) {
-			unsigned int count;
-
-			count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE);
-			kernel_neon_begin();
-			(*crypt_many)(ctx->main_key.round_keys,
-				      ctx->main_key.nrounds,
-				      dst, src, count, &tweak);
-			kernel_neon_end();
-			dst += count;
-			src += count;
-			nbytes -= count;
-		}
-
-		/* Handle any remainder with generic code */
-		while (nbytes >= sizeof(tweak)) {
-			*(__le64 *)dst = *(__le64 *)src ^ tweak;
-			(*crypt_one)(&ctx->main_key, dst, dst);
-			*(__le64 *)dst ^= tweak;
-			tweak = cpu_to_le64((le64_to_cpu(tweak) << 1) ^
-					    ((tweak & cpu_to_le64(1ULL << 63)) ?
-					     0x1B : 0));
-			dst += sizeof(tweak);
-			src += sizeof(tweak);
-			nbytes -= sizeof(tweak);
-		}
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int speck64_xts_encrypt(struct skcipher_request *req)
-{
-	return __speck64_xts_crypt(req, crypto_speck64_encrypt,
-				   speck64_xts_encrypt_neon);
-}
-
-static int speck64_xts_decrypt(struct skcipher_request *req)
-{
-	return __speck64_xts_crypt(req, crypto_speck64_decrypt,
-				   speck64_xts_decrypt_neon);
-}
-
-static int speck64_xts_setkey(struct crypto_skcipher *tfm, const u8 *key,
-			      unsigned int keylen)
-{
-	struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	int err;
-
-	err = xts_verify_key(tfm, key, keylen);
-	if (err)
-		return err;
-
-	keylen /= 2;
-
-	err = crypto_speck64_setkey(&ctx->main_key, key, keylen);
-	if (err)
-		return err;
-
-	return crypto_speck64_setkey(&ctx->tweak_key, key + keylen, keylen);
-}
-
-static struct skcipher_alg speck_algs[] = {
-	{
-		.base.cra_name		= "xts(speck128)",
-		.base.cra_driver_name	= "xts-speck128-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= SPECK128_BLOCK_SIZE,
-		.base.cra_ctxsize	= sizeof(struct speck128_xts_tfm_ctx),
-		.base.cra_alignmask	= 7,
-		.base.cra_module	= THIS_MODULE,
-		.min_keysize		= 2 * SPECK128_128_KEY_SIZE,
-		.max_keysize		= 2 * SPECK128_256_KEY_SIZE,
-		.ivsize			= SPECK128_BLOCK_SIZE,
-		.walksize		= SPECK_NEON_CHUNK_SIZE,
-		.setkey			= speck128_xts_setkey,
-		.encrypt		= speck128_xts_encrypt,
-		.decrypt		= speck128_xts_decrypt,
-	}, {
-		.base.cra_name		= "xts(speck64)",
-		.base.cra_driver_name	= "xts-speck64-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= SPECK64_BLOCK_SIZE,
-		.base.cra_ctxsize	= sizeof(struct speck64_xts_tfm_ctx),
-		.base.cra_alignmask	= 7,
-		.base.cra_module	= THIS_MODULE,
-		.min_keysize		= 2 * SPECK64_96_KEY_SIZE,
-		.max_keysize		= 2 * SPECK64_128_KEY_SIZE,
-		.ivsize			= SPECK64_BLOCK_SIZE,
-		.walksize		= SPECK_NEON_CHUNK_SIZE,
-		.setkey			= speck64_xts_setkey,
-		.encrypt		= speck64_xts_encrypt,
-		.decrypt		= speck64_xts_decrypt,
-	}
-};
-
-static int __init speck_neon_module_init(void)
-{
-	if (!(elf_hwcap & HWCAP_NEON))
-		return -ENODEV;
-	return crypto_register_skciphers(speck_algs, ARRAY_SIZE(speck_algs));
-}
-
-static void __exit speck_neon_module_exit(void)
-{
-	crypto_unregister_skciphers(speck_algs, ARRAY_SIZE(speck_algs));
-}
-
-module_init(speck_neon_module_init);
-module_exit(speck_neon_module_exit);
-
-MODULE_DESCRIPTION("Speck block cipher (NEON-accelerated)");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
-MODULE_ALIAS_CRYPTO("xts(speck128)");
-MODULE_ALIAS_CRYPTO("xts-speck128-neon");
-MODULE_ALIAS_CRYPTO("xts(speck64)");
-MODULE_ALIAS_CRYPTO("xts-speck64-neon");

arch/arm/mm/proc-v7.S

@@ -112,7 +112,7 @@ ENTRY(cpu_v7_hvc_switch_mm)
 	hvc	#0
 	ldmfd	sp!, {r0 - r3}
 	b	cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+ENDPROC(cpu_v7_hvc_switch_mm)
 #endif
 ENTRY(cpu_v7_iciallu_switch_mm)
 	mov	r3, #0

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -137,6 +137,9 @@
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
 			clock-names = "stmmaceth";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
 			status = "disabled";
 		};
 
@@ -150,6 +153,9 @@
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
 			clock-names = "stmmaceth";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
 			status = "disabled";
 		};
 
@@ -163,6 +169,9 @@
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
 			clock-names = "stmmaceth";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
 			status = "disabled";
 		};
 
@@ -335,7 +344,7 @@
 
 		sysmgr: sysmgr@ffd12000 {
 			compatible = "altr,sys-mgr", "syscon";
-			reg = <0xffd12000 0x1000>;
+			reg = <0xffd12000 0x228>;
 		};
 
 		/* Local timer */

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts

@@ -76,7 +76,7 @@
 	phy-mode = "rgmii";
 	phy-handle = <&phy0>;
 
-	max-frame-size = <3800>;
+	max-frame-size = <9000>;
 
 	mdio0 {
 		#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a7795.dtsi

@@ -662,7 +662,7 @@
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
 			       <&dmac2 0x35>, <&dmac2 0x34>;
-			dma-names = "tx", "rx";
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 518>;
 			status = "disabled";

arch/arm64/boot/dts/renesas/r8a77980-condor.dts

@@ -15,7 +15,7 @@
 
 	aliases {
 		serial0 = &scif0;
-		ethernet0 = &avb;
+		ethernet0 = &gether;
 	};
 
 	chosen {
@@ -47,23 +47,6 @@
 	};
 };
 
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy0>;
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
 &canfd {
 	pinctrl-0 = <&canfd0_pins>;
 	pinctrl-names = "default";
@@ -82,6 +65,23 @@
 	clock-frequency = <32768>;
 };
 
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@@ -118,16 +118,17 @@
 };
 
 &pfc {
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_rgmii";
-		function = "avb";
-	};
-
 	canfd0_pins: canfd0 {
 		groups = "canfd0_data_a";
 		function = "canfd0";
 	};
 
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
 	i2c0_pins: i2c0 {
 		groups = "i2c0";
 		function = "i2c0";

arch/arm64/crypto/Kconfig

@@ -119,10 +119,4 @@ config CRYPTO_AES_ARM64_BS
 	select CRYPTO_AES_ARM64
 	select CRYPTO_SIMD
 
-config CRYPTO_SPECK_NEON
-	tristate "NEON accelerated Speck cipher algorithms"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_BLKCIPHER
-	select CRYPTO_SPECK
-
 endif

arch/arm64/crypto/Makefile

@@ -56,9 +56,6 @@ sha512-arm64-y := sha512-glue.o sha512-core.o
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o
 chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
 
-obj-$(CONFIG_CRYPTO_SPECK_NEON) += speck-neon.o
-speck-neon-y := speck-neon-core.o speck-neon-glue.o
-
 obj-$(CONFIG_CRYPTO_AES_ARM64) += aes-arm64.o
 aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o
 

arch/arm64/crypto/speck-neon-core.S

@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM64 NEON-accelerated implementation of Speck128-XTS and Speck64-XTS
- *
- * Copyright (c) 2018 Google, Inc
- *
- * Author: Eric Biggers <ebiggers@google.com>
- */
-
-#include <linux/linkage.h>
-
-	.text
-
-	// arguments
-	ROUND_KEYS	.req	x0	// const {u64,u32} *round_keys
-	NROUNDS		.req	w1	// int nrounds
-	NROUNDS_X	.req	x1
-	DST		.req	x2	// void *dst
-	SRC		.req	x3	// const void *src
-	NBYTES		.req	w4	// unsigned int nbytes
-	TWEAK		.req	x5	// void *tweak
-
-	// registers which hold the data being encrypted/decrypted
-	// (underscores avoid a naming collision with ARM64 registers x0-x3)
-	X_0		.req	v0
-	Y_0		.req	v1
-	X_1		.req	v2
-	Y_1		.req	v3
-	X_2		.req	v4
-	Y_2		.req	v5
-	X_3		.req	v6
-	Y_3		.req	v7
-
-	// the round key, duplicated in all lanes
-	ROUND_KEY	.req	v8
-
-	// index vector for tbl-based 8-bit rotates
-	ROTATE_TABLE	.req	v9
-	ROTATE_TABLE_Q	.req	q9
-
-	// temporary registers
-	TMP0		.req	v10
-	TMP1		.req	v11
-	TMP2		.req	v12
-	TMP3		.req	v13
-
-	// multiplication table for updating XTS tweaks
-	GFMUL_TABLE	.req	v14
-	GFMUL_TABLE_Q	.req	q14
-
-	// next XTS tweak value(s)
-	TWEAKV_NEXT	.req	v15
-
-	// XTS tweaks for the blocks currently being encrypted/decrypted
-	TWEAKV0		.req	v16
-	TWEAKV1		.req	v17
-	TWEAKV2		.req	v18
-	TWEAKV3		.req	v19
-	TWEAKV4		.req	v20
-	TWEAKV5		.req	v21
-	TWEAKV6		.req	v22
-	TWEAKV7		.req	v23
-
-	.align		4
-.Lror64_8_table:
-	.octa		0x080f0e0d0c0b0a090007060504030201
-.Lror32_8_table:
-	.octa		0x0c0f0e0d080b0a090407060500030201
-.Lrol64_8_table:
-	.octa		0x0e0d0c0b0a09080f0605040302010007
-.Lrol32_8_table:
-	.octa		0x0e0d0c0f0a09080b0605040702010003
-.Lgf128mul_table:
-	.octa		0x00000000000000870000000000000001
-.Lgf64mul_table:
-	.octa		0x0000000000000000000000002d361b00
-
-/*
- * _speck_round_128bytes() - Speck encryption round on 128 bytes at a time
- *
- * Do one Speck encryption round on the 128 bytes (8 blocks for Speck128, 16 for
- * Speck64) stored in X0-X3 and Y0-Y3, using the round key stored in all lanes
- * of ROUND_KEY.  'n' is the lane size: 64 for Speck128, or 32 for Speck64.
- * 'lanes' is the lane specifier: "2d" for Speck128 or "4s" for Speck64.
- */
-.macro _speck_round_128bytes	n, lanes
-
-	// x = ror(x, 8)
-	tbl		X_0.16b, {X_0.16b}, ROTATE_TABLE.16b
-	tbl		X_1.16b, {X_1.16b}, ROTATE_TABLE.16b
-	tbl		X_2.16b, {X_2.16b}, ROTATE_TABLE.16b
-	tbl		X_3.16b, {X_3.16b}, ROTATE_TABLE.16b
-
-	// x += y
-	add		X_0.\lanes, X_0.\lanes, Y_0.\lanes
-	add		X_1.\lanes, X_1.\lanes, Y_1.\lanes
-	add		X_2.\lanes, X_2.\lanes, Y_2.\lanes
-	add		X_3.\lanes, X_3.\lanes, Y_3.\lanes
-
-	// x ^= k
-	eor		X_0.16b, X_0.16b, ROUND_KEY.16b
-	eor		X_1.16b, X_1.16b, ROUND_KEY.16b
-	eor		X_2.16b, X_2.16b, ROUND_KEY.16b
-	eor		X_3.16b, X_3.16b, ROUND_KEY.16b
-
-	// y = rol(y, 3)
-	shl		TMP0.\lanes, Y_0.\lanes, #3
-	shl		TMP1.\lanes, Y_1.\lanes, #3
-	shl		TMP2.\lanes, Y_2.\lanes, #3
-	shl		TMP3.\lanes, Y_3.\lanes, #3
-	sri		TMP0.\lanes, Y_0.\lanes, #(\n - 3)
-	sri		TMP1.\lanes, Y_1.\lanes, #(\n - 3)
-	sri		TMP2.\lanes, Y_2.\lanes, #(\n - 3)
-	sri		TMP3.\lanes, Y_3.\lanes, #(\n - 3)
-
-	// y ^= x
-	eor		Y_0.16b, TMP0.16b, X_0.16b
-	eor		Y_1.16b, TMP1.16b, X_1.16b
-	eor		Y_2.16b, TMP2.16b, X_2.16b
-	eor		Y_3.16b, TMP3.16b, X_3.16b
-.endm
-
-/*
- * _speck_unround_128bytes() - Speck decryption round on 128 bytes at a time
- *
- * This is the inverse of _speck_round_128bytes().
- */
-.macro _speck_unround_128bytes	n, lanes
-
-	// y ^= x
-	eor		TMP0.16b, Y_0.16b, X_0.16b
-	eor		TMP1.16b, Y_1.16b, X_1.16b
-	eor		TMP2.16b, Y_2.16b, X_2.16b
-	eor		TMP3.16b, Y_3.16b, X_3.16b
-
-	// y = ror(y, 3)
-	ushr		Y_0.\lanes, TMP0.\lanes, #3
-	ushr		Y_1.\lanes, TMP1.\lanes, #3
-	ushr		Y_2.\lanes, TMP2.\lanes, #3
-	ushr		Y_3.\lanes, TMP3.\lanes, #3
-	sli		Y_0.\lanes, TMP0.\lanes, #(\n - 3)
-	sli		Y_1.\lanes, TMP1.\lanes, #(\n - 3)
-	sli		Y_2.\lanes, TMP2.\lanes, #(\n - 3)
-	sli		Y_3.\lanes, TMP3.\lanes, #(\n - 3)
-
-	// x ^= k
-	eor		X_0.16b, X_0.16b, ROUND_KEY.16b
-	eor		X_1.16b, X_1.16b, ROUND_KEY.16b
-	eor		X_2.16b, X_2.16b, ROUND_KEY.16b
-	eor		X_3.16b, X_3.16b, ROUND_KEY.16b
-
-	// x -= y
-	sub		X_0.\lanes, X_0.\lanes, Y_0.\lanes
-	sub		X_1.\lanes, X_1.\lanes, Y_1.\lanes
-	sub		X_2.\lanes, X_2.\lanes, Y_2.\lanes
-	sub		X_3.\lanes, X_3.\lanes, Y_3.\lanes
-
-	// x = rol(x, 8)
-	tbl		X_0.16b, {X_0.16b}, ROTATE_TABLE.16b
-	tbl		X_1.16b, {X_1.16b}, ROTATE_TABLE.16b
-	tbl		X_2.16b, {X_2.16b}, ROTATE_TABLE.16b
-	tbl		X_3.16b, {X_3.16b}, ROTATE_TABLE.16b
-.endm
-
-.macro _next_xts_tweak	next, cur, tmp, n
-.if \n == 64
-	/*
-	 * Calculate the next tweak by multiplying the current one by x,
-	 * modulo p(x) = x^128 + x^7 + x^2 + x + 1.
-	 */
-	sshr		\tmp\().2d, \cur\().2d, #63
-	and		\tmp\().16b, \tmp\().16b, GFMUL_TABLE.16b
-	shl		\next\().2d, \cur\().2d, #1
-	ext		\tmp\().16b, \tmp\().16b, \tmp\().16b, #8
-	eor		\next\().16b, \next\().16b, \tmp\().16b
-.else
-	/*
-	 * Calculate the next two tweaks by multiplying the current ones by x^2,
-	 * modulo p(x) = x^64 + x^4 + x^3 + x + 1.
-	 */
-	ushr		\tmp\().2d, \cur\().2d, #62
-	shl		\next\().2d, \cur\().2d, #2
-	tbl		\tmp\().16b, {GFMUL_TABLE.16b}, \tmp\().16b
-	eor		\next\().16b, \next\().16b, \tmp\().16b
-.endif
-.endm
-
-/*
- * _speck_xts_crypt() - Speck-XTS encryption/decryption
- *
- * Encrypt or decrypt NBYTES bytes of data from the SRC buffer to the DST buffer
- * using Speck-XTS, specifically the variant with a block size of '2n' and round
- * count given by NROUNDS.  The expanded round keys are given in ROUND_KEYS, and
- * the current XTS tweak value is given in TWEAK.  It's assumed that NBYTES is a
- * nonzero multiple of 128.
- */
-.macro _speck_xts_crypt	n, lanes, decrypting
-
-	/*
-	 * If decrypting, modify the ROUND_KEYS parameter to point to the last
-	 * round key rather than the first, since for decryption the round keys
-	 * are used in reverse order.
-	 */
-.if \decrypting
-	mov		NROUNDS, NROUNDS	/* zero the high 32 bits */
-.if \n == 64
-	add		ROUND_KEYS, ROUND_KEYS, NROUNDS_X, lsl #3
-	sub		ROUND_KEYS, ROUND_KEYS, #8
-.else
-	add		ROUND_KEYS, ROUND_KEYS, NROUNDS_X, lsl #2
-	sub		ROUND_KEYS, ROUND_KEYS, #4
-.endif
-.endif
-
-	// Load the index vector for tbl-based 8-bit rotates
-.if \decrypting
-	ldr		ROTATE_TABLE_Q, .Lrol\n\()_8_table
-.else
-	ldr		ROTATE_TABLE_Q, .Lror\n\()_8_table
-.endif
-
-	// One-time XTS preparation
-.if \n == 64
-	// Load first tweak
-	ld1		{TWEAKV0.16b}, [TWEAK]
-
-	// Load GF(2^128) multiplication table
-	ldr		GFMUL_TABLE_Q, .Lgf128mul_table
-.else
-	// Load first tweak
-	ld1		{TWEAKV0.8b}, [TWEAK]
-
-	// Load GF(2^64) multiplication table
-	ldr		GFMUL_TABLE_Q, .Lgf64mul_table
-
-	// Calculate second tweak, packing it together with the first
-	ushr		TMP0.2d, TWEAKV0.2d, #63
-	shl		TMP1.2d, TWEAKV0.2d, #1
-	tbl		TMP0.8b, {GFMUL_TABLE.16b}, TMP0.8b
-	eor		TMP0.8b, TMP0.8b, TMP1.8b
-	mov		TWEAKV0.d[1], TMP0.d[0]
-.endif
-
-.Lnext_128bytes_\@:
-
-	// Calculate XTS tweaks for next 128 bytes
-	_next_xts_tweak	TWEAKV1, TWEAKV0, TMP0, \n
-	_next_xts_tweak	TWEAKV2, TWEAKV1, TMP0, \n
-	_next_xts_tweak	TWEAKV3, TWEAKV2, TMP0, \n
-	_next_xts_tweak	TWEAKV4, TWEAKV3, TMP0, \n
-	_next_xts_tweak	TWEAKV5, TWEAKV4, TMP0, \n
-	_next_xts_tweak	TWEAKV6, TWEAKV5, TMP0, \n
-	_next_xts_tweak	TWEAKV7, TWEAKV6, TMP0, \n
-	_next_xts_tweak	TWEAKV_NEXT, TWEAKV7, TMP0, \n
-
-	// Load the next source blocks into {X,Y}[0-3]
-	ld1		{X_0.16b-Y_1.16b}, [SRC], #64
-	ld1		{X_2.16b-Y_3.16b}, [SRC], #64
-
-	// XOR the source blocks with their XTS tweaks
-	eor		TMP0.16b, X_0.16b, TWEAKV0.16b
-	eor		Y_0.16b,  Y_0.16b, TWEAKV1.16b
-	eor		TMP1.16b, X_1.16b, TWEAKV2.16b
-	eor		Y_1.16b,  Y_1.16b, TWEAKV3.16b
-	eor		TMP2.16b, X_2.16b, TWEAKV4.16b
-	eor		Y_2.16b,  Y_2.16b, TWEAKV5.16b
-	eor		TMP3.16b, X_3.16b, TWEAKV6.16b
-	eor		Y_3.16b,  Y_3.16b, TWEAKV7.16b
-
-	/*
-	 * De-interleave the 'x' and 'y' elements of each block, i.e. make it so
-	 * that the X[0-3] registers contain only the second halves of blocks,
-	 * and the Y[0-3] registers contain only the first halves of blocks.
-	 * (Speck uses the order (y, x) rather than the more intuitive (x, y).)
-	 */
-	uzp2		X_0.\lanes, TMP0.\lanes, Y_0.\lanes
-	uzp1		Y_0.\lanes, TMP0.\lanes, Y_0.\lanes
-	uzp2		X_1.\lanes, TMP1.\lanes, Y_1.\lanes
-	uzp1		Y_1.\lanes, TMP1.\lanes, Y_1.\lanes
-	uzp2		X_2.\lanes, TMP2.\lanes, Y_2.\lanes
-	uzp1		Y_2.\lanes, TMP2.\lanes, Y_2.\lanes
-	uzp2		X_3.\lanes, TMP3.\lanes, Y_3.\lanes
-	uzp1		Y_3.\lanes, TMP3.\lanes, Y_3.\lanes
-
-	// Do the cipher rounds
-	mov		x6, ROUND_KEYS
-	mov		w7, NROUNDS
-.Lnext_round_\@:
-.if \decrypting
-	ld1r		{ROUND_KEY.\lanes}, [x6]
-	sub		x6, x6, #( \n / 8 )
-	_speck_unround_128bytes	\n, \lanes
-.else
-	ld1r		{ROUND_KEY.\lanes}, [x6], #( \n / 8 )
-	_speck_round_128bytes	\n, \lanes
-.endif
-	subs		w7, w7, #1
-	bne		.Lnext_round_\@
-
-	// Re-interleave the 'x' and 'y' elements of each block
-	zip1		TMP0.\lanes, Y_0.\lanes, X_0.\lanes
-	zip2		Y_0.\lanes,  Y_0.\lanes, X_0.\lanes
-	zip1		TMP1.\lanes, Y_1.\lanes, X_1.\lanes
-	zip2		Y_1.\lanes,  Y_1.\lanes, X_1.\lanes
-	zip1		TMP2.\lanes, Y_2.\lanes, X_2.\lanes
-	zip2		Y_2.\lanes,  Y_2.\lanes, X_2.\lanes
-	zip1		TMP3.\lanes, Y_3.\lanes, X_3.\lanes
-	zip2		Y_3.\lanes,  Y_3.\lanes, X_3.\lanes
-
-	// XOR the encrypted/decrypted blocks with the tweaks calculated earlier
-	eor		X_0.16b, TMP0.16b, TWEAKV0.16b
-	eor		Y_0.16b, Y_0.16b,  TWEAKV1.16b
-	eor		X_1.16b, TMP1.16b, TWEAKV2.16b
-	eor		Y_1.16b, Y_1.16b,  TWEAKV3.16b
-	eor		X_2.16b, TMP2.16b, TWEAKV4.16b
-	eor		Y_2.16b, Y_2.16b,  TWEAKV5.16b
-	eor		X_3.16b, TMP3.16b, TWEAKV6.16b
-	eor		Y_3.16b, Y_3.16b,  TWEAKV7.16b
-	mov		TWEAKV0.16b, TWEAKV_NEXT.16b
-
-	// Store the ciphertext in the destination buffer
-	st1		{X_0.16b-Y_1.16b}, [DST], #64
-	st1		{X_2.16b-Y_3.16b}, [DST], #64
-
-	// Continue if there are more 128-byte chunks remaining
-	subs		NBYTES, NBYTES, #128
-	bne		.Lnext_128bytes_\@
-
-	// Store the next tweak and return
-.if \n == 64
-	st1		{TWEAKV_NEXT.16b}, [TWEAK]
-.else
-	st1		{TWEAKV_NEXT.8b}, [TWEAK]
-.endif
-	ret
-.endm
-
-ENTRY(speck128_xts_encrypt_neon)
-	_speck_xts_crypt	n=64, lanes=2d, decrypting=0
-ENDPROC(speck128_xts_encrypt_neon)
-
-ENTRY(speck128_xts_decrypt_neon)
-	_speck_xts_crypt	n=64, lanes=2d, decrypting=1
-ENDPROC(speck128_xts_decrypt_neon)
-
-ENTRY(speck64_xts_encrypt_neon)
-	_speck_xts_crypt	n=32, lanes=4s, decrypting=0
-ENDPROC(speck64_xts_encrypt_neon)
-
-ENTRY(speck64_xts_decrypt_neon)
-	_speck_xts_crypt	n=32, lanes=4s, decrypting=1
-ENDPROC(speck64_xts_decrypt_neon)

arch/arm64/crypto/speck-neon-glue.c

@@ -1,282 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * NEON-accelerated implementation of Speck128-XTS and Speck64-XTS
- * (64-bit version; based on the 32-bit version)
- *
- * Copyright (c) 2018 Google, Inc
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <crypto/algapi.h>
-#include <crypto/gf128mul.h>
-#include <crypto/internal/skcipher.h>
-#include <crypto/speck.h>
-#include <crypto/xts.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-/* The assembly functions only handle multiples of 128 bytes */
-#define SPECK_NEON_CHUNK_SIZE	128
-
-/* Speck128 */
-
-struct speck128_xts_tfm_ctx {
-	struct speck128_tfm_ctx main_key;
-	struct speck128_tfm_ctx tweak_key;
-};
-
-asmlinkage void speck128_xts_encrypt_neon(const u64 *round_keys, int nrounds,
-					  void *dst, const void *src,
-					  unsigned int nbytes, void *tweak);
-
-asmlinkage void speck128_xts_decrypt_neon(const u64 *round_keys, int nrounds,
-					  void *dst, const void *src,
-					  unsigned int nbytes, void *tweak);
-
-typedef void (*speck128_crypt_one_t)(const struct speck128_tfm_ctx *,
-				     u8 *, const u8 *);
-typedef void (*speck128_xts_crypt_many_t)(const u64 *, int, void *,
-					  const void *, unsigned int, void *);
-
-static __always_inline int
-__speck128_xts_crypt(struct skcipher_request *req,
-		     speck128_crypt_one_t crypt_one,
-		     speck128_xts_crypt_many_t crypt_many)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	const struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	le128 tweak;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, true);
-
-	crypto_speck128_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-		u8 *dst = walk.dst.virt.addr;
-		const u8 *src = walk.src.virt.addr;
-
-		if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) {
-			unsigned int count;
-
-			count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE);
-			kernel_neon_begin();
-			(*crypt_many)(ctx->main_key.round_keys,
-				      ctx->main_key.nrounds,
-				      dst, src, count, &tweak);
-			kernel_neon_end();
-			dst += count;
-			src += count;
-			nbytes -= count;
-		}
-
-		/* Handle any remainder with generic code */
-		while (nbytes >= sizeof(tweak)) {
-			le128_xor((le128 *)dst, (const le128 *)src, &tweak);
-			(*crypt_one)(&ctx->main_key, dst, dst);
-			le128_xor((le128 *)dst, (const le128 *)dst, &tweak);
-			gf128mul_x_ble(&tweak, &tweak);
-
-			dst += sizeof(tweak);
-			src += sizeof(tweak);
-			nbytes -= sizeof(tweak);
-		}
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int speck128_xts_encrypt(struct skcipher_request *req)
-{
-	return __speck128_xts_crypt(req, crypto_speck128_encrypt,
-				    speck128_xts_encrypt_neon);
-}
-
-static int speck128_xts_decrypt(struct skcipher_request *req)
-{
-	return __speck128_xts_crypt(req, crypto_speck128_decrypt,
-				    speck128_xts_decrypt_neon);
-}
-
-static int speck128_xts_setkey(struct crypto_skcipher *tfm, const u8 *key,
-			       unsigned int keylen)
-{
-	struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	int err;
-
-	err = xts_verify_key(tfm, key, keylen);
-	if (err)
-		return err;
-
-	keylen /= 2;
-
-	err = crypto_speck128_setkey(&ctx->main_key, key, keylen);
-	if (err)
-		return err;
-
-	return crypto_speck128_setkey(&ctx->tweak_key, key + keylen, keylen);
-}
-
-/* Speck64 */
-
-struct speck64_xts_tfm_ctx {
-	struct speck64_tfm_ctx main_key;
-	struct speck64_tfm_ctx tweak_key;
-};
-
-asmlinkage void speck64_xts_encrypt_neon(const u32 *round_keys, int nrounds,
-					 void *dst, const void *src,
-					 unsigned int nbytes, void *tweak);
-
-asmlinkage void speck64_xts_decrypt_neon(const u32 *round_keys, int nrounds,
-					 void *dst, const void *src,
-					 unsigned int nbytes, void *tweak);
-
-typedef void (*speck64_crypt_one_t)(const struct speck64_tfm_ctx *,
-				    u8 *, const u8 *);
-typedef void (*speck64_xts_crypt_many_t)(const u32 *, int, void *,
-					 const void *, unsigned int, void *);
-
-static __always_inline int
-__speck64_xts_crypt(struct skcipher_request *req, speck64_crypt_one_t crypt_one,
-		    speck64_xts_crypt_many_t crypt_many)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	const struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	__le64 tweak;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, true);
-
-	crypto_speck64_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-		u8 *dst = walk.dst.virt.addr;
-		const u8 *src = walk.src.virt.addr;
-
-		if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) {
-			unsigned int count;
-
-			count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE);
-			kernel_neon_begin();
-			(*crypt_many)(ctx->main_key.round_keys,
-				      ctx->main_key.nrounds,
-				      dst, src, count, &tweak);
-			kernel_neon_end();
-			dst += count;
-			src += count;
-			nbytes -= count;
-		}
-
-		/* Handle any remainder with generic code */
-		while (nbytes >= sizeof(tweak)) {
-			*(__le64 *)dst = *(__le64 *)src ^ tweak;
-			(*crypt_one)(&ctx->main_key, dst, dst);
-			*(__le64 *)dst ^= tweak;
-			tweak = cpu_to_le64((le64_to_cpu(tweak) << 1) ^
-					    ((tweak & cpu_to_le64(1ULL << 63)) ?
-					     0x1B : 0));
-			dst += sizeof(tweak);
-			src += sizeof(tweak);
-			nbytes -= sizeof(tweak);
-		}
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int speck64_xts_encrypt(struct skcipher_request *req)
-{
-	return __speck64_xts_crypt(req, crypto_speck64_encrypt,
-				   speck64_xts_encrypt_neon);
-}
-
-static int speck64_xts_decrypt(struct skcipher_request *req)
-{
-	return __speck64_xts_crypt(req, crypto_speck64_decrypt,
-				   speck64_xts_decrypt_neon);
-}
-
-static int speck64_xts_setkey(struct crypto_skcipher *tfm, const u8 *key,
-			      unsigned int keylen)
-{
-	struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm);
-	int err;
-
-	err = xts_verify_key(tfm, key, keylen);
-	if (err)
-		return err;
-
-	keylen /= 2;
-
-	err = crypto_speck64_setkey(&ctx->main_key, key, keylen);
-	if (err)
-		return err;
-
-	return crypto_speck64_setkey(&ctx->tweak_key, key + keylen, keylen);
-}
-
-static struct skcipher_alg speck_algs[] = {
-	{
-		.base.cra_name		= "xts(speck128)",
-		.base.cra_driver_name	= "xts-speck128-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= SPECK128_BLOCK_SIZE,
-		.base.cra_ctxsize	= sizeof(struct speck128_xts_tfm_ctx),
-		.base.cra_alignmask	= 7,
-		.base.cra_module	= THIS_MODULE,
-		.min_keysize		= 2 * SPECK128_128_KEY_SIZE,
-		.max_keysize		= 2 * SPECK128_256_KEY_SIZE,
-		.ivsize			= SPECK128_BLOCK_SIZE,
-		.walksize		= SPECK_NEON_CHUNK_SIZE,
-		.setkey			= speck128_xts_setkey,
-		.encrypt		= speck128_xts_encrypt,
-		.decrypt		= speck128_xts_decrypt,
-	}, {
-		.base.cra_name		= "xts(speck64)",
-		.base.cra_driver_name	= "xts-speck64-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= SPECK64_BLOCK_SIZE,
-		.base.cra_ctxsize	= sizeof(struct speck64_xts_tfm_ctx),
-		.base.cra_alignmask	= 7,
-		.base.cra_module	= THIS_MODULE,
-		.min_keysize		= 2 * SPECK64_96_KEY_SIZE,
-		.max_keysize		= 2 * SPECK64_128_KEY_SIZE,
-		.ivsize			= SPECK64_BLOCK_SIZE,
-		.walksize		= SPECK_NEON_CHUNK_SIZE,
-		.setkey			= speck64_xts_setkey,
-		.encrypt		= speck64_xts_encrypt,
-		.decrypt		= speck64_xts_decrypt,
-	}
-};
-
-static int __init speck_neon_module_init(void)
-{
-	if (!(elf_hwcap & HWCAP_ASIMD))
-		return -ENODEV;
-	return crypto_register_skciphers(speck_algs, ARRAY_SIZE(speck_algs));
-}
-
-static void __exit speck_neon_module_exit(void)
-{
-	crypto_unregister_skciphers(speck_algs, ARRAY_SIZE(speck_algs));
-}
-
-module_init(speck_neon_module_init);
-module_exit(speck_neon_module_exit);
-
-MODULE_DESCRIPTION("Speck block cipher (NEON-accelerated)");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
-MODULE_ALIAS_CRYPTO("xts(speck128)");
-MODULE_ALIAS_CRYPTO("xts-speck128-neon");
-MODULE_ALIAS_CRYPTO("xts(speck64)");
-MODULE_ALIAS_CRYPTO("xts-speck64-neon");

arch/arm64/include/asm/percpu.h

@@ -96,6 +96,7 @@ static inline unsigned long __percpu_##op(void *ptr,			\
 		: [val] "Ir" (val));					\
 		break;							\
 	default:							\
+		ret = 0;						\
 		BUILD_BUG();						\
 	}								\
 									\
@@ -125,6 +126,7 @@ static inline unsigned long __percpu_read(void *ptr, int size)
 		ret = READ_ONCE(*(u64 *)ptr);
 		break;
 	default:
+		ret = 0;
 		BUILD_BUG();
 	}
 
@@ -194,6 +196,7 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
 		: [val] "r" (val));
 		break;
 	default:
+		ret = 0;
 		BUILD_BUG();
 	}
 

arch/arm64/kernel/cpufeature.c

@@ -848,15 +848,29 @@ static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unus
 }
 
 static bool has_cache_idc(const struct arm64_cpu_capabilities *entry,
-			  int __unused)
+			  int scope)
 {
-	return read_sanitised_ftr_reg(SYS_CTR_EL0) & BIT(CTR_IDC_SHIFT);
+	u64 ctr;
+
+	if (scope == SCOPE_SYSTEM)
+		ctr = arm64_ftr_reg_ctrel0.sys_val;
+	else
+		ctr = read_cpuid_cachetype();
+
+	return ctr & BIT(CTR_IDC_SHIFT);
 }
 
 static bool has_cache_dic(const struct arm64_cpu_capabilities *entry,
-			  int __unused)
+			  int scope)
 {
-	return read_sanitised_ftr_reg(SYS_CTR_EL0) & BIT(CTR_DIC_SHIFT);
+	u64 ctr;
+
+	if (scope == SCOPE_SYSTEM)
+		ctr = arm64_ftr_reg_ctrel0.sys_val;
+	else
+		ctr = read_cpuid_cachetype();
+
+	return ctr & BIT(CTR_DIC_SHIFT);
 }
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0

arch/arm64/kernel/entry.S

@@ -589,7 +589,7 @@ el1_undef:
 	inherit_daif	pstate=x23, tmp=x2
 	mov	x0, sp
 	bl	do_undefinstr
-	ASM_BUG()
+	kernel_exit 1
 el1_dbg:
 	/*
 	 * Debug exception handling

arch/arm64/kernel/probes/kprobes.c

@@ -23,7 +23,9 @@
 #include <linux/slab.h>
 #include <linux/stop_machine.h>
 #include <linux/sched/debug.h>
+#include <linux/set_memory.h>
 #include <linux/stringify.h>
+#include <linux/vmalloc.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 #include <asm/cacheflush.h>
@@ -42,10 +44,21 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 static void __kprobes
 post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
 
+static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
+{
+	void *addrs[1];
+	u32 insns[1];
+
+	addrs[0] = addr;
+	insns[0] = opcode;
+
+	return aarch64_insn_patch_text(addrs, insns, 1);
+}
+
 static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
 {
 	/* prepare insn slot */
-	p->ainsn.api.insn[0] = cpu_to_le32(p->opcode);
+	patch_text(p->ainsn.api.insn, p->opcode);
 
 	flush_icache_range((uintptr_t) (p->ainsn.api.insn),
 			   (uintptr_t) (p->ainsn.api.insn) +
@@ -118,15 +131,15 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	return 0;
 }
 
-static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
+void *alloc_insn_page(void)
 {
-	void *addrs[1];
-	u32 insns[1];
+	void *page;
 
-	addrs[0] = (void *)addr;
-	insns[0] = (u32)opcode;
+	page = vmalloc_exec(PAGE_SIZE);
+	if (page)
+		set_memory_ro((unsigned long)page, 1);
 
-	return aarch64_insn_patch_text(addrs, insns, 1);
+	return page;
 }
 
 /* arm kprobe: install breakpoint in text */

arch/arm64/kernel/traps.c

@@ -310,10 +310,12 @@ static int call_undef_hook(struct pt_regs *regs)
 	int (*fn)(struct pt_regs *regs, u32 instr) = NULL;
 	void __user *pc = (void __user *)instruction_pointer(regs);
 
-	if (!user_mode(regs))
-		return 1;
-
-	if (compat_thumb_mode(regs)) {
+	if (!user_mode(regs)) {
+		__le32 instr_le;
+		if (probe_kernel_address((__force __le32 *)pc, instr_le))
+			goto exit;
+		instr = le32_to_cpu(instr_le);
+	} else if (compat_thumb_mode(regs)) {
 		/* 16-bit Thumb instruction */
 		__le16 instr_le;
 		if (get_user(instr_le, (__le16 __user *)pc))
@@ -407,6 +409,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 		return;
 
 	force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc);
+	BUG_ON(!user_mode(regs));
 }
 
 void cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused)

arch/arm64/lib/Makefile

@@ -12,7 +12,7 @@ lib-y		:= clear_user.o delay.o copy_from_user.o		\
 # when supported by the CPU. Result and argument registers are handled
 # correctly, based on the function prototype.
 lib-$(CONFIG_ARM64_LSE_ATOMICS) += atomic_ll_sc.o
-CFLAGS_atomic_ll_sc.o	:= -fcall-used-x0 -ffixed-x1 -ffixed-x2		\
+CFLAGS_atomic_ll_sc.o	:= -ffixed-x1 -ffixed-x2        		\
 		   -ffixed-x3 -ffixed-x4 -ffixed-x5 -ffixed-x6		\
 		   -ffixed-x7 -fcall-saved-x8 -fcall-saved-x9		\
 		   -fcall-saved-x10 -fcall-saved-x11 -fcall-saved-x12	\

arch/m68k/configs/amiga_defconfig

@@ -657,7 +657,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/apollo_defconfig

@@ -614,7 +614,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/atari_defconfig

@@ -635,7 +635,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/bvme6000_defconfig

@@ -606,7 +606,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/hp300_defconfig

@@ -616,7 +616,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/mac_defconfig

@@ -638,7 +638,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/multi_defconfig

@@ -720,7 +720,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/mvme147_defconfig

@@ -606,7 +606,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/mvme16x_defconfig

@@ -606,7 +606,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/q40_defconfig

@@ -629,7 +629,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/sun3_defconfig

@@ -607,7 +607,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/m68k/configs/sun3x_defconfig

@@ -608,7 +608,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -67,7 +67,7 @@ void (*cvmx_override_pko_queue_priority) (int pko_port,
 void (*cvmx_override_ipd_port_setup) (int ipd_port);
 
 /* Port count per interface */
-static int interface_port_count[5];
+static int interface_port_count[9];
 
 /**
  * Return the number of interfaces the chip has. Each interface

arch/mips/configs/cavium_octeon_defconfig

@@ -140,6 +140,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_STAGING=y
 CONFIG_OCTEON_ETHERNET=y
+CONFIG_OCTEON_USB=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_RAS=y
 CONFIG_EXT4_FS=y

arch/mips/include/asm/mach-loongson64/irq.h

@@ -10,7 +10,7 @@
 #define MIPS_CPU_IRQ_BASE 56
 
 #define LOONGSON_UART_IRQ   (MIPS_CPU_IRQ_BASE + 2) /* UART */
-#define LOONGSON_HT1_IRQ    (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
+#define LOONGSON_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 3) /* CASCADE */
 #define LOONGSON_TIMER_IRQ  (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
 
 #define LOONGSON_HT1_CFG_BASE		loongson_sysconf.ht_control_base

arch/mips/include/asm/processor.h

@@ -81,7 +81,7 @@ extern unsigned int vced_count, vcei_count;
 
 #endif
 
-#define VDSO_RANDOMIZE_SIZE	(TASK_IS_32BIT_ADDR ? SZ_1M : SZ_256M)
+#define VDSO_RANDOMIZE_SIZE	(TASK_IS_32BIT_ADDR ? SZ_1M : SZ_64M)
 
 extern unsigned long mips_stack_top(void);
 #define STACK_TOP		mips_stack_top()

arch/mips/kernel/crash.c

@@ -36,6 +36,9 @@ static void crash_shutdown_secondary(void *passed_regs)
 	if (!cpu_online(cpu))
 		return;
 
+	/* We won't be sent IPIs any more. */
+	set_cpu_online(cpu, false);
+
 	local_irq_disable();
 	if (!cpumask_test_cpu(cpu, &cpus_in_crash))
 		crash_save_cpu(regs, cpu);

arch/mips/kernel/machine_kexec.c

@@ -118,6 +118,9 @@ machine_kexec(struct kimage *image)
 			*ptr = (unsigned long) phys_to_virt(*ptr);
 	}
 
+	/* Mark offline BEFORE disabling local irq. */
+	set_cpu_online(smp_processor_id(), false);
+
 	/*
 	 * we do not want to be bothered.
 	 */

arch/mips/loongson64/loongson-3/irq.c

@@ -96,51 +96,8 @@ void mach_irq_dispatch(unsigned int pending)
 	}
 }
 
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_NO_SUSPEND,
-	.name = "cascade",
-};
-
-static inline void mask_loongson_irq(struct irq_data *d)
-{
-	clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
-	irq_disable_hazard();
-
-	/* Workaround: UART IRQ may deliver to any core */
-	if (d->irq == LOONGSON_UART_IRQ) {
-		int cpu = smp_processor_id();
-		int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
-		int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
-		u64 intenclr_addr = smp_group[node_id] |
-			(u64)(&LOONGSON_INT_ROUTER_INTENCLR);
-		u64 introuter_lpc_addr = smp_group[node_id] |
-			(u64)(&LOONGSON_INT_ROUTER_LPC);
-
-		*(volatile u32 *)intenclr_addr = 1 << 10;
-		*(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
-	}
-}
-
-static inline void unmask_loongson_irq(struct irq_data *d)
-{
-	/* Workaround: UART IRQ may deliver to any core */
-	if (d->irq == LOONGSON_UART_IRQ) {
-		int cpu = smp_processor_id();
-		int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
-		int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
-		u64 intenset_addr = smp_group[node_id] |
-			(u64)(&LOONGSON_INT_ROUTER_INTENSET);
-		u64 introuter_lpc_addr = smp_group[node_id] |
-			(u64)(&LOONGSON_INT_ROUTER_LPC);
-
-		*(volatile u32 *)intenset_addr = 1 << 10;
-		*(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
-	}
-
-	set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
-	irq_enable_hazard();
-}
+static inline void mask_loongson_irq(struct irq_data *d) { }
+static inline void unmask_loongson_irq(struct irq_data *d) { }
 
  /* For MIPS IRQs which shared by all cores */
 static struct irq_chip loongson_irq_chip = {
@@ -183,12 +140,11 @@ void __init mach_init_irq(void)
 	chip->irq_set_affinity = plat_set_irq_affinity;
 
 	irq_set_chip_and_handler(LOONGSON_UART_IRQ,
-			&loongson_irq_chip, handle_level_irq);
+			&loongson_irq_chip, handle_percpu_irq);
+	irq_set_chip_and_handler(LOONGSON_BRIDGE_IRQ,
+			&loongson_irq_chip, handle_percpu_irq);
 
-	/* setup HT1 irq */
-	setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
-
-	set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+	set_c0_status(STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP6);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

arch/mips/pci/pci-legacy.c

@@ -127,8 +127,12 @@ static void pcibios_scanbus(struct pci_controller *hose)
 	if (pci_has_flag(PCI_PROBE_ONLY)) {
 		pci_bus_claim_resources(bus);
 	} else {
+		struct pci_bus *child;
+
 		pci_bus_size_bridges(bus);
 		pci_bus_assign_resources(bus);
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
 	}
 	pci_bus_add_devices(bus);
 }

arch/parisc/kernel/entry.S

@@ -186,7 +186,7 @@
 	bv,n	0(%r3)
 	nop
 	.word	0		/* checksum (will be patched) */
-	.word	PA(os_hpmc)	/* address of handler */
+	.word	0		/* address of handler */
 	.word	0		/* length of handler */
 	.endm
 

arch/parisc/kernel/hpmc.S

@@ -85,7 +85,7 @@ END(hpmc_pim_data)
 
 	.import intr_save, code
 	.align 16
-ENTRY_CFI(os_hpmc)
+ENTRY(os_hpmc)
 .os_hpmc:
 
 	/*
@@ -302,7 +302,6 @@ os_hpmc_6:
 	b .
 	nop
 	.align 16	/* make function length multiple of 16 bytes */
-ENDPROC_CFI(os_hpmc)
 .os_hpmc_end:
 
 

arch/parisc/kernel/traps.c

@@ -802,7 +802,8 @@ void __init initialize_ivt(const void *iva)
 	 *    the Length/4 words starting at Address is zero.
 	 */
 
-	/* Compute Checksum for HPMC handler */
+	/* Setup IVA and compute checksum for HPMC handler */
+	ivap[6] = (u32)__pa(os_hpmc);
 	length = os_hpmc_size;
 	ivap[7] = length;
 

arch/parisc/mm/init.c

@@ -494,12 +494,8 @@ static void __init map_pages(unsigned long start_vaddr,
 						pte = pte_mkhuge(pte);
 				}
 
-				if (address >= end_paddr) {
-					if (force)
-						break;
-					else
-						pte_val(pte) = 0;
-				}
+				if (address >= end_paddr)
+					break;
 
 				set_pte(pg_table, pte);
 

arch/powerpc/Makefile

@@ -238,7 +238,11 @@ cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_ALTIVEC)	+= $(call as-option,-Wa$(comma)-maltivec)
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 cpu-as-$(CONFIG_E500)		+= -Wa,-me500
-cpu-as-$(CONFIG_PPC_BOOK3S_64)	+= -Wa,-mpower4
+
+# When using '-many -mpower4' gas will first try and find a matching power4
+# mnemonic and failing that it will allow any valid mnemonic that GAS knows
+# about. GCC will pass -many to GAS when assembling, clang does not.
+cpu-as-$(CONFIG_PPC_BOOK3S_64)	+= -Wa,-mpower4 -Wa,-many
 cpu-as-$(CONFIG_PPC_E500MC)	+= $(call as-option,-Wa$(comma)-me500mc)
 
 KBUILD_AFLAGS += $(cpu-as-y)

arch/powerpc/boot/crt0.S

@@ -47,8 +47,10 @@ p_end:		.long	_end
 p_pstack:	.long	_platform_stack_top
 #endif
 
-	.weak	_zimage_start
 	.globl	_zimage_start
+	/* Clang appears to require the .weak directive to be after the symbol
+	 * is defined. See https://bugs.llvm.org/show_bug.cgi?id=38921  */
+	.weak	_zimage_start
 _zimage_start:
 	.globl	_zimage_start_lib
 _zimage_start_lib:

arch/powerpc/include/asm/io.h

@@ -285,19 +285,13 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  * their hooks, a bitfield is reserved for use by the platform near the
  * top of MMIO addresses (not PIO, those have to cope the hard way).
  *
- * This bit field is 12 bits and is at the top of the IO virtual
- * addresses PCI_IO_INDIRECT_TOKEN_MASK.
+ * The highest address in the kernel virtual space are:
  *
- * The kernel virtual space is thus:
+ *  d0003fffffffffff	# with Hash MMU
+ *  c00fffffffffffff	# with Radix MMU
  *
- *  0xD000000000000000		: vmalloc
- *  0xD000080000000000		: PCI PHB IO space
- *  0xD000080080000000		: ioremap
- *  0xD0000fffffffffff		: end of ioremap region
- *
- * Since the top 4 bits are reserved as the region ID, we use thus
- * the next 12 bits and keep 4 bits available for the future if the
- * virtual address space is ever to be extended.
+ * The top 4 bits are reserved as the region ID on hash, leaving us 8 bits
+ * that can be used for the field.
  *
  * The direct IO mapping operations will then mask off those bits
  * before doing the actual access, though that only happen when
@@ -309,8 +303,8 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  */
 
 #ifdef CONFIG_PPC_INDIRECT_MMIO
-#define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
-#define PCI_IO_IND_TOKEN_SHIFT	48
+#define PCI_IO_IND_TOKEN_SHIFT	52
+#define PCI_IO_IND_TOKEN_MASK	(0xfful << PCI_IO_IND_TOKEN_SHIFT)
 #define PCI_FIX_ADDR(addr)						\
 	((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
 #define PCI_GET_ADDR_TOKEN(addr)					\

arch/powerpc/include/asm/mmu-8xx.h

@@ -34,20 +34,12 @@
  * respectively NA for All or X for Supervisor and no access for User.
  * Then we use the APG to say whether accesses are according to Page rules or
  * "all Supervisor" rules (Access to all)
- * We also use the 2nd APG bit for _PAGE_ACCESSED when having SWAP:
- * When that bit is not set access is done iaw "all user"
- * which means no access iaw page rules.
- * Therefore, we define 4 APG groups. lsb is _PMD_USER, 2nd is _PAGE_ACCESSED
- * 0x => No access => 11 (all accesses performed as user iaw page definition)
- * 10 => No user => 01 (all accesses performed according to page definition)
- * 11 => User => 00 (all accesses performed as supervisor iaw page definition)
+ * Therefore, we define 2 APG groups. lsb is _PMD_USER
+ * 0 => No user => 01 (all accesses performed according to page definition)
+ * 1 => User => 00 (all accesses performed as supervisor iaw page definition)
  * We define all 16 groups so that all other bits of APG can take any value
  */
-#ifdef CONFIG_SWAP
-#define MI_APG_INIT	0xf4f4f4f4
-#else
 #define MI_APG_INIT	0x44444444
-#endif
 
 /* The effective page number register.  When read, contains the information
  * about the last instruction TLB miss.  When MI_RPN is written, bits in
@@ -115,20 +107,12 @@
  * Supervisor and no access for user and NA for ALL.
  * Then we use the APG to say whether accesses are according to Page rules or
  * "all Supervisor" rules (Access to all)
- * We also use the 2nd APG bit for _PAGE_ACCESSED when having SWAP:
- * When that bit is not set access is done iaw "all user"
- * which means no access iaw page rules.
- * Therefore, we define 4 APG groups. lsb is _PMD_USER, 2nd is _PAGE_ACCESSED
- * 0x => No access => 11 (all accesses performed as user iaw page definition)
- * 10 => No user => 01 (all accesses performed according to page definition)
- * 11 => User => 00 (all accesses performed as supervisor iaw page definition)
+ * Therefore, we define 2 APG groups. lsb is _PMD_USER
+ * 0 => No user => 01 (all accesses performed according to page definition)
+ * 1 => User => 00 (all accesses performed as supervisor iaw page definition)
  * We define all 16 groups so that all other bits of APG can take any value
  */
-#ifdef CONFIG_SWAP
-#define MD_APG_INIT	0xf4f4f4f4
-#else
 #define MD_APG_INIT	0x44444444
-#endif
 
 /* The effective page number register.  When read, contains the information
  * about the last instruction TLB miss.  When MD_RPN is written, bits in
@@ -180,12 +164,6 @@
  */
 #define SPRN_M_TW	799
 
-/* APGs */
-#define M_APG0		0x00000000
-#define M_APG1		0x00000020
-#define M_APG2		0x00000040
-#define M_APG3		0x00000060
-
 #ifdef CONFIG_PPC_MM_SLICES
 #include <asm/nohash/32/slice.h>
 #define SLICE_ARRAY_SIZE	(1 << (32 - SLICE_LOW_SHIFT - 1))

arch/powerpc/include/asm/mpic.h

@@ -393,7 +393,14 @@ extern struct bus_type mpic_subsys;
 #define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
 
 /* Get the version of primary MPIC */
+#ifdef CONFIG_MPIC
 extern u32 fsl_mpic_primary_get_version(void);
+#else
+static inline u32 fsl_mpic_primary_get_version(void)
+{
+	return 0;
+}
+#endif
 
 /* Allocate the controller structure and setup the linux irq descs
  * for the range if interrupts passed in. No HW initialization is

arch/powerpc/kernel/eeh.c

@@ -169,6 +169,11 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 	int n = 0, l = 0;
 	char buffer[128];
 
+	if (!pdn) {
+		pr_warn("EEH: Note: No error log for absent device.\n");
+		return 0;
+	}
+
 	n += scnprintf(buf+n, len-n, "%04x:%02x:%02x.%01x\n",
 		       pdn->phb->global_number, pdn->busno,
 		       PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));

arch/powerpc/kernel/head_8xx.S

@@ -353,13 +353,14 @@ _ENTRY(ITLBMiss_cmp)
 #if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE)
 	mtcr	r12
 #endif
-
-#ifdef CONFIG_SWAP
-	rlwinm	r11, r10, 31, _PAGE_ACCESSED >> 1
-#endif
 	/* Load the MI_TWC with the attributes for this "segment." */
 	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
 
+#ifdef CONFIG_SWAP
+	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
+	and	r11, r11, r10
+	rlwimi	r10, r11, 0, _PAGE_PRESENT
+#endif
 	li	r11, RPN_PATTERN | 0x200
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 20 and 23 must be clear.
@@ -470,14 +471,22 @@ _ENTRY(DTLBMiss_jmp)
 	 * above.
 	 */
 	rlwimi	r11, r10, 0, _PAGE_GUARDED
-#ifdef CONFIG_SWAP
-	/* _PAGE_ACCESSED has to be set. We use second APG bit for that, 0
-	 * on that bit will represent a Non Access group
-	 */
-	rlwinm	r11, r10, 31, _PAGE_ACCESSED >> 1
-#endif
 	mtspr	SPRN_MD_TWC, r11
 
+	/* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
+	 * We also need to know if the insn is a load/store, so:
+	 * Clear _PAGE_PRESENT and load that which will
+	 * trap into DTLB Error with store bit set accordinly.
+	 */
+	/* PRESENT=0x1, ACCESSED=0x20
+	 * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
+	 * r10 = (r10 & ~PRESENT) | r11;
+	 */
+#ifdef CONFIG_SWAP
+	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
+	and	r11, r11, r10
+	rlwimi	r10, r11, 0, _PAGE_PRESENT
+#endif
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
@@ -637,8 +646,8 @@ InstructionBreakpoint:
  */
 DTLBMissIMMR:
 	mtcr	r12
-	/* Set 512k byte guarded page and mark it valid and accessed */
-	li	r10, MD_PS512K | MD_GUARDED | MD_SVALID | M_APG2
+	/* Set 512k byte guarded page and mark it valid */
+	li	r10, MD_PS512K | MD_GUARDED | MD_SVALID
 	mtspr	SPRN_MD_TWC, r10
 	mfspr	r10, SPRN_IMMR			/* Get current IMMR */
 	rlwinm	r10, r10, 0, 0xfff80000		/* Get 512 kbytes boundary */
@@ -656,8 +665,8 @@ _ENTRY(dtlb_miss_exit_2)
 
 DTLBMissLinear:
 	mtcr	r12
-	/* Set 8M byte page and mark it valid and accessed */
-	li	r11, MD_PS8MEG | MD_SVALID | M_APG2
+	/* Set 8M byte page and mark it valid */
+	li	r11, MD_PS8MEG | MD_SVALID
 	mtspr	SPRN_MD_TWC, r11
 	rlwinm	r10, r10, 0, 0x0f800000	/* 8xx supports max 256Mb RAM */
 	ori	r10, r10, 0xf0 | MD_SPS16K | _PAGE_PRIVILEGED | _PAGE_DIRTY | \
@@ -675,8 +684,8 @@ _ENTRY(dtlb_miss_exit_3)
 #ifndef CONFIG_PIN_TLB_TEXT
 ITLBMissLinear:
 	mtcr	r12
-	/* Set 8M byte page and mark it valid,accessed */
-	li	r11, MI_PS8MEG | MI_SVALID | M_APG2
+	/* Set 8M byte page and mark it valid */
+	li	r11, MI_PS8MEG | MI_SVALID
 	mtspr	SPRN_MI_TWC, r11
 	rlwinm	r10, r10, 0, 0x0f800000	/* 8xx supports max 256Mb RAM */
 	ori	r10, r10, 0xf0 | MI_SPS16K | _PAGE_PRIVILEGED | _PAGE_DIRTY | \
@@ -960,7 +969,7 @@ initial_mmu:
 	ori	r8, r8, MI_EVALID	/* Mark it valid */
 	mtspr	SPRN_MI_EPN, r8
 	li	r8, MI_PS8MEG /* Set 8M byte page */
-	ori	r8, r8, MI_SVALID | M_APG2	/* Make it valid, APG 2 */
+	ori	r8, r8, MI_SVALID	/* Make it valid */
 	mtspr	SPRN_MI_TWC, r8
 	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
 	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
@@ -987,7 +996,7 @@ initial_mmu:
 	ori	r8, r8, MD_EVALID	/* Mark it valid */
 	mtspr	SPRN_MD_EPN, r8
 	li	r8, MD_PS512K | MD_GUARDED	/* Set 512k byte page */
-	ori	r8, r8, MD_SVALID | M_APG2	/* Make it valid and accessed */
+	ori	r8, r8, MD_SVALID	/* Make it valid */
 	mtspr	SPRN_MD_TWC, r8
 	mr	r8, r9			/* Create paddr for TLB */
 	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */

arch/powerpc/kernel/mce_power.c

@@ -89,6 +89,13 @@ static void flush_and_reload_slb(void)
 
 static void flush_erat(void)
 {
+#ifdef CONFIG_PPC_BOOK3S_64
+	if (!early_cpu_has_feature(CPU_FTR_ARCH_300)) {
+		flush_and_reload_slb();
+		return;
+	}
+#endif
+	/* PPC_INVALIDATE_ERAT can only be used on ISA v3 and newer */
 	asm volatile(PPC_INVALIDATE_ERAT : : :"memory");
 }
 

arch/powerpc/kernel/module.c

@@ -74,6 +74,14 @@ int module_finalize(const Elf_Ehdr *hdr,
 				  (void *)sect->sh_addr + sect->sh_size);
 #endif /* CONFIG_PPC64 */
 
+#ifdef PPC64_ELF_ABI_v1
+	sect = find_section(hdr, sechdrs, ".opd");
+	if (sect != NULL) {
+		me->arch.start_opd = sect->sh_addr;
+		me->arch.end_opd = sect->sh_addr + sect->sh_size;
+	}
+#endif /* PPC64_ELF_ABI_v1 */
+
 #ifdef CONFIG_PPC_BARRIER_NOSPEC
 	sect = find_section(hdr, sechdrs, "__spec_barrier_fixup");
 	if (sect != NULL)

arch/powerpc/kernel/module_64.c

@@ -360,11 +360,6 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
 		else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0)
 			dedotify_versions((void *)hdr + sechdrs[i].sh_offset,
 					  sechdrs[i].sh_size);
-		else if (!strcmp(secstrings + sechdrs[i].sh_name, ".opd")) {
-			me->arch.start_opd = sechdrs[i].sh_addr;
-			me->arch.end_opd = sechdrs[i].sh_addr +
-					   sechdrs[i].sh_size;
-		}
 
 		/* We don't handle .init for the moment: rename to _init */
 		while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init")))
@@ -685,7 +680,14 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 		case R_PPC64_REL32:
 			/* 32 bits relative (used by relative exception tables) */
-			*(u32 *)location = value - (unsigned long)location;
+			/* Convert value to relative */
+			value -= (unsigned long)location;
+			if (value + 0x80000000 > 0xffffffff) {
+				pr_err("%s: REL32 %li out of range!\n",
+				       me->name, (long int)value);
+				return -ENOEXEC;
+			}
+			*(u32 *)location = value;
 			break;
 
 		case R_PPC64_TOCSAVE:

arch/powerpc/kernel/setup_64.c

@@ -243,13 +243,19 @@ static void cpu_ready_for_interrupts(void)
 	}
 
 	/*
-	 * Fixup HFSCR:TM based on CPU features. The bit is set by our
-	 * early asm init because at that point we haven't updated our
-	 * CPU features from firmware and device-tree. Here we have,
-	 * so let's do it.
+	 * Set HFSCR:TM based on CPU features:
+	 * In the special case of TM no suspend (P9N DD2.1), Linux is
+	 * told TM is off via the dt-ftrs but told to (partially) use
+	 * it via OPAL_REINIT_CPUS_TM_SUSPEND_DISABLED. So HFSCR[TM]
+	 * will be off from dt-ftrs but we need to turn it on for the
+	 * no suspend case.
 	 */
-	if (cpu_has_feature(CPU_FTR_HVMODE) && !cpu_has_feature(CPU_FTR_TM_COMP))
-		mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) & ~HFSCR_TM);
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		if (cpu_has_feature(CPU_FTR_TM_COMP))
+			mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) | HFSCR_TM);
+		else
+			mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) & ~HFSCR_TM);
+	}
 
 	/* Set IR and DR in PACA MSR */
 	get_paca()->kernel_msr = MSR_KERNEL;

arch/powerpc/kernel/traps.c

@@ -767,12 +767,17 @@ void machine_check_exception(struct pt_regs *regs)
 	if (check_io_access(regs))
 		goto bail;
 
-	die("Machine check", regs, SIGBUS);
-
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
 		nmi_panic(regs, "Unrecoverable Machine check");
 
+	if (!nested)
+		nmi_exit();
+
+	die("Machine check", regs, SIGBUS);
+
+	return;
+
 bail:
 	if (!nested)
 		nmi_exit();

arch/powerpc/kvm/trace.h

@@ -6,8 +6,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace
 
 /*
  * Tracepoint for guest mode entry.
@@ -120,4 +118,10 @@ TRACE_EVENT(kvm_check_requests,
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace
+
 #include <trace/define_trace.h>

arch/powerpc/kvm/trace_booke.h

@@ -6,8 +6,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm_booke
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace_booke
 
 #define kvm_trace_symbol_exit \
 	{0, "CRITICAL"}, \
@@ -218,4 +216,11 @@ TRACE_EVENT(kvm_booke_queue_irqprio,
 #endif
 
 /* This part must be outside protection */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_booke
+
 #include <trace/define_trace.h>

arch/powerpc/kvm/trace_hv.h

@@ -9,8 +9,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm_hv
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace_hv
 
 #define kvm_trace_symbol_hcall \
 	{H_REMOVE,			"H_REMOVE"}, \
@@ -497,4 +495,11 @@ TRACE_EVENT(kvmppc_run_vcpu_exit,
 #endif /* _TRACE_KVM_HV_H */
 
 /* This part must be outside protection */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_hv
+
 #include <trace/define_trace.h>

arch/powerpc/kvm/trace_pr.h

@@ -8,8 +8,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm_pr
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace_pr
 
 TRACE_EVENT(kvm_book3s_reenter,
 	TP_PROTO(int r, struct kvm_vcpu *vcpu),
@@ -257,4 +255,11 @@ TRACE_EVENT(kvm_exit,
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_pr
+
 #include <trace/define_trace.h>

arch/powerpc/mm/8xx_mmu.c

@@ -79,7 +79,7 @@ void __init MMU_init_hw(void)
 	for (; i < 32 && mem >= LARGE_PAGE_SIZE_8M; i++) {
 		mtspr(SPRN_MD_CTR, ctr | (i << 8));
 		mtspr(SPRN_MD_EPN, (unsigned long)__va(addr) | MD_EVALID);
-		mtspr(SPRN_MD_TWC, MD_PS8MEG | MD_SVALID | M_APG2);
+		mtspr(SPRN_MD_TWC, MD_PS8MEG | MD_SVALID);
 		mtspr(SPRN_MD_RPN, addr | flags | _PAGE_PRESENT);
 		addr += LARGE_PAGE_SIZE_8M;
 		mem -= LARGE_PAGE_SIZE_8M;

arch/powerpc/mm/dump_linuxpagetables.c

@@ -418,12 +418,13 @@ static void walk_pagetables(struct pg_state *st)
 	unsigned int i;
 	unsigned long addr;
 
+	addr = st->start_address;
+
 	/*
 	 * Traverse the linux pagetable structure and dump pages that are in
 	 * the hash pagetable.
 	 */
-	for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
-		addr = KERN_VIRT_START + i * PGDIR_SIZE;
+	for (i = 0; i < PTRS_PER_PGD; i++, pgd++, addr += PGDIR_SIZE) {
 		if (!pgd_none(*pgd) && !pgd_huge(*pgd))
 			/* pgd exists */
 			walk_pud(st, pgd, addr);
@@ -472,9 +473,14 @@ static int ptdump_show(struct seq_file *m, void *v)
 {
 	struct pg_state st = {
 		.seq = m,
-		.start_address = KERN_VIRT_START,
 		.marker = address_markers,
 	};
+
+	if (radix_enabled())
+		st.start_address = PAGE_OFFSET;
+	else
+		st.start_address = KERN_VIRT_START;
+
 	/* Traverse kernel page tables */
 	walk_pagetables(&st);
 	note_page(&st, 0, 0, 0);

arch/powerpc/mm/hash_native_64.c

@@ -115,6 +115,8 @@ static void tlbiel_all_isa300(unsigned int num_sets, unsigned int is)
 	tlbiel_hash_set_isa300(0, is, 0, 2, 1);
 
 	asm volatile("ptesync": : :"memory");
+
+	asm volatile(PPC_INVALIDATE_ERAT "; isync" : : :"memory");
 }
 
 void hash__tlbiel_all(unsigned int action)
@@ -140,8 +142,6 @@ void hash__tlbiel_all(unsigned int action)
 		tlbiel_all_isa206(POWER7_TLB_SETS, is);
 	else
 		WARN(1, "%s called on pre-POWER7 CPU\n", __func__);
-
-	asm volatile(PPC_INVALIDATE_ERAT "; isync" : : :"memory");
 }
 
 static inline unsigned long  ___tlbie(unsigned long vpn, int psize,

arch/powerpc/mm/hugetlbpage.c

@@ -19,6 +19,7 @@
 #include <linux/moduleparam.h>
 #include <linux/swap.h>
 #include <linux/swapops.h>
+#include <linux/kmemleak.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
@@ -112,6 +113,8 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 		for (i = i - 1 ; i >= 0; i--, hpdp--)
 			*hpdp = __hugepd(0);
 		kmem_cache_free(cachep, new);
+	} else {
+		kmemleak_ignore(new);
 	}
 	spin_unlock(ptl);
 	return 0;

arch/powerpc/mm/numa.c

@@ -1179,7 +1179,7 @@ static long vphn_get_associativity(unsigned long cpu,
 
 	switch (rc) {
 	case H_FUNCTION:
-		printk(KERN_INFO
+		printk_once(KERN_INFO
 			"VPHN is not supported. Disabling polling...\n");
 		stop_topology_update();
 		break;

arch/powerpc/mm/slice.c

@@ -61,6 +61,13 @@ static void slice_print_mask(const char *label, const struct slice_mask *mask) {
 
 #endif
 
+static inline bool slice_addr_is_low(unsigned long addr)
+{
+	u64 tmp = (u64)addr;
+
+	return tmp < SLICE_LOW_TOP;
+}
+
 static void slice_range_to_mask(unsigned long start, unsigned long len,
 				struct slice_mask *ret)
 {
@@ -70,7 +77,7 @@ static void slice_range_to_mask(unsigned long start, unsigned long len,
 	if (SLICE_NUM_HIGH)
 		bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
 
-	if (start < SLICE_LOW_TOP) {
+	if (slice_addr_is_low(start)) {
 		unsigned long mend = min(end,
 					 (unsigned long)(SLICE_LOW_TOP - 1));
 
@@ -78,7 +85,7 @@ static void slice_range_to_mask(unsigned long start, unsigned long len,
 			- (1u << GET_LOW_SLICE_INDEX(start));
 	}
 
-	if ((start + len) > SLICE_LOW_TOP) {
+	if (SLICE_NUM_HIGH && !slice_addr_is_low(end)) {
 		unsigned long start_index = GET_HIGH_SLICE_INDEX(start);
 		unsigned long align_end = ALIGN(end, (1UL << SLICE_HIGH_SHIFT));
 		unsigned long count = GET_HIGH_SLICE_INDEX(align_end) - start_index;
@@ -133,7 +140,7 @@ static void slice_mask_for_free(struct mm_struct *mm, struct slice_mask *ret,
 		if (!slice_low_has_vma(mm, i))
 			ret->low_slices |= 1u << i;
 
-	if (high_limit <= SLICE_LOW_TOP)
+	if (slice_addr_is_low(high_limit - 1))
 		return;
 
 	for (i = 0; i < GET_HIGH_SLICE_INDEX(high_limit); i++)
@@ -182,7 +189,7 @@ static bool slice_check_range_fits(struct mm_struct *mm,
 	unsigned long end = start + len - 1;
 	u64 low_slices = 0;
 
-	if (start < SLICE_LOW_TOP) {
+	if (slice_addr_is_low(start)) {
 		unsigned long mend = min(end,
 					 (unsigned long)(SLICE_LOW_TOP - 1));
 
@@ -192,7 +199,7 @@ static bool slice_check_range_fits(struct mm_struct *mm,
 	if ((low_slices & available->low_slices) != low_slices)
 		return false;
 
-	if (SLICE_NUM_HIGH && ((start + len) > SLICE_LOW_TOP)) {
+	if (SLICE_NUM_HIGH && !slice_addr_is_low(end)) {
 		unsigned long start_index = GET_HIGH_SLICE_INDEX(start);
 		unsigned long align_end = ALIGN(end, (1UL << SLICE_HIGH_SHIFT));
 		unsigned long count = GET_HIGH_SLICE_INDEX(align_end) - start_index;
@@ -303,7 +310,7 @@ static bool slice_scan_available(unsigned long addr,
 				 int end, unsigned long *boundary_addr)
 {
 	unsigned long slice;
-	if (addr < SLICE_LOW_TOP) {
+	if (slice_addr_is_low(addr)) {
 		slice = GET_LOW_SLICE_INDEX(addr);
 		*boundary_addr = (slice + end) << SLICE_LOW_SHIFT;
 		return !!(available->low_slices & (1u << slice));
@@ -706,7 +713,7 @@ unsigned int get_slice_psize(struct mm_struct *mm, unsigned long addr)
 
 	VM_BUG_ON(radix_enabled());
 
-	if (addr < SLICE_LOW_TOP) {
+	if (slice_addr_is_low(addr)) {
 		psizes = mm->context.low_slices_psize;
 		index = GET_LOW_SLICE_INDEX(addr);
 	} else {

arch/powerpc/mm/tlb_nohash.c

@@ -503,6 +503,9 @@ static void setup_page_sizes(void)
 		for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
 			struct mmu_psize_def *def = &mmu_psize_defs[psize];
 
+			if (!def->shift)
+				continue;
+
 			if (tlb1ps & (1U << (def->shift - 10))) {
 				def->flags |= MMU_PAGE_SIZE_DIRECT;
 

arch/powerpc/platforms/powernv/memtrace.c

@@ -90,17 +90,15 @@ static bool memtrace_offline_pages(u32 nid, u64 start_pfn, u64 nr_pages)
 	walk_memory_range(start_pfn, end_pfn, (void *)MEM_OFFLINE,
 			  change_memblock_state);
 
-	lock_device_hotplug();
-	remove_memory(nid, start_pfn << PAGE_SHIFT, nr_pages << PAGE_SHIFT);
-	unlock_device_hotplug();
 
 	return true;
 }
 
 static u64 memtrace_alloc_node(u32 nid, u64 size)
 {
-	u64 start_pfn, end_pfn, nr_pages;
+	u64 start_pfn, end_pfn, nr_pages, pfn;
 	u64 base_pfn;
+	u64 bytes = memory_block_size_bytes();
 
 	if (!node_spanned_pages(nid))
 		return 0;
@@ -113,8 +111,21 @@ static u64 memtrace_alloc_node(u32 nid, u64 size)
 	end_pfn = round_down(end_pfn - nr_pages, nr_pages);
 
 	for (base_pfn = end_pfn; base_pfn > start_pfn; base_pfn -= nr_pages) {
-		if (memtrace_offline_pages(nid, base_pfn, nr_pages) == true)
+		if (memtrace_offline_pages(nid, base_pfn, nr_pages) == true) {
+			/*
+			 * Remove memory in memory block size chunks so that
+			 * iomem resources are always split to the same size and
+			 * we never try to remove memory that spans two iomem
+			 * resources.
+			 */
+			lock_device_hotplug();
+			end_pfn = base_pfn + nr_pages;
+			for (pfn = base_pfn; pfn < end_pfn; pfn += bytes>> PAGE_SHIFT) {
+				remove_memory(nid, pfn << PAGE_SHIFT, bytes);
+			}
+			unlock_device_hotplug();
 			return base_pfn << PAGE_SHIFT;
+		}
 	}
 
 	return 0;

arch/riscv/Makefile

@@ -82,4 +82,8 @@ core-y += arch/riscv/kernel/ arch/riscv/mm/
 
 libs-y += arch/riscv/lib/
 
+PHONY += vdso_install
+vdso_install:
+	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+
 all: vmlinux

arch/riscv/include/asm/uaccess.h

@@ -400,13 +400,13 @@ extern unsigned long __must_check __asm_copy_from_user(void *to,
 static inline unsigned long
 raw_copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	return __asm_copy_to_user(to, from, n);
+	return __asm_copy_from_user(to, from, n);
 }
 
 static inline unsigned long
 raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	return __asm_copy_from_user(to, from, n);
+	return __asm_copy_to_user(to, from, n);
 }
 
 extern long strncpy_from_user(char *dest, const char __user *src, long count);

arch/riscv/kernel/module.c

@@ -21,7 +21,7 @@ static int apply_r_riscv_32_rela(struct module *me, u32 *location, Elf_Addr v)
 {
 	if (v != (u32)v) {
 		pr_err("%s: value %016llx out of range for 32-bit field\n",
-		       me->name, v);
+		       me->name, (long long)v);
 		return -EINVAL;
 	}
 	*location = v;
@@ -102,7 +102,7 @@ static int apply_r_riscv_pcrel_hi20_rela(struct module *me, u32 *location,
 	if (offset != (s32)offset) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
-		  me->name, v, location);
+		  me->name, (long long)v, location);
 		return -EINVAL;
 	}
 
@@ -144,7 +144,7 @@ static int apply_r_riscv_hi20_rela(struct module *me, u32 *location,
 	if (IS_ENABLED(CMODEL_MEDLOW)) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
-		  me->name, v, location);
+		  me->name, (long long)v, location);
 		return -EINVAL;
 	}
 
@@ -188,7 +188,7 @@ static int apply_r_riscv_got_hi20_rela(struct module *me, u32 *location,
 	} else {
 		pr_err(
 		  "%s: can not generate the GOT entry for symbol = %016llx from PC = %p\n",
-		  me->name, v, location);
+		  me->name, (long long)v, location);
 		return -EINVAL;
 	}
 
@@ -212,7 +212,7 @@ static int apply_r_riscv_call_plt_rela(struct module *me, u32 *location,
 		} else {
 			pr_err(
 			  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
-			  me->name, v, location);
+			  me->name, (long long)v, location);
 			return -EINVAL;
 		}
 	}
@@ -234,7 +234,7 @@ static int apply_r_riscv_call_rela(struct module *me, u32 *location,
 	if (offset != fill_v) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
-		  me->name, v, location);
+		  me->name, (long long)v, location);
 		return -EINVAL;
 	}
 

arch/s390/boot/compressed/Makefile

@@ -20,7 +20,7 @@ KBUILD_CFLAGS := $(KBUILD_CFLAGS_DECOMPRESSOR)
 OBJECTS := $(addprefix $(obj)/,$(obj-y))
 
 LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS)
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) FORCE
 	$(call if_changed,ld)
 
 # extract required uncompressed vmlinux symbols and adjust them to reflect offsets inside vmlinux.bin
@@ -51,17 +51,17 @@ suffix-$(CONFIG_KERNEL_LZMA)  := .lzma
 suffix-$(CONFIG_KERNEL_LZO)  := .lzo
 suffix-$(CONFIG_KERNEL_XZ)  := .xz
 
-$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lz4)
-$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
-$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzo)
-$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,xzkern)
 
 LDFLAGS_piggy.o := -r --format binary --oformat $(LD_BFD) -T

arch/s390/defconfig

@@ -221,7 +221,6 @@ CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m

arch/s390/include/asm/mmu_context.h

@@ -45,8 +45,6 @@ static inline int init_new_context(struct task_struct *tsk,
 		mm->context.asce_limit = STACK_TOP_MAX;
 		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
 				   _ASCE_USER_BITS | _ASCE_TYPE_REGION3;
-		/* pgd_alloc() did not account this pud */
-		mm_inc_nr_puds(mm);
 		break;
 	case -PAGE_SIZE:
 		/* forked 5-level task, set new asce with new_mm->pgd */
@@ -62,9 +60,6 @@ static inline int init_new_context(struct task_struct *tsk,
 		/* forked 2-level compat task, set new asce with new mm->pgd */
 		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
 				   _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
-		/* pgd_alloc() did not account this pmd */
-		mm_inc_nr_pmds(mm);
-		mm_inc_nr_puds(mm);
 	}
 	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
 	return 0;

arch/s390/include/asm/pgalloc.h

@@ -36,11 +36,11 @@ static inline void crst_table_init(unsigned long *crst, unsigned long entry)
 
 static inline unsigned long pgd_entry_type(struct mm_struct *mm)
 {
-	if (mm->context.asce_limit <= _REGION3_SIZE)
+	if (mm_pmd_folded(mm))
 		return _SEGMENT_ENTRY_EMPTY;
-	if (mm->context.asce_limit <= _REGION2_SIZE)
+	if (mm_pud_folded(mm))
 		return _REGION3_ENTRY_EMPTY;
-	if (mm->context.asce_limit <= _REGION1_SIZE)
+	if (mm_p4d_folded(mm))
 		return _REGION2_ENTRY_EMPTY;
 	return _REGION1_ENTRY_EMPTY;
 }

arch/s390/include/asm/pgtable.h

@@ -485,6 +485,24 @@ static inline int is_module_addr(void *addr)
 				   _REGION_ENTRY_PROTECT | \
 				   _REGION_ENTRY_NOEXEC)
 
+static inline bool mm_p4d_folded(struct mm_struct *mm)
+{
+	return mm->context.asce_limit <= _REGION1_SIZE;
+}
+#define mm_p4d_folded(mm) mm_p4d_folded(mm)
+
+static inline bool mm_pud_folded(struct mm_struct *mm)
+{
+	return mm->context.asce_limit <= _REGION2_SIZE;
+}
+#define mm_pud_folded(mm) mm_pud_folded(mm)
+
+static inline bool mm_pmd_folded(struct mm_struct *mm)
+{
+	return mm->context.asce_limit <= _REGION3_SIZE;
+}
+#define mm_pmd_folded(mm) mm_pmd_folded(mm)
+
 static inline int mm_has_pgste(struct mm_struct *mm)
 {
 #ifdef CONFIG_PGSTE