add i2S-6ULL SOM module from i2SOM technology company
support boot from eMMC and NAND flash.
This commit is contained in:
SteveChen
12
board/i2som/i2c_6ull_14x14/Kconfig
Normal file
12
board/i2som/i2c_6ull_14x14/Kconfig
Normal file
@ -0,0 +1,12 @@
|
||||
if TARGET_I2SOM_IMX6ULL_14X14 || TARGET_I2SOM_IMX6ULL_9X9_EVK
|
||||
|
||||
config SYS_BOARD
|
||||
default "i2c_6ull_14x14"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "i2som"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "i2som_6ull_14x14"
|
||||
|
||||
endif
|
||||
7
board/i2som/i2c_6ull_14x14/MAINTAINERS
Normal file
7
board/i2som/i2c_6ull_14x14/MAINTAINERS
Normal file
@ -0,0 +1,7 @@
|
||||
MX6ULLEVK BOARD
|
||||
M: Peng Fan <peng.fan@nxp.com>
|
||||
S: Maintained
|
||||
F: board/freescale/mx6ullevk/
|
||||
F: include/configs/mx6ullevk.h
|
||||
F: configs/mx6ull_14x14_evk_defconfig
|
||||
F: configs/mx6ull_9x9_evk_defconfig
|
||||
10
board/i2som/i2c_6ull_14x14/Makefile
Normal file
10
board/i2som/i2c_6ull_14x14/Makefile
Normal file
@ -0,0 +1,10 @@
|
||||
# (C) Copyright 2015 Freescale Semiconductor, Inc.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := i2c_6ull_14x14.o
|
||||
|
||||
extra-$(CONFIG_USE_PLUGIN) := plugin.bin
|
||||
$(obj)/plugin.bin: $(obj)/plugin.o
|
||||
$(OBJCOPY) -O binary --gap-fill 0xff $< $@
|
||||
28
board/i2som/i2c_6ull_14x14/README
Normal file
28
board/i2som/i2c_6ull_14x14/README
Normal file
@ -0,0 +1,28 @@
|
||||
How to use U-Boot on Freescale MX6ULL 14x14 EVK
|
||||
-----------------------------------------------
|
||||
|
||||
- Build U-Boot for MX6ULL 14x14 EVK:
|
||||
|
||||
$ make mrproper
|
||||
$ make mx6ull_14x14_evk_defconfig
|
||||
$ make
|
||||
|
||||
This will generate the u-boot image u-boot.imx.
|
||||
|
||||
- Flash the u-boot image into the micro SD card:
|
||||
|
||||
sudo dd if=u-boot.imx of=/dev/mmcblk0 bs=1k seek=1; sync
|
||||
|
||||
- Jumper settings:
|
||||
|
||||
SW601: 0 0 1 0
|
||||
Sw602: 1 0
|
||||
|
||||
where 0 means bottom position and 1 means top position (from the
|
||||
switch label numbers reference).
|
||||
|
||||
- Connect the USB cable between the EVK and the PC for the console.
|
||||
(The USB console connector is the one close the push buttons)
|
||||
|
||||
- Insert the micro SD card in the board, power it up and U-Boot messages should
|
||||
come up.
|
||||
1188
board/i2som/i2c_6ull_14x14/i2c_6ull_14x14.c
Normal file
1188
board/i2som/i2c_6ull_14x14/i2c_6ull_14x14.c
Normal file
File diff suppressed because it is too large
Load Diff
116
board/i2som/i2c_6ull_14x14/imximage.cfg
Normal file
116
board/i2som/i2c_6ull_14x14/imximage.cfg
Normal file
@ -0,0 +1,116 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*
|
||||
* Refer docs/README.imxmage for more details about how-to configure
|
||||
* and create imximage boot image
|
||||
*
|
||||
* The syntax is taken as close as possible with the kwbimage
|
||||
*/
|
||||
|
||||
#define __ASSEMBLY__
|
||||
#include <config.h>
|
||||
|
||||
/* image version */
|
||||
|
||||
IMAGE_VERSION 2
|
||||
|
||||
/*
|
||||
* Boot Device : one of
|
||||
* spi/sd/nand/onenand, qspi/nor
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_QSPI
|
||||
BOOT_FROM qspi
|
||||
#elif defined(CONFIG_SYS_BOOT_EIMNOR)
|
||||
BOOT_FROM nor
|
||||
#else
|
||||
BOOT_FROM sd
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USE_PLUGIN
|
||||
/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
|
||||
PLUGIN board/i2som/i2c_b6ull_14x14/plugin.bin 0x00907000
|
||||
#else
|
||||
|
||||
#ifdef CONFIG_SECURE_BOOT
|
||||
CSF CONFIG_CSF_SIZE
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Device Configuration Data (DCD)
|
||||
*
|
||||
* Each entry must have the format:
|
||||
* Addr-type Address Value
|
||||
*
|
||||
* where:
|
||||
* Addr-type register length (1,2 or 4 bytes)
|
||||
* Address absolute address of the register
|
||||
* value value to be stored in the register
|
||||
*/
|
||||
|
||||
/* Enable all clocks */
|
||||
DATA 4 0x020c4068 0xffffffff
|
||||
DATA 4 0x020c406c 0xffffffff
|
||||
DATA 4 0x020c4070 0xffffffff
|
||||
DATA 4 0x020c4074 0xffffffff
|
||||
DATA 4 0x020c4078 0xffffffff
|
||||
DATA 4 0x020c407c 0xffffffff
|
||||
DATA 4 0x020c4080 0xffffffff
|
||||
|
||||
DATA 4 0x020E04B4 0x000C0000
|
||||
DATA 4 0x020E04AC 0x00000000
|
||||
DATA 4 0x020E027C 0x00000030
|
||||
DATA 4 0x020E0250 0x00000030
|
||||
DATA 4 0x020E024C 0x00000030
|
||||
DATA 4 0x020E0490 0x00000030
|
||||
DATA 4 0x020E0288 0x000C0030
|
||||
DATA 4 0x020E0270 0x00000000
|
||||
DATA 4 0x020E0260 0x00000030
|
||||
DATA 4 0x020E0264 0x00000030
|
||||
DATA 4 0x020E04A0 0x00000030
|
||||
DATA 4 0x020E0494 0x00020000
|
||||
DATA 4 0x020E0280 0x00000030
|
||||
DATA 4 0x020E0284 0x00000030
|
||||
DATA 4 0x020E04B0 0x00020000
|
||||
DATA 4 0x020E0498 0x00000030
|
||||
DATA 4 0x020E04A4 0x00000030
|
||||
DATA 4 0x020E0244 0x00000030
|
||||
DATA 4 0x020E0248 0x00000030
|
||||
DATA 4 0x021B001C 0x00008000
|
||||
DATA 4 0x021B0800 0xA1390003
|
||||
DATA 4 0x021B080C 0x00000004
|
||||
DATA 4 0x021B083C 0x41640158
|
||||
DATA 4 0x021B0848 0x40403237
|
||||
DATA 4 0x021B0850 0x40403C33
|
||||
DATA 4 0x021B081C 0x33333333
|
||||
DATA 4 0x021B0820 0x33333333
|
||||
DATA 4 0x021B082C 0xf3333333
|
||||
DATA 4 0x021B0830 0xf3333333
|
||||
DATA 4 0x021B08C0 0x00944009
|
||||
DATA 4 0x021B08b8 0x00000800
|
||||
DATA 4 0x021B0004 0x0002002D
|
||||
DATA 4 0x021B0008 0x1B333030
|
||||
DATA 4 0x021B000C 0x676B52F3
|
||||
DATA 4 0x021B0010 0xB66D0B63
|
||||
DATA 4 0x021B0014 0x01FF00DB
|
||||
DATA 4 0x021B0018 0x00201740
|
||||
DATA 4 0x021B001C 0x00008000
|
||||
DATA 4 0x021B002C 0x000026D2
|
||||
DATA 4 0x021B0030 0x006B1023
|
||||
DATA 4 0x021B0040 0x0000004F
|
||||
DATA 4 0x021B0000 0x84180000
|
||||
DATA 4 0x021B0890 0x00400000
|
||||
DATA 4 0x021B001C 0x02008032
|
||||
DATA 4 0x021B001C 0x00008033
|
||||
DATA 4 0x021B001C 0x00048031
|
||||
DATA 4 0x021B001C 0x15208030
|
||||
DATA 4 0x021B001C 0x04008040
|
||||
DATA 4 0x021B0020 0x00000800
|
||||
DATA 4 0x021B0818 0x00000227
|
||||
DATA 4 0x021B0004 0x0002552D
|
||||
DATA 4 0x021B0404 0x00011006
|
||||
DATA 4 0x021B001C 0x00000000
|
||||
|
||||
#endif
|
||||
119
board/i2som/i2c_6ull_14x14/imximage_lpddr2.cfg
Normal file
119
board/i2som/i2c_6ull_14x14/imximage_lpddr2.cfg
Normal file
@ -0,0 +1,119 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*
|
||||
* Refer docs/README.imxmage for more details about how-to configure
|
||||
* and create imximage boot image
|
||||
*
|
||||
* The syntax is taken as close as possible with the kwbimage
|
||||
*/
|
||||
|
||||
#define __ASSEMBLY__
|
||||
#include <config.h>
|
||||
|
||||
/* image version */
|
||||
|
||||
IMAGE_VERSION 2
|
||||
|
||||
/*
|
||||
* Boot Device : one of
|
||||
* spi/sd/nand/onenand, qspi/nor
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_QSPI
|
||||
BOOT_FROM qspi
|
||||
#elif defined(CONFIG_SYS_BOOT_EIMNOR)
|
||||
BOOT_FROM nor
|
||||
#else
|
||||
BOOT_FROM sd
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USE_PLUGIN
|
||||
/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
|
||||
PLUGIN board/freescale/mx6ullevk/plugin.bin 0x00907000
|
||||
#else
|
||||
|
||||
#ifdef CONFIG_SECURE_BOOT
|
||||
CSF CONFIG_CSF_SIZE
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Device Configuration Data (DCD)
|
||||
*
|
||||
* Each entry must have the format:
|
||||
* Addr-type Address Value
|
||||
*
|
||||
* where:
|
||||
* Addr-type register length (1,2 or 4 bytes)
|
||||
* Address absolute address of the register
|
||||
* value value to be stored in the register
|
||||
*/
|
||||
|
||||
DATA 4 0x020c4068 0xffffffff
|
||||
DATA 4 0x020c406c 0xffffffff
|
||||
DATA 4 0x020c4070 0xffffffff
|
||||
DATA 4 0x020c4074 0xffffffff
|
||||
DATA 4 0x020c4078 0xffffffff
|
||||
DATA 4 0x020c407c 0xffffffff
|
||||
DATA 4 0x020c4080 0xffffffff
|
||||
|
||||
DATA 4 0x020E04B4 0x00080000
|
||||
DATA 4 0x020E04AC 0x00000000
|
||||
DATA 4 0x020E027C 0x00000030
|
||||
DATA 4 0x020E0250 0x00000030
|
||||
DATA 4 0x020E024C 0x00000030
|
||||
DATA 4 0x020E0490 0x00000030
|
||||
DATA 4 0x020E0288 0x00000030
|
||||
DATA 4 0x020E0270 0x00000000
|
||||
DATA 4 0x020E0260 0x00000000
|
||||
DATA 4 0x020E0264 0x00000000
|
||||
DATA 4 0x020E04A0 0x00000030
|
||||
DATA 4 0x020E0494 0x00020000
|
||||
DATA 4 0x020E0280 0x00003030
|
||||
DATA 4 0x020E0284 0x00003030
|
||||
DATA 4 0x020E04B0 0x00020000
|
||||
DATA 4 0x020E0498 0x00000030
|
||||
DATA 4 0x020E04A4 0x00000030
|
||||
DATA 4 0x020E0244 0x00000030
|
||||
DATA 4 0x020E0248 0x00000030
|
||||
|
||||
DATA 4 0x021B001C 0x00008000
|
||||
DATA 4 0x021B085C 0x1b4700c7
|
||||
DATA 4 0x021B0800 0xA1390003
|
||||
DATA 4 0x021B0890 0x23400A38
|
||||
DATA 4 0x021B08b8 0x00000800
|
||||
|
||||
DATA 4 0x021B081C 0x33333333
|
||||
DATA 4 0x021B0820 0x33333333
|
||||
DATA 4 0x021B082C 0xf3333333
|
||||
DATA 4 0x021B0830 0xf3333333
|
||||
DATA 4 0x021B083C 0x20000000
|
||||
DATA 4 0x021B0848 0x40403439
|
||||
DATA 4 0x021B0850 0x4040342D
|
||||
DATA 4 0x021B08C0 0x00921012
|
||||
DATA 4 0x021B08b8 0x00000800
|
||||
|
||||
DATA 4 0x021B0004 0x00020052
|
||||
DATA 4 0x021B0008 0x00000000
|
||||
DATA 4 0x021B000C 0x33374133
|
||||
DATA 4 0x021B0010 0x00100A82
|
||||
DATA 4 0x021B0038 0x00170557
|
||||
DATA 4 0x021B0014 0x00000093
|
||||
DATA 4 0x021B0018 0x00201748
|
||||
DATA 4 0x021B002C 0x0F9F26D2
|
||||
DATA 4 0x021B0030 0x009F0010
|
||||
DATA 4 0x021B0040 0x00000047
|
||||
DATA 4 0x021B0000 0x83100000
|
||||
DATA 4 0x021B001C 0x003F8030
|
||||
DATA 4 0x021B001C 0xFF0A8030
|
||||
DATA 4 0x021B001C 0x82018030
|
||||
DATA 4 0x021B001C 0x04028030
|
||||
DATA 4 0x021B001C 0x01038030
|
||||
DATA 4 0x021B0020 0x00001800
|
||||
DATA 4 0x021B0818 0x00000000
|
||||
DATA 4 0x021B0800 0xA1310003
|
||||
DATA 4 0x021B0004 0x00025552
|
||||
DATA 4 0x021B0404 0x00011006
|
||||
DATA 4 0x021B001C 0x00000000
|
||||
#endif
|
||||
5
configs/i2som_imx6ull_14x14_emmc_defconfig
Normal file
5
configs/i2som_imx6ull_14x14_emmc_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/i2som/i2c_6ull_14x14/imximage.cfg,MX6ULL_EVK_EMMC_REWORK"
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_I2SOM_IMX6ULL_14X14=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/i2som_imx6ull_14x14_nand_defconfig
Normal file
5
configs/i2som_imx6ull_14x14_nand_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/i2som/i2c_6ull_14x14/imximage.cfg,SYS_BOOT_NAND"
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_I2SOM_IMX6ULL_14X14=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
387
include/configs/i2som_6ull_14x14.h
Normal file
387
include/configs/i2som_6ull_14x14.h
Normal file
@ -0,0 +1,387 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
#ifndef __I2SOM_IMX6ULL_14X14_CONFIG_H
|
||||
#define __I2SOM_IMX6ULL_14X14_CONFIG_H
|
||||
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <linux/sizes.h>
|
||||
#include "mx6_common.h"
|
||||
#include <asm/imx-common/gpio.h>
|
||||
|
||||
/* uncomment for PLUGIN mode support */
|
||||
/* #define CONFIG_USE_PLUGIN */
|
||||
|
||||
/* uncomment for SECURE mode support */
|
||||
/* #define CONFIG_SECURE_BOOT */
|
||||
|
||||
#ifdef CONFIG_SECURE_BOOT
|
||||
#ifndef CONFIG_CSF_SIZE
|
||||
#define CONFIG_CSF_SIZE 0x4000
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define is_mx6ull_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6ULL_9X9_EVK)
|
||||
|
||||
#ifdef CONFIG_TARGET_MX6ULL_9X9_EVK
|
||||
#define PHYS_SDRAM_SIZE SZ_256M
|
||||
#define CONFIG_BOOTARGS_CMA_SIZE "cma=96M "
|
||||
#else
|
||||
#define PHYS_SDRAM_SIZE SZ_512M
|
||||
#define CONFIG_BOOTARGS_CMA_SIZE ""
|
||||
/* DCDC used on 14x14 EVK, no PMIC */
|
||||
#undef CONFIG_LDO_BYPASS_CHECK
|
||||
#endif
|
||||
|
||||
/* SPL options */
|
||||
/* We default not support SPL
|
||||
* #define CONFIG_SPL_LIBCOMMON_SUPPORT
|
||||
* #define CONFIG_SPL_MMC_SUPPORT
|
||||
* #include "imx6_spl.h"
|
||||
*/
|
||||
|
||||
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
|
||||
#define CONFIG_MXC_UART
|
||||
#define CONFIG_MXC_UART_BASE UART1_BASE
|
||||
|
||||
/* MMC Configs */
|
||||
#ifdef CONFIG_FSL_USDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
|
||||
|
||||
/* NAND pin conflicts with usdhc2 */
|
||||
#ifdef CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
||||
#else
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* I2C configs */
|
||||
#define CONFIG_CMD_I2C
|
||||
#ifdef CONFIG_CMD_I2C
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_MXC
|
||||
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
||||
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
|
||||
/* PMIC only for 9X9 EVK */
|
||||
#define CONFIG_POWER
|
||||
#define CONFIG_POWER_I2C
|
||||
#define CONFIG_POWER_PFUZE3000
|
||||
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_NAND
|
||||
#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:5m(boot),10m(kernel),1m(dtb),-(rootfs) "
|
||||
#define CONFIG_FDT_FILE "findfdt="\
|
||||
"if test $fdt_file = undefined; then " \
|
||||
"if test $board_name = EVK && test $board_rev = 9X9; then " \
|
||||
"setenv fdt_file imx6ull-9x9-evk.dtb; fi; " \
|
||||
"if test $board_name = I2S-MX6ULL && test $board_rev = 14X14; then " \
|
||||
"setenv fdt_file i2c-b6ull-nand.dtb; fi; " \
|
||||
"if test $fdt_file = undefined; then " \
|
||||
"echo WARNING: Could not determine dtb to use; fi; " \
|
||||
"fi;\0"
|
||||
#else
|
||||
#define CONFIG_MFG_NAND_PARTITION ""
|
||||
#define CONFIG_FDT_FILE "findfdt="\
|
||||
"if test $fdt_file = undefined; then " \
|
||||
"if test $board_name = EVK && test $board_rev = 9X9; then " \
|
||||
"setenv fdt_file imx6ull-9x9-evk.dtb; fi; " \
|
||||
"if test $board_name = I2S-MX6ULL && test $board_rev = 14X14; then " \
|
||||
"setenv fdt_file i2c-b6ull-emmc.dtb; fi; " \
|
||||
"if test $fdt_file = undefined; then " \
|
||||
"echo WARNING: Could not determine dtb to use; fi; " \
|
||||
"fi;\0"
|
||||
|
||||
#endif
|
||||
|
||||
#define CONFIG_MFG_ENV_SETTINGS \
|
||||
"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
|
||||
CONFIG_BOOTARGS_CMA_SIZE \
|
||||
"rdinit=/linuxrc " \
|
||||
"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
|
||||
"g_mass_storage.file=/fat g_mass_storage.ro=1 " \
|
||||
"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
|
||||
"g_mass_storage.iSerialNumber=\"\" "\
|
||||
CONFIG_MFG_NAND_PARTITION \
|
||||
"clk_ignore_unused "\
|
||||
"\0" \
|
||||
"initrd_addr=0x83800000\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
|
||||
|
||||
#if defined(CONFIG_SYS_BOOT_NAND)
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
CONFIG_MFG_ENV_SETTINGS \
|
||||
"panel=TFT43AB\0" \
|
||||
"fdt_addr=0x83000000\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"bootargs=console=ttymxc0,115200 ubi.mtd=3 " \
|
||||
"root=ubi0:rootfs rootfstype=ubifs " \
|
||||
CONFIG_BOOTARGS_CMA_SIZE \
|
||||
"mtdparts=gpmi-nand:5m(boot),10m(kernel),1m(dtb),-(rootfs)\0"\
|
||||
"bootcmd=nand read ${loadaddr} 0x500000 0xA00000;"\
|
||||
"nand read ${fdt_addr} 0xF00000 0x100000;"\
|
||||
"bootz ${loadaddr} - ${fdt_addr}\0"
|
||||
|
||||
#else
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
CONFIG_MFG_ENV_SETTINGS \
|
||||
"script=boot.scr\0" \
|
||||
"image=zImage\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"fdt_file=undefined\0" \
|
||||
"fdt_addr=0x83000000\0" \
|
||||
"boot_fdt=try\0" \
|
||||
"ip_dyn=yes\0" \
|
||||
"panel=TFT43AB\0" \
|
||||
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
||||
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
||||
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
||||
"mmcautodetect=yes\0" \
|
||||
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||
CONFIG_BOOTARGS_CMA_SIZE \
|
||||
"root=${mmcroot}\0" \
|
||||
"loadbootscript=" \
|
||||
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source\0" \
|
||||
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootz; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootz; " \
|
||||
"fi;\0" \
|
||||
"netargs=setenv bootargs console=${console},${baudrate} " \
|
||||
CONFIG_BOOTARGS_CMA_SIZE \
|
||||
"root=/dev/nfs " \
|
||||
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
||||
"netboot=echo Booting from net ...; " \
|
||||
"run netargs; " \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"${get_cmd} ${image}; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
||||
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootz; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootz; " \
|
||||
"fi;\0" \
|
||||
CONFIG_FDT_FILE \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"run findfdt;" \
|
||||
"mmc dev ${mmcdev};" \
|
||||
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loadimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run netboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else run netboot; fi"
|
||||
#endif
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
#define CONFIG_CMD_MEMTEST
|
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
#define CONFIG_STACKSIZE SZ_128K
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_QSPI
|
||||
#define CONFIG_FSL_QSPI
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#elif defined CONFIG_SYS_BOOT_NAND
|
||||
#define CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#else
|
||||
#define CONFIG_FSL_QSPI
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
|
||||
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
|
||||
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
|
||||
|
||||
#define CONFIG_CMD_BMODE
|
||||
|
||||
#ifdef CONFIG_FSL_QSPI
|
||||
#define CONFIG_QSPI_BASE QSPI0_BASE_ADDR
|
||||
#define CONFIG_QSPI_MEMMAP_BASE QSPI0_AMBA_BASE
|
||||
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_SPI_FLASH
|
||||
#define CONFIG_SPI_FLASH_BAR
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 40000000
|
||||
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
||||
#define CONFIG_SPI_FLASH_STMICRO
|
||||
#endif
|
||||
|
||||
/* NAND stuff */
|
||||
#ifdef CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_NAND_TRIMFFS
|
||||
|
||||
#define CONFIG_NAND_MXS
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
|
||||
/* DMA stuff, needed for GPMI/MXS NAND support */
|
||||
#define CONFIG_APBH_DMA
|
||||
#define CONFIG_APBH_DMA_BURST
|
||||
#define CONFIG_APBH_DMA_BURST8
|
||||
#endif
|
||||
|
||||
#define CONFIG_ENV_SIZE SZ_8K
|
||||
#if defined(CONFIG_ENV_IS_IN_MMC)
|
||||
#define CONFIG_ENV_OFFSET (12 * SZ_64K)
|
||||
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
|
||||
#define CONFIG_ENV_OFFSET (768 * 1024)
|
||||
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
||||
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
||||
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
||||
#elif defined(CONFIG_ENV_IS_IN_NAND)
|
||||
#undef CONFIG_ENV_SIZE
|
||||
#define CONFIG_ENV_OFFSET (60 << 20)
|
||||
#define CONFIG_ENV_SECT_SIZE (128 << 10)
|
||||
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
||||
#endif
|
||||
|
||||
|
||||
/* USB Configs */
|
||||
#define CONFIG_CMD_USB
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_MX6
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||
#define CONFIG_MXC_USB_FLAGS 0
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_FEC_MXC
|
||||
#define CONFIG_MII
|
||||
#define CONFIG_FEC_ENET_DEV 0
|
||||
#define CONFIG_PHYLIB
|
||||
|
||||
#if (CONFIG_FEC_ENET_DEV == 0)
|
||||
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x0
|
||||
#define CONFIG_FEC_XCV_TYPE RMII
|
||||
#elif (CONFIG_FEC_ENET_DEV == 1)
|
||||
#define IMX_FEC_BASE ENET2_BASE_ADDR
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x1
|
||||
#define CONFIG_FEC_XCV_TYPE RMII
|
||||
#endif
|
||||
#define CONFIG_ETHPRIME "FEC"
|
||||
|
||||
#define CONFIG_PHYLIB
|
||||
#define CONFIG_PHY_SMSC
|
||||
#endif
|
||||
|
||||
#define CONFIG_IMX_THERMAL
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_VIDEO
|
||||
#ifdef CONFIG_VIDEO
|
||||
#define CONFIG_CFB_CONSOLE
|
||||
#define CONFIG_VIDEO_MXS
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
#define CONFIG_VIDEO_SW_CURSOR
|
||||
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
#define CONFIG_SPLASH_SCREEN
|
||||
#define CONFIG_SPLASH_SCREEN_ALIGN
|
||||
#define CONFIG_CMD_BMP
|
||||
#define CONFIG_BMP_16BPP
|
||||
#define CONFIG_VIDEO_BMP_RLE8
|
||||
#define CONFIG_VIDEO_BMP_LOGO
|
||||
#define CONFIG_IMX_VIDEO_SKIP
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define CONFIG_IOMUX_LPSR
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx6ullevk_android.h"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user