MLK-12527-3 android: Add board support to enable android fastboot
Add board level support for android fastboot feature. Each board has a android specified header file for defining android related configuraitons. And add build targets for their android uboot images building. For mx6qsabreauto, mx6sabresd and mx7dsabresd, we enable the android fastboot exclusive with DFU. Signed-off-by: Ye Li <ye.li@nxp.com>
This commit is contained in:
Ye Li
@ -35,6 +35,13 @@
|
||||
#ifdef CONFIG_CMD_SATA
|
||||
#include <asm/imx-common/sata.h>
|
||||
#endif
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
#include <fsl_fastboot.h>
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
#include <recovery.h>
|
||||
#endif
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
||||
@ -930,3 +937,122 @@ int board_ehci_power(int port, int on)
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
void board_fastboot_setup(void)
|
||||
{
|
||||
switch (get_boot_device()) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_SATA)
|
||||
case SATA_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "sata");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota sata");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_SATA*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc0");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc0");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc1");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc1");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
case NAND_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "nand");
|
||||
if (!getenv("fbparts"))
|
||||
setenv("fbparts", ANDROID_FASTBOOT_NAND_PARTS);
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd",
|
||||
"nand read ${loadaddr} ${boot_nand_offset} "
|
||||
"${boot_nand_size};boota ${loadaddr}");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
|
||||
default:
|
||||
printf("unsupported boot devices\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#define GPIO_VOL_DN_KEY IMX_GPIO_NR(5, 14)
|
||||
iomux_v3_cfg_t const recovery_key_pads[] = {
|
||||
(MX6_PAD_DISP0_DAT20__GPIO5_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
||||
};
|
||||
|
||||
int check_recovery_cmd_file(void)
|
||||
{
|
||||
int button_pressed = 0;
|
||||
int recovery_mode = 0;
|
||||
|
||||
recovery_mode = recovery_check_and_clean_flag();
|
||||
|
||||
/* Check Recovery Combo Button press or not. */
|
||||
imx_iomux_v3_setup_multiple_pads(recovery_key_pads,
|
||||
ARRAY_SIZE(recovery_key_pads));
|
||||
|
||||
gpio_direction_input(GPIO_VOL_DN_KEY);
|
||||
|
||||
if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { /* VOL_DN key is low assert */
|
||||
button_pressed = 1;
|
||||
printf("Recovery key pressed\n");
|
||||
}
|
||||
|
||||
return recovery_mode || button_pressed;
|
||||
}
|
||||
|
||||
void board_recovery_setup(void)
|
||||
{
|
||||
int bootdev = get_boot_device();
|
||||
|
||||
switch (bootdev) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_SATA)
|
||||
case SATA_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota sata recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_SATA*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc0 recovery");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc1 recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
case NAND_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"nand read ${loadaddr} ${recovery_nand_offset} "
|
||||
"${recovery_nand_size};boota ${loadaddr}");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
|
||||
default:
|
||||
printf("Unsupported bootup device for recovery: dev: %d\n",
|
||||
bootdev);
|
||||
return;
|
||||
}
|
||||
|
||||
printf("setup env for recovery..\n");
|
||||
setenv("bootcmd", "run bootcmd_android_recovery");
|
||||
}
|
||||
#endif /*CONFIG_ANDROID_RECOVERY*/
|
||||
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
|
||||
@ -37,6 +37,12 @@
|
||||
#ifdef CONFIG_CMD_SATA
|
||||
#include <asm/imx-common/sata.h>
|
||||
#endif
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
#include <fsl_fastboot.h>
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
#include <recovery.h>
|
||||
#endif
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
@ -1098,6 +1104,122 @@ int checkboard(void)
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
|
||||
void board_fastboot_setup(void)
|
||||
{
|
||||
switch (get_boot_device()) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_SATA)
|
||||
case SATA_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "sata");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota sata");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_SATA*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc0");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc0");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc1");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc1");
|
||||
break;
|
||||
case MMC4_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc2");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc2");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("unsupported boot devices\n");
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#define GPIO_VOL_DN_KEY IMX_GPIO_NR(1, 5)
|
||||
iomux_v3_cfg_t const recovery_key_pads[] = {
|
||||
(MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
||||
};
|
||||
|
||||
int check_recovery_cmd_file(void)
|
||||
{
|
||||
int button_pressed = 0;
|
||||
int recovery_mode = 0;
|
||||
|
||||
recovery_mode = recovery_check_and_clean_flag();
|
||||
|
||||
/* Check Recovery Combo Button press or not. */
|
||||
imx_iomux_v3_setup_multiple_pads(recovery_key_pads,
|
||||
ARRAY_SIZE(recovery_key_pads));
|
||||
|
||||
gpio_direction_input(GPIO_VOL_DN_KEY);
|
||||
|
||||
if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { /* VOL_DN key is low assert */
|
||||
button_pressed = 1;
|
||||
printf("Recovery key pressed\n");
|
||||
}
|
||||
|
||||
return recovery_mode || button_pressed;
|
||||
}
|
||||
|
||||
void board_recovery_setup(void)
|
||||
{
|
||||
int bootdev = get_boot_device();
|
||||
|
||||
switch (bootdev) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_SATA)
|
||||
case SATA_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"boota sata recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_SATA*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"boota mmc0 recovery");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"boota mmc1 recovery");
|
||||
break;
|
||||
case MMC4_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"boota mmc2 recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("Unsupported bootup device for recovery: dev: %d\n",
|
||||
bootdev);
|
||||
return;
|
||||
}
|
||||
|
||||
printf("setup env for recovery..\n");
|
||||
setenv("bootcmd", "run bootcmd_android_recovery");
|
||||
}
|
||||
|
||||
#endif /*CONFIG_ANDROID_RECOVERY*/
|
||||
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#include <spl.h>
|
||||
#include <libfdt.h>
|
||||
|
||||
@ -14,6 +14,7 @@
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/imx-common/boot_mode.h>
|
||||
#include <asm/imx-common/iomux-v3.h>
|
||||
#include <asm/imx-common/mxc_i2c.h>
|
||||
#include <asm/imx-common/spi.h>
|
||||
@ -33,6 +34,12 @@
|
||||
#include <lcd.h>
|
||||
#include <mxc_epdc_fb.h>
|
||||
#endif
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
#include <fsl_fastboot.h>
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
#include <recovery.h>
|
||||
#endif
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
@ -791,6 +798,111 @@ int checkboard(void)
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MXC_KPD
|
||||
#define MX6SL_KEYPAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
|
||||
PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_120ohm)
|
||||
|
||||
iomux_v3_cfg_t const mxc_kpd_pads[] = {
|
||||
(MX6_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
||||
(MX6_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
||||
(MX6_PAD_KEY_COL2__KPP_COL_2 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
||||
(MX6_PAD_KEY_COL3__KPP_COL_3 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
||||
|
||||
(MX6_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(MX6SL_KEYPAD_CTRL)),
|
||||
(MX6_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(MX6SL_KEYPAD_CTRL)),
|
||||
(MX6_PAD_KEY_ROW2__KPP_ROW_2 | MUX_PAD_CTRL(MX6SL_KEYPAD_CTRL)),
|
||||
(MX6_PAD_KEY_ROW3__KPP_ROW_3 | MUX_PAD_CTRL(MX6SL_KEYPAD_CTRL)),
|
||||
};
|
||||
int setup_mxc_kpd(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(mxc_kpd_pads,
|
||||
ARRAY_SIZE(mxc_kpd_pads));
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /*CONFIG_MXC_KPD*/
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
void board_fastboot_setup(void)
|
||||
{
|
||||
switch (get_boot_device()) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc0");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc0");
|
||||
break;
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc1");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc1");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc2");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc2");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("unsupported boot devices\n");
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
int check_recovery_cmd_file(void)
|
||||
{
|
||||
return recovery_check_and_clean_flag();
|
||||
}
|
||||
|
||||
void board_recovery_setup(void)
|
||||
{
|
||||
int bootdev = get_boot_device();
|
||||
|
||||
/*current uboot BSP only supports USDHC2*/
|
||||
switch (bootdev) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"boota mmc0 recovery");
|
||||
break;
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"boota mmc1 recovery");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"boota mmc2 recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("Unsupported bootup device for recovery: dev: %d\n",
|
||||
bootdev);
|
||||
return;
|
||||
}
|
||||
|
||||
printf("setup env for recovery..\n");
|
||||
setenv("bootcmd", "run bootcmd_android_recovery");
|
||||
}
|
||||
|
||||
#endif /*CONFIG_ANDROID_RECOVERY*/
|
||||
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#include <spl.h>
|
||||
#include <libfdt.h>
|
||||
|
||||
@ -31,6 +31,12 @@
|
||||
#include <usb/ehci-fsl.h>
|
||||
#include <pca953x.h>
|
||||
#include <asm/imx-common/video.h>
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
#include <fsl_fastboot.h>
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
#include <recovery.h>
|
||||
#endif
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
@ -724,3 +730,91 @@ int checkboard(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
void board_fastboot_setup(void)
|
||||
{
|
||||
switch (get_boot_device()) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc0");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc0");
|
||||
break;
|
||||
case SD4_BOOT:
|
||||
case MMC4_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc1");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc1");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
case NAND_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "nand");
|
||||
if (!getenv("fbparts"))
|
||||
setenv("fbparts", ANDROID_FASTBOOT_NAND_PARTS);
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd",
|
||||
"nand read ${loadaddr} ${boot_nand_offset} "
|
||||
"${boot_nand_size};boota ${loadaddr}");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
|
||||
|
||||
default:
|
||||
printf("unsupported boot devices\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
int check_recovery_cmd_file(void)
|
||||
{
|
||||
int recovery_mode = 0;
|
||||
|
||||
recovery_mode = recovery_check_and_clean_flag();
|
||||
|
||||
return recovery_mode;
|
||||
}
|
||||
|
||||
void board_recovery_setup(void)
|
||||
{
|
||||
int bootdev = get_boot_device();
|
||||
|
||||
switch (bootdev) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc0 recovery");
|
||||
break;
|
||||
case SD4_BOOT:
|
||||
case MMC4_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc1 recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
case NAND_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"nand read ${loadaddr} ${recovery_nand_offset} "
|
||||
"${recovery_nand_size};boota ${loadaddr}");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
|
||||
default:
|
||||
printf("Unsupported bootup device for recovery: dev: %d\n",
|
||||
bootdev);
|
||||
return;
|
||||
}
|
||||
|
||||
printf("setup env for recovery..\n");
|
||||
setenv("bootcmd", "run bootcmd_android_recovery");
|
||||
}
|
||||
#endif /*CONFIG_ANDROID_RECOVERY*/
|
||||
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
|
||||
@ -13,6 +13,7 @@
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/imx-common/boot_mode.h>
|
||||
#include <asm/imx-common/iomux-v3.h>
|
||||
#include <asm/imx-common/boot_mode.h>
|
||||
#include <asm/io.h>
|
||||
@ -31,6 +32,13 @@
|
||||
#include <usb/ehci-fsl.h>
|
||||
#include <asm/imx-common/video.h>
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
#include <fsl_fastboot.h>
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
#include <recovery.h>
|
||||
#endif
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
||||
@ -806,7 +814,6 @@ int board_late_init(void)
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: MX6SX SABRE SDB\n");
|
||||
@ -814,6 +821,102 @@ int checkboard(void)
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
void board_fastboot_setup(void)
|
||||
{
|
||||
switch (get_boot_device()) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc0");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc0");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc1");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc1");
|
||||
break;
|
||||
case SD4_BOOT:
|
||||
case MMC4_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc2");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc2");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("unsupported boot devices\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#define GPIO_VOL_DN_KEY IMX_GPIO_NR(1, 19)
|
||||
iomux_v3_cfg_t const recovery_key_pads[] = {
|
||||
(MX6_PAD_CSI_DATA05__GPIO1_IO_19 | MUX_PAD_CTRL(BUTTON_PAD_CTRL)),
|
||||
};
|
||||
|
||||
int check_recovery_cmd_file(void)
|
||||
{
|
||||
int button_pressed = 0;
|
||||
int recovery_mode = 0;
|
||||
|
||||
recovery_mode = recovery_check_and_clean_flag();
|
||||
|
||||
/* Check Recovery Combo Button press or not. */
|
||||
imx_iomux_v3_setup_multiple_pads(recovery_key_pads,
|
||||
ARRAY_SIZE(recovery_key_pads));
|
||||
|
||||
gpio_direction_input(GPIO_VOL_DN_KEY);
|
||||
|
||||
if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { /* VOL_DN key is low assert */
|
||||
button_pressed = 1;
|
||||
printf("Recovery key pressed\n");
|
||||
}
|
||||
|
||||
return recovery_mode || button_pressed;
|
||||
}
|
||||
|
||||
void board_recovery_setup(void)
|
||||
{
|
||||
int bootdev = get_boot_device();
|
||||
|
||||
switch (bootdev) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc0 recovery");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc1 recovery");
|
||||
break;
|
||||
case SD4_BOOT:
|
||||
case MMC4_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc2 recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("Unsupported bootup device for recovery: dev: %d\n",
|
||||
bootdev);
|
||||
return;
|
||||
}
|
||||
|
||||
printf("setup env for recovery..\n");
|
||||
setenv("bootcmd", "run bootcmd_android_recovery");
|
||||
}
|
||||
#endif /*CONFIG_ANDROID_RECOVERY*/
|
||||
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#include <libfdt.h>
|
||||
#include <spl.h>
|
||||
|
||||
@ -31,6 +31,13 @@
|
||||
#include <usb/ehci-fsl.h>
|
||||
#include <asm/imx-common/video.h>
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
#include <fsl_fastboot.h>
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
#include <recovery.h>
|
||||
#endif
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
||||
@ -860,6 +867,94 @@ int checkboard(void)
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
void board_fastboot_setup(void)
|
||||
{
|
||||
switch (get_boot_device()) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc0");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc0");
|
||||
break;
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc1");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc1");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
case NAND_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "nand");
|
||||
if (!getenv("fbparts"))
|
||||
setenv("fbparts", ANDROID_FASTBOOT_NAND_PARTS);
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd",
|
||||
"nand read ${loadaddr} ${boot_nand_offset} "
|
||||
"${boot_nand_size};boota ${loadaddr}");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
|
||||
|
||||
default:
|
||||
printf("unsupported boot devices\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
int check_recovery_cmd_file(void)
|
||||
{
|
||||
int recovery_mode = 0;
|
||||
|
||||
recovery_mode = recovery_check_and_clean_flag();
|
||||
|
||||
return recovery_mode;
|
||||
}
|
||||
|
||||
void board_recovery_setup(void)
|
||||
{
|
||||
int bootdev = get_boot_device();
|
||||
|
||||
switch (bootdev) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc0 recovery");
|
||||
break;
|
||||
case SD2_BOOT:
|
||||
case MMC2_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc1 recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
case NAND_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery",
|
||||
"nand read ${loadaddr} ${recovery_nand_offset} "
|
||||
"${recovery_nand_size};boota ${loadaddr}");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
|
||||
|
||||
default:
|
||||
printf("Unsupported bootup device for recovery: dev: %d\n",
|
||||
bootdev);
|
||||
return;
|
||||
}
|
||||
|
||||
printf("setup env for recovery..\n");
|
||||
setenv("bootcmd", "run bootcmd_android_recovery");
|
||||
}
|
||||
#endif /*CONFIG_ANDROID_RECOVERY*/
|
||||
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#include <libfdt.h>
|
||||
#include <spl.h>
|
||||
|
||||
@ -32,6 +32,13 @@
|
||||
#endif
|
||||
#include <asm/imx-common/video.h>
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
#include <fsl_fastboot.h>
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
#include <recovery.h>
|
||||
#endif
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
|
||||
@ -1038,3 +1045,89 @@ int checkboard(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_FASTBOOT
|
||||
void board_fastboot_setup(void)
|
||||
{
|
||||
switch (get_boot_device()) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc0");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc0");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("fastboot_dev"))
|
||||
setenv("fastboot_dev", "mmc1");
|
||||
if (!getenv("bootcmd"))
|
||||
setenv("bootcmd", "boota mmc1");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("unsupported boot devices\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ANDROID_RECOVERY
|
||||
|
||||
/* Use S3 button for recovery key */
|
||||
#define GPIO_VOL_DN_KEY IMX_GPIO_NR(5, 10)
|
||||
iomux_v3_cfg_t const recovery_key_pads[] = {
|
||||
(MX7D_PAD_SD2_WP__GPIO5_IO10 | MUX_PAD_CTRL(BUTTON_PAD_CTRL)),
|
||||
};
|
||||
|
||||
int check_recovery_cmd_file(void)
|
||||
{
|
||||
int button_pressed = 0;
|
||||
int recovery_mode = 0;
|
||||
|
||||
recovery_mode = recovery_check_and_clean_flag();
|
||||
|
||||
/* Check Recovery Combo Button press or not. */
|
||||
imx_iomux_v3_setup_multiple_pads(recovery_key_pads,
|
||||
ARRAY_SIZE(recovery_key_pads));
|
||||
|
||||
gpio_direction_input(GPIO_VOL_DN_KEY);
|
||||
|
||||
if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { /* VOL_DN key is low assert */
|
||||
button_pressed = 1;
|
||||
printf("Recovery key pressed\n");
|
||||
}
|
||||
|
||||
return recovery_mode || button_pressed;
|
||||
}
|
||||
|
||||
void board_recovery_setup(void)
|
||||
{
|
||||
int bootdev = get_boot_device();
|
||||
|
||||
switch (bootdev) {
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
|
||||
case SD1_BOOT:
|
||||
case MMC1_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc0 recovery");
|
||||
break;
|
||||
case SD3_BOOT:
|
||||
case MMC3_BOOT:
|
||||
if (!getenv("bootcmd_android_recovery"))
|
||||
setenv("bootcmd_android_recovery", "boota mmc1 recovery");
|
||||
break;
|
||||
#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
|
||||
default:
|
||||
printf("Unsupported bootup device for recovery: dev: %d\n",
|
||||
bootdev);
|
||||
return;
|
||||
}
|
||||
|
||||
printf("setup env for recovery..\n");
|
||||
setenv("bootcmd", "run bootcmd_android_recovery");
|
||||
}
|
||||
#endif /*CONFIG_ANDROID_RECOVERY*/
|
||||
|
||||
#endif /*CONFIG_FSL_FASTBOOT*/
|
||||
|
||||
|
||||
5
configs/mx6dlsabreautoandroid_defconfig
Normal file
5
configs/mx6dlsabreautoandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6dlsabreautoandroid_nand_defconfig
Normal file
5
configs/mx6dlsabreautoandroid_nand_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL,SYS_BOOT_NAND,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6dlsabresdandroid_defconfig
Normal file
5
configs/mx6dlsabresdandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SABRESD=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL,SYS_USE_SPINOR,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6qpsabreautoandroid_defconfig
Normal file
5
configs/mx6qpsabreautoandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6qp.cfg,MX6Q,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6qpsabreautoandroid_nand_defconfig
Normal file
5
configs/mx6qpsabreautoandroid_nand_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6qp.cfg,MX6Q,SYS_BOOT_NAND,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6qpsabresdandroid_defconfig
Normal file
5
configs/mx6qpsabresdandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SABRESD=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6qp.cfg,MX6Q,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6qsabreautoandroid_defconfig
Normal file
5
configs/mx6qsabreautoandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6qsabreautoandroid_nand_defconfig
Normal file
5
configs/mx6qsabreautoandroid_nand_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q,SYS_BOOT_NAND,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6qsabresdandroid_defconfig
Normal file
5
configs/mx6qsabresdandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SABRESD=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q,SYS_USE_SPINOR,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
7
configs/mx6slevkandroid_defconfig
Normal file
7
configs/mx6slevkandroid_defconfig
Normal file
@ -0,0 +1,7 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SLEVK=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
5
configs/mx6solosabreautoandroid_defconfig
Normal file
5
configs/mx6solosabreautoandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6solo.cfg,MX6SOLO,SYS_NOSMP=\"nosmp\",ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6solosabreautoandroid_nand_defconfig
Normal file
5
configs/mx6solosabreautoandroid_nand_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6QSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6solo.cfg,MX6SOLO,SYS_NOSMP=\"nosmp\",SYS_BOOT_NAND,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6solosabresdandroid_defconfig
Normal file
5
configs/mx6solosabresdandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SABRESD=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg,MX6SOLO,SYS_USE_SPINOR,SYS_NOSMP=\"nosmp\",ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6sxsabreautoandroid_defconfig
Normal file
5
configs/mx6sxsabreautoandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SXSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6sxsabreautoandroid_nand_defconfig
Normal file
5
configs/mx6sxsabreautoandroid_nand_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SXSABREAUTO=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX,SYS_BOOT_NAND,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
5
configs/mx6sxsabresdandroid_defconfig
Normal file
5
configs/mx6sxsabresdandroid_defconfig
Normal file
@ -0,0 +1,5 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6SXSABRESD=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
7
configs/mx6ul_14x14_evk_android_defconfig
Normal file
7
configs/mx6ul_14x14_evk_android_defconfig
Normal file
@ -0,0 +1,7 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6UL_14X14_EVK=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ul_14x14_evk/imximage.cfg,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_PING=y
|
||||
9
configs/mx7dsabresdandroid_defconfig
Normal file
9
configs/mx7dsabresdandroid_defconfig
Normal file
@ -0,0 +1,9 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX7=y
|
||||
CONFIG_TARGET_MX7DSABRESD=y
|
||||
CONFIG_IMX_RDC=y
|
||||
CONFIG_IMX_BOOTAUX=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg,ANDROID_SUPPORT"
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_PING=y
|
||||
@ -403,6 +403,10 @@
|
||||
#define CONFIG_IMX_HDMI
|
||||
#define CONFIG_IMX_VIDEO_SKIP
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx6sabreandroid_common.h"
|
||||
#else
|
||||
|
||||
#ifndef CONFIG_SPL
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
@ -418,12 +422,6 @@
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||
#define CONFIG_CMD_FASTBOOT
|
||||
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||
#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
|
||||
|
||||
/* USB Device Firmware Update support */
|
||||
#define CONFIG_CMD_DFU
|
||||
#define CONFIG_USB_FUNCTION_DFU
|
||||
@ -433,4 +431,6 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_ANDROID_SUPPORT */
|
||||
|
||||
#endif /* __MX6QSABRE_COMMON_CONFIG_H */
|
||||
|
||||
67
include/configs/mx6sabreandroid_common.h
Normal file
67
include/configs/mx6sabreandroid_common.h
Normal file
@ -0,0 +1,67 @@
|
||||
/*
|
||||
* Copyright (C) 2013-2016 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef MX6_SABRE_ANDROID_COMMON_H
|
||||
#define MX6_SABRE_ANDROID_COMMON_H
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x18d1
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||
#define CONFIG_CMD_FASTBOOT
|
||||
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||
#define CONFIG_FASTBOOT_FLASH
|
||||
|
||||
#define CONFIG_FSL_FASTBOOT
|
||||
#define CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#if defined CONFIG_SYS_BOOT_NAND
|
||||
#define CONFIG_FASTBOOT_STORAGE_NAND
|
||||
#elif defined CONFIG_SYS_BOOT_SATA
|
||||
#define CONFIG_FASTBOOT_STORAGE_SATA
|
||||
#define CONFIG_FASTBOOT_SATA_NO 0
|
||||
#else
|
||||
#define CONFIG_FASTBOOT_STORAGE_MMC
|
||||
#endif
|
||||
|
||||
#define CONFIG_ANDROID_MAIN_MMC_BUS 2
|
||||
#define CONFIG_ANDROID_BOOT_PARTITION_MMC 1
|
||||
#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 5
|
||||
#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 2
|
||||
#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
|
||||
#define CONFIG_ANDROID_DATA_PARTITION_MMC 4
|
||||
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
#define ANDROID_FASTBOOT_NAND_PARTS "16m@64m(boot) 16m@80m(recovery) 810m@96m(android_root)ubifs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_CMD_BOOTA
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
#define CONFIG_SERIAL_TAG
|
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"splashpos=m,m\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
|
||||
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||
#define CONFIG_FASTBOOT_BUF_SIZE 0x19000000
|
||||
|
||||
#endif /* MX6_SABRE_ANDROID_COMMON_H */
|
||||
@ -254,4 +254,8 @@
|
||||
#endif
|
||||
#endif /* CONFIG_SPLASH_SCREEN */
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx6slevkandroid.h"
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
74
include/configs/mx6slevkandroid.h
Normal file
74
include/configs/mx6slevkandroid.h
Normal file
@ -0,0 +1,74 @@
|
||||
|
||||
/*
|
||||
* Copyright (C) 2013-2016 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef MX6SL_EVK_ANDROID_H
|
||||
#define MX6SL_EVK_ANDROID_H
|
||||
|
||||
#include <asm/imx-common/mxc_key_defs.h>
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x18d1
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||
#define CONFIG_CMD_FASTBOOT
|
||||
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||
#define CONFIG_FASTBOOT_FLASH
|
||||
|
||||
#define CONFIG_FSL_FASTBOOT
|
||||
#define CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#define CONFIG_FASTBOOT_STORAGE_MMC
|
||||
|
||||
#define CONFIG_ANDROID_MAIN_MMC_BUS 2
|
||||
#define CONFIG_ANDROID_BOOT_PARTITION_MMC 1
|
||||
#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 5
|
||||
#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 2
|
||||
#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
|
||||
#define CONFIG_ANDROID_DATA_PARTITION_MMC 4
|
||||
|
||||
#define CONFIG_CMD_BOOTA
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
#define CONFIG_SERIAL_TAG
|
||||
|
||||
/*keyboard mapping*/
|
||||
#define CONFIG_VOL_DOWN_KEY KEY_BACK
|
||||
#define CONFIG_POWER_KEY KEY_5
|
||||
|
||||
#define CONFIG_MXC_KPD
|
||||
#define CONFIG_MXC_KEYMAPPING \
|
||||
{ \
|
||||
KEY_SELECT, KEY_BACK, KEY_1, KEY_2, \
|
||||
KEY_3, KEY_4, KEY_5, KEY_MENU, \
|
||||
KEY_6, KEY_7, KEY_8, KEY_9, \
|
||||
KEY_UP, KEY_LEFT, KEY_RIGHT, KEY_DOWN, \
|
||||
}
|
||||
#define CONFIG_MXC_KPD_COLMAX 4
|
||||
#define CONFIG_MXC_KPD_ROWMAX 4
|
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"splashpos=m,m\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
|
||||
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||
#define CONFIG_FASTBOOT_BUF_SIZE 0x19000000
|
||||
|
||||
#endif
|
||||
@ -345,4 +345,8 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx6sxsabreautoandroid.h"
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
65
include/configs/mx6sxsabreautoandroid.h
Normal file
65
include/configs/mx6sxsabreautoandroid.h
Normal file
@ -0,0 +1,65 @@
|
||||
|
||||
/*
|
||||
* Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __MX6SX_SABREAUTO_ANDROID_H
|
||||
#define __MX6SX_SABREAUTO_ANDROID_H
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x18d1
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||
#define CONFIG_CMD_FASTBOOT
|
||||
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||
#define CONFIG_FASTBOOT_FLASH
|
||||
|
||||
#define CONFIG_FSL_FASTBOOT
|
||||
#define CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#if defined CONFIG_SYS_BOOT_NAND
|
||||
#define CONFIG_FASTBOOT_STORAGE_NAND
|
||||
#else
|
||||
#define CONFIG_FASTBOOT_STORAGE_MMC
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
#define ANDROID_FASTBOOT_NAND_PARTS "16m@64m(boot) 16m@80m(recovery) 810m@96m(android_root)ubifs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_ANDROID_MAIN_MMC_BUS 2
|
||||
#define CONFIG_ANDROID_BOOT_PARTITION_MMC 1
|
||||
#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 5
|
||||
#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 2
|
||||
#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
|
||||
#define CONFIG_ANDROID_DATA_PARTITION_MMC 4
|
||||
|
||||
#define CONFIG_CMD_BOOTA
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
#define CONFIG_SERIAL_TAG
|
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"splashpos=m,m\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
|
||||
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||
#define CONFIG_FASTBOOT_BUF_SIZE 0x19000000
|
||||
|
||||
#endif
|
||||
@ -321,4 +321,8 @@
|
||||
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx6sxsabresdandroid.h"
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
58
include/configs/mx6sxsabresdandroid.h
Normal file
58
include/configs/mx6sxsabresdandroid.h
Normal file
@ -0,0 +1,58 @@
|
||||
|
||||
/*
|
||||
* Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __MX6SX_SABRESD_ANDROID_H
|
||||
#define __MX6SX_SABRESD_ANDROID_H
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x18d1
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||
#define CONFIG_CMD_FASTBOOT
|
||||
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||
#define CONFIG_FASTBOOT_FLASH
|
||||
|
||||
#define CONFIG_FSL_FASTBOOT
|
||||
#define CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#define CONFIG_FASTBOOT_STORAGE_MMC
|
||||
|
||||
#define CONFIG_ANDROID_MAIN_MMC_BUS 2
|
||||
#define CONFIG_ANDROID_BOOT_PARTITION_MMC 1
|
||||
#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 5
|
||||
#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 2
|
||||
#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
|
||||
#define CONFIG_ANDROID_DATA_PARTITION_MMC 4
|
||||
|
||||
#define CONFIG_CMD_BOOTA
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
#define CONFIG_SERIAL_TAG
|
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"splashpos=m,m\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
|
||||
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||
#define CONFIG_FASTBOOT_BUF_SIZE 0x19000000
|
||||
|
||||
|
||||
#endif
|
||||
@ -365,4 +365,8 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx6ul_14x14_evk_android.h"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
65
include/configs/mx6ul_14x14_evk_android.h
Normal file
65
include/configs/mx6ul_14x14_evk_android.h
Normal file
@ -0,0 +1,65 @@
|
||||
|
||||
/*
|
||||
* Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __MX6UL_EVK_ANDROID_H
|
||||
#define __MX6UL_EVK_ANDROID_H
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x18d1
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||
#define CONFIG_CMD_FASTBOOT
|
||||
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||
#define CONFIG_FASTBOOT_FLASH
|
||||
|
||||
#define CONFIG_FSL_FASTBOOT
|
||||
#define CONFIG_ANDROID_RECOVERY
|
||||
|
||||
#if defined CONFIG_SYS_BOOT_NAND
|
||||
#define CONFIG_FASTBOOT_STORAGE_NAND
|
||||
#else
|
||||
#define CONFIG_FASTBOOT_STORAGE_MMC
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
|
||||
#define ANDROID_FASTBOOT_NAND_PARTS "16m@64m(boot) 16m@80m(recovery) 810m@96m(android_root)ubifs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_ANDROID_MAIN_MMC_BUS 2
|
||||
#define CONFIG_ANDROID_BOOT_PARTITION_MMC 1
|
||||
#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 5
|
||||
#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 2
|
||||
#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
|
||||
#define CONFIG_ANDROID_DATA_PARTITION_MMC 4
|
||||
|
||||
#define CONFIG_CMD_BOOTA
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
#define CONFIG_SERIAL_TAG
|
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"splashpos=m,m\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
|
||||
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||
#define CONFIG_FASTBOOT_BUF_SIZE 0x19000000
|
||||
|
||||
#endif
|
||||
@ -333,26 +333,6 @@
|
||||
|
||||
#define CONFIG_IMX_THERMAL
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
/* USB Device Firmware Update support */
|
||||
#define CONFIG_CMD_DFU
|
||||
#define CONFIG_USB_FUNCTION_DFU
|
||||
#define CONFIG_DFU_MMC
|
||||
#define CONFIG_DFU_RAM
|
||||
|
||||
#define CONFIG_CMD_BMODE
|
||||
|
||||
#define CONFIG_VIDEO
|
||||
@ -399,4 +379,28 @@
|
||||
#error "EPDC Pins conflicts QSPI, Either EPDC or QSPI can be enabled!"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx7dsabresdandroid.h"
|
||||
#else
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
/* USB Device Firmware Update support */
|
||||
#define CONFIG_CMD_DFU
|
||||
#define CONFIG_USB_FUNCTION_DFU
|
||||
#define CONFIG_DFU_MMC
|
||||
#define CONFIG_DFU_RAM
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
58
include/configs/mx7dsabresdandroid.h
Normal file
58
include/configs/mx7dsabresdandroid.h
Normal file
@ -0,0 +1,58 @@
|
||||
|
||||
/*
|
||||
* Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __MX7D_SABRESD_ANDROID_H
|
||||
#define __MX7D_SABRESD_ANDROID_H
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x18d1
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02
|
||||
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||
|
||||
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||
#define CONFIG_CMD_FASTBOOT
|
||||
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||
#define CONFIG_FASTBOOT_FLASH
|
||||
|
||||
#define CONFIG_FSL_FASTBOOT
|
||||
#define CONFIG_ANDROID_RECOVERY
|
||||
#define CONFIG_FASTBOOT_STORAGE_MMC
|
||||
|
||||
#define CONFIG_ANDROID_MAIN_MMC_BUS 2
|
||||
#define CONFIG_ANDROID_BOOT_PARTITION_MMC 1
|
||||
#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 5
|
||||
#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 2
|
||||
#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
|
||||
#define CONFIG_ANDROID_DATA_PARTITION_MMC 4
|
||||
|
||||
#define CONFIG_CMD_BOOTA
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
#define CONFIG_SERIAL_TAG
|
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"splashpos=m,m\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
|
||||
|
||||
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||
#define CONFIG_FASTBOOT_BUF_SIZE 0x19000000
|
||||
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user