i2S-6ULL: rework config file
The i2som_comm contains the variables of i2som. The i2s6ull_comm contains the variables of i2S-6ULL SOM.
This commit is contained in:
SteveChen
373
include/configs/i2s6ull_common.h
Normal file
373
include/configs/i2s6ull_common.h
Normal file
@ -0,0 +1,373 @@
|
||||
/*
|
||||
* Copyright (C) 2017 i2SOM Team.
|
||||
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Configuration settings for the i2SOM i2S-6ULL System-On-Module.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
#ifndef I2S_6ULL_CONFIG_H
|
||||
#define I2S_6ULL_CONFIG_H
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/imx-common/gpio.h>
|
||||
/*#include <config_cmd_default.h>*/
|
||||
#include <linux/sizes.h>
|
||||
#include "mx6_common.h"
|
||||
#include "i2som_common.h"
|
||||
|
||||
#define CONFIG_SOM_DESCRIPTION "i2SOM i2S-6ULL"
|
||||
|
||||
/*#define CONFIG_ROM_UNIFIED_SECTIONS
|
||||
#define CONFIG_SYS_GENERIC_BOARD*/
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
||||
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
/*
|
||||
* RAM
|
||||
*/
|
||||
#define CONFIG_LOADADDR 0x80800000
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_SYS_TEXT_BASE 0x87800000
|
||||
/* RAM memory reserved for U-Boot, stack, malloc pool... */
|
||||
#define CONFIG_UBOOT_RESERVED (10 * 1024 * 1024)
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
|
||||
|
||||
/* memtest
|
||||
#define CONFIG_CMD_MEMTEST
|
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
|
||||
((CONFIG_DDR_MB * SZ_1M) >> 1))
|
||||
*/
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
#define CONFIG_MXC_GPIO
|
||||
|
||||
/* Fuse */
|
||||
#define CONFIG_CMD_FUSE
|
||||
#ifdef CONFIG_CMD_FUSE
|
||||
#define CONFIG_MXC_OCOTP
|
||||
#endif
|
||||
|
||||
/* HWID */
|
||||
#define CONFIG_HAS_HWID
|
||||
#define CONFIG_HWID_BANK 4
|
||||
#define CONFIG_HWID_START_WORD 2
|
||||
#define CONFIG_HWID_WORDS_NUMBER 2
|
||||
#define CONFIG_HWID_LOCK_FUSE (1 << 8)
|
||||
#define CONFIG_MANUF_STRINGS_HELP "<LYYWWGGXXXXXX> <VVHC> <K>"
|
||||
|
||||
#define OCOTP_LOCK_BANK 0
|
||||
#define OCOTP_LOCK_WORD 0
|
||||
|
||||
#define CONFIG_MODULE_FUSE
|
||||
#define CONFIG_OF_SYSTEM_SETUP
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_QSPI
|
||||
/* i2S-6ULL QSPI+eMMC variant */
|
||||
#define CONFIG_FSL_QSPI
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
|
||||
#elif defined(CONFIG_SYS_BOOT_NAND)
|
||||
/* i2S-6ULL NAND variant */
|
||||
#define CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
#define CONFIG_MTD_DEVICE
|
||||
#define CONFIG_MTD_PARTITIONS
|
||||
#define CONFIG_CMD_BOOTSTREAM
|
||||
#define CONFIG_CMD_UPDATE_NAND
|
||||
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
|
||||
#define CONFIG_SYS_MMC_ENV_PART 1 /* user area */
|
||||
|
||||
#elif defined(CONFIG_SYS_BOOT_EMMC)
|
||||
/* i2S-6ULL eMMC variant */
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
|
||||
#define CONFIG_SYS_MMC_ENV_PART 1 /* user area */
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENV_IS_IN_MMC)
|
||||
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
|
||||
#define CONFIG_ENV_SIZE SZ_8K
|
||||
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
|
||||
#define CONFIG_ENV_OFFSET (768 * 1024)
|
||||
#define CONFIG_ENV_SIZE SZ_8K
|
||||
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
||||
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
||||
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
||||
#elif defined(CONFIG_ENV_IS_IN_NAND)
|
||||
#define CONFIG_ENV_OFFSET (SZ_1M * 5)
|
||||
#define CONFIG_ENV_SECT_SIZE SZ_1M
|
||||
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
||||
#endif
|
||||
|
||||
|
||||
/* MMC Configs */
|
||||
#define CONFIG_FSL_USDHC
|
||||
#ifdef CONFIG_FSL_USDHC
|
||||
#define CONFIG_FSL_ESDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_CMD_FS_GENERIC
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_EXT4
|
||||
#define CONFIG_CMD_EXT4_WRITE
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_FAT_WRITE
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_EFI_PARTITION
|
||||
#define CONFIG_CMD_GPT
|
||||
#define CONFIG_PARTITION_UUIDS
|
||||
#define CONFIG_CMD_PART
|
||||
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
||||
|
||||
|
||||
/* NAND pin conflicts with usdhc2 */
|
||||
#ifdef CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
||||
#else
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||
#endif
|
||||
|
||||
/* NAND stuff */
|
||||
#if defined(CONFIG_SYS_USE_NAND)
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_NAND_TRIMFFS
|
||||
|
||||
#define CONFIG_NAND_MXS
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
|
||||
/* UBI and UBIFS support */
|
||||
#define CONFIG_CMD_UBI
|
||||
#define CONFIG_RBTREE
|
||||
#define CONFIG_CMD_UBIFS
|
||||
#define CONFIG_LZO
|
||||
|
||||
/* DMA stuff, needed for GPMI/MXS NAND support */
|
||||
#define CONFIG_APBH_DMA
|
||||
#define CONFIG_APBH_DMA_BURST
|
||||
#define CONFIG_APBH_DMA_BURST8
|
||||
#endif
|
||||
|
||||
/* QSPI Flash */
|
||||
#ifdef CONFIG_FSL_QSPI
|
||||
#define CONFIG_QSPI_BASE QSPI0_BASE_ADDR
|
||||
#define CONFIG_QSPI_MEMMAP_BASE QSPI0_AMBA_BASE
|
||||
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_SPI_FLASH
|
||||
#define CONFIG_SPI_FLASH_BAR
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 40000000
|
||||
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
||||
#define CONFIG_SPI_FLASH_STMICRO
|
||||
#endif
|
||||
|
||||
/* Ethernet */
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_FEC_MXC
|
||||
#define CONFIG_MII
|
||||
#define CONFIG_ETHPRIME "FEC"
|
||||
#define CONFIG_NO_MAC_FROM_OTP
|
||||
#define CONFIG_PHYLIB
|
||||
#define CONFIG_PHY_SMSC
|
||||
#define CONFIG_FEC_DMA_MINALIGN 64
|
||||
#define CONFIG_FEC_ENET_DEV 0
|
||||
|
||||
#if (CONFIG_FEC_ENET_DEV == 0)
|
||||
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x0
|
||||
#define CONFIG_FEC_XCV_TYPE RMII
|
||||
#elif (CONFIG_FEC_ENET_DEV == 1)
|
||||
#define IMX_FEC_BASE ENET2_BASE_ADDR
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x1
|
||||
#define CONFIG_FEC_XCV_TYPE RMII
|
||||
#endif
|
||||
|
||||
#endif /* endif CONFIG_CMD_NET */
|
||||
|
||||
/* Extra network settings for second Ethernet */
|
||||
#define CONFIG_EXTRA_NETWORK_SETTINGS \
|
||||
"eth1addr=" DEFAULT_MAC_ETHADDR1 "\0"
|
||||
|
||||
#define CONFIG_ENV_FLAGS_LIST_STATIC \
|
||||
"eth1addr:mc," \
|
||||
"bootargs_once:sr," \
|
||||
"board_version:so," \
|
||||
"board_id:so,"
|
||||
|
||||
/*#define CONFIG_OF_LIBFDT
|
||||
#define CONFIG_OF_BOARD_SETUP*/
|
||||
|
||||
#define CONFIG_CMD_BMODE
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
/*#undef CONFIG_CMD_IMLS
|
||||
#define CONFIG_CMD_SETEXPR
|
||||
*/
|
||||
#ifndef CONFIG_SYS_DCACHE_OFF
|
||||
#define CONFIG_CMD_CACHE
|
||||
#endif
|
||||
|
||||
/* I2C configs */
|
||||
/*#define CONFIG_CMD_I2C*/
|
||||
#ifdef CONFIG_CMD_I2C
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_MXC
|
||||
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
||||
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
|
||||
/* PMIC only for 9X9 EVK */
|
||||
#define CONFIG_POWER
|
||||
#define CONFIG_POWER_I2C
|
||||
#define CONFIG_POWER_PFUZE3000
|
||||
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
|
||||
|
||||
#endif /* endif CONFIG_CMD_I2C */
|
||||
|
||||
/* USB Configs */
|
||||
#define CONFIG_CMD_USB
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_MX6
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||
#define CONFIG_MXC_USB_FLAGS 0
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||
#endif /* endif CONFIG_CMD_USB */
|
||||
|
||||
/* MTD (NAND) */
|
||||
#define CONFIG_SKIP_NAND_BBT_SCAN
|
||||
#define CONFIG_UBOOT_PARTITION "bootloader"
|
||||
#define CONFIG_LINUX_PARTITION "linux"
|
||||
#define CONFIG_RECOVERY_PARTITION "recovery"
|
||||
#define CONFIG_NAND_NAME "gpmi-nand"
|
||||
#define MTDIDS_DEFAULT "nand0=" CONFIG_NAND_NAME
|
||||
#define MTDPARTS_256MB "mtdparts=" CONFIG_NAND_NAME ":" \
|
||||
"5m(" CONFIG_UBOOT_PARTITION ")," \
|
||||
"1m(env)," \
|
||||
"1m(safe)," \
|
||||
"16m(" CONFIG_LINUX_PARTITION ")," \
|
||||
"16m(" CONFIG_RECOVERY_PARTITION ")," \
|
||||
"150m(rootfs)," \
|
||||
"-(data)"
|
||||
#define MTDPARTS_512MB "mtdparts=" CONFIG_NAND_NAME ":" \
|
||||
"5m(" CONFIG_UBOOT_PARTITION ")," \
|
||||
"1m(env)," \
|
||||
"1m(safe)," \
|
||||
"16m(" CONFIG_LINUX_PARTITION ")," \
|
||||
"16m(" CONFIG_RECOVERY_PARTITION ")," \
|
||||
"200m(rootfs)," \
|
||||
"-(data)"
|
||||
#define CONFIG_ENV_MTD_LINUX_INDEX "3"
|
||||
#define CONFIG_ENV_MTD_RECOVERY_INDEX "4"
|
||||
#define CONFIG_ENV_MTD_ROOTFS_INDEX "5"
|
||||
#define CONFIG_ENV_MTD_UPDATE_INDEX "6"
|
||||
#define CONFIG_ENV_MTD_SETTINGS "mtdids=" MTDIDS_DEFAULT "\0"
|
||||
|
||||
/* Max percentage of reserved blocks for bad block management per partition */
|
||||
#define CONFIG_MTD_UBI_MAXRSVDPEB_PCNT 4
|
||||
|
||||
/* Supported sources for update */
|
||||
#define CONFIG_SUPPORTED_SOURCES ((1 << SRC_TFTP) | \
|
||||
(1 << SRC_NFS) | \
|
||||
(1 << SRC_MMC) | \
|
||||
(1 << SRC_NAND) | \
|
||||
(1 << SRC_RAM))
|
||||
#define CONFIG_SUPPORTED_SOURCES_NET "tftp|nfs"
|
||||
#define CONFIG_SUPPORTED_SOURCES_BLOCK "mmc"
|
||||
#define CONFIG_SUPPORTED_SOURCES_NAND "nand"
|
||||
#define CONFIG_SUPPORTED_SOURCES_RAM "ram"
|
||||
|
||||
/* i2SOM boot command 'dboot' */
|
||||
#define CONFIG_CMD_DBOOT
|
||||
#define CONFIG_DBOOT_BOOTCOMMAND "bootz"
|
||||
#define CONFIG_DBOOT_DEFAULTKERNELVAR "zimage"
|
||||
#define CONFIG_DBOOT_SUPPORTED_SOURCES_LIST \
|
||||
CONFIG_SUPPORTED_SOURCES_NET "|" \
|
||||
CONFIG_SUPPORTED_SOURCES_NAND "|" \
|
||||
CONFIG_SUPPORTED_SOURCES_BLOCK
|
||||
#define CONFIG_DBOOT_SUPPORTED_SOURCES_ARGS_HELP \
|
||||
I2SOMCMD_DBOOT_NET_ARGS_HELP "\n" \
|
||||
I2SOMCMD_DBOOT_NAND_ARGS_HELP "\n" \
|
||||
I2SOMCMD_DBOOT_BLOCK_ARGS_HELP
|
||||
|
||||
/* Firmware update */
|
||||
#define CONFIG_UPDATE_SUPPORTED_SOURCES_LIST \
|
||||
CONFIG_SUPPORTED_SOURCES_NET "|" \
|
||||
CONFIG_SUPPORTED_SOURCES_BLOCK "|" \
|
||||
CONFIG_SUPPORTED_SOURCES_RAM
|
||||
#define CONFIG_UPDATE_SUPPORTED_SOURCES_ARGS_HELP \
|
||||
I2SOMCMD_UPDATE_NET_ARGS_HELP "\n" \
|
||||
I2SOMCMD_UPDATE_BLOCK_ARGS_HELP "\n" \
|
||||
I2SOMCMD_UPDATE_RAM_ARGS_HELP
|
||||
#define CONFIG_UPDATEFILE_SUPPORTED_SOURCES_ARGS_HELP \
|
||||
I2SOMCMD_UPDATEFILE_NET_ARGS_HELP "\n" \
|
||||
I2SOMCMD_UPDATEFILE_BLOCK_ARGS_HELP "\n" \
|
||||
I2SOMCMD_UPDATEFILE_RAM_ARGS_HELP
|
||||
#define CONFIG_OTF_CHUNK (32 * 1024 * 1024)
|
||||
|
||||
/* Miscellaneous configurable options
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT "=> "
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_CBSIZE 1024
|
||||
#define CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC
|
||||
*/
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
|
||||
#undef CONFIG_BOOTM_NETBSD
|
||||
#undef CONFIG_BOOTM_PLAN9
|
||||
#undef CONFIG_BOOTM_RTEMS
|
||||
#undef CONFIG_CMD_EXPORTENV
|
||||
#undef CONFIG_CMD_IMPORTENV
|
||||
|
||||
#endif /* I2S6ULL_CONFIG_H */
|
||||
@ -1,18 +1,15 @@
|
||||
/*
|
||||
* Copyright (C) 2017 i2SOM Team.
|
||||
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
|
||||
* Configuration settings for the i2SOM i2S-6ULL NAND SoM on i2C-6ULX-B carrier board.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
#ifndef __I2SOM_IMX6ULL_14X14_CONFIG_H
|
||||
#define __I2SOM_IMX6ULL_14X14_CONFIG_H
|
||||
#ifndef __I2C_6ULXB_14X14_CONFIG_H
|
||||
#define __I2C_6ULXB_14X14_CONFIG_H
|
||||
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <linux/sizes.h>
|
||||
#include "mx6_common.h"
|
||||
#include <asm/imx-common/gpio.h>
|
||||
#include "i2s6ull_common.h"
|
||||
|
||||
/* uncomment for PLUGIN mode support */
|
||||
/* #define CONFIG_USE_PLUGIN */
|
||||
@ -32,7 +29,12 @@
|
||||
#define PHYS_SDRAM_SIZE SZ_256M
|
||||
#define CONFIG_BOOTARGS_CMA_SIZE "cma=96M "
|
||||
#else
|
||||
|
||||
#if (CONFIG_DDR_SIZE == 512)
|
||||
#define PHYS_SDRAM_SIZE SZ_512M
|
||||
#elif (CONFIG_DDR_SIZE == 256)
|
||||
#define PHYS_SDRAM_SIZE SZ_256M
|
||||
#endif
|
||||
#define CONFIG_BOOTARGS_CMA_SIZE ""
|
||||
/* DCDC used on 14x14 EVK, no PMIC */
|
||||
#undef CONFIG_LDO_BYPASS_CHECK
|
||||
@ -45,53 +47,25 @@
|
||||
* #include "imx6_spl.h"
|
||||
*/
|
||||
|
||||
/* RAM memory reserved for U-Boot, stack, malloc pool... */
|
||||
#define CONFIG_UBOOT_RESERVED (10 * 1024 * 1024)
|
||||
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
|
||||
#define CONFIG_MXC_UART
|
||||
#define CONFIG_MXC_UART_BASE UART1_BASE
|
||||
|
||||
/* MMC Configs */
|
||||
#ifdef CONFIG_FSL_USDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
|
||||
|
||||
/* NAND pin conflicts with usdhc2 */
|
||||
#ifdef CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
||||
#else
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* I2C configs */
|
||||
#define CONFIG_CMD_I2C
|
||||
#ifdef CONFIG_CMD_I2C
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_MXC
|
||||
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
||||
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
|
||||
/* PMIC only for 9X9 EVK */
|
||||
#define CONFIG_POWER
|
||||
#define CONFIG_POWER_I2C
|
||||
#define CONFIG_POWER_PFUZE3000
|
||||
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_CONSOLE_PORT "ttymxc0"
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_NAND
|
||||
/* i2S-6ULL NAND Variant */
|
||||
#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:5m(boot),10m(kernel),1m(dtb),-(rootfs) "
|
||||
#define CONFIG_SYS_STORAGE_MEDIA "nand"
|
||||
#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:" \
|
||||
"5m(bootloader),1m(env),1m(safe)," \
|
||||
"16m(linux)," \
|
||||
"16m(recovery)," \
|
||||
"150m(rootfs)," \
|
||||
"-(data) "
|
||||
#define CONFIG_FDT_FILE "findfdt="\
|
||||
"if test $fdt_file = undefined; then " \
|
||||
"if test $board_name = I2S-6ULL-NAND && test $board_rev = 9X9; then " \
|
||||
@ -101,7 +75,7 @@
|
||||
"if test $fdt_file = undefined; then " \
|
||||
"echo WARNING: Could not determine dtb to use; fi; " \
|
||||
"fi;\0"
|
||||
#else
|
||||
#elif defined(CONFIG_SYS_BOOT_EMMC)
|
||||
/* i2S-6ULL eMMC Variant */
|
||||
#define CONFIG_MFG_NAND_PARTITION ""
|
||||
#define CONFIG_FDT_FILE "findfdt="\
|
||||
@ -130,33 +104,57 @@
|
||||
"initrd_addr=0x83800000\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
|
||||
"" /* end line */
|
||||
|
||||
#if defined(CONFIG_SYS_BOOT_NAND)
|
||||
/* i2S-6ULL NAND Variant */
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
CONFIG_MFG_ENV_SETTINGS \
|
||||
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
||||
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
||||
"fdt_file=zImage-i2c-b6ull-nand.dtb\0" \
|
||||
"panel=TFT43AB\0" \
|
||||
"fdt_addr=0x83000000\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"bootargs=console=ttymxc0,115200 ubi.mtd=3 " \
|
||||
"root=ubi0:rootfs rootfstype=ubifs " \
|
||||
CONFIG_BOOTARGS_CMA_SIZE \
|
||||
"mtdparts=gpmi-nand:5m(boot),10m(kernel),1m(dtb),-(rootfs)\0"\
|
||||
"bootcmd=nand read ${loadaddr} 0x500000 0xA00000;"\
|
||||
"nand read ${fdt_addr} 0xF00000 0x100000;"\
|
||||
"bootz ${loadaddr} - ${fdt_addr}\0"
|
||||
"mtdids=nand0=gpmi-nand\0" \
|
||||
"zimage=zImage-i2c-b6ull.bin\0" \
|
||||
"bootargs=console=ttymxc0,115200 ubi.mtd=5 " \
|
||||
"root=ubi0:rootfs rootfstype=ubifs " \
|
||||
CONFIG_BOOTARGS_CMA_SIZE "\0" \
|
||||
"mtdparts=gpmi-nand:" \
|
||||
"5m(bootloader),1m(env),1m(safe)," \
|
||||
"16m(linux)," \
|
||||
"16m(recovery)," \
|
||||
"150m(rootfs)," \
|
||||
"-(data) \0"
|
||||
#ifdef CONFIG_SDCARD
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"mmc dev ${mmcdev};" \
|
||||
"if mmc rescan; then " \
|
||||
"if fatload mmc 0:1 ${loadaddr} boot.scr; then " \
|
||||
"source ${loadaddr}; " \
|
||||
"fi; " \
|
||||
"fi"
|
||||
|
||||
#else
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"ubi part linux && ubifsmount ubi0:linux && " \
|
||||
"ubifsload ${loadaddr} ${zimage} && " \
|
||||
"ubifsload ${fdt_addr} ${fdt_file} && " \
|
||||
"bootz ${loadaddr} - ${fdt_addr}"
|
||||
|
||||
#endif
|
||||
#elif defined(CONFIG_SYS_BOOT_EMMC)
|
||||
/* i2S-6ULL eMMC Variant */
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
CONFIG_MFG_ENV_SETTINGS \
|
||||
"script=boot.scr\0" \
|
||||
"image=zImage-i2c-b6ull.bin\0" \
|
||||
"zimage=zImage-i2c-b6ull.bin\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"fdt_file=undefined\0" \
|
||||
"fdt_file=zImage-i2c-b6ull-emmc.dtb\0" \
|
||||
"fdt_addr=0x83000000\0" \
|
||||
"boot_fdt=try\0" \
|
||||
"ip_dyn=yes\0" \
|
||||
@ -238,135 +236,12 @@
|
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
#define CONFIG_STACKSIZE SZ_128K
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#ifdef CONFIG_SYS_BOOT_QSPI
|
||||
#define CONFIG_FSL_QSPI
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#elif defined CONFIG_SYS_BOOT_NAND
|
||||
#define CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#else
|
||||
#define CONFIG_FSL_QSPI
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
|
||||
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
|
||||
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
|
||||
|
||||
#define CONFIG_CMD_BMODE
|
||||
|
||||
#ifdef CONFIG_FSL_QSPI
|
||||
#define CONFIG_QSPI_BASE QSPI0_BASE_ADDR
|
||||
#define CONFIG_QSPI_MEMMAP_BASE QSPI0_AMBA_BASE
|
||||
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_SPI_FLASH
|
||||
#define CONFIG_SPI_FLASH_BAR
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 40000000
|
||||
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
||||
#define CONFIG_SPI_FLASH_STMICRO
|
||||
#endif
|
||||
|
||||
/* NAND stuff */
|
||||
#ifdef CONFIG_SYS_USE_NAND
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_NAND_TRIMFFS
|
||||
|
||||
#define CONFIG_NAND_MXS
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
|
||||
/* DMA stuff, needed for GPMI/MXS NAND support */
|
||||
#define CONFIG_APBH_DMA
|
||||
#define CONFIG_APBH_DMA_BURST
|
||||
#define CONFIG_APBH_DMA_BURST8
|
||||
#endif
|
||||
|
||||
#define CONFIG_ENV_SIZE SZ_8K
|
||||
#if defined(CONFIG_ENV_IS_IN_MMC)
|
||||
#define CONFIG_ENV_OFFSET (12 * SZ_64K)
|
||||
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
|
||||
#define CONFIG_ENV_OFFSET (768 * 1024)
|
||||
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
||||
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
||||
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
||||
#elif defined(CONFIG_ENV_IS_IN_NAND)
|
||||
#undef CONFIG_ENV_SIZE
|
||||
#define CONFIG_ENV_OFFSET (60 << 20)
|
||||
#define CONFIG_ENV_SECT_SIZE (128 << 10)
|
||||
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
||||
#endif
|
||||
|
||||
|
||||
/* USB Configs */
|
||||
#define CONFIG_CMD_USB
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_MX6
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||
#define CONFIG_MXC_USB_FLAGS 0
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_FEC_MXC
|
||||
#define CONFIG_MII
|
||||
#define CONFIG_FEC_ENET_DEV 0
|
||||
#define CONFIG_PHYLIB
|
||||
|
||||
#if (CONFIG_FEC_ENET_DEV == 0)
|
||||
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x0
|
||||
#define CONFIG_FEC_XCV_TYPE RMII
|
||||
#elif (CONFIG_FEC_ENET_DEV == 1)
|
||||
#define IMX_FEC_BASE ENET2_BASE_ADDR
|
||||
#define CONFIG_FEC_MXC_PHYADDR 0x1
|
||||
#define CONFIG_FEC_XCV_TYPE RMII
|
||||
#endif
|
||||
#define CONFIG_ETHPRIME "FEC"
|
||||
|
||||
#define CONFIG_PHYLIB
|
||||
#define CONFIG_PHY_SMSC
|
||||
#endif
|
||||
|
||||
#define CONFIG_IMX_THERMAL
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_VIDEO
|
||||
/* #define CONFIG_VIDEO */
|
||||
#ifdef CONFIG_VIDEO
|
||||
#define CONFIG_PWM_IMX
|
||||
#define CONFIG_IMX6_PWM_PER_CLK 66000000
|
||||
@ -390,8 +265,4 @@
|
||||
|
||||
#define CONFIG_IOMUX_LPSR
|
||||
|
||||
#if defined(CONFIG_ANDROID_SUPPORT)
|
||||
#include "mx6ullevk_android.h"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
143
include/configs/i2som_common.h
Normal file
143
include/configs/i2som_common.h
Normal file
@ -0,0 +1,143 @@
|
||||
/*
|
||||
* include/configs/i2som_common.h
|
||||
*
|
||||
* Copyright (C) 2017 by i2SOM Team.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version2 as published by
|
||||
* the Free Software Foundation.
|
||||
*
|
||||
*
|
||||
* Description: Defines all definitions that are common to all i2SOM platforms
|
||||
*/
|
||||
|
||||
#ifndef __I2SOM_COMMON_H
|
||||
#define __I2SOM_COMMON_H
|
||||
|
||||
#include <linux/sizes.h>
|
||||
/* global helper stuff */
|
||||
|
||||
#define XMK_STR(x) #x
|
||||
#define MK_STR(x) XMK_STR(x)
|
||||
|
||||
#define CONFIG_VENDOR "i2SOM"
|
||||
|
||||
/*
|
||||
* If we are developing, we might want to start armboot from ram
|
||||
* so we MUST NOT initialize critical regs like mem-timing ...
|
||||
*/
|
||||
/* define for developing */
|
||||
#undef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
|
||||
#define PLATFORMNAME_MAXLEN 30 /* Max length of module and
|
||||
* platform name */
|
||||
#define MAX_DYNVARS 100 /* Max number of dynamic variables */
|
||||
|
||||
/* Stack Size */
|
||||
#define CONFIG_STACKSIZE SZ_128K
|
||||
|
||||
/* ********** Prompt *********** */
|
||||
#define CONFIG_PROMPT_SEPARATOR "#"
|
||||
|
||||
/* ********** Rootfs *********** */
|
||||
/* Delay before trying to mount the rootfs from a media */
|
||||
#define ROOTFS_DELAY 10
|
||||
|
||||
#ifndef CONFIG_ZERO_BOOTDELAY_CHECK
|
||||
# define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
#endif /* CONFIG_ZERO_BOOTDELAY_CHECK */
|
||||
|
||||
/* ********** network ********** */
|
||||
#ifndef CONFIG_TFTP_RETRIES_ON_ERROR
|
||||
# define CONFIG_TFTP_RETRIES_ON_ERROR 5
|
||||
#endif
|
||||
|
||||
#define CONFIG_SILENT_CONSOLE
|
||||
#define CONFIG_SOURCE
|
||||
#define CONFIG_AUTO_BOOTSCRIPT
|
||||
#define CONFIG_BOOTSCRIPT CONFIG_SYS_BOARD "-boot.scr"
|
||||
#define CONFIG_CMD_TIME
|
||||
#define CONFIG_CMD_ASKENV
|
||||
|
||||
#define CARRIERBOARD_VERSION_UNDEFINED 0
|
||||
#define CARRIERBOARD_ID_UNDEFINED 0
|
||||
|
||||
/* ********** usb/mmc ********** */
|
||||
#define DEFAULT_KERNEL_FS "fat"
|
||||
#define DEFAULT_KERNEL_DEVPART "0:1"
|
||||
#define DEFAULT_ROOTFS_MMC_PART "/dev/mmcblk0p2"
|
||||
|
||||
/* valid baudrates */
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
|
||||
|
||||
/* In: serial, Out: serial etc. */
|
||||
#define CFG_CONSOLE_INFO_QUIET
|
||||
|
||||
/* device tree */
|
||||
#define CONFIG_FDT_MAXSIZE SZ_128K
|
||||
|
||||
/* i2SOM commands arguments help */
|
||||
#define I2SOMCMD_ARG_BLKDEV_HELP \
|
||||
" - device:part: number of device and partition\n"
|
||||
#define I2SOMCMD_ARG_FILESYS_HELP \
|
||||
" - filesystem: fat (default)|ext4\n"
|
||||
#define I2SOMCMD_ARG_FILENAME_UPDATE_HELP \
|
||||
" - filename: file to transfer (if not provided, filename\n" \
|
||||
" will be taken from variable $<partition>_file)\n"
|
||||
#define I2SOMCMD_ARG_IMGADDR_HELP \
|
||||
" - image_address: address of image in RAM\n" \
|
||||
" ($loadaddr if not provided)\n"
|
||||
#define I2SOMCMD_ARG_IMGSIZE_HELP \
|
||||
" - image_size: size of image in RAM\n" \
|
||||
" ($filesize if not provided)\n"
|
||||
#define I2SOMCMD_ARG_SOURCEFILE_HELP \
|
||||
" - source_file: file to transfer\n"
|
||||
#define I2SOMCMD_ARG_TARGETFILE_HELP \
|
||||
" - target_file: target filename\n"
|
||||
#define I2SOMCMD_ARG_TARGETFILESYS_HELP \
|
||||
" - target_fs: fat (default)\n"
|
||||
#define I2SOMCMD_ARG_PARTITION_HELP \
|
||||
" - partition: partition name (if not provided, a partition \n" \
|
||||
" with the name of the OS will be assumed)\n"
|
||||
|
||||
/* Help arguments for update command */
|
||||
#define I2SOMCMD_UPDATE_NET_ARGS_HELP \
|
||||
" source=" CONFIG_SUPPORTED_SOURCES_NET " -> " \
|
||||
"[filename]\n" \
|
||||
I2SOMCMD_ARG_FILENAME_UPDATE_HELP
|
||||
#define I2SOMCMD_UPDATE_BLOCK_ARGS_HELP \
|
||||
" source=" CONFIG_SUPPORTED_SOURCES_BLOCK " -> " \
|
||||
"[device:part] [filesystem] [filename]\n" \
|
||||
I2SOMCMD_ARG_BLKDEV_HELP \
|
||||
I2SOMCMD_ARG_FILESYS_HELP \
|
||||
I2SOMCMD_ARG_FILENAME_UPDATE_HELP
|
||||
#define I2SOMCMD_UPDATE_RAM_ARGS_HELP \
|
||||
" source=ram -> [image_address] [image_size]\n" \
|
||||
I2SOMCMD_ARG_IMGADDR_HELP \
|
||||
I2SOMCMD_ARG_IMGSIZE_HELP
|
||||
|
||||
/* Help arguments for updatefile command */
|
||||
#define I2SOMCMD_UPDATEFILE_NET_ARGS_HELP \
|
||||
" source=" CONFIG_SUPPORTED_SOURCES_NET " -> " \
|
||||
"[source_file] [targetfile] [target_fs]\n" \
|
||||
I2SOMCMD_ARG_SOURCEFILE_HELP \
|
||||
I2SOMCMD_ARG_TARGETFILE_HELP \
|
||||
I2SOMCMD_ARG_TARGETFILESYS_HELP
|
||||
#define I2SOMCMD_UPDATEFILE_BLOCK_ARGS_HELP \
|
||||
" source=" CONFIG_SUPPORTED_SOURCES_BLOCK " -> " \
|
||||
"[device:part] [filesystem] [source_file] [target_file] [target_fs]\n" \
|
||||
I2SOMCMD_ARG_BLKDEV_HELP \
|
||||
I2SOMCMD_ARG_FILESYS_HELP \
|
||||
I2SOMCMD_ARG_SOURCEFILE_HELP \
|
||||
I2SOMCMD_ARG_TARGETFILE_HELP \
|
||||
I2SOMCMD_ARG_TARGETFILESYS_HELP
|
||||
#define I2SOMCMD_UPDATEFILE_RAM_ARGS_HELP \
|
||||
" source=ram -> "\
|
||||
"[image_address] [image_size] [targetfile] [target_fs]\n" \
|
||||
I2SOMCMD_ARG_IMGADDR_HELP \
|
||||
I2SOMCMD_ARG_IMGSIZE_HELP \
|
||||
I2SOMCMD_ARG_TARGETFILE_HELP \
|
||||
I2SOMCMD_ARG_TARGETFILESYS_HELP
|
||||
|
||||
#endif /* __I2SOM_COMMON_H */
|
||||
Reference in New Issue
Block a user