openstlinux/linux-st
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ARM: dts: stm32: remove stm32mp135d-dk support

Browse Source 
STM32MP13 DK with non-crypto SoC won't be produced.
Remove its support.

Change-Id: Ide4ee02eb58a1622f3a9200bd425f2fa58af518a
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/266807
Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com>
Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com>
This commit is contained in:
Amelie Delaunay
2022-09-19 11:05:06 +02:00
committed by Eric Fourmont
parent 882a3964cd
commit b45df948b6
4 changed files with 0 additions and 714 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/arm/stm32/stm32.yaml
View File

@ -57,7 +57,6 @@ properties:
- const: st,stm32h750
- items:
- enum:
- st,stm32mp135d-dk
- st,stm32mp135f-dk
- const: st,stm32mp135
- items:

4
arch/arm/boot/dts/Makefile
View File

@ -10,8 +10,6 @@ DTC_FLAGS_stm32429i-eval += -@
DTC_FLAGS_stm32746g-eval += -@
DTC_FLAGS_stm32h743i-eval += -@
DTC_FLAGS_stm32h743i-disco += -@
DTC_FLAGS_stm32mp135d-dk += -@
DTC_FLAGS_stm32mp135d-dk-a7-examples += -@
DTC_FLAGS_stm32mp135f-dk += -@
DTC_FLAGS_stm32mp135f-dk-a7-examples +=-@
DTC_FLAGS_stm32mp157a-dk1 += -@
@ -1155,8 +1153,6 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
stm32h750i-art-pi.dtb \
stm32mp135d-dk.dtb \
stm32mp135d-dk-a7-examples.dtb \
stm32mp135f-dk.dtb \
stm32mp135f-dk-a7-examples.dtb \
stm32mp153c-dhcom-drc02.dtb \

22
arch/arm/boot/dts/stm32mp135d-dk-a7-examples.dts
View File

@ -1,22 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2022 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
/dts-v1/;
#include "stm32mp135d-dk.dts"
/ {
model = "STMicroelectronics STM32MP135D-DK configured to run Linux A7 examples";
compatible = "st,stm32mp135d-dk-a7-examples", "st,stm32mp135d-dk", "st,stm32mp135";
};
&timers4 {
status = "okay";
};
&timers8 {
status = "okay";
};

687
arch/arm/boot/dts/stm32mp135d-dk.dts
View File

@ -1,687 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2022 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/rtc/rtc-stm32.h>
#include "stm32mp135.dtsi"
#include "stm32mp13xd.dtsi"
#include "stm32mp13-pinctrl.dtsi"
/ {
model = "STMicroelectronics STM32MP135D-DK Discovery Board";
compatible = "st,stm32mp135d-dk", "st,stm32mp135";
aliases {
ethernet0 = &eth1;
ethernet1 = &eth2;
serial0 = &uart4;
serial1 = &usart1;
serial2 = &uart8;
serial3 = &usart2;
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
stdout-path = "serial0:115200n8";
framebuffer {
compatible = "simple-framebuffer";
clocks = <&rcc LTDC_PX>;
status = "disabled";
};
};
clocks {
clk_ext_camera: clk-ext-camera {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
clk_mco1: clk-mco1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
};
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x20000000>;
};
gpio-keys {
compatible = "gpio-keys";
user-pa13 {
label = "User-PA13";
linux,code = <BTN_1>;
gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
};
leds {
compatible = "gpio-leds";
led-blue {
function = LED_FUNCTION_HEARTBEAT;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
optee_framebuffer@dd000000 {
reg = <0xdd000000 0x1000000>;
no-map;
};
optee@de000000 {
reg = <0xde000000 0x2000000>;
no-map;
};
};
v3v3_ao: v3v3_ao {
compatible = "regulator-fixed";
regulator-name = "v3v3_ao";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
panel_backlight: panel-backlight {
compatible = "gpio-backlight";
gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
default-on;
default-brightness-level = <0>;
status = "okay";
};
panel_rgb: panel-rgb {
compatible = "rocktech,rk043fn48h", "panel-dpi";
enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
backlight = <&panel_backlight>;
power-supply = <&scmi_v3v3_sw>;
data-mapping = "bgr666";
status = "okay";
width-mm = <105>;
height-mm = <67>;
port {
panel_in_rgb: endpoint {
remote-endpoint = <&ltdc_out_rgb>;
};
};
panel-timing {
clock-frequency = <10000000>;
hactive = <480>;
vactive = <272>;
hsync-len = <52>;
hfront-porch = <10>;
hback-porch = <10>;
vsync-len = <10>;
vfront-porch = <10>;
vback-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&mcp23017 11 GPIO_ACTIVE_LOW>;
};
};
&adc_1 {
pinctrl-names = "default";
pinctrl-0 = <&adc1_usb_cc_pins_a>;
vdda-supply = <&scmi_vdd_adc>;
vref-supply = <&scmi_vdd_adc>;
status = "okay";
adc1: adc@0 {
/*
* Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12.
* Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
* 5 * (5.1 + 47kOhms) * 5pF => 1.3us.
* Use arbitrary margin here (e.g. 5us).
*/
st,min-sample-time-nsecs = <5000>;
/* USB Type-C CC1 & CC2 */
st,adc-channels = <6 12>;
status = "okay";
};
};
&crc1 {
status = "okay";
};
&dcmipp {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcmipp_pins_a>;
pinctrl-1 = <&dcmipp_sleep_pins_a>;
port {
dcmipp_0: endpoint {
remote-endpoint = <&mipid02_2>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
pclk-sample = <0>;
pclk-max-frequency = <120000000>;
};
};
};
&dma1 {
sram = <&dma_pool>;
};
&dma2 {
sram = <&dma_pool>;
};
&dts {
status = "okay";
};
&eth1 {
status = "okay";
pinctrl-0 = <&eth1_rmii_pins_a>;
pinctrl-1 = <&eth1_rmii_sleep_pins_a>;
pinctrl-names = "default", "sleep";
phy-mode = "rmii";
max-speed = <100>;
phy-handle = <&phy0_eth1>;
nvmem-cells = <&ethernet_mac1_address>;
nvmem-cell-names = "mac-address";
mdio1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0_eth1: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.c131";
reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>;
reg = <0>;
interrupt-parent = <&gpioi>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
};
};
};
&eth2 {
status = "okay";
pinctrl-0 = <&eth2_rmii_pins_a>;
pinctrl-1 = <&eth2_rmii_sleep_pins_a>;
pinctrl-names = "default", "sleep";
phy-mode = "rmii";
max-speed = <100>;
phy-handle = <&phy0_eth2>;
st,ext-phyclk;
phy-supply = <&scmi_v3v3_sw>;
nvmem-cells = <&ethernet_mac2_address>;
nvmem-cell-names = "mac-address";
mdio1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0_eth2: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.c131";
reset-gpios = <&mcp23017 10 GPIO_ACTIVE_LOW>;
reg = <0>;
};
};
};
&i2c1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-1 = <&i2c1_sleep_pins_a>;
i2c-scl-rising-time-ns = <96>;
i2c-scl-falling-time-ns = <3>;
clock-frequency = <1000000>;
status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
mcp23017: pinctrl@21 {
compatible = "microchip,mcp23017";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpiog>;
pinctrl-names = "default";
pinctrl-0 = <&mcp23017_pins_a>;
interrupt-controller;
#interrupt-cells = <2>;
microchip,irq-mirror;
};
stm32g0@53 {
compatible = "st,stm32g0-typec";
reg = <0x53>;
/* Alert pin on PI2 */
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpioi>;
/* Internal pull-up on PI2 */
pinctrl-names = "default";
pinctrl-0 = <&stm32g0_intn_pins_a>;
firmware-name = "stm32g0-ucsi.mp135f-dk.fw";
power-domains = <&pd_core>;
wakeup-source;
connector {
compatible = "usb-c-connector";
label = "USB-C";
port {
con_usb_c_g0_ep: endpoint {
remote-endpoint = <&usbotg_hs_ep>;
};
};
};
};
};
&i2c5 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_pins_a>;
pinctrl-1 = <&i2c5_sleep_pins_a>;
i2c-scl-rising-time-ns = <170>;
i2c-scl-falling-time-ns = <5>;
clock-frequency = <400000>;
status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
gc2145: gc2145@3c {
compatible = "galaxycore,gc2145";
reg = <0x3c>;
clocks = <&clk_ext_camera>;
IOVDD-supply = <&scmi_v3v3_sw>;
AVDD-supply = <&scmi_v3v3_sw>;
DVDD-supply = <&scmi_v3v3_sw>;
powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
status = "okay";
port {
gc2145_ep: endpoint {
remote-endpoint = <&mipid02_0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
goodix: goodix_ts@5d {
compatible = "goodix,gt911";
reg = <0x5d>;
pinctrl-names = "default";
pinctrl-0 = <&goodix_pins_a>;
interrupt-parent = <&gpiof>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpioh 2 GPIO_ACTIVE_LOW>;
AVDD28-supply = <&scmi_v3v3_sw>;
VDDIO-supply = <&scmi_v3v3_sw>;
touchscreen-size-x = <480>;
touchscreen-size-y = <272>;
status = "okay" ;
};
ov5640: camera@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
clocks = <&clk_ext_camera>;
clock-names = "xclk";
DOVDD-supply = <&scmi_v3v3_sw>;
status = "disabled";
powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
port {
ov5640_0: endpoint {
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
stmipi: stmipi@14 {
compatible = "st,st-mipid02";
reg = <0x14>;
status = "okay";
clocks = <&clk_mco1>;
clock-names = "xclk";
VDDE-supply = <&scmi_v1v8_periph>;
VDDIN-supply = <&scmi_v1v8_periph>;
reset-gpios = <&mcp23017 2 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mipid02_0: endpoint {
data-lanes = <1 2>;
lane-polarities = <0 0 0>;
remote-endpoint = <&gc2145_ep>;
};
};
port@2 {
reg = <2>;
mipid02_2: endpoint {
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
pclk-sample = <0>;
remote-endpoint = <&dcmipp_0>;
};
};
};
};
};
&iwdg2 {
timeout-sec = <32>;
status = "okay";
};
&ltdc {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&ltdc_pins_a>;
pinctrl-1 = <&ltdc_sleep_pins_a>;
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
ltdc_out_rgb: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_in_rgb>;
};
};
};
&rtc {
st,lsco = <RTC_OUT2_RMP>;
pinctrl-0 = <&rtc_out2_rmp_pins_a>;
pinctrl-names = "default";
status = "okay";
};
&scmi_regu {
scmi_vddcpu: voltd-vddcpu {
voltd-name = "vddcpu";
regulator-name = "vddcpu";
};
scmi_vdd: voltd-vdd {
voltd-name = "vdd";
regulator-name = "vdd";
};
scmi_vddcore: voltd-vddcore {
voltd-name = "vddcore";
regulator-name = "vddcore";
};
scmi_vdd_adc: voltd-vdd_adc {
voltd-name = "vdd_adc";
regulator-name = "vdd_adc";
};
scmi_vdd_usb: voltd-vdd_usb {
voltd-name = "vdd_usb";
regulator-name = "vdd_usb";
};
scmi_vdd_sd: voltd-vdd_sd {
voltd-name = "vdd_sd";
regulator-name = "vdd_sd";
};
scmi_v1v8_periph: voltd-v1v8_periph {
voltd-name = "v1v8_periph";
regulator-name = "v1v8_periph";
};
scmi_v3v3_sw: voltd-v3v3_sw {
voltd-name = "v3v3_sw";
regulator-name = "v3v3_sw";
};
};
&sdmmc1 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
disable-wp;
st,neg-edge;
bus-width = <4>;
vmmc-supply = <&scmi_vdd_sd>;
status = "okay";
};
/* Wifi */
&sdmmc2 {
arm,primecell-periphid = <0x10153180>;
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_clk_pins_a>;
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_clk_pins_a>;
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
non-removable;
st,neg-edge;
bus-width = <4>;
vmmc-supply = <&v3v3_ao>;
mmc-pwrseq = <&wifi_pwrseq>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
&spi5 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi5_pins_a>;
pinctrl-1 = <&spi5_sleep_pins_a>;
status = "disabled";
};
&sram {
dma_pool: dma-sram@0 {
reg = <0x0 0x4000>;
pool;
};
};
&timers3 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm3_pins_a>;
pinctrl-1 = <&pwm3_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@2 {
status = "okay";
};
};
&timers4 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm4_pins_a>;
pinctrl-1 = <&pwm4_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@3 {
status = "okay";
};
};
&timers8 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm8_pins_a>;
pinctrl-1 = <&pwm8_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@7 {
status = "okay";
};
};
&timers14 {
status = "disabled";
pwm {
pinctrl-0 = <&pwm14_pins_a>;
pinctrl-1 = <&pwm14_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@13 {
status = "okay";
};
};
&uart4 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
/delete-property/dmas;
/delete-property/dma-names;
status = "okay";
};
&uart8 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart8_pins_a>;
pinctrl-1 = <&uart8_sleep_pins_a>;
pinctrl-2 = <&uart8_idle_pins_a>;
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
};
&usart1 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&usart1_pins_a>;
pinctrl-1 = <&usart1_sleep_pins_a>;
pinctrl-2 = <&usart1_idle_pins_a>;
uart-has-rtscts;
status = "disabled";
};
/* Bluetooth */
&usart2 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&usart2_pins_a>;
pinctrl-1 = <&usart2_sleep_pins_a>;
pinctrl-2 = <&usart2_idle_pins_a>;
uart-has-rtscts;
status = "okay";
bluetooth {
shutdown-gpios = <&mcp23017 13 GPIO_ACTIVE_HIGH>;
compatible = "brcm,bcm43438-bt";
max-speed = <3000000>;
vbat-supply = <&v3v3_ao>;
vddio-supply = <&v3v3_ao>;
};
};
&usbh_ehci {
phys = <&usbphyc_port0>;
status = "okay";
};
&usbotg_hs {
phys = <&usbphyc_port1 0>;
phy-names = "usb2-phy";
usb-role-switch;
status = "okay";
port {
usbotg_hs_ep: endpoint {
remote-endpoint = <&con_usb_c_g0_ep>;
};
};
};
&usbphyc {
status = "okay";
};
&usbphyc_port0 {
phy-supply = <&scmi_vdd_usb>;
st,current-boost-microamp = <1000>;
st,decrease-hs-slew-rate;
st,tune-hs-dc-level = <2>;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <11>;
st,trim-hs-impedance = <2>;
st,tune-squelch-level = <1>;
st,enable-hs-rx-gain-eq;
st,no-hs-ftime-ctrl;
st,no-lsfs-sc;
/*
* Hack to keep hub active if wakeup source is enabled
* otherwise the hub will wakeup the port0 as soon as the v3v3_sw is disabled
*/
connector {
compatible = "usb-a-connector";
vbus-supply = <&scmi_v3v3_sw>;
};
};
&usbphyc_port1 {
phy-supply = <&scmi_vdd_usb>;
st,current-boost-microamp = <1000>;
st,decrease-hs-slew-rate;
st,tune-hs-dc-level = <2>;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <11>;
st,trim-hs-impedance = <2>;
st,tune-squelch-level = <1>;
st,enable-hs-rx-gain-eq;
st,no-hs-ftime-ctrl;
st,no-lsfs-sc;
};