If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.
v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.
v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says
"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."
so use EOPNOTSUPP as its equivalent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
We wish to control certain driver_features flags on a per-device basis
while still sharing a single drm_driver instance across all the
devices. To that end introduce device.driver_features. By default
it will be set to ~0 to not impose any limits beyond
driver.driver_features. Drivers can then clear specific flags
in the per-device bitmask to limit the capabilities of the device.
An alternative approach would be to copy the driver_features from
the driver into the device in drm_dev_init(), however that would
require verifying that no driver is currently changing
driver.driver_features after drm_dev_init(). Hence the ~0 apporach
was easier.
Ideally we'd also make drm_driver const but there is plenty of code
left that wants to mutate it (eg. various vfunc assignments). We'll
need to fix all that up before we can make it const.
And while at it fix up the type of the feature flag passed to
drm_core_check_feature().
v2: Streamline the && vs. & (Chris)
s/int/u32/ in drm_core_check_feature() args
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The Analogix DP bridge driver is pretty verbose, and outputs
things like
[ 619.414067] rockchip-dp ff970000.edp: Link Training Clock Recovery success
[ 619.429233] rockchip-dp ff970000.edp: Link Training success!
each time the display gets unblanked. While it is good to know
that the device is behaving correctly, users already know that
because they can see some video output.
Let's keep these messages for cases where we need to actually
debug the driver (we have dynamic debug to enable them at runtime
if need be), and let's keep the kernel quiet otherwise.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805172857.2517-1-marc.zyngier@arm.com
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: cf77d79b4e ("drm/sun4i: tcon: Add another way for matching mixers with tcon")
Fixes: 0305189afb ("drm/sun4i: tcon: Add support for R40 TCON")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Matt Hart <matthew.hart@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
Lots of code can be removed by relying on fb-helper:
- "struct drm_framebuffer" moves to fb_helper.fb.
- "struct drm_gem_object" moves to fb_helper.obj[0].
- "struct qxl_device" can be inferred as drm_fb_helper is embedded.
- qxl_user_framebuffer_create -> drm_gem_fb_create.
- qxl_user_framebuffer_destroy -> drm_gem_fb_destroy.
- qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow).
Remove unused code:
- qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend.
- Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size.
Misc notes:
- The dirty callback is preserved as it is necessary to trigger update
commands in the hw (the screen stays black otherwise).
- No idea when .create_handle in drm_framebuffer_funcs is used, but use
the same drm_gem_fb_create_handle to match drm_gem_fb_funcs.
- I don't know why qxl_fb_find_or_create_single used to check for an
existing framebuffer and removed that check to match other drivers.
- Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to
be dynamically allocated. Replace the existing defio config by
drm_fb_helper_defio_init to accomodate this.
Testing results: startx with fbdev, modesetting and qxl all seems to
work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously
fails but others are fine. QEMU -spice and QEMU -spice with vdagent and
multiple (resized) displays (via remote-viewer) also works.
unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a
use-after-free in qxl_check_idle via qxl_ttm_fini).
Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that
would result in further code reduction, improve error handling (like not
leaking shadow memory), but unfortunately QXL has no implementation for
qxl_gem_prime_vmap.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For buffer sharing, use dma-buf instead. We can't set smem_start to 0
unconditionally since that's used by the fbdev mmap default
implementation. And we have plenty of userspace which would like to
keep that working.
This might break legit userspace - if it does we need to look at a
case-by-cases basis how to handle that. Worst case I expect overrides
for only specific drivers, since anything remotely modern should be
using dma-buf/prime now (which is about 7 years old now for DRM
drivers).
This issue was uncovered because Noralf's rework to implement a
generic fb_probe also implements it's own fb_mmap callback. Which
means smem_start didn't have to be set anymore, which blew up some
blob in userspace rather badly.
Acked-by: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
DRM drivers really, really, really don't want random userspace to
share buffer behind it's back, bypassing the dma-buf buffer sharing
machanism. For that reason we've ruthlessly rejected any IOCTL
exposing the physical address of any graphics buffer.
Unfortunately fbdev comes with that built-in. We could just set
smem_start to 0, but that means we'd have to hand-roll our own fb_mmap
implementation. For good reasons many drivers do that, but
smem_start/length is still super convenient.
Hence instead just stop the leak in the ioctl, to keep fb mmap working
as-is. A second patch will set this flag for all drm drivers.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-3-daniel.vetter@ffwll.ch
Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.
In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).
A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Currently unloading bochs_drm (after unbinding the vtconsole) results in
a warning about a leaked connector:
[drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked!
While investigating a potential fix I noticed that a lot of open-coded
functionality is already implemented elsewhere, so start converting it:
bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl).
bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding
"struct drm_framebuffer" from "struct bochs_framebuffer".
Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create
which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c.
For this to work, the GEM object is moved into "drm_framebuffer". After
that, "bochs_framebuffer" is no longer needed and therefore removed.
Remove the unused "size" and "initialized" fields from fb, the latter is
not necessary as drm_fb_helper_fbdev_teardown can be called even if
bochsfb_create fails. This theory was tested by returning early and
late (just before drm_gem_fbdev_fb_create). Both scenarios fail
gracefully although the latter seems to leak the object from
bochsfb_create_object (not a regression).
Guess on the reason for the encoder leak: drm_framebuffer_cleanup was
previously used, but did not destroy much. drm_fb_helper_fbdev_teardown
is now used and calls drm_framebuffer_remove which does a bit more work.
Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm'
and also with Xorg + fbdev (startx -> xterm). The latter triggered a
warning in ttm_bo_vm_open that existed before, see
https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.de
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-3-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drivers must set the quirk_addfb_prefer_host_byte_order quirk to make
the drm_mode_addfb() compat code work correctly on bigendian machines.
If they don't they interpret pixel_format values incorrectly for bug
compatibility, which in turn implies the ADDFB2 ioctl does not work
correctly then. So block it to make userspace fallback to ADDFB.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180907073213.20410-1-kraxel@redhat.com
