* Patch by Rune Torgersen, 13 Feb 2003:

Add support for Motorola MPC8266ADS board

* Patch by Kyle Harris, 19 Feb 2003:
  patches for the Intel lubbock board:
  memsetup.S - general cleanup (based on Robert's csb226 code)
  flash.c - overhaul, actually works now
  lubbock.c - fix init funcs to return proper value

* Patch by Kenneth Johansson, 26 Feb 2003:
  - Fixed off by one in RFTA calculation.
  - No need to abort when LDF is lower than we can program it's only
    minimum timing so clamp it to what we can do.
  - Takes function pointer to function for reading the spd_nvram. Usefull
    for faking data or hardcode a module without the nvram.
  - fix other user for above change
  - fix some comments.

* Patches by Brian Waite, 26 Feb 2003:
  - fix port for evb64260 board
  - fix PCI for evb64260 board
  - fix PCI scan

* Patch by Reinhard Meyer, 1 Mar 2003:
  Add support for EMK TOP860 Module

* Patch by Yuli Barcohen, 02 Mar 2003:
  Add SPD EEPROM support for MPC8260ADS board

CHANGELOG

@@ -1,7 +1,57 @@
 ======================================================================
-Changes since U-Boot 0.2.1:
+Changes since U-Boot 0.2.2:
 ======================================================================
 
+* Patch by Rune Torgersen, 13 Feb 2003:
+  Add support for Motorola MPC8266ADS board
+
+* Patch by Kyle Harris, 19 Feb 2003:
+  patches for the Intel lubbock board:
+  memsetup.S - general cleanup (based on Robert's csb226 code)
+  flash.c - overhaul, actually works now
+  lubbock.c - fix init funcs to return proper value
+
+* Patch by Kenneth Johansson, 26 Feb 2003:
+  - Fixed off by one in RFTA calculation. 
+  - No need to abort when LDF is lower than we can program it's only
+    minimum timing so clamp it to what we can do. 
+  - Takes function pointer to function for reading the spd_nvram. Usefull
+    for faking data or hardcode a module without the nvram.
+  - fix other user for above change
+  - fix some comments.
+
+* Patches by Brian Waite, 26 Feb 2003:
+  - fix port for evb64260 board
+  - fix PCI for evb64260 board
+  - fix PCI scan
+
+* Patch by Reinhard Meyer, 1 Mar 2003:
+  Add support for EMK TOP860 Module
+
+* Patch by Yuli Barcohen, 02 Mar 2003:
+  Add SPD EEPROM support for MPC8260ADS board
+
+* Patch by Robert Schwebel, 21 Jan 2003:
+  - Add support for Innokom board
+  - Don't complain if "install" fails
+  - README cleanup (remove duplicated lines)
+  - Update PXA header files
+
+* Add documentation for existing POST code (doc/README.POST)
+
+* Patch by Laudney Ren, 15 Jan 2003:
+  Fix handling of redundand environment in "tools/envcrc.c"
+
+* Patch by Detlev Zundel, 28 Feb 2003:
+  Add bedbug support for 824x systems
+
+* Add support for 16 MB flash configuration of TRAB board
+
+* Patch by Erwin Rol, 27 Feb 2003:
+  Add support for RTEMS
+
+* Add image information to README
+
 * Patch by Stefan Roese, 18 Feb 2003:
   CPCIISER4 configuration updated.
 
@@ -14,9 +64,21 @@ Changes since U-Boot 0.2.1:
   PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
   RST# to respond to configuration cycles (33MHz -> 1s).
 
+* Fix dual PCMCIA slot support (when running with just one
+  slot populated)
+
+* Add VFD type detection to trab board
+
+* extend drivers/cs8900.c driver to synchronize  ethaddr  environment
+  variable with value in the EEPROM
+
 * Patch by Stefan Roese, 10 Feb 2003:
   Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
 
+======================================================================
+Changes for U-Boot 0.2.2:
+======================================================================
+
 * Add dual ethernet support on PM826
 
 * Add support for LXT971 PHY on PM826

CREDITS

@@ -174,6 +174,10 @@ N: Dan Malek
 E: dan@netx4.com
 D: FADSROM, the grandfather of all of this
 
+N: Reinhard Meyer
+E: r.meyer@emk-elektronik.de
+D: Port to EMK TOP860 Module
+
 N: Jay Monkman
 E: jtm@smoothsmoothie.com
 D: EST SBC8260 support
@@ -227,7 +231,8 @@ D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots mor
 
 N: Robert Schwebel
 E: r.schwebel@pengutronix.de
-D: Support for csb226 board (xscale)
+D: Support for csb226 and innokom boards (xscale)
+
 N: Rob Taylor
 E: robt@flyingpig.com
 D: Port to MBX860T and Sandpoint8240
@@ -240,6 +245,10 @@ N: Jim Thompson
 E: jim@musenki.com
 D: Support for MUSENKI board
 
+N: Rune Torgersen
+E: <runet@innovsys.com>
+D: Support for Motorola MPC8266ADS board
+
 N: David Updegraff
 E: dave@cray.com
 D: Port to Cray L1 board; DHCP vendor extensions

MAINTAINERS

@@ -14,6 +14,7 @@
 
 
 #########################################################################
+# PowerPC Systems:							#
 #									#
 # Maintainer Name, Email Address					#
 #	Board			CPU					#
@@ -140,6 +141,10 @@ Eran Man <eran@nbase.co.il>
 
 	EVB64260_750CX		MPC750CX
 
+Reinhard Meyer <r.meyer@emk-elektronik.de>
+
+	TOP860			MPC860
+
 Scott McNutt <smcnutt@artesyncp.com>
 
 	EBONY			PPC440GP
@@ -184,6 +189,10 @@ Jim Thompson <jim@musenki.com>
 	MUSENKI			MPC8245/8241
 	Sandpoint8245		MPC8245
 
+Rune Torgersen <runet@innovsys.com>
+
+	MPC8266ADS		MPC8266
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -246,6 +255,7 @@ Rolf Offermanns <rof@sysgo.de>
 Robert Schwebel <r.schwebel@pengutronix.de>
 
 	csb226			xscale
+	innokom			xscale
 
 Alex Z<>pke <azu@sysgo.de>
 
@@ -263,6 +273,17 @@ Daniel Engstr
 
 	sc520_cdp		x86
 
+#########################################################################
+# MIPS Systems:								#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Wolfgang Denk <wd@denx.de>
+
+	incaip			MIPS32 4Kc
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################

MAKEALL

@@ -25,9 +25,9 @@ LIST_8xx="	\
 	MBX		MBX860T		MHPC		MVS1		\
 	NETVIA		NX823		pcu_e		R360MPI		\
 	RPXClassic	RPXlite		RRvision	SM850		\
-	SPD823TS	SXNI855T	TQM823L		TQM823L_LCD	\
-	TQM850L		TQM855L		TQM860L		TQM860L_FEC	\
-	TTTech		v37						\
+	SPD823TS	SXNI855T	TOP860		TQM823L		\
+	TQM823L_LCD	TQM850L		TQM855L		TQM860L		\
+	TQM860L_FEC	TTTech		v37				\
 "
 
 #########################################################################
@@ -59,9 +59,9 @@ LIST_824x="	\
 
 LIST_8260="	\
 	cogent_mpc8260	CPU86		ep8260		gw8260		\
-	hymod		IPHASE4539	MPC8260ADS	PM826		\
-	ppmc8260	RPXsuper	rsdproto	sacsng		\
-	sbc8260		SCM		TQM8260				\
+	hymod		IPHASE4539	MPC8260ADS	MPC8266ADS	\
+	PM826		ppmc8260	RPXsuper	rsdproto	\
+	sacsng		sbc8260		SCM		TQM8260		\
 "
 
 #########################################################################
@@ -101,7 +101,7 @@ LIST_ARM9="smdk2400 smdk2410 trab"
 ## Xscale Systems
 #########################################################################
 
-LIST_xscale="lubbock cradle csb226"
+LIST_xscale="lubbock cradle csb226 innokom"
 
 
 LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_xscale}"

Makefile

@@ -77,6 +77,9 @@ endif
 ifeq ($(ARCH),i386)
 #CROSS_COMPILE = i386-elf-
 endif
+ifeq ($(ARCH),mips)
+CROSS_COMPILE = mips_4KC-
+endif
 endif
 endif
 
@@ -129,8 +132,8 @@ LIBS += lib_generic/libgeneric.a
 all:		u-boot.srec u-boot.bin System.map
 
 install:	all
-		cp u-boot.bin /tftpboot/u-boot.bin
-		cp u-boot.bin /net/sam/tftpboot/u-boot.bin
+		-cp u-boot.bin /tftpboot/u-boot.bin
+		-cp u-boot.bin /net/denx/tftpboot/u-boot.bin
 
 u-boot.srec:	u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
@@ -326,6 +329,10 @@ SPD823TS_config:	unconfig
 SXNI855T_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx sixnet
 
+# EMK MPC8xx based modules
+TOP860_config:		unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx top860 emk
+
 # Play some tricks for configuration selection
 # All boards can come with 50 MHz (default), 66MHz or 80MHz clock,
 # but only 855 and 860 boards may come with FEC
@@ -513,6 +520,9 @@ IPHASE4539_config:	unconfig
 MPC8260ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads
 
+MPC8266ADS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
+
 PM826_config	\
 PM826_ROMBOOT_config: unconfig
 	@./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826
@@ -611,14 +621,22 @@ shannon_config	:	unconfig
 ## ARM920T Systems
 #########################################################################
 
+xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
+
 smdk2400_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2400
 
 smdk2410_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2410
 
-trab_config :		unconfig
-	@./mkconfig $(@:_config=) arm arm920t trab
+trab_config \
+trab_big_flash_config:	unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _big_flash,$@)" ] || \
+		{ echo "#define CONFIG_BIG_FLASH" >>include/config.h ; \
+		  echo "... with big flash support" ; \
+		}
+	@./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
 
 #########################################################################
 ## ARM720T Systems
@@ -631,18 +649,21 @@ ep7312_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm720t ep7312
 
 #########################################################################
-## Xscale Systems
+## XScale Systems
 #########################################################################
 
-lubbock_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale lubbock
-
 cradle_config	:	unconfig
 	@./mkconfig $(@:_config=) arm xscale cradle
 
 csb226_config	:	unconfig
 	@./mkconfig $(@:_config=) arm xscale csb226
 
+innokom_config	:	unconfig
+	@./mkconfig $(@:_config=) arm xscale innokom
+
+lubbock_config	:	unconfig
+	@./mkconfig $(@:_config=) arm xscale lubbock
+
 #========================================================================
 # i386
 #========================================================================
@@ -652,7 +673,17 @@ csb226_config	:	unconfig
 sc520_cdp_config	:	unconfig
 	@./mkconfig $(@:_config=) i386 i386 sc520_cdp
 
+#========================================================================
+# MIPS
+#========================================================================
 #########################################################################
+## MIPS32 4Kc
+#########################################################################
+
+incaip_config :		unconfig
+	@./mkconfig $(@:_config=) mips mips incaip
+
+
 
 clean:
 	find . -type f \
@@ -674,6 +705,7 @@ clobber:	clean
 	rm -fr *.*~
 	rm -f u-boot u-boot.bin u-boot.elf u-boot.srec u-boot.map System.map
 	rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
+	rm -f cpu/mpc824x/bedbug_603e.c
 	rm -f include/asm/arch include/asm
 
 mrproper \

README

@@ -395,10 +395,10 @@ The following options need to be configured:
 		default environment.
 
 - Console Interface:
-                Depending on board, define exactly one serial port
-                (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
-                CONFIG_8xx_CONS_SCC1, ...), or switch off the serial
-                console by defining CONFIG_8xx_CONS_NONE
+		Depending on board, define exactly one serial port
+		(like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
+		CONFIG_8xx_CONS_SCC1, ...), or switch off the serial
+		console by defining CONFIG_8xx_CONS_NONE
 
 		Note: if CONFIG_8xx_CONS_NONE is defined, the serial
 		port routines must be defined elsewhere
@@ -443,9 +443,9 @@ The following options need to be configured:
 						addional board info beside
 						the logo
 
-                When CONFIG_CFB_CONSOLE is defined, video console is
-                default i/o. Serial console can be forced with
-                environment 'console=serial'.
+		When CONFIG_CFB_CONSOLE is defined, video console is
+		default i/o. Serial console can be forced with
+		environment 'console=serial'.
 
 - Console Baudrate:
 		CONFIG_BAUDRATE - in bps
@@ -489,15 +489,15 @@ The following options need to be configured:
 		within "Boot Delay" after reset.
 
 		CONFIG_BOOTARGS
-                This can be used to pass arguments to the bootm
-                command. The value of CONFIG_BOOTARGS goes into the
-                environment value "bootargs".
+		This can be used to pass arguments to the bootm
+		command. The value of CONFIG_BOOTARGS goes into the
+		environment value "bootargs".
 
 		CONFIG_RAMBOOT and CONFIG_NFSBOOT
-                The value of these goes into the environment as
-                "ramboot" and "nfsboot" respectively, and can be used
-                as a convenience, when switching between booting from
-                ram and nfs.
+		The value of these goes into the environment as
+		"ramboot" and "nfsboot" respectively, and can be used
+		as a convenience, when switching between booting from
+		ram and nfs.
 
 - Pre-Boot Commands:
 		CONFIG_PREBOOT
@@ -596,13 +596,13 @@ The following options need to be configured:
 
 
 	Note:	Don't enable the "icache" and "dcache" commands
-                (configuration option CFG_CMD_CACHE) unless you know
-                what you (and your U-Boot users) are doing. Data
-                cache cannot be enabled on systems like the 8xx or
-                8260 (where accesses to the IMMR region must be
-                uncached), and it cannot be disabled on all other
-                systems where we (mis-) use the data cache to hold an
-                initial stack and some data.
+		(configuration option CFG_CMD_CACHE) unless you know
+		what you (and your U-Boot users) are doing. Data
+		cache cannot be enabled on systems like the 8xx or
+		8260 (where accesses to the IMMR region must be
+		uncached), and it cannot be disabled on all other
+		systems where we (mis-) use the data cache to hold an
+		initial stack and some data.
 
 
 		XXX - this list needs to get updated!
@@ -628,10 +628,10 @@ The following options need to be configured:
 
 - Timestamp Support:
 
-                When CONFIG_TIMESTAMP is selected, the timestamp
-                (date and time) of an image is printed by image
-                commands like bootm or iminfo. This option is
-                automatically enabled when you select CFG_CMD_DATE .
+		When CONFIG_TIMESTAMP is selected, the timestamp
+		(date and time) of an image is printed by image
+		commands like bootm or iminfo. This option is
+		automatically enabled when you select CFG_CMD_DATE .
 
 - Partition Support:
 		CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION
@@ -720,14 +720,14 @@ The following options need to be configured:
 		standard LiLo mode numbers.
 		Following modes are supported  (* is default):
 
-                            800x600  1024x768  1280x1024
-              256  (8bit)     303*      305       307
-            65536 (16bit)     314       317       31a
-        16,7 Mill (24bit)     315       318       31b
+			    800x600  1024x768  1280x1024
+	      256  (8bit)     303*      305       307
+	    65536 (16bit)     314       317       31a
+	16,7 Mill (24bit)     315       318       31b
 		(i.e. setenv videomode 317; saveenv; reset;)
 
 		CONFIG_VIDEO_SED13806 
-                Enable Epson SED13806 driver. This driver supports 8bpp
+		Enable Epson SED13806 driver. This driver supports 8bpp
 		and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
 		or CONFIG_VIDEO_SED13806_16BPP
 
@@ -839,8 +839,8 @@ The following options need to be configured:
 		either CONFIG_HARD_I2C or CONFIG_SOFT_I2C must be defined
 		to include the appropriate I2C driver.
 
-                See also: common/cmd_i2c.c for a description of the
-                command line interface.
+		See also: common/cmd_i2c.c for a description of the
+		command line interface.
 
 
 		CONFIG_HARD_I2C
@@ -855,14 +855,14 @@ The following options need to be configured:
 
 		I2C_INIT
 
-                (Optional). Any commands necessary to enable I2C
-                controller or configure ports.
+		(Optional). Any commands necessary to enable I2C
+		controller or configure ports.
 
 		I2C_PORT
 
-                (Only for MPC8260 CPU). The I/O port to use (the code
-                assumes both bits are on the same port). Valid values
-                are 0..3 for ports A..D.
+		(Only for MPC8260 CPU). The I/O port to use (the code
+		assumes both bits are on the same port). Valid values
+		are 0..3 for ports A..D.
 
 		I2C_ACTIVE
 
@@ -910,40 +910,40 @@ The following options need to be configured:
 
 		CONFIG_SOFT_SPI
 
-                Enables a software (bit-bang) SPI driver rather than
-                using hardware support. This is a general purpose
-                driver that only requires three general I/O port pins
-                (two outputs, one input) to function. If this is
-                defined, the board configuration must define several
-                SPI configuration items (port pins to use, etc). For
-                an example, see include/configs/sacsng.h.
+		Enables a software (bit-bang) SPI driver rather than
+		using hardware support. This is a general purpose
+		driver that only requires three general I/O port pins
+		(two outputs, one input) to function. If this is
+		defined, the board configuration must define several
+		SPI configuration items (port pins to use, etc). For
+		an example, see include/configs/sacsng.h.
 
 - FPGA Support: CONFIG_FPGA_COUNT
 
-                Specify the number of FPGA devices to support.
+		Specify the number of FPGA devices to support.
 
-                CONFIG_FPGA
+		CONFIG_FPGA
 
-                Used to specify the types of FPGA devices. For
+		Used to specify the types of FPGA devices. For
 		example,
  		#define CONFIG_FPGA  CFG_XILINX_VIRTEX2
 
  		CFG_FPGA_PROG_FEEDBACK
 
-                Enable printing of hash marks during FPGA
+		Enable printing of hash marks during FPGA
 		configuration.
 
 		CFG_FPGA_CHECK_BUSY
 
-                Enable checks on FPGA configuration interface busy
-                status by the configuration function. This option
-                will require a board or device specific function to
-                be written.
+		Enable checks on FPGA configuration interface busy
+		status by the configuration function. This option
+		will require a board or device specific function to
+		be written.
 
 		CONFIG_FPGA_DELAY
 
-                If defined, a function that provides delays in the
-                FPGA configuration driver.
+		If defined, a function that provides delays in the
+		FPGA configuration driver.
 
 		CFG_FPGA_CHECK_CTRLC
 
@@ -951,25 +951,25 @@ The following options need to be configured:
 
 		CFG_FPGA_CHECK_ERROR
 
-                Check for configuration errors during FPGA bitfile
-                loading. For example, abort during Virtex II
-                configuration if the INIT_B line goes low (which
-                indicated a CRC error).
+		Check for configuration errors during FPGA bitfile
+		loading. For example, abort during Virtex II
+		configuration if the INIT_B line goes low (which
+		indicated a CRC error).
 
 		CFG_FPGA_WAIT_INIT
 
-                Maximum time to wait for the INIT_B line to deassert
-                after PROB_B has been deasserted during a Virtex II
-                FPGA configuration sequence. The default time is 500 mS.
+		Maximum time to wait for the INIT_B line to deassert
+		after PROB_B has been deasserted during a Virtex II
+		FPGA configuration sequence. The default time is 500 mS.
 
 		CFG_FPGA_WAIT_BUSY
 
-                Maximum time to wait for BUSY to deassert during
-                Virtex II FPGA configuration. The default is 5 mS.
+		Maximum time to wait for BUSY to deassert during
+		Virtex II FPGA configuration. The default is 5 mS.
 
 		CFG_FPGA_WAIT_CONFIG
 
-                Time to wait after FPGA configuration. The default is
+		Time to wait after FPGA configuration. The default is
 		200 mS.
 
 - FPGA Support:	CONFIG_FPGA_COUNT
@@ -987,10 +987,10 @@ The following options need to be configured:
 
 		CFG_FPGA_CHECK_BUSY
 
-                Enable checks on FPGA configuration interface busy
-                status by the configuration function. This option
-                will require a board or device specific function to
-                be written.
+		Enable checks on FPGA configuration interface busy
+		status by the configuration function. This option
+		will require a board or device specific function to
+		be written.
 
 		CONFIG_FPGA_DELAY
 
@@ -1002,44 +1002,44 @@ The following options need to be configured:
 
 		CFG_FPGA_CHECK_ERROR
 
-                Check for configuration errors during FPGA bitfile
-                loading. For example, abort during Virtex II
-                configuration if the INIT_B line goes low (which
-                indicated a CRC error).
+		Check for configuration errors during FPGA bitfile
+		loading. For example, abort during Virtex II
+		configuration if the INIT_B line goes low (which
+		indicated a CRC error).
 
 		CFG_FPGA_WAIT_INIT
 
-                Maximum time to wait for the INIT_B line to deassert
-                after PROB_B has been deasserted during a Virtex II
-                FPGA configuration sequence. The default time is 500
-                mS.
+		Maximum time to wait for the INIT_B line to deassert
+		after PROB_B has been deasserted during a Virtex II
+		FPGA configuration sequence. The default time is 500
+		mS.
 
 		CFG_FPGA_WAIT_BUSY
 
-                Maximum time to wait for BUSY to deassert during
-                Virtex II FPGA configuration. The default is 5 mS.
+		Maximum time to wait for BUSY to deassert during
+		Virtex II FPGA configuration. The default is 5 mS.
 
 		CFG_FPGA_WAIT_CONFIG
 
-                Time to wait after FPGA configuration. The default is
-                200 mS.
+		Time to wait after FPGA configuration. The default is
+		200 mS.
 
 - Configuration Management:
 		CONFIG_IDENT_STRING
 
-                If defined, this string will be added to the U-Boot
-                version information (U_BOOT_VERSION)
+		If defined, this string will be added to the U-Boot
+		version information (U_BOOT_VERSION)
 
 - Vendor Parameter Protection:
 
-                U-Boot considers the values of the environment
-                variables "serial#" (Board Serial Number) and
-                "ethaddr" (Ethernet Address) to bb parameters that
-                are set once by the board vendor / manufacturer, and
-                protects these variables from casual modification by
-                the user. Once set, these variables are read-only,
-                and write or delete attempts are rejected. You can
-                change this behviour:
+		U-Boot considers the values of the environment
+		variables "serial#" (Board Serial Number) and
+		"ethaddr" (Ethernet Address) to bb parameters that
+		are set once by the board vendor / manufacturer, and
+		protects these variables from casual modification by
+		the user. Once set, these variables are read-only,
+		and write or delete attempts are rejected. You can
+		change this behviour:
 
 		If CONFIG_ENV_OVERWRITE is #defined in your config
 		file, the write protection for vendor parameters is
@@ -1099,10 +1099,10 @@ The following options need to be configured:
 
 		CONFIG_NET_RETRY_COUNT
 
-                This variable defines the number of retries for
-                network operations like ARP, RARP, TFTP, or BOOTP
-                before giving up the operation. If not defined, a
-                default value of 5 is used.
+		This variable defines the number of retries for
+		network operations like ARP, RARP, TFTP, or BOOTP
+		before giving up the operation. If not defined, a
+		default value of 5 is used.
 
 - Command Interpreter:
 		CFG_HUSH_PARSER
@@ -1125,18 +1125,18 @@ The following options need to be configured:
 
 	Note:
 
-                In the current implementation, the local variables
-                space and global environment variables space are
-                separated. Local variables are those you define by
-                simply typing like `name=value'. To access a local
-                variable later on, you have write `$name' or
-                `${name}'; variable directly by typing say `$name' at
-                the command prompt.
+		In the current implementation, the local variables
+		space and global environment variables space are
+		separated. Local variables are those you define by
+		simply typing like `name=value'. To access a local
+		variable later on, you have write `$name' or
+		`${name}'; variable directly by typing say `$name' at
+		the command prompt.
 
-                Global environment variables are those you use
-                setenv/printenv to work with. To run a command stored
-                in such a variable, you need to use the run command,
-                and you must not use the '$' sign to access them.
+		Global environment variables are those you use
+		setenv/printenv to work with. To run a command stored
+		in such a variable, you need to use the run command,
+		and you must not use the '$' sign to access them.
 
 		To store commands and special characters in a
 		variable, please use double quotation marks
@@ -1147,38 +1147,38 @@ The following options need to be configured:
 - Default Environment
 		CONFIG_EXTRA_ENV_SETTINGS
 
-                Define this to contain any number of null terminated
-                strings (variable = value pairs) that will be part of
-                the default enviroment compiled into the boot image.
+		Define this to contain any number of null terminated
+		strings (variable = value pairs) that will be part of
+		the default enviroment compiled into the boot image.
 
-                For example, place something like this in your
-                board's config file:
+		For example, place something like this in your
+		board's config file:
 
 		#define CONFIG_EXTRA_ENV_SETTINGS \
 			"myvar1=value1\0" \
 			"myvar2=value2\0"
 
-                Warning: This method is based on knowledge about the
-                internal format how the environment is stored by the
-                U-Boot code. This is NOT an official, exported
-                interface! Although it is unlikely that this format
-                will change soon, but there is no guarantee either.
+		Warning: This method is based on knowledge about the
+		internal format how the environment is stored by the
+		U-Boot code. This is NOT an official, exported
+		interface! Although it is unlikely that this format
+		will change soon, but there is no guarantee either.
 		You better know what you are doing here.
 
-                Note: overly (ab)use of the default environment is
-                discouraged. Make sure to check other ways to preset
-                the environment like the autoscript function or the
-                boot command first.
+		Note: overly (ab)use of the default environment is
+		discouraged. Make sure to check other ways to preset
+		the environment like the autoscript function or the
+		boot command first.
 
 - Show boot progress
 		CONFIG_SHOW_BOOT_PROGRESS
 
-                Defining this option allows to add some board-
-                specific code (calling a user-provided function
-                "show_boot_progress(int)") that enables you to show
-                the system's boot progress on some display (for
-                example, some LED's) on your board. At the moment,
-                the following checkpoints are implemented:
+		Defining this option allows to add some board-
+		specific code (calling a user-provided function
+		"show_boot_progress(int)") that enables you to show
+		the system's boot progress on some display (for
+		example, some LED's) on your board. At the moment,
+		the following checkpoints are implemented:
 
   Arg	Where			When
     1	common/cmd_bootm.c	before attempting to boot an image
@@ -1241,23 +1241,23 @@ Modem Support:
 - Modem debug support:
 		CONFIG_MODEM_SUPPORT_DEBUG
 
-                Enables debugging stuff (char screen[1024], dbg())
-                for modem support. Useful only with BDI2000.
+		Enables debugging stuff (char screen[1024], dbg())
+		for modem support. Useful only with BDI2000.
 
 - General:
 
-                In the target system modem support is enabled when a
-                specific key (key combination) is pressed during
-                power-on. Otherwise U-Boot will boot normally
-                (autoboot). The key_pressed() fuction is called from
-                board_init(). Currently key_pressed() is a dummy
-                function, returning 1 and thus enabling modem
-                initialization.
+		In the target system modem support is enabled when a
+		specific key (key combination) is pressed during
+		power-on. Otherwise U-Boot will boot normally
+		(autoboot). The key_pressed() fuction is called from
+		board_init(). Currently key_pressed() is a dummy
+		function, returning 1 and thus enabling modem
+		initialization.
 
-                If there are no modem init strings in the
-                environment, U-Boot proceed to autoboot; the
-                previous output (banner, info printfs) will be
-                supressed, though.
+		If there are no modem init strings in the
+		environment, U-Boot proceed to autoboot; the
+		previous output (banner, info printfs) will be
+		supressed, though.
 
 		See also: doc/README.Modem
 
@@ -1368,8 +1368,8 @@ Configuration Settings:
 		downloaded image) this option may be very useful.
 
 - CFG_FLASH_CFI:
-                Define if the flash driver uses extra elements in the
-                common flash structure for storing flash geometry
+		Define if the flash driver uses extra elements in the
+		common flash structure for storing flash geometry
 
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
@@ -1435,10 +1435,10 @@ following configurations:
 	- CFG_ENV_ADDR_REDUND
 	  CFG_ENV_SIZE_REDUND
 
-           These settings describe a second storage area used to hold
-           a redundand copy of the environment data, so that there is
-           a valid backup copy in case there is a power failur during
-           a "saveenv" operation.
+	   These settings describe a second storage area used to hold
+	   a redundand copy of the environment data, so that there is
+	   a valid backup copy in case there is a power failur during
+	   a "saveenv" operation.
 
 BE CAREFUL! Any changes to the flash layout, and some changes to the
 source code will make it necessary to adapt <board>/u-boot.lds*
@@ -1501,25 +1501,6 @@ to save the current settings.
 	- CFG_EEPROM_SIZE:
 	  The size in bytes of the EEPROM device.
 
-	- CFG_I2C_EEPROM_ADDR:
-	  If defined, specified the chip address of the EEPROM device.
-	  The default address is zero.
-
-	- CFG_EEPROM_PAGE_WRITE_BITS:
-	  If defined, the number of bits used to address bytes in a
-	  single page in the EEPROM device.  A 64 byte page, for example
-	  would require six bits.
-
-	- CFG_EEPROM_PAGE_WRITE_DELAY_MS:
-	  If defined, the number of milliseconds to delay between
-	  page writes.  The default is zero milliseconds.
-
-	- CFG_I2C_EEPROM_ADDR_LEN:
-	  The length in bytes of the EEPROM memory array address.  Note
-	  that this is NOT the chip address length!
-
-	- CFG_EEPROM_SIZE:
-	  The size in bytes of the EEPROM device.
 
 - CFG_SPI_INIT_OFFSET
 
@@ -1575,19 +1556,19 @@ Low Level (hardware related) configuration options:
 
 		CFG_ISA_IO_OFFSET
 
-                defines the offset of register from address. It
-                depends on which part of the data bus is connected to
-                the fdc chipset. (default value 0)
+		defines the offset of register from address. It
+		depends on which part of the data bus is connected to
+		the fdc chipset. (default value 0)
 
-                If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and
-                CFG_FDC_DRIVE_NUMBER are undefined, they take their
-                default value.
+		If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and
+		CFG_FDC_DRIVE_NUMBER are undefined, they take their
+		default value.
 
-                if CFG_FDC_HW_INIT is defined, then the function
-                fdc_hw_init() is called at the beginning of the FDC
-                setup. fdc_hw_init() must be provided by the board
-                source code. It is used to make hardware dependant
-                initializations.
+		if CFG_FDC_HW_INIT is defined, then the function
+		fdc_hw_init() is called at the beginning of the FDC
+		setup. fdc_hw_init() must be provided by the board
+		source code. It is used to make hardware dependant
+		initializations.
 
 - CFG_IMMR:	Physical address of the Internal Memory Mapped
 		Register; DO NOT CHANGE! (11-4)
@@ -1676,10 +1657,10 @@ Low Level (hardware related) configuration options:
 		doc/README.MBX before setting this variable!
 
 - CFG_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
-                Offset of the bootmode word in DPRAM used by post
-                (Power On Self Tests). This definition overrides
-                #define'd default value in commproc.h resp.
-                cpm_8260.h.
+		Offset of the bootmode word in DPRAM used by post
+		(Power On Self Tests). This definition overrides
+		#define'd default value in commproc.h resp.
+		cpm_8260.h.
 
 Building the Software:
 ======================
@@ -2536,6 +2517,44 @@ models provide on-chip memory (like the IMMR area on MPC8xx and
 MPC826x processors), on others (parts of) the data cache can be
 locked as (mis-) used as memory, etc.
 
+	Chris Hallinan posted a good summy of  these  issues  to  the
+	u-boot-users mailing list:
+
+	Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
+	From: "Chris Hallinan" <clh@net1plus.com>
+	Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET)
+	...
+
+	Correct me if I'm wrong, folks, but the way I understand it
+	is this: Using DCACHE as initial RAM for Stack, etc, does not
+	require any physical RAM backing up the cache. The cleverness
+	is that the cache is being used as a temporary supply of
+	necessary storage before the SDRAM controller is setup. It's
+	beyond the scope of this list to expain the details, but you
+	can see how this works by studying the cache architecture and
+	operation in the architecture and processor-specific manuals.
+
+	OCM is On Chip Memory, which I believe the 405GP has 4K. It
+	is another option for the system designer to use as an
+	initial stack/ram area prior to SDRAM being available. Either
+	option should work for you. Using CS 4 should be fine if your
+	board designers haven't used it for something that would
+	cause you grief during the initial boot! It is frequently not
+	used.
+
+	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
+	with your processor/board/system design. The default value
+	you will find in any recent u-boot distribution in
+	Walnut405.h should work for you. I'd set it to a value larger
+	than your SDRAM module. If you have a 64MB SDRAM module, set
+	it above 400_0000. Just make sure your board has no resources
+	that are supposed to respond to that address! That code in
+	start.S has been around a while and should work as is when
+	you get the config right.
+
+	-Chris Hallinan
+	DS4.COM, Inc.
+
 It is essential to remember this, since it has some impact on the C
 code for the initialization procedures:
 

board/ebony/ebony.c

@@ -21,11 +21,10 @@
  */
 
 
-extern long int spd_sdram (void);
-
 #include <common.h>
 #include "ebony.h"
 #include <asm/processor.h>
+#include <spd_sdram.h>
 
 #define BOOT_SMALL_FLASH	32	/* 00100000 */
 #define FLASH_ONBD_N		2	/* 00000010 */
@@ -113,10 +112,9 @@ int checkboard (void)
 long int initdram (int board_type)
 {
 	long dram_size = 0;
-	extern long spd_sdram (void);
 
 #if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
+	dram_size = spd_sdram (0);
 #else
 	dram_size = fixed_sdram ();
 #endif

board/emk/top860/Makefile

@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/emk/top860/flash.c

@@ -0,0 +1,490 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * copied from the BMW Port - seems that its similiar enough
+ * to be easily adaped ;) --- Well, it turned out to become a
+ * merger between parts of the EMKstax Flash routines and the
+ * BMW funtion frames...
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define	FLASH_WORD_SIZE		unsigned short
+#define FLASH_WORD_WIDTH	(sizeof (FLASH_WORD_SIZE))
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+
+/*****************************************************************************
+ * software product ID entry/exit
+ *****************************************************************************/
+static void FlashProductIdMode (
+	volatile FLASH_WORD_SIZE *b,
+	int on_off)
+{
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	b[0x5555] = on_off ? 0x90 : 0xf0;
+}
+
+/*****************************************************************************
+ * sector erase start
+ *****************************************************************************/
+static void FlashSectorErase (
+	volatile FLASH_WORD_SIZE *b,
+	volatile FLASH_WORD_SIZE *a)
+{
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	b[0x5555] = 0x80;
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	a[0] = 0x30;
+}
+
+/*****************************************************************************
+ * program a word
+ *****************************************************************************/
+static void FlashProgWord (
+	volatile FLASH_WORD_SIZE *b,
+	volatile FLASH_WORD_SIZE *a,
+	FLASH_WORD_SIZE v)
+{
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	b[0x5555] = 0xa0;
+	a[0] = v;
+}
+
+/*****************************************************************************
+ * reset bank, back to read mode
+ *****************************************************************************/
+static void FlashReset (volatile FLASH_WORD_SIZE *b)
+{
+	b[0] = 0xf0;
+}
+
+/*****************************************************************************
+ * identify FLASH chip
+ * this code is a stripped version of the FlashGetType() function in EMKstax
+ *****************************************************************************/
+unsigned long flash_init (void)
+{
+	volatile FLASH_WORD_SIZE * const flash = (volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE;
+	FLASH_WORD_SIZE	manu, dev;
+	flash_info_t * const pflinfo = &flash_info[0];
+	int j;
+
+	/* get Id Bytes */
+	FlashProductIdMode (flash, 1);
+	manu = flash[0];
+	dev  = flash[1];
+	FlashProductIdMode (flash, 0);
+
+	pflinfo->size = 0;
+	pflinfo->sector_count = 0;
+	pflinfo->flash_id = 0xffffffff;
+	pflinfo->portwidth = FLASH_CFI_16BIT;
+	pflinfo->chipwidth = FLASH_CFI_BY16;
+
+	switch (manu&0xff)
+	{
+	case 0x01:	/* AMD */
+		pflinfo->flash_id = FLASH_MAN_AMD;
+		switch (dev&0xff)
+		{
+		case 0x49:
+			pflinfo->size = 0x00200000;
+			pflinfo->sector_count = 35;
+			pflinfo->flash_id |= FLASH_AM160B;
+			pflinfo->start[0] = CFG_FLASH_BASE;
+			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
+			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
+			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
+			for (j = 4; j < 35; j++)
+			{
+				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-3);
+			}
+			break;
+
+		case 0xf9:
+			pflinfo->size = 0x00400000;
+			pflinfo->sector_count = 71;
+			pflinfo->flash_id |= FLASH_AM320B;
+			pflinfo->start[0] = CFG_FLASH_BASE;
+			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
+			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
+			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
+			for (j = 0; j < 8; j++)
+			{
+				pflinfo->start[j] = CFG_FLASH_BASE + 0x00002000 * (j);
+			}
+			for (j = 8; j < 71; j++)
+			{
+				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-7);
+			}
+			break;
+
+		default:
+			printf ("unknown AMD dev=%x ", dev);
+			pflinfo->flash_id |= FLASH_UNKNOWN;
+		}
+		break;
+
+	default:
+		printf ("unknown manu=%x ", manu);
+	}
+	return pflinfo->size;
+}
+
+/*****************************************************************************
+ * print info about a FLASH
+ *****************************************************************************/
+void flash_print_info (flash_info_t *info)
+{
+	static const char	unk[] = "Unknown";
+	unsigned int		i;
+	const char			*mfct=unk,
+						*type=unk;
+
+	if(info->flash_id != FLASH_UNKNOWN)
+	{
+		switch (info->flash_id & FLASH_VENDMASK)
+		{
+		case FLASH_MAN_AMD:
+			mfct = "AMD";
+			break;
+		}
+
+		switch (info->flash_id & FLASH_TYPEMASK)
+		{
+		case FLASH_AM160B:
+			type = "AM29LV160B (16 Mbit, bottom boot sect)";
+			break;
+		case FLASH_AM320B:
+			type = "AM29LV320B (32 Mbit, bottom boot sect)";
+			break;
+		}
+	}
+
+	printf (
+		"\n  Brand: %s Type: %s\n"
+		"  Size: %lu KB in %d Sectors\n",
+		mfct,
+		type,
+		info->size >> 10,
+		info->sector_count
+		);
+
+	printf ("  Sector Start Addresses:");
+
+	for (i = 0; i < info->sector_count; i++)
+	{
+		unsigned long	size;
+		unsigned int	erased;
+		unsigned long	*flash = (unsigned long *) info->start[i];
+
+		/*
+		 * Check if whole sector is erased
+		 */
+		size =
+			(i != (info->sector_count - 1)) ?
+			(info->start[i + 1] - info->start[i]) >> 2 :
+		(info->start[0] + info->size - info->start[i]) >> 2;
+
+		for (
+			flash = (unsigned long *) info->start[i], erased = 1;
+				(flash != (unsigned long *) info->start[i] + size) && erased;
+					flash++
+			)
+			erased = *flash == ~0x0UL;
+
+		printf (
+			"%s %08lX %s %s",
+			(i % 5) ? "" : "\n   ",
+			info->start[i],
+			erased ? "E" : " ",
+			info->protect[i] ? "RO" : "  "
+			);
+	}
+
+	puts ("\n");
+	return;
+}
+
+/*****************************************************************************
+ * erase one or more sectors
+ *****************************************************************************/
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE	*addr = (FLASH_WORD_SIZE *)(info->start[0]);
+	int							flag,
+								prot,
+								sect,
+								l_sect;
+	ulong						start,
+								now,
+								last;
+
+	if ((s_first < 0) || (s_first > s_last))
+	{
+		if (info->flash_id == FLASH_UNKNOWN)
+		{
+			printf ("- missing\n");
+		}
+		else
+		{
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+		(info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP)))
+	{
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect)
+	{
+		if (info->protect[sect])
+		{
+			prot++;
+		}
+	}
+
+	if (prot)
+	{
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	}
+	else
+	{
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++)
+	{
+		if (info->protect[sect] == 0)
+		{ /* not protected */
+			FlashSectorErase ((FLASH_WORD_SIZE *)info->start[0], (FLASH_WORD_SIZE *)info->start[sect]);
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	* We wait for the last triggered sector
+	*/
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (FLASH_WORD_SIZE *)info->start[l_sect];
+	while ((addr[0] & 0x0080) != 0x0080)
+	{
+		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT)
+		{
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000)
+		{  /* every second */
+			serial_putc ('.');
+			last = now;
+		}
+	}
+
+	DONE:
+	/* reset to read mode */
+	FlashReset ((FLASH_WORD_SIZE *)info->start[0]);
+
+	printf (" done\n");
+	return 0;
+}
+
+/*****************************************************************************
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ *****************************************************************************/
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong		cp,
+				wp,
+				data;
+	int			i,
+				l,
+				rc;
+
+	wp = (addr & ~(FLASH_WORD_WIDTH-1));   /* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes, if there are...
+	 */
+	if ((l = addr - wp) != 0)
+	{
+		data = 0;
+		
+		/* get the current before the new data into our data word */
+		for (i=0, cp=wp; i<l; ++i, ++cp)
+		{
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		
+		/* now merge the to be programmed values */
+		for (; i<4 && cnt>0; ++i, ++cp, --cnt)
+		{
+			data = (data << 8) | *src++;
+		}
+
+		/* get the current after the new data into our data word */
+		for (; cnt==0 && i<FLASH_WORD_WIDTH; ++i, ++cp)
+		{
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		/* now write the combined word */
+		if ((rc = write_word (info, wp, data)) != 0)
+		{
+			return (rc);
+		}
+		wp += FLASH_WORD_WIDTH;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= FLASH_WORD_WIDTH)
+	{
+		data = 0;
+		for (i=0; i<FLASH_WORD_WIDTH; ++i)
+		{
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word (info, wp, data)) != 0)
+		{
+			return (rc);
+		}
+		wp  += FLASH_WORD_WIDTH;
+		cnt -= FLASH_WORD_WIDTH;
+	}
+
+	if (cnt == 0)
+	{
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes, if there are...
+	 */
+	data = 0;
+
+	/* now merge the to be programmed values */
+	for (i=0, cp=wp; i<FLASH_WORD_WIDTH && cnt>0; ++i, ++cp)
+	{
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+
+	/* get the current after the new data into our data word */
+	for (; i<FLASH_WORD_WIDTH; ++i, ++cp)
+	{
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	/* now write the combined word */
+	return (write_word (info, wp, data));
+}
+
+/*****************************************************************************
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ *****************************************************************************/
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE	*addr2 = (FLASH_WORD_SIZE *)info->start[0];
+	volatile FLASH_WORD_SIZE	*dest2 = (FLASH_WORD_SIZE *)dest;
+	FLASH_WORD_SIZE				data2 = data;
+	ulong						start;
+	int							flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*dest2 & data2) != data2)
+	{
+		return (2);
+	}
+	
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	FlashProgWord (addr2, dest2, data2);
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*dest2 & 0x0080) != (data2 & 0x0080))
+	{
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+		{
+			return (1);
+		}
+	}
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+

board/emk/top860/top860.c

@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * Board specific routines for the TOP860
+ *
+ * - initialisation
+ * - interface to VPD data (mac address, clock speeds)
+ * - memory controller
+ * - serial io initialisation
+ * - ethernet io initialisation
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <mpc8xx.h>
+
+/*****************************************************************************
+ * UPM table for 60ns EDO RAM at 25 MHz bus/external clock
+ *****************************************************************************/
+static const uint edo_60ns_25MHz_tbl[] = {
+
+/* single read   (offset 0x00 in upm ram) */
+    0x0ff3fc04,0x08f3fc04,0x00f3fc04,0x00f3fc00,
+    0x33f7fc07,0xfffffc05,0xfffffc05,0xfffffc05,
+/* burst read    (offset 0x08 in upm ram) */
+    0x0ff3fc04,0x08f3fc04,0x00f3fc0c,0x0ff3fc40,
+    0x0cf3fc04,0x03f3fc48,0x0cf3fc04,0x03f3fc48,
+    0x0cf3fc04,0x03f3fc00,0x3ff7fc07,0xfffffc05,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* single write  (offset 0x18 in upm ram) */
+    0x0ffffc04,0x08fffc04,0x30fffc00,0xf1fffc07,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* burst write   (offset 0x20 in upm ram) */
+    0x0ffffc04,0x08fffc00,0x00fffc04,0x03fffc4c,
+    0x00fffc00,0x07fffc4c,0x00fffc00,0x0ffffc4c,
+    0x00fffc00,0x3ffffc07,0xfffffc05,0xfffffc05,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* refresh       (offset 0x30 in upm ram) */
+    0xc0fffc04,0x07fffc04,0x0ffffc04,0x0ffffc04,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* exception     (offset 0x3C in upm ram) */
+    0xfffffc07,0xfffffc03,0xfffffc05,0xfffffc05,
+};
+
+/*****************************************************************************
+ * Print Board Identity
+ *****************************************************************************/
+int checkboard (void)
+{
+	puts ("Board:"CONFIG_IDENT_STRING"\n");
+	return (0);
+}
+
+/*****************************************************************************
+ * Initialize DRAM controller
+ *****************************************************************************/
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	/*
+	 * Only initialize memory controller when running from FLASH.
+	 * When running from RAM, don't touch it.
+	 */
+	if ((ulong) initdram & 0xff000000)
+	{
+		volatile uint	*addr1, *addr2;
+		uint			i, j;
+
+		upmconfig (UPMA, (uint *) edo_60ns_25MHz_tbl,
+			sizeof (edo_60ns_25MHz_tbl) / sizeof (uint));
+		memctl->memc_mptpr = 0x0200;
+		memctl->memc_mamr = 0x0ca20330;
+		memctl->memc_or2 = -CFG_DRAM_MAX | OR_CSNT_SAM;
+		memctl->memc_br2 = CFG_DRAM_BASE | BR_MS_UPMA | BR_V;
+		/*
+		 * Do 8 read accesses to DRAM
+		 */
+		addr1 = (volatile uint*) 0;
+		addr2 = (volatile uint*) 0x00400000;
+		for (i=0, j=0; i<8; i++)
+			j = addr1[0];
+		
+		/*
+		 * Now check whether we got 4MB or 16MB populated
+		 */
+		addr1[0] = 0x12345678;
+		addr1[1] = 0x9abcdef0;
+		addr2[0] = 0xfeedc0de;
+		addr2[1] = 0x47110815;
+		if (addr1[0] == 0xfeedc0de && addr1[1] == 0x47110815)
+		{
+			/* only 4MB populated */
+			memctl->memc_or2 = -(CFG_DRAM_MAX/4) | OR_CSNT_SAM;
+		}
+	}
+
+	return -(memctl->memc_or2 & 0xffff0000);
+}
+
+/*****************************************************************************
+ * otherinits after RAM is there and we are relocated to RAM
+ * note: though this is an int function, nobody cares for the result!
+ *****************************************************************************/
+int misc_init_r (void)
+{
+	/* read 'factory' part of EEPROM */
+	uchar				buf[81];
+	uchar				*p;
+	uint				length;
+	uint				addr;
+	uint				len;
+
+	/* get length first */
+	addr = CFG_FACT_OFFSET;
+	if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2))
+	{
+bailout:
+		printf ("cannot read factory configuration\n");
+		printf ("be sure to set ethaddr	yourself!\n");
+		return 0;
+	}
+	length = buf[0] + (buf[1]<<8);
+	addr += 2;
+
+	/* sanity check */
+	if (length < 20 || length > CFG_FACT_SIZE-2)
+		goto bailout;
+
+	/* read lines */
+	while (length > 0)
+	{
+		/* read one line */
+		len = length > 80 ? 80 : length;
+		if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
+			goto bailout;
+		/* mark end of buffer */
+		buf[len] = 0;
+		/* search end of line */
+		for (p=buf; *p && *p != 0x0a; p++) ;
+		if (!*p)
+			goto bailout;
+		*p++ = 0;
+		/* advance to next line start */
+		length -= p-buf;
+		addr += p-buf;
+		/*printf ("%s\n", buf);*/
+		/* search for our specific entry */
+		if (!strncmp ((char *)buf, "[RLA/lan/Ethernet] ", 19))
+		{
+			setenv ("ethaddr", buf+19);
+		} 
+		else if (!strncmp ((char *)buf, "[BOARD/SERIAL] ", 15))
+		{
+			setenv ("serial#", buf+15);
+		} 
+		else if (!strncmp ((char *)buf, "[BOARD/TYPE] ", 13))
+		{
+			setenv ("board_id", buf+13);
+		} 
+	}
+	return (0);
+}
+

board/emk/top860/u-boot.lds

@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc8xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+

board/emk/top860/u-boot.lds.debug

@@ -0,0 +1,132 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+

board/evb64260/evb64260.c

@@ -315,8 +315,10 @@ int misc_init_r (void)
 }
 
 void
-after_reloc(gd_t *gd, ulong dest_addr)
+after_reloc(ulong dest_addr)
 {
+	DECLARE_GLOBAL_DATA_PTR;
+
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */

board/evb64260/pci.c

@@ -52,6 +52,7 @@ static const unsigned int pci_scs_bank_size[2][4] = {
 static const unsigned int pci_p2p_configuration[] = {
     PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION};
 
+static unsigned int local_buses[] = { 0, 0};
 /********************************************************************
 * pciWriteConfigReg - Write to a PCI configuration register
 *                    - Make sure the GT is configured as a master before writing
@@ -74,7 +75,7 @@ void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,unsigned int pciDev
 {
     volatile unsigned int DataForAddrReg;
     unsigned int functionNum;
-    unsigned int busNum = 0;
+    unsigned int busNum = PCI_BUS(pciDevNum);
     unsigned int addr;
 
     if(pciDevNum > 32) /* illegal device Number */
@@ -117,7 +118,7 @@ unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,unsigned in
     volatile unsigned int DataForAddrReg;
    	unsigned int data;
     unsigned int functionNum;
-    unsigned int busNum = 0;
+    unsigned int busNum = PCI_BUS(pciDevNum);
 
     if(pciDevNum > 32) /* illegal device Number */
         return 0xffffffff;
@@ -531,16 +532,32 @@ static int gt_read_config_dword(struct pci_controller *hose,
 				pci_dev_t dev,
 				int offset, u32* value)
 {
-    *value = pciReadConfigReg((PCI_HOST) hose->cfg_addr, offset, PCI_DEV(dev));
-    return 0;
+	int bus = PCI_BUS(dev);
+	
+	if ((bus == local_buses[0]) || (bus == local_buses[1])){
+		*value = pciReadConfigReg((PCI_HOST) hose->cfg_addr, offset, 
+					  PCI_DEV(dev));
+	} else {
+		*value = pciOverBridgeReadConfigReg((PCI_HOST) hose->cfg_addr, 
+						    offset, PCI_DEV(dev), bus);
+	}
+	return 0;
 }
 
 static int gt_write_config_dword(struct pci_controller *hose,
 				 pci_dev_t dev,
 				 int offset, u32 value)
 {
-    pciWriteConfigReg((PCI_HOST)hose->cfg_addr, offset, PCI_DEV(dev), value);
-    return 0;
+	int bus = PCI_BUS(dev);
+
+	if ((bus == local_buses[0]) || (bus == local_buses[1])){
+		pciWriteConfigReg((PCI_HOST)hose->cfg_addr, offset, 
+				  PCI_DEV(dev), value);
+	} else {
+		pciOverBridgeWriteConfigReg((PCI_HOST)hose->cfg_addr, offset, 
+					    PCI_DEV(dev), value, bus);
+	}
+	return 0;
 }
 
 /*
@@ -603,7 +620,7 @@ pci_init_board(void)
 
     pci0_hose.first_busno = 0;
     pci0_hose.last_busno = 0xff;
-
+    local_buses[0] = pci0_hose.first_busno;
     /* PCI memory space */
     pci_set_region(pci0_hose.regions + 0,
 		   CFG_PCI0_0_MEM_SPACE,
@@ -647,6 +664,8 @@ pci_init_board(void)
 
     pci1_hose.first_busno = pci0_hose.last_busno + 1;
     pci1_hose.last_busno = 0xff;
+    pci1_hose.current_busno = pci0_hose.current_busno;
+    local_buses[1] = pci1_hose.first_busno;
 
     /* PCI memory space */
     pci_set_region(pci1_hose.regions + 0,

board/innokom/Makefile

@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= innokom.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/innokom/config.mk

@@ -0,0 +1,16 @@
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to c170'0000, the upper 1 MB of second bank
+#
+# download areas is c800'0000
+#
+
+# This is the address where U-Boot lives in flash:
+#TEXT_BASE = 0
+
+# FIXME: armboot does only work correctly when being compiled
+# for the addresses _after_ relocation to RAM!! Otherwhise the
+# .bss segment is assumed in flash...
+TEXT_BASE = 0xa1fe0000
+

board/innokom/flash.c

@@ -0,0 +1,377 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+#define FLASH_BANK_SIZE 0x02000000
+#define MAIN_SECT_SIZE  0x40000         /* 2x16 = 256k per sector */
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+/**
+ * flash_init: - initialize data structures for flash chips
+ *
+ * @return: size of the flash
+ */
+
+ulong flash_init(void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+		flash_info[i].flash_id =
+	  		(INTEL_MANUFACT & FLASH_VENDMASK) |
+	  		(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+
+		switch (i) {
+			case 0:
+				flashbase = PHYS_FLASH_1;
+				break;
+			default:
+				panic("configured to many flash banks!\n");
+				break;
+		}
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors */
+	flash_protect(FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+			&flash_info[0]);
+
+#ifdef CFG_ENV_IS_IN_FLASH
+	flash_protect(FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			&flash_info[0]);
+#endif
+
+	return size;
+}
+
+
+/**
+ * flash_print_info: - print information about the flash situation
+ *
+ * @param info:
+ */
+
+void flash_print_info  (flash_info_t *info)
+{
+	int i, j;
+
+	for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+
+		switch (info->flash_id & FLASH_VENDMASK) {
+
+			case (INTEL_MANUFACT & FLASH_VENDMASK):
+				printf("Intel: ");
+				break;
+			default:
+				printf("Unknown Vendor ");
+				break;
+		}
+
+		switch (info->flash_id & FLASH_TYPEMASK) {
+
+			case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+				printf("28F128J3 (128Mbit)\n");
+				break;
+			default:
+				printf("Unknown Chip Type\n");
+				return;
+		}
+
+		printf("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+		printf("  Sector Start Addresses:");
+		for (i = 0; i < info->sector_count; i++) {
+			if ((i % 5) == 0) printf ("\n   ");
+
+			printf (" %08lX%s", info->start[i],
+				info->protect[i] ? " (RO)" : "     ");
+		}
+		printf ("\n");
+		info++;
+	}
+}
+
+
+/**
+ * flash_erase: - erase flash sectors
+ *
+ */
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	int rc = ERR_OK;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
+		return ERR_UNKNOWN_FLASH_VENDOR;
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) prot++;
+	}
+
+	if (prot) return ERR_PROTECTED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+
+		printf("Erasing sector %2d ... ", sect);
+
+		/* arm simple, non interrupt dependent timer */
+		reset_timer_masked();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			u32 * volatile addr = (u32 * volatile)(info->start[sect]);
+
+			/* erase sector:                                    */
+			/* The strata flashs are aligned side by side on    */
+			/* the data bus, so we have to write the commands   */
+			/* to both chips here:                              */
+
+			*addr = 0x00200020;	/* erase setup */
+			*addr = 0x00D000D0;	/* erase confirm */
+
+			while ((*addr & 0x00800080) != 0x00800080) {
+				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+					*addr = 0x00B000B0; /* suspend erase*/
+					*addr = 0x00FF00FF; /* read mode    */
+					rc = ERR_TIMOUT;
+					goto outahere;
+				}
+			}
+
+			*addr = 0x00500050; /* clear status register cmd.   */
+			*addr = 0x00FF00FF; /* resest to read mode          */
+
+		}
+
+		printf("ok.\n");
+	}
+
+	if (ctrlc()) printf("User Interrupt!\n");
+
+	outahere:
+
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked(10000);
+
+	if (flag) enable_interrupts();
+
+	return rc;
+}
+
+
+/**
+ * write_word: - copy memory to flash
+ *
+ * @param info:
+ * @param dest:
+ * @param data:
+ * @return:
+ */
+
+static int write_word (flash_info_t *info, ulong dest, ushort data)
+{
+	ushort *addr = (ushort *)dest, val;
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts();
+
+	/* clear status register command */
+	*addr = 0x50;
+
+	/* program set-up command */
+	*addr = 0x40;
+
+	/* latch address/data */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+
+	/* wait while polling the status register */
+	while(((val = *addr) & 0x80) != 0x80) {
+		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+			rc = ERR_TIMOUT;
+			*addr = 0xB0; /* suspend program command */
+			goto outahere;
+		}
+	}
+
+	if(val & 0x1A) {	/* check for error */
+		printf("\nFlash write error %02x at address %08lx\n",
+			(int)val, (unsigned long)dest);
+		if(val & (1<<3)) {
+			printf("Voltage range error.\n");
+			rc = ERR_PROG_ERROR;
+			goto outahere;
+		}
+		if(val & (1<<1)) {
+			printf("Device protect error.\n");
+			rc = ERR_PROTECTED;
+			goto outahere;
+		}
+		if(val & (1<<4)) {
+			printf("Programming error.\n");
+			rc = ERR_PROG_ERROR;
+			goto outahere;
+		}
+		rc = ERR_PROG_ERROR;
+		goto outahere;
+	}
+
+	outahere:
+
+	*addr = 0xFF; /* read array command */
+	if (flag) enable_interrupts();
+
+	return rc;
+}
+
+
+/**
+ * write_buf: - Copy memory to flash.
+ *
+ * @param info:
+ * @param src:	source of copy transaction
+ * @param addr:	where to copy to
+ * @param cnt: 	number of bytes to copy
+ *
+ * @return	error code
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	ushort data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *)cp << 8);
+		}
+		for (; i<2 && cnt>0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *)cp << 8);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		/* data = *((vushort*)src); */
+		data = *((ushort*)src);
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 2;
+		wp  += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0) return ERR_OK;
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i<2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *)cp << 8);
+	}
+
+	return write_word(info, wp, data);
+}
+

board/innokom/innokom.c

@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2002
+ * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
+ * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
+ * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+
+/**
+ * board_init: - setup some data structures
+ *
+ * @return: 0 in case of success
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* arch number of Innokom board */
+	gd->bd->bi_arch_number = 258;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+
+/**
+ * dram_init: - setup dynamic RAM
+ *
+ * @return: 0 in case of success
+ */
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+
+/**
+ * innokom_set_led: - switch LEDs on or off
+ *
+ * @param led:   LED to switch (0,1,2)
+ * @param state: switch on (1) or off (0)
+ */
+
+void innokom_set_led(int led, int state)
+{
+	switch(led) {
+/*
+		case 0: if (state==1) {
+				GPCR0 |= CSB226_USER_LED0;
+			} else if (state==0) {
+				GPSR0 |= CSB226_USER_LED0;
+			}
+			break;
+
+		case 1: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED1;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED1;
+                        }
+                        break;
+
+		case 2: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED2;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED2;
+                        }
+                        break;
+*/
+	}
+
+	return;
+}
+
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
+ */
+
+void show_boot_progress (int status)
+{
+	switch(status) {
+/*
+		case  1: csb226_set_led(0,1); break;
+		case  5: csb226_set_led(1,1); break;
+		case 15: csb226_set_led(2,1); break;
+*/
+	}
+
+	return;
+}
+

board/innokom/memsetup.S

@@ -0,0 +1,429 @@
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/memsetup.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE:  .long   CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+   .macro CPWAIT reg
+   mrc  p15,0,\reg,c2,c0,0
+   mov  \reg,\reg
+   sub  pc,pc,#4
+   .endm
+
+
+/*
+ * 	Memory setup
+ */
+
+.globl memsetup
+memsetup:
+
+    mov      r10, lr
+
+	/* Set up GPIO pins first ----------------------------------------- */
+
+	ldr		r0,	=GPSR0
+	ldr		r1,	=CFG_GPSR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR1
+	ldr		r1,	=CFG_GPSR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR2
+	ldr		r1,	=CFG_GPSR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR0
+	ldr		r1,	=CFG_GPCR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR1
+	ldr		r1,	=CFG_GPCR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR2
+	ldr		r1,	=CFG_GPCR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR0
+	ldr		r1,	=CFG_GPDR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR1
+	ldr		r1,	=CFG_GPDR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR2
+	ldr		r1,	=CFG_GPDR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_L
+	ldr		r1,	=CFG_GAFR0_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_U
+	ldr		r1,	=CFG_GAFR0_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_L
+	ldr		r1,	=CFG_GAFR1_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_U
+	ldr		r1,	=CFG_GAFR1_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_L
+	ldr		r1,	=CFG_GAFR2_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_U
+	ldr		r1,	=CFG_GAFR2_U_VAL
+	str		r1,   [r0]
+
+	ldr	r0,	=PSSR		/* enable GPIO pins */
+	ldr		r1,	=CFG_PSSR_VAL
+	str		r1,   [r0]
+
+/*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
+/*	ldr	r2,	=CFG_MSC1_VAL	/  high - bank 3 Ethernet Controller */
+/*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
+/*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
+/* */
+/*	ldr	r1,	=LED_BLANK */
+/*	mov	r0,	#0xFF */
+/*	str	r0,	[r1]		/  turn on hex leds */
+/* */
+/*loop: */
+/* */
+/*   ldr	r0, =0xB0070001 */
+/*   ldr    	r1, =_LED */
+/*   str    	r0, [r1]		/  hex display */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Enable memory interface                                          */
+	/*                                                                  */
+	/* The sequence below is based on the recommended init steps        */
+	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
+	/* Chapter 10.                                                      */
+	/* ---------------------------------------------------------------- */
+
+	/* ---------------------------------------------------------------- */
+	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
+	/*         clocks to settle. Only necessary after hard reset...     */
+	/*         FIXME: can be optimized later                            */
+	/* ---------------------------------------------------------------- */
+
+	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
+	mov r2, #0
+	str r2, [r3]
+	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
+					/* so 0x300 should be plenty        */
+1:
+	ldr r2, [r3]
+	cmp r4, r2
+	bgt 1b
+
+mem_init:
+
+        ldr     r1,  =MEMC_BASE		/* get memory controller base addr. */
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2a: Initialize Asynchronous static memory controller        */
+	/* ---------------------------------------------------------------- */
+
+	/* MSC registers: timing, bus width, mem type                       */
+
+        /* MSC0: nCS(0,1)                                                   */
+        ldr     r2,   =CFG_MSC0_VAL
+        str     r2,   [r1, #MSC0_OFFSET]
+        ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
+						/* that data latches        */
+        /* MSC1: nCS(2,3)                                                   */
+        ldr     r2,  =CFG_MSC1_VAL
+        str     r2,  [r1, #MSC1_OFFSET]
+        ldr     r2,  [r1, #MSC1_OFFSET]
+
+	/* MSC2: nCS(4,5)                                                   */
+        ldr     r2,  =CFG_MSC2_VAL
+        str     r2,  [r1, #MSC2_OFFSET]
+        ldr     r2,  [r1, #MSC2_OFFSET]
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2b: Initialize Card Interface                               */
+	/* ---------------------------------------------------------------- */
+
+	/* MECR: Memory Expansion Card Register                             */
+        ldr     r2,  =CFG_MECR_VAL
+        str     r2,  [r1, #MECR_OFFSET]
+	ldr	r2,	[r1, #MECR_OFFSET]
+
+	/* MCMEM0: Card Interface slot 0 timing                             */
+        ldr     r2,  =CFG_MCMEM0_VAL
+        str     r2,  [r1, #MCMEM0_OFFSET]
+	ldr	r2,	[r1, #MCMEM0_OFFSET]
+
+        /* MCMEM1: Card Interface slot 1 timing                             */
+        ldr     r2,  =CFG_MCMEM1_VAL
+        str     r2,  [r1, #MCMEM1_OFFSET]
+	ldr	r2,	[r1, #MCMEM1_OFFSET]
+
+	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
+        ldr     r2,  =CFG_MCATT0_VAL
+        str     r2,  [r1, #MCATT0_OFFSET]
+	ldr	r2,	[r1, #MCATT0_OFFSET]
+
+	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
+        ldr     r2,  =CFG_MCATT1_VAL
+        str     r2,  [r1, #MCATT1_OFFSET]
+	ldr	r2,	[r1, #MCATT1_OFFSET]
+
+	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
+        ldr     r2,  =CFG_MCIO0_VAL
+        str     r2,  [r1, #MCIO0_OFFSET]
+	ldr	r2,	[r1, #MCIO0_OFFSET]
+
+	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
+        ldr     r2,  =CFG_MCIO1_VAL
+        str     r2,  [r1, #MCIO1_OFFSET]
+	ldr	r2,	[r1, #MCIO1_OFFSET]
+
+	/* ---------------------------------------------------------------- */
+        /* Step 2c: Write FLYCNFG  FIXME: what's that???                    */
+        /* ---------------------------------------------------------------- */
+
+
+	/* ---------------------------------------------------------------- */
+        /* Step 2d: Initialize Timing for Sync Memory (SDCLK0)              */
+        /* ---------------------------------------------------------------- */
+
+	/* Before accessing MDREFR we need a valid DRI field, so we set     */
+	/* this to power on defaults + DIR field.                           */
+
+	ldr	r4,	=0x03ca4fff
+	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
+        ldr     r4,	[r1, #MDREFR_OFFSET]
+
+	ldr	r4,	=0x03ca4030
+	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
+	ldr	r4,	[r1, #MDREFR_OFFSET]
+
+        /* Note: preserve the mdrefr value in r4                            */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
+	/* ---------------------------------------------------------------- */
+
+	/* Initialize SXCNFG register. Assert the enable bits               */
+
+	/* Write SXMRS to cause an MRS command to all enabled banks of      */
+	/* synchronous static memory. Note that SXLCR need not be written   */
+	/* at this time.                                                    */
+
+	/* FIXME: we use async mode for now                                 */
+
+
+        /* ---------------------------------------------------------------- */
+        /* Step 4: Initialize SDRAM                                         */
+        /* ---------------------------------------------------------------- */
+
+	/* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure      */
+	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
+
+	orr	r4,	r4,	#(MDREFR_K1RUN|MDREFR_K0RUN)
+
+	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+	ldr     r4,     [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
+
+	bic	r4,	r4,	#(MDREFR_SLFRSH)
+
+        str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+        ldr     r4,     [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4c: assert MDREFR:E1PIN and E0PIO                           */
+
+	orr	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
+
+        str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+        ldr     r4,     [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
+	/*          configure but not enable each SDRAM partition pair.     */
+
+	ldr	r4,	=CFG_MDCNFG_VAL
+	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
+
+        str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
+        ldr     r4,     [r1, #MDCNFG_OFFSET]
+
+
+	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,          */
+	/*          100..200 <20>sec.                                          */
+
+	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
+	mov r2, #0
+	str r2, [r3]
+	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
+					/* so 0x300 should be plenty        */
+1:
+	ldr r2, [r3]
+	cmp r4, r2
+	bgt 1b
+
+
+	/* Step 4f: Trigger a number (usually 8) refresh cycles by          */
+	/*          attempting non-burst read or write accesses to disabled */
+	/*          SDRAM, as commonly specified in the power up sequence   */
+	/*          documented in SDRAM data sheets. The address(es) used   */
+	/*          for this purpose must not be cacheable.                 */
+
+	ldr	r3,	=CFG_DRAM_BASE
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+
+
+	/* Step 4g: Write MDCNFG with enable bits asserted                  */
+	/*          (MDCNFG:DEx set to 1).                                  */
+
+	ldr	r3, [r1, #MDCNFG_OFFSET]
+	orr	r3,	r3,	#(MDCNFG_DE0|MDCNFG_DE1)
+	str	r3, [r1, #MDCNFG_OFFSET]
+
+	/* Step 4h: Write MDMRS.                                            */
+
+        ldr     r2,  =CFG_MDMRS_VAL
+        str     r2,  [r1, #MDMRS_OFFSET]
+
+
+	/* We are finished with Intel's memory controller initialisation    */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Disable (mask) all interrupts at interrupt controller            */
+	/* ---------------------------------------------------------------- */
+
+initirqs:
+
+        mov     r1, #0		/* clear int. level register (IRQ, not FIQ) */
+        ldr     r2,  =ICLR
+        str     r1,  [r2]
+
+        ldr     r2,  =ICMR	/* mask all interrupts at the controller    */
+        str     r1,  [r2]
+
+
+        /* ---------------------------------------------------------------- */
+	/* Clock initialisation                                             */
+        /* ---------------------------------------------------------------- */
+
+initclks:
+
+	/* Disable the peripheral clocks, and set the core clock frequency  */
+	/* (hard-coding at 398.12MHz for now).                              */
+
+	/* Turn Off ALL on-chip peripheral clocks for re-configuration      */
+	/* Note: See label 'ENABLECLKS' for the re-enabling                 */
+        ldr     r1,  =CKEN
+        mov     r2,  #0
+        str     r2,  [r1]
+
+
+        /* default value in case no valid rotary switch setting is found    */
+        ldr     r2, =(CCCR_L27|CCCR_M2|CCCR_N10)  /* DEFAULT: {200/200/100} */
+
+        /* ... and write the core clock config register                     */
+        ldr     r1,  =CCCR
+        str     r2,  [r1]
+
+	/* enable the 32Khz oscillator for RTC and PowerManager             */
+/*
+        ldr     r1,  =OSCC
+        mov     r2,  #OSCC_OON
+        str     r2,  [r1]
+*/
+	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL         */
+	/* has settled.                                                     */
+60:
+        ldr     r2, [r1]
+        ands    r2, r2, #1
+        beq     60b
+
+	/* ---------------------------------------------------------------- */
+	/*                                                                  */
+        /* ---------------------------------------------------------------- */
+
+	/* Save SDRAM size                                                  */
+	ldr	r1, =DRAM_SIZE
+	str	r8, [r1]
+
+	/* Interrupt init: Mask all interrupts                              */
+	ldr	r0, =ICMR			/* enable no sources        */
+	mov	r1, #0
+	str	r1, [r0]
+
+	/* FIXME */
+
+#define NODEBUG
+#ifdef NODEBUG
+	/*Disable software and data breakpoints */
+	mov	r0,#0
+	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
+	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
+	mcr	p15,0,r0,c14,c4,0  /* dbcon */
+
+	/*Enable all debug functionality */
+	mov	r0,#0x80000000
+	mcr	p14,0,r0,c10,c0,0  /* dcsr */
+
+#endif
+
+        /* ---------------------------------------------------------------- */
+	/* End memsetup                                                     */
+        /* ---------------------------------------------------------------- */
+
+endmemsetup:
+
+    mov     pc, lr
+

board/innokom/u-boot.lds

@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+        . = 0x00000000;
+
+        . = ALIGN(4);
+	.text      :
+	{
+	  cpu/xscale/start.o	(.text)
+	  *(.text)
+	}
+
+        . = ALIGN(4);
+        .rodata : { *(.rodata) }
+
+        . = ALIGN(4);
+        .data : { *(.data) }
+
+        . = ALIGN(4);
+        .got : { *(.got) }
+
+	armboot_end_data = .;
+
+        . = ALIGN(4);
+        .bss : { *(.bss) }
+
+	armboot_end = .;
+}

board/lubbock/config.mk

@@ -1,12 +1,3 @@
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c170'0000, the upper 1 MB of second bank
-#
-# download areas is c800'0000
-#
-
-
 #TEXT_BASE = 0xa1700000
 TEXT_BASE = 0xa3000000
 #TEXT_BASE = 0

board/lubbock/flash.c

@@ -1,10 +1,9 @@
 /*
- * (C) Copyright 2002
+ * (C) Copyright 2001
  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -26,46 +25,62 @@
  */
 
 #include <common.h>
+#include <linux/byteorder/swab.h>
 
-#define FLASH_BANK_SIZE 0x2000000
-#define MAIN_SECT_SIZE  0x40000         /* 2x16 = 256k per sector */
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
+/* Board support for 1 or 2 flash devices */
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)               __swab16(x)
+#else
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)               __swab32(x)
+#endif
+
+#define FPW	   FLASH_PORT_WIDTH
+#define FPWV   FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int   write_data (flash_info_t *info, ulong dest, FPW data);
+static void  flash_get_offsets (ulong base, flash_info_t *info);
+void inline  spin_wheel(void);
 
 /*-----------------------------------------------------------------------
  */
 
-ulong flash_init(void)
+unsigned long flash_init (void)
 {
-    int i, j;
+   int i;
     ulong size = 0;
 
     for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
     {
-	ulong flashbase = 0;
-	flash_info[i].flash_id =
-	  (INTEL_MANUFACT & FLASH_VENDMASK) |
-	  (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
         switch (i)
         {
            case 0:
-	        flashbase = PHYS_FLASH_1;
+            flash_get_size((FPW *)PHYS_FLASH_1, &flash_info[i]);
+	         flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
                 break;
            case 1:
-	        flashbase = PHYS_FLASH_2;
+            flash_get_size((FPW *)PHYS_FLASH_2, &flash_info[i]);
+	         flash_get_offsets(PHYS_FLASH_2, &flash_info[i]);
                 break;
            default:
 	        panic("configured to many flash banks!\n");
                 break;
         }
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
-	    flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-	}
 	size += flash_info[i].size;
     }
 
@@ -84,73 +99,142 @@ ulong flash_init(void)
     return size;
 }
 
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+			info->protect[i] = 0;
+		}
+	}
+}
+
 /*-----------------------------------------------------------------------
  */
 void flash_print_info  (flash_info_t *info)
 {
-    int i, j;
+	int i;
 
-    for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
-    {
-        switch (info->flash_id & FLASH_VENDMASK)
-        {
-        case (INTEL_MANUFACT & FLASH_VENDMASK):
-	        printf("Intel: ");
-	        break;
-        default:
-	        printf("Unknown Vendor ");
-	        break;
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
         }
 
-        switch (info->flash_id & FLASH_TYPEMASK)
-        {
-        case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
-	        printf("28F128J3 (128Mbit)\n");
-	        break;
-        default:
-	        printf("Unknown Chip Type\n");
-	        goto Done;
-	        break;
+	switch (info->flash_id & FLASH_VENDMASK) {
+		case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
+		default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+   case FLASH_28F128J3A:
+				printf ("28F128J3A\n"); break;
+	default:		printf ("Unknown Chip Type\n"); break;
         }
 
-        printf("  Size: %ld MB in %d Sectors\n",
+	printf ("  Size: %ld MB in %d Sectors\n",
 	        info->size >> 20, info->sector_count);
 
-        printf("  Sector Start Addresses:");
-        for (i = 0; i < info->sector_count; i++)
-        {
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
 	        if ((i % 5) == 0)
-	        {
 	        printf ("\n   ");
-	        }
-	        printf (" %08lX%s", info->start[i],
-		        info->protect[i] ? " (RO)" : "     ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
         }
         printf ("\n");
-        info++;
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
+{
+	volatile FPW value;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW)0x00AA00AA;
+	addr[0x2AAA] = (FPW)0x00550055;
+	addr[0x5555] = (FPW)0x00900090;
+
+   mb();
+	value = addr[0];
+
+   switch (value) {
+
+   case (FPW)INTEL_MANUFACT:
+      info->flash_id = FLASH_MAN_INTEL;
+      break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
+		return (0);			/* no or unknown flash	*/
+	}
+
+   mb();
+	value = addr[1];			/* device ID		*/
+
+   switch (value) {
+
+   case (FPW)INTEL_ID_28F128J3A:
+      info->flash_id += FLASH_28F128J3A;
+      info->sector_count = 128;
+      info->size = 0x02000000;
+      break;            /* => 16 MB     */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+			info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
     }
 
-Done:
+	addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
+
+	return (info->size);
 }
 
+
 /*-----------------------------------------------------------------------
  */
 
 int	flash_erase (flash_info_t *info, int s_first, int s_last)
 {
     int flag, prot, sect;
-    int rc = ERR_OK;
-
-    if (info->flash_id == FLASH_UNKNOWN)
-	return ERR_UNKNOWN_FLASH_TYPE;
+	ulong type, start, now, last;
+	int rcode = 0;
 
     if ((s_first < 0) || (s_first > s_last)) {
-	return ERR_INVAL;
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
     }
 
-    if ((info->flash_id & FLASH_VENDMASK) !=
-	(INTEL_MANUFACT & FLASH_VENDMASK)) {
-	return ERR_UNKNOWN_FLASH_VENDOR;
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
     }
 
     prot = 0;
@@ -159,153 +243,79 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	    prot++;
 	}
     }
-    if (prot)
-	return ERR_PROTECTED;
 
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	start = get_timer (0);
+	last  = start;
+
+   /* Disable interrupts which might cause a timeout here */
     flag = disable_interrupts();
 
     /* Start erase on unprotected sectors */
-    for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *)(info->start[sect]);
+			FPW status;
 
 	printf("Erasing sector %2d ... ", sect);
 
 	/* arm simple, non interrupt dependent timer */
 	reset_timer_masked();
 
-	if (info->protect[sect] == 0) {	/* not protected */
-	    vu_short *addr = (vu_short *)(info->start[sect]);
+			*addr = (FPW)0x00500050;	/* clear status register */
+			*addr = (FPW)0x00200020;	/* erase setup */
+			*addr = (FPW)0x00D000D0;	/* erase confirm */
 
-	    *addr = 0x20;	/* erase setup */
-	    *addr = 0xD0;	/* erase confirm */
-
-	    while ((*addr & 0x80) != 0x80) {
+			while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
 		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
-		    *addr = 0xB0; /* suspend erase */
-		    *addr = 0xFF;	/* reset to read mode */
-		    rc = ERR_TIMOUT;
-		    goto outahere;
-		}
-	    }
-
-	    /* clear status register command */
-	    *addr = 0x50;
-	    /* reset to read mode */
-	    *addr = 0xFF;
-	}
-	printf("ok.\n");
-    }
-    if (ctrlc())
-      printf("User Interrupt!\n");
-
-outahere:
-
-    /* allow flash to settle - wait 10 ms */
-    udelay_masked(10000);
-
-    if (flag)
-      enable_interrupts();
-
-    return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t *info, ulong dest, ushort data)
-{
-    vu_short *addr = (vu_short *)dest, val;
-    int rc = ERR_OK;
-    int flag;
-
-    /* Check if Flash is (sufficiently) erased
-     */
-    if ((*addr & data) != data)
-        return ERR_NOT_ERASED;
-
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
-    flag = disable_interrupts();
-
-    /* clear status register command */
-    *addr = 0x50;
-
-    /* program set-up command */
-    *addr = 0x40;
-
-    /* latch address/data */
-    *addr = data;
-
-    /* arm simple, non interrupt dependent timer */
-    reset_timer_masked();
-
-    /* wait while polling the status register */
-    while(((val = *addr) & 0x80) != 0x80)
-    {
-	if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
-	    rc = ERR_TIMOUT;
-	    /* suspend program command */
-	    *addr = 0xB0;
-	    goto outahere;
+					printf ("Timeout\n");
+					*addr = (FPW)0x00B000B0; /* suspend erase	  */
+					*addr = (FPW)0x00FF00FF; /* reset to read mode */
+					rcode = 1;
+					break;
 	}
     }
 
-    if(val & 0x1A) {	/* check for error */
-        printf("\nFlash write error %02x at address %08lx\n",
-    	   (int)val, (unsigned long)dest);
-        if(val & (1<<3)) {
-	    printf("Voltage range error.\n");
-	    rc = ERR_PROG_ERROR;
-	    goto outahere;
-        }
-        if(val & (1<<1)) {
-	    printf("Device protect error.\n");
-	    rc = ERR_PROTECTED;
-	    goto outahere;
-        }
-        if(val & (1<<4)) {
-	    printf("Programming error.\n");
-	    rc = ERR_PROG_ERROR;
-	    goto outahere;
-        }
-        rc = ERR_PROG_ERROR;
-        goto outahere;
-    }
+			*addr = 0x00500050; /* clear status register cmd.   */
+			*addr = 0x00FF00FF; /* resest to read mode          */
 
-outahere:
-    /* read array command */
-    *addr = 0xFF;
-
-    if (flag)
-      enable_interrupts();
-
-    return rc;
+			printf (" done\n");
+        }
+        }
+	return rcode;
 }
 
 /*-----------------------------------------------------------------------
- * Copy memory to flash.
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
  */
 
 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 {
     ulong cp, wp;
-    ushort data;
-    int l;
-    int i, rc;
+	FPW data;
+	int count, i, l, rc, port_width;
 
-    wp = (addr & ~1);	/* get lower word aligned address */
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
 
     /*
      * handle unaligned start bytes
@@ -313,51 +323,110 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
     if ((l = addr - wp) != 0) {
 	data = 0;
 	for (i=0, cp=wp; i<l; ++i, ++cp) {
-	    data = (data >> 8) | (*(uchar *)cp << 8);
+			data = (data << 8) | (*(uchar *)cp);
 	}
-	for (; i<2 && cnt>0; ++i) {
-	    data = (data >> 8) | (*src++ << 8);
+		for (; i<port_width && cnt>0; ++i) {
+			data = (data << 8) | *src++;
 	    --cnt;
 	    ++cp;
 	}
-	for (; cnt==0 && i<2; ++i, ++cp) {
-	    data = (data >> 8) | (*(uchar *)cp << 8);
+		for (; cnt==0 && i<port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
 	}
 
-	if ((rc = write_word(info, wp, data)) != 0) {
+		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
 	    return (rc);
 	}
-	wp += 2;
+		wp += port_width;
     }
 
     /*
      * handle word aligned part
      */
-    while (cnt >= 2) {
-	data = *((vu_short*)src);
-	if ((rc = write_word(info, wp, data)) != 0) {
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i=0; i<port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
 	    return (rc);
 	}
-	src += 2;
-	wp  += 2;
-	cnt -= 2;
+		wp  += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800)
+		{
+         spin_wheel();
+			count = 0;
+		}
     }
 
     if (cnt == 0) {
-	return ERR_OK;
+		return (0);
     }
 
     /*
      * handle unaligned tail bytes
      */
     data = 0;
-    for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
-	data = (data >> 8) | (*src++ << 8);
+	for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
 	--cnt;
     }
-    for (; i<2; ++i, ++cp) {
-	data = (data >> 8) | (*(uchar *)cp << 8);
+	for (; i<port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_data(info, wp, SWAP(data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *)dest;
+	ulong status;
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	*addr = (FPW)0x00400040;		/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
+		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW)0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
     }
 
-    return write_word(info, wp, data);
+	*addr = (FPW)0x00FF00FF;	/* restore read mode */
+
+	return (0);
 }
+
+void inline
+spin_wheel(void)
+{
+   static int r=0,p=0;
+   static char w[] = "\\/-";
+
+   printf("\010%c", w[p]);
+   (++p == 3) ? (p = 0) : 0;
+}
+

board/lubbock/lubbock.c

@@ -47,7 +47,7 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
 
-	return 1;
+	return 0;
 }
 
 int dram_init (void)
@@ -62,6 +62,6 @@ int dram_init (void)
 	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
 	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
 	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-	return PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE + PHYS_SDRAM_3_SIZE +
-			PHYS_SDRAM_4_SIZE;
+
+   return 0;
 }

board/lubbock/memsetup.S

@@ -39,12 +39,16 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
    .endm
 
 
+/*
+ * 	Memory setup
+ */
+
 .globl memsetup
 memsetup:
 
     mov      r10, lr
 
-    /* Set up GPIO pins first */
+	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr		r0,	=GPSR0
 	ldr		r1,	=CFG_GPSR0_VAL
@@ -106,562 +110,284 @@ memsetup:
 	ldr		r1,	=CFG_GAFR2_U_VAL
 	str		r1,   [r0]
 
-   /* enable GPIO pins */
-	ldr		r0,	=PSSR
+	ldr	r0,	=PSSR		/* enable GPIO pins */
 	ldr		r1,	=CFG_PSSR_VAL
 	str		r1,   [r0]
 
-   ldr    r3, =MSC1		    		/* low - bank 2 Lubbock Registers / SRAM */
-   ldr    r2, =CFG_MSC1_VAL			/* high - bank 3 Ethernet Controller */
-   str    r2, [r3]  				/* need to set MSC1 before trying to write to the HEX LEDs */
-   ldr    r2, [r3]  				/* need to read it back to make sure the value latches (see MSC section of manual) */
+	/* ---------------------------------------------------------------- */
+	/* Enable memory interface                                          */
+	/*                                                                  */
+	/* The sequence below is based on the recommended init steps        */
+	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
+	/* Chapter 10.                                                      */
+	/* ---------------------------------------------------------------- */
 
-   ldr    r1, =LED_BLANK
-   mov    r0, #0xFF
-   str    r0, [r1]    		/* turn on hex leds */
+	/* ---------------------------------------------------------------- */
+	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
+	/*         clocks to settle. Only necessary after hard reset...     */
+	/*         FIXME: can be optimized later                            */
+	/* ---------------------------------------------------------------- */
 
-loop:
-   ldr		r0, =0xB0070001
-   ldr    	r1, =_LED
-   str    	r0, [r1]    							/* hex display */
-
-/*********************************************************************
-    Initlialize Memory Controller
-	 The sequence below is based on the recommended init steps detailed
-	 in the EAS, chapter 5 (Chapter 10, Operating Systems Developers Guide)
-
-
-    pause for 200 uSecs- allow internal clocks to settle
-	 *Note: only need this if hard reset... doing it anyway for now
-*/
-
-	@ ---- Wait 200 usec
-	ldr r3, =OSCR       @ reset the OS Timer Count to zero
+	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
 	mov r2, #0
 	str r2, [r3]
-	ldr r4, =0x300			@ really 0x2E1 is about 200usec, so 0x300 should be plenty
+	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
+					/* so 0x300 should be plenty        */
 1:
 	ldr r2, [r3]
 	cmp r4, r2
 	bgt 1b
 
 mem_init:
-        @ get memory controller base address
-        ldr     r1,  =MEMC_BASE
 
-@****************************************************************************
-@  Step 1
-@
+        ldr     r1,  =MEMC_BASE		/* get memory controller base addr. */
 
-        @ write msc0, read back to ensure data latches
-        @
+	/* ---------------------------------------------------------------- */
+	/* Step 2a: Initialize Asynchronous static memory controller        */
+	/* ---------------------------------------------------------------- */
+
+	/* MSC registers: timing, bus width, mem type                       */
+
+        /* MSC0: nCS(0,1)                                                   */
         ldr     r2,   =CFG_MSC0_VAL
         str     r2,   [r1, #MSC0_OFFSET]
-        ldr     r2,   [r1, #MSC0_OFFSET]
-
-        @ write msc1
+        ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
+						/* that data latches        */
+        /* MSC1: nCS(2,3)                                                   */
         ldr     r2,  =CFG_MSC1_VAL
         str     r2,  [r1, #MSC1_OFFSET]
         ldr     r2,  [r1, #MSC1_OFFSET]
 
-        @ write msc2
+	/* MSC2: nCS(4,5)                                                   */
         ldr     r2,  =CFG_MSC2_VAL
         str     r2,  [r1, #MSC2_OFFSET]
         ldr     r2,  [r1, #MSC2_OFFSET]
 
-        @ write mecr
+	/* ---------------------------------------------------------------- */
+	/* Step 2b: Initialize Card Interface                               */
+	/* ---------------------------------------------------------------- */
+
+	/* MECR: Memory Expansion Card Register                             */
         ldr     r2,  =CFG_MECR_VAL
         str     r2,  [r1, #MECR_OFFSET]
+	ldr	r2,	[r1, #MECR_OFFSET]
 
-        @ write mcmem0
+	/* MCMEM0: Card Interface slot 0 timing                             */
         ldr     r2,  =CFG_MCMEM0_VAL
         str     r2,  [r1, #MCMEM0_OFFSET]
+	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
-        @ write mcmem1
+        /* MCMEM1: Card Interface slot 1 timing                             */
         ldr     r2,  =CFG_MCMEM1_VAL
         str     r2,  [r1, #MCMEM1_OFFSET]
+	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
-        @ write mcatt0
+	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
         ldr     r2,  =CFG_MCATT0_VAL
         str     r2,  [r1, #MCATT0_OFFSET]
+	ldr	r2,	[r1, #MCATT0_OFFSET]
 
-        @ write mcatt1
+	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
         ldr     r2,  =CFG_MCATT1_VAL
         str     r2,  [r1, #MCATT1_OFFSET]
+	ldr	r2,	[r1, #MCATT1_OFFSET]
 
-        @ write mcio0
+	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
         ldr     r2,  =CFG_MCIO0_VAL
         str     r2,  [r1, #MCIO0_OFFSET]
+	ldr	r2,	[r1, #MCIO0_OFFSET]
 
-        @ write mcio1
+	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
         ldr     r2,  =CFG_MCIO1_VAL
         str     r2,  [r1, #MCIO1_OFFSET]
+	ldr	r2,	[r1, #MCIO1_OFFSET]
 
-        @-------------------------------------------------------
-        @ 3rd bullet, Step 1
-        @
+	/* ---------------------------------------------------------------- */
+        /* Step 2c: Write FLYCNFG  FIXME: what's that???                    */
+        /* ---------------------------------------------------------------- */
 
-        @ get the mdrefr settings
-        ldr     r3,  =CFG_MDREFR_VAL_100
 
-        @ extract DRI field (we need a valid DRI field)
-        @
-        ldr     r2,  =0xFFF
+	/* ---------------------------------------------------------------- */
+        /* Step 2d: Initialize Timing for Sync Memory (SDCLK0)              */
+        /* ---------------------------------------------------------------- */
 
-        @ valid DRI field in r3
-        @
-        and     r3,  r3,  r2
+	/* Before accessing MDREFR we need a valid DRI field, so we set     */
+	/* this to power on defaults + DRI field.                           */
 
-        @ get the reset state of MDREFR
-        @
+        ldr     r3,     =CFG_MDREFR_VAL
+        ldr     r2,     =0xFFF
+        and     r3,     r3,  r2
+	ldr	r4,	=0x03ca4000
+        orr     r4,     r4,  r3
+	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
         ldr     r4,  [r1, #MDREFR_OFFSET]
 
-        @ clear the DRI field
-        @
-        bic     r4,  r4,  r2
-
-        @ insert the valid DRI field loaded above
-        @
-        orr     r4,  r4,  r3
-
-        @ write back mdrefr
-        @
-        str     r4,  [r1, #MDREFR_OFFSET]
-
-        @ *Note: preserve the mdrefr value in r4 *
-
-@****************************************************************************
-@  Step 2
-@
-        /* This should be for SRAM, why is it commented out??? */
-
-        @ fetch sxcnfg value
-        @
-        @ldr     r2,  =0
-        @ write back sxcnfg
-        @str     r2,  [r1, #SXCNFG_OFFSET]
-
-/*        @if sxcnfg=0, don't program for synch-static memory */
-        @cmp     r2,  #0
-        @beq     1f
-
-        @program sxmrs
-        @ldr     r2,  =SXMRS_SETTINGS
-        @str     r2,  [r1, #SXMRS_OFFSET]
+        /* Note: preserve the mdrefr value in r4                            */
 
 
-@****************************************************************************
-@  Step 3
-@
+	/* ---------------------------------------------------------------- */
+	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
+	/* ---------------------------------------------------------------- */
 
-        @ Assumes previous mdrefr value in r4, if not then read current mdrefr
+	/* Initialize SXCNFG register. Assert the enable bits               */
 
-        @ clear the free-running clock bits
-        @ (clear K0Free, K1Free, K2Free
-        @
-        bic     r4,  r4,  #(0x00800000 | 0x01000000 | 0x02000000)
+	/* Write SXMRS to cause an MRS command to all enabled banks of      */
+	/* synchronous static memory. Note that SXLCR need not be written   */
+	/* at this time.                                                    */
 
-        @ set K1RUN if bank 0 installed
-        @
-        orr   r4,  r4,  #0x00010000
+	/* FIXME: we use async mode for now                                 */
 
 
+        /* ---------------------------------------------------------------- */
+        /* Step 4: Initialize SDRAM                                         */
+        /* ---------------------------------------------------------------- */
 
-#ifdef THIS
-@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
-@<!<!<!<!<!<!<!<!<!<!<!  Begin INSERT 1    <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
-        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-        @ Lubbock: Allow the user to select the {T/R/M} with predetermined
-        @   SDCLK.  Based on Table 3-1 in PXA250 and PXA210 Dev Man.
-        @
-        @  * = Must set MDREFR.K1DB2 to halve the MemClk for desired SDCLK[1]
-        @
-        @   S25, S26 used to provide all 400 MHz BIN values for Cotulla (0,0 - 1,3)
-        @   S25, S26 used to provide all 200 MHz BIN values for Sabinal
-        @
-        @   S23: Force the halving of MemClk when deriving SDCLK[1]
-        @        DOT: no override  !DOT: halve (if not already forced half)
-/*        @        *For certain MemClks, SDCLK's derivation is forced to be halved */
-        @
-        @   S24: Run/Turbo.
-        @        DOT: Run mode   !DOT: Turbo mode
-        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+        /* set MDREFR according to user define with exception of a few bits */
 
-        @
-        @ Allow the user to control K1DB2 where applicable
-        @
-        @ Get the value of S23:          @ 1 = DOT (unity), 0 = !DOT (halve it)
-        @
-        @ DOT:   set K1DB2     (SDCLD = MemClk)
-        @ !DOT:  clear K1DB2   (SDCLK = MemClk/2)
-        @
-        @ldr r2, =FPGA_REGS_BASE_PHYSICAL
-
-        bl GET_S23                          @ r3, r2                    @ get the value of S23 in R0, i put the base adx of fpga in r3
-
-        cmp      r3, #0x0                 @ is !DOT?
-        orreq    r4, r4,  #0x00020000     @ SDClk[1] = MemClk/2
-        bicne    r4, r4,  #0x00020000     @ SDClk[1] = MemClk
-
-        @
-        @ Next, we need to look for S25,S26 selections that necessitate the
-        @  halving of MemClk to derive SDCLK[1]: (S25,S26)={03-0C, 10-13}
-        @ Override above S23-based selection accordingly.
-        @
-        ldr r2, =FPGA_REGS_BASE_PHYSICAL
-        bl  GET_S25                           @ r0, r2
-                                       @ get the value of S25 in R0, i put the base adx of fpga in r2
-
-
-
-        ldr r2, =FPGA_REGS_BASE_PHYSICAL
-        BL  GET_S26                              @ r3, r2
-                                      @ get the value of S26 in R1, i put the base adx of fpga in r2
-
-        orr     r0, r0, r3               @ concatenate S25 & S26 vals
-        and     r0, r0, #0xFF
-
-        @ Set K1DB2 for the frequencies that require it
-        @
-        cmp     r0, #0x03
-        cmpne   r0, #0x04
-        cmpne   r0, #0x05
-        cmpne   r0, #0x06
-        cmpne   r0, #0x07
-        cmpne   r0, #0x08
-        cmpne   r0, #0x09
-        cmpne   r0, #0x0A
-        cmpne   r0, #0x0B
-        cmpne   r0, #0x0C
-        cmpne   r0, #0x10
-        cmpne   r0, #0x11
-        cmpne   r0, #0x12
-        cmpne   r0, #0x13
-        orreq   r4, r4,  #0x00020000     @ SDCLK[1] = (MemClk)/2 for 03 - 0C @ 10 - 13
-
-        @
-        @ *Must make MSC0&1 adjustments now for MEMClks > 100MHz.
-        @
-        @ Adjust MSC0 for MemClks > 100 MHz
-        @
-        ldreq   r0,   [r1, #MSC0_OFFSET]
-        ldreq   r3,   =0x7F007F00
-        biceq   r0,   r0, r3                @ clear MSC0[14:12, 11:8] (RRR, RDN)
-        ldreq   r3,   =0x46004600
-        orreq   r0,   r0, r3                @ set   MSC0[14, 10:9]  (doubling RRR, RDN)
-        streq   r0,   [r1, #MSC0_OFFSET]
-        ldreq   r0,   [r1, #MSC0_OFFSET]    @ read it back to ensure that the data latches
-
-        @
-        @ Adjust MSC1.LH for MemClks > 100 MHz
-        @
-        ldreq   r0,   [r1, #MSC1_OFFSET]
-        ldreq   r3,   =0x7FF0
-        biceq   r0,   r0, r3               @ clear MSC1[14:12, 11:8, 7:4] (RRR, RDN, RDF)
-        ldreq   r3,   =0x4880
-        orreq   r0,   r0, r3               @ set   MSC1[14, 11, 7]  (doubling RRR, RDN, RDF)
-        streq   r0,   [r1, #MSC1_OFFSET]
-        ldreq   r0,   [r1, #MSC1_OFFSET]   @ read it back to ensure that the data latches
-
-        @                                                                   @
-        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-#endif
-
-@<!<!<!<!<!<!<!<!<!<!<!    End INSERT 1    <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
-@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
-
-
-        @ write back mdrefr
-        @
-        str     r4,  [r1, #MDREFR_OFFSET]
+        ldr     r4,     =CFG_MDREFR_VAL
+	orr	r4,	r4,	#(MDREFR_SLFRSH)
+	bic	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
+	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
         ldr     r4,  [r1, #MDREFR_OFFSET]
 
-        @ deassert SLFRSH
-        @
-        bic     r4,  r4,  #0x00400000
+	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
 
-        @ write back mdrefr
-        @
-        str     r4,  [r1, #MDREFR_OFFSET]
-
-        @ assert E1PIN
-        @
-        orr     r4,  r4,  #0x00008000
-
-        @ write back mdrefr
-        @
-        str     r4,  [r1, #MDREFR_OFFSET]
+	bic	r4,	r4,	#(MDREFR_SLFRSH)
+        str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
         ldr     r4,  [r1, #MDREFR_OFFSET]
-        nop
-        nop
 
 
-@****************************************************************************
-@  Step 4
-@
+	/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired                */
 
-        @ fetch platform value of mdcnfg
-        @
-        ldr     r2,  =CFG_MDCNFG_VAL
-
-        @ disable all sdram banks
-        @
-        bic     r2,  r2,  #(MDCNFG_DE0 | MDCNFG_DE1)
-        bic     r2,  r2,  #(MDCNFG_DE2 | MDCNFG_DE3)
-
-        @ program banks 0/1 for bus width
-        @
-        bic   r2,  r2,  #MDCNFG_DWID0      @0=32-bit
+        ldr     r4,     =CFG_MDREFR_VAL
+        str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+        ldr     r4,     [r1, #MDREFR_OFFSET]
 
 
-        @ write initial value of mdcnfg, w/o enabling sdram banks
-        @
-        str     r2,  [r1, #MDCNFG_OFFSET]
+	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
+	/*          configure but not enable each SDRAM partition pair.     */
 
-@ ****************************************************************************
-@  Step 5
-@
+	ldr	r4,	=CFG_MDCNFG_VAL
+	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 
-        @ pause for 200 uSecs
-        @
-    	ldr r3, =OSCR   @reset the OS Timer Count to zero
+        str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
+        ldr     r4,     [r1, #MDCNFG_OFFSET]
+
+
+	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,          */
+	/*          100..200 <20>sec.                                          */
+
+	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
     	mov r2, #0
 	    str r2, [r3]
-	    ldr r4, =0x300			@really 0x2E1 is about 200usec, so 0x300 should be plenty
+	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
+					/* so 0x300 should be plenty        */
 1:
 	    ldr r2, [r3]
 	    cmp r4, r2
 	    bgt 1b
 
 
-@****************************************************************************
-@  Step 6
-@
+	/* Step 4f: Trigger a number (usually 8) refresh cycles by          */
+	/*          attempting non-burst read or write accesses to disabled */
+	/*          SDRAM, as commonly specified in the power up sequence   */
+	/*          documented in SDRAM data sheets. The address(es) used   */
+	/*          for this purpose must not be cacheable.                 */
 
-	    mov    r0, #0x78				    @turn everything off
-      mcr    p15, 0, r0, c1, c0, 0		@(caches off, MMU off, etc.)
+	ldr	r3,	=CFG_DRAM_BASE
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
 
 
-@ ****************************************************************************
-@  Step 7
-@
-        @ Access memory *not yet enabled* for CBR refresh cycles (8)
-        @ - CBR is generated for all banks
+	/* Step 4g: Write MDCNFG with enable bits asserted                  */
+	/*          (MDCNFG:DEx set to 1).                                  */
 
-	    ldr     r2, =CFG_DRAM_BASE
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-
-
-@ ****************************************************************************
-@  Step 8: NOP (enable dcache if you wanna... we dont)
-@
-
-
-@ ****************************************************************************
-@  Step 9
-@
-
-
-        @get memory controller base address
-        @
-        ldr     r1,  =MEMC_BASE
-
-        @fetch current mdcnfg value
-        @
         ldr     r3,  [r1, #MDCNFG_OFFSET]
-
-        @enable sdram bank 0 if installed (must do for any populated bank)
-        @
-        orr     r3,  r3,  #MDCNFG_DE0
-
-        @write back mdcnfg, enabling the sdram bank(s)
-        @
+	orr	r3,	r3,	#(MDCNFG_DE0|MDCNFG_DE1)
         str     r3,  [r1, #MDCNFG_OFFSET]
 
+	/* Step 4h: Write MDMRS.                                            */
 
-@****************************************************************************
-@  Step 10
-@
-
-        @ write mdmrs
-        @
         ldr     r2,  =CFG_MDMRS_VAL
         str     r2,  [r1, #MDMRS_OFFSET]
 
 
-@****************************************************************************
-@  Step 11: Final Step
-@
+	/* We are finished with Intel's memory controller initialisation    */
 
-@INITINTC
-        @********************************************************************
-        @ Disable (mask) all interrupts at the interrupt controller
-        @
 
-        @ clear the interrupt level register (use IRQ, not FIQ)
-        @
-        mov     r1, #0
+	/* ---------------------------------------------------------------- */
+	/* Disable (mask) all interrupts at interrupt controller            */
+	/* ---------------------------------------------------------------- */
+
+initirqs:
+
+        mov     r1, #0		/* clear int. level register (IRQ, not FIQ) */
         ldr     r2,  =ICLR
         str     r1,  [r2]
 
-        @ mask all interrupts at the controller
-        @
-        ldr     r2,  =ICMR
+        ldr     r2,  =ICMR	/* mask all interrupts at the controller    */
         str     r1,  [r2]
 
 
-@INITCLKS
-        @ ********************************************************************
-        @ Disable the peripheral clocks, and set the core clock
-        @ frequency (hard-coding at 398.12MHz for now).
-        @
+        /* ---------------------------------------------------------------- */
+	/* Clock initialisation                                             */
+        /* ---------------------------------------------------------------- */
 
-		@ Turn Off ALL on-chip peripheral clocks for re-configuration
-		@ *Note: See label 'ENABLECLKS' for the re-enabling
-		@
+initclks:
+
+	/* Disable the peripheral clocks, and set the core clock frequency  */
+	/* (hard-coding at 398.12MHz for now).                              */
+
+	/* Turn Off ALL on-chip peripheral clocks for re-configuration      */
+	/* Note: See label 'ENABLECLKS' for the re-enabling                 */
         ldr     r1,  =CKEN
         mov     r2,  #0
         str     r2,  [r1]
 
 
-        @ default value in case no valid rotary switch setting is found
-        ldr     r2, =(CCCR_L27 | CCCR_M2 | CCCR_N10)        @ DEFAULT: {200/200/100}
+        /* default value in case no valid rotary switch setting is found    */
+        ldr     r2, =(CCCR_L27|CCCR_M2|CCCR_N10)  /* DEFAULT: {200/200/100} */
 
-
-        @... and write the core clock config register
-        @
+        /* ... and write the core clock config register                     */
         ldr     r1,  =CCCR
         str     r2,  [r1]
 
-/*        @ enable the 32Khz oscillator for RTC and PowerManager
-        @
+#ifdef RTC
+	/* enable the 32Khz oscillator for RTC and PowerManager             */
+
         ldr     r1,  =OSCC
         mov     r2,  #OSCC_OON
         str     r2,  [r1]
 
-
-        @ NOTE:  spin here until OSCC.OOK get set,
-        @        meaning the PLL has settled.
-        @
+	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL         */
+	/* has settled.                                                     */
 60:
         ldr     r2, [r1]
         ands    r2, r2, #1
         beq     60b
-*/
-
-@OSCC_OON_DONE
-
-
-#ifdef  A0_COTULLA
-    @****************************************************************************
-    @ !!! Take care of A0 Errata Sighting #4 --
-    @ after a frequency change, the memory controller must be restarted
-    @
-
-        @ get memory controller base address
-        ldr     r1,  =MEMC_BASE
-
-        @ get the current state of MDREFR
-        @
-        ldr     r2,  [r1, #MDREFR_OFFSET]
-
-        @ clear E0PIN, E1PIN
-        @
-        bic     r3,  r2,  #(MDREFR_E0PIN | MDREFR_E1PIN)
-
-        @ write MDREFR with E0PIN, E1PIN cleared (disable sdclk[0,1])
-        @
-        str     r3,  [r1, #MDREFR_OFFSET]
-
-        @ then write MDREFR with E0PIN, E1PIN set (enable sdclk[0,1])
-        @
-        str     r2,  [r1, #MDREFR_OFFSET]
-
-        @ get the current state of MDCNFG
-        @
-        ldr     r3,  [r1, #MDCNFG_OFFSET]
-
-        @ disable all SDRAM banks
-        @
-        bic     r3,  r3,  #(MDCNFG_DE0 | MDCNFG_DE1)
-        bic     r3,  r3,  #(MDCNFG_DE2 |  MDCNFG_DE3)
-
-        @ write back MDCNFG
-        @
-        ldr     r3,  [r1, #MDCNFG_OFFSET]
-
-	    @ Access memory not yet enabled for CBR refresh cycles (8)
-        @ - CBR is generated for *all* banks
-	    ldr     r2, =CFG_DRAM_BASE
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-	    str     r2, [r2]
-
-        @ fetch current mdcnfg value
-        @
-        ldr     r3,  [r1, #MDCNFG_OFFSET]
-
-        @ enable sdram bank 0 if installed
-        @
-        orr     r3,  r3,  #MDCNFG_DE0
-
-        @ write back mdcnfg, enabling the sdram bank(s)
-        @
-        str     r3,  [r1, #MDCNFG_OFFSET]
-
-        @ write mdmrs
-        @
-        ldr     r2,  =CFG_MDMRS_VAL
-        str     r2,  [r1, #MDMRS_OFFSET]
-
-
-
-    /*    @ errata: don't enable auto power-down */
-        @ get current value of mdrefr
-        @ldr     r3,  [r1, #MDREFR_OFFSET]
-        @ enable auto-power down
-        @orr     r3,  r3,  #MDREFR_APD
-        @write back mdrefr
-        @str     r3,  [r1, #MDREFR_OFFSET]
-
-#endif A0_Cotulla
-
-
-  ldr     r0, =0x000C0dE3
-  ldr    	r1, =_LED
-  str    	r0, [r1]    		/* hex display */
-
-@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
-@ ^%^%^%^%^%^%^%^%^%   above could be replaced by prememLLI ^%^%^%^%^%^%^%^%^%
-@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+#endif
 
+	/* ---------------------------------------------------------------- */
+	/*                                                                  */
+        /* ---------------------------------------------------------------- */
 
 	/* Save SDRAM size */
     ldr     r1, =DRAM_SIZE
 	 str	   r8, [r1]
 
-    ldr     r0, =0xC0DE0006
-    ldr    	r1, =_LED
-    str    	r0, [r1]    		/* hex display */
-
-	/* Interrupt init */
-	/* Mask all interrupts */
+	/* Interrupt init: Mask all interrupts                              */
     ldr	r0, =ICMR /* enable no sources */
 	mov r1, #0
     str r1, [r0]
 
+	/* FIXME */
+
 #define NODEBUG
 #ifdef NODEBUG
 	/*Disable software and data breakpoints */
@@ -676,74 +402,11 @@ mem_init:
 
 #endif
 
-	ldr     r0, =0xBEEF001D
-    ldr    	r1, =_LED
-    str    	r0, [r1]    		/* hex display */
+        /* ---------------------------------------------------------------- */
+	/* End memsetup                                                     */
+        /* ---------------------------------------------------------------- */
 
-	mov	pc, r10
-
-@ End memsetup
-
-@ %%%%%%%%%%%   Useful subroutines
-GET_S23:
-    @ This macro will read S23 and return its value in r3
-    @ r2 contains the base address of the Lubbock user registers
-    ldr r2, =FPGA_REGS_BASE_PHYSICAL
-
-    /*@ read S23's value */
-    ldr     r3, [r2, #USER_SWITCHES_OFFSET]
-
-    @ mask out irrelevant bits
-    and     r3, r3, #0x200
-
-    @ get bit into position 0
-    mov     r3, r3, LSR #9
+endmemsetup:
 
     mov     pc, lr
-@ End GET_S23
-
-
-GET_S24:
-    @ This macro will read S24 and return its value in r0
-    @ r2 contains the base address of the Lubbock user registers
-    ldr r2, =FPGA_REGS_BASE_PHYSICAL
-
-    /*@ read S24's value */
-    ldr     r0, [r2, #USER_SWITCHES_OFFSET]
-
-    @ mask out irrelevant bits
-    and     r0, r0, #0x100
-
-    @ get bit into position 0
-    mov     r0, r0, LSR #8
-
-    mov     pc, lr
-@ End GET_S23
-
-
-GET_S25:
-    @ This macro will read rotary S25 and return its value in r0
-    @ r2 contains the base address of the Lubbock user registers
-    @ read the user switches register
-    ldr     r0, [r2, #USER_SWITCHES_OFFSET]
-
-    @ mask out irrelevant bits
-    and     r0, r0, #0xF0
-
-    mov     pc, lr
-@ End subroutine
-
-
-GET_S26:
-    @ This macro will read rotary S26 and return its value in r3
-    @ r2 contains the base address of the Lubbock user registers
-    @ read the user switches register
-    ldr     r3, [r2, #USER_SWITCHES_OFFSET]
-
-    @ mask out irrelevant bits
-    and     r3, r3, #0x0F
-
-    mov     pc, lr
-@ End subroutine GET_S26
-
 

board/mpc8260ads/mpc8260ads.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * Modified during 2001 by
@@ -31,6 +31,8 @@
 #include <common.h>
 #include <ioports.h>
 #include <mpc8260.h>
+#include <i2c.h>
+#include <spd.h>
 
 /*
  * I/O Port configuration table
@@ -167,8 +169,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
 	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
 	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   0,   0,   1,   0,   0   }, /* LED */
+       /* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+       /* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
 	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
 	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
 	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
@@ -197,76 +199,222 @@ typedef struct bscr_ {
 	unsigned long bcsr7;
 } bcsr_t;
 
-void reset_phy(void)
+void reset_phy (void)
 {
-    volatile bcsr_t  *bcsr           = (bcsr_t *)CFG_BCSR;
+	volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
 
-    /* reset the FEC port */
-    bcsr->bcsr1                    &= ~FETH_RST;
-    bcsr->bcsr1                    |= FETH_RST;
+	/* reset the FEC port */
+	bcsr->bcsr1 &= ~FETH_RST;
+	bcsr->bcsr1 |=  FETH_RST;
 }
 
 
 int board_pre_init (void)
 {
-    volatile bcsr_t  *bcsr         = (bcsr_t *)CFG_BCSR;
-    bcsr->bcsr1                    = ~FETHIEN & ~RS232EN_1;
+	volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
 
-    return 0;
+	bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1;
+
+	return 0;
 }
 
-long int initdram(int board_type)
+#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
+
+long int initdram (int board_type)
 {
-    volatile immap_t *immap         = (immap_t *)CFG_IMMR;
-    volatile memctl8260_t *memctl   = &immap->im_memctl;
-    volatile uchar        *ramaddr,
-                                  c = 0xff;
-    int i;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+	volatile uchar *ramaddr, c = 0xff;
+
+	/* Initialisation is for 16MB DIMM the board is shipped with */
+	long int msize = 16;
+	uint or    = 0xFF000CA0;
+	uint psdmr = CFG_PSDMR;
+	uint psrt  = CFG_PSRT;
+
+	int i;
 
 #ifndef CFG_RAMBOOT
-    immap->im_siu_conf.sc_ppc_acr   = 0x00000002;
-    immap->im_siu_conf.sc_ppc_alrh  = 0x01267893;
-    immap->im_siu_conf.sc_tescr1    = 0x00004000;
+	immap->im_siu_conf.sc_ppc_acr  = 0x00000002;
+	immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
+	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 
-    /* init local sdram, bank 4 */
-    memctl->memc_lsrt               = 0x00000010;
-    memctl->memc_or4                = 0xFFC01480;
-    memctl->memc_br4                = 0x04001861;
-    memctl->memc_lsdmr              = 0x2886A522;
-    ramaddr                         = (uchar *)CFG_LSDRAM_BASE;
-    *ramaddr                        = c;
-    memctl->memc_lsdmr              = 0x0886A522;
-    for( i = 0; i < 8; i++ ) {
-        *ramaddr                    = c;
-    }
-    memctl->memc_lsdmr              = 0x1886A522;
-    *ramaddr                        = c;
-    memctl->memc_lsdmr              = 0x4086A522;
+	memctl->memc_mptpr = CFG_MPTPR;
+	/* init local sdram, bank 4 */
+	memctl->memc_lsrt  = 0x00000010;
+	memctl->memc_or4   = 0xFFC01480;
+	memctl->memc_br4   = 0x04001861;
+	memctl->memc_lsdmr = 0x2886A522;
+	ramaddr = (uchar *) CFG_LSDRAM_BASE;
+	*ramaddr = c;
+	memctl->memc_lsdmr = 0x0886A522;
+	for (i = 0; i < 8; i++) {
+		*ramaddr = c;
+	}
+	memctl->memc_lsdmr = 0x1886A522;
+	*ramaddr = c;
+	memctl->memc_lsdmr = 0x4086A522;
 
-    /* init sdram dimm */
-    ramaddr                         = (uchar *)CFG_SDRAM_BASE;
-    memctl->memc_psrt               = 0x00000010;
-    immap->im_memctl.memc_or2       = 0xFF000CA0;
-    immap->im_memctl.memc_br2       = 0x00000041;
-    memctl->memc_psdmr              = 0x296EB452;
-    *ramaddr                        = c;
-    memctl->memc_psdmr              = 0x096EB452;
-    for (i = 0; i < 8; i++)
-        *ramaddr                    = c;
+	/* init sdram dimm */
+#ifdef CONFIG_SPD_EEPROM
+	{
+		spd_eeprom_t spd;
+		uint pbi, bsel, rowst, lsb, tmp;
 
-    memctl->memc_psdmr              = 0x196EB452;
-    *ramaddr                        = c;
-    memctl->memc_psdmr              = 0x416EB452;
-    *ramaddr                        = c;
+		i2c_read (CONFIG_SPD_ADDR, 0, 1, (uchar *) & spd, sizeof (spd));
+
+		/* Bank-based interleaving is not supported for physical bank
+		   sizes greater than 128MB which is encoded as 0x20 in SPD
+		 */
+		pbi = (spd.row_dens > 32) ? 1 : CONFIG_SDRAM_PBI;
+		msize = spd.nrows * (4 * spd.row_dens);	/* Mixed size not supported */
+		or = ~(msize - 1) << 20;	/* SDAM */
+		switch (spd.nbanks) {	/* BPD */
+		case 2:
+			bsel = 1;
+			break;
+		case 4:
+			bsel = 2;
+			or |= 0x00002000;
+			break;
+		case 8:
+			bsel = 3;
+			or |= 0x00004000;
+			break;
+		}
+		lsb = 3;	/* For 64-bit port, lsb is 3 bits */
+
+		if (pbi) {	/* Bus partition depends on interleaving */
+			rowst = 32 - (spd.nrow_addr + spd.ncol_addr + bsel + lsb);
+			or |= (rowst << 9);	/* ROWST */
+		} else {
+			rowst = 32 - (spd.nrow_addr + spd.ncol_addr + lsb);
+			or |= ((rowst * 2 - 12) << 9);	/* ROWST */
+		}
+		or |= ((spd.nrow_addr - 9) << 6);	/* NUMR */
+
+		psdmr = (pbi << 31);	/* PBI */
+		/* Bus multiplexing parameters */
+		tmp = 32 - (lsb + spd.nrow_addr);	/* Tables 10-19 and 10-20 */
+		psdmr |= ((tmp - (rowst - 5) - 13) << 24);	/* SDAM */
+		psdmr |= ((tmp - 3 - 12) << 21);	/* BSMA */
+
+		tmp = (31 - lsb - 10) - tmp;
+		/* Pin connected to SDA10 is (31 - lsb - 10).
+		   rowst is multiplexed over (32 - (lsb + spd.nrow_addr)),
+		   so (rowst + tmp) alternates with AP.
+		 */
+		if (pbi)				/* Table 10-7 */
+			psdmr |= ((10 - (rowst + tmp)) << 18);	/* SDA10 */
+		else
+			psdmr |= ((12 - (rowst + tmp)) << 18);	/* SDA10 */
+
+		/* SDRAM device-specific parameters */
+		tmp = ns2clk (70);	/* Refresh recovery is not in SPD, so assume 70ns */
+		switch (tmp) {		/* RFRC */
+		case 1:
+		case 2:
+			psdmr |= (1 << 15);
+			break;
+		case 3:
+		case 4:
+		case 5:
+		case 6:
+		case 7:
+		case 8:
+			psdmr |= ((tmp - 2) << 15);
+			break;
+		default:
+			psdmr |= (7 << 15);
+		}
+		psdmr |= (ns2clk (spd.trp) % 8 << 12);	/* PRETOACT */
+		psdmr |= (ns2clk (spd.trcd) % 8 << 9);	/* ACTTORW */
+		/* BL=0 because for 64-bit SDRAM burst length must be 4 */
+		/* LDOTOPRE ??? */
+		for (i = 0, tmp = spd.write_lat; (i < 4) && ((tmp & 1) == 0); i++)
+			tmp >>= 1;
+		switch (i) {			/* WRC */
+		case 0:
+		case 1:
+			psdmr |= (1 << 4);
+			break;
+		case 2:
+		case 3:
+			psdmr |= (i << 4);
+			break;
+		}
+		/* EAMUX=0 - no external address multiplexing */
+		/* BUFCMD=0 - no external buffers */
+		for (i = 1, tmp = spd.cas_lat; (i < 3) && ((tmp & 1) == 0); i++)
+			tmp >>= 1;
+		psdmr |= i;				/* CL */
+
+		switch (spd.refresh & 0x7F) {
+		case 1:
+			tmp = 3900;
+			break;
+		case 2:
+			tmp = 7800;
+			break;
+		case 3:
+			tmp = 31300;
+			break;
+		case 4:
+			tmp = 62500;
+			break;
+		case 5:
+			tmp = 125000;
+			break;
+		default:
+			tmp = 15625;
+		}
+		psrt = tmp / (1000000000 / CONFIG_8260_CLKIN *
+				  ((memctl->memc_mptpr >> 8) + 1)) - 1;
+#ifdef SPD_DEBUG
+		printf ("\nDIMM type:       %-18.18s\n", spd.mpart);
+		printf ("SPD size:        %d\n", spd.info_size);
+		printf ("EEPROM size:     %d\n", 1 << spd.chip_size);
+		printf ("Memory type:     %d\n", spd.mem_type);
+		printf ("Row addr:        %d\n", spd.nrow_addr);
+		printf ("Column addr:     %d\n", spd.ncol_addr);
+		printf ("# of rows:       %d\n", spd.nrows);
+		printf ("Row density:     %d\n", spd.row_dens);
+		printf ("# of banks:      %d\n", spd.nbanks);
+		printf ("Data width:      %d\n",
+				256 * spd.dataw_msb + spd.dataw_lsb);
+		printf ("Chip width:      %d\n", spd.primw);
+		printf ("Refresh rate:    %02X\n", spd.refresh);
+		printf ("CAS latencies:   %02X\n", spd.cas_lat);
+		printf ("Write latencies: %02X\n", spd.write_lat);
+		printf ("tRP:             %d\n", spd.trp);
+		printf ("tRCD:            %d\n", spd.trcd);
+
+		printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
+#endif /* SPD_DEBUG */
+	}
+#endif /* CONFIG_SPD_EEPROM */
+	memctl->memc_psrt = psrt;
+	memctl->memc_or2 = or;
+	memctl->memc_br2 = CFG_SDRAM_BASE | 0x00000041;
+	ramaddr = (uchar *) CFG_SDRAM_BASE;
+	memctl->memc_psdmr = psdmr | 0x28000000;	/* Precharge all banks */
+	*ramaddr = c;
+	memctl->memc_psdmr = psdmr | 0x08000000;	/* CBR refresh */
+	for (i = 0; i < 8; i++)
+		*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | 0x18000000;	/* Mode Register write */
+	*ramaddr = c;
+	memctl->memc_psdmr = psdmr | 0x40000000;	/* Refresh enable */
+	*ramaddr = c;
 #endif
 
-    /* return total ram size of simm */
-    return (16 * 1024 * 1024);
+	/* return total ram size of DIMM */
+	return (msize * 1024 * 1024);
 }
 
-int checkboard(void)
+int checkboard (void)
 {
-    puts ("Board: Motorola MPC8260ADS\n");
-    return 0;
+	puts ("Board: Motorola MPC8260ADS\n");
+	return 0;
 }
-

board/mpc8266ads/Makefile

@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/mpc8266ads/config.mk

@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Modified by, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8260ads board
+#
+
+TEXT_BASE = 0xfff00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board

board/mpc8266ads/flash.c

@@ -0,0 +1,509 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+#ifndef CONFIG_MPC8260ADS
+	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t	*memctl = &immap->im_memctl;
+	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
+#endif
+	unsigned long size;
+	int i;
+
+	/* Init: enable write,
+	 * or we cannot even write flash commands
+	 */
+#ifndef CONFIG_MPC8260ADS
+	bcsr->bd_ctrl |= BD_CTRL_FLWE;
+#endif
+
+
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+
+		/* set the default sector offset */
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size<<20);
+	}
+
+#ifndef CONFIG_MPC8260ADS
+	/* Remap FLASH according to real size */
+	memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+				(memctl->memc_br1 & ~(BR_BA_MSK));
+#endif
+	/* Re-do sizing to get full correct info */
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	flash_info[0].size = size;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      &flash_info[0]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      &flash_info[0]);
+#endif
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
+	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+				break;
+	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+				break;
+	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+				break;
+	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+	ulong sector_offset;
+
+	/* Write "Intelligent Identifier" command: read Manufacturer ID */
+	*addr = 0x90909090;
+
+	value = addr[0] & 0x00FF00FF;
+	switch (value) {
+	case MT_MANUFACT:	/* SHARP, MT or => Intel */
+	case INTEL_ALT_MANU:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		printf("unknown manufacturer: %x\n", (unsigned int)value);
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[1];			/* device ID		*/
+
+	switch (value) {
+	case (INTEL_ID_28F016S):
+		info->flash_id += FLASH_28F016SV;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F160S3):
+		info->flash_id += FLASH_28F160S3;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F320S3):
+		info->flash_id += FLASH_28F320S3;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		sector_offset = 0x20000;
+		break;				/* => 2x4 MB		*/
+
+	case SHARP_ID_28F016SCL:
+	case SHARP_ID_28F016SCZ:
+		info->flash_id      = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+		info->sector_count  = 32;
+		info->size          = 0x00800000;
+		sector_offset = 0x40000;
+		break;				/* => 4x2 MB		*/
+
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++) {
+		info->start[i] = base;
+		base += sector_offset;
+		/* don't know how to check sector protection */
+		info->protect[i] = 0;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (vu_long *)info->start[0];
+
+		*addr = 0xFFFFFF;	/* reset bank to read array mode */
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	/* Make Sure Block Lock Bit is not set. */
+	if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+		return 1;
+	}
+
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_long *addr = (vu_long *)(info->start[sect]);
+
+			last = start = get_timer (0);
+
+			/* Disable interrupts which might cause a timeout here */
+			flag = disable_interrupts();
+
+			/* Reset Array */
+			*addr = 0xffffffff;
+			/* Clear Status Register */
+			*addr = 0x50505050;
+			/* Single Block Erase Command */
+			*addr = 0x20202020;
+			/* Confirm */
+			*addr = 0xD0D0D0D0;
+
+			if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+			    /* Resume Command, as per errata update */
+			    *addr = 0xD0D0D0D0;
+			}
+
+			/* re-enable interrupts if necessary */
+			if (flag)
+				enable_interrupts();
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+			while ((*addr & 0x80808080) != 0x80808080) {
+				if(*addr & 0x20202020){
+					printf("Error in Block Erase - Lock Bit may be set!\n");
+					printf("Status Register = 0x%X\n", (uint)*addr);
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					return 1;
+				}
+				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					return 1;
+				}
+				/* show that we're waiting */
+				if ((now - last) > 1000) {	/* every second */
+					putc ('.');
+					last = now;
+				}
+			}
+
+			/* reset to read mode */
+			*addr = 0xFFFFFFFF;
+		}
+	}
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)dest;
+	ulong start, csr;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Write Command */
+	*addr = 0x10101010;
+
+	/* Write Data */
+	*addr = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	flag  = 0;
+	while (((csr = *addr) & 0x80808080) != 0x80808080) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			flag = 1;
+			break;
+		}
+	}
+	if (csr & 0x40404040) {
+		printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+		flag = 1;
+	}
+
+	/* Clear Status Registers Command */
+	*addr = 0x50505050;
+	/* Reset to read array mode */
+	*addr = 0xFFFFFFFF;
+
+	return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long  * addr)
+{
+	ulong start, now;
+
+	/* Reset Array */
+	*addr = 0xffffffff;
+	/* Clear Status Register */
+	*addr = 0x50505050;
+
+	*addr = 0x60606060;
+	*addr = 0xd0d0d0d0;
+
+	start = get_timer (0);
+	while(*addr != 0x80808080){
+		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout on clearing Block Lock Bit\n");
+			*addr = 0xFFFFFFFF;	/* reset bank */
+			return 1;
+		}
+	}
+	return 0;
+}

board/mpc8266ads/mpc8266ads.c

@@ -0,0 +1,565 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified during 2001 by
+ * Advanced Communications Technologies (Australia) Pty. Ltd.
+ * Howard Walker, Tuong Vu-Dinh
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Added support for the 16M dram simm on the 8260ads boards
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <i2c.h>
+#include <mpc8260.h>
+
+/*
+ * PBI Page Based Interleaving
+ *   PSDMR_PBI page based interleaving
+ *   0         bank based interleaving
+ * External Address Multiplexing (EAMUX) adds a clock to address cycles
+ *   (this can help with marginal board layouts)
+ *   PSDMR_EAMUX  adds a clock
+ *   0            no extra clock
+ * Buffer Command (BUFCMD) adds a clock to command cycles.
+ *   PSDMR_BUFCMD adds a clock
+ *   0            no extra clock
+ */
+#define CONFIG_PBI		0
+#define PESSIMISTIC_SDRAM	0
+#define EAMUX			0	/* EST requires EAMUX */
+#define BUFCMD			0
+
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+        /* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
+	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
+	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
+	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
+	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
+	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
+	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
+	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
+	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
+	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
+	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
+	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
+	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
+	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
+	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
+	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
+	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
+	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
+	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
+	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
+	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
+	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
+	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
+	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
+	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
+	/* PA6  */ {   1,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
+	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
+	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
+	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
+	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
+	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
+	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
+    },
+
+    /* Port B configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
+	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
+	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
+	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
+	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
+	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
+	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+    /* Port C */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
+	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
+	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
+	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
+	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
+	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
+	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
+	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
+	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
+	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
+	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
+	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
+	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
+	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
+	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
+	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
+	/* PC15 */ {   0,   0,   0,   1,   0,   0   }, /* PC15 */
+	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
+	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
+	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
+	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
+	/* PC10 */ {   1,   1,   0,   0,   0,   0   }, /* LXT970 FETHMDC */
+	/* PC9  */ {   1,   1,   0,   0,   0,   0   }, /* LXT970 FETHMDIO */
+	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
+	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
+	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
+	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
+	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
+	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
+	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
+	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
+	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
+    },
+
+    /* Port D */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
+	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
+	/* PD29 */ {   0,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
+	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
+	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
+	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
+	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
+	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
+	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
+	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
+	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
+	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
+	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
+	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
+	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
+	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
+	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
+	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
+	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
+	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
+	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
+	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
+	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
+	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
+	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+typedef struct bscr_ {
+	unsigned long bcsr0;
+	unsigned long bcsr1;
+	unsigned long bcsr2;
+	unsigned long bcsr3;
+	unsigned long bcsr4;
+	unsigned long bcsr5;
+	unsigned long bcsr6;
+	unsigned long bcsr7;
+} bcsr_t;
+
+void reset_phy(void)
+{
+    volatile bcsr_t  *bcsr           = (bcsr_t *)CFG_BCSR;
+
+    /* reset the FEC port */
+    bcsr->bcsr1                    &= ~FETH_RST;
+    bcsr->bcsr1                    |= FETH_RST;
+}
+
+
+int board_pre_init (void)
+{
+    volatile bcsr_t  *bcsr         = (bcsr_t *)CFG_BCSR;
+    bcsr->bcsr1                    = ~FETHIEN & ~RS232EN_1;
+
+    return 0;
+}
+
+int checkboard(void)
+{
+    puts ("Board: Motorola MPC8266ADS\n");
+    return 0;
+}
+
+long int initdram(int board_type)
+{
+	/* Autoinit part stolen from board/sacsng/sacsng.c */
+    volatile immap_t *immap         = (immap_t *)CFG_IMMR;
+    volatile memctl8260_t *memctl   = &immap->im_memctl;
+    volatile uchar c = 0xff;
+    volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
+    uint  psdmr = CFG_PSDMR;
+    int i;
+
+    uint   psrt = 14;					/* for no SPD */
+    uint   chipselects = 1;				/* for no SPD */
+    uint   sdram_size = CFG_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
+    uint   or = CFG_OR2_PRELIM;				/* for no SPD */
+    uint   data_width;
+    uint   rows;
+    uint   banks;
+    uint   cols;
+    uint   caslatency;
+    uint   width;
+    uint   rowst;
+    uint   sdam;
+    uint   bsma;
+    uint   sda10;
+    u_char spd_size;
+    u_char data;
+    u_char cksum;
+    int    j;
+
+    /* Keep the compiler from complaining about potentially uninitialized vars */
+    data_width = chipselects = rows = banks = cols = caslatency = psrt = 0;
+
+    /*
+     * Read the SDRAM SPD EEPROM via I2C.
+     */
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+    i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
+    spd_size = data;
+    cksum    = data;
+    for(j = 1; j < 64; j++) 
+	{	/* read only the checksummed bytes */
+	/* note: the I2C address autoincrements when alen == 0 */
+		i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
+		/*printf("addr %d = 0x%02x\n", j, data);*/
+		if(j ==  5) chipselects = data & 0x0F;
+		else if(j ==  6) data_width  = data;
+		else if(j ==  7) data_width |= data << 8;
+		else if(j ==  3) rows        = data & 0x0F;
+		else if(j ==  4) cols        = data & 0x0F;
+		else if(j == 12) 
+		{
+			/*
+				 * Refresh rate: this assumes the prescaler is set to
+			 * approximately 1uSec per tick.
+			 */
+			switch(data & 0x7F) 
+			{
+					default:
+					case 0:  psrt =  16; /*  15.625uS */  break;
+					case 1:  psrt =   2;  /*   3.9uS   */  break;
+					case 2:  psrt =   6;  /*   7.8uS   */  break;
+					case 3:  psrt =  29;  /*  31.3uS   */  break;
+					case 4:  psrt =  60;  /*  62.5uS   */  break;
+					case 5:  psrt = 120;  /* 125uS     */  break;
+			}
+		}
+		else if(j == 17) banks       = data;
+		else if(j == 18) 
+		{
+			caslatency = 3; /* default CL */
+#		    if(PESSIMISTIC_SDRAM)
+				if((data & 0x04) != 0) caslatency = 3;
+				else if((data & 0x02) != 0) caslatency = 2;
+				else if((data & 0x01) != 0) caslatency = 1;
+#			else
+				if((data & 0x01) != 0) caslatency = 1;
+				else if((data & 0x02) != 0) caslatency = 2;
+				else if((data & 0x04) != 0) caslatency = 3;
+#			endif
+			else 
+			{
+			printf ("WARNING: Unknown CAS latency 0x%02X, using 3\n",
+					data);
+			}
+		}
+		else if(j == 63) 
+		{
+			if(data != cksum) 
+			{
+				printf ("WARNING: Configuration data checksum failure:"
+					" is 0x%02x, calculated 0x%02x\n",
+				data, cksum);
+			}
+		}
+		cksum += data;
+    }
+
+    /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
+    if(caslatency < 2) {
+		printf("CL was %d, forcing to 2\n", caslatency);
+		caslatency = 2;
+    }
+    if(rows > 14) {
+		printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
+		rows = 14;
+    }
+    if(cols > 11) {
+		printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
+		cols = 11;
+    }
+
+    if((data_width != 64) && (data_width != 72))
+    {
+		printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
+			data_width);
+    }
+    width = 3;		/* 2^3 = 8 bytes = 64 bits wide */
+    /*
+     * Convert banks into log2(banks)
+     */
+    if     (banks == 2)	banks = 1;
+    else if(banks == 4)	banks = 2;
+    else if(banks == 8)	banks = 3;
+
+
+    sdram_size = 1 << (rows + cols + banks + width);
+
+#if(CONFIG_PBI == 0)	/* bank-based interleaving */
+    rowst = ((32 - 6) - (rows + cols + width)) * 2;
+#else
+    rowst = 32 - (rows + banks + cols + width);
+#endif
+
+   or = ~(sdram_size - 1)    |	/* SDAM address mask	*/
+	  ((banks-1) << 13)   |	/* banks per device	*/
+	  (rowst << 9)        |	/* rowst		*/
+	  ((rows - 9) << 6);	/* numr			*/
+
+
+    /*printf("memctl->memc_or2 = 0x%08x\n", or);*/
+
+    /*
+     * SDAM specifies the number of columns that are multiplexed
+     * (reference AN2165/D), defined to be (columns - 6) for page
+     * interleave, (columns - 8) for bank interleave.
+     *
+     * BSMA is 14 - max(rows, cols).  The bank select lines come
+     * into play above the highest "address" line going into the
+     * the SDRAM.
+     */
+#if(CONFIG_PBI == 0)	/* bank-based interleaving */
+    sdam = cols - 8;
+    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+    sda10 = sdam + 2;
+#else
+    sdam = cols - 6;
+    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+    sda10 = sdam;
+#endif
+#if(PESSIMISTIC_SDRAM)
+    psdmr = (CONFIG_PBI              |\
+	     PSDMR_RFEN              |\
+	     PSDMR_RFRC_16_CLK       |\
+	     PSDMR_PRETOACT_8W       |\
+	     PSDMR_ACTTORW_8W        |\
+	     PSDMR_WRC_4C            |\
+	     PSDMR_EAMUX             |\
+             PSDMR_BUFCMD)           |\
+	     caslatency              |\
+	     ((caslatency - 1) << 6) |	/* LDOTOPRE is CL - 1 */ \
+	     (sdam << 24)            |\
+	     (bsma << 21)            |\
+	     (sda10 << 18);
+#else
+    psdmr = (CONFIG_PBI              |\
+	     PSDMR_RFEN              |\
+	     PSDMR_RFRC_7_CLK        |\
+	     PSDMR_PRETOACT_3W       |	/* 1 for 7E parts (fast PC-133) */ \
+	     PSDMR_ACTTORW_2W        |	/* 1 for 7E parts (fast PC-133) */ \
+	     PSDMR_WRC_1C            |	/* 1 clock + 7nSec */
+	     EAMUX                   |\
+             BUFCMD)                 |\
+	     caslatency              |\
+	     ((caslatency - 1) << 6) |	/* LDOTOPRE is CL - 1 */ \
+	     (sdam << 24)            |\
+	     (bsma << 21)            |\
+	     (sda10 << 18);
+#endif
+	/*printf("psdmr = 0x%08x\n", psdmr);*/
+
+    /*
+     * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+     *
+     * "At system reset, initialization software must set up the
+     *  programmable parameters in the memory controller banks registers
+     *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+     *  system software should execute the following initialization sequence
+     *  for each SDRAM device.
+     *
+     *  1. Issue a PRECHARGE-ALL-BANKS command
+     *  2. Issue eight CBR REFRESH commands
+     *  3. Issue a MODE-SET command to initialize the mode register
+     *
+     * Quote from Micron MT48LC8M16A2 data sheet:
+     *
+     *  "...the SDRAM requires a 100uS delay prior to issuing any
+     *  command other than a COMMAND INHIBIT or NOP.  Starting at some
+     *  point during this 100uS period and continuing at least through
+     *  the end of this period, COMMAND INHIBIT or NOP commands should
+     *  be applied."
+     *
+     *  "Once the 100uS delay has been satisfied with at least one COMMAND
+     *  INHIBIT or NOP command having been applied, a /PRECHARGE command/
+     *  should be applied.  All banks must then be precharged, thereby
+     *  placing the device in the all banks idle state."
+     *
+     *  "Once in the idle state, /two/ AUTO REFRESH cycles must be
+     *  performed.  After the AUTO REFRESH cycles are complete, the
+     *  SDRAM is ready for mode register programming."
+     *
+     *  (/emphasis/ mine, gvb)
+     *
+     *  The way I interpret this, Micron start up sequence is:
+     *  1. Issue a PRECHARGE-BANK command (initial precharge)
+     *  2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
+     *  3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
+     *  4. Issue a MODE-SET command to initialize the mode register
+     *
+     *  --------
+     *
+     *  The initial commands are executed by setting P/LSDMR[OP] and
+     *  accessing the SDRAM with a single-byte transaction."
+     *
+     * The appropriate BRx/ORx registers have already been set when we
+     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     */
+#if 1
+    memctl->memc_mptpr = CFG_MPTPR;
+    memctl->memc_psrt  = psrt;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+    *ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+    for (i = 0; i < 8; i++)
+	*ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+    *ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+    *ramaddr = c;
+
+    /*
+     * Do it a second time for the second set of chips if the DIMM has
+     * two chip selects (double sided).
+     */
+    if(chipselects > 1) 
+	{
+        ramaddr += sdram_size;
+
+		memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+		memctl->memc_or3 = or;
+
+		memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+		*ramaddr = c;
+
+		memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+		for (i = 0; i < 8; i++)
+			*ramaddr = c;
+
+		memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+		*ramaddr = c;
+
+		memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+		*ramaddr = c;
+    }
+#endif
+	/*
+    printf("memctl->memc_mptpr = 0x%08x\n", CFG_MPTPR);
+    printf("memctl->memc_psrt  = 0x%08x\n", psrt);
+
+    printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_PREA);
+    printf("ramaddr = 0x%08x\n", ramaddr);
+
+    printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_CBRR);
+
+    printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_MRW);
+
+    printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_NORM | PSDMR_RFEN);
+
+    immap->im_siu_conf.sc_ppc_acr   = 0x00000002;
+    immap->im_siu_conf.sc_ppc_alrh  = 0x01267893;
+    immap->im_siu_conf.sc_tescr1    = 0x00004000;
+	*/
+#if 0
+    /* init sdram dimm */
+    ramaddr                         = (uchar *)CFG_SDRAM_BASE;
+    memctl->memc_psrt               = 0x00000010;
+    immap->im_memctl.memc_or2       = 0xFF000CA0;
+    immap->im_memctl.memc_br2       = 0x00000041;
+    memctl->memc_psdmr              = 0x296EB452;
+    *ramaddr                        = c;
+    memctl->memc_psdmr              = 0x096EB452;
+    for (i = 0; i < 8; i++)
+        *ramaddr                    = c;
+
+    memctl->memc_psdmr              = 0x196EB452;
+    *ramaddr                        = c;
+    memctl->memc_psdmr              = 0x416EB452;
+    *ramaddr                        = c;
+#endif	
+	/* print info */
+	printf("SDRAM configuration read from SPD\n");
+	printf("\tSize per side = %dMB\n", sdram_size >> 20);
+	printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
+	printf("\tRefresh rate = %d, CAS latency = %d\n", psrt, caslatency);
+	printf("\tTotal size: ");
+
+    return (sdram_size * chipselects);
+	/*return (16 * 1024 * 1024);*/
+}

board/mpc8266ads/u-boot.lds

@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc8260/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+

board/r360mpi/flash.c

@@ -24,10 +24,12 @@
  * MA 02111-1307 USA
  */
 
+/* #define DEBUG */
+
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 #if defined(CFG_ENV_IS_IN_FLASH)
 # ifndef  CFG_ENV_ADDR
@@ -52,44 +54,44 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 #define FLASH_PORT_WIDTH16
 
 #ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
+#define FLASH_PORT_WIDTH	ushort
+#define FLASH_PORT_WIDTHV	vu_short
 #else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
+#define FLASH_PORT_WIDTH	ulong
+#define FLASH_PORT_WIDTHV	vu_long
 #endif
 
-#define FPW		FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
+#define FPW			FLASH_PORT_WIDTH
+#define FPWV			FLASH_PORT_WIDTHV
 
 /*-----------------------------------------------------------------------
  * Functions
  */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int   write_data (flash_info_t *info, ulong dest, FPW data);
-static void  flash_get_offsets (ulong base, flash_info_t *info);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
 
 /*-----------------------------------------------------------------------
  */
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
-	size_b0 = flash_get_size((FPW *)FLASH_BASE0_PRELIM, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) FLASH_BASE0_PRELIM, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
+			size_b0, size_b0 << 20);
 	}
 
 	/* Remap FLASH according to real size */
@@ -97,24 +99,24 @@ unsigned long flash_init (void)
 	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
 
 	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
 
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
 	/* monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
-			    &flash_info[0]);
+	(void) flash_protect (FLAG_PROTECT_SET,
+				CFG_FLASH_BASE,
+				CFG_FLASH_BASE + CFG_MONITOR_LEN - 1,
+				&flash_info[0]);
 #endif
 
 #ifdef	CFG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      &flash_info[0]);
+	flash_protect (FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			&flash_info[0]);
 #endif
 
 	flash_info[0].size = size_b0;
@@ -124,7 +126,7 @@ unsigned long flash_init (void)
 
 /*-----------------------------------------------------------------------
  */
-static void flash_get_offsets (ulong base, flash_info_t *info)
+static void flash_get_offsets (ulong base, flash_info_t * info)
 {
 	int i;
 
@@ -141,7 +143,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 
 /*-----------------------------------------------------------------------
  */
-void flash_print_info  (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
 {
 	int i;
 
@@ -151,31 +153,39 @@ void flash_print_info  (flash_info_t *info)
 	}
 
 	switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-		default:		printf ("Unknown Vendor ");	break;
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
 	}
 
 	switch (info->flash_id & FLASH_TYPEMASK) {
-   case FLASH_28F320J3A:
-				printf ("28F320J3A\n"); break;
-   case FLASH_28F640J3A:
-				printf ("28F640J3A\n"); break;
-   case FLASH_28F128J3A:
-				printf ("28F128J3A\n"); break;
-	default:		printf ("Unknown Chip Type\n"); break;
+	case FLASH_28F320J3A:
+		printf ("28F320J3A\n");
+		break;
+	case FLASH_28F640J3A:
+		printf ("28F640J3A\n");
+		break;
+	case FLASH_28F128J3A:
+		printf ("28F128J3A\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
 	}
 
 	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
+			info->size >> 20, info->sector_count);
 
 	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
+	for (i = 0; i < info->sector_count; ++i) {
 		if ((i % 5) == 0)
 			printf ("\n   ");
 		printf (" %08lX%s",
 			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
+			info->protect[i] ? " (RO)" : "     ");
 	}
 	printf ("\n");
 	return;
@@ -192,49 +202,53 @@ void flash_print_info  (flash_info_t *info)
  * The following code cannot be run from FLASH!
  */
 
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
 {
 	FPW value;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW)0x00AA00AA;
-	addr[0x2AAA] = (FPW)0x00550055;
-	addr[0x5555] = (FPW)0x00900090;
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
 
 	value = addr[0];
 
-   switch (value) {
-   case (FPW)INTEL_MANUFACT:
-      info->flash_id = FLASH_MAN_INTEL;
-      break;
+	debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
+
+	switch (value) {
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
-		addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
-		return (0);			/* no or unknown flash	*/
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);			/* no or unknown flash  */
 	}
 
-	value = addr[1];			/* device ID		*/
+	value = addr[1];			/* device ID        */
 
-   switch (value) {
-   case (FPW)INTEL_ID_28F320J3A:
-      info->flash_id += FLASH_28F320J3A;
-      info->sector_count = 32;
-      info->size = 0x00400000;
-      break;            /* => 4 MB     */
+	debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
 
-   case (FPW)INTEL_ID_28F640J3A:
-      info->flash_id += FLASH_28F640J3A;
-      info->sector_count = 64;
-      info->size = 0x00800000;
-      break;            /* => 8 MB     */
+	switch (value) {
+	case (FPW) INTEL_ID_28F320J3A:
+		info->flash_id += FLASH_28F320J3A;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		break;				/* => 4 MB     */
 
-   case (FPW)INTEL_ID_28F128J3A:
-      info->flash_id += FLASH_28F128J3A;
-      info->sector_count = 128;
-      info->size = 0x01000000;
-      break;            /* => 16 MB     */
+	case (FPW) INTEL_ID_28F640J3A:
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		break;				/* => 8 MB     */
+
+	case (FPW) INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x01000000;
+		break;				/* => 16 MB     */
 
 	default:
 		info->flash_id = FLASH_UNKNOWN;
@@ -243,11 +257,11 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 
 	if (info->sector_count > CFG_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
+				info->sector_count, CFG_MAX_FLASH_SECT);
 		info->sector_count = CFG_MAX_FLASH_SECT;
 	}
 
-	addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
 
 	return (info->size);
 }
@@ -256,7 +270,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 /*-----------------------------------------------------------------------
  */
 
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
 	int flag, prot, sect;
 	ulong type, start, now, last;
@@ -279,7 +293,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	}
 
 	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
+	for (sect = s_first; sect <= s_last; ++sect) {
 		if (info->protect[sect]) {
 			prot++;
 		}
@@ -293,44 +307,44 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	}
 
 	start = get_timer (0);
-	last  = start;
+	last = start;
 	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
+	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *)(info->start[sect]);
+			FPWV *addr = (FPWV *) (info->start[sect]);
 			FPW status;
 
 			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
+			flag = disable_interrupts ();
 
-			*addr = (FPW)0x00500050;	/* clear status register */
-			*addr = (FPW)0x00200020;	/* erase setup */
-			*addr = (FPW)0x00D000D0;	/* erase confirm */
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			/* re-enable interrupts if necessary */
 			if (flag)
-				enable_interrupts();
+				enable_interrupts ();
 
 			/* wait at least 80us - let's wait 1 ms */
 			udelay (1000);
 
-			while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = (FPW)0x00B000B0; /* suspend erase	  */
-					*addr = (FPW)0x00FF00FF; /* reset to read mode */
-					rcode = 1;
-					break;
-				}
+			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+			    if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+				printf ("Timeout\n");
+				*addr = (FPW) 0x00B000B0;	/* suspend erase     */
+				*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
+				rcode = 1;
+				break;
+			    }
 
-				/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-					putc ('.');
-					last = now;
-				}
+			    /* show that we're waiting */
+			    if ((now - last) > 1000) {	/* every second */
+				putc ('.');
+				last = now;
+			    }
 			}
 
-			*addr = (FPW)0x00FF00FF;	/* reset to read mode */
+			*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
 		}
 	}
 	printf (" done\n");
@@ -345,15 +359,12 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
  * 4 - Flash not identified
  */
 
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 	ulong cp, wp;
 	FPW data;
-#if 0
-	int count, i, l, rc, port_width;
-#else
+
 	int i, l, rc, port_width;
-#endif
 
 	if (info->flash_id == FLASH_UNKNOWN) {
 		return 4;
@@ -372,19 +383,19 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 */
 	if ((l = addr - wp) != 0) {
 		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
 		}
-		for (; i<port_width && cnt>0; ++i) {
+		for (; i < port_width && cnt > 0; ++i) {
 			data = (data << 8) | *src++;
 			--cnt;
 			++cp;
 		}
-		for (; cnt==0 && i<port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
 		}
 
-		if ((rc = write_data(info, wp, data)) != 0) {
+		if ((rc = write_data (info, wp, data)) != 0) {
 			return (rc);
 		}
 		wp += port_width;
@@ -393,26 +404,16 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	/*
 	 * handle word aligned part
 	 */
-#if 0
-	count = 0;
-#endif
 	while (cnt >= port_width) {
 		data = 0;
-		for (i=0; i<port_width; ++i) {
+		for (i = 0; i < port_width; ++i) {
 			data = (data << 8) | *src++;
 		}
-		if ((rc = write_data(info, wp, data)) != 0) {
+		if ((rc = write_data (info, wp, data)) != 0) {
 			return (rc);
 		}
-		wp  += port_width;
+		wp += port_width;
 		cnt -= port_width;
-#if 0
-		if (count++ > 0x20000)
-		{
-			putc('.');
-			count = 0;
-		}
-#endif
 	}
 
 	if (cnt == 0) {
@@ -423,15 +424,15 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 * handle unaligned tail bytes
 	 */
 	data = 0;
-	for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
 		data = (data << 8) | *src++;
 		--cnt;
 	}
-	for (; i<port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
 	}
 
-	return (write_data(info, wp, data));
+	return (write_data (info, wp, data));
 }
 
 /*-----------------------------------------------------------------------
@@ -440,39 +441,38 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
+static int write_data (flash_info_t * info, ulong dest, FPW data)
 {
-	FPWV *addr = (FPWV *)dest;
+	FPWV *addr = (FPWV *) dest;
 	ulong status;
 	ulong start;
 	int flag;
 
 	/* Check if Flash is (sufficiently) erased */
 	if ((*addr & data) != data) {
-		printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
+	flag = disable_interrupts ();
 
-	*addr = (FPW)0x00400040;		/* write setup */
+	*addr = (FPW) 0x00400040;	/* write setup */
 	*addr = data;
 
 	/* re-enable interrupts if necessary */
 	if (flag)
-		enable_interrupts();
+		enable_interrupts ();
 
 	start = get_timer (0);
 
-	while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*addr = (FPW)0x00FF00FF;	/* restore read mode */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
 	}
 
-	*addr = (FPW)0x00FF00FF;	/* restore read mode */
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 
 	return (0);
 }
-

board/w7o/init.S

@@ -162,6 +162,7 @@ sdram_init:
 	 * contents of the SPD EEPROM.  If the SPD EEPROM is blank or
 	 * erronious, spd_sdram returns 0 in R3.
 	 */
+	li	r3,0
 	bl	spd_sdram
 	addic.	r3, r3, 0		/* Check for error, save dram size */
 	bne	..sdri_done		/* If it worked, we're done... */

board/walnut405/walnut405.c

@@ -20,13 +20,11 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-long int spd_sdram (void);
 
 #include <common.h>
 #include "walnut405.h"
 #include <asm/processor.h>
-
-
+#include <spd_sdram.h>
 
 int board_pre_init (void)
 {
@@ -118,11 +116,8 @@ int checkboard (void)
   the necessary info for SDRAM controller configuration
    ------------------------------------------------------------------------- */
 long int initdram (int board_type)
-{
-	long int ret;
-
-	ret = spd_sdram ();
-	return ret;
+{	
+	return  spd_sdram (0);
 }
 
 /* ------------------------------------------------------------------------- */

common/env_flash.c

@@ -374,4 +374,4 @@ void env_relocate_spec (void)
 #endif /* ! ENV_IS_EMBEDDED || CFG_ENV_ADDR_REDUND */
 }
 
-#endif /* CFG_ENV_IS_IN_FLASH) */
+#endif /* CFG_ENV_IS_IN_FLASH */

cpu/mpc824x/Makefile

@@ -27,13 +27,16 @@ LIB	= lib$(CPU).a
 
 START	= start.S drivers/i2c/i2c2.o
 OBJS	= traps.o cpu.o cpu_init.o interrupts.o speed.o \
-          drivers/epic/epic1.o drivers/i2c/i2c1.o pci.o
+          drivers/epic/epic1.o drivers/i2c/i2c1.o pci.o bedbug_603e.o
 
 all:	.depend $(START) $(LIB)
 
 $(LIB):	$(OBJS)
 	$(AR) crv $@ $(OBJS) drivers/i2c/i2c2.o
 
+bedbug_603e.c:
+	ln -s ../mpc8260/bedbug_603e.c bedbug_603e.c
+
 #########################################################################
 
 .depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)

cpu/mpc824x/start.S

@@ -336,7 +336,7 @@ _end_back:
 	STD_EXCEPTION(EXC_OFF_ITME, InstructionTransMiss, UnknownException)
 	STD_EXCEPTION(EXC_OFF_DLTME, DataLoadTransMiss, UnknownException)
 	STD_EXCEPTION(EXC_OFF_DSTME, DataStoreTransMiss, UnknownException)
-	STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, UnknownException)
+	STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, DebugException)
 	STD_EXCEPTION(EXC_OFF_SMIE, SysManageInt, UnknownException)
 	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
 	STD_EXCEPTION(0x1600, Reserved6, UnknownException)

cpu/mpc824x/traps.c

@@ -176,6 +176,21 @@ UnknownException(struct pt_regs *regs)
 	_exception(0, regs);
 }
 
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+void
+DebugException(struct pt_regs *regs)
+{
+
+  printf("Debugger trap at @ %lx\n", regs->nip );
+  show_regs(regs);
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+  do_bedbug_breakpoint( regs );
+#endif
+}
+
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */

cpu/ppc4xx/spd_sdram.c

@@ -4,8 +4,8 @@
  *
  * Based on code by:
  *
- * Kenneth Johansson ,Ericsson Business Innovation.
- * kenneth.johansson@inn.ericsson.se
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
  *
  * hacked up by bill hunter. fixed so we could run before
  * serial_init and console_init. previous version avoided this by
@@ -87,25 +87,16 @@
 #define SDRAM0_BXCR_SZ(x)  ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
 #define SDRAM0_BXCR_AM(x)  ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
 
-#ifdef CONFIG_W7O
+#ifdef CONFIG_SPDDRAM_SILENT
 # define SPD_ERR(x) do { return 0; } while (0)
 #else
-# define SPD_ERR(x) do { printf(x); hang(); } while (0)
+# define SPD_ERR(x) do { printf(x); return(0); } while (0)
 #endif
 
-/*
- * what we really want is
- * (1/hertz) but we don't want to use floats so multiply with 10E9
- *
- * The error needs to be on the safe side so we want the floor function.
- * This means we get an exact value or we calculate that our bus frequency is
- * a bit faster than it really is and thus we don't progam the sdram controller
- * to run to fast
- */
 #define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
 
 /* function prototypes */
-int spd_read(uint addr);			/* prototype */
+int spd_read(uint addr);
 
 
 /*
@@ -114,17 +105,17 @@ int spd_read(uint addr);			/* prototype */
  *
  * This works on boards that has the same schematics that the IBM walnut has.
  *
- * BUG: Don't handle ECC memory
- * BUG: A few values in the TR register is currently hardcoded
+ * Input: null for default I2C spd functions or a pointer to a custom function
+ * returning spd_data.
  */
 
-long int spd_sdram(void)
+long int spd_sdram(int(read_spd)(uint addr))
 {
 	int bus_period,tmp,row,col;
 	int total_size,bank_size,bank_code;
 	int ecc_on;
-	int mode = 4;
-	int bank_cnt = 1;
+	int mode;
+	int bank_cnt;
 
 	int sdram0_pmit=0x07c00000;
 	int sdram0_besr0=-1;
@@ -144,14 +135,19 @@ long int spd_sdram(void)
 
 	int t_rp;
 	int t_rcd;
-	int t_rc = 70; /* This value not available in SPD_EEPROM */
-	int min_cas = 2;
+	int t_ras;
+	int t_rc;
+	int min_cas;
 
+	if(read_spd == 0){
+		read_spd=spd_read;
 	/*
 	 * Make sure I2C controller is initialized
 	 * before continuing.
 	 */
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+		i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	}
+
 
 	/*
 	 * Calculate the bus period, we do it this
@@ -162,7 +158,7 @@ long int spd_sdram(void)
 	bus_period = sdram_HZ_to_ns(tmp);	/* get sdram speed */
 
      	/* Make shure we are using SDRAM */
-	if (spd_read(2) != 0x04){
+	if (read_spd(2) != 0x04){
           SPD_ERR("SDRAM - non SDRAM memory module found\n");
      	  }
 
@@ -180,34 +176,35 @@ long int spd_sdram(void)
       * use the min supported mode
       */
 
-	tmp = spd_read(127) & 0x6;
+	tmp = read_spd(127) & 0x6;
      if(tmp == 0x02){      	   /* only cas = 2 supported */
      	  min_cas = 2;
-/*     	  t_ck = spd_read(9); */
-/*     	  t_ac = spd_read(10); */
+/*     	  t_ck = read_spd(9); */
+/*     	  t_ac = read_spd(10); */
 	  }
      else if (tmp == 0x04){         /* only cas = 3 supported */
      	  min_cas = 3;
-/*     	  t_ck = spd_read(9); */
-/*     	  t_ac = spd_read(10); */
+/*     	  t_ck = read_spd(9); */
+/*     	  t_ac = read_spd(10); */
 	  }
      else if (tmp == 0x06){         /* 2,3 supported, so use 2 */
      	  min_cas = 2;
-/*     	  t_ck = spd_read(23); */
-/*     	  t_ac = spd_read(24); */
+/*     	  t_ck = read_spd(23); */
+/*     	  t_ac = read_spd(24); */
 	  }
      else {
 	     SPD_ERR("SDRAM - unsupported CAS latency \n");
 	}
 
-     /* get some timing values, t_rp,t_rcd
+     /* get some timing values, t_rp,t_rcd,t_ras,t_rc
      */
-     t_rp = spd_read(27);
-     t_rcd = spd_read(29);
-
+     t_rp = read_spd(27);
+     t_rcd = read_spd(29);
+     t_ras = read_spd(30);
+     t_rc = t_ras + t_rp;
 
      /* The following timing calcs subtract 1 before deviding.
-      * this has effect of using ceiling intead of floor rounding,
+      * this has effect of using ceiling instead of floor rounding,
       * and also subtracting 1 to convert number to reg value
       */
      /* set up CASL */
@@ -216,12 +213,12 @@ long int spd_sdram(void)
      sdram0_tr |= (((t_rp - 1)/bus_period) & 0x3) << SDRAM0_TR_PTA_SHIFT;
      /* set up CTP */
      tmp = ((t_rc - t_rcd - t_rp -1) / bus_period) & 0x3;
-     if(tmp<1) SPD_ERR("SDRAM - unsupported prech to act time (Trp)\n");
+     if(tmp<1) tmp=1;
      sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
      /* set LDF	= 2 cycles, reg value = 1 */
      sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
      /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
-	tmp = ((t_rc - 1) / bus_period)-4;
+	tmp = ( (t_rc - 1) / bus_period)-3;
 	if(tmp<0)tmp=0;
 	if(tmp>6)tmp=6;
 	sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
@@ -232,9 +229,9 @@ long int spd_sdram(void)
 /*------------------------------------------------------------------
   configure RTR register
   -------------------------------------------------------------------*/
-     row = spd_read(3);
-     col = spd_read(4);
-     tmp = spd_read(12) & 0x7f ; /* refresh type less self refresh bit */
+     row = read_spd(3);
+     col = read_spd(4);
+     tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
      switch(tmp){
 	case 0x00:
 	  tmp=15625;
@@ -265,9 +262,9 @@ long int spd_sdram(void)
   determine the number of banks used
   -------------------------------------------------------------------*/
 	/* byte 7:6 is module data width */
-	if(spd_read(7) != 0)
+	if(read_spd(7) != 0)
 	    SPD_ERR("SDRAM - unsupported module width\n");
-	tmp = spd_read(6);
+	tmp = read_spd(6);
 	if (tmp < 32)
 	    SPD_ERR("SDRAM - unsupported module width\n");
 	else if (tmp < 64)
@@ -280,7 +277,7 @@ long int spd_sdram(void)
 	    SPD_ERR("SDRAM - unsupported module width\n");
 
 	/* byte 5 is the module row count (refered to as dimm "sides") */
-	tmp = spd_read(5);
+	tmp = read_spd(5);
 	if(tmp==1);
 	else if(tmp==2) bank_cnt *=2;
 	else if(tmp==4) bank_cnt *=4;
@@ -292,7 +289,7 @@ long int spd_sdram(void)
 	/* now check for ECC ability of module. We only support ECC
 	 *   on 32 bit wide devices with 8 bit ECC.
 	 */
-	if ( (spd_read(11)==2) && ((spd_read(6)==40) || (spd_read(14)==8)) ){
+	if ( (read_spd(11)==2) && ((read_spd(6)==40) || (read_spd(14)==8)) ){
 	   sdram0_ecccfg=0xf<<SDRAM0_ECCCFG_SHIFT;
 	   ecc_on = 1;
    	}
@@ -305,15 +302,15 @@ long int spd_sdram(void)
 	calculate total size
   -------------------------------------------------------------------*/
 	/* calculate total size and do sanity check */
-	tmp = spd_read(31);
+	tmp = read_spd(31);
 	total_size=1<<22;	/* total_size = 4MB */
-	/* now multiply 4M by the smallest device roe density */
+	/* now multiply 4M by the smallest device row density */
 	/* note that we don't support asymetric rows */
 	while (((tmp & 0x0001) == 0) && (tmp != 0)){
 	    total_size= total_size<<1;
 	    tmp = tmp>>1;
 	    }
-	total_size *= spd_read(5);	/* mult by module rows (dimm sides) */
+	total_size *= read_spd(5);	/* mult by module rows (dimm sides) */
 
 /*------------------------------------------------------------------
 	map  rows * cols * banks to a mode
@@ -357,7 +354,7 @@ long int spd_sdram(void)
 			break;
 		case 9:
 		case 10:
-			if (spd_read(17) ==2 )
+			if (read_spd(17) ==2 )
 				mode=6; /* mode 7 */
 			else
 				mode=2; /* mode 3 */

cpu/xscale/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= serial.o interrupts.o cpu.o
+OBJS	= serial.o interrupts.o cpu.o i2c.o
 
 all:	.depend $(START) $(LIB)
 

cpu/xscale/i2c.c

@@ -0,0 +1,453 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2003 Pengutronix e.K.
+ * Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Back ported to the 8xx platform (from the 8260 platform) by
+ * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
+ */
+
+/* FIXME: this file is PXA255 specific! What about other XScales? */
+
+#include <common.h>
+
+#ifdef CONFIG_HARD_I2C
+
+/* 
+ *	- CFG_I2C_SPEED 
+ *	- I2C_PXA_SLAVE_ADDR 
+ */
+
+#include <asm/arch/pxa-regs.h>
+#include <i2c.h>
+
+//#define	DEBUG_I2C 	1	/* activate local debugging output  */
+#define I2C_PXA_SLAVE_ADDR	0x1	/* slave pxa unit address           */
+#define I2C_ICR_INIT		(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+#define I2C_ISR_INIT		0x7FF
+
+#ifdef DEBUG_I2C
+#define PRINTD(x) printf x
+#else
+#define PRINTD(x)
+#endif
+
+
+/* Shall the current transfer have a start/stop condition? */
+#define I2C_COND_NORMAL		0
+#define I2C_COND_START		1
+#define I2C_COND_STOP		2
+
+/* Shall the current transfer be ack/nacked or being waited for it? */
+#define I2C_ACKNAK_WAITACK	1	
+#define I2C_ACKNAK_SENDACK	2
+#define I2C_ACKNAK_SENDNAK	4
+
+/* Specify who shall transfer the data (master or slave) */
+#define I2C_READ		0
+#define I2C_WRITE		1
+
+/* All transfers are described by this data structure */
+struct i2c_msg {
+	u8 condition;
+	u8 acknack; 
+	u8 direction; 
+	u8 data;
+};
+
+
+/**
+ * i2c_pxa_reset: - reset the host controller 
+ *
+ */
+
+static void i2c_reset( void )
+{
+	ICR &= ~ICR_IUE;		/* disable unit */
+        ICR |= ICR_UR;			/* reset the unit */
+        udelay(100);
+        ICR &= ~ICR_IUE;		/* disable unit */
+        CKEN |= CKEN14_I2C;		/* set the global I2C clock on */
+        ISAR = I2C_PXA_SLAVE_ADDR;	/* set our slave address */
+        ICR = I2C_ICR_INIT;		/* set control register values */
+        ISR = I2C_ISR_INIT;		/* set clear interrupt bits */
+        ICR |= ICR_IUE;			/* enable unit */
+        udelay(100);
+}
+
+
+/**
+ * i2c_isr_set_cleared: - wait until certain bits of the I2C status register 
+ *	                  are set and cleared
+ *
+ * @return: 0 in case of success, 1 means timeout (no match within 10 ms). 
+ */
+
+static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask )
+{
+	int timeout = 10000;
+
+	while( ((ISR & set_mask)!=set_mask) || ((ISR & cleared_mask)!=0) ){
+		udelay( 10 );
+		if( timeout-- < 0 ) return 0;
+	}
+
+        return 1;
+}
+
+
+/**
+ * i2c_transfer: - Transfer one byte over the i2c bus
+ *
+ * This function can tranfer a byte over the i2c bus in both directions. 
+ * It is used by the public API functions. 
+ *
+ * @return:  0: transfer successful
+ *          -1: message is empty
+ *          -2: transmit timeout
+ *          -3: ACK missing
+ *          -4: receive timeout
+ *          -5: illegal parameters
+ *          -6: bus is busy and couldn't be aquired
+ */ 
+int i2c_transfer(struct i2c_msg *msg)
+{
+	int ret;
+
+	if (!msg) 
+		goto transfer_error_msg_empty;
+
+	switch(msg->direction) {
+
+	case I2C_WRITE:
+
+		/* check if bus is not busy */
+		if (!i2c_isr_set_cleared(0,ISR_IBB))
+			goto transfer_error_bus_busy;
+
+		/* start transmission */
+		ICR &= ~ICR_START;
+		ICR &= ~ICR_STOP;
+		IDBR = msg->data;
+		if (msg->condition == I2C_COND_START)     ICR |=  ICR_START;
+		if (msg->condition == I2C_COND_STOP)      ICR |=  ICR_STOP; 
+		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
+		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
+		ICR &= ~ICR_ALDIE;
+		ICR |= ICR_TB; 
+
+		/* transmit register empty? */
+		if (!i2c_isr_set_cleared(ISR_ITE,0)) 
+			goto transfer_error_transmit_timeout;
+
+		/* clear 'transmit empty' state */
+		ISR |= ISR_ITE;
+
+		/* wait for ACK from slave */
+		if (msg->acknack == I2C_ACKNAK_WAITACK)
+			if (!i2c_isr_set_cleared(0,ISR_ACKNAK)) 
+				goto transfer_error_ack_missing;
+		break;
+
+	case I2C_READ:
+
+		/* check if bus is not busy */
+		if (!i2c_isr_set_cleared(0,ISR_IBB))
+			goto transfer_error_bus_busy;
+
+		/* start receive */
+		ICR &= ~ICR_START;
+		ICR &= ~ICR_STOP;
+		if (msg->condition == I2C_COND_START) 	  ICR |= ICR_START;
+		if (msg->condition == I2C_COND_STOP)  	  ICR |= ICR_STOP;
+		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
+		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
+		ICR &= ~ICR_ALDIE;
+		ICR |= ICR_TB;
+
+		/* receive register full? */
+		if (!i2c_isr_set_cleared(ISR_IRF,0)) 
+			goto transfer_error_receive_timeout; 
+
+		msg->data = IDBR;
+
+		/* clear 'receive empty' state */
+		ISR |= ISR_IRF;
+
+		break;
+
+	default:
+
+		goto transfer_error_illegal_param;
+
+	}
+
+	return 0; 
+
+transfer_error_msg_empty: 
+		PRINTD(("i2c_transfer: error: 'msg' is empty\n"));
+		ret = -1; goto i2c_transfer_finish;
+
+transfer_error_transmit_timeout:
+		PRINTD(("i2c_transfer: error: transmit timeout\n"));
+		ret = -2; goto i2c_transfer_finish;
+
+transfer_error_ack_missing:
+		PRINTD(("i2c_transfer: error: ACK missing\n"));
+		ret = -3; goto i2c_transfer_finish;
+
+transfer_error_receive_timeout:
+		PRINTD(("i2c_transfer: error: receive timeout\n"));
+		ret = -4; goto i2c_transfer_finish;
+
+transfer_error_illegal_param:
+		PRINTD(("i2c_transfer: error: illegal parameters\n"));
+		ret = -5; goto i2c_transfer_finish;
+
+transfer_error_bus_busy:
+		PRINTD(("i2c_transfer: error: bus is busy\n"));
+		ret = -6; goto i2c_transfer_finish;
+
+i2c_transfer_finish:
+		PRINTD(("i2c_transfer: ISR: 0x%04x\n",ISR));
+		i2c_reset();
+		return ret;
+
+}
+
+/* ------------------------------------------------------------------------ */
+/* API Functions                                                            */
+/* ------------------------------------------------------------------------ */
+
+void i2c_init(int speed, int slaveaddr)
+{
+}
+
+
+/**
+ * i2c_probe: - Test if a chip answers for a given i2c address
+ *
+ * @chip:	address of the chip which is searched for 
+ * @return: 	0 if a chip was found, -1 otherwhise
+ */
+
+int i2c_probe(uchar chip)
+{
+	struct i2c_msg msg;
+
+	i2c_reset();
+
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1) + 1;
+	if (i2c_transfer(&msg)) return -1;
+
+	msg.condition = I2C_COND_STOP;
+	msg.acknack   = I2C_ACKNAK_SENDNAK;
+	msg.direction = I2C_READ;
+	msg.data      = 0x00;
+	if (i2c_transfer(&msg)) return -1;
+
+	return 0;
+}
+
+
+/**
+ * i2c_read: - Read multiple bytes from an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file) 
+ *
+ * @chip:	address of the chip which is to be read
+ * @addr:	i2c data address within the chip
+ * @alen:	length of the i2c data address (1..2 bytes)
+ * @buffer:	where to write the data
+ * @len:	how much byte do we want to read
+ * @return:	0 in case of success
+ */
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	struct i2c_msg msg;
+	u8 addr_bytes[3]; /* lowest...highest byte of data address */
+	int ret;
+
+	PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
+
+	i2c_reset();
+
+	/* dummy chip address write */
+	PRINTD(("i2c_read: dummy chip address write\n"));
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1);
+	msg.data     &= 0xFE;
+	if ((ret=i2c_transfer(&msg))) return -1;
+	
+	/*
+	 * send memory address bytes; 
+	 * alen defines how much bytes we have to send. 
+	 */
+	//addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1);
+	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
+	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
+	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
+
+	while (--alen >= 0) {
+
+		PRINTD(("i2c_read: send memory word address byte %1d\n",alen));
+		msg.condition = I2C_COND_NORMAL;
+		msg.acknack   = I2C_ACKNAK_WAITACK;
+		msg.direction = I2C_WRITE;
+		msg.data      = addr_bytes[alen];
+		if ((ret=i2c_transfer(&msg))) return -1;
+	}
+	
+
+	/* start read sequence */
+	PRINTD(("i2c_read: start read sequence\n"));
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1);
+	msg.data     |= 0x01;
+	if ((ret=i2c_transfer(&msg))) return -1;
+
+	/* read bytes; send NACK at last byte */
+	while (len--) {
+
+		if (len==0) { 
+			msg.condition = I2C_COND_STOP;
+			msg.acknack   = I2C_ACKNAK_SENDNAK;
+		} else {
+			msg.condition = I2C_COND_NORMAL;
+			msg.acknack   = I2C_ACKNAK_SENDACK;
+		}
+
+		msg.direction = I2C_READ;
+		msg.data      = 0x00;
+		if ((ret=i2c_transfer(&msg))) return -1;
+
+		*(buffer++) = msg.data;
+
+		PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
+
+	}
+
+	i2c_reset();
+
+	return 0;
+}
+
+
+/**
+ * i2c_write: -  Write multiple bytes to an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file) 
+ *
+ * @chip:	address of the chip which is to be written
+ * @addr:	i2c data address within the chip
+ * @alen:	length of the i2c data address (1..2 bytes)
+ * @buffer:	where to find the data to be written 
+ * @len:	how much byte do we want to read
+ * @return:	0 in case of success
+ */
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	struct i2c_msg msg;
+	u8 addr_bytes[3]; /* lowest...highest byte of data address */
+
+	PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
+
+	i2c_reset();
+
+	/* chip address write */
+	PRINTD(("i2c_write: chip address write\n"));
+	msg.condition = I2C_COND_START;
+	msg.acknack   = I2C_ACKNAK_WAITACK;
+	msg.direction = I2C_WRITE;
+	msg.data      = (chip << 1);
+	msg.data     &= 0xFE;
+	if (i2c_transfer(&msg)) return -1;
+	
+	/*
+	 * send memory address bytes; 
+	 * alen defines how much bytes we have to send. 
+	 */
+	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
+	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
+	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
+
+	while (--alen >= 0) {
+
+		PRINTD(("i2c_write: send memory word address\n"));
+		msg.condition = I2C_COND_NORMAL;
+		msg.acknack   = I2C_ACKNAK_WAITACK;
+		msg.direction = I2C_WRITE;
+		msg.data      = addr_bytes[alen];
+		if (i2c_transfer(&msg)) return -1;
+	}
+		
+	/* write bytes; send NACK at last byte */
+	while (len--) {
+
+		PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
+
+		if (len==0) 
+			msg.condition = I2C_COND_STOP;
+		else
+			msg.condition = I2C_COND_NORMAL;
+
+		msg.acknack   = I2C_ACKNAK_WAITACK;
+		msg.direction = I2C_WRITE;
+		msg.data      = *(buffer++);
+		
+		if (i2c_transfer(&msg)) return -1;
+
+	}
+
+	i2c_reset();
+
+	return 0;
+
+}
+
+uchar i2c_reg_read (uchar chip, uchar reg)
+{
+	PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
+	return 0;
+}
+
+void  i2c_reg_write(uchar chip, uchar reg, uchar val)
+{
+	PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val));
+}
+
+#endif	/* CONFIG_HARD_I2C */

doc/README.POST

@@ -0,0 +1,732 @@
+Power-On-Self-Test support in U-Boot
+------------------------------------
+
+This project is to support Power-On-Self-Test (POST) in U-Boot.
+
+1. High-level requirements
+
+The key rquirements for this project are as follows:
+
+1) The project shall develop a flexible framework for implementing
+   and running Power-On-Self-Test in U-Boot. This framework shall
+   possess the following features:
+
+   o) Extensibility
+
+      The framework shall allow adding/removing/replacing POST tests.
+      Also, standalone POST tests shall be supported.
+
+   o) Configurability
+
+      The framework shall allow run-time configuration of the lists
+      of tests running on normal/power-fail booting.
+
+   o) Controllability
+
+      The framework shall support manual running of the POST tests.
+
+2) The results of tests shall be saved so that it will be possible to
+   retrieve them from Linux.
+
+3) The following POST tests shall be developed for MPC823E-based
+   boards:
+
+   o) CPU test
+   o) Cache test
+   o) Memory test
+   o) Ethernet test
+   o) Serial channels test
+   o) Watchdog timer test
+   o) RTC test
+   o) I2C test
+   o) SPI test
+   o) USB test
+
+4) The LWMON board shall be used for reference.
+
+2. Design
+
+This section details the key points of the design for the project.
+The whole project can be divided into two independent tasks:
+enhancing U-Boot/Linux to provide a common framework for running POST
+tests and developing such tests for particular hardware.
+
+2.1. Hardware-independent POST layer
+
+A new optional module will be added to U-Boot, which will run POST
+tests and collect their results at boot time. Also, U-Boot will
+support running POST tests manually at any time by executing a
+special command from the system console.
+
+The list of available POST tests will be configured at U-Boot build
+time. The POST layer will allow the developer to add any custom POST
+tests. All POST tests will be divided into the following groups:
+
+  1) Tests running on power-on booting only
+
+     This group will contain those tests that run only once on
+     power-on reset (e.g. watchdog test)
+
+  2) Tests running on normal booting only
+
+     This group will contain those tests that do not take much
+     time and can be run on the regular basis (e.g. CPU test)
+
+  3) Tests running on power-fail booting only
+
+     This group will contain POST tests that consume much time
+     and cannot be run regularly (e.g. I2C test)
+
+  4) Manually executed tests
+
+     This group will contain those tests that can be run manually.
+
+If necessary, some tests may belong to several groups simultaneously.
+For example, SDRAM test may run on both noarmal and power-fail
+booting. On normal booting, SDRAM test may perform a fast superficial
+memory test only, while running on power-fail booting it may perform
+a full memory check-up.
+
+Also, all tests will be discriminated by the moment they run at.
+Specifically, the following groups will be singled out:
+
+  1) Tests running before relocating to RAM
+
+     These tests will run immediatelly after initializing RAM
+     as to enable modifying it without taking care of its
+     contents. Basically, this group will contain memory tests
+     only.
+
+  2) Tests running after relocating to RAM
+
+     These tests will run immediately before entering the main
+     loop as to guarantee full hardware initialization.
+
+The POST layer will also distinguish a special group of tests that
+may cause system rebooting (e.g. watchdog test). For such tests, the
+layer will automatically detect rebooting and will notify the test
+about it.
+
+2.1.1. POST layer interfaces
+
+This section details the interfaces between the POST layer and the
+rest of U-Boot.
+
+The following flags will be defined:
+
+#define POST_ROM		0x01	/* test runs in ROM */
+#define POST_RAM		0x02	/* test runs in RAM */
+#define POST_POWERON		0x04	/* test runs on power-on booting */
+#define POST_NORMAL		0x08	/* test runs on normal booting */
+#define POST_SHUTDOWN		0x10	/* test runs on power-fail booting */
+#define POST_MANUAL		0x20	/* test can be executed manually */
+#define POST_REBOOT		0x80	/* test may cause rebooting */
+
+The POST layer will export the following interface routines:
+
+  o) int post_run(bd_t *bd, char *name, int flags);
+
+     This routine will run the test (or the group of tests) specified
+     by the name and flag arguments. More specifically, if the name
+     argument is not NULL, the test with this name will be performed,
+     otherwise all tests running in ROM/RAM (depending on the flag
+     argument) will be executed. This routine will be called at least
+     twice with name set to NULL, once from board_init_f() and once
+     from board_init_r(). The flags argument will also specify the
+     mode the test is executed in (power-on, normal, power-fail,
+     manual).
+
+  o) void post_reloc(ulong offset);
+
+     This routine will be called from board_init_r() and will
+     relocate the POST test table.
+
+  o) int post_info(char *name);
+
+     This routine will print the list of all POST tests that can be
+     executed manually if name is NULL, and the description of a
+     particular test if name is not NULL.
+
+  o) int post_log(char *format, ...);
+
+     This routine will be called from POST tests to log their
+     results. Basically, this routine will print the results to
+     stderr. The format of the arguments and the return value
+     will be identical to the printf() routine.
+
+Also, the following board-specific routines will be called from the
+U-Boot common code:
+
+  o) int board_power_mode(void)
+
+     This routine will return the mode the system is running in
+     (POST_POWERON, POST_NORMAL or POST_SHUTDOWN).
+
+  o) void board_poweroff(void)
+
+     This routine will turn off the power supply of the board. It
+     will be called on power-fail booting after running all POST
+     tests.
+
+The list of available POST tests be kept in the post_tests array
+filled at U-Boot build time. The format of entry in this array will
+be as follows:
+
+struct post_test {
+    char *name;
+    char *cmd;
+    char *desc;
+    int flags;
+    int (*test)(bd_t *bd, int flags);
+};
+
+  o) name
+
+     This field will contain a short name of the test, which will be
+     used in logs and on listing POST tests (e.g. CPU test).
+
+  o) cmd
+
+     This field will keep a name for identifying the test on manual
+     testing (e.g. cpu). For more information, refer to section
+     "Command line interface".
+
+  o) desc
+
+     This field will contain a detailed description of the test,
+     which will be printed on user request. For more information, see
+     section "Command line interface".
+
+  o) flags
+
+     This field will contain a combination of the bit flags described
+     above, which will specify the mode the test is running in
+     (power-on, normal, power-fail or manual mode), the moment it
+     should be run at (before or after relocating to RAM), whether it
+     can cause system rebooting or not.
+
+  o) test
+
+     This field will contain a pointer to the routine that will
+     perform the test, which will take 2 arguments. The first
+     argument will be a pointer to the board info structure, while
+     the second will be a combination of bit flags specifying the
+     mode the test is running in (POST_POWERON, POST_NORMAL,
+     POST_POWERFAIL, POST_MANUAL) and whether the last execution of
+     the test caused system rebooting (POST_REBOOT). The routine will
+     return 0 on successful execution of the test, and 1 if the test
+     failed.
+
+The lists of the POST tests that should be run at power-on/normal/
+power-fail booting will be kept in the environment. Namely, the
+following environment variables will be used: post_poweron,
+powet_normal, post_shutdown.
+
+2.1.2. Test results
+
+The results of tests will be collected by the POST layer. The POST
+log will have the following format:
+
+...
+--------------------------------------------
+START <name>
+<test-specific output>
+[PASSED|FAILED]
+--------------------------------------------
+...
+
+Basically, the results of tests will be printed to stderr. This
+feature may be enhanced in future to spool the log to a serial line,
+save it in non-volatile RAM (NVRAM), transfer it to a dedicated
+storage server and etc.
+
+2.1.3. Integration issues
+
+All POST-related code will be #ifdef'ed with the CONFIG_POST macro.
+This macro will be defined in the config_<board>.h file for those
+boards that need POST. The CONFIG_POST macro will contain the list of
+POST tests for the board. The macro will have the format of array
+composed of post_test structures:
+
+#define CONFIG_POST \
+	{
+		"On-board peripherals test", "board", \
+		"  This test performs full check-up of the " \
+		"on-board hardware.", \
+		POST_RAM | POST_POWERFAIL, \
+		&board_post_test \
+	}
+
+A new file, post.h, will be created in the include/ directory. This
+file will contain common POST declarations and will define a set of
+macros that will be reused for defining CONFIG_POST. As an example,
+the following macro may be defined:
+
+#define POST_CACHE \
+	{
+		"Cache test", "cache", \
+		"  This test verifies the CPU cache operation.", \
+		POST_RAM | POST_NORMAL, \
+		&cache_post_test \
+	}
+
+A new subdirectory will be created in the U-Boot root directory. It
+will contain the source code of the POST layer and most of POST
+tests. Each POST test in this directory will be placed into a
+separate file (it will be needed for building standalone tests). Some
+POST tests (mainly those for testing peripheral devices) will be
+located in the source files of the drivers for those devices. This
+way will be used only if the test subtantially uses the driver.
+
+2.1.4. Standalone tests
+
+The POST framework will allow to develop and run standalone tests. A
+user-space library will be developed to provide the POST interface
+functions to standalone tests.
+
+2.1.5. Command line interface
+
+A new command, diag, will be added to U-Boot. This command will be
+used for listing all available hardware tests, getting detailed
+descriptions of them and running these tests.
+
+More specifically, being run without any arguments, this command will
+print the list of all available hardware tests:
+
+=> diag
+Available hardware tests:
+  cache             - cache test
+  cpu               - CPU test
+  enet              - SCC/FCC ethernet test
+Use 'diag [<test1> [<test2>]] ... ' to get more info.
+Use 'diag run [<test1> [<test2>]] ... ' to run tests.
+=>
+
+If the first argument to the diag command is not 'run', detailed
+descriptions of the specified tests will be printed:
+
+=> diag cpu cache
+cpu - CPU test
+  This test verifies the arithmetic logic unit of CPU.
+cache - cache test
+  This test verifies the CPU cache operation.
+=>
+
+If the first argument to diag is 'run', the specified tests will be
+executed. If no tests are specified, all available tests will be
+executed.
+
+It will be prohibited to execute tests running in ROM manually. The
+'diag' command will not display such tests and/or run them.
+
+2.1.6. Power failure handling
+
+The Linux kernel will be modified to detect power failures and
+automatically reboot the system in such cases. It will be assumed
+that the power failure causes a system interrupt.
+
+To perform correct system shutdown, the kernel will register a
+handler of the power-fail IRQ on booting. Being called, the handler
+will run /sbin/reboot using the call_usermodehelper() routine.
+/sbin/reboot will automatically bring the system down in a secure
+way. This feature will be configured in/out from the kernel
+configuration file.
+
+The POST layer of U-Boot will check whether the system runs in
+power-fail mode. If it does, the system will be powered off after
+executing all hardware tests.
+
+2.1.7. Hazardous tests
+
+Some tests may cause system rebooting during their execution. For
+some tests, this will indicate a failure, while for the Watchdog
+test, this means successful operation of the timer.
+
+In order to support such tests, the following scheme will be
+implemented. All the tests that may cause system rebooting will have
+the POST_REBOOT bit flag set in the flag field of the correspondent
+post_test structure. Before starting tests marked with this bit flag,
+the POST layer will store an identification number of the test in a
+location in IMMR. On booting, the POST layer will check the value of
+this variable and if it is set will skip over the tests preceding the
+failed one. On second execution of the failed test, the POST_REBOOT
+bit flag will be set in the flag argument to the test routine. This
+will allow to detect system rebooting on the previous iteration. For
+example, the watchdog timer test may have the following
+declaration/body:
+
+...
+#define POST_WATCHDOG \
+	{
+		"Watchdog timer test", "watchdog", \
+		"  This test checks the watchdog timer.", \
+		POST_RAM | POST_POWERON | POST_REBOOT, \
+		&watchdog_post_test \
+	}
+...
+
+...
+int watchdog_post_test(bd_t *bd, int flags)
+{
+	unsigned long start_time;
+
+	if (flags & POST_REBOOT) {
+		/* Test passed */
+		return 0;
+	} else {
+		/* disable interrupts */
+		disable_interrupts();
+		/* 10-second delay */
+		...
+		/* if we've reached this, the watchdog timer does not work */
+		enable_interrupts();
+		return 1;
+	}
+}
+...
+
+2.2. Hardware-specific details
+
+This project will also develop a set of POST tests for MPC8xx- based
+systems. This section provides technical details of how it will be
+done.
+
+2.2.1. Generic PPC tests
+
+The following generic POST tests will be developed:
+
+  o) CPU test
+
+     This test will check the arithmetic logic unit (ALU) of CPU. The
+     test will take several milliseconds and will run on normal
+     booting.
+
+  o) Cache test
+
+     This test will verify the CPU cache (L1 cache). The test will
+     run on normal booting.
+
+  o) Memory test
+
+     This test will examine RAM and check it for errors. The test
+     will always run on booting. On normal booting, only a limited
+     amount of RAM will be checked. On power-fail booting a fool
+     memory check-up will be performed.
+
+2.2.1.1. CPU test
+
+This test will verify the following ALU instructions:
+
+  o) Condition register istructions
+
+     This group will contain: mtcrf, mfcr, mcrxr, crand, crandc,
+     cror, crorc, crxor, crnand, crnor, creqv, mcrf.
+
+     The mtcrf/mfcr instructions will be tested by loading different
+     values into the condition register (mtcrf), moving its value to
+     a general-purpose register (mfcr) and comparing this value with
+     the expected one. The mcrxr instruction will be tested by
+     loading a fixed value into the XER register (mtspr), moving XER
+     value to the condition register (mcrxr), moving it to a
+     general-purpose register (mfcr) and comparing the value of this
+     register with the expected one. The rest of instructions will be
+     tested by loading a fixed value into the condition register
+     (mtcrf), executing each instruction several times to modify all
+     4-bit condition fields, moving the value of the conditional
+     register to a general-purpose register (mfcr) and comparing it
+     with the expected one.
+
+  o) Integer compare instructions
+
+     This group will contain: cmp, cmpi, cmpl, cmpli.
+
+     To verify these instructions the test will run them with
+     different combinations of operands, read the condition register
+     value and compare it with the expected one. More specifically,
+     the test will contain a pre-built table containing the
+     description of each test case: the instruction, the values of
+     the operands, the condition field to save the result in and the
+     expected result.
+
+  o) Arithmetic instructions
+
+     This group will contain: add, addc, adde, addme, addze, subf,
+     subfc, subfe, subme, subze, mullw, mulhw, mulhwu, divw, divwu,
+     extsb, extsh.
+
+     The test will contain a pre-built table of instructions,
+     operands, expected results and expected states of the condition
+     register. For each table entry, the test will cyclically use
+     different sets of operand registers and result registers. For
+     example, for instructions that use 3 registers on the first
+     iteration r0/r1 will be used as operands and r2 for result. On
+     the second iteration, r1/r2 will be used as operands and r3 as
+     for result and so on. This will enable to verify all
+     general-purpose registers.
+
+  o) Logic instructions
+
+     This group will contain: and, andc, andi, andis, or, orc, ori,
+     oris, xor, xori, xoris, nand, nor, neg, eqv, cntlzw.
+
+     The test scheme will be identical to that from the previous
+     point.
+
+  o) Shift instructions
+
+     This group will contain: slw, srw, sraw, srawi, rlwinm, rlwnm,
+     rlwimi
+
+     The test scheme will be identical to that from the previous
+     point.
+
+  o) Branch instructions
+
+     This group will contain: b, bl, bc.
+
+     The first 2 instructions (b, bl) will be verified by jumping to
+     a fixed address and checking whether control was transfered to
+     that very point. For the bl instruction the value of the link
+     register will be checked as well (using mfspr). To verify the bc
+     instruction various combinations of the BI/BO fields, the CTR
+     and the condition register values will be checked. The list of
+     such combinations will be pre-built and linked in U-Boot at
+     build time.
+
+  o) Load/store instructions
+
+     This group will contain: lbz(x)(u), lhz(x)(u), lha(x)(u),
+     lwz(x)(u), stb(x)(u), sth(x)(u), stw(x)(u).
+
+     All operations will be performed on a 16-byte array. The array
+     will be 4-byte aligned. The base register will point to offset
+     8. The immediate offset (index register) will range in [-8 ...
+     +7]. The test cases will be composed so that they will not cause
+     alignment exceptions. The test will contain a pre-built table
+     describing all test cases. For store instructions, the table
+     entry will contain: the instruction opcode, the value of the
+     index register and the value of the source register. After
+     executing the instruction, the test will verify the contents of
+     the array and the value of the base register (it must change for
+     "store with update" instructions). For load instructions, the
+     table entry will contain: the instruction opcode, the array
+     contents, the value of the index register and the expected value
+     of the destination register. After executing the instruction,
+     the test will verify the value of the destination register and
+     the value of the base register (it must change for "load with
+     update" instructions).
+
+  o) Load/store multiple/string instructions
+
+
+The CPU test will run in RAM in order to allow run-time modification
+of the code to reduce the memory footprint.
+
+2.2.1.2 Special-Purpose Registers Tests
+
+TBD.
+
+2.2.1.3. Cache test
+
+To verify the data cache operation the following test scenarios will
+be used:
+
+  1) Basic test #1
+
+    - turn on the data cache
+    - switch the data cache to write-back or write-through mode
+    - invalidate the data cache
+    - write the negative pattern to a cached area
+    - read the area
+
+    The negative pattern must be read at the last step
+
+  2) Basic test #2
+
+    - turn on the data cache
+    - switch the data cache to write-back or write-through mode
+    - invalidate the data cache
+    - write the zero pattern to a cached area
+    - turn off the data cache
+    - write the negative pattern to the area
+    - turn on the data cache
+    - read the area
+
+    The negative pattern must be read at the last step
+
+  3) Write-through mode test
+
+    - turn on the data cache
+    - switch the data cache to write-through mode
+    - invalidate the data cache
+    - write the zero pattern to a cached area
+    - flush the data cache
+    - write the negative pattern to the area
+    - turn off the data cache
+    - read the area
+
+    The negative pattern must be read at the last step
+
+  4) Write-back mode test
+
+    - turn on the data cache
+    - switch the data cache to write-back mode
+    - invalidate the data cache
+    - write the negative pattern to a cached area
+    - flush the data cache
+    - write the zero pattern to the area
+    - invalidate the data cache
+    - read the area
+
+    The negative pattern must be read at the last step
+
+To verify the instruction cache operation the following test
+scenarios will be used:
+
+  1) Basic test #1
+
+    - turn on the instruction cache
+    - unlock the entire instruction cache
+    - invalidate the instruction cache
+    - lock a branch instruction in the instruction cache
+    - replace the branch instruction with "nop"
+    - jump to the branch instruction
+    - check that the branch instruction was executed
+
+  2) Basic test #2
+
+    - turn on the instruction cache
+    - unlock the entire instruction cache
+    - invalidate the instruction cache
+    - jump to a branch instruction
+    - check that the branch instruction was executed
+    - replace the branch instruction with "nop"
+    - invalidate the instruction cache
+    - jump to the branch instruction
+    - check that the "nop" instruction was executed
+
+The CPU test will run in RAM in order to allow run-time modification
+of the code.
+
+2.2.1.4. Memory test
+
+The memory test will verify RAM using sequential writes and reads
+to/from RAM. Specifically, there will be several test cases that will
+use different patterns to verify RAM. Each test case will first fill
+a region of RAM with one pattern and then read the region back and
+compare its contents with the pattern. The following patterns will be
+used:
+
+ 1) zero pattern (0x00000000)
+ 2) negative pattern (0xffffffff)
+ 3) checkerboard pattern (0x55555555, 0xaaaaaaaa)
+ 4) bit-flip pattern ((1 << (offset % 32)), ~(1 << (offset % 32)))
+ 5) address pattern (offset, ~offset)
+
+Patterns #1, #2 will help to find unstable bits. Patterns #3, #4 will
+be used to detect adherent bits, i.e. bits whose state may randomly
+change if adjacent bits are modified. The last pattern will be used
+to detect far-located errors, i.e. situations when writing to one
+location modifies an area located far from it. Also, usage of the
+last pattern will help to detect memory controller misconfigurations
+when RAM represents a cyclically repeated portion of a smaller size.
+
+Being run in normal mode, the test will verify only small 4Kb regions
+of RAM around each 1Mb boundary. For example, for 64Mb RAM the
+following areas will be verified: 0x00000000-0x00000800,
+0x000ff800-0x00100800, 0x001ff800-0x00200800, ..., 0x03fff800-
+0x04000000. If the test is run in power-fail mode, it will verify the
+whole RAM.
+
+The memory test will run in ROM before relocating U-Boot to RAM in
+order to allow RAM modification without saving its contents.
+
+2.2.2. Common tests
+
+This section describes tests that are not based on any hardware
+peculiarities and use common U-Boot interfaces only. These tests do
+not need any modifications for porting them to another board/CPU.
+
+2.2.2.1. I2C test
+
+For verifying the I2C bus, a full I2C bus scanning will be performed
+using the i2c_probe() routine. If any I2C device is found, the test
+will be considered as passed, otherwise failed. This particular way
+will be used because it provides the most common method of testing.
+For example, using the internal loopback mode of the CPM I2C
+controller for testing would not work on boards where the software
+I2C driver (also known as bit-banged driver) is used.
+
+2.2.2.2. Watchdog timer test
+
+To test the watchdog timer the scheme mentioned above (refer to
+section "Hazardous tests") will be used. Namely, this test will be
+marked with the POST_REBOOT bit flag. On the first iteration, the
+test routine will make a 10-second delay. If the system does not
+reboot during this delay, the watchdog timer is not operational and
+the test fails. If the system reboots, on the second iteration the
+POST_REBOOT bit will be set in the flag argument to the test routine.
+The test routine will check this bit and report a success if it is
+set.
+
+2.2.2.3. RTC test
+
+The RTC test will use the rtc_get()/rtc_set() routines. The following
+features will be verified:
+
+  o) Time uniformity
+
+     This will be verified by reading RTC in polling within a short
+     period of time (5-10 seconds).
+
+  o) Passing month boundaries
+
+     This will be checked by setting RTC to a second before a month
+     boundary and reading it after its passing the boundary. The test
+     will be performed for both leap- and nonleap-years.
+
+2.2.3. MPC8xx peripherals tests
+
+This project will develop a set of tests verifying the peripheral
+units of MPC8xx processors. Namely, the following controllers of the
+MPC8xx communication processor module (CPM) will be tested:
+
+  o) Serial Management Controllers (SMC)
+
+  o) Serial Communication Controllers (SCC)
+
+2.2.3.1. Ethernet tests (SCC)
+
+The internal (local) loopback mode will be used to test SCC. To do
+that the controllers will be configured accordingly and several
+packets will be transmitted. These tests may be enhanced in future to
+use external loopback for testing. That will need appropriate
+reconfiguration of the physical interface chip.
+
+The test routines for the SCC ethernet tests will be located in
+cpu/mpc8xx/scc.c.
+
+2.2.3.2. UART tests (SMC/SCC)
+
+To perform these tests the internal (local) loopback mode will be
+used. The SMC/SCC controllers will be configured to connect the
+transmitter output to the receiver input. After that, several bytes
+will be transmitted. These tests may be enhanced to make to perform
+"external" loopback test using a loopback cable. In this case, the
+test will be executed manually.
+
+The test routine for the SMC/SCC UART tests will be located in
+cpu/mpc8xx/serial.c.
+
+2.2.3.3. USB test
+
+TBD
+
+2.2.3.4. SPI test
+
+TBD
+
+2.3. Design notes
+
+Currently it is unknown how we will power off the board after running
+all power-fail POST tests. This point needs further clarification.

drivers/pci_auto.c

@@ -285,34 +285,22 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 	unsigned int sub_bus = PCI_BUS(dev);
 	unsigned short class;
 	unsigned char prg_iface;
-	int n;
 
 	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
 
 	switch(class)
 	{
 	case PCI_CLASS_BRIDGE_PCI:
+		hose->current_busno++;
 		pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_io);
 
-		DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n",
-			PCI_DEV(dev));
+		DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
+		pciauto_prescan_setup_bridge(hose, dev, sub_bus);
+		
+		pci_hose_scan_bus(hose, hose->current_busno);
 
-		/* HJF: Make sure two bridges on the same bus
-		 * won't get the same bus number
-		 */
-		pciauto_prescan_setup_bridge(hose, dev,
-				max(sub_bus, hose->current_busno));
-
-		n = pci_hose_scan_bus(hose, hose->current_busno+1 /*PCI_BUS(dev)+1*/);
-		sub_bus = max(sub_bus, n);
-		sub_bus = max(sub_bus, hose->current_busno);
-
-		DEBUGF("PCI Autoconfig: Got %d from pci_hose_scan_bus\n",
-			sub_bus);
-
-		pciauto_postscan_setup_bridge(hose, dev,
-				max(sub_bus, hose->current_busno));
-		hose->current_busno++;
+		pciauto_postscan_setup_bridge(hose, dev, sub_bus);
+		sub_bus = hose->current_busno;
 		break;
 
 	case PCI_CLASS_STORAGE_IDE:

include/asm-arm/arch-pxa/pxa-regs.h

@@ -10,6 +10,8 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef PXA_REGS_H
+#define PXA_REGS_H 1
 
 /* FIXME hack so that SA-1111.h will work [cb] */
 
@@ -425,6 +427,38 @@ typedef void            (*ExcpHndlr) (void) ;
 #define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
 #define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
 
+/* ----- Control register bits ---------------------------------------- */
+
+#define ICR_START	0x1		/* start bit */
+#define ICR_STOP	0x2		/* stop bit */
+#define ICR_ACKNAK	0x4		/* send ACK(0) or NAK(1) */
+#define ICR_TB		0x8 		/* transfer byte bit */
+#define ICR_MA		0x10		/* master abort */
+#define ICR_SCLE	0x20		/* master clock enable */
+#define ICR_IUE		0x40		/* unit enable */
+#define ICR_GCD		0x80		/* general call disable */
+#define ICR_ITEIE	0x100		/* enable tx interrupts */
+#define ICR_IRFIE	0x200		/* enable rx interrupts */
+#define ICR_BEIE	0x400		/* enable bus error ints */
+#define ICR_SSDIE	0x800		/* slave STOP detected int enable */
+#define ICR_ALDIE	0x1000  	/* enable arbitration interrupt */
+#define ICR_SADIE	0x2000		/* slave address detected int enable */
+#define ICR_UR		0x4000		/* unit reset */
+
+/* ----- Status register bits ----------------------------------------- */
+
+#define ISR_RWM         0x1		/* read/write mode */
+#define ISR_ACKNAK      0x2		/* ack/nak status */
+#define ISR_UB          0x4		/* unit busy */
+#define ISR_IBB         0x8		/* bus busy */
+#define ISR_SSD         0x10		/* slave stop detected */
+#define ISR_ALD         0x20		/* arbitration loss detected */
+#define ISR_ITE         0x40            /* tx buffer empty */
+#define ISR_IRF         0x80            /* rx buffer full */
+#define ISR_GCAD        0x100		/* general call address detected */
+#define ISR_SAD         0x200		/* slave address detected */
+#define ISR_BED         0x400           /* bus error no ACK/NAK */
+
 
 /*
  * Serial Audio Controller
@@ -1128,6 +1162,6 @@ typedef void            (*ExcpHndlr) (void) ;
 #define MCIO1_OFFSET    0x3C
 #define MDMRS_OFFSET    0x40
 
-
+#endif /* PXA_REGS_H */
 
 

include/asm-arm/arch-xscale/pxa-regs.h

@@ -1,15 +1,23 @@
 /*
  *  linux/include/asm-arm/arch-pxa/pxa-regs.h
- *
+ *  
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
  *  Copyright:	MontaVista Software Inc.
- *
+ *  
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de
+ *   Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions.
+ *   Added include for hardware.h (for __REG definition)
  */
+#ifndef _PXA_REGS_H_
+#define _PXA_REGS_H_
 
+#include "bitfield.h"
+#include "hardware.h"
 
 /* FIXME hack so that SA-1111.h will work [cb] */
 
@@ -22,13 +30,6 @@ typedef void            *Address ;
 typedef void            (*ExcpHndlr) (void) ;
 #endif
 
-#ifndef __ASSEMBLY__
-#define io_p2v(PhAdd)    (PhAdd)
-#define __REG(x) (*((volatile u32 *)io_p2v(x)))
-#else
-#define __REG(x) (x)
-#endif
-
 /*
  * PXA Chip selects
  */
@@ -369,7 +370,7 @@ typedef void            (*ExcpHndlr) (void) ;
 #define LSR_OE		(1 << 1)	/* Overrun Error */
 #define LSR_DR		(1 << 0)	/* Data Ready */
 
-#define MCR_LOOP	(1 << 4)	*/
+#define MCR_LOOP	(1 << 4)	*/ 
 #define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
 #define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
 #define MCR_RTS		(1 << 1)	/* Request to Send */
@@ -414,7 +415,6 @@ typedef void            (*ExcpHndlr) (void) ;
                 IrSR_RCVEIR_UART_MODE | \
                 IrSR_XMITIR_IR_MODE)
 
-
 /*
  * I2C registers
  */
@@ -425,6 +425,38 @@ typedef void            (*ExcpHndlr) (void) ;
 #define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
 #define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
 
+/* ----- Control register bits ---------------------------------------- */
+
+#define ICR_START	0x1		/* start bit */
+#define ICR_STOP	0x2		/* stop bit */
+#define ICR_ACKNAK	0x4		/* send ACK(0) or NAK(1) */
+#define ICR_TB		0x8 		/* transfer byte bit */
+#define ICR_MA		0x10		/* master abort */
+#define ICR_SCLE	0x20		/* master clock enable */
+#define ICR_IUE		0x40		/* unit enable */
+#define ICR_GCD		0x80		/* general call disable */
+#define ICR_ITEIE	0x100		/* enable tx interrupts */
+#define ICR_IRFIE	0x200		/* enable rx interrupts */
+#define ICR_BEIE	0x400		/* enable bus error ints */
+#define ICR_SSDIE	0x800		/* slave STOP detected int enable */
+#define ICR_ALDIE	0x1000  	/* enable arbitration interrupt */
+#define ICR_SADIE	0x2000		/* slave address detected int enable */
+#define ICR_UR		0x4000		/* unit reset */
+#define ICR_FM		0x8000		/* Fast Mode */
+
+/* ----- Status register bits ----------------------------------------- */
+
+#define ISR_RWM         0x1		/* read/write mode */
+#define ISR_ACKNAK      0x2		/* ack/nak status */
+#define ISR_UB          0x4		/* unit busy */
+#define ISR_IBB         0x8		/* bus busy */	
+#define ISR_SSD         0x10		/* slave stop detected */
+#define ISR_ALD         0x20		/* arbitration loss detected */
+#define ISR_ITE         0x40            /* tx buffer empty */
+#define ISR_IRF         0x80            /* rx buffer full */
+#define ISR_GCAD        0x100		/* general call address detected */
+#define ISR_SAD         0x200		/* slave address detected */
+#define ISR_BED         0x400           /* bus error no ACK/NAK */
 
 /*
  * Serial Audio Controller
@@ -524,24 +556,92 @@ typedef void            (*ExcpHndlr) (void) ;
 /*
  * USB Device Controller
  */
+#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
 
 #define UDCCR		__REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
 #define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
 #define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
 #define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
 #define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
 #define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
 #define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
 #define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
 #define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
 #define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
 #define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
 #define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
@@ -566,11 +666,51 @@ typedef void            (*ExcpHndlr) (void) ;
 #define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
 #define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
 #define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
 #define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
 #define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
 #define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrup request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrup request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
+
 #define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
 
+#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+
 
 /*
  * Fast Infrared Communication Port
@@ -917,6 +1057,22 @@ typedef void            (*ExcpHndlr) (void) ;
 #define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
 #define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
 
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
 
 /*
  * SSP Serial Port Registers
@@ -1040,19 +1196,105 @@ typedef void            (*ExcpHndlr) (void) ;
 #define LCCR0_BM	(1 << 20) 	/* Branch mask */
 #define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
 
+#define LCCR1_PPL       Fld (10, 0)      /* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)            /* Display Width [1..800 pix.]  */ \
+                        (((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW       Fld (6, 10)     /* Horizontal Synchronization     */
+#define LCCR1_HorSnchWdth(Tpix)         /* Horizontal Synchronization     */ \
+                                        /* pulse Width [1..64 Tpix]       */ \
+                        (((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW       Fld (8, 16)     /* End-of-Line pixel clock Wait    */
+                                        /* count - 1 [Tpix]                */
+#define LCCR1_EndLnDel(Tpix)            /*  End-of-Line Delay              */ \
+                                        /*  [1..256 Tpix]                  */ \
+                        (((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW       Fld (8, 24)     /* Beginning-of-Line pixel clock   */
+                                        /* Wait count - 1 [Tpix]           */
+#define LCCR1_BegLnDel(Tpix)            /*  Beginning-of-Line Delay        */ \
+                                        /*  [1..256 Tpix]                  */ \
+                        (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+
+#define LCCR2_LPP       Fld (10, 0)     /* Line Per Panel - 1              */
+#define LCCR2_DisHght(Line)             /*  Display Height [1..1024 lines] */ \
+                        (((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW       Fld (6, 10)     /* Vertical Synchronization pulse  */
+                                        /* Width - 1 [Tln] (L_FCLK)        */
+#define LCCR2_VrtSnchWdth(Tln)          /*  Vertical Synchronization pulse */ \
+                                        /*  Width [1..64 Tln]              */ \
+                        (((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW       Fld (8, 16)     /* End-of-Frame line clock Wait    */
+                                        /* count [Tln]                     */
+#define LCCR2_EndFrmDel(Tln)            /*  End-of-Frame Delay             */ \
+                                        /*  [0..255 Tln]                   */ \
+                        ((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW       Fld (8, 24)     /* Beginning-of-Frame line clock   */
+                                        /* Wait count [Tln]                */
+#define LCCR2_BegFrmDel(Tln)            /*  Beginning-of-Frame Delay       */ \
+                                        /*  [0..255 Tln]                   */ \
+                        ((Tln) << FShft (LCCR2_BFW))
+
+#if 0
 #define LCCR3_PCD	(0xff)		/* Pixel clock divisor */
 #define LCCR3_ACB	(0xff << 8)	/* AC Bias pin frequency */
 #define LCCR3_ACB_S	8
+#endif
+
 #define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
 #define LCCR3_API_S	16
 #define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
 #define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
 #define LCCR3_PCP	(1 << 22)	/* pixel clock polarity */
 #define LCCR3_OEP	(1 << 23)	/* output enable polarity */
+#if 0
 #define LCCR3_BPP	(7 << 24)	/* bits per pixel */
 #define LCCR3_BPP_S	24
+#endif
 #define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
 
+
+#define LCCR3_PCD       Fld (8, 0)      /* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)            /* Pixel Clock Divisor */ \
+                        (((Div) << FShft (LCCR3_PCD)))
+
+
+#define LCCR3_BPP       Fld (3, 24)     /* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)                  /* Bit Per Pixel */ \
+                        (((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB       Fld (8, 8)      /* AC Bias */
+#define LCCR3_Acb(Acb)                  /* BAC Bias */ \
+                        (((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH  (LCCR3_HSP*0)   /*  Horizontal Synchronization     */
+                                        /*  pulse active High              */
+#define LCCR3_HorSnchL  (LCCR3_HSP*1)   /*  Horizontal Synchronization     */
+
+#define LCCR3_VrtSnchH  (LCCR3_VSP*0)   /*  Vertical Synchronization pulse */
+                                        /*  active High                    */
+#define LCCR3_VrtSnchL  (LCCR3_VSP*1)   /*  Vertical Synchronization pulse */
+                                        /*  active Low                     */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
 #define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
 #define LCSR_SOF	(1 << 1)	/* Start of frame */
 #define LCSR_BER	(1 << 2)	/* Bus error */
@@ -1071,45 +1313,7 @@ typedef void            (*ExcpHndlr) (void) ;
  * Memory controller
  */
 
-#define MEMC_BASE __REG(0x48000000)  /* Base of Memoriy Controller */
-#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
-#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
-#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
-#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
-#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
-#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-#define MDCNFG_DE0      0x00000001
-#define MDCNFG_DE1      0x00000002
-#define MDCNFG_DE2      0x00010000
-#define MDCNFG_DE3      0x00020000
-#define MDCNFG_DWID0    0x00000004
-
-#define MDREFR_E0PIN    0x00001000
-#define MDREFR_K0RUN	0x00002000
-#define MDREFR_K0DB2	0x00004000
-#define MDREFR_E1PIN    0x00008000
-#define MDREFR_K1RUN	0x00010000
-#define MDREFR_K1DB2	0x00020000
-#define MDREFR_K2RUN	0x00040000
-#define MDREFR_K2DB2	0x00080000
-#define MDREFR_APD	0x00100000
-#define MDREFR_SLFRSH	0x00400000
-#define MDREFR_K0FREE	0x00800000
-#define MDREFR_K1FREE	0x01000000
-#define MDREFR_K2FREE	0x02000000
-
+#define MEMC_BASE	__REG(0x48000000)  /* Base of Memory Controller */
 #define MDCNFG_OFFSET   0x0
 #define MDREFR_OFFSET   0x4
 #define MSC0_OFFSET     0x8
@@ -1127,7 +1331,44 @@ typedef void            (*ExcpHndlr) (void) ;
 #define MCIO0_OFFSET    0x38
 #define MCIO1_OFFSET    0x3C
 #define MDMRS_OFFSET    0x40
+	
+#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDCNFG_DE0	0x00000001
+#define MDCNFG_DE1	0x00000002
+#define MDCNFG_DE2	0x00010000
+#define MDCNFG_DE3	0x00020000
+#define MDCNFG_DWID0	0x00000004
+	
+#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
 
 
-
-
+#endif

include/asm-arm/proc-armv/ptrace.h

@@ -61,6 +61,8 @@ struct pt_regs {
 #define ARM_r0		uregs[0]
 #define ARM_ORIG_r0	uregs[17]
 
+#define instruction_pointer(regs)	((regs)->ARM_ip)
+
 #ifdef __KERNEL__
 
 #define user_mode(regs)	\

include/configs/MPC8260ADS.h

@@ -99,8 +99,17 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
+#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
+#define CONFIG_SPD_ADDR         0x50
+#endif
 
+#ifndef CONFIG_SDRAM_PBI
+#define CONFIG_SDRAM_PBI        1 /* By default, use page-based interleaving */
+#endif
+
+#ifndef CONFIG_8260_CLKIN
 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
+#endif
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \

include/configs/MPC8266ADS.h

@@ -0,0 +1,411 @@
+/*
+ * (C) Copyright 2001
+ * Stuart Hughes <stuarth@lineo.com>
+ * This file is based on similar values for other boards found in other
+ * U-Boot config files, and some that I found in the mpc8260ads manual.
+ *
+ * Note: my board is a PILOT rev.
+ * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Config header file for a MPC8260ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
+#define CONFIG_MPC8260ADS	1	/* ...on motorola ads board */
+
+#define CONFIG_BOARD_PRE_INIT	1	/* Call board_pre_init	*/
+
+/* allow serial and ethaddr to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere (for example, on the cogent platform, there are serial
+ * ports on the motherboard which are used for the serial console - see
+ * cogent/cma101/serial.[ch]).
+ */
+#undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
+#define CONFIG_CONS_ON_SCC		/* define if console on SCC */
+#undef	CONFIG_CONS_NONE		/* define if console on something else */
+#define CONFIG_CONS_INDEX	1	/* which serial channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
+#define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
+#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
+#define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
+
+#if (CONFIG_ETHER_INDEX == 2)
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers (see 28-13)
+ * - Half duplex
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		0
+
+#endif	/* CONFIG_ETHER_INDEX */
+
+/* other options */
+#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+
+/*-----------------------------------------------------------------------
+ * Definitions for Serial Presence Detect EEPROM address
+ * (to get SDRAM settings)
+ */
+#define SPD_EEPROM_ADDRESS      0x50
+
+
+#define CONFIG_8260_CLKIN	66666666	/* in Hz */
+#define CONFIG_BAUDRATE		115200
+
+
+#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
+				 CFG_CMD_BEDBUG | \
+				 CFG_CMD_BSP	| \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_DOC	| \
+				 CFG_CMD_DTT	| \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_ELF    | \
+				 CFG_CMD_FDC	| \
+				 CFG_CMD_FDOS	| \
+				 CFG_CMD_HWFLOW	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_KGDB	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_PCI	| \
+				 CFG_CMD_PCMCIA | \
+				 CFG_CMD_SCSI	| \
+				 CFG_CMD_SPI	| \
+				 CFG_CMD_VFD	| \
+				 CFG_CMD_USB	) )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CONFIG_BOOTCOMMAND	"bootm 100000"	/* autoboot command */
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
+#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
+#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
+#endif
+
+#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16			/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+					/* for versions < 2.4.5-pre5	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CFG_FLASH_BASE		0xff800000
+#define FLASH_BASE		0xff800000
+#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
+#define CFG_FLASH_SIZE		8
+#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
+#define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
+
+#undef	CFG_FLASH_CHECKSUM
+
+/* this is stuff came out of the Motorola docs */
+/* Only change this if you also change the Hardware configuration Word */
+#define CFG_DEFAULT_IMMR	0x0F010000
+
+/*
+#define CFG_IMMR		0x04700000
+#define CFG_BCSR		0x04500000
+*/
+
+/* Set IMMR to 0xF0000000 or above to boot Linux  */
+#define CFG_IMMR		0xF0000000
+#define CFG_BCSR		0x04500000
+
+/* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes
+ */
+/*#define CONFIG_VERY_BIG_RAM	1*/
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?  This will normally auto-configure via the SPD.
+*/
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 16
+
+#define SDRAM_SPD_ADDR 0x50
+
+
+/*-----------------------------------------------------------------------
+ * BR2,BR3 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR2,OR3 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 2,3 - SDRAM DIMM
+ */
+
+/* The BR2 is configured as follows:
+ *
+ *     - Base address of 0x00000000
+ *     - 64 bit port size (60x bus only)
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - SDRAM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR2_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+#define CFG_BR3_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+/* With a 64 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 64 MB
+ *     - 4 internal banks per device
+ *     - Row start address bit is A8 with PSDMR[PBI] = 0
+ *     - 12 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM_SIZE == 64)
+#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM_SIZE)	|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A8		|\
+			 ORxS_NUMR_12)
+#elif (CFG_SDRAM_SIZE == 16)
+#define CFG_OR2_PRELIM	(0xFF000CA0)
+#else
+#error "INVALID SDRAM CONFIGURATION"
+#endif
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ *     Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+
+#if (CFG_SDRAM_SIZE == 64)
+/* With a 64 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Bank Based Interleaving,
+ *     - Refresh Enable,
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *	 (A6 on A15, and so on),
+ *     - use address pins A14-A16 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *	 is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *	 2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - CAS Latency is 2.
+ */
+#define CFG_PSDMR	(PSDMR_RFEN	      |\
+			 PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A14_A16   |\
+			 PSDMR_SDA10_PBI0_A9  |\
+			 PSDMR_RFRC_7_CLK     |\
+			 PSDMR_PRETOACT_3W    |\
+			 PSDMR_ACTTORW_2W     |\
+			 PSDMR_LDOTOPRE_1C    |\
+			 PSDMR_WRC_1C	      |\
+			 PSDMR_CL_2)
+#elif (CFG_SDRAM_SIZE == 16)
+/* With a 16 MB DIMM, the PSDMR is configured as follows:
+ *
+ *   configuration parameters found in Motorola documentation
+ */
+#define CFG_PSDMR	(0x016EB452)
+#else
+#error "INVALID SDRAM CONFIGURATION"
+#endif
+
+
+#define RS232EN_1		0x02000002
+#define RS232EN_2		0x01000001
+#define FETHIEN			0x08000008
+#define FETH_RST		0x04000004
+
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+
+/* 0x0EA28205 */
+/*#define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
+			    ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 )    |\
+			    ( HRCW_BMS | HRCW_APPC10 )			    |\
+			    ( HRCW_MODCK_H0101 )			     \
+			)
+*/
+
+/* This value should actually be situated in the first 256 bytes of the FLASH
+	which on the standard MPC8266ADS board is at address 0xFF800000
+	The linker script places it at 0xFFF00000 instead.
+
+	It still works, however, as long as the ADS board jumper JP3 is set to 
+	position 2-3 so the board is using the BCSR as Hardware Configuration Word 
+
+	If you want to use the one defined here instead, ust copy the first 256 bytes from 
+	0xfff00000 to 0xff800000  (for 8MB flash) 
+
+	- Rune
+
+	*/
+#define CFG_HRCW_MASTER 0x0cb23645
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM	0x02	/* Software reboot	     */
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#ifndef CFG_RAMBOOT
+#  define CFG_ENV_IS_IN_FLASH	1
+#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
+#    define CFG_ENV_SECT_SIZE	0x40000
+#else
+#  define CFG_ENV_IS_IN_NVRAM	1
+#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#  define CFG_ENV_SIZE		0x200
+#endif /* CFG_RAMBOOT */
+
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
+
+#define CFG_HID2		0
+
+#define CFG_SYPCR		0xFFFFFFC3
+#define CFG_BCR			0x100C0000
+#define CFG_SIUMCR		0x0A200000
+#define CFG_SCCR		0x00000000
+#define CFG_BR0_PRELIM		0xFF801801
+#define CFG_OR0_PRELIM		0xFF800836
+#define CFG_BR1_PRELIM		0x04501801
+#define CFG_OR1_PRELIM		0xFFFF8010
+
+#define CFG_RMR			0
+#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CFG_RCCR		0
+/*#define CFG_PSDMR		0x016EB452*/
+#define CFG_MPTPR		0x00001900
+#define CFG_PSRT		0x00000021
+
+#define CFG_RESET_ADDRESS	0x04400000
+
+#endif /* __CONFIG_H */

include/configs/TOP860.h

@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * Configuation settings for the TOP860 board.
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * TOP860 is a simple module:
+ * 16-bit wide FLASH on CS0	(2MB or more)
+ * 32-bit wide DRAM on CS2 (either 4MB or 16MB)
+ * FEC with Am79C874 100-Base-T and Fiber Optic
+ * Ports available, but we choose SMC1 for Console
+ * 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set
+ * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock
+ *
+ * This config has been copied from MBX.h / MBX860T.h
+ */
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+/*-----------------------------------------------------------------------
+ * CPU and BOARD type
+ */
+#define CONFIG_MPC860	1	/* This is a MPC860 CPU		*/
+#define CONFIG_MPC860T	1	/* even better... an FEC!	*/
+#define CONFIG_TOP860	1	/* ...on a TOP860 module	*/
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define	CONFIG_IDENT_STRING " EMK TOP860"
+
+/*-----------------------------------------------------------------------
+ * CLOCK settings
+ */
+#define	CONFIG_SYSCLK	49152000
+#define	CFG_XTAL		32768
+#define	CONFIG_EBDF		1
+#define	CONFIG_COM		3
+#define	CONFIG_RTC_MPC8xx
+
+/*-----------------------------------------------------------------------
+ * Physical memory map as defined by EMK
+ */
+#define CFG_IMMR		0xFFF00000	/* Internal Memory Mapped Register */
+#define	CFG_FLASH_BASE	0x80000000	/* FLASH in final mapping */
+#define	CFG_DRAM_BASE	0x00000000	/* DRAM in final mapping */
+#define	CFG_FLASH_MAX	0x00400000	/* max FLASH to expect */
+#define	CFG_DRAM_MAX	0x01000000	/* max DRAM to expect */
+
+/*-----------------------------------------------------------------------
+ * derived values
+ */
+#define	CFG_MF			(CONFIG_SYSCLK/CFG_XTAL)
+#define	CFG_CPUCLOCK	CONFIG_SYSCLK
+#define	CFG_BRGCLOCK	CONFIG_SYSCLK
+#define	CFG_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_8xx_GCLK_FREQ	CONFIG_SYSCLK
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define	CFG_FLASH_CFI
+
+/*-----------------------------------------------------------------------
+ * Command interpreter
+ */
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#define CONFIG_BAUDRATE		9600
+
+/*
+ * Allow partial commands to be matched to uniqueness.
+ */
+#define CFG_MATCH_PARTIAL_CMD
+
+/*
+ * List of available monitor commands.  Use the system default list
+ * plus add some of the "non-standard" commands back in.
+ * See ./cmd_confdefs.h
+ */
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+								CFG_CMD_ASKENV	| \
+								CFG_CMD_DHCP	| \
+								CFG_CMD_I2C		| \
+								CFG_CMD_EEPROM	| \
+								CFG_CMD_REGINFO	| \
+								CFG_CMD_IMMAP	| \
+								CFG_CMD_ELF		| \
+								CFG_CMD_DATE	| \
+								CFG_CMD_MII 	| \
+								CFG_CMD_BEDBUG	\
+						      )
+
+#define	CONFIG_AUTOSCRIPT		1
+#define	CFG_LOADS_BAUD_CHANGE	1
+#undef	CONFIG_LOADS_ECHO			/* NO echo on for serial download	*/
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+
+#undef	CFG_HUSH_PARSER			/* Hush parse for U-Boot	*/
+
+#ifdef	CFG_HUSH_PARSER
+ #define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+ #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+/*-----------------------------------------------------------------------
+ * Memory Test Command
+ */
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+/*-----------------------------------------------------------------------
+ * Environment handler
+ * only the first 6k in EEPROM are available for user. Of that we use 256b
+ */
+#define	CONFIG_SOFT_I2C
+#define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
+#define CFG_ENV_OFFSET		0x1000
+#define CFG_ENV_SIZE		0x0700
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_FACT_OFFSET		0x1800
+#define CFG_FACT_SIZE		0x0800
+#define CFG_I2C_FACT_ADDR	0x57
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_SIZE 0x2000
+#define	CFG_I2C_SPEED	100000
+#define	CFG_I2C_SLAVE	0xFE
+#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS 12
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_MISC_INIT_R
+
+#if defined (CONFIG_SOFT_I2C)
+#define	SDA	0x00010
+#define	SCL	0x00020
+#define DIR immr->im_cpm.cp_pbdir
+#define DAT	immr->im_cpm.cp_pbdat
+#define PAR	immr->im_cpm.cp_pbpar
+#define	ODR	immr->im_cpm.cp_pbodr
+#define	I2C_INIT	{PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}
+#define	I2C_READ	((DAT&SDA)?1:0)
+#define	I2C_SDA(x)	{if(x)DAT|=SDA;else DAT&=~SDA;}
+#define	I2C_SCL(x)	{if(x)DAT|=SCL;else DAT&=~SCL;}
+#define	I2C_DELAY	{udelay(5);}
+#define	I2C_ACTIVE	 {DIR|=SDA;}
+#define	I2C_TRISTATE {DIR&=~SDA;}
+#endif
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*-----------------------------------------------------------------------
+ * defines we need to get FEC running
+ */
+#define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
+#define CONFIG_FEC_ENET 	1	/* Ethernet only via FEC	*/
+#define	FEC_ENET			1	/* eth.c needs it that way... */
+#define CFG_DISCOVER_PHY	1
+#define CONFIG_MII			1
+#define CONFIG_PHY_ADDR		31
+
+/*-----------------------------------------------------------------------
+ * adresses
+ */
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x80000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
+#define CFG_INIT_VPD_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE)
+#define CFG_INIT_SP_OFFSET	(CFG_INIT_VPD_OFFSET-8)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/*-----------------------------------------------------------------------
+ * Debug Enable Register
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0					/* used in start.S */
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * set up PLPRCR (PLL, Low-Power, and Reset Control Register)
+ *	12	MF		calculated	Multiplication factor
+ *	4	0		0000
+ *	1	SPLSS	0			System PLL lock status sticky
+ *	1	TEXPS	1			Timer expired status
+ *	1	0		0
+ *	1	TMIST	0			Timers interrupt status
+ *	1	0		0
+ *	1	CSRC	0			Clock source (0=DFNH, 1=DFNL)
+ *	2	LPM		00			Low-power modes
+ *	1	CSR		0			Checkstop reset enable
+ *	1	LOLRE	0			Loss-of-lock reset enable
+ *	1	FIOPD	0			Force I/O pull down
+ *	5	0		00000			
+ */
+#define CFG_PLPRCR	(PLPRCR_TEXPS | ((CFG_MF-1)<<20))
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * set up SYPCR:
+ *	16	SWTC	0xffff		Software watchdog timer count
+ *	8	BMT		0xff 		Bus monitor timing
+ *	1	BME		1			Bus monitor enable
+ *	3	0		000
+ *	1	SWF		1			Software watchdog freeze
+ *	1	SWE		0/1			Software watchdog enable
+ *	1	SWRI	0/1			Software watchdog reset/interrupt select (1=HRESET)
+ *	1	SWP		0/1			Software watchdog prescale (1=/2048)
+ */
+#if defined (CONFIG_WATCHDOG)
+ #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 		 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+ #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * set up SIUMCR
+ *	1	EARB	0			External arbitration
+ *	3	EARP	000			External arbitration request priority
+ *	4	0		0000
+ *	1	DSHW	0			Data show cycles
+ *	2	DBGC	00			Debug pin configuration
+ *	2	DBPC	00			Debug port pins configuration
+ *	1	0		0
+ *	1	FRC		0			FRZ pin configuration
+ *	1	DLK		0			Debug register lock
+ *	1	OPAR	0			Odd parity
+ *	1	PNCS	0			Parity enable for non memory controller regions
+ *	1	DPC		0			Data parity pins configuration
+ *	1	MPRE	0			Multiprocessor reservation enable
+ *	2	MLRC	11			Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)
+ *	1	AEME	0			Async external master enable
+ *	1	SEME	0			Sync external master enable
+ *	1	BSC		0			Byte strobe configuration
+ *	1	GB5E	0			GPL_B5 enable
+ *	1	B2DD	0			Bank 2 double drive			
+ *	1	B3DD	0			Bank 3 double drive			
+ *	4	0		0000
+ */
+#define CFG_SIUMCR	(SIUMCR_MLRC11)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * set up SCCR (System Clock and Reset Control Register)
+ *	1	0		0
+ *	2	COM		11			Clock output module (00=full, 01=half, 11=off)
+ *	3	0		000
+ *	1	TBS		1			Timebase source (0=OSCCLK, 1=GCLK2)
+ *	1	RTDIV	0			Real-time clock divide (0=/4, 1=/512)
+ *	1	RTSEL	0			Real-time clock select (0=OSCM, 1=EXTCLK)
+ *	1	CRQEN	0			CPM request enable
+ *	1	PRQEN	0			Power management request enable
+ *	2	0		00
+ *	2	EBDF	xx			External bus division factor
+ *	2	0		00
+ *	2	DFSYNC	00			Division factor for SYNCLK
+ *	2	DFBRG	00			Division factor for BRGCLK
+ *	3	DFNL	000			Division factor low frequency
+ *	3	DFNH	000			Division factor high frequency
+ *	5	0		00000
+ */
+#define SCCR_MASK	0
+#if CONFIG_EBDF
+ #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
+#else
+ #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS)
+#endif
+
+/*-----------------------------------------------------------------------
+ * Chip Select 0 - FLASH
+ *-----------------------------------------------------------------------
+ * Preliminary Values
+ */
+/* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
+#define CFG_OR0_PRELIM	(-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | BR_PS_16 | BR_V )
+
+/*-----------------------------------------------------------------------
+ * misc
+ *-----------------------------------------------------------------------
+ *
+ */
+/*
+ * Set the autoboot delay in seconds.  A delay of -1 disables autoboot
+ */
+#define CONFIG_BOOTDELAY				5
+
+/*
+ * Pass the clock frequency to the Linux kernel in units of MHz
+ */
+#define	CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_PREBOOT		\
+	"echo;echo"
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND	\
+	"bootp;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+	"bootm"
+
+/*
+ * BOOTP options
+ */
+#undef	CONFIG_BOOTP_MASK
+#define CONFIG_BOOTP_MASK				( CONFIG_BOOTP_DEFAULT		| \
+									  	  CONFIG_BOOTP_BOOTFILESIZE   \
+										)
+										
+
+/*
+ * Set default IP stuff just to get bootstrap entries into the
+ * environment so that we can autoscript the full default environment.
+ */
+#define CONFIG_ETHADDR					9a:52:63:15:85:25
+#define CONFIG_SERVERIP					10.0.4.200
+#define CONFIG_IPADDR					10.0.4.111
+
+/*-----------------------------------------------------------------------
+ * Defaults for Autoscript
+ */
+#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define	CFG_TFTP_LOADADDR	0x00100000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+
+#endif	/* __CONFIG_H */

include/configs/W7OLMC.h

@@ -81,7 +81,7 @@
 #define CONFIG_HW_WATCHDOG			/* HW Watchdog, board specific	*/
 
 #define	CONFIG_SPD_EEPROM			/* SPD EEPROM for SDRAM param.	*/
-
+#define CONFIG_SPDDRAM_SILENT			/* No output if spd fails	*/
 /*
  * Miscellaneous configurable options
  */

include/configs/W7OLMG.h

@@ -87,7 +87,7 @@
 #define CONFIG_HW_WATCHDOG			/* HW Watchdog, board specific	*/
 
 #define	CONFIG_SPD_EEPROM			/* SPD EEPROM for SDRAM param.	*/
-
+#define CONFIG_SPDDRAM_SILENT			/* No output if spd fails	*/
 /*
  * Miscellaneous configurable options
  */

include/configs/innokom.h

@@ -0,0 +1,444 @@
+/*
+ * (C) Copyright 2000, 2001, 2002
+ * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
+ *
+ * Configuration for the Auerswald Innokom CPU board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * include/configs/innokom.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DEBUG 1
+
+/*
+ * If we are developing, we might want to start U-Boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA250 		1	/* This is an PXA250 CPU            */
+#define CONFIG_INNOKOM		1	/* on an Auerswald Innokom board    */
+
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
+					/* for timer/console/ethernet       */
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_FFUART		1	/* we use FFUART on CSB226 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		19200
+
+#define CONFIG_COMMANDS		((CONFIG_CMD_DFL | CFG_CMD_I2C | CFG_CMD_EEPROM) & ~CFG_CMD_NET)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)   */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+/* #define CONFIG_BOOTARGS	"root=/dev/nfs ip=bootp console=ttyS0,19200" */
+#define CONFIG_BOOTARGS		"console=ttyS0,19200"
+#define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.1.56
+#define CONFIG_SERVERIP		192.168.1.2
+#define CONFIG_BOOTCOMMAND	"bootm 0x40000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_CMDLINE_TAG	1
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	19200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+
+/*
+ * Size of malloc() pool; this lives below the uppermost 128 KiB which are
+ * used for the RAM copy of the uboot code
+ */
+/* #define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024) */
+#define CFG_MALLOC_LEN		(128*1024)
+
+#define CFG_LONGHELP				/* undef to save memory         */
+#define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt       */
+#define CFG_CBSIZE		128		/* Console I/O Buffer Size      */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START	0xa0400000      /* memtest works on     */
+#define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
+
+#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR           0xa7fe0000      /* default load address */
+						/* RS: where is this documented? */
+						/* RS: is this where U-Boot is  */
+						/* RS: relocated to in RAM?      */
+
+#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+						/* RS: the oscillator is actually 3680130?? */
+
+#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+						/* 0101000001 */
+						/*      ^^^^^ Memory Speed 99.53 MHz         */
+						/*    ^^      Run Mode Speed = 2x Mem Speed  */
+						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
+
+#define CFG_MONITOR_LEN		0x20000		/* 128 KiB */
+
+                                                /* valid baudrates */
+#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * I2C bus
+ */
+#define CONFIG_HARD_I2C 1
+#define CFG_I2C_SPEED 50000
+#define CFG_I2C_SLAVE 0xfe
+
+#define CFG_ENV_IS_IN_EEPROM 		1
+
+#define CFG_ENV_OFFSET			0x00	/* environment starts here  */
+#define CFG_ENV_SIZE			1024	/* 1 KiB                    */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* A0 = 0 (hardwired)       */
+#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets       */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start   */
+#define CFG_I2C_EEPROM_ADDR_LEN		2	/* length of address        */
+#define CFG_EEPROM_SIZE			4096	/* size in bytes            */
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#ifdef  CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM   */
+#define PHYS_SDRAM_1		0xa0000000	/* SDRAM Bank #1            */
+#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB                    */
+
+#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
+#define PHYS_FLASH_SIZE		0x01000000	/* 16 MB                    */
+
+#define CFG_DRAM_BASE		0xa0000000	/* RAM starts here          */
+#define CFG_DRAM_SIZE		0x04000000
+
+#define CFG_FLASH_BASE          PHYS_FLASH_1
+
+/*
+ * GPIO settings;
+ */
+
+/* GP15 == nCS1      is 1
+ * GP24 == SFRM      is 1
+ * GP25 == TXD       is 1
+ * GP33 == nCS5      is 1
+ * GP39 == FFTXD     is 1
+ * GP41 == RTS       is 1
+ * GP47 == TXD       is 1
+ * GP49 == nPWE      is 1
+ * GP62 == LED_B     is 1
+ * GP63 == TDM_OE    is 1
+ * GP78 == nCS2      is 1
+ * GP79 == nCS3      is 1
+ * GP80 == nCS4      is 1
+ */
+#define CFG_GPSR0_VAL       0x03008000
+#define CFG_GPSR1_VAL       0xC0028282
+#define CFG_GPSR2_VAL       0x0001C000
+
+/* GP02 == DON_RST   is 0
+ * GP23 == SCLK      is 0
+ * GP45 == USB_ACT   is 0
+ * GP60 == PLLEN     is 0
+ * GP61 == LED_A     is 0
+ * GP73 == SWUPD_LED is 0
+ */
+#define CFG_GPCR0_VAL       0x00800004
+#define CFG_GPCR1_VAL       0x30002000
+#define CFG_GPCR2_VAL       0x00000100
+
+/* GP00 == DON_READY is input
+ * GP01 == DON_OK    is input
+ * GP02 == DON_RST   is output
+ * GP03 == RESET_IND is input
+ * GP07 == RES11     is input
+ * GP09 == RES12     is input
+ * GP11 == SWUPDATE  is input
+ * GP14 == nPOWEROK  is input
+ * GP15 == nCS1      is output
+ * GP17 == RES22     is input
+ * GP18 == RDY       is input
+ * GP23 == SCLK      is output
+ * GP24 == SFRM      is output
+ * GP25 == TXD       is output
+ * GP26 == RXD       is input
+ * GP32 == RES21     is input
+ * GP33 == nCS5      is output
+ * GP34 == FFRXD     is input
+ * GP35 == CTS       is input
+ * GP39 == FFTXD     is output
+ * GP41 == RTS       is output
+ * GP42 == USB_OK    is input
+ * GP45 == USB_ACT   is output
+ * GP46 == RXD       is input
+ * GP47 == TXD       is output
+ * GP49 == nPWE      is output
+ * GP58 == nCPUBUSINT is input
+ * GP59 == LANINT    is input
+ * GP60 == PLLEN     is output
+ * GP61 == LED_A     is output
+ * GP62 == LED_B     is output
+ * GP63 == TDM_OE    is output
+ * GP64 == nDSPINT   is input
+ * GP65 == STRAP0    is input
+ * GP67 == STRAP1    is input
+ * GP69 == STRAP2    is input
+ * GP70 == STRAP3    is input
+ * GP71 == STRAP4    is input
+ * GP73 == SWUPD_LED is output
+ * GP78 == nCS2      is output
+ * GP79 == nCS3      is output
+ * GP80 == nCS4      is output
+ */
+#define CFG_GPDR0_VAL       0x03808004
+#define CFG_GPDR1_VAL       0xF002A282
+#define CFG_GPDR2_VAL       0x0001C200
+
+/* GP15 == nCS1  is AF10
+ * GP18 == RDY   is AF01
+ * GP23 == SCLK  is AF10
+ * GP24 == SFRM  is AF10
+ * GP25 == TXD   is AF10
+ * GP26 == RXD   is AF01
+ * GP33 == nCS5  is AF10
+ * GP34 == FFRXD is AF01
+ * GP35 == CTS   is AF01
+ * GP39 == FFTXD is AF10
+ * GP41 == RTS   is AF10
+ * GP46 == RXD   is AF10
+ * GP47 == TXD   is AF01
+ * GP49 == nPWE  is AF10
+ * GP78 == nCS2  is AF10
+ * GP79 == nCS3  is AF10
+ * GP80 == nCS4  is AF10
+ */
+#define CFG_GAFR0_L_VAL     0x80000000
+#define CFG_GAFR0_U_VAL     0x001A8010
+#define CFG_GAFR1_L_VAL     0x60088058
+#define CFG_GAFR1_U_VAL     0x00000008
+#define CFG_GAFR2_L_VAL     0xA0000000
+#define CFG_GAFR2_U_VAL     0x00000002
+
+/* FIXME: set GPIO_RER/FER */
+
+/* RDH = 1
+ * PH  = 1
+ * VFS = 1
+ * BFS = 1
+ * SSS = 1
+ */
+#define CFG_PSSR_VAL		0x37
+
+/*
+ * Memory settings
+ */
+
+/* This is the configuration for nCS0/1 -> flash banks
+ * configuration for nCS1:
+ * [31]    0    - Slower Device
+ * [30:28] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
+ * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
+ * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
+ * [19]    1    - 16 Bit bus width
+ * [18:16] 000  - nonburst RAM or FLASH
+ * configuration for nCS0:
+ * [15]    0    - Slower Device
+ * [14:12] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
+ * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
+ * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
+ * [03]    1    - 16 Bit bus width
+ * [02:00] 000  - nonburst RAM or FLASH
+ */
+#define CFG_MSC0_VAL		0x25b825b8 /* flash banks                   */
+
+/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
+ * configuration for nCS3: DSP
+ * [31]    0    - Slower Device
+ * [30:28] 001  - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
+ * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
+ * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
+ * [19]    1    - 16 Bit bus width
+ * [18:16] 100  - variable latency I/O
+ * configuration for nCS2: TDM-Switch
+ * [15]    0    - Slower Device
+ * [14:12] 101  - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
+ * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
+ * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
+ * [03]    1    - 16 Bit bus width
+ * [02:00] 100  - variable latency I/O
+ */
+#define CFG_MSC1_VAL		0x132C593C /* TDM switch, DSP               */
+
+/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
+ *
+ * configuration for nCS5: LAN Controller
+ * [31]    0    - Slower Device
+ * [30:28] 001  - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
+ * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
+ * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
+ * [19]    1    - 16 Bit bus width
+ * [18:16] 100  - variable latency I/O
+ * configuration for nCS4: ExtBus
+ * [15]    0    - Slower Device
+ * [14:12] 110  - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
+ * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
+ * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
+ * [03]    1    - 16 Bit bus width
+ * [02:00] 100  - variable latency I/O
+ */
+#define CFG_MSC2_VAL		0x132C6CDC /* extra bus, LAN controller     */
+
+/* MDCNFG: SDRAM Configuration Register
+ *
+ * [31:29]   000 - reserved
+ * [28]      0	 - no SA1111 compatiblity mode
+ * [27]      0   - latch return data with return clock
+ * [26]      0   - alternate addressing for pair 2/3
+ * [25:24]   00  - timings
+ * [23]      0   - internal banks in lower partition 2/3 (not used)
+ * [22:21]   00  - row address bits for partition 2/3 (not used)
+ * [20:19]   00  - column address bits for partition 2/3 (not used)
+ * [18]      0   - SDRAM partition 2/3 width is 32 bit
+ * [17]      0   - SDRAM partition 3 disabled
+ * [16]      0   - SDRAM partition 2 disabled
+ * [15:13]   000 - reserved
+ * [12]      1	 - SA1111 compatiblity mode
+ * [11]      1   - latch return data with return clock
+ * [10]      0   - no alternate addressing for pair 0/1
+ * [09:08]   01  - tRP=2*MemClk; CL=2; tRCD=2*MemClk; tRAS=5*MemClk; tRC=8*MemClk
+ * [7]       1   - 4 internal banks in lower partition pair
+ * [06:05]   10  - 13 row address bits for partition 0/1
+ * [04:03]   01  - 9 column address bits for partition 0/1
+ * [02]      0   - SDRAM partition 0/1 width is 32 bit
+ * [01]      0   - disable SDRAM partition 1
+ * [00]      1   - enable  SDRAM partition 0
+ *
+ * use the configuration above but disable partition 0
+ */
+#define CFG_MDCNFG_VAL		0x000019c8
+
+/* MDREFR: SDRAM Refresh Control Register
+ *
+ * [32:26] 0     - reserved
+ * [25]    0     - K2FREE: not free running
+ * [24]    0     - K1FREE: not free running
+ * [23]    0     - K0FREE: not free running
+ * [22]    0     - SLFRSH: self refresh disabled
+ * [21]    0     - reserved
+ * [20]    0     - APD: no auto power down
+ * [19]    0     - K2DB2: SDCLK2 is MemClk
+ * [18]    0     - K2RUN: disable SDCLK2
+ * [17]    0     - K1DB2: SDCLK1 is MemClk
+ * [16]    1     - K1RUN: enable SDCLK1
+ * [15]    1     - E1PIN: SDRAM clock enable
+ * [14]    1     - K0DB2: SDCLK0 is MemClk
+ * [13]    1     - K0RUN: disable SDCLK0
+ * [12]    1     - E0PIN: disable SDCKE0
+ * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
+ */
+#define CFG_MDREFR_VAL		0x0001F018
+
+/* MDMRS: Mode Register Set Configuration Register
+ *
+ * [31]      0       - reserved
+ * [30:23]   00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
+ * [22:20]   000     - MDCL2:  SDRAM2/3 Cas Latency.  (not used)
+ * [19]      0       - MDADD2: SDRAM2/3 burst Type. Fixed to sequential.  (not used)
+ * [18:16]   010     - MDBL2:  SDRAM2/3 burst Length. Fixed to 4.  (not used)
+ * [15]      0       - reserved
+ * [14:07]   00000000- MDMRS0: SDRAM0/1 MRS Value.
+ * [06:04]   010     - MDCL0:  SDRAM0/1 Cas Latency.
+ * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
+ * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
+ */
+#define CFG_MDMRS_VAL		0x00020022
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL		0x00000000
+#define CFG_MCMEM0_VAL		0x00000000
+#define CFG_MCMEM1_VAL		0x00000000
+#define CFG_MCATT0_VAL		0x00000000
+#define CFG_MCATT1_VAL		0x00000000
+#define CFG_MCIO0_VAL		0x00000000
+#define CFG_MCIO1_VAL		0x00000000
+
+/*
+#define CSB226_USER_LED0	0x00000008
+#define CSB226_USER_LED1	0x00000010
+#define CSB226_USER_LED2	0x00000020
+*/
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS     1	/* max number of memory banks       */
+#define CFG_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase       */
+#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write       */
+
+#if 0
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
+                                        /* Addr of Environment Sector       */
+#define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */
+#endif
+
+#endif  /* __CONFIG_H */

include/configs/lubbock.h

@@ -70,12 +70,13 @@
 #include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY        3
-#define CONFIG_BOOTARGS         "root=ramfs devfs=mount console=ttySA0,9600"
 #define CONFIG_ETHADDR          08:00:3e:26:0a:5b
 #define CONFIG_NETMASK          255.255.0.0
 #define CONFIG_IPADDR           192.168.0.21
 #define CONFIG_SERVERIP         192.168.0.250
-#define CONFIG_BOOTCOMMAND      "FIXME"
+#define CONFIG_BOOTCOMMAND      "bootm 40000"
+#define CONFIG_BOOTARGS         "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
+#define CONFIG_CMDLINE_TAG      
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
@@ -100,7 +101,7 @@
 #define CFG_LOAD_ADDR           0xa8000000      /* default load address */
 
 #define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+#define CFG_CPUSPEED            0x161           /* set core clock to 400/200/100 MHz */
 
                                                 /* valid baudrates */
 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -130,8 +131,10 @@
 #define PHYS_SDRAM_4_SIZE       0x00000000 /* 0 MB */
 
 #define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2            0x04000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2            0x04000000 /* Flash Bank #2 */
 #define PHYS_FLASH_SIZE         0x02000000 /* 32 MB */
+#define PHYS_FLASH_BANK_SIZE    0x02000000 /* 32 MB Banks */
+#define PHYS_FLASH_SECT_SIZE    0x00040000 /* 256 KB sectors (x2) */
 
 #define CFG_DRAM_BASE           0xa0000000
 #define CFG_DRAM_SIZE           0x04000000
@@ -168,8 +171,7 @@
 #define CFG_MSC1_VAL        0x3FF1A441
 #define CFG_MSC2_VAL        0x7FF17FF1
 #define CFG_MDCNFG_VAL      0x00001AC9
-#define CFG_MDREFR_VAL      0x000BC018
-#define CFG_MDREFR_VAL_100  0x00018018
+#define CFG_MDREFR_VAL      0x00018018
 #define CFG_MDMRS_VAL       0x00000000
 
 /*
@@ -193,8 +195,8 @@
 #define CFG_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT    (25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT    (25*CFG_HZ) /* Timeout for Flash Write */
 
 /* FIXME */
 #define	CFG_ENV_IS_IN_FLASH	1

include/configs/trab.h

@@ -123,6 +123,7 @@
 #define CONFIG_BOOTARGS    	"console=ttyS0"
 #define CONFIG_NETMASK          255.255.0.0
 #define CONFIG_IPADDR		192.168.3.68
+#define CONFIG_HOSTNAME		trab
 #define CONFIG_SERVERIP		192.168.3.1
 #define CONFIG_BOOTCOMMAND	"run flash_nfs"
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
@@ -220,7 +221,11 @@
  * FLASH and environment organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#ifndef CONFIG_BIG_FLASH
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#else
 #define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#endif
 
 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
@@ -229,11 +234,18 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
+#ifndef CONFIG_BIG_FLASH
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
 #define CFG_ENV_SIZE		0x4000
+#define CFG_ENV_SECT_SIZE	0x4000
+#else
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
+#define CFG_ENV_SIZE		0x4000
+#define CFG_ENV_SECT_SIZE	0x20000
+#endif
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_ADDR+CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
 #endif	/* __CONFIG_H */

include/spd.h

@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2003 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * Serial Presence Detect (SPD) EEPROM format according to the
+ * Intel's PC SDRAM Serial Presence Detect (SPD) Specification,
+ * revision 1.2B, November 1999
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPD_H_
+#define _SPD_H_
+
+typedef struct spd_eeprom_s {
+   unsigned char info_size;   /* # of bytes written into serial memory           */
+   unsigned char chip_size;   /* Total # of bytes of SPD memory device           */
+   unsigned char mem_type;    /* Fundamental memory type (FPM, EDO, SDRAM...)    */
+   unsigned char nrow_addr;   /* # of Row Addresses on this assembly             */
+   unsigned char ncol_addr;   /* # of Column Addresses on this assembly          */
+   unsigned char nrows;       /* # of Module Rows on this assembly               */
+   unsigned char dataw_lsb;   /* Data Width of this assembly                     */
+   unsigned char dataw_msb;   /* ... Data Width continuation                     */
+   unsigned char voltage;     /* Voltage interface standard of this assembly     */
+   unsigned char clk_cycle;   /* SDRAM Cycle time at CL=X                        */
+   unsigned char clk_access;  /* SDRAM Access from Clock at CL=X                 */
+   unsigned char config;      /* DIMM Configuration type (non-parity, ECC)       */
+   unsigned char refresh;     /* Refresh Rate/Type                               */
+   unsigned char primw;       /* Primary SDRAM Width                             */
+   unsigned char ecw;         /* Error Checking SDRAM width                      */
+   unsigned char min_delay;   /* Min Clock Delay for Back to Back Random Address */
+   unsigned char burstl;      /* Burst Lengths Supported                         */
+   unsigned char nbanks;      /* # of Banks on Each SDRAM Device                 */
+   unsigned char cas_lat;     /* CAS# Latencies Supported                        */
+   unsigned char cs_lat;      /* CS# Latency                                     */
+   unsigned char write_lat;   /* Write Latency (also called Write Recovery time) */
+   unsigned char mod_attr;    /* SDRAM Module Attributes                         */
+   unsigned char dev_attr;    /* SDRAM Device Attributes                         */
+   unsigned char clk_cycle2;  /* Min SDRAM Cycle time at CL=X-1                  */
+   unsigned char clk_access2; /* SDRAM Access from Clock at CL=X-1               */
+   unsigned char clk_cycle3;  /* Min SDRAM Cycle time at CL=X-2                  */
+   unsigned char clk_access3; /* Max SDRAM Access from Clock at CL=X-2           */
+   unsigned char trp;         /* Min Row Precharge Time (tRP)                    */
+   unsigned char trrd;        /* Min Row Active to Row Active (tRRD)             */
+   unsigned char trcd;        /* Min RAS to CAS Delay (tRCD)                     */
+   unsigned char tras;        /* Minimum RAS Pulse Width (tRAS)                  */
+   unsigned char row_dens;    /* Density of each row on module                   */
+   unsigned char ca_setup;    /* Command and Address signal input setup time     */
+   unsigned char ca_hold;     /* Command and Address signal input hold time      */
+   unsigned char data_setup;  /* Data signal input setup time                    */
+   unsigned char data_hold;   /* Data signal input hold time                     */
+   unsigned char sset[26];    /* Superset Information (may be used in future)    */
+   unsigned char spd_rev;     /* SPD Data Revision Code                          */
+   unsigned char cksum;       /* Checksum for bytes 0-62                         */
+   unsigned char mid[8];      /* Manufacturer's JEDEC ID code per JEP-108E       */
+   unsigned char mloc;        /* Manufacturing Location                          */
+   unsigned char mpart[18];   /* Manufacturer's Part Number                      */
+   unsigned char rev[2];      /* Revision Code                                   */
+   unsigned char mdate[2];    /* Manufacturing Date                              */
+   unsigned char sernum[4];   /* Assembly Serial Number                          */
+   unsigned char mspec[27];   /* Manufacturer Specific Data                      */
+   unsigned char freq;        /* Intel specification frequency                   */
+   unsigned char intel_cas;   /* Intel Specification CAS# Latency support        */
+} spd_eeprom_t;
+
+#endif /* _SPD_H_ */

include/spd_sdram.h

@@ -0,0 +1,6 @@
+#ifndef _SPD_SDRAM_H_
+#define _SPD_SDRAM_H_
+
+long int spd_sdram(int(read_spd)(uint addr));
+
+#endif 

tools/envcrc.c

@@ -36,15 +36,33 @@
 # ifndef  CFG_ENV_OFFSET
 #  define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
 # endif
+# if !defined(CFG_ENV_ADDR_REDUND) && defined(CFG_ENV_OFFSET_REDUND)
+#  define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + CFG_ENV_OFFSET_REDUND)
+# endif
 # ifndef  CFG_ENV_SIZE
 #  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
 # endif
-# if ((CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \
-     ((CFG_ENV_ADDR+CFG_ENV_SIZE) <= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)))
-#  define ENV_IS_EMBEDDED
+# if defined(CFG_ENV_ADDR_REDUND) && !defined(CFG_ENV_SIZE_REDUND)
+#  define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+# endif
+# if (CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \
+     ((CFG_ENV_ADDR + CFG_ENV_SIZE) <= (CFG_MONITOR_BASE + CFG_MONITOR_LEN))
+#  define ENV_IS_EMBEDDED	1
+# endif
+# if defined(CFG_ENV_ADDR_REDUND) || defined(CFG_ENV_OFFSET_REDUND)
+#  define CFG_REDUNDAND_ENVIRONMENT	1
 # endif
 #endif	/* CFG_ENV_IS_IN_FLASH */
 
+#ifdef CFG_REDUNDAND_ENVIRONMENT
+# define ENV_HEADER_SIZE	(sizeof(unsigned long) + 1)
+#else
+# define ENV_HEADER_SIZE	(sizeof(unsigned long))
+#endif
+
+#define ENV_SIZE (CFG_ENV_SIZE - ENV_HEADER_SIZE)
+
+
 extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int);
 
 #ifdef	ENV_IS_EMBEDDED
@@ -57,9 +75,8 @@ int main (int argc, char **argv)
 #ifdef	ENV_IS_EMBEDDED
     int crc ;
     unsigned char 	*envptr 	= &environment,
-			*dataptr 	= envptr + sizeof(unsigned int) + 1;
-    unsigned int	datasize 	= env_size - (dataptr - envptr) ;
-
+			*dataptr 	= envptr + ENV_HEADER_SIZE;
+    unsigned int	datasize 	= ENV_SIZE;
 
     crc = crc32(0, dataptr, datasize) ;