Prepare v2014.04

Signed-off-by: Tom Rini <trini@ti.com>

Kbuild

@@ -42,13 +42,13 @@ $(obj)/$(generic-offsets-file): lib/asm-offsets.s Kbuild
 # 2) Generate asm-offsets.h
 #
 
-ifneq ($(wildcard $(srctree)/$(CPUDIR)/$(SOC)/asm-offsets.c),)
+ifneq ($(wildcard $(srctree)/arch/$(ARCH)/lib/asm-offsets.c),)
 offsets-file := include/generated/asm-offsets.h
 endif
 
 always  += $(offsets-file)
 targets += $(offsets-file)
-targets += $(CPUDIR)/$(SOC)/asm-offsets.s
+targets += arch/$(ARCH)/lib/asm-offsets.s
 
 
 # Default sed regexp - multiline due to syntax constraints
@@ -79,9 +79,9 @@ define cmd_offsets
 endef
 
 # We use internal kbuild rules to avoid the "is up to date" message from make
-$(CPUDIR)/$(SOC)/asm-offsets.s: $(CPUDIR)/$(SOC)/asm-offsets.c FORCE
+arch/$(ARCH)/lib/asm-offsets.s: arch/$(ARCH)/lib/asm-offsets.c FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,cc_s_c)
 
-$(obj)/$(offsets-file): $(CPUDIR)/$(SOC)/asm-offsets.s
+$(obj)/$(offsets-file): arch/$(ARCH)/lib/asm-offsets.s Kbuild
 	$(call cmd,offsets)

Makefile

@@ -8,7 +8,7 @@
 VERSION = 2014
 PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -124,7 +124,8 @@ ifneq ($(KBUILD_OUTPUT),)
 # Invoke a second make in the output directory, passing relevant variables
 # check that the output directory actually exists
 saved-output := $(KBUILD_OUTPUT)
-KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+								&& /bin/pwd)
 $(if $(KBUILD_OUTPUT),, \
      $(error output directory "$(saved-output)" does not exist))
 
@@ -165,14 +166,7 @@ VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
 export srctree objtree VPATH
 
-OBJTREE		:= $(objtree)
-SPLTREE		:= $(OBJTREE)/spl
-TPLTREE		:= $(OBJTREE)/tpl
-SRCTREE		:= $(srctree)
-TOPDIR		:= $(SRCTREE)
-export	TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE
-
-MKCONFIG	:= $(SRCTREE)/mkconfig
+MKCONFIG	:= $(srctree)/mkconfig
 export MKCONFIG
 
 # Make sure CDPATH settings don't interfere
@@ -415,7 +409,7 @@ timestamp_h := include/generated/timestamp_autogenerated.h
 
 no-dot-config-targets := clean clobber mrproper distclean \
 			 help %docs check% coccicheck \
-			 ubootversion backup
+			 ubootversion backup tools-only
 
 config-targets := 0
 mixed-targets  := 0
@@ -490,7 +484,7 @@ endif
 # standard location.
 
 ifndef LDSCRIPT
-	#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
+	#LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
 	ifdef CONFIG_SYS_LDSCRIPT
 		# need to strip off double quotes
 		LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
@@ -500,19 +494,19 @@ endif
 # If there is no specified link script, we look in a number of places for it
 ifndef LDSCRIPT
 	ifeq ($(CONFIG_NAND_U_BOOT),y)
-		LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+		LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-nand.lds
 		ifeq ($(wildcard $(LDSCRIPT)),)
-			LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
+			LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-nand.lds
 		endif
 	endif
 	ifeq ($(wildcard $(LDSCRIPT)),)
-		LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
+		LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
 	endif
 	ifeq ($(wildcard $(LDSCRIPT)),)
-		LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
+		LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
 	endif
 	ifeq ($(wildcard $(LDSCRIPT)),)
-		LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
+		LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
 	endif
 endif
 
@@ -556,11 +550,9 @@ export CONFIG_SYS_TEXT_BASE
 
 # Use UBOOTINCLUDE when you must reference the include/ directory.
 # Needed to be compatible with the O= option
-UBOOTINCLUDE    :=
-ifneq ($(OBJTREE),$(SRCTREE))
-UBOOTINCLUDE	+= -I$(OBJTREE)/include
-endif
-UBOOTINCLUDE	+= -I$(srctree)/include \
+UBOOTINCLUDE    := \
+		-Iinclude \
+		$(if $(KBUILD_SRC), -I$(srctree)/include) \
 		-I$(srctree)/arch/$(ARCH)/include
 
 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
@@ -668,7 +660,7 @@ export PLATFORM_LIBS
 # Pass the version down so we can handle backwards compatibility
 # on the fly.
 LDPPFLAGS += \
-	-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
+	-include $(srctree)/include/u-boot/u-boot.lds.h \
 	-DCPUDIR=$(CPUDIR) \
 	$(shell $(LD) --version | \
 	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
@@ -737,7 +729,7 @@ endif
 quiet_cmd_objcopy = OBJCOPY $@
 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 
-quiet_cmd_mkimage = UIMAGE  $@
+quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
 
@@ -758,6 +750,9 @@ dtbs dts/dt.dtb: checkdtc u-boot
 u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
 	$(call if_changed,cat)
 
+%.imx: %.bin
+	$(Q)$(MAKE) $(build)=arch/arm/imx-common $@
+
 quiet_cmd_copy = COPY    $@
       cmd_copy = cp $< $@
 
@@ -802,18 +797,15 @@ MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
 	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 
-MKIMAGEFLAGS_u-boot.kwb = -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
-		-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+	-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 
-MKIMAGEFLAGS_u-boot.pbl = -n $(CONFIG_SYS_FSL_PBL_RCW) \
-		-R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage
+MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 
 u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
 	$(call if_changed,mkimage)
 
-u-boot.imx: u-boot.bin
-	$(Q)$(MAKE) $(build)=arch/arm/imx-common $@
-
 u-boot.sha1:	u-boot.bin
 		tools/ubsha1 u-boot.bin
 
@@ -857,8 +849,10 @@ OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE)
 u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
 	$(call if_changed,pad_cat)
 
+u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
+	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
 u-boot.sb: u-boot.bin spl/u-boot-spl.bin
-	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs $(objtree)/u-boot.sb
+	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
 # Both images are created using mkimage (crc etc), so that the ROM
@@ -1059,11 +1053,11 @@ depend dep:
 
 # ---------------------------------------------------------------------------
 quiet_cmd_cpp_lds = LDS     $@
-cmd_cpp_lds = $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ \
-		-x assembler-with-cpp -P -o $@ $<
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
+		-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
 
 u-boot.lds: $(LDSCRIPT) prepare FORCE
-	$(call if_changed,cpp_lds)
+	$(call if_changed_dep,cpp_lds)
 
 PHONY += nand_spl
 nand_spl: prepare
@@ -1136,6 +1130,9 @@ checkarmreloc: u-boot
 env: scripts_basic
 	$(Q)$(MAKE) $(build)=tools/$@
 
+tools-only: scripts_basic $(version_h) $(timestamp_h)
+	$(Q)$(MAKE) $(build)=tools
+
 tools-all: export HOST_TOOLS_ALL=y
 tools-all: env tools ;
 
@@ -1181,7 +1178,7 @@ MRPROPER_FILES += .config .config.old \
 clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
 
-clean-dirs	:= $(foreach f,$(u-boot-alldirs),$(if $(wildcard $f/Makefile),$f))
+clean-dirs	:= $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
 
 clean-dirs      := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
 
@@ -1237,12 +1234,12 @@ distclean: mrproper
 	@find $(srctree) $(RCS_FIND_IGNORE) \
 		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
 		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-		-o -name '.*.rej' \
+		-o -name '.*.rej' -o -name '*.pyc' \
 		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
 		-type f -print | xargs rm -f
 
 backup:
-	F=`basename $(TOPDIR)` ; cd .. ; \
+	F=`basename $(srctree)` ; cd .. ; \
 	gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
 
 help:

README

@@ -566,6 +566,8 @@ The following options need to be configured:
 		CONFIG_ARM_ERRATA_742230
 		CONFIG_ARM_ERRATA_743622
 		CONFIG_ARM_ERRATA_751472
+		CONFIG_ARM_ERRATA_794072
+		CONFIG_ARM_ERRATA_761320
 
 		If set, the workarounds for these ARM errata are applied early
 		during U-Boot startup. Note that these options force the
@@ -1012,7 +1014,7 @@ The following options need to be configured:
 		CONFIG_CMD_CDP		* Cisco Discover Protocol support
 		CONFIG_CMD_MFSL		* Microblaze FSL support
 		CONFIG_CMD_XIMG		  Load part of Multi Image
-
+		CONFIG_CMD_UUID		* Generate random UUID or GUID string
 
 		EXAMPLE: If you want all functions except of network
 		support you can write:
@@ -1525,6 +1527,16 @@ The following options need to be configured:
 		this to the maximum filesize (in bytes) for the buffer.
 		Default is 4 MiB if undefined.
 
+		DFU_DEFAULT_POLL_TIMEOUT
+		Poll timeout [ms], is the timeout a device can send to the
+		host. The host must wait for this timeout before sending
+		a subsequent DFU_GET_STATUS request to the device.
+
+		DFU_MANIFEST_POLL_TIMEOUT
+		Poll timeout [ms], which the device sends to the host when
+		entering dfuMANIFEST state. Host waits this timeout, before
+		sending again an USB request to the device.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV

arch/arc/config.mk

@@ -23,8 +23,6 @@ endif
 
 PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -DCONFIG_ARC -gdwarf-2
 
-LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
-
 # Needed for relocation
 LDFLAGS_FINAL += -pie
 

arch/arm/config.mk

@@ -5,10 +5,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := arm-linux-
-endif
-
 ifndef CONFIG_STANDALONE_LOAD_ADDR
 ifneq ($(CONFIG_OMAP_COMMON),)
 CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
@@ -126,6 +122,10 @@ ifndef CONFIG_SPL_BUILD
 ALL-y += SPL
 endif
 else
+ifeq ($(CONFIG_OF_SEPARATE),y)
+ALL-y += u-boot-dtb.imx
+else
 ALL-y += u-boot.imx
 endif
 endif
+endif

arch/arm/cpu/arm1136/mx35/asm-offsets.c

@@ -1,71 +0,0 @@
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
-	/* Round up to make sure size gives nice stack alignment */
-	DEFINE(CLKCTL_CCMR, offsetof(struct ccm_regs, ccmr));
-	DEFINE(CLKCTL_PDR0, offsetof(struct ccm_regs, pdr0));
-	DEFINE(CLKCTL_PDR1, offsetof(struct ccm_regs, pdr1));
-	DEFINE(CLKCTL_PDR2, offsetof(struct ccm_regs, pdr2));
-	DEFINE(CLKCTL_PDR3, offsetof(struct ccm_regs, pdr3));
-	DEFINE(CLKCTL_PDR4, offsetof(struct ccm_regs, pdr4));
-	DEFINE(CLKCTL_RCSR, offsetof(struct ccm_regs, rcsr));
-	DEFINE(CLKCTL_MPCTL, offsetof(struct ccm_regs, mpctl));
-	DEFINE(CLKCTL_PPCTL, offsetof(struct ccm_regs, ppctl));
-	DEFINE(CLKCTL_ACMR, offsetof(struct ccm_regs, acmr));
-	DEFINE(CLKCTL_COSR, offsetof(struct ccm_regs, cosr));
-	DEFINE(CLKCTL_CGR0, offsetof(struct ccm_regs, cgr0));
-	DEFINE(CLKCTL_CGR1, offsetof(struct ccm_regs, cgr1));
-	DEFINE(CLKCTL_CGR2, offsetof(struct ccm_regs, cgr2));
-	DEFINE(CLKCTL_CGR3, offsetof(struct ccm_regs, cgr3));
-
-	/* Multi-Layer AHB Crossbar Switch */
-	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
-	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
-	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
-	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
-	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
-	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
-	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
-	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
-	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
-	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
-	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
-	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
-	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
-	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
-	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
-	DEFINE(MAX_MGPCR5, offsetof(struct max_regs, mgpcr5));
-
-	/* AHB <-> IP-Bus Interface */
-	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
-	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
-	DEFINE(AIPS_PACR_0_7, offsetof(struct aips_regs, pacr_0_7));
-	DEFINE(AIPS_PACR_8_15, offsetof(struct aips_regs, pacr_8_15));
-	DEFINE(AIPS_PACR_16_23, offsetof(struct aips_regs, pacr_16_23));
-	DEFINE(AIPS_PACR_24_31, offsetof(struct aips_regs, pacr_24_31));
-	DEFINE(AIPS_OPACR_0_7, offsetof(struct aips_regs, opacr_0_7));
-	DEFINE(AIPS_OPACR_8_15, offsetof(struct aips_regs, opacr_8_15));
-	DEFINE(AIPS_OPACR_16_23, offsetof(struct aips_regs, opacr_16_23));
-	DEFINE(AIPS_OPACR_24_31, offsetof(struct aips_regs, opacr_24_31));
-	DEFINE(AIPS_OPACR_32_39, offsetof(struct aips_regs, opacr_32_39));
-
-	return 0;
-}

arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c

@@ -1,62 +0,0 @@
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/mb86r0x.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
-	/* ddr2 controller */
-	DEFINE(DDR2_DRIC, offsetof(struct mb86r0x_ddr2c, dric));
-	DEFINE(DDR2_DRIC1, offsetof(struct mb86r0x_ddr2c, dric1));
-	DEFINE(DDR2_DRIC2, offsetof(struct mb86r0x_ddr2c, dric2));
-	DEFINE(DDR2_DRCA, offsetof(struct mb86r0x_ddr2c, drca));
-	DEFINE(DDR2_DRCM, offsetof(struct mb86r0x_ddr2c, drcm));
-	DEFINE(DDR2_DRCST1, offsetof(struct mb86r0x_ddr2c, drcst1));
-	DEFINE(DDR2_DRCST2, offsetof(struct mb86r0x_ddr2c, drcst2));
-	DEFINE(DDR2_DRCR, offsetof(struct mb86r0x_ddr2c, drcr));
-	DEFINE(DDR2_DRCF, offsetof(struct mb86r0x_ddr2c, drcf));
-	DEFINE(DDR2_DRASR, offsetof(struct mb86r0x_ddr2c, drasr));
-	DEFINE(DDR2_DRIMS, offsetof(struct mb86r0x_ddr2c, drims));
-	DEFINE(DDR2_DROS, offsetof(struct mb86r0x_ddr2c, dros));
-	DEFINE(DDR2_DRIBSODT1, offsetof(struct mb86r0x_ddr2c, dribsodt1));
-	DEFINE(DDR2_DROABA, offsetof(struct mb86r0x_ddr2c, droaba));
-	DEFINE(DDR2_DROBS, offsetof(struct mb86r0x_ddr2c, drobs));
-
-	/* clock reset generator */
-	DEFINE(CRG_CRPR, offsetof(struct mb86r0x_crg, crpr));
-	DEFINE(CRG_CRHA, offsetof(struct mb86r0x_crg, crha));
-	DEFINE(CRG_CRPA, offsetof(struct mb86r0x_crg, crpa));
-	DEFINE(CRG_CRPB, offsetof(struct mb86r0x_crg, crpb));
-	DEFINE(CRG_CRHB, offsetof(struct mb86r0x_crg, crhb));
-	DEFINE(CRG_CRAM, offsetof(struct mb86r0x_crg, cram));
-
-	/* chip control module */
-	DEFINE(CCNT_CDCRC, offsetof(struct mb86r0x_ccnt, cdcrc));
-
-	/* external bus interface */
-	DEFINE(MEMC_MCFMODE0, offsetof(struct mb86r0x_memc, mcfmode[0]));
-	DEFINE(MEMC_MCFMODE2, offsetof(struct mb86r0x_memc, mcfmode[2]));
-	DEFINE(MEMC_MCFMODE4, offsetof(struct mb86r0x_memc, mcfmode[4]));
-	DEFINE(MEMC_MCFTIM0, offsetof(struct mb86r0x_memc, mcftim[0]));
-	DEFINE(MEMC_MCFTIM2, offsetof(struct mb86r0x_memc, mcftim[2]));
-	DEFINE(MEMC_MCFTIM4, offsetof(struct mb86r0x_memc, mcftim[4]));
-	DEFINE(MEMC_MCFAREA0, offsetof(struct mb86r0x_memc, mcfarea[0]));
-	DEFINE(MEMC_MCFAREA2, offsetof(struct mb86r0x_memc, mcfarea[2]));
-	DEFINE(MEMC_MCFAREA4, offsetof(struct mb86r0x_memc, mcfarea[4]));
-
-	return 0;
-}

arch/arm/cpu/arm926ejs/mx25/asm-offsets.c

@@ -1,57 +0,0 @@
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
-	/* Clock Control Module */
-	DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl));
-	DEFINE(CCM_CGCR0, offsetof(struct ccm_regs, cgr0));
-	DEFINE(CCM_CGCR1, offsetof(struct ccm_regs, cgr1));
-	DEFINE(CCM_CGCR2, offsetof(struct ccm_regs, cgr2));
-	DEFINE(CCM_PCDR2, offsetof(struct ccm_regs, pcdr[2]));
-	DEFINE(CCM_MCR, offsetof(struct ccm_regs, mcr));
-
-	/* Enhanced SDRAM Controller */
-	DEFINE(ESDRAMC_ESDCTL0, offsetof(struct esdramc_regs, ctl0));
-	DEFINE(ESDRAMC_ESDCFG0, offsetof(struct esdramc_regs, cfg0));
-	DEFINE(ESDRAMC_ESDMISC, offsetof(struct esdramc_regs, misc));
-
-	/* Multi-Layer AHB Crossbar Switch */
-	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
-	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
-	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
-	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
-	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
-	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
-	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
-	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
-	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
-	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
-	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
-	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
-	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
-	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
-	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
-
-	/* AHB <-> IP-Bus Interface */
-	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
-	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
-
-	return 0;
-}

arch/arm/cpu/arm926ejs/mx27/asm-offsets.c

@@ -1,47 +0,0 @@
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
-	DEFINE(AIPI1_PSR0, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr0));
-	DEFINE(AIPI1_PSR1, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr1));
-	DEFINE(AIPI2_PSR0, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr0));
-	DEFINE(AIPI2_PSR1, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr1));
-
-	DEFINE(CSCR, IMX_PLL_BASE + offsetof(struct pll_regs, cscr));
-	DEFINE(MPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, mpctl0));
-	DEFINE(SPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, spctl0));
-	DEFINE(PCDR0, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr0));
-	DEFINE(PCDR1, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr1));
-	DEFINE(PCCR0, IMX_PLL_BASE + offsetof(struct pll_regs, pccr0));
-	DEFINE(PCCR1, IMX_PLL_BASE + offsetof(struct pll_regs, pccr1));
-
-	DEFINE(ESDCTL0_ROF, offsetof(struct esdramc_regs, esdctl0));
-	DEFINE(ESDCFG0_ROF, offsetof(struct esdramc_regs, esdcfg0));
-	DEFINE(ESDCTL1_ROF, offsetof(struct esdramc_regs, esdctl1));
-	DEFINE(ESDCFG1_ROF, offsetof(struct esdramc_regs, esdcfg1));
-	DEFINE(ESDMISC_ROF, offsetof(struct esdramc_regs, esdmisc));
-
-	DEFINE(GPCR, IMX_SYSTEM_CTL_BASE +
-		offsetof(struct system_control_regs, gpcr));
-	DEFINE(FMCR, IMX_SYSTEM_CTL_BASE +
-		offsetof(struct system_control_regs, fmcr));
-
-	return 0;
-}

arch/arm/cpu/arm926ejs/mxs/Makefile

@@ -14,11 +14,72 @@ obj-y	+= spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o
 endif
 
 # Specify the target for use in elftosb call
-MKIMAGE_TARGET-$(CONFIG_MX23) = mx23
-MKIMAGE_TARGET-$(CONFIG_MX28) = mx28
+MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage.mx23.cfg
+MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage.mx28.cfg
 
-$(OBJTREE)/mxsimage.cfg: $(SRCTREE)/$(CPUDIR)/$(SOC)/mxsimage.$(MKIMAGE_TARGET-y).cfg
-	sed "s@OBJTREE@$(OBJTREE)@g" $^ > $@
+# Generate HAB-capable IVT
+#
+# Note on computing the post-IVT size field value for the U-Boot binary.
+# The value is the result of adding the following:
+#  -> The size of U-Boot binary aligned to 64B (u-boot.bin)
+#  -> The size of IVT block aligned to 64B (u-boot.ivt)
+#  -> The size of U-Boot signature (u-boot.sig), 3904 B
+#  -> The 64B hole in front of U-Boot binary for 'struct mxs_spl_data' passing
+#
+quiet_cmd_mkivt_mxs = MXSIVT  $@
+cmd_mkivt_mxs =								\
+	sz=`expr \`stat -c "%s" $^\` + 64 + 3904 + 128` ;		\
+	echo -n "0x402000d1 $2 0 0 0 $3 $4 0 $$sz 0 0 0 0 0 0 0" |	\
+	tr -s " " | xargs -d " " -i printf "%08x\n" "{}" | rev |	\
+	sed "s/\(.\)\(.\)/\\\\\\\\x\2\1\n/g" | xargs -i printf "{}" >$@
 
-$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/mxsimage.cfg
-	$(OBJTREE)/tools/mkimage -n $(OBJTREE)/mxsimage.cfg -T mxsimage $@
+# Align binary to 64B
+quiet_cmd_mkalign_mxs = MXSALGN $@
+cmd_mkalign_mxs =							\
+	dd if=$^ of=$@ ibs=64 conv=sync 2>/dev/null &&			\
+	mv $@ $^
+
+# Assemble the CSF file
+quiet_cmd_mkcsfreq_mxs = MXSCSFR $@
+cmd_mkcsfreq_mxs =							\
+	ivt=$(word 1,$^) ;						\
+	bin=$(word 2,$^) ;						\
+	csf=$(word 3,$^) ;						\
+	sed "s@VENDOR@$(VENDOR)@g;s@BOARD@$(BOARD)@g" "$$csf" |		\
+		sed '/^\#\#Blocks/ d' > $@ ;				\
+	echo "  Blocks = $2 0x0 `stat -c '%s' $$bin` \"$$bin\" , \\" >> $@ ; \
+	echo "           $3 0x0 0x40 \"$$ivt\"" >> $@
+
+# Sign files
+quiet_cmd_mkcst_mxs = MXSCST  $@
+cmd_mkcst_mxs = cst -o $@ < $^						\
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+spl/u-boot-spl.ivt: spl/u-boot-spl.bin
+	$(call if_changed,mkalign_mxs)
+	$(call if_changed,mkivt_mxs,$(CONFIG_SPL_TEXT_BASE),\
+		0x00008000,0x00008040)
+
+u-boot.ivt: u-boot.bin
+	$(call if_changed,mkalign_mxs)
+	$(call if_changed,mkivt_mxs,$(CONFIG_SYS_TEXT_BASE),\
+		0x40001000,0x40001040)
+
+spl/u-boot-spl.csf: spl/u-boot-spl.ivt spl/u-boot-spl.bin board/$(VENDOR)/$(BOARD)/sign/u-boot-spl.csf
+	$(call if_changed,mkcsfreq_mxs,$(CONFIG_SPL_TEXT_BASE),0x8000)
+
+u-boot.csf: u-boot.ivt u-boot.bin board/$(VENDOR)/$(BOARD)/sign/u-boot.csf
+	$(call if_changed,mkcsfreq_mxs,$(CONFIG_SYS_TEXT_BASE),0x40001000)
+
+%.sig: %.csf
+	$(call if_changed,mkcst_mxs)
+
+quiet_cmd_mkimage_mxs = MKIMAGE $@
+cmd_mkimage_mxs = $(objtree)/tools/mkimage -n $< -T mxsimage $@ \
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+u-boot.sb: $(src)/$(MKIMAGE_TARGET-y) u-boot.bin spl/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage_mxs)
+
+u-boot-signed.sb: $(src)/mxsimage-signed.cfg u-boot.ivt u-boot.sig spl/u-boot-spl.ivt spl/u-boot-spl.sig FORCE
+	$(call if_changed,mkimage_mxs)

arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg

@@ -0,0 +1,10 @@
+SECTION 0x0 BOOTABLE
+ TAG LAST
+ LOAD     0x1000     spl/u-boot-spl.bin
+ LOAD     0x8000     spl/u-boot-spl.ivt
+ LOAD     0x8040     spl/u-boot-spl.sig
+ CALL HAB 0x8000     0x0
+ LOAD     0x40002000 u-boot.bin
+ LOAD     0x40001000 u-boot.ivt
+ LOAD     0x40001040 u-boot.sig
+ CALL HAB 0x40001000 0x0

arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg

@@ -1,6 +1,6 @@
 SECTION 0x0 BOOTABLE
  TAG LAST
- LOAD     0x0        OBJTREE/spl/u-boot-spl.bin
- CALL     0x14       0x0
- LOAD     0x40000100 OBJTREE/u-boot.bin
- CALL     0x40000100 0x0
+ LOAD     0x1000     spl/u-boot-spl.bin
+ CALL     0x1000     0x0
+ LOAD     0x40002000 u-boot.bin
+ CALL     0x40002000 0x0

arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg

@@ -1,8 +1,8 @@
 SECTION 0x0 BOOTABLE
  TAG LAST
- LOAD     0x0        OBJTREE/spl/u-boot-spl.bin
- LOAD IVT 0x8000     0x14
+ LOAD     0x1000     spl/u-boot-spl.bin
+ LOAD IVT 0x8000     0x1000
  CALL HAB 0x8000     0x0
- LOAD     0x40000100 OBJTREE/u-boot.bin
- LOAD IVT 0x8000     0x40000100
+ LOAD     0x40002000 u-boot.bin
+ LOAD IVT 0x8000     0x40002000
  CALL HAB 0x8000     0x0

arch/arm/cpu/arm926ejs/mxs/spl_boot.c

@@ -13,9 +13,16 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
+#include <linux/compiler.h>
 
 #include "mxs_init.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+static gd_t gdata __section(".data");
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+static bd_t bdata __section(".data");
+#endif
+
 /*
  * This delay function is intended to be used only in early stage of boot, where
  * clock are not set up yet. The timer used here is reset on every boot and
@@ -102,6 +109,28 @@ static uint8_t mxs_get_bootmode_index(void)
 	return i;
 }
 
+static void mxs_spl_fixup_vectors(void)
+{
+	/*
+	 * Copy our vector table to 0x0, since due to HAB, we cannot
+	 * be loaded to 0x0. We want to have working vectoring though,
+	 * thus this fixup. Our vectoring table is PIC, so copying is
+	 * fine.
+	 */
+	extern uint32_t _start;
+	memcpy(0x0, &_start, 0x60);
+}
+
+static void mxs_spl_console_init(void)
+{
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+	gd->bd = &bdata;
+	gd->baudrate = CONFIG_BAUDRATE;
+	serial_init();
+	gd->have_console = 1;
+#endif
+}
+
 void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
 			 const iomux_cfg_t *iomux_setup,
 			 const unsigned int iomux_size)
@@ -109,8 +138,14 @@ void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
 	struct mxs_spl_data *data = (struct mxs_spl_data *)
 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 	uint8_t bootmode = mxs_get_bootmode_index();
+	gd = &gdata;
+
+	mxs_spl_fixup_vectors();
 
 	mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size);
+
+	mxs_spl_console_init();
+
 	mxs_power_init();
 
 	mxs_mem_init();

arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd

@@ -4,8 +4,8 @@ options {
 }
 
 sources {
-	u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
-	u_boot="OBJTREE/u-boot.bin";
+	u_boot_spl="spl/u-boot-spl.bin";
+	u_boot="u-boot.bin";
 }
 
 section (0) {

arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd

@@ -1,6 +1,6 @@
 sources {
-	u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
-	u_boot="OBJTREE/u-boot.bin";
+	u_boot_spl="spl/u-boot-spl.bin";
+	u_boot="u-boot.bin";
 }
 
 section (0) {

arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds

@@ -16,7 +16,7 @@ OUTPUT_ARCH(arm)
 ENTRY(_start)
 SECTIONS
 {
-	. = 0x00000000;
+	. = CONFIG_SPL_TEXT_BASE;
 
 	. = ALIGN(4);
 	.text	:

arch/arm/cpu/armv7/am33xx/board.c

@@ -202,6 +202,7 @@ static void watchdog_disable(void)
 }
 #endif
 
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 void s_init(void)
 {
 	/*
@@ -220,22 +221,19 @@ void s_init(void)
 #ifdef CONFIG_SPL_BUILD
 	save_omap_boot_params();
 #endif
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 	watchdog_disable();
 	timer_init();
 	set_uart_mux_conf();
 	setup_clocks_for_console();
 	uart_soft_reset();
-#endif
 #ifdef CONFIG_NOR_BOOT
 	gd->baudrate = CONFIG_BAUDRATE;
 	serial_init();
 	gd->have_console = 1;
-#else
+#elif defined(CONFIG_SPL_BUILD)
 	gd = &gdata;
 	preloader_console_init();
 #endif
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 	prcm_init();
 	set_mux_conf_regs();
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
@@ -243,8 +241,8 @@ void s_init(void)
 	rtc32k_enable();
 #endif
 	sdram_init();
-#endif
 }
+#endif
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)

arch/arm/cpu/armv7/exynos/pinmux.c

@@ -39,6 +39,9 @@ static void exynos5_uart_config(int peripheral)
 		start = 4;
 		count = 2;
 		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
 	}
 	for (i = start; i < start + count; i++) {
 		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
@@ -74,6 +77,9 @@ static void exynos5420_uart_config(int peripheral)
 		start = 4;
 		count = 2;
 		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
 	}
 
 	for (i = start; i < start + count; i++) {
@@ -110,6 +116,9 @@ static int exynos5_mmc_config(int peripheral, int flags)
 		bank = &gpio1->c4;
 		bank_ext = NULL;
 		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
 	}
 	if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
 		debug("SDMMC device %d does not support 8bit mode",
@@ -683,6 +692,9 @@ static void exynos4_uart_config(int peripheral)
 		start = 4;
 		count = 2;
 		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
 	}
 	for (i = start; i < start + count; i++) {
 		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
@@ -741,6 +753,21 @@ int exynos_pinmux_config(int peripheral, int flags)
 }
 
 #ifdef CONFIG_OF_CONTROL
+static int exynos4_pinmux_decode_periph_id(const void *blob, int node)
+{
+	int err;
+	u32 cell[3];
+
+	err = fdtdec_get_int_array(blob, node, "interrupts", cell,
+					ARRAY_SIZE(cell));
+	if (err) {
+		debug(" invalid peripheral id\n");
+		return PERIPH_ID_NONE;
+	}
+
+	return cell[1];
+}
+
 static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
 {
 	int err;
@@ -758,6 +785,8 @@ int pinmux_decode_periph_id(const void *blob, int node)
 {
 	if (cpu_is_exynos5())
 		return  exynos5_pinmux_decode_periph_id(blob, node);
+	else if (cpu_is_exynos4())
+		return  exynos4_pinmux_decode_periph_id(blob, node);
 	else
 		return PERIPH_ID_NONE;
 }

arch/arm/cpu/armv7/mx5/asm-offsets.c

@@ -1,73 +0,0 @@
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
-
-	/* Round up to make sure size gives nice stack alignment */
-	DEFINE(CLKCTL_CCMR, offsetof(struct clkctl, ccr));
-	DEFINE(CLKCTL_CCDR, offsetof(struct clkctl, ccdr));
-	DEFINE(CLKCTL_CSR, offsetof(struct clkctl, csr));
-	DEFINE(CLKCTL_CCSR, offsetof(struct clkctl, ccsr));
-	DEFINE(CLKCTL_CACRR, offsetof(struct clkctl, cacrr));
-	DEFINE(CLKCTL_CBCDR, offsetof(struct clkctl, cbcdr));
-	DEFINE(CLKCTL_CBCMR, offsetof(struct clkctl, cbcmr));
-	DEFINE(CLKCTL_CSCMR1, offsetof(struct clkctl, cscmr1));
-	DEFINE(CLKCTL_CSCMR2, offsetof(struct clkctl, cscmr2));
-	DEFINE(CLKCTL_CSCDR1, offsetof(struct clkctl, cscdr1));
-	DEFINE(CLKCTL_CS1CDR, offsetof(struct clkctl, cs1cdr));
-	DEFINE(CLKCTL_CS2CDR, offsetof(struct clkctl, cs2cdr));
-	DEFINE(CLKCTL_CDCDR, offsetof(struct clkctl, cdcdr));
-	DEFINE(CLKCTL_CHSCCDR, offsetof(struct clkctl, chsccdr));
-	DEFINE(CLKCTL_CSCDR2, offsetof(struct clkctl, cscdr2));
-	DEFINE(CLKCTL_CSCDR3, offsetof(struct clkctl, cscdr3));
-	DEFINE(CLKCTL_CSCDR4, offsetof(struct clkctl, cscdr4));
-	DEFINE(CLKCTL_CWDR, offsetof(struct clkctl, cwdr));
-	DEFINE(CLKCTL_CDHIPR, offsetof(struct clkctl, cdhipr));
-	DEFINE(CLKCTL_CDCR, offsetof(struct clkctl, cdcr));
-	DEFINE(CLKCTL_CTOR, offsetof(struct clkctl, ctor));
-	DEFINE(CLKCTL_CLPCR, offsetof(struct clkctl, clpcr));
-	DEFINE(CLKCTL_CISR, offsetof(struct clkctl, cisr));
-	DEFINE(CLKCTL_CIMR, offsetof(struct clkctl, cimr));
-	DEFINE(CLKCTL_CCOSR, offsetof(struct clkctl, ccosr));
-	DEFINE(CLKCTL_CGPR, offsetof(struct clkctl, cgpr));
-	DEFINE(CLKCTL_CCGR0, offsetof(struct clkctl, ccgr0));
-	DEFINE(CLKCTL_CCGR1, offsetof(struct clkctl, ccgr1));
-	DEFINE(CLKCTL_CCGR2, offsetof(struct clkctl, ccgr2));
-	DEFINE(CLKCTL_CCGR3, offsetof(struct clkctl, ccgr3));
-	DEFINE(CLKCTL_CCGR4, offsetof(struct clkctl, ccgr4));
-	DEFINE(CLKCTL_CCGR5, offsetof(struct clkctl, ccgr5));
-	DEFINE(CLKCTL_CCGR6, offsetof(struct clkctl, ccgr6));
-	DEFINE(CLKCTL_CMEOR, offsetof(struct clkctl, cmeor));
-#if defined(CONFIG_MX53)
-	DEFINE(CLKCTL_CCGR7, offsetof(struct clkctl, ccgr7));
-#endif
-
-	/* DPLL */
-	DEFINE(PLL_DP_CTL, offsetof(struct dpll, dp_ctl));
-	DEFINE(PLL_DP_CONFIG, offsetof(struct dpll, dp_config));
-	DEFINE(PLL_DP_OP, offsetof(struct dpll, dp_op));
-	DEFINE(PLL_DP_MFD, offsetof(struct dpll, dp_mfd));
-	DEFINE(PLL_DP_MFN, offsetof(struct dpll, dp_mfn));
-	DEFINE(PLL_DP_HFS_OP, offsetof(struct dpll, dp_hfs_op));
-	DEFINE(PLL_DP_HFS_MFD, offsetof(struct dpll, dp_hfs_mfd));
-	DEFINE(PLL_DP_HFS_MFN, offsetof(struct dpll, dp_hfs_mfn));
-
-	return 0;
-}

arch/arm/cpu/armv7/socfpga/Makefile

@@ -8,5 +8,5 @@
 #
 
 obj-y	:= lowlevel_init.o
-obj-y	+= misc.o timer.o reset_manager.o system_manager.o
+obj-y	+= misc.o timer.o reset_manager.o system_manager.o clock_manager.o
 obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o

arch/arm/cpu/armv7/socfpga/clock_manager.c

@@ -0,0 +1,361 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+
+static const struct socfpga_clock_manager *clock_manager_base =
+		(void *)SOCFPGA_CLKMGR_ADDRESS;
+
+#define CLKMGR_BYPASS_ENABLE	1
+#define CLKMGR_BYPASS_DISABLE	0
+#define CLKMGR_STAT_IDLE	0
+#define CLKMGR_STAT_BUSY	1
+#define CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1		0
+#define CLKMGR_BYPASS_PERPLLSRC_SELECT_INPUT_MUX	1
+#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1		0
+#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_INPUT_MUX	1
+
+#define CLEAR_BGP_EN_PWRDN \
+	(CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
+	CLKMGR_MAINPLLGRP_VCO_EN_SET(0)| \
+	CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
+
+#define VCO_EN_BASE \
+	(CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
+	CLKMGR_MAINPLLGRP_VCO_EN_SET(1)| \
+	CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
+
+static inline void cm_wait_for_lock(uint32_t mask)
+{
+	register uint32_t inter_val;
+	do {
+		inter_val = readl(&clock_manager_base->inter) & mask;
+	} while (inter_val != mask);
+}
+
+/* function to poll in the fsm busy bit */
+static inline void cm_wait_for_fsm(void)
+{
+	while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
+		;
+}
+
+/*
+ * function to write the bypass register which requires a poll of the
+ * busy bit
+ */
+static inline void cm_write_bypass(uint32_t val)
+{
+	writel(val, &clock_manager_base->bypass);
+	cm_wait_for_fsm();
+}
+
+/* function to write the ctrl register which requires a poll of the busy bit */
+static inline void cm_write_ctrl(uint32_t val)
+{
+	writel(val, &clock_manager_base->ctrl);
+	cm_wait_for_fsm();
+}
+
+/* function to write a clock register that has phase information */
+static inline void cm_write_with_phase(uint32_t value,
+	uint32_t reg_address, uint32_t mask)
+{
+	/* poll until phase is zero */
+	while (readl(reg_address) & mask)
+		;
+
+	writel(value, reg_address);
+
+	while (readl(reg_address) & mask)
+		;
+}
+
+/*
+ * Setup clocks while making no assumptions about previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ * Put all plls in bypass
+ * Put all plls VCO registers back to reset value (bandgap power down).
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ * Delay 5 us.
+ * Deassert bandgap power down and set numerator and denominator
+ * Start 7 us timer.
+ * set internal dividers
+ * Wait for 7 us timer.
+ * Enable plls
+ * Set external dividers while plls are locking
+ * Wait for pll lock
+ * Assert/deassert outreset all.
+ * Take all pll's out of bypass
+ * Clear safe mode
+ * set source main and peripheral clocks
+ * Ungate clocks
+ */
+
+void cm_basic_init(const cm_config_t *cfg)
+{
+	uint32_t start, timeout;
+
+	/* Start by being paranoid and gate all sw managed clocks */
+
+	/*
+	 * We need to disable nandclk
+	 * and then do another apb access before disabling
+	 * gatting off the rest of the periperal clocks.
+	 */
+	writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
+		readl(&clock_manager_base->per_pll_en),
+		&clock_manager_base->per_pll_en);
+
+	/* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
+	writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
+		CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
+		&clock_manager_base->main_pll_en);
+
+	writel(0, &clock_manager_base->sdr_pll_en);
+
+	/* now we can gate off the rest of the peripheral clocks */
+	writel(0, &clock_manager_base->per_pll_en);
+
+	/* Put all plls in bypass */
+	cm_write_bypass(
+		CLKMGR_BYPASS_PERPLLSRC_SET(
+		CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
+		CLKMGR_BYPASS_SDRPLLSRC_SET(
+		CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
+		CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_ENABLE) |
+		CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_ENABLE) |
+		CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_ENABLE));
+
+	/*
+	 * Put all plls VCO registers back to reset value.
+	 * Some code might have messed with them.
+	 */
+	writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE,
+	       &clock_manager_base->main_pll_vco);
+	writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE,
+	       &clock_manager_base->per_pll_vco);
+	writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE,
+	       &clock_manager_base->sdr_pll_vco);
+
+	/*
+	 * The clocks to the flash devices and the L4_MAIN clocks can
+	 * glitch when coming out of safe mode if their source values
+	 * are different from their reset value.  So the trick it to
+	 * put them back to their reset state, and change input
+	 * after exiting safe mode but before ungating the clocks.
+	 */
+	writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
+	       &clock_manager_base->per_pll_src);
+	writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
+	       &clock_manager_base->main_pll_l4src);
+
+	/* read back for the required 5 us delay. */
+	readl(&clock_manager_base->main_pll_vco);
+	readl(&clock_manager_base->per_pll_vco);
+	readl(&clock_manager_base->sdr_pll_vco);
+
+
+	/*
+	 * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
+	 * with numerator and denominator.
+	 */
+	writel(cfg->main_vco_base | CLEAR_BGP_EN_PWRDN |
+		CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
+		&clock_manager_base->main_pll_vco);
+
+	writel(cfg->peri_vco_base | CLEAR_BGP_EN_PWRDN |
+		CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
+		&clock_manager_base->per_pll_vco);
+
+	writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
+		CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
+		cfg->sdram_vco_base | CLEAR_BGP_EN_PWRDN |
+		CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
+		&clock_manager_base->sdr_pll_vco);
+
+	/*
+	 * Time starts here
+	 * must wait 7 us from BGPWRDN_SET(0) to VCO_ENABLE_SET(1)
+	 */
+	reset_timer();
+	start = get_timer(0);
+	/* timeout in unit of us as CONFIG_SYS_HZ = 1000*1000 */
+	timeout = 7;
+
+	/* main mpu */
+	writel(cfg->mpuclk, &clock_manager_base->main_pll_mpuclk);
+
+	/* main main clock */
+	writel(cfg->mainclk, &clock_manager_base->main_pll_mainclk);
+
+	/* main for dbg */
+	writel(cfg->dbgatclk, &clock_manager_base->main_pll_dbgatclk);
+
+	/* main for cfgs2fuser0clk */
+	writel(cfg->cfg2fuser0clk,
+	       &clock_manager_base->main_pll_cfgs2fuser0clk);
+
+	/* Peri emac0 50 MHz default to RMII */
+	writel(cfg->emac0clk, &clock_manager_base->per_pll_emac0clk);
+
+	/* Peri emac1 50 MHz default to RMII */
+	writel(cfg->emac1clk, &clock_manager_base->per_pll_emac1clk);
+
+	/* Peri QSPI */
+	writel(cfg->mainqspiclk, &clock_manager_base->main_pll_mainqspiclk);
+
+	writel(cfg->perqspiclk, &clock_manager_base->per_pll_perqspiclk);
+
+	/* Peri pernandsdmmcclk */
+	writel(cfg->pernandsdmmcclk,
+	       &clock_manager_base->per_pll_pernandsdmmcclk);
+
+	/* Peri perbaseclk */
+	writel(cfg->perbaseclk, &clock_manager_base->per_pll_perbaseclk);
+
+	/* Peri s2fuser1clk */
+	writel(cfg->s2fuser1clk, &clock_manager_base->per_pll_s2fuser1clk);
+
+	/* 7 us must have elapsed before we can enable the VCO */
+	while (get_timer(start) < timeout)
+		;
+
+	/* Enable vco */
+	/* main pll vco */
+	writel(cfg->main_vco_base | VCO_EN_BASE,
+	       &clock_manager_base->main_pll_vco);
+
+	/* periferal pll */
+	writel(cfg->peri_vco_base | VCO_EN_BASE,
+	       &clock_manager_base->per_pll_vco);
+
+	/* sdram pll vco */
+	writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
+		CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
+		cfg->sdram_vco_base | VCO_EN_BASE,
+		&clock_manager_base->sdr_pll_vco);
+
+	/* L3 MP and L3 SP */
+	writel(cfg->maindiv, &clock_manager_base->main_pll_maindiv);
+
+	writel(cfg->dbgdiv, &clock_manager_base->main_pll_dbgdiv);
+
+	writel(cfg->tracediv, &clock_manager_base->main_pll_tracediv);
+
+	/* L4 MP, L4 SP, can0, and can1 */
+	writel(cfg->perdiv, &clock_manager_base->per_pll_div);
+
+	writel(cfg->gpiodiv, &clock_manager_base->per_pll_gpiodiv);
+
+#define LOCKED_MASK \
+	(CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
+	CLKMGR_INTER_PERPLLLOCKED_MASK  | \
+	CLKMGR_INTER_MAINPLLLOCKED_MASK)
+
+	cm_wait_for_lock(LOCKED_MASK);
+
+	/* write the sdram clock counters before toggling outreset all */
+	writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
+	       &clock_manager_base->sdr_pll_ddrdqsclk);
+
+	writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
+	       &clock_manager_base->sdr_pll_ddr2xdqsclk);
+
+	writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
+	       &clock_manager_base->sdr_pll_ddrdqclk);
+
+	writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
+	       &clock_manager_base->sdr_pll_s2fuser2clk);
+
+	/*
+	 * after locking, but before taking out of bypass
+	 * assert/deassert outresetall
+	 */
+	uint32_t mainvco = readl(&clock_manager_base->main_pll_vco);
+
+	/* assert main outresetall */
+	writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+	       &clock_manager_base->main_pll_vco);
+
+	uint32_t periphvco = readl(&clock_manager_base->per_pll_vco);
+
+	/* assert pheriph outresetall */
+	writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+	       &clock_manager_base->per_pll_vco);
+
+	/* assert sdram outresetall */
+	writel(cfg->sdram_vco_base | VCO_EN_BASE|
+		CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(1),
+		&clock_manager_base->sdr_pll_vco);
+
+	/* deassert main outresetall */
+	writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+	       &clock_manager_base->main_pll_vco);
+
+	/* deassert pheriph outresetall */
+	writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+	       &clock_manager_base->per_pll_vco);
+
+	/* deassert sdram outresetall */
+	writel(CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
+		cfg->sdram_vco_base | VCO_EN_BASE,
+		&clock_manager_base->sdr_pll_vco);
+
+	/*
+	 * now that we've toggled outreset all, all the clocks
+	 * are aligned nicely; so we can change any phase.
+	 */
+	cm_write_with_phase(cfg->ddrdqsclk,
+			    (uint32_t)&clock_manager_base->sdr_pll_ddrdqsclk,
+			    CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+
+	/* SDRAM DDR2XDQSCLK */
+	cm_write_with_phase(cfg->ddr2xdqsclk,
+			    (uint32_t)&clock_manager_base->sdr_pll_ddr2xdqsclk,
+			    CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+
+	cm_write_with_phase(cfg->ddrdqclk,
+			    (uint32_t)&clock_manager_base->sdr_pll_ddrdqclk,
+			    CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+
+	cm_write_with_phase(cfg->s2fuser2clk,
+			    (uint32_t)&clock_manager_base->sdr_pll_s2fuser2clk,
+			    CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+
+	/* Take all three PLLs out of bypass when safe mode is cleared. */
+	cm_write_bypass(
+		CLKMGR_BYPASS_PERPLLSRC_SET(
+			CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
+		CLKMGR_BYPASS_SDRPLLSRC_SET(
+			CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
+		CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_DISABLE) |
+		CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_DISABLE) |
+		CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_DISABLE));
+
+	/* clear safe mode */
+	cm_write_ctrl(readl(&clock_manager_base->ctrl) |
+			CLKMGR_CTRL_SAFEMODE_SET(CLKMGR_CTRL_SAFEMODE_MASK));
+
+	/*
+	 * now that safe mode is clear with clocks gated
+	 * it safe to change the source mux for the flashes the the L4_MAIN
+	 */
+	writel(cfg->persrc, &clock_manager_base->per_pll_src);
+	writel(cfg->l4src, &clock_manager_base->main_pll_l4src);
+
+	/* Now ungate non-hw-managed clocks */
+	writel(~0, &clock_manager_base->main_pll_en);
+	writel(~0, &clock_manager_base->per_pll_en);
+	writel(~0, &clock_manager_base->sdr_pll_en);
+}

arch/arm/cpu/armv7/socfpga/spl.c

@@ -28,10 +28,99 @@ u32 spl_boot_device(void)
 void spl_board_init(void)
 {
 #ifndef CONFIG_SOCFPGA_VIRTUAL_TARGET
+	cm_config_t cm_default_cfg = {
+		/* main group */
+		MAIN_VCO_BASE,
+		CLKMGR_MAINPLLGRP_MPUCLK_CNT_SET(
+			CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT),
+		CLKMGR_MAINPLLGRP_MAINCLK_CNT_SET(
+			CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT),
+		CLKMGR_MAINPLLGRP_DBGATCLK_CNT_SET(
+			CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT),
+		CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_SET(
+			CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT),
+		CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_SET(
+			CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT),
+		CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_SET(
+			CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT),
+		CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_SET(
+			CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK) |
+		CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_SET(
+			CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK) |
+		CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_SET(
+			CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK) |
+		CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_SET(
+			CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK),
+		CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_SET(
+			CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK) |
+		CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_SET(
+			CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK),
+		CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_SET(
+			CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK),
+		CLKMGR_MAINPLLGRP_L4SRC_L4MP_SET(
+			CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP) |
+		CLKMGR_MAINPLLGRP_L4SRC_L4SP_SET(
+			CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP),
+
+		/* peripheral group */
+		PERI_VCO_BASE,
+		CLKMGR_PERPLLGRP_EMAC0CLK_CNT_SET(
+			CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT),
+		CLKMGR_PERPLLGRP_EMAC1CLK_CNT_SET(
+			CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT),
+		CLKMGR_PERPLLGRP_PERQSPICLK_CNT_SET(
+			CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT),
+		CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_SET(
+			CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT),
+		CLKMGR_PERPLLGRP_PERBASECLK_CNT_SET(
+			CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT),
+		CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_SET(
+			CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT),
+		CLKMGR_PERPLLGRP_DIV_USBCLK_SET(
+			CONFIG_HPS_PERPLLGRP_DIV_USBCLK) |
+		CLKMGR_PERPLLGRP_DIV_SPIMCLK_SET(
+			CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK) |
+		CLKMGR_PERPLLGRP_DIV_CAN0CLK_SET(
+			CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK) |
+		CLKMGR_PERPLLGRP_DIV_CAN1CLK_SET(
+			CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK),
+		CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_SET(
+			CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK),
+		CLKMGR_PERPLLGRP_SRC_QSPI_SET(
+			CONFIG_HPS_PERPLLGRP_SRC_QSPI) |
+		CLKMGR_PERPLLGRP_SRC_NAND_SET(
+			CONFIG_HPS_PERPLLGRP_SRC_NAND) |
+		CLKMGR_PERPLLGRP_SRC_SDMMC_SET(
+			CONFIG_HPS_PERPLLGRP_SRC_SDMMC),
+
+		/* sdram pll group */
+		SDR_VCO_BASE,
+		CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_SET(
+			CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE) |
+		CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_SET(
+			CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT),
+		CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_SET(
+			CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE) |
+		CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_SET(
+			CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT),
+		CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_SET(
+			CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE) |
+		CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_SET(
+			CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT),
+		CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_SET(
+			CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE) |
+		CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_SET(
+			CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT),
+	};
+
 	debug("Freezing all I/O banks\n");
 	/* freeze all IO banks */
 	sys_mgr_frzctrl_freeze_req();
 
+	debug("Reconfigure Clock Manager\n");
+	/* reconfigure the PLLs */
+	cm_basic_init(&cm_default_cfg);
+
 	/* configure the pin muxing through system manager */
 	sysmgr_pinmux_init();
 #endif /* CONFIG_SOCFPGA_VIRTUAL_TARGET */

arch/arm/cpu/armv7/start.S

@@ -205,7 +205,7 @@ ENTRY(cpu_init_cp15)
 	mcr	p15, 0, r0, c1, c0, 0	@ write system control register
 #endif
 
-#ifdef CONFIG_ARM_ERRATA_742230
+#if (defined(CONFIG_ARM_ERRATA_742230) || defined(CONFIG_ARM_ERRATA_794072))
 	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
 	orr	r0, r0, #1 << 4		@ set bit #4
 	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
@@ -222,6 +222,11 @@ ENTRY(cpu_init_cp15)
 	orr	r0, r0, #1 << 11	@ set bit #11
 	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
 #endif
+#ifdef CONFIG_ARM_ERRATA_761320
+	mrc	p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr	r0, r0, #1 << 21	@ set bit #21
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
 
 	mov	pc, lr			@ back to my caller
 ENDPROC(cpu_init_cp15)

arch/arm/cpu/armv8/Makefile

@@ -13,5 +13,4 @@ obj-y	+= cache_v8.o
 obj-y	+= exceptions.o
 obj-y	+= cache.o
 obj-y	+= tlb.o
-obj-y	+= gic.o
 obj-y	+= transition.o

arch/arm/cpu/armv8/cache.S

@@ -19,23 +19,22 @@
  * clean and invalidate one level cache.
  *
  * x0: cache level
- * x1~x9: clobbered
+ * x1: 0 flush & invalidate, 1 invalidate only
+ * x2~x9: clobbered
  */
 ENTRY(__asm_flush_dcache_level)
-	lsl	x1, x0, #1
-	msr	csselr_el1, x1		/* select cache level */
+	lsl	x12, x0, #1
+	msr	csselr_el1, x12		/* select cache level */
 	isb				/* sync change of cssidr_el1 */
 	mrs	x6, ccsidr_el1		/* read the new cssidr_el1 */
 	and	x2, x6, #7		/* x2 <- log2(cache line size)-4 */
 	add	x2, x2, #4		/* x2 <- log2(cache line size) */
 	mov	x3, #0x3ff
 	and	x3, x3, x6, lsr #3	/* x3 <- max number of #ways */
-	add	w4, w3, w3
-	sub	w4, w4, 1		/* round up log2(#ways + 1) */
-	clz	w5, w4			/* bit position of #ways */
+	clz	w5, w3			/* bit position of #ways */
 	mov	x4, #0x7fff
 	and	x4, x4, x6, lsr #13	/* x4 <- max number of #sets */
-	/* x1 <- cache level << 1 */
+	/* x12 <- cache level << 1 */
 	/* x2 <- line length offset */
 	/* x3 <- number of cache ways - 1 */
 	/* x4 <- number of cache sets - 1 */
@@ -45,11 +44,14 @@ loop_set:
 	mov	x6, x3			/* x6 <- working copy of #ways */
 loop_way:
 	lsl	x7, x6, x5
-	orr	x9, x1, x7		/* map way and level to cisw value */
+	orr	x9, x12, x7		/* map way and level to cisw value */
 	lsl	x7, x4, x2
 	orr	x9, x9, x7		/* map set number to cisw value */
-	dc	cisw, x9		/* clean & invalidate by set/way */
-	subs	x6, x6, #1		/* decrement the way */
+	tbz	w1, #0, 1f
+	dc	isw, x9
+	b	2f
+1:	dc	cisw, x9		/* clean & invalidate by set/way */
+2:	subs	x6, x6, #1		/* decrement the way */
 	b.ge	loop_way
 	subs	x4, x4, #1		/* decrement the set */
 	b.ge	loop_set
@@ -58,11 +60,14 @@ loop_way:
 ENDPROC(__asm_flush_dcache_level)
 
 /*
- * void __asm_flush_dcache_all(void)
+ * void __asm_flush_dcache_all(int invalidate_only)
+ *
+ * x0: 0 flush & invalidate, 1 invalidate only
  *
  * clean and invalidate all data cache by SET/WAY.
  */
-ENTRY(__asm_flush_dcache_all)
+ENTRY(__asm_dcache_all)
+	mov	x1, x0
 	dsb	sy
 	mrs	x10, clidr_el1		/* read clidr_el1 */
 	lsr	x11, x10, #24
@@ -76,13 +81,13 @@ ENTRY(__asm_flush_dcache_all)
 	/* x15 <- return address */
 
 loop_level:
-	lsl	x1, x0, #1
-	add	x1, x1, x0		/* x0 <- tripled cache level */
-	lsr	x1, x10, x1
-	and	x1, x1, #7		/* x1 <- cache type */
-	cmp	x1, #2
+	lsl	x12, x0, #1
+	add	x12, x12, x0		/* x0 <- tripled cache level */
+	lsr	x12, x10, x12
+	and	x12, x12, #7		/* x12 <- cache type */
+	cmp	x12, #2
 	b.lt	skip			/* skip if no cache or icache */
-	bl	__asm_flush_dcache_level
+	bl	__asm_flush_dcache_level	/* x1 = 0 flush, 1 invalidate */
 skip:
 	add	x0, x0, #1		/* increment cache level */
 	cmp	x11, x0
@@ -96,8 +101,24 @@ skip:
 
 finished:
 	ret
+ENDPROC(__asm_dcache_all)
+
+ENTRY(__asm_flush_dcache_all)
+	mov	x16, lr
+	mov	x0, #0
+	bl	__asm_dcache_all
+	mov	lr, x16
+	ret
 ENDPROC(__asm_flush_dcache_all)
 
+ENTRY(__asm_invalidate_dcache_all)
+	mov	x16, lr
+	mov	x0, #0xffff
+	bl	__asm_dcache_all
+	mov	lr, x16
+	ret
+ENDPROC(__asm_invalidate_dcache_all)
+
 /*
  * void __asm_flush_dcache_range(start, end)
  *

arch/arm/cpu/armv8/cache_v8.c

@@ -45,15 +45,31 @@ static void mmu_setup(void)
 
 	/* load TTBR0 */
 	el = current_el();
-	if (el == 1)
+	if (el == 1) {
 		asm volatile("msr ttbr0_el1, %0"
 			     : : "r" (gd->arch.tlb_addr) : "memory");
-	else if (el == 2)
+		asm volatile("msr tcr_el1, %0"
+			     : : "r" (TCR_FLAGS | TCR_EL1_IPS_BITS)
+			     : "memory");
+		asm volatile("msr mair_el1, %0"
+			     : : "r" (MEMORY_ATTRIBUTES) : "memory");
+	} else if (el == 2) {
 		asm volatile("msr ttbr0_el2, %0"
 			     : : "r" (gd->arch.tlb_addr) : "memory");
-	else
+		asm volatile("msr tcr_el2, %0"
+			     : : "r" (TCR_FLAGS | TCR_EL2_IPS_BITS)
+			     : "memory");
+		asm volatile("msr mair_el2, %0"
+			     : : "r" (MEMORY_ATTRIBUTES) : "memory");
+	} else {
 		asm volatile("msr ttbr0_el3, %0"
 			     : : "r" (gd->arch.tlb_addr) : "memory");
+		asm volatile("msr tcr_el3, %0"
+			     : : "r" (TCR_FLAGS | TCR_EL2_IPS_BITS)
+			     : "memory");
+		asm volatile("msr mair_el3, %0"
+			     : : "r" (MEMORY_ATTRIBUTES) : "memory");
+	}
 
 	/* enable the mmu */
 	set_sctlr(get_sctlr() | CR_M);
@@ -64,7 +80,7 @@ static void mmu_setup(void)
  */
 void invalidate_dcache_all(void)
 {
-	__asm_flush_dcache_all();
+	__asm_invalidate_dcache_all();
 }
 
 /*
@@ -161,6 +177,7 @@ int dcache_status(void)
 
 void icache_enable(void)
 {
+	__asm_invalidate_icache_all();
 	set_sctlr(get_sctlr() | CR_I);
 }
 

arch/arm/cpu/armv8/gic.S

@@ -1,106 +0,0 @@
-/*
- * GIC Initialization Routines.
- *
- * (C) Copyright 2013
- * David Feng <fenghua@phytium.com.cn>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <linux/linkage.h>
-#include <asm/macro.h>
-#include <asm/gic.h>
-
-
-/*************************************************************************
- *
- * void gic_init(void) __attribute__((weak));
- *
- * Currently, this routine only initialize secure copy of GIC
- * with Security Extensions at EL3.
- *
- *************************************************************************/
-WEAK(gic_init)
-	branch_if_slave	x0, 2f
-
-	/* Initialize Distributor and SPIs */
-	ldr	x1, =GICD_BASE
-	mov	w0, #0x3		/* EnableGrp0 | EnableGrp1 */
-	str	w0, [x1, GICD_CTLR]	/* Secure GICD_CTLR */
-	ldr	w0, [x1, GICD_TYPER]
-	and	w2, w0, #0x1f		/* ITLinesNumber */
-	cbz	w2, 2f			/* No SPIs */
-	add	x1, x1, (GICD_IGROUPRn + 4)
-	mov	w0, #~0			/* Config SPIs as Grp1 */
-1:	str	w0, [x1], #0x4
-	sub	w2, w2, #0x1
-	cbnz	w2, 1b
-
-	/* Initialize SGIs and PPIs */
-2:	ldr	x1, =GICD_BASE
-	mov	w0, #~0			/* Config SGIs and PPIs as Grp1 */
-	str	w0, [x1, GICD_IGROUPRn]	/* GICD_IGROUPR0 */
-	mov	w0, #0x1		/* Enable SGI 0 */
-	str	w0, [x1, GICD_ISENABLERn]
-
-	/* Initialize Cpu Interface */
-	ldr	x1, =GICC_BASE
-	mov	w0, #0x1e7		/* Disable IRQ/FIQ Bypass & */
-					/* Enable Ack Group1 Interrupt & */
-					/* EnableGrp0 & EnableGrp1 */
-	str	w0, [x1, GICC_CTLR]	/* Secure GICC_CTLR */
-
-	mov	w0, #0x1 << 7		/* Non-Secure access to GICC_PMR */
-	str	w0, [x1, GICC_PMR]
-
-	ret
-ENDPROC(gic_init)
-
-
-/*************************************************************************
- *
- * void gic_send_sgi(u64 sgi) __attribute__((weak));
- *
- *************************************************************************/
-WEAK(gic_send_sgi)
-	ldr	x1, =GICD_BASE
-	mov	w2, #0x8000
-	movk	w2, #0x100, lsl #16
-	orr	w2, w2, w0
-	str	w2, [x1, GICD_SGIR]
-	ret
-ENDPROC(gic_send_sgi)
-
-
-/*************************************************************************
- *
- * void wait_for_wakeup(void) __attribute__((weak));
- *
- * Wait for SGI 0 from master.
- *
- *************************************************************************/
-WEAK(wait_for_wakeup)
-	ldr	x1, =GICC_BASE
-0:	wfi
-	ldr	w0, [x1, GICC_AIAR]
-	str	w0, [x1, GICC_AEOIR]
-	cbnz	w0, 0b
-	ret
-ENDPROC(wait_for_wakeup)
-
-
-/*************************************************************************
- *
- * void smp_kick_all_cpus(void) __attribute__((weak));
- *
- *************************************************************************/
-WEAK(smp_kick_all_cpus)
-	/* Kick secondary cpus up by SGI 0 interrupt */
-	mov	x0, xzr			/* SGI 0 */
-	mov	x29, lr			/* Save LR */
-	bl	gic_send_sgi
-	mov	lr, x29			/* Restore LR */
-	ret
-ENDPROC(smp_kick_all_cpus)

arch/arm/cpu/armv8/start.S

@@ -50,7 +50,10 @@ reset:
 	 */
 	adr	x0, vectors
 	switch_el x1, 3f, 2f, 1f
-3:	msr	vbar_el3, x0
+3:	mrs	x0, scr_el3
+	orr	x0, x0, #0xf			/* SCR_EL3.NS|IRQ|FIQ|EA */
+	msr	scr_el3, x0
+	msr	vbar_el3, x0
 	msr	cptr_el3, xzr			/* Enable FP/SIMD */
 	ldr	x0, =COUNTER_FREQUENCY
 	msr	cntfrq_el0, x0			/* Initialize CNTFRQ */
@@ -64,10 +67,12 @@ reset:
 	msr	cpacr_el1, x0			/* Enable FP/SIMD */
 0:
 
-	/* Cache/BPB/TLB Invalidate */
-	bl	__asm_flush_dcache_all		/* dCache clean&invalidate */
-	bl	__asm_invalidate_icache_all	/* iCache invalidate */
-	bl	__asm_invalidate_tlb_all	/* invalidate TLBs */
+	/*
+	 * Cache/BPB/TLB Invalidate
+	 * i-cache is invalidated before enabled in icache_enable()
+	 * tlb is invalidated before mmu is enabled in dcache_enable()
+	 * d-cache is invalidated before enabled in dcache_enable()
+	 */
 
 	/* Processor specific initialization */
 	bl	lowlevel_init
@@ -93,63 +98,64 @@ master_cpu:
 /*-----------------------------------------------------------------------*/
 
 WEAK(lowlevel_init)
-	/* Initialize GIC Secure Bank Status */
 	mov	x29, lr			/* Save LR */
-	bl	gic_init
 
-	branch_if_master x0, x1, 1f
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	branch_if_slave x0, 1f
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+1:
+#if defined(CONFIG_GICV3)
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	ldr	x0, =GICD_BASE
+	ldr	x1, =GICC_BASE
+	bl	gic_init_secure_percpu
+#endif
+#endif
+
+	branch_if_master x0, x1, 2f
 
 	/*
 	 * Slave should wait for master clearing spin table.
 	 * This sync prevent salves observing incorrect
 	 * value of spin table and jumping to wrong place.
 	 */
-	bl	wait_for_wakeup
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+	ldr	x0, =GICC_BASE
+#endif
+	bl	gic_wait_for_interrupt
+#endif
 
 	/*
-	 * All processors will enter EL2 and optionally EL1.
+	 * All slaves will enter EL2 and optionally EL1.
 	 */
 	bl	armv8_switch_to_el2
 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
 	bl	armv8_switch_to_el1
 #endif
 
-1:
+2:
 	mov	lr, x29			/* Restore LR */
 	ret
 ENDPROC(lowlevel_init)
 
+WEAK(smp_kick_all_cpus)
+	/* Kick secondary cpus up by SGI 0 interrupt */
+	mov	x29, lr			/* Save LR */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	ldr	x0, =GICD_BASE
+	bl	gic_kick_secondary_cpus
+#endif
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(smp_kick_all_cpus)
+
 /*-----------------------------------------------------------------------*/
 
 ENTRY(c_runtime_cpu_setup)
-	/* If I-cache is enabled invalidate it */
-#ifndef CONFIG_SYS_ICACHE_OFF
-	ic	iallu			/* I+BTB cache invalidate */
-	isb	sy
-#endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-	/*
-	 * Setup MAIR and TCR.
-	 */
-	ldr	x0, =MEMORY_ATTRIBUTES
-	ldr	x1, =TCR_FLAGS
-
-	switch_el x2, 3f, 2f, 1f
-3:	orr	x1, x1, TCR_EL3_IPS_BITS
-	msr	mair_el3, x0
-	msr	tcr_el3, x1
-	b	0f
-2:	orr	x1, x1, TCR_EL2_IPS_BITS
-	msr	mair_el2, x0
-	msr	tcr_el2, x1
-	b	0f
-1:	orr	x1, x1, TCR_EL1_IPS_BITS
-	msr	mair_el1, x0
-	msr	tcr_el1, x1
-0:
-#endif
-
 	/* Relocate vBAR */
 	adr	x0, vectors
 	switch_el x1, 3f, 2f, 1f

arch/arm/cpu/tegra20-common/Makefile

@@ -9,7 +9,7 @@
 
 # The AVP is ARMv4T architecture so we must use special compiler
 # flags for any startup files it might use.
-CFLAGS_arch/arm/cpu/tegra20-common/warmboot_avp.o += -march=armv4t
+CFLAGS_warmboot_avp.o += -march=armv4t
 
 obj-y	+= clock.o funcmux.o pinmux.o
 obj-$(CONFIG_TEGRA_LP0) += warmboot.o crypto.o warmboot_avp.o

arch/arm/cpu/u-boot.lds

@@ -102,6 +102,7 @@ SECTIONS
 	.dynamic : { *(.dynamic*) }
 	.plt : { *(.plt*) }
 	.interp : { *(.interp*) }
+	.gnu.hash : { *(.gnu.hash) }
 	.gnu : { *(.gnu*) }
 	.ARM.exidx : { *(.ARM.exidx*) }
 	.gnu.linkonce.armexidx : { *(.gnu.linkonce.armexidx.*) }

arch/arm/dts/Makefile

@@ -1,7 +1,13 @@
+dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
+	exynos4210-universal_c210.dtb \
+	exynos4210-trats.dtb \
+	exynos4412-trats2.dtb
+
 dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5250-snow.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5420-smdk5420.dtb
+dtb-$(CONFIG_MX6) += imx6q-sabreauto.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \

arch/arm/dts/exynos4.dtsi

@@ -0,0 +1,138 @@
+/*
+ * Samsung's Exynos4 SoC common device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x3c>;
+		id = <0>;
+	};
+
+	serial@13810000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13810000 0x3c>;
+		id = <1>;
+	};
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x3c>;
+		id = <2>;
+	};
+
+	serial@13830000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13830000 0x3c>;
+		id = <3>;
+	};
+
+	serial@13840000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13840000 0x3c>;
+		id = <4>;
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <0 0 0>;
+	};
+
+	i2c@13870000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <1 1 0>;
+	};
+
+	i2c@13880000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <2 2 0>;
+	};
+
+	i2c@13890000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <3 3 0>;
+	};
+
+	i2c@138a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <4 4 0>;
+	};
+
+	i2c@138b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <5 5 0>;
+	};
+
+	i2c@138c0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <6 6 0>;
+	};
+
+	i2c@138d0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		interrupts = <7 7 0>;
+	};
+
+	sdhci@12510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-mmc";
+		reg = <0x12510000 0x1000>;
+		interrupts = <0 75 0>;
+	};
+
+	sdhci@12520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-mmc";
+		reg = <0x12520000 0x1000>;
+		interrupts = <0 76 0>;
+	};
+
+	sdhci@12530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-mmc";
+		reg = <0x12530000 0x1000>;
+		interrupts = <0 77 0>;
+	};
+
+	sdhci@12540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-mmc";
+		reg = <0x12540000 0x1000>;
+		interrupts = <0 78 0>;
+	};
+
+	gpio: gpio {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};

arch/arm/dts/exynos4210-origen.dts

@@ -0,0 +1,45 @@
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+/include/ "exynos4.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4210";
+	compatible = "insignal,origen", "samsung,exynos4210";
+
+	chosen {
+		bootargs ="";
+	};
+
+	aliases {
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+		mmc2 = "sdhci@12530000";
+	};
+
+	sdhci@12510000 {
+		status = "disabled";
+	};
+
+	sdhci@12520000 {
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		cd-gpios = <&gpio 0x2008002 0>;
+	};
+
+	sdhci@12540000 {
+		status = "disabled";
+	};
+};

arch/arm/dts/exynos4210-trats.dts

@@ -0,0 +1,120 @@
+/*
+ * Samsung's Exynos4210 based Trats board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos4.dtsi"
+
+/ {
+	model = "Samsung Trats based on Exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210";
+
+	config {
+		samsung,dsim-device-name = "s6e8ax0";
+	};
+
+	aliases {
+		i2c0 = "/i2c@13860000";
+		i2c1 = "/i2c@13870000";
+		i2c2 = "/i2c@13880000";
+		i2c3 = "/i2c@13890000";
+		i2c4 = "/i2c@138a0000";
+		i2c5 = "/i2c@138b0000";
+		i2c6 = "/i2c@138c0000";
+		i2c7 = "/i2c@138d0000";
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+		mmc0 = "sdhci@12510000";
+		mmc2 = "sdhci@12530000";
+	};
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos-fimd";
+		reg = <0x11c00000 0xa4>;
+
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <720>;
+		samsung,vl-row = <1280>;
+		samsung,vl-width = <720>;
+		samsung,vl-height = <1280>;
+
+		samsung,vl-clkp = <0>;
+		samsung,vl-oep = <0>;
+		samsung,vl-hsp = <1>;
+		samsung,vl-vsp = <1>;
+		samsung,vl-dp = <1>;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <5>;
+		samsung,vl-hbpd = <10>;
+		samsung,vl-hfpd = <10>;
+		samsung,vl-vspw = <2>;
+		samsung,vl-vbpd = <1>;
+		samsung,vl-vfpd = <13>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,power-on-delay = <30>;
+		samsung,interface-mode = <1>;
+		samsung,mipi-enabled = <1>;
+		samsung,dp-enabled;
+		samsung,dual-lcd-enabled;
+
+		samsung,logo-on = <1>;
+		samsung,resolution = <0>;
+		samsung,rgb-mode = <0>;
+	};
+
+	mipidsi@11c80000 {
+		compatible = "samsung,exynos-mipi-dsi";
+		reg = <0x11c80000 0x5c>;
+
+		samsung,dsim-config-e-interface = <1>;
+		samsung,dsim-config-e-virtual-ch = <0>;
+		samsung,dsim-config-e-pixel-format = <7>;
+		samsung,dsim-config-e-burst-mode = <1>;
+		samsung,dsim-config-e-no-data-lane = <3>;
+		samsung,dsim-config-e-byte-clk = <0>;
+		samsung,dsim-config-hfp = <1>;
+
+		samsung,dsim-config-p = <3>;
+		samsung,dsim-config-m = <120>;
+		samsung,dsim-config-s = <1>;
+
+		samsung,dsim-config-pll-stable-time = <500>;
+		samsung,dsim-config-esc-clk = <20000000>;
+		samsung,dsim-config-stop-holding-cnt = <0x7ff>;
+		samsung,dsim-config-bta-timeout = <0xff>;
+		samsung,dsim-config-rx-timeout = <0xffff>;
+
+		samsung,dsim-device-id = <0xffffffff>;
+		samsung,dsim-device-bus-id = <0>;
+
+		samsung,dsim-device-reverse-panel = <1>;
+	};
+
+	sdhci@12510000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		pwr-gpios = <&gpio 0x2008002 0>;
+	};
+
+	sdhci@12520000 {
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		cd-gpios = <&gpio 0x20c6004 0>;
+	};
+
+	sdhci@12540000 {
+		status = "disabled";
+	};
+};

arch/arm/dts/exynos4210-universal_c210.dts

@@ -0,0 +1,83 @@
+/*
+ * Samsung's Exynos4210 based Universal C210 board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos4.dtsi"
+
+/ {
+	model = "Samsung Universal C210 based on Exynos4210 rev0";
+	compatible = "samsung,universal_c210", "samsung,exynos4210";
+
+	aliases {
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+		mmc0 = "sdhci@12510000";
+		mmc2 = "sdhci@12530000";
+	};
+
+	sdhci@12510000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		pwr-gpios = <&gpio 0x2008002 0>;
+	};
+
+	sdhci@12520000 {
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		cd-gpios = <&gpio 0x20c6004 0>;
+	};
+
+	sdhci@12540000 {
+		status = "disabled";
+	};
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos-fimd";
+		reg = <0x11c00000 0xa4>;
+
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <480>;
+		samsung,vl-row = <800>;
+		samsung,vl-width = <480>;
+		samsung,vl-height = <800>;
+
+		samsung,vl-clkp = <0>;
+		samsung,vl-oep = <0>;
+		samsung,vl-hsp = <1>;
+		samsung,vl-vsp = <1>;
+		samsung,vl-dp = <1>;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <2>;
+		samsung,vl-hbpd = <16>;
+		samsung,vl-hfpd = <16>;
+		samsung,vl-vspw = <2>;
+		samsung,vl-vbpd = <8>;
+		samsung,vl-vfpd = <8>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,pclk_name = <1>;
+		samsung,sclk_div = <1>;
+
+		samsung,winid = <0>;
+		samsung,power-on-delay = <10000>;
+		samsung,interface-mode = <1>;
+		samsung,mipi-enabled = <0>;
+		samsung,dp-enabled;
+		samsung,dual-lcd-enabled;
+
+		samsung,logo-on = <1>;
+		samsung,resolution = <0>;
+		samsung,rgb-mode = <0>;
+	};
+};

arch/arm/dts/exynos4412-trats2.dts

@@ -0,0 +1,434 @@
+/*
+ * Samsung's Exynos4412 based Trats2 board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos4.dtsi"
+
+/ {
+	model = "Samsung Trats2 based on Exynos4412";
+	compatible = "samsung,trats2", "samsung,exynos4412";
+
+	config {
+		samsung,dsim-device-name = "s6e8ax0";
+	};
+
+	aliases {
+		i2c0 = "/i2c@13860000";
+		i2c1 = "/i2c@13870000";
+		i2c2 = "/i2c@13880000";
+		i2c3 = "/i2c@13890000";
+		i2c4 = "/i2c@138a0000";
+		i2c5 = "/i2c@138b0000";
+		i2c6 = "/i2c@138c0000";
+		i2c7 = "/i2c@138d0000";
+		serial0 = "/serial@13800000";
+		console = "/serial@13820000";
+		mmc0 = "sdhci@12510000";
+		mmc2 = "sdhci@12530000";
+	};
+
+	i2c@138d0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		status = "okay";
+
+		max77686_pmic@09 {
+			compatible = "maxim,max77686_pmic";
+			interrupts = <7 0>;
+			reg = <0x09 0 0>;
+			#clock-cells = <1>;
+
+			voltage-regulators {
+				ldo1_reg: ldo1 {
+					regulator-compatible = "LDO1";
+					regulator-name = "VALIVE_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-compatible = "LDO2";
+					regulator-name = "VM1M2_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-compatible = "LDO3";
+					regulator-name = "VCC_1.8V_AP";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-compatible = "LDO4";
+					regulator-name = "VCC_2.8V_AP";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-compatible = "LDO5";
+					regulator-name = "VCC_1.8V_IO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-compatible = "LDO6";
+					regulator-name = "VMPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-compatible = "LDO7";
+					regulator-name = "VPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VMIPI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-mem-off;
+				};
+
+				ldo9_reg: ldo9 {
+					regulator-compatible = "LDO9";
+					regulator-name = "CAM_ISP_MIPI_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-idle;
+				};
+
+				ldo10_reg: ldo10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-off;
+				};
+
+				ldo11_reg: ldo11 {
+					regulator-compatible = "LDO11";
+					regulator-name = "VABB1_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo12_reg: ldo12 {
+					regulator-compatible = "LDO12";
+					regulator-name = "VUOTG_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-mem-off;
+				};
+
+				ldo13_reg: ldo13 {
+					regulator-compatible = "LDO13";
+					regulator-name = "NFC_AVDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo14_reg: ldo14 {
+					regulator-compatible = "LDO14";
+					regulator-name = "VABB2_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo15_reg: ldo15 {
+					regulator-compatible = "LDO15";
+					regulator-name = "VHSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-mem-off;
+				};
+
+				ldo16_reg: ldo16 {
+					regulator-compatible = "LDO16";
+					regulator-name = "VHSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-off;
+				};
+
+				ldo17_reg: ldo17 {
+					regulator-compatible = "LDO17";
+					regulator-name = "CAM_SENSOR_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-idle;
+				};
+
+				ldo18_reg: ldo18 {
+					regulator-compatible = "LDO18";
+					regulator-name = "CAM_ISP_SEN_IO_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo19_reg: ldo19 {
+					regulator-compatible = "LDO19";
+					regulator-name = "VT_CAM_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo20_reg: ldo20 {
+					regulator-compatible = "LDO20";
+					regulator-name = "VDDQ_PRE_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo21_reg: ldo21 {
+					regulator-compatible = "LDO21";
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-mem-idle;
+				};
+
+				ldo22_reg: ldo22 {
+					regulator-compatible = "LDO22";
+					regulator-name = "VMEM_VDD_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo23_reg: ldo23 {
+					regulator-compatible = "LDO23";
+					regulator-name = "TSP_AVDD_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-mem-idle;
+				};
+
+				ldo24_reg: ldo24 {
+					regulator-compatible = "LDO24";
+					regulator-name = "TSP_VDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo25_reg: ldo25 {
+					regulator-compatible = "LDO25";
+					regulator-name = "LCD_VCC_3.3V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-mem-idle;
+				};
+
+				ldo26_reg: ldo26 {
+					regulator-compatible = "LDO26";
+					regulator-name = "MOTOR_VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-mem-idle;
+				};
+
+				buck1_reg: buck1 {
+					regulator-compatible = "BUCK1";
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck2_reg: buck2 {
+					regulator-compatible = "BUCK2";
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck3_reg: buck3 {
+					regulator-compatible = "BUCK3";
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck4_reg: buck4 {
+					regulator-compatible = "BUCK4";
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck5_reg: buck5 {
+					regulator-compatible = "BUCK5";
+					regulator-name = "VMEM_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck6_reg: buck6 {
+					regulator-compatible = "BUCK6";
+					regulator-name = "VCC_SUB_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: buck7 {
+					regulator-compatible = "BUCK7";
+					regulator-name = "VCC_SUB_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: buck8 {
+					regulator-compatible = "BUCK8";
+					regulator-name = "VMEM_VDDF_3.0V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				buck9_reg: buck9 {
+					regulator-compatible = "BUCK9";
+					regulator-name = "CAM_ISP_CORE_1.2V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-off;
+				};
+			};
+		};
+	};
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos-fimd";
+		reg = <0x11c00000 0xa4>;
+
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <720>;
+		samsung,vl-row = <1280>;
+		samsung,vl-width = <720>;
+		samsung,vl-height = <1280>;
+
+		samsung,vl-clkp = <0>;
+		samsung,vl-oep = <0>;
+		samsung,vl-hsp = <1>;
+		samsung,vl-vsp = <1>;
+		samsung,vl-dp = <1>;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <5>;
+		samsung,vl-hbpd = <10>;
+		samsung,vl-hfpd = <10>;
+		samsung,vl-vspw = <2>;
+		samsung,vl-vbpd = <1>;
+		samsung,vl-vfpd = <13>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <0>;
+		samsung,power-on-delay = <30>;
+		samsung,interface-mode = <1>;
+		samsung,mipi-enabled = <1>;
+		samsung,dp-enabled;
+		samsung,dual-lcd-enabled;
+
+		samsung,logo-on = <1>;
+		samsung,resolution = <0>;
+		samsung,rgb-mode = <0>;
+	};
+
+	mipidsi@11c80000 {
+		compatible = "samsung,exynos-mipi-dsi";
+		reg = <0x11c80000 0x5c>;
+
+		samsung,dsim-config-e-interface = <1>;
+		samsung,dsim-config-e-virtual-ch = <0>;
+		samsung,dsim-config-e-pixel-format = <7>;
+		samsung,dsim-config-e-burst-mode = <1>;
+		samsung,dsim-config-e-no-data-lane = <3>;
+		samsung,dsim-config-e-byte-clk = <0>;
+		samsung,dsim-config-hfp = <1>;
+
+		samsung,dsim-config-p = <3>;
+		samsung,dsim-config-m = <120>;
+		samsung,dsim-config-s = <1>;
+
+		samsung,dsim-config-pll-stable-time = <500>;
+		samsung,dsim-config-esc-clk = <20000000>;
+		samsung,dsim-config-stop-holding-cnt = <0x7ff>;
+		samsung,dsim-config-bta-timeout = <0xff>;
+		samsung,dsim-config-rx-timeout = <0xffff>;
+
+		samsung,dsim-device-id = <0xffffffff>;
+		samsung,dsim-device-bus-id = <0>;
+
+		samsung,dsim-device-reverse-panel = <1>;
+	};
+
+	sdhci@12510000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		pwr-gpios = <&gpio 0x2004002 0>;
+	};
+
+	sdhci@12520000 {
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		cd-gpios = <&gpio 0x20C6004 0>;
+	};
+
+	sdhci@12540000 {
+		status = "disabled";
+	};
+};

arch/arm/dts/imx6q-sabreauto.dts

@@ -0,0 +1,13 @@
+/*
+    + * Copyright 2012 Freescale Semiconductor, Inc.
+    + * Copyright 2011 Linaro Ltd.
+    + *
+    + * SPDX-License-Identifier:     GPL-2.0+
+    + */
+
+/dts-v1/;
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};

arch/arm/imx-common/Makefile

@@ -32,7 +32,7 @@ $(IMX_CONFIG): %.cfgtmp: % FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,cpp_cfg)
 
-quiet_cmd_mkimage = UIMAGE  $@
+quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
 
@@ -42,6 +42,14 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $< $(PHONY),$^) -T imximage \
 u-boot.imx: u-boot.bin $(IMX_CONFIG) FORCE
 	$(call if_changed,mkimage)
 
+ifeq ($(CONFIG_OF_SEPARATE),y)
+MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $< $(PHONY),$^) -T imximage \
+	-e $(CONFIG_SYS_TEXT_BASE)
+
+u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) FORCE
+	$(call if_changed,mkimage)
+endif
+
 MKIMAGEFLAGS_SPL = -n $(filter-out $< $(PHONY),$^) -T imximage \
 	-e $(CONFIG_SPL_TEXT_BASE)
 

arch/arm/include/asm/arch-am33xx/spl.h

@@ -5,7 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
 #if defined(CONFIG_TI816X)
 #define BOOT_DEVICE_XIP		2

arch/arm/include/asm/arch-davinci/sdmmc_defs.h

@@ -151,6 +151,7 @@ struct davinci_mmc {
 	uint host_caps;		/* Host capabilities */
 	uint voltages;		/* Host supported voltages */
 	uint version;		/* MMC Controller version */
+	struct mmc_config cfg;
 };
 
 enum {

arch/arm/include/asm/arch-davinci/spl.h

@@ -5,7 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
 #define BOOT_DEVICE_NAND	1
 #define BOOT_DEVICE_SPI		2

arch/arm/include/asm/arch-exynos/board.h

@@ -14,4 +14,16 @@
  */
 int exynos_init(void);
 
+/*
+ * Exynos board specific changes for
+ * board_early_init_f
+ */
+int exynos_early_init_f(void);
+
+/*
+ * Exynos board specific changes for
+ * board_power_init
+ */
+int exynos_power_init(void);
+
 #endif	/* EXYNOS_BOARD_H */

arch/arm/include/asm/arch-exynos/cpu.h

@@ -25,8 +25,9 @@
 #define EXYNOS4_SYSTIMER_BASE		0x10050000
 #define EXYNOS4_WATCHDOG_BASE		0x10060000
 #define EXYNOS4_TZPC_BASE		0x10110000
-#define EXYNOS4_MIU_BASE		0x10600000
 #define EXYNOS4_DMC_CTRL_BASE		0x10400000
+#define EXYNOS4_MIU_BASE		0x10600000
+#define EXYNOS4_ACE_SFR_BASE		0x10830000
 #define EXYNOS4_GPIO_PART2_BASE		0x11000000
 #define EXYNOS4_GPIO_PART1_BASE		0x11400000
 #define EXYNOS4_FIMD_BASE		0x11C00000
@@ -48,7 +49,6 @@
 #define EXYNOS4_GPIO_PART4_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_DP_BASE			DEVICE_NOT_AVAILABLE
 #define EXYNOS4_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
-#define EXYNOS4_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
@@ -68,6 +68,7 @@
 #define EXYNOS4X12_TZPC_BASE		0x10110000
 #define EXYNOS4X12_DMC_CTRL_BASE	0x10600000
 #define EXYNOS4X12_GPIO_PART4_BASE	0x106E0000
+#define EXYNOS4X12_ACE_SFR_BASE		0x10830000
 #define EXYNOS4X12_GPIO_PART2_BASE	0x11000000
 #define EXYNOS4X12_GPIO_PART1_BASE	0x11400000
 #define EXYNOS4X12_FIMD_BASE		0x11C00000
@@ -87,7 +88,6 @@
 #define EXYNOS4X12_I2S_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_SPI_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
-#define EXYNOS4X12_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
@@ -106,7 +106,7 @@
 #define EXYNOS5_SYSREG_BASE		0x10050000
 #define EXYNOS5_TZPC_BASE		0x10100000
 #define EXYNOS5_WATCHDOG_BASE		0x101D0000
-#define EXYNOS5_ACE_SFR_BASE            0x10830000
+#define EXYNOS5_ACE_SFR_BASE		0x10830000
 #define EXYNOS5_DMC_PHY_BASE		0x10C00000
 #define EXYNOS5_GPIO_PART3_BASE		0x10D10000
 #define EXYNOS5_DMC_CTRL_BASE		0x10DD0000

arch/arm/include/asm/arch-exynos/mipi_dsim.h

@@ -12,6 +12,7 @@
 
 #include <linux/list.h>
 #include <linux/fb.h>
+#include <lcd.h>
 
 #define PANEL_NAME_SIZE		(32)
 
@@ -368,8 +369,12 @@ int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
 						*lcd_dev);
 
 void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd);
+void exynos_init_dsim_platform_data(vidinfo_t *vid);
 
 /* panel driver init based on mipi dsi interface */
 void s6e8ax0_init(void);
 
+#ifdef CONFIG_OF_CONTROL
+extern int mipi_power(void);
+#endif
 #endif /* _DSIM_H */

arch/arm/include/asm/arch-exynos/mmc.h

@@ -53,6 +53,8 @@
 #define SDHCI_CTRL4_DRIVE_MASK(_x)	((_x) << 16)
 #define SDHCI_CTRL4_DRIVE_SHIFT		(16)
 
+#define SDHCI_MAX_HOSTS 4
+
 int s5p_sdhci_init(u32 regbase, int index, int bus_width);
 
 static inline int s5p_mmc_init(int index, int bus_width)
@@ -62,4 +64,9 @@ static inline int s5p_mmc_init(int index, int bus_width)
 
 	return s5p_sdhci_init(base, index, bus_width);
 }
+
+#ifdef CONFIG_OF_CONTROL
+int exynos_mmc_init(const void *blob);
+#endif
+
 #endif

arch/arm/include/asm/arch-kirkwood/config.h

@@ -38,7 +38,7 @@
  * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
  */
 #ifndef CONFIG_SYS_KWD_CONFIG
-#define	CONFIG_SYS_KWD_CONFIG	$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
+#define	CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
 #endif /* CONFIG_SYS_KWD_CONFIG */
 
 /* Kirkwood has 2k of Security SRAM, use it for SP */

arch/arm/include/asm/arch-mx35/spl.h

@@ -5,7 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
 #define BOOT_DEVICE_NONE	0
 #define BOOT_DEVICE_XIP		1

arch/arm/include/asm/arch-omap3/spl.h

@@ -5,7 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
 #define BOOT_DEVICE_NONE	0
 #define BOOT_DEVICE_XIP		1

arch/arm/include/asm/arch-omap4/spl.h

@@ -5,7 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
 #define BOOT_DEVICE_NONE	0
 #define BOOT_DEVICE_XIP		1

arch/arm/include/asm/arch-omap5/spl.h

@@ -5,7 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
 #define BOOT_DEVICE_NONE        0
 #define BOOT_DEVICE_XIP         1

arch/arm/include/asm/arch-socfpga/clock_manager.h

@@ -0,0 +1,205 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	_CLOCK_MANAGER_H_
+#define	_CLOCK_MANAGER_H_
+
+typedef struct {
+	/* main group */
+	uint32_t main_vco_base;
+	uint32_t mpuclk;
+	uint32_t mainclk;
+	uint32_t dbgatclk;
+	uint32_t mainqspiclk;
+	uint32_t mainnandsdmmcclk;
+	uint32_t cfg2fuser0clk;
+	uint32_t maindiv;
+	uint32_t dbgdiv;
+	uint32_t tracediv;
+	uint32_t l4src;
+
+	/* peripheral group */
+	uint32_t peri_vco_base;
+	uint32_t emac0clk;
+	uint32_t emac1clk;
+	uint32_t perqspiclk;
+	uint32_t pernandsdmmcclk;
+	uint32_t perbaseclk;
+	uint32_t s2fuser1clk;
+	uint32_t perdiv;
+	uint32_t gpiodiv;
+	uint32_t persrc;
+
+	/* sdram pll group */
+	uint32_t sdram_vco_base;
+	uint32_t ddrdqsclk;
+	uint32_t ddr2xdqsclk;
+	uint32_t ddrdqclk;
+	uint32_t s2fuser2clk;
+} cm_config_t;
+
+extern void cm_basic_init(const cm_config_t *cfg);
+
+struct socfpga_clock_manager {
+	u32	ctrl;
+	u32	bypass;
+	u32	inter;
+	u32	intren;
+	u32	dbctrl;
+	u32	stat;
+	u32	_pad_0x18_0x3f[10];
+	u32	mainpllgrp;
+	u32	perpllgrp;
+	u32	sdrpllgrp;
+	u32	_pad_0xe0_0x200[72];
+
+	u32	main_pll_vco;
+	u32	main_pll_misc;
+	u32	main_pll_mpuclk;
+	u32	main_pll_mainclk;
+	u32	main_pll_dbgatclk;
+	u32	main_pll_mainqspiclk;
+	u32	main_pll_mainnandsdmmcclk;
+	u32	main_pll_cfgs2fuser0clk;
+	u32	main_pll_en;
+	u32	main_pll_maindiv;
+	u32	main_pll_dbgdiv;
+	u32	main_pll_tracediv;
+	u32	main_pll_l4src;
+	u32	main_pll_stat;
+	u32	main_pll__pad_0x38_0x40[2];
+
+	u32	per_pll_vco;
+	u32	per_pll_misc;
+	u32	per_pll_emac0clk;
+	u32	per_pll_emac1clk;
+	u32	per_pll_perqspiclk;
+	u32	per_pll_pernandsdmmcclk;
+	u32	per_pll_perbaseclk;
+	u32	per_pll_s2fuser1clk;
+	u32	per_pll_en;
+	u32	per_pll_div;
+	u32	per_pll_gpiodiv;
+	u32	per_pll_src;
+	u32	per_pll_stat;
+	u32	per_pll__pad_0x34_0x40[3];
+
+	u32	sdr_pll_vco;
+	u32	sdr_pll_ctrl;
+	u32	sdr_pll_ddrdqsclk;
+	u32	sdr_pll_ddr2xdqsclk;
+	u32	sdr_pll_ddrdqclk;
+	u32	sdr_pll_s2fuser2clk;
+	u32	sdr_pll_en;
+	u32	sdr_pll_stat;
+};
+
+#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK 0x00000200
+#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK 0x00000080
+#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK 0x00000040
+#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK 0x00000020
+#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK 0x00000010
+#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK 0x00000004
+#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
+#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
+#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_SET(x) (((x) << 4) & 0x00000070)
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_SET(x)  (((x) << 7) & 0x00000380)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_SET(x) (((x) << 0) & 0x00000001)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_SET(x) (((x) << 1) & 0x00000002)
+#define CLKMGR_PERPLLGRP_SRC_QSPI_SET(x) (((x) << 4) & 0x00000030)
+#define CLKMGR_PERPLLGRP_SRC_NAND_SET(x) (((x) << 2) & 0x0000000c)
+#define CLKMGR_PERPLLGRP_SRC_SDMMC_SET(x) (((x) << 0) & 0x00000003)
+#define CLKMGR_MAINPLLGRP_VCO_DENOM_SET(x) (((x) << 16) & 0x003f0000)
+#define CLKMGR_MAINPLLGRP_VCO_NUMER_SET(x) (((x) << 3) & 0x0000fff8)
+#define CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(x) (((x) << 2) & 0x00000004)
+#define CLKMGR_MAINPLLGRP_VCO_EN_SET(x) (((x) << 1) & 0x00000002)
+#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(x) (((x) << 0) & 0x00000001)
+#define CLKMGR_PERPLLGRP_VCO_PSRC_SET(x) (((x) << 22) & 0x00c00000)
+#define CLKMGR_PERPLLGRP_VCO_DENOM_SET(x) (((x) << 16) & 0x003f0000)
+#define CLKMGR_PERPLLGRP_VCO_NUMER_SET(x) (((x) << 3) & 0x0000fff8)
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(x) (((x) << 25) & 0x7e000000)
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(x) (((x) << 24) & 0x01000000)
+#define CLKMGR_SDRPLLGRP_VCO_SSRC_SET(x) (((x) << 22) & 0x00c00000)
+#define CLKMGR_SDRPLLGRP_VCO_DENOM_SET(x) (((x) << 16) & 0x003f0000)
+#define CLKMGR_SDRPLLGRP_VCO_NUMER_SET(x) (((x) << 3) & 0x0000fff8)
+#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_SET(x) \
+	(((x) << 0) & 0x000001ff)
+#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_SET(x) \
+	(((x) << 0) & 0x000001ff)
+#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_SET(x) (((x) << 2) & 0x0000000c)
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_SET(x) (((x) << 0) & 0x00000003)
+#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_SET(x) (((x) << 0) & 0x00000007)
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_SET(x) (((x) << 0) & 0x00000003)
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_SET(x) (((x) << 2) & 0x0000000c)
+#define CLKMGR_BYPASS_PERPLL_SET(x) (((x) << 3) & 0x00000008)
+#define CLKMGR_BYPASS_SDRPLL_SET(x) (((x) << 1) & 0x00000002)
+#define CLKMGR_BYPASS_MAINPLL_SET(x) (((x) << 0) & 0x00000001)
+#define CLKMGR_PERPLLGRP_DIV_USBCLK_SET(x) (((x) << 0) & 0x00000007)
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_SET(x) (((x) << 3) & 0x00000038)
+#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_SET(x) (((x) << 6) & 0x000001c0)
+#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_SET(x) (((x) << 9) & 0x00000e00)
+#define CLKMGR_INTER_SDRPLLLOCKED_MASK 0x00000100
+#define CLKMGR_INTER_PERPLLLOCKED_MASK 0x00000080
+#define CLKMGR_INTER_MAINPLLLOCKED_MASK 0x00000040
+#define CLKMGR_CTRL_SAFEMODE_MASK 0x00000001
+#define CLKMGR_CTRL_SAFEMODE_SET(x) (((x) << 0) & 0x00000001)
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(x) (((x) << 24) & 0x01000000)
+#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_SET(x) (((x) << 3) & 0x00000038)
+#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_SET(x) (((x) << 0) & 0x00ffffff)
+#define CLKMGR_BYPASS_PERPLLSRC_SET(x) (((x) << 4) & 0x00000010)
+#define CLKMGR_BYPASS_SDRPLLSRC_SET(x) (((x) << 2) & 0x00000004)
+#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
+#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
+#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x001ffe00
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x001ffe00
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x001ffe00
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x001ffe00
+#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
+#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
+#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
+
+#define MAIN_VCO_BASE \
+	(CLKMGR_MAINPLLGRP_VCO_DENOM_SET(CONFIG_HPS_MAINPLLGRP_VCO_DENOM) | \
+	CLKMGR_MAINPLLGRP_VCO_NUMER_SET(CONFIG_HPS_MAINPLLGRP_VCO_NUMER))
+
+#define PERI_VCO_BASE \
+	(CLKMGR_PERPLLGRP_VCO_PSRC_SET(CONFIG_HPS_PERPLLGRP_VCO_PSRC) | \
+	CLKMGR_PERPLLGRP_VCO_DENOM_SET(CONFIG_HPS_PERPLLGRP_VCO_DENOM) | \
+	CLKMGR_PERPLLGRP_VCO_NUMER_SET(CONFIG_HPS_PERPLLGRP_VCO_NUMER))
+
+#define SDR_VCO_BASE \
+	(CLKMGR_SDRPLLGRP_VCO_SSRC_SET(CONFIG_HPS_SDRPLLGRP_VCO_SSRC) | \
+	CLKMGR_SDRPLLGRP_VCO_DENOM_SET(CONFIG_HPS_SDRPLLGRP_VCO_DENOM) | \
+	CLKMGR_SDRPLLGRP_VCO_NUMER_SET(CONFIG_HPS_SDRPLLGRP_VCO_NUMER))
+
+#endif /* _CLOCK_MANAGER_H_ */

arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h

@@ -11,6 +11,7 @@
 #define SOCFPGA_UART0_ADDRESS 0xffc02000
 #define SOCFPGA_UART1_ADDRESS 0xffc03000
 #define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
+#define SOCFPGA_CLKMGR_ADDRESS 0xffd04000
 #define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
 #define SOCFPGA_SYSMGR_ADDRESS 0xffd08000
 

arch/arm/include/asm/arch-tegra/tegra_mmc.h

@@ -11,6 +11,9 @@
 
 #include <fdtdec.h>
 
+/* for mmc_config definition */
+#include <mmc.h>
+
 #define MAX_HOSTS		4	/* Max number of 'hosts'/controllers */
 
 #ifndef __ASSEMBLY__
@@ -138,6 +141,7 @@ struct mmc_host {
 	struct fdt_gpio_state wp_gpio;		/* Write Protect GPIO */
 	unsigned int version;	/* SDHCI spec. version */
 	unsigned int clock;	/* Current clock (MHz) */
+	struct mmc_config cfg;	/* mmc configuration */
 };
 
 void pad_init_mmc(struct mmc_host *host);

arch/arm/include/asm/arch-vf610/crm_regs.h

@@ -55,57 +55,59 @@ struct ccm_reg {
 
 /* Analog components control digital interface (ANADIG) */
 struct anadig_reg {
+	u32 reserved_0x000[4];
 	u32 pll3_ctrl;
-	u32 resv0[3];
+	u32 reserved_0x014[3];
 	u32 pll7_ctrl;
-	u32 resv1[3];
+	u32 reserved_0x024[3];
 	u32 pll2_ctrl;
-	u32 resv2[3];
+	u32 reserved_0x034[3];
 	u32 pll2_ss;
-	u32 resv3[3];
+	u32 reserved_0x044[3];
 	u32 pll2_num;
-	u32 resv4[3];
+	u32 reserved_0x054[3];
 	u32 pll2_denom;
-	u32 resv5[3];
+	u32 reserved_0x064[3];
 	u32 pll4_ctrl;
-	u32 resv6[3];
+	u32 reserved_0x074[3];
 	u32 pll4_num;
-	u32 resv7[3];
+	u32 reserved_0x084[3];
 	u32 pll4_denom;
+	u32 reserved_0x094[3];
 	u32 pll6_ctrl;
-	u32 resv8[3];
+	u32 reserved_0x0A4[3];
 	u32 pll6_num;
-	u32 resv9[3];
+	u32 reserved_0x0B4[3];
 	u32 pll6_denom;
-	u32 resv10[3];
+	u32 reserved_0x0C4[7];
 	u32 pll5_ctrl;
-	u32 resv11[3];
+	u32 reserved_0x0E4[3];
 	u32 pll3_pfd;
-	u32 resv12[3];
+	u32 reserved_0x0F4[3];
 	u32 pll2_pfd;
-	u32 resv13[3];
+	u32 reserved_0x104[3];
 	u32 reg_1p1;
-	u32 resv14[3];
+	u32 reserved_0x114[3];
 	u32 reg_3p0;
-	u32 resv15[3];
+	u32 reserved_0x124[3];
 	u32 reg_2p5;
-	u32 resv16[7];
+	u32 reserved_0x134[7];
 	u32 ana_misc0;
-	u32 resv17[3];
+	u32 reserved_0x154[3];
 	u32 ana_misc1;
-	u32 resv18[63];
+	u32 reserved_0x164[63];
 	u32 anadig_digprog;
-	u32 resv19[3];
+	u32 reserved_0x264[3];
 	u32 pll1_ctrl;
-	u32 resv20[3];
+	u32 reserved_0x274[3];
 	u32 pll1_ss;
-	u32 resv21[3];
+	u32 reserved_0x284[3];
 	u32 pll1_num;
-	u32 resv22[3];
+	u32 reserved_0x294[3];
 	u32 pll1_denom;
-	u32 resv23[3];
+	u32 reserved_0x2A4[3];
 	u32 pll1_pdf;
-	u32 resv24[3];
+	u32 reserved_0x2B4[3];
 	u32 pll_lock;
 };
 #endif
@@ -164,6 +166,7 @@ struct anadig_reg {
 #define CCM_CSCMR2_RMII_CLK_SEL(v)		(((v) & 0x3) << 4)
 
 #define CCM_REG_CTRL_MASK			0xffffffff
+#define CCM_CCGR0_UART0_CTRL_MASK               (0x3 << 14)
 #define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
 #define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
@@ -184,6 +187,10 @@ struct anadig_reg {
 #define CCM_CCGR9_FEC0_CTRL_MASK		0x3
 #define CCM_CCGR9_FEC1_CTRL_MASK		(0x3 << 2)
 
+#define ANADIG_PLL5_CTRL_BYPASS                 (1 << 16)
+#define ANADIG_PLL5_CTRL_ENABLE                 (1 << 13)
+#define ANADIG_PLL5_CTRL_POWERDOWN              (1 << 12)
+#define ANADIG_PLL5_CTRL_DIV_SELECT		1
 #define ANADIG_PLL2_CTRL_ENABLE			(1 << 13)
 #define ANADIG_PLL2_CTRL_POWERDOWN		(1 << 12)
 #define ANADIG_PLL2_CTRL_DIV_SELECT		1

arch/arm/include/asm/arch-vf610/imx-regs.h

@@ -85,6 +85,7 @@
 #define ESDHC0_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00031000)
 #define ESDHC1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00032000)
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
+#define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
 
 /* MUX mode and PAD ctrl are in one register */
 #define CONFIG_IOMUX_SHARE_CONF_REG

arch/arm/include/asm/arch-vf610/iomux-vf610.h

@@ -22,8 +22,11 @@
 
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTA6__RMII0_CLKOUT		= IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTB4__UART1_TX		= IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0, VF610_UART_PAD_CTRL),
 	VF610_PAD_PTB5__UART1_RX		= IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTB10__UART0_TX		= IOMUX_PAD(0x0080, 0x0080, 1, __NA_, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTB11__UART0_RX		= IOMUX_PAD(0x0084, 0x0084, 1, __NA_, 0, VF610_UART_PAD_CTRL),
 	VF610_PAD_PTC1__RMII0_MDIO		= IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTC0__RMII0_MDC		= IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTC2__RMII0_CRS_DV		= IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -33,6 +36,15 @@ enum {
 	VF610_PAD_PTC6__RMII0_TD1		= IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTC7__RMII0_TD0		= IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTC8__RMII0_TXEN		= IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC10__RMII1_MDIO		= IOMUX_PAD(0x00dc, 0x00dc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC9__RMII1_MDC		= IOMUX_PAD(0x00d8, 0x00d8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC11__RMII1_CRS_DV		= IOMUX_PAD(0x00e0, 0x00e0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC12__RMII1_RD1		= IOMUX_PAD(0x00e4, 0x00e4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC13__RMII1_RD0		= IOMUX_PAD(0x00e8, 0x00e8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC14__RMII1_RXER		= IOMUX_PAD(0x00ec, 0x00ec, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC15__RMII1_TD1		= IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC16__RMII1_TD0		= IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC17__RMII1_TXEN		= IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTA24__ESDHC1_CLK		= IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
 	VF610_PAD_PTA25__ESDHC1_CMD		= IOMUX_PAD(0x003c, 0x003c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
 	VF610_PAD_PTA26__ESDHC1_DAT0		= IOMUX_PAD(0x0040, 0x0040, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),

arch/arm/include/asm/gic.h

@@ -51,4 +51,60 @@
 #define GICC_IIDR		0x00fc
 #define GICC_DIR		0x1000
 
+/* ReDistributor Registers for Control and Physical LPIs */
+#define GICR_CTLR		0x0000
+#define GICR_IIDR		0x0004
+#define GICR_TYPER		0x0008
+#define GICR_STATUSR		0x0010
+#define GICR_WAKER		0x0014
+#define GICR_SETLPIR		0x0040
+#define GICR_CLRLPIR		0x0048
+#define GICR_SEIR		0x0068
+#define GICR_PROPBASER		0x0070
+#define GICR_PENDBASER		0x0078
+#define GICR_INVLPIR		0x00a0
+#define GICR_INVALLR		0x00b0
+#define GICR_SYNCR		0x00c0
+#define GICR_MOVLPIR		0x0100
+#define GICR_MOVALLR		0x0110
+
+/* ReDistributor Registers for SGIs and PPIs */
+#define GICR_IGROUPRn		0x0080
+#define GICR_ISENABLERn		0x0100
+#define GICR_ICENABLERn		0x0180
+#define GICR_ISPENDRn		0x0200
+#define GICR_ICPENDRn		0x0280
+#define GICR_ISACTIVERn		0x0300
+#define GICR_ICACTIVERn		0x0380
+#define GICR_IPRIORITYRn	0x0400
+#define GICR_ICFGR0		0x0c00
+#define GICR_ICFGR1		0x0c04
+#define GICR_IGROUPMODRn	0x0d00
+#define GICR_NSACRn		0x0e00
+
+/* Cpu Interface System Registers */
+#define ICC_IAR0_EL1		S3_0_C12_C8_0
+#define ICC_IAR1_EL1		S3_0_C12_C12_0
+#define ICC_EOIR0_EL1		S3_0_C12_C8_1
+#define ICC_EOIR1_EL1		S3_0_C12_C12_1
+#define ICC_HPPIR0_EL1		S3_0_C12_C8_2
+#define ICC_HPPIR1_EL1		S3_0_C12_C12_2
+#define ICC_BPR0_EL1		S3_0_C12_C8_3
+#define ICC_BPR1_EL1		S3_0_C12_C12_3
+#define ICC_DIR_EL1		S3_0_C12_C11_1
+#define ICC_PMR_EL1		S3_0_C4_C6_0
+#define ICC_RPR_EL1		S3_0_C12_C11_3
+#define ICC_CTLR_EL1		S3_0_C12_C12_4
+#define ICC_CTLR_EL3		S3_6_C12_C12_4
+#define ICC_SRE_EL1		S3_0_C12_C12_5
+#define ICC_SRE_EL2		S3_4_C12_C9_5
+#define ICC_SRE_EL3		S3_6_C12_C12_5
+#define ICC_IGRPEN0_EL1		S3_0_C12_C12_6
+#define ICC_IGRPEN1_EL1		S3_0_C12_C12_7
+#define ICC_IGRPEN1_EL3		S3_6_C12_C12_7
+#define ICC_SEIEN_EL1		S3_0_C12_C13_0
+#define ICC_SGI0R_EL1		S3_0_C12_C11_7
+#define ICC_SGI1R_EL1		S3_0_C12_C11_5
+#define ICC_ASGI1R_EL1		S3_0_C12_C11_6
+
 #endif /* __GIC_H__ */

arch/arm/include/asm/system.h

@@ -66,6 +66,7 @@ static inline void set_sctlr(unsigned int val)
 }
 
 void __asm_flush_dcache_all(void);
+void __asm_invalidate_dcache_all(void);
 void __asm_flush_dcache_range(u64 start, u64 end);
 void __asm_invalidate_tlb_all(void);
 void __asm_invalidate_icache_all(void);

arch/arm/lib/Makefile

@@ -35,6 +35,7 @@ endif
 
 obj-y	+= sections.o
 ifdef CONFIG_ARM64
+obj-y	+= gic_64.o
 obj-y	+= interrupts_64.o
 else
 obj-y	+= interrupts.o

arch/arm/lib/asm-offsets.c

@@ -0,0 +1,248 @@
+/*
+ * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
+ *
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/kbuild.h>
+
+#if defined(CONFIG_MB86R0x)
+#include <asm/arch/mb86r0x.h>
+#endif
+#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) \
+	|| defined(CONFIG_MX51) || defined(CONFIG_MX53)
+#include <asm/arch/imx-regs.h>
+#endif
+
+int main(void)
+{
+	/*
+	 * TODO : Check if each entry in this file is really necessary.
+	 *   - struct mb86r0x_ddr2
+	 *   - struct mb86r0x_memc
+	 *   - struct esdramc_regs
+	 *   - struct max_regs
+	 *   - struct aips_regs
+	 *   - struct aipi_regs
+	 *   - struct clkctl
+	 *   - struct dpll
+	 * are used only for generating asm-offsets.h.
+	 * It means their offset addresses are referenced only from assembly
+	 * code. Is it better to define the macros directly in headers?
+	 */
+
+#if defined(CONFIG_MB86R0x)
+	/* ddr2 controller */
+	DEFINE(DDR2_DRIC, offsetof(struct mb86r0x_ddr2c, dric));
+	DEFINE(DDR2_DRIC1, offsetof(struct mb86r0x_ddr2c, dric1));
+	DEFINE(DDR2_DRIC2, offsetof(struct mb86r0x_ddr2c, dric2));
+	DEFINE(DDR2_DRCA, offsetof(struct mb86r0x_ddr2c, drca));
+	DEFINE(DDR2_DRCM, offsetof(struct mb86r0x_ddr2c, drcm));
+	DEFINE(DDR2_DRCST1, offsetof(struct mb86r0x_ddr2c, drcst1));
+	DEFINE(DDR2_DRCST2, offsetof(struct mb86r0x_ddr2c, drcst2));
+	DEFINE(DDR2_DRCR, offsetof(struct mb86r0x_ddr2c, drcr));
+	DEFINE(DDR2_DRCF, offsetof(struct mb86r0x_ddr2c, drcf));
+	DEFINE(DDR2_DRASR, offsetof(struct mb86r0x_ddr2c, drasr));
+	DEFINE(DDR2_DRIMS, offsetof(struct mb86r0x_ddr2c, drims));
+	DEFINE(DDR2_DROS, offsetof(struct mb86r0x_ddr2c, dros));
+	DEFINE(DDR2_DRIBSODT1, offsetof(struct mb86r0x_ddr2c, dribsodt1));
+	DEFINE(DDR2_DROABA, offsetof(struct mb86r0x_ddr2c, droaba));
+	DEFINE(DDR2_DROBS, offsetof(struct mb86r0x_ddr2c, drobs));
+
+	/* clock reset generator */
+	DEFINE(CRG_CRPR, offsetof(struct mb86r0x_crg, crpr));
+	DEFINE(CRG_CRHA, offsetof(struct mb86r0x_crg, crha));
+	DEFINE(CRG_CRPA, offsetof(struct mb86r0x_crg, crpa));
+	DEFINE(CRG_CRPB, offsetof(struct mb86r0x_crg, crpb));
+	DEFINE(CRG_CRHB, offsetof(struct mb86r0x_crg, crhb));
+	DEFINE(CRG_CRAM, offsetof(struct mb86r0x_crg, cram));
+
+	/* chip control module */
+	DEFINE(CCNT_CDCRC, offsetof(struct mb86r0x_ccnt, cdcrc));
+
+	/* external bus interface */
+	DEFINE(MEMC_MCFMODE0, offsetof(struct mb86r0x_memc, mcfmode[0]));
+	DEFINE(MEMC_MCFMODE2, offsetof(struct mb86r0x_memc, mcfmode[2]));
+	DEFINE(MEMC_MCFMODE4, offsetof(struct mb86r0x_memc, mcfmode[4]));
+	DEFINE(MEMC_MCFTIM0, offsetof(struct mb86r0x_memc, mcftim[0]));
+	DEFINE(MEMC_MCFTIM2, offsetof(struct mb86r0x_memc, mcftim[2]));
+	DEFINE(MEMC_MCFTIM4, offsetof(struct mb86r0x_memc, mcftim[4]));
+	DEFINE(MEMC_MCFAREA0, offsetof(struct mb86r0x_memc, mcfarea[0]));
+	DEFINE(MEMC_MCFAREA2, offsetof(struct mb86r0x_memc, mcfarea[2]));
+	DEFINE(MEMC_MCFAREA4, offsetof(struct mb86r0x_memc, mcfarea[4]));
+#endif
+
+#if defined(CONFIG_MX25)
+	/* Clock Control Module */
+	DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl));
+	DEFINE(CCM_CGCR0, offsetof(struct ccm_regs, cgr0));
+	DEFINE(CCM_CGCR1, offsetof(struct ccm_regs, cgr1));
+	DEFINE(CCM_CGCR2, offsetof(struct ccm_regs, cgr2));
+	DEFINE(CCM_PCDR2, offsetof(struct ccm_regs, pcdr[2]));
+	DEFINE(CCM_MCR, offsetof(struct ccm_regs, mcr));
+
+	/* Enhanced SDRAM Controller */
+	DEFINE(ESDRAMC_ESDCTL0, offsetof(struct esdramc_regs, ctl0));
+	DEFINE(ESDRAMC_ESDCFG0, offsetof(struct esdramc_regs, cfg0));
+	DEFINE(ESDRAMC_ESDMISC, offsetof(struct esdramc_regs, misc));
+
+	/* Multi-Layer AHB Crossbar Switch */
+	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
+	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
+	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
+	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
+	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
+	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
+	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
+	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
+	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
+	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
+	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
+	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
+	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
+	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
+	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
+
+	/* AHB <-> IP-Bus Interface */
+	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
+	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
+#endif
+
+#if defined(CONFIG_MX27)
+	DEFINE(AIPI1_PSR0, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr0));
+	DEFINE(AIPI1_PSR1, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr1));
+	DEFINE(AIPI2_PSR0, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr0));
+	DEFINE(AIPI2_PSR1, IMX_AIPI2_BASE + offsetof(struct aipi_regs, psr1));
+
+	DEFINE(CSCR, IMX_PLL_BASE + offsetof(struct pll_regs, cscr));
+	DEFINE(MPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, mpctl0));
+	DEFINE(SPCTL0, IMX_PLL_BASE + offsetof(struct pll_regs, spctl0));
+	DEFINE(PCDR0, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr0));
+	DEFINE(PCDR1, IMX_PLL_BASE + offsetof(struct pll_regs, pcdr1));
+	DEFINE(PCCR0, IMX_PLL_BASE + offsetof(struct pll_regs, pccr0));
+	DEFINE(PCCR1, IMX_PLL_BASE + offsetof(struct pll_regs, pccr1));
+
+	DEFINE(ESDCTL0_ROF, offsetof(struct esdramc_regs, esdctl0));
+	DEFINE(ESDCFG0_ROF, offsetof(struct esdramc_regs, esdcfg0));
+	DEFINE(ESDCTL1_ROF, offsetof(struct esdramc_regs, esdctl1));
+	DEFINE(ESDCFG1_ROF, offsetof(struct esdramc_regs, esdcfg1));
+	DEFINE(ESDMISC_ROF, offsetof(struct esdramc_regs, esdmisc));
+
+	DEFINE(GPCR, IMX_SYSTEM_CTL_BASE +
+		offsetof(struct system_control_regs, gpcr));
+	DEFINE(FMCR, IMX_SYSTEM_CTL_BASE +
+		offsetof(struct system_control_regs, fmcr));
+#endif
+
+#if defined(CONFIG_MX35)
+	/* Round up to make sure size gives nice stack alignment */
+	DEFINE(CLKCTL_CCMR, offsetof(struct ccm_regs, ccmr));
+	DEFINE(CLKCTL_PDR0, offsetof(struct ccm_regs, pdr0));
+	DEFINE(CLKCTL_PDR1, offsetof(struct ccm_regs, pdr1));
+	DEFINE(CLKCTL_PDR2, offsetof(struct ccm_regs, pdr2));
+	DEFINE(CLKCTL_PDR3, offsetof(struct ccm_regs, pdr3));
+	DEFINE(CLKCTL_PDR4, offsetof(struct ccm_regs, pdr4));
+	DEFINE(CLKCTL_RCSR, offsetof(struct ccm_regs, rcsr));
+	DEFINE(CLKCTL_MPCTL, offsetof(struct ccm_regs, mpctl));
+	DEFINE(CLKCTL_PPCTL, offsetof(struct ccm_regs, ppctl));
+	DEFINE(CLKCTL_ACMR, offsetof(struct ccm_regs, acmr));
+	DEFINE(CLKCTL_COSR, offsetof(struct ccm_regs, cosr));
+	DEFINE(CLKCTL_CGR0, offsetof(struct ccm_regs, cgr0));
+	DEFINE(CLKCTL_CGR1, offsetof(struct ccm_regs, cgr1));
+	DEFINE(CLKCTL_CGR2, offsetof(struct ccm_regs, cgr2));
+	DEFINE(CLKCTL_CGR3, offsetof(struct ccm_regs, cgr3));
+
+	/* Multi-Layer AHB Crossbar Switch */
+	DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0));
+	DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0));
+	DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1));
+	DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1));
+	DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2));
+	DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2));
+	DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3));
+	DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3));
+	DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4));
+	DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4));
+	DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0));
+	DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1));
+	DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2));
+	DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3));
+	DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4));
+	DEFINE(MAX_MGPCR5, offsetof(struct max_regs, mgpcr5));
+
+	/* AHB <-> IP-Bus Interface */
+	DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7));
+	DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15));
+	DEFINE(AIPS_PACR_0_7, offsetof(struct aips_regs, pacr_0_7));
+	DEFINE(AIPS_PACR_8_15, offsetof(struct aips_regs, pacr_8_15));
+	DEFINE(AIPS_PACR_16_23, offsetof(struct aips_regs, pacr_16_23));
+	DEFINE(AIPS_PACR_24_31, offsetof(struct aips_regs, pacr_24_31));
+	DEFINE(AIPS_OPACR_0_7, offsetof(struct aips_regs, opacr_0_7));
+	DEFINE(AIPS_OPACR_8_15, offsetof(struct aips_regs, opacr_8_15));
+	DEFINE(AIPS_OPACR_16_23, offsetof(struct aips_regs, opacr_16_23));
+	DEFINE(AIPS_OPACR_24_31, offsetof(struct aips_regs, opacr_24_31));
+	DEFINE(AIPS_OPACR_32_39, offsetof(struct aips_regs, opacr_32_39));
+#endif
+
+#if defined(CONFIG_MX51) || defined(CONFIG_MX53)
+	/* Round up to make sure size gives nice stack alignment */
+	DEFINE(CLKCTL_CCMR, offsetof(struct clkctl, ccr));
+	DEFINE(CLKCTL_CCDR, offsetof(struct clkctl, ccdr));
+	DEFINE(CLKCTL_CSR, offsetof(struct clkctl, csr));
+	DEFINE(CLKCTL_CCSR, offsetof(struct clkctl, ccsr));
+	DEFINE(CLKCTL_CACRR, offsetof(struct clkctl, cacrr));
+	DEFINE(CLKCTL_CBCDR, offsetof(struct clkctl, cbcdr));
+	DEFINE(CLKCTL_CBCMR, offsetof(struct clkctl, cbcmr));
+	DEFINE(CLKCTL_CSCMR1, offsetof(struct clkctl, cscmr1));
+	DEFINE(CLKCTL_CSCMR2, offsetof(struct clkctl, cscmr2));
+	DEFINE(CLKCTL_CSCDR1, offsetof(struct clkctl, cscdr1));
+	DEFINE(CLKCTL_CS1CDR, offsetof(struct clkctl, cs1cdr));
+	DEFINE(CLKCTL_CS2CDR, offsetof(struct clkctl, cs2cdr));
+	DEFINE(CLKCTL_CDCDR, offsetof(struct clkctl, cdcdr));
+	DEFINE(CLKCTL_CHSCCDR, offsetof(struct clkctl, chsccdr));
+	DEFINE(CLKCTL_CSCDR2, offsetof(struct clkctl, cscdr2));
+	DEFINE(CLKCTL_CSCDR3, offsetof(struct clkctl, cscdr3));
+	DEFINE(CLKCTL_CSCDR4, offsetof(struct clkctl, cscdr4));
+	DEFINE(CLKCTL_CWDR, offsetof(struct clkctl, cwdr));
+	DEFINE(CLKCTL_CDHIPR, offsetof(struct clkctl, cdhipr));
+	DEFINE(CLKCTL_CDCR, offsetof(struct clkctl, cdcr));
+	DEFINE(CLKCTL_CTOR, offsetof(struct clkctl, ctor));
+	DEFINE(CLKCTL_CLPCR, offsetof(struct clkctl, clpcr));
+	DEFINE(CLKCTL_CISR, offsetof(struct clkctl, cisr));
+	DEFINE(CLKCTL_CIMR, offsetof(struct clkctl, cimr));
+	DEFINE(CLKCTL_CCOSR, offsetof(struct clkctl, ccosr));
+	DEFINE(CLKCTL_CGPR, offsetof(struct clkctl, cgpr));
+	DEFINE(CLKCTL_CCGR0, offsetof(struct clkctl, ccgr0));
+	DEFINE(CLKCTL_CCGR1, offsetof(struct clkctl, ccgr1));
+	DEFINE(CLKCTL_CCGR2, offsetof(struct clkctl, ccgr2));
+	DEFINE(CLKCTL_CCGR3, offsetof(struct clkctl, ccgr3));
+	DEFINE(CLKCTL_CCGR4, offsetof(struct clkctl, ccgr4));
+	DEFINE(CLKCTL_CCGR5, offsetof(struct clkctl, ccgr5));
+	DEFINE(CLKCTL_CCGR6, offsetof(struct clkctl, ccgr6));
+	DEFINE(CLKCTL_CMEOR, offsetof(struct clkctl, cmeor));
+#if defined(CONFIG_MX53)
+	DEFINE(CLKCTL_CCGR7, offsetof(struct clkctl, ccgr7));
+#endif
+
+	/* DPLL */
+	DEFINE(PLL_DP_CTL, offsetof(struct dpll, dp_ctl));
+	DEFINE(PLL_DP_CONFIG, offsetof(struct dpll, dp_config));
+	DEFINE(PLL_DP_OP, offsetof(struct dpll, dp_op));
+	DEFINE(PLL_DP_MFD, offsetof(struct dpll, dp_mfd));
+	DEFINE(PLL_DP_MFN, offsetof(struct dpll, dp_mfn));
+	DEFINE(PLL_DP_HFS_OP, offsetof(struct dpll, dp_hfs_op));
+	DEFINE(PLL_DP_HFS_MFD, offsetof(struct dpll, dp_hfs_mfd));
+	DEFINE(PLL_DP_HFS_MFN, offsetof(struct dpll, dp_hfs_mfn));
+#endif
+
+	return 0;
+}

arch/arm/lib/bootm.c

@@ -71,8 +71,7 @@ static void announce_and_cleanup(int fake)
 		"(fake run for tracing)" : "");
 	bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
 #ifdef CONFIG_BOOTSTAGE_FDT
-	if (flag == BOOTM_STATE_OS_FAKE_GO)
-		bootstage_fdt_add_report();
+	bootstage_fdt_add_report();
 #endif
 #ifdef CONFIG_BOOTSTAGE_REPORT
 	bootstage_report();
@@ -199,6 +198,7 @@ static void do_nonsec_virt_switch(void)
 
 #ifdef CONFIG_ARM64
 	smp_kick_all_cpus();
+	flush_dcache_all();	/* flush cache before swtiching to EL2 */
 	armv8_switch_to_el2();
 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
 	armv8_switch_to_el1();

arch/arm/lib/gic_64.S

@@ -0,0 +1,194 @@
+/*
+ * GIC Initialization Routines.
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/gic.h>
+
+
+/*************************************************************************
+ *
+ * void gic_init_secure(DistributorBase);
+ *
+ * Initialize secure copy of GIC at EL3.
+ *
+ *************************************************************************/
+ENTRY(gic_init_secure)
+	/*
+	 * Initialize Distributor
+	 * x0: Distributor Base
+	 */
+#if defined(CONFIG_GICV3)
+	mov	w9, #0x37		/* EnableGrp0 | EnableGrp1NS */
+					/* EnableGrp1S | ARE_S | ARE_NS */
+	str	w9, [x0, GICD_CTLR]	/* Secure GICD_CTLR */
+	ldr	w9, [x0, GICD_TYPER]
+	and	w10, w9, #0x1f		/* ITLinesNumber */
+	cbz	w10, 1f			/* No SPIs */
+	add	x11, x0, (GICD_IGROUPRn + 4)
+	add	x12, x0, (GICD_IGROUPMODRn + 4)
+	mov	w9, #~0
+0:	str	w9, [x11], #0x4
+	str	wzr, [x12], #0x4	/* Config SPIs as Group1NS */
+	sub	w10, w10, #0x1
+	cbnz	w10, 0b
+#elif defined(CONFIG_GICV2)
+	mov	w9, #0x3		/* EnableGrp0 | EnableGrp1 */
+	str	w9, [x0, GICD_CTLR]	/* Secure GICD_CTLR */
+	ldr	w9, [x0, GICD_TYPER]
+	and	w10, w9, #0x1f		/* ITLinesNumber */
+	cbz	w10, 1f			/* No SPIs */
+	add	x11, x0, (GICD_IGROUPRn + 4)
+	mov	w9, #~0			/* Config SPIs as Grp1 */
+0:	str	w9, [x11], #0x4
+	sub	w10, w10, #0x1
+	cbnz	w10, 0b
+#endif
+1:
+	ret
+ENDPROC(gic_init_secure)
+
+
+/*************************************************************************
+ * For Gicv2:
+ * void gic_init_secure_percpu(DistributorBase, CpuInterfaceBase);
+ * For Gicv3:
+ * void gic_init_secure_percpu(ReDistributorBase);
+ *
+ * Initialize secure copy of GIC at EL3.
+ *
+ *************************************************************************/
+ENTRY(gic_init_secure_percpu)
+#if defined(CONFIG_GICV3)
+	/*
+	 * Initialize ReDistributor
+	 * x0: ReDistributor Base
+	 */
+	mrs	x10, mpidr_el1
+	lsr	x9, x10, #32
+	bfi	x10, x9, #24, #8	/* w10 is aff3:aff2:aff1:aff0 */
+	mov	x9, x0
+1:	ldr	x11, [x9, GICR_TYPER]
+	lsr	x11, x11, #32		/* w11 is aff3:aff2:aff1:aff0 */
+	cmp	w10, w11
+	b.eq	2f
+	add	x9, x9, #(2 << 16)
+	b	1b
+
+	/* x9: ReDistributor Base Address of Current CPU */
+2:	mov	w10, #~0x2
+	ldr	w11, [x9, GICR_WAKER]
+	and	w11, w11, w10		/* Clear ProcessorSleep */
+	str	w11, [x9, GICR_WAKER]
+	dsb	st
+	isb
+3:	ldr	w10, [x9, GICR_WAKER]
+	tbnz	w10, #2, 3b		/* Wait Children be Alive */
+
+	add	x10, x9, #(1 << 16)	/* SGI_Base */
+	mov	w11, #~0
+	str	w11, [x10, GICR_IGROUPRn]
+	str	wzr, [x10, GICR_IGROUPMODRn]	/* SGIs|PPIs Group1NS */
+	mov	w11, #0x1		/* Enable SGI 0 */
+	str	w11, [x10, GICR_ISENABLERn]
+
+	/* Initialize Cpu Interface */
+	mrs	x10, ICC_SRE_EL3
+	orr	x10, x10, #0xf		/* SRE & Disable IRQ/FIQ Bypass & */
+					/* Allow EL2 access to ICC_SRE_EL2 */
+	msr	ICC_SRE_EL3, x10
+	isb
+
+	mrs	x10, ICC_SRE_EL2
+	orr	x10, x10, #0xf		/* SRE & Disable IRQ/FIQ Bypass & */
+					/* Allow EL1 access to ICC_SRE_EL1 */
+	msr	ICC_SRE_EL2, x10
+	isb
+
+	mov	x10, #0x3		/* EnableGrp1NS | EnableGrp1S */
+	msr	ICC_IGRPEN1_EL3, x10
+	isb
+
+	msr	ICC_CTLR_EL3, xzr
+	isb
+
+	msr	ICC_CTLR_EL1, xzr	/* NonSecure ICC_CTLR_EL1 */
+	isb
+
+	mov	x10, #0x1 << 7		/* Non-Secure access to ICC_PMR_EL1 */
+	msr	ICC_PMR_EL1, x10
+	isb
+#elif defined(CONFIG_GICV2)
+	/*
+	 * Initialize SGIs and PPIs
+	 * x0: Distributor Base
+	 * x1: Cpu Interface Base
+	 */
+	mov	w9, #~0			/* Config SGIs and PPIs as Grp1 */
+	str	w9, [x0, GICD_IGROUPRn]	/* GICD_IGROUPR0 */
+	mov	w9, #0x1		/* Enable SGI 0 */
+	str	w9, [x0, GICD_ISENABLERn]
+
+	/* Initialize Cpu Interface */
+	mov	w9, #0x1e7		/* Disable IRQ/FIQ Bypass & */
+					/* Enable Ack Group1 Interrupt & */
+					/* EnableGrp0 & EnableGrp1 */
+	str	w9, [x1, GICC_CTLR]	/* Secure GICC_CTLR */
+
+	mov	w9, #0x1 << 7		/* Non-Secure access to GICC_PMR */
+	str	w9, [x1, GICC_PMR]
+#endif
+	ret
+ENDPROC(gic_init_secure_percpu)
+
+
+/*************************************************************************
+ * For Gicv2:
+ * void gic_kick_secondary_cpus(DistributorBase);
+ * For Gicv3:
+ * void gic_kick_secondary_cpus(void);
+ *
+ *************************************************************************/
+ENTRY(gic_kick_secondary_cpus)
+#if defined(CONFIG_GICV3)
+	mov	x9, #(1 << 40)
+	msr	ICC_ASGI1R_EL1, x9
+	isb
+#elif defined(CONFIG_GICV2)
+	mov	w9, #0x8000
+	movk	w9, #0x100, lsl #16
+	str	w9, [x0, GICD_SGIR]
+#endif
+	ret
+ENDPROC(gic_kick_secondary_cpus)
+
+
+/*************************************************************************
+ * For Gicv2:
+ * void gic_wait_for_interrupt(CpuInterfaceBase);
+ * For Gicv3:
+ * void gic_wait_for_interrupt(void);
+ *
+ * Wait for SGI 0 from master.
+ *
+ *************************************************************************/
+ENTRY(gic_wait_for_interrupt)
+0:	wfi
+#if defined(CONFIG_GICV3)
+	mrs	x9, ICC_IAR1_EL1
+	msr	ICC_EOIR1_EL1, x9
+#elif defined(CONFIG_GICV2)
+	ldr	w9, [x0, GICC_AIAR]
+	str	w9, [x0, GICC_AEOIR]
+#endif
+	cbnz	w9, 0b
+	ret
+ENDPROC(gic_wait_for_interrupt)

arch/arm/lib/relocate_64.S

@@ -11,6 +11,7 @@
 #include <asm-offsets.h>
 #include <config.h>
 #include <linux/linkage.h>
+#include <asm/macro.h>
 
 /*
  * void relocate_code (addr_moni)
@@ -19,6 +20,9 @@
  * x0 holds the destination address.
  */
 ENTRY(relocate_code)
+	stp	x29, x30, [sp, #-32]!	/* create a stack frame */
+	mov	x29, sp
+	str	x0, [sp, #16]
 	/*
 	 * Copy u-boot from flash to RAM
 	 */
@@ -32,6 +36,7 @@ copy_loop:
 	stp	x10, x11, [x0], #16	/* copy to   target address [x0] */
 	cmp	x1, x2			/* until source end address [x2] */
 	b.lo	copy_loop
+	str	x0, [sp, #24]
 
 	/*
 	 * Fix .rela.dyn relocations
@@ -54,5 +59,19 @@ fixnext:
 	b.lo	fixloop
 
 relocate_done:
+	switch_el x1, 3f, 2f, 1f
+	bl	hang
+3:	mrs	x0, sctlr_el3
+	b	0f
+2:	mrs	x0, sctlr_el2
+	b	0f
+1:	mrs	x0, sctlr_el1
+0:	tbz	w0, #2, 5f	/* skip flushing cache if disabled */
+	tbz	w0, #12, 4f	/* invalide i-cache is enabled */
+	ic	iallu		/* i-cache invalidate all */
+	isb	sy
+4:	ldp	x0, x1, [sp, #16]
+	bl	__asm_flush_dcache_range
+5:	ldp	x29, x30, [sp],#16
 	ret
 ENDPROC(relocate_code)

arch/m68k/cpu/mcf52x2/config.mk

@@ -7,14 +7,14 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is5208:=$(shell grep CONFIG_M5208 $(TOPDIR)/include/$(cfg))
-is5249:=$(shell grep CONFIG_M5249 $(TOPDIR)/include/$(cfg))
-is5253:=$(shell grep CONFIG_M5253 $(TOPDIR)/include/$(cfg))
-is5271:=$(shell grep CONFIG_M5271 $(TOPDIR)/include/$(cfg))
-is5272:=$(shell grep CONFIG_M5272 $(TOPDIR)/include/$(cfg))
-is5275:=$(shell grep CONFIG_M5275 $(TOPDIR)/include/$(cfg))
-is5282:=$(shell grep CONFIG_M5282 $(TOPDIR)/include/$(cfg))
+cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5208:=$(shell grep CONFIG_M5208 $(srctree)/include/$(cfg))
+is5249:=$(shell grep CONFIG_M5249 $(srctree)/include/$(cfg))
+is5253:=$(shell grep CONFIG_M5253 $(srctree)/include/$(cfg))
+is5271:=$(shell grep CONFIG_M5271 $(srctree)/include/$(cfg))
+is5272:=$(shell grep CONFIG_M5272 $(srctree)/include/$(cfg))
+is5275:=$(shell grep CONFIG_M5275 $(srctree)/include/$(cfg))
+is5282:=$(shell grep CONFIG_M5282 $(srctree)/include/$(cfg))
 
 ifneq (,$(findstring CONFIG_M5208,$(is5208)))
 PLATFORM_CPPFLAGS += -mcpu=5208

arch/m68k/cpu/mcf532x/config.mk

@@ -7,9 +7,9 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is5301x:=$(shell grep CONFIG_MCF5301x $(TOPDIR)/include/$(cfg))
-is532x:=$(shell grep CONFIG_MCF532x $(TOPDIR)/include/$(cfg))
+cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5301x:=$(shell grep CONFIG_MCF5301x $(srctree)/include/$(cfg))
+is532x:=$(shell grep CONFIG_MCF532x $(srctree)/include/$(cfg))
 
 ifneq (,$(findstring CONFIG_MCF5301x,$(is5301x)))
 PLATFORM_CPPFLAGS += -mcpu=53015 -fPIC

arch/m68k/cpu/mcf5445x/config.mk

@@ -9,8 +9,8 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is5441x:=$(shell grep CONFIG_MCF5441x $(TOPDIR)/include/$(cfg))
+cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5441x:=$(shell grep CONFIG_MCF5441x $(srctree)/include/$(cfg))
 
 ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x)))
 PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC

arch/microblaze/config.mk

@@ -15,5 +15,3 @@ endif
 CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000
 
 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__
-
-LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds

arch/nds32/cpu/n1213/ag101/asm-offsets.c

@@ -1,44 +0,0 @@
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <common.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
-#ifdef CONFIG_FTSMC020
-	OFFSET(FTSMC020_BANK0_CR,	ftsmc020, bank[0].cr);
-	OFFSET(FTSMC020_BANK0_TPR,	ftsmc020, bank[0].tpr);
-#endif
-	BLANK();
-#ifdef CONFIG_FTAHBC020S
-	OFFSET(FTAHBC020S_SLAVE_BSR_4,	ftahbc02s, s_bsr[4]);
-	OFFSET(FTAHBC020S_SLAVE_BSR_6,	ftahbc02s, s_bsr[6]);
-	OFFSET(FTAHBC020S_CR,		ftahbc02s, cr);
-#endif
-	BLANK();
-#ifdef CONFIG_FTPMU010
-	OFFSET(FTPMU010_PDLLCR0,	ftpmu010, PDLLCR0);
-#endif
-	BLANK();
-#ifdef CONFIG_FTSDMC021
-	OFFSET(FTSDMC021_TP1,		ftsdmc021, tp1);
-	OFFSET(FTSDMC021_TP2,		ftsdmc021, tp2);
-	OFFSET(FTSDMC021_CR1,		ftsdmc021, cr1);
-	OFFSET(FTSDMC021_CR2,		ftsdmc021, cr2);
-	OFFSET(FTSDMC021_BANK0_BSR,	ftsdmc021, bank0_bsr);
-	OFFSET(FTSDMC021_BANK1_BSR,	ftsdmc021, bank1_bsr);
-	OFFSET(FTSDMC021_BANK2_BSR,	ftsdmc021, bank2_bsr);
-	OFFSET(FTSDMC021_BANK3_BSR,	ftsdmc021, bank3_bsr);
-#endif
-	return 0;
-}

arch/nds32/lib/asm-offsets.c

@@ -15,16 +15,43 @@
 
 int main(void)
 {
+	/*
+	 * TODO : Check if each entry in this file is really necessary.
+	 *   - struct ftahbc02s
+	 *   - struct ftsdmc021
+	 *   - struct andes_pcu
+	 *   - struct dwcddr21mctl
+	 * are used only for generating asm-offsets.h.
+	 * It means their offset addresses are referenced only from assembly
+	 * code. Is it better to define the macros directly in headers?
+	 */
+
 #ifdef CONFIG_FTSMC020
 	OFFSET(FTSMC020_BANK0_CR,	ftsmc020, bank[0].cr);
 	OFFSET(FTSMC020_BANK0_TPR,	ftsmc020, bank[0].tpr);
 #endif
 	BLANK();
 #ifdef CONFIG_FTAHBC020S
+	OFFSET(FTAHBC020S_SLAVE_BSR_4,	ftahbc02s, s_bsr[4]);
 	OFFSET(FTAHBC020S_SLAVE_BSR_6,	ftahbc02s, s_bsr[6]);
 	OFFSET(FTAHBC020S_CR,		ftahbc02s, cr);
 #endif
 	BLANK();
+#ifdef CONFIG_FTPMU010
+	OFFSET(FTPMU010_PDLLCR0,	ftpmu010, PDLLCR0);
+#endif
+	BLANK();
+#ifdef CONFIG_FTSDMC021
+	OFFSET(FTSDMC021_TP1,		ftsdmc021, tp1);
+	OFFSET(FTSDMC021_TP2,		ftsdmc021, tp2);
+	OFFSET(FTSDMC021_CR1,		ftsdmc021, cr1);
+	OFFSET(FTSDMC021_CR2,		ftsdmc021, cr2);
+	OFFSET(FTSDMC021_BANK0_BSR,	ftsdmc021, bank0_bsr);
+	OFFSET(FTSDMC021_BANK1_BSR,	ftsdmc021, bank1_bsr);
+	OFFSET(FTSDMC021_BANK2_BSR,	ftsdmc021, bank2_bsr);
+	OFFSET(FTSDMC021_BANK3_BSR,	ftsdmc021, bank3_bsr);
+#endif
+	BLANK();
 #ifdef CONFIG_ANDES_PCU
 	OFFSET(ANDES_PCU_PCS4,		andes_pcu, pcs4.parm);	/* 0x104 */
 #endif
@@ -50,5 +77,6 @@ int main(void)
 	OFFSET(DWCDDR21MCTL_DTAR,	dwcddr21mctl, dtar);	/* 0xa4 */
 	OFFSET(DWCDDR21MCTL_MR,		dwcddr21mctl, mr);	/* 0x1f0 */
 #endif
+
 	return 0;
 }

arch/openrisc/config.mk

@@ -14,5 +14,3 @@ endif
 PLATFORM_CPPFLAGS += -DCONFIG_OPENRISC -D__OR1K__ -ffixed-r10
 
 CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
-
-LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds

arch/powerpc/cpu/ppc4xx/config.mk

@@ -7,8 +7,8 @@
 
 PLATFORM_CPPFLAGS += -DCONFIG_4xx -mstring -msoft-float
 
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
+cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is440:=$(shell grep CONFIG_440 $(srctree)/include/$(cfg))
 
 ifneq (,$(findstring CONFIG_440,$(is440)))
 PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440

arch/powerpc/include/asm/config_mpc85xx.h

@@ -734,6 +734,8 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_A006261
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
 
 #elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
 #define CONFIG_E6500
@@ -778,6 +780,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 #define CONFIG_SYS_FSL_SFP_VER_3_0
 #define CONFIG_SYS_FSL_ISBC_VER		2
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
+
 
 #elif defined(CONFIG_PPC_C29X)
 #define CONFIG_MAX_CPUS			1

arch/sandbox/config.mk

@@ -5,6 +5,11 @@ PLATFORM_CPPFLAGS += -DCONFIG_SANDBOX -D__SANDBOX__ -U_FORTIFY_SOURCE
 PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM -DCONFIG_SYS_GENERIC_BOARD
 PLATFORM_LIBS += -lrt
 
+ifdef CONFIG_SANDBOX_SDL
+PLATFORM_LIBS += $(shell sdl-config --libs)
+PLATFORM_CPPFLAGS += $(shell sdl-config --cflags)
+endif
+
 # Support generic board on sandbox
 __HAVE_ARCH_GENERIC_BOARD := y
 

arch/sandbox/cpu/Makefile

@@ -8,6 +8,7 @@
 #
 
 obj-y	:= cpu.o os.o start.o state.o
+obj-$(CONFIG_SANDBOX_SDL)	+= sdl.o
 
 # os.c is build in the system environment, so needs standard includes
 # CFLAGS_REMOVE_os.o cannot be used to drop header include path
@@ -17,3 +18,5 @@ cmd_cc_os.o = $(CC) $(filter-out -nostdinc, \
 
 $(obj)/os.o: $(src)/os.c FORCE
 	$(call if_changed_dep,cc_os.o)
+$(obj)/sdl.o: $(src)/sdl.c FORCE
+	$(call if_changed_dep,cc_os.o)

arch/sandbox/cpu/cpu.c

@@ -58,7 +58,7 @@ void *map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
 	return (void *)(gd->arch.ram_buf + paddr);
 }
 
-phys_addr_t map_to_sysmem(void *ptr)
+phys_addr_t map_to_sysmem(const void *ptr)
 {
 	return (u8 *)ptr - gd->arch.ram_buf;
 }

arch/sandbox/cpu/os.c

@@ -104,21 +104,22 @@ void os_exit(int exit_code)
 
 /* Restore tty state when we exit */
 static struct termios orig_term;
+static bool term_setup;
 
 static void os_fd_restore(void)
 {
-	tcsetattr(0, TCSANOW, &orig_term);
+	if (term_setup)
+		tcsetattr(0, TCSANOW, &orig_term);
 }
 
 /* Put tty into raw mode so <tab> and <ctrl+c> work */
-void os_tty_raw(int fd)
+void os_tty_raw(int fd, bool allow_sigs)
 {
-	static int setup = 0;
 	struct termios term;
 
-	if (setup)
+	if (term_setup)
 		return;
-	setup = 1;
+	term_setup = true;
 
 	/* If not a tty, don't complain */
 	if (tcgetattr(fd, &orig_term))
@@ -128,7 +129,7 @@ void os_tty_raw(int fd)
 	term.c_iflag = IGNBRK | IGNPAR;
 	term.c_oflag = OPOST | ONLCR;
 	term.c_cflag = CS8 | CREAD | CLOCAL;
-	term.c_lflag = 0;
+	term.c_lflag = allow_sigs ? ISIG : 0;
 	if (tcsetattr(fd, TCSANOW, &term))
 		return;
 
@@ -443,3 +444,93 @@ int os_read_ram_buf(const char *fname)
 
 	return 0;
 }
+
+static int make_exec(char *fname, const void *data, int size)
+{
+	int fd;
+
+	strcpy(fname, "/tmp/u-boot.jump.XXXXXX");
+	fd = mkstemp(fname);
+	if (fd < 0)
+		return -ENOENT;
+	if (write(fd, data, size) < 0)
+		return -EIO;
+	close(fd);
+	if (chmod(fname, 0777))
+		return -ENOEXEC;
+
+	return 0;
+}
+
+static int add_args(char ***argvp, const char *add_args[], int count)
+{
+	char **argv;
+	int argc;
+
+	for (argv = *argvp, argc = 0; (*argvp)[argc]; argc++)
+		;
+
+	argv = malloc((argc + count + 1) * sizeof(char *));
+	if (!argv) {
+		printf("Out of memory for %d argv\n", count);
+		return -ENOMEM;
+	}
+	memcpy(argv, *argvp, argc * sizeof(char *));
+	memcpy(argv + argc, add_args, count * sizeof(char *));
+	argv[argc + count] = NULL;
+
+	*argvp = argv;
+	return 0;
+}
+
+int os_jump_to_image(const void *dest, int size)
+{
+	struct sandbox_state *state = state_get_current();
+	char fname[30], mem_fname[30];
+	int fd, err;
+	const char *extra_args[5];
+	char **argv = state->argv;
+#ifdef DEBUG
+	int argc, i;
+#endif
+
+	err = make_exec(fname, dest, size);
+	if (err)
+		return err;
+
+	strcpy(mem_fname, "/tmp/u-boot.mem.XXXXXX");
+	fd = mkstemp(mem_fname);
+	if (fd < 0)
+		return -ENOENT;
+	close(fd);
+	err = os_write_ram_buf(mem_fname);
+	if (err)
+		return err;
+
+	os_fd_restore();
+
+	extra_args[0] = "-j";
+	extra_args[1] = fname;
+	extra_args[2] = "-m";
+	extra_args[3] = mem_fname;
+	extra_args[4] = "--rm_memory";
+	err = add_args(&argv, extra_args,
+		       sizeof(extra_args) / sizeof(extra_args[0]));
+	if (err)
+		return err;
+
+#ifdef DEBUG
+	for (i = 0; argv[i]; i++)
+		printf("%d %s\n", i, argv[i]);
+#endif
+
+	if (state_uninit())
+		os_exit(2);
+
+	err = execv(fname, argv);
+	free(argv);
+	if (err)
+		return err;
+
+	return unlink(fname);
+}

arch/sandbox/cpu/sdl.c

@@ -0,0 +1,341 @@
+/*
+ * Copyright (c) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <errno.h>
+#include <linux/input.h>
+#include <SDL/SDL.h>
+#include <sound.h>
+#include <asm/state.h>
+
+static struct sdl_info {
+	SDL_Surface *screen;
+	int width;
+	int height;
+	int depth;
+	int pitch;
+	uint frequency;
+	uint audio_pos;
+	uint audio_size;
+	uint8_t *audio_data;
+	bool audio_active;
+	bool inited;
+} sdl;
+
+static void sandbox_sdl_poll_events(void)
+{
+	/*
+	 * We don't want to include common.h in this file since it uses
+	 * system headers. So add a declation here.
+	 */
+	extern void reset_cpu(unsigned long addr);
+	SDL_Event event;
+
+	while (SDL_PollEvent(&event)) {
+		switch (event.type) {
+		case SDL_QUIT:
+			puts("LCD window closed - quitting\n");
+			reset_cpu(1);
+			break;
+		}
+	}
+}
+
+static int sandbox_sdl_ensure_init(void)
+{
+	if (!sdl.inited) {
+		if (SDL_Init(0) < 0) {
+			printf("Unable to initialize SDL: %s\n",
+			       SDL_GetError());
+			return -EIO;
+		}
+
+		atexit(SDL_Quit);
+
+		sdl.inited = true;
+	}
+	return 0;
+}
+
+int sandbox_sdl_init_display(int width, int height, int log2_bpp)
+{
+	struct sandbox_state *state = state_get_current();
+	int err;
+
+	if (!width || !state->show_lcd)
+		return 0;
+	err = sandbox_sdl_ensure_init();
+	if (err)
+		return err;
+	if (SDL_InitSubSystem(SDL_INIT_VIDEO) < 0) {
+		printf("Unable to initialize SDL LCD: %s\n", SDL_GetError());
+		return -EPERM;
+	}
+	SDL_WM_SetCaption("U-Boot", "U-Boot");
+
+	sdl.width = width;
+	sdl.height = height;
+	sdl.depth = 1 << log2_bpp;
+	sdl.pitch = sdl.width * sdl.depth / 8;
+	sdl.screen = SDL_SetVideoMode(width, height, 0, 0);
+	sandbox_sdl_poll_events();
+
+	return 0;
+}
+
+int sandbox_sdl_sync(void *lcd_base)
+{
+	SDL_Surface *frame;
+
+	frame = SDL_CreateRGBSurfaceFrom(lcd_base, sdl.width, sdl.height,
+			sdl.depth, sdl.pitch,
+			0x1f << 11, 0x3f << 5, 0x1f << 0, 0);
+	SDL_BlitSurface(frame, NULL, sdl.screen, NULL);
+	SDL_FreeSurface(frame);
+	SDL_UpdateRect(sdl.screen, 0, 0, 0, 0);
+	sandbox_sdl_poll_events();
+
+	return 0;
+}
+
+#define NONE (-1)
+#define NUM_SDL_CODES	(SDLK_UNDO + 1)
+
+static int16_t sdl_to_keycode[NUM_SDL_CODES] = {
+	/* 0 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, KEY_BACKSPACE, KEY_TAB,
+	NONE, NONE, NONE, KEY_ENTER, NONE,
+	NONE, NONE, NONE, NONE, KEY_POWER,	/* use PAUSE as POWER */
+
+	/* 20 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, KEY_ESC, NONE, NONE,
+	NONE, NONE, KEY_SPACE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 40 */
+	NONE, NONE, NONE, NONE, KEY_COMMA,
+	KEY_MINUS, KEY_DOT, KEY_SLASH, KEY_0, KEY_1,
+	KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
+	KEY_7, KEY_8, KEY_9, NONE, KEY_SEMICOLON,
+
+	/* 60 */
+	NONE, KEY_EQUAL, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 80 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, KEY_BACKSLASH, NONE, NONE,
+	NONE, KEY_GRAVE, KEY_A, KEY_B, KEY_C,
+
+	/* 100 */
+	KEY_D, KEY_E, KEY_F, KEY_G, KEY_H,
+	KEY_I, KEY_J, KEY_K, KEY_L, KEY_M,
+	KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R,
+	KEY_S, KEY_T, KEY_U, KEY_V, KEY_W,
+
+	/* 120 */
+	KEY_X, KEY_Y, KEY_Z, NONE, NONE,
+	NONE, NONE, KEY_DELETE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 140 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 160 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 180 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 200 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 220 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 240 */
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+	NONE, KEY_KP0, KEY_KP1, KEY_KP2, KEY_KP3,
+
+	/* 260 */
+	KEY_KP4, KEY_KP5, KEY_KP6, KEY_KP7, KEY_KP8,
+	KEY_KP9, KEY_KPDOT, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS,
+	KEY_KPPLUS, KEY_KPENTER, KEY_KPEQUAL, KEY_UP, KEY_DOWN,
+	KEY_RIGHT, KEY_LEFT, KEY_INSERT, KEY_HOME, KEY_END,
+
+	/* 280 */
+	KEY_PAGEUP, KEY_PAGEDOWN, KEY_F1, KEY_F2, KEY_F3,
+	KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8,
+	KEY_F9, KEY_F10, KEY_F11, KEY_F12, NONE,
+	NONE, NONE, NONE, NONE, NONE,
+
+	/* 300 */
+	KEY_NUMLOCK, KEY_CAPSLOCK, KEY_SCROLLLOCK, KEY_RIGHTSHIFT,
+		KEY_LEFTSHIFT,
+	KEY_RIGHTCTRL, KEY_LEFTCTRL, KEY_RIGHTALT, KEY_LEFTALT, KEY_RIGHTMETA,
+	KEY_LEFTMETA, NONE, KEY_FN, NONE, KEY_COMPOSE,
+	NONE, KEY_PRINT, KEY_SYSRQ, KEY_PAUSE, NONE,
+
+	/* 320 */
+	NONE, NONE, NONE,
+};
+
+int sandbox_sdl_scan_keys(int key[], int max_keys)
+{
+	Uint8 *keystate;
+	int i, count;
+
+	sandbox_sdl_poll_events();
+	keystate = SDL_GetKeyState(NULL);
+	for (i = count = 0; i < NUM_SDL_CODES; i++) {
+		if (count >= max_keys)
+			break;
+		else if (keystate[i])
+			key[count++] = sdl_to_keycode[i];
+	}
+
+	return count;
+}
+
+int sandbox_sdl_key_pressed(int keycode)
+{
+	int key[8];	/* allow up to 8 keys to be pressed at once */
+	int count;
+	int i;
+
+	count = sandbox_sdl_scan_keys(key, sizeof(key) / sizeof(key[0]));
+	for (i = 0; i < count; i++) {
+		if (key[i] == keycode)
+			return 0;
+	}
+
+	return -ENOENT;
+}
+
+void sandbox_sdl_fill_audio(void *udata, Uint8 *stream, int len)
+{
+	int avail;
+
+	avail = sdl.audio_size - sdl.audio_pos;
+	if (avail < len)
+		len = avail;
+
+	SDL_MixAudio(stream, sdl.audio_data + sdl.audio_pos, len,
+		     SDL_MIX_MAXVOLUME);
+	sdl.audio_pos += len;
+
+	/* Loop if we are at the end */
+	if (sdl.audio_pos == sdl.audio_size)
+		sdl.audio_pos = 0;
+}
+
+int sandbox_sdl_sound_init(void)
+{
+	SDL_AudioSpec wanted;
+
+	if (sandbox_sdl_ensure_init())
+		return -1;
+
+	if (sdl.audio_active)
+		return 0;
+
+	/*
+	 * At present all sandbox sounds crash. This is probably due to
+	 * symbol name conflicts with U-Boot. We can remove the malloc()
+	 * probles with:
+	 *
+	 * #define USE_DL_PREFIX
+	 *
+	 * and get this:
+	 *
+	 * Assertion 'e->pollfd->fd == e->fd' failed at pulse/mainloop.c:676,
+	 *		function dispatch_pollfds(). Aborting.
+	 *
+	 * The right solution is probably to make U-Boot's names private or
+	 * link os.c and sdl.c against their libraries before liking with
+	 * U-Boot. TBD. For now sound is disabled.
+	 */
+	printf("(Warning: sandbox sound disabled)\n");
+	return 0;
+
+	/* Set the audio format */
+	wanted.freq = 22050;
+	wanted.format = AUDIO_S16;
+	wanted.channels = 1;    /* 1 = mono, 2 = stereo */
+	wanted.samples = 1024;  /* Good low-latency value for callback */
+	wanted.callback = sandbox_sdl_fill_audio;
+	wanted.userdata = NULL;
+
+	sdl.audio_size = sizeof(uint16_t) * wanted.freq;
+	sdl.audio_data = malloc(sdl.audio_size);
+	if (!sdl.audio_data) {
+		printf("%s: Out of memory\n", __func__);
+		return -1;
+	}
+	sdl.audio_pos = 0;
+
+	if (SDL_InitSubSystem(SDL_INIT_AUDIO) < 0) {
+		printf("Unable to initialize SDL audio: %s\n", SDL_GetError());
+		goto err;
+	}
+
+	/* Open the audio device, forcing the desired format */
+	if (SDL_OpenAudio(&wanted, NULL) < 0) {
+		printf("Couldn't open audio: %s\n", SDL_GetError());
+		goto err;
+	}
+	sdl.audio_active = true;
+
+	return 0;
+
+err:
+	free(sdl.audio_data);
+	return -1;
+}
+
+int sandbox_sdl_sound_start(uint frequency)
+{
+	if (!sdl.audio_active)
+		return -1;
+	sdl.frequency = frequency;
+	sound_create_square_wave((unsigned short *)sdl.audio_data,
+				 sdl.audio_size, frequency);
+	sdl.audio_pos = 0;
+	SDL_PauseAudio(0);
+
+	return 0;
+}
+
+int sandbox_sdl_sound_stop(void)
+{
+	if (!sdl.audio_active)
+		return -1;
+	SDL_PauseAudio(1);
+
+	return 0;
+}

arch/sandbox/cpu/start.c

@@ -107,6 +107,16 @@ static int sandbox_cmdline_cb_interactive(struct sandbox_state *state,
 
 SANDBOX_CMDLINE_OPT_SHORT(interactive, 'i', 0, "Enter interactive mode");
 
+static int sandbox_cmdline_cb_jump(struct sandbox_state *state,
+				   const char *arg)
+{
+	/* Remember to delete this U-Boot image later */
+	state->jumped_fname = arg;
+
+	return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(jump, 'j', 1, "Jumped from previous U-Boot");
+
 static int sandbox_cmdline_cb_memory(struct sandbox_state *state,
 				     const char *arg)
 {
@@ -126,6 +136,15 @@ static int sandbox_cmdline_cb_memory(struct sandbox_state *state,
 SANDBOX_CMDLINE_OPT_SHORT(memory, 'm', 1,
 			  "Read/write ram_buf memory contents from file");
 
+static int sandbox_cmdline_cb_rm_memory(struct sandbox_state *state,
+					const char *arg)
+{
+	state->ram_buf_rm = true;
+
+	return 0;
+}
+SANDBOX_CMDLINE_OPT(rm_memory, 0, "Remove memory file after reading");
+
 static int sandbox_cmdline_cb_state(struct sandbox_state *state,
 				    const char *arg)
 {
@@ -159,6 +178,43 @@ static int sandbox_cmdline_cb_ignore_missing(struct sandbox_state *state,
 SANDBOX_CMDLINE_OPT_SHORT(ignore_missing, 'n', 0,
 			  "Ignore missing state on read");
 
+static int sandbox_cmdline_cb_show_lcd(struct sandbox_state *state,
+				       const char *arg)
+{
+	state->show_lcd = true;
+	return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(show_lcd, 'l', 0,
+			  "Show the sandbox LCD display");
+
+static const char *term_args[STATE_TERM_COUNT] = {
+	"raw-with-sigs",
+	"raw",
+	"cooked",
+};
+
+static int sandbox_cmdline_cb_terminal(struct sandbox_state *state,
+				       const char *arg)
+{
+	int i;
+
+	for (i = 0; i < STATE_TERM_COUNT; i++) {
+		if (!strcmp(arg, term_args[i])) {
+			state->term_raw = i;
+			return 0;
+		}
+	}
+
+	printf("Unknown terminal setting '%s' (", arg);
+	for (i = 0; i < STATE_TERM_COUNT; i++)
+		printf("%s%s", i ? ", " : "", term_args[i]);
+	puts(")\n");
+
+	return 1;
+}
+SANDBOX_CMDLINE_OPT_SHORT(terminal, 't', 1,
+			  "Set terminal to raw/cooked mode");
+
 int main(int argc, char *argv[])
 {
 	struct sandbox_state *state;
@@ -176,6 +232,10 @@ int main(int argc, char *argv[])
 	if (ret)
 		goto err;
 
+	/* Remove old memory file if required */
+	if (state->ram_buf_rm && state->ram_buf_fname)
+		os_unlink(state->ram_buf_fname);
+
 	/* Do pre- and post-relocation init */
 	board_init_f(0);
 

arch/sandbox/cpu/state.c

@@ -365,7 +365,7 @@ int state_uninit(void)
 
 	state = &main_state;
 
-	if (state->write_ram_buf) {
+	if (state->write_ram_buf && !state->ram_buf_rm) {
 		err = os_write_ram_buf(state->ram_buf_fname);
 		if (err) {
 			printf("Failed to write RAM buffer\n");
@@ -380,6 +380,10 @@ int state_uninit(void)
 		}
 	}
 
+	/* Delete this at the last moment so as not to upset gdb too much */
+	if (state->jumped_fname)
+		os_unlink(state->jumped_fname);
+
 	if (state->state_fdt)
 		os_free(state->state_fdt);
 	memset(state, '\0', sizeof(*state));

arch/sandbox/dts/sandbox.dts

@@ -17,4 +17,100 @@
 		colour = "white";
 		sides = <6>;
 	};
+
+	host@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "sandbox,host-emulation";
+		cros-ec@0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+
+			/*
+			 * This describes the flash memory within the EC. Note
+			 * that the STM32L flash erases to 0, not 0xff.
+			 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			flash@8000000 {
+				reg = <0x08000000 0x20000>;
+				erase-value = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* Information for sandbox */
+				ro {
+					reg = <0 0xf000>;
+				};
+				wp-ro {
+					reg = <0xf000 0x1000>;
+				};
+				rw {
+					reg = <0x10000 0x10000>;
+				};
+			};
+		};
+	};
+
+	lcd {
+		compatible = "sandbox,lcd-sdl";
+		xres = <800>;
+		yres = <600>;
+	};
+
+	cros-ec-keyb {
+		compatible = "google,cros-ec-keyb";
+		google,key-rows = <8>;
+		google,key-columns = <13>;
+		google,repeat-delay-ms = <240>;
+		google,repeat-rate-ms = <30>;
+		google,ghost-filter;
+		/*
+		 * Keymap entries take the form of 0xRRCCKKKK where
+		 * RR=Row CC=Column KKKK=Key Code
+		 * The values below are for a US keyboard layout and
+		 * are taken from the Linux driver. Note that the
+		 * 102ND key is not used for US keyboards.
+		 */
+		linux,keymap = <
+			/* CAPSLCK F1         B          F10     */
+			0x0001003a 0x0002003b 0x00030030 0x00040044
+			/* N       =          R_ALT      ESC     */
+			0x00060031 0x0008000d 0x000a0064 0x01010001
+			/* F4      G          F7         H       */
+			0x0102003e 0x01030022 0x01040041 0x01060023
+			/* '       F9         BKSPACE    L_CTRL  */
+			0x01080028 0x01090043 0x010b000e 0x0200001d
+			/* TAB     F3         T          F6      */
+			0x0201000f 0x0202003d 0x02030014 0x02040040
+			/* ]       Y          102ND      [       */
+			0x0205001b 0x02060015 0x02070056 0x0208001a
+			/* F8      GRAVE      F2         5       */
+			0x02090042 0x03010029 0x0302003c 0x03030006
+			/* F5      6          -          \       */
+			0x0304003f 0x03060007 0x0308000c 0x030b002b
+			/* R_CTRL  A          D          F       */
+			0x04000061 0x0401001e 0x04020020 0x04030021
+			/* S       K          J          ;       */
+			0x0404001f 0x04050025 0x04060024 0x04080027
+			/* L       ENTER      Z          C       */
+			0x04090026 0x040b001c 0x0501002c 0x0502002e
+			/* V       X          ,          M       */
+			0x0503002f 0x0504002d 0x05050033 0x05060032
+			/* L_SHIFT /          .          SPACE   */
+			0x0507002a 0x05080035 0x05090034 0x050B0039
+			/* 1       3          4          2       */
+			0x06010002 0x06020004 0x06030005 0x06040003
+			/* 8       7          0          9       */
+			0x06050009 0x06060008 0x0608000b 0x0609000a
+			/* L_ALT   DOWN       RIGHT      Q       */
+			0x060a0038 0x060b006c 0x060c006a 0x07010010
+			/* E       R          W          I       */
+			0x07020012 0x07030013 0x07040011 0x07050017
+			/* U       R_SHIFT    P          O       */
+			0x07060016 0x07070036 0x07080019 0x07090018
+			/* UP      LEFT    */
+			0x070b0067 0x070c0069>;
+	};
+
 };

arch/sandbox/include/asm/arch-sandbox/sound.h

@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SANDBOX_SOUND_H
+#define __SANDBOX_SOUND_H
+
+int sound_play(unsigned int msec, unsigned int frequency);
+
+int sound_init(const void *blob);
+
+#endif

arch/sandbox/include/asm/sdl.h

@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SANDBOX_SDL_H
+#define __SANDBOX_SDL_H
+
+#include <errno.h>
+
+#ifdef CONFIG_SANDBOX_SDL
+
+/**
+ * sandbox_sdl_init_display() - Set up SDL video ready for use
+ *
+ * @width:	Window width in pixels
+ * @height	Window height in pixels
+ * @log2_bpp:	Log to base 2 of the number of bits per pixel. So a 32bpp
+ *		display will pass 5, since 2*5 = 32
+ * @return 0 if OK, -ENODEV if no device, -EIO if SDL failed to initialize
+ *		and -EPERM if the video failed to come up.
+ */
+int sandbox_sdl_init_display(int width, int height, int log2_bpp);
+
+/**
+ * sandbox_sdl_sync() - Sync current U-Boot LCD frame buffer to SDL
+ *
+ * This must be called periodically to update the screen for SDL so that the
+ * user can see it.
+ *
+ * @lcd_base: Base of frame buffer
+ * @return 0 if screen was updated, -ENODEV is there is no screen.
+ */
+int sandbox_sdl_sync(void *lcd_base);
+
+/**
+ * sandbox_sdl_scan_keys() - scan for pressed keys
+ *
+ * Works out which keys are pressed and returns a list
+ *
+ * @key:	Array to receive keycodes
+ * @max_keys:	Size of array
+ * @return number of keycodes found, 0 if none, -ENODEV if no keyboard
+ */
+int sandbox_sdl_scan_keys(int key[], int max_keys);
+
+/**
+ * sandbox_sdl_key_pressed() - check if a particular key is pressed
+ *
+ * @keycode:	Keycode to check (KEY_... - see include/linux/input.h
+ * @return 0 if pressed, -ENOENT if not pressed. -ENODEV if keybord not
+ * available,
+ */
+int sandbox_sdl_key_pressed(int keycode);
+
+/**
+ * sandbox_sdl_sound_start() - start playing a sound
+ *
+ * @frequency:	Frequency of sounds in Hertz
+ * @return 0 if OK, -ENODEV if no sound is available
+ */
+int sandbox_sdl_sound_start(uint frequency);
+
+/**
+ * sandbox_sdl_sound_stop() - stop playing a sound
+ *
+ * @return 0 if OK, -ENODEV if no sound is available
+ */
+int sandbox_sdl_sound_stop(void);
+
+/**
+ * sandbox_sdl_sound_init() - set up the sound system
+ *
+ * @return 0 if OK, -ENODEV if no sound is available
+ */
+int sandbox_sdl_sound_init(void);
+
+#else
+static inline int sandbox_sdl_init_display(int width, int height,
+					    int log2_bpp)
+{
+	return -ENODEV;
+}
+
+static inline int sandbox_sdl_sync(void *lcd_base)
+{
+	return -ENODEV;
+}
+
+static inline int sandbox_sdl_scan_keys(int key[], int max_keys)
+{
+	return -ENODEV;
+}
+
+static inline int sandbox_sdl_key_pressed(int keycode)
+{
+	return -ENODEV;
+}
+
+static inline int sandbox_sdl_sound_start(uint frequency)
+{
+	return -ENODEV;
+}
+
+static inline int sandbox_sdl_sound_stop(void)
+{
+	return -ENODEV;
+}
+
+static inline int sandbox_sdl_sound_init(void)
+{
+	return -ENODEV;
+}
+
+#endif
+
+#endif

arch/sandbox/include/asm/state.h

@@ -17,6 +17,29 @@ enum exit_type_id {
 	STATE_EXIT_POWER_OFF,
 };
 
+/**
+ * Selects the behavior of the serial terminal.
+ *
+ * If Ctrl-C is processed by U-Boot, then the only way to quit sandbox is with
+ * the 'reset' command, or equivalent.
+ *
+ * If the terminal is cooked, then Ctrl-C will terminate U-Boot, and the
+ * command line will not be quite such a faithful emulation.
+ *
+ * Options are:
+ *
+ *	raw-with-sigs		- Raw, but allow signals (Ctrl-C will quit)
+ *	raw			- Terminal is always raw
+ *	cooked			- Terminal is always cooked
+ */
+enum state_terminal_raw {
+	STATE_TERM_RAW_WITH_SIGS,	/* Default */
+	STATE_TERM_RAW,
+	STATE_TERM_COOKED,
+
+	STATE_TERM_COUNT,
+};
+
 struct sandbox_spi_info {
 	const char *spec;
 	const struct sandbox_spi_emu_ops *ops;
@@ -30,16 +53,20 @@ struct sandbox_state {
 	enum exit_type_id exit_type;	/* How we exited U-Boot */
 	const char *parse_err;		/* Error to report from parsing */
 	int argc;			/* Program arguments */
-	char **argv;
+	char **argv;			/* Command line arguments */
+	const char *jumped_fname;	/* Jumped from previous U_Boot */
 	uint8_t *ram_buf;		/* Emulated RAM buffer */
 	unsigned int ram_size;		/* Size of RAM buffer */
 	const char *ram_buf_fname;	/* Filename to use for RAM buffer */
+	bool ram_buf_rm;		/* Remove RAM buffer file after read */
 	bool write_ram_buf;		/* Write RAM buffer on exit */
 	const char *state_fname;	/* File containing sandbox state */
 	void *state_fdt;		/* Holds saved state for sandbox */
 	bool read_state;		/* Read sandbox state on startup */
 	bool write_state;		/* Write sandbox state on exit */
 	bool ignore_missing_state_on_read;	/* No error if state missing */
+	bool show_lcd;			/* Show LCD on start-up */
+	enum state_terminal_raw term_raw;	/* Terminal raw/cooked */
 
 	/* Pointer to information for each SPI bus/cs */
 	struct sandbox_spi_info spi[CONFIG_SANDBOX_SPI_MAX_BUS]

arch/sandbox/include/asm/u-boot-sandbox.h

@@ -25,4 +25,7 @@ int sandbox_main_loop_init(void);
 
 int cleanup_before_linux(void);
 
+/* drivers/video/sandbox_sdl.c */
+int sandbox_lcd_sdl_early_init(void);
+
 #endif	/* _U_BOOT_SANDBOX_H_ */

arch/sh/include/asm/cpu_sh7722.h

@@ -1250,8 +1250,9 @@
 #define PUDR        0xA4050162
 #define PVDR        0xA4050164
 #define PWDR        0xA4050166
-#define PYDR        0xA4050168
-#define PZDR        0xA405016A
+#define PXDR        0xA4050168
+#define PYDR        0xA405016A
+#define PZDR        0xA405016C
 
 /*	UBC	*/
 #define CBR0        0xFF200000

arch/sh/include/asm/cpu_sh7723.h

@@ -178,8 +178,9 @@
 #define PUDR        0xA4050162
 #define PVDR        0xA4050164
 #define PWDR        0xA4050166
-#define PYDR        0xA4050168
-#define PZDR        0xA405016A
+#define PXDR        0xA4050168
+#define PYDR        0xA405016A
+#define PZDR        0xA405016C
 
 /* UBC */
 /* H-UDI */

arch/sh/include/asm/cpu_sh7724.h

@@ -200,8 +200,9 @@
 #define PUDR        0xA4050162
 #define PVDR        0xA4050164
 #define PWDR        0xA4050166
-#define PYDR        0xA4050168
-#define PZDR        0xA405016A
+#define PXDR        0xA4050168
+#define PYDR        0xA405016A
+#define PZDR        0xA405016C
 
 /* Ether */
 #define EDMR		0xA4600000

arch/x86/config.mk

@@ -29,6 +29,4 @@ LDFLAGS_FINAL += --wrap=__divdi3 --wrap=__udivdi3
 LDFLAGS_FINAL += --wrap=__moddi3 --wrap=__umoddi3
 
 export NORMAL_LIBGCC = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
-PREFIXED_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/$(shell basename $(NORMAL_LIBGCC))
-
-CONFIG_USE_PRIVATE_LIBGCC=$(shell dirname $(PREFIXED_LIBGCC))
+CONFIG_USE_PRIVATE_LIBGCC := arch/x86/lib

arch/x86/lib/Makefile

@@ -23,5 +23,6 @@ obj-$(CONFIG_CMD_ZBOOT)	+= zimage.o
 LIBGCC := $(notdir $(NORMAL_LIBGCC))
 extra-y := $(LIBGCC)
 
-$(obj)/$(LIBGCC): $(NORMAL_LIBGCC)
-	$(OBJCOPY) $< $@ --prefix-symbols=__normal_
+OBJCOPYFLAGS := --prefix-symbols=__normal_
+$(obj)/$(LIBGCC): $(NORMAL_LIBGCC) FORCE
+	$(call if_changed,objcopy)

board/BuR/kwb/board.c

@@ -120,7 +120,7 @@ void am33xx_spl_board_init(void)
 
 	/* power-ON  3V3 via Resetcontroller */
 	oldspeed = i2c_get_bus_speed();
-	if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) {
+	if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) {
 		buf = RSTCTRL_FORCE_PWR_NEN;
 		i2c_write(RSTCTRL_ADDR, RSTCTRL_CTRLREG, 1,
 			  (uint8_t *)&buf, sizeof(buf));
@@ -221,7 +221,7 @@ int board_late_init(void)
 			   TPS65217_WLEDCTRL1, 0x09, 0xFF);
 	/* write bootinfo into scratchregister of resetcontroller */
 	oldspeed = i2c_get_bus_speed();
-	if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) {
+	if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) {
 		i2c_write(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1,
 			  (uint8_t *)&buf, sizeof(buf));
 		i2c_set_bus_speed(oldspeed);

board/ait/cam_enc_4xx/config.mk

@@ -7,7 +7,7 @@
 # (mem base + reserved)
 #
 
-UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg
+UBL_CONFIG = $(srctree)/board/$(BOARDDIR)/ublimage.cfg
 ifndef CONFIG_SPL_BUILD
 ALL-y += u-boot.ubl
 else

board/altera/socfpga/pll_config.h

@@ -0,0 +1,118 @@
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier:    BSD-3-Clause
+ */
+
+/* This file is generated by Preloader Generator */
+
+#ifndef _PRELOADER_PLL_CONFIG_H_
+#define _PRELOADER_PLL_CONFIG_H_
+
+/* PLL configuration data */
+/* Main PLL */
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM			(0)
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER			(63)
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT		(3)
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT	(3)
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT	(12)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK		(0)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK		(0)
+/*
+ * To tell where is the clock source:
+ * 0 = MAINPLL
+ * 1 = PERIPHPLL
+ */
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP		(1)
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP		(1)
+
+/* Peripheral PLL */
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM			(1)
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER			(79)
+/*
+ * To tell where is the VCOs source:
+ * 0 = EOSC1
+ * 1 = EOSC2
+ * 2 = F2S
+ */
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC			(0)
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT		(3)
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT		(3)
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT		(1)
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT	(4)
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT		(4)
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT		(9)
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK			(0)
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK		(0)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK		(1)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK		(1)
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK		(6249)
+/*
+ * To tell where is the clock source:
+ * 0 = F2S_PERIPH_REF_CLK
+ * 1 = MAIN_CLK
+ * 2 = PERIPH_CLK
+ */
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC			(2)
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND			(2)
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI			(1)
+
+/* SDRAM PLL */
+#ifdef CONFIG_SOCFPGA_ARRIA5
+/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz
+ * This if..else... is not required if generated by tools */
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM			(2)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER			(127)
+#else
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM			(0)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER			(31)
+#endif /* CONFIG_SOCFPGA_ARRIA5 */
+
+/*
+ * To tell where is the VCOs source:
+ * 0 = EOSC1
+ * 1 = EOSC2
+ * 2 = F2S
+ */
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC			(0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT		(1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT		(1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE		(4)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT		(5)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE		(0)
+
+/* Info for driver */
+#define CONFIG_HPS_CLK_OSC1_HZ			(25000000)
+#define CONFIG_HPS_CLK_MAINVCO_HZ		(1600000000)
+#define CONFIG_HPS_CLK_PERVCO_HZ		(1000000000)
+#ifdef CONFIG_SOCFPGA_ARRIA5
+/* The if..else... is not required if generated by tools */
+#define CONFIG_HPS_CLK_SDRVCO_HZ		(1066000000)
+#else
+#define CONFIG_HPS_CLK_SDRVCO_HZ		(800000000)
+#endif
+#define CONFIG_HPS_CLK_EMAC0_HZ			(250000000)
+#define CONFIG_HPS_CLK_EMAC1_HZ			(250000000)
+#define CONFIG_HPS_CLK_USBCLK_HZ		(200000000)
+#define CONFIG_HPS_CLK_NAND_HZ			(50000000)
+#define CONFIG_HPS_CLK_SDMMC_HZ			(200000000)
+#define CONFIG_HPS_CLK_QSPI_HZ			(400000000)
+#define CONFIG_HPS_CLK_SPIM_HZ			(200000000)
+#define CONFIG_HPS_CLK_CAN0_HZ			(100000000)
+#define CONFIG_HPS_CLK_CAN1_HZ			(100000000)
+#define CONFIG_HPS_CLK_GPIODB_HZ		(32000)
+#define CONFIG_HPS_CLK_L4_MP_HZ			(100000000)
+#define CONFIG_HPS_CLK_L4_SP_HZ			(100000000)
+
+#endif /* _PRELOADER_PLL_CONFIG_H_ */

board/avnet/fx12mm/Makefile

@@ -8,4 +8,4 @@
 
 obj-y	+= fx12mm.o
 
-include $(SRCTREE)/board/xilinx/ppc405-generic/Makefile
+include $(srctree)/board/xilinx/ppc405-generic/Makefile

board/avnet/v5fx30teval/Makefile

@@ -8,4 +8,4 @@
 
 obj-y	+= v5fx30teval.o
 
-include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
+include $(srctree)/board/xilinx/ppc440-generic/Makefile

board/corscience/tricorder/tricorder.c

@@ -79,6 +79,8 @@ static void get_eeprom(struct tricorder_eeprom *eeprom)
 		} else {
 			panic("Could not get board revision\n");
 		}
+	} else {
+		memset(eeprom, 0, TRICORDER_EEPROM_SIZE);
 	}
 }
 

board/cray/L1/Makefile

@@ -9,10 +9,19 @@ obj-y	= L1.o flash.o
 obj-y	+= init.o
 obj-y	+= bootscript.o
 
-$(obj)/bootscript.c: $(obj)/bootscript.image
-	od -t x1 -v -A x $^ | awk -f $(srctree)/$(src)/x2c.awk > $@
+quiet_cmd_awk = AWK     $@
+      cmd_awk = od -t x1 -v -A x $< | $(AWK) -f $(filter-out $<,$^) > $@
 
+$(obj)/bootscript.c: $(obj)/bootscript.image $(src)/x2c.awk
+	$(call cmd,awk)
+
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+        $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+MKIMAGEFLAGS_bootscript.image := -A ppc -O linux -T script -C none \
+						-a 0 -e 0 -n bootscript
 $(obj)/bootscript.image: $(src)/bootscript.hush
-	-$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $< $@
+	$(call cmd,mkimage)
 
 clean-files := bootscript.c bootscript.image

board/denx/m53evk/m53evk.c

@@ -31,24 +31,41 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static uint32_t mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+	/*
+	 * WARNING: We must override get_effective_memsize() function here
+	 * to report only the size of the first DRAM bank. This is to make
+	 * U-Boot relocator place U-Boot into valid memory, that is, at the
+	 * end of the first DRAM bank. If we did not override this function
+	 * like so, U-Boot would be placed at the address of the first DRAM
+	 * bank + total DRAM size - sizeof(uboot), which in the setup where
+	 * each DRAM bank contains 512MiB of DRAM would result in placing
+	 * U-Boot into invalid memory area close to the end of the first
+	 * DRAM bank.
+	 */
+	return mx53_dram_size[0];
+}
+
 int dram_init(void)
 {
-	u32 size1, size2;
+	mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+	mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
 
-	size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
-	gd->ram_size = size1 + size2;
+	gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
 
 	return 0;
 }
+
 void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[0].size = mx53_dram_size[0];
 
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	gd->bd->bi_dram[1].size = mx53_dram_size[1];
 }
 
 static void setup_iomux_uart(void)

board/freescale/mx53loco/mx53loco.c

@@ -30,24 +30,41 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static uint32_t mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+	/*
+	 * WARNING: We must override get_effective_memsize() function here
+	 * to report only the size of the first DRAM bank. This is to make
+	 * U-Boot relocator place U-Boot into valid memory, that is, at the
+	 * end of the first DRAM bank. If we did not override this function
+	 * like so, U-Boot would be placed at the address of the first DRAM
+	 * bank + total DRAM size - sizeof(uboot), which in the setup where
+	 * each DRAM bank contains 512MiB of DRAM would result in placing
+	 * U-Boot into invalid memory area close to the end of the first
+	 * DRAM bank.
+	 */
+	return mx53_dram_size[0];
+}
+
 int dram_init(void)
 {
-	u32 size1, size2;
+	mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+	mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
 
-	size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
-	gd->ram_size = size1 + size2;
+	gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
 
 	return 0;
 }
+
 void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[0].size = mx53_dram_size[0];
 
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	gd->bd->bi_dram[1].size = mx53_dram_size[1];
 }
 
 u32 get_board_rev(void)